Carbon

Article	Citations
Corrigendum to “Maximizing Schottky barrier modulation in graphene-WSe2/MoSe2 heterojunction barristor through Dirac-cone induced phenomenon” [Carbon 221 (2024) 118920]	298
The relationship between the high-frequency performance of supercapacitors and the type of doped nitrogen in the carbon electrode	276
Design, progress and challenges of 3D carbon-based thermally conductive networks	265
Experimental strategies to fabricate mechanically exfoliated graphene sub-nanofluidic devices	235
Vertically aligned carbon nanotubes from premade binary metal oxide nanoparticles on bare SiO2	227
Editorial Board	211
Direct band gap conversion and transport properties modification of diamond polytypes via strain engineering	207
Improved electrochemical performance of sandwich-structured N-rich C@MnO2@C electrodes	204
Experimental and theoretical study on the role of 2D Ti3C2Tx MXenes on superior charge transport and ultra-broadband photodetection in MXene/Bi2S3 nanorod composite through local Schottky junctions	188
Ionic liquid-induced exfoliation of graphitic carbon nitride adsorbent for hydrogen storage	185
C60 filling-enabled tribological improvement of graphene in conformal contact with a rough substrate	185
Graphene coated lithium foil anode enables long cycle life Li metal pouch cells	182
Three-dimensional nanoporous heterojunction of CdS/np-rGO for highly efficient photocatalytic hydrogen evolution under visible light	179
Photothermal-thermoelectric composite film with excellent self-healing and low temperature resistance properties for electromagnetic wave shielding and absorption	178
Effect of oxidation degree on photoactivity, physicochemical properties and oxidative potential changes of graphene-based materials under visible light irradiation	173
A strategy to improve tribological performances of solvent-based phenol−formaldehyde resin by using oil-containing nanocapsules	173
Hierarchically porous carbon with heteroatom doping for the application of Zn-ion capacitors	173
Tailoring aligned and densified carbon nanotube@graphene coaxial yarn for 3D thermally conductive networks	172
Back interface management by multifunctional composite carbon nanospheres electrode for efficient and stable HTL-free carbon-based perovskite solar cells	167
Carbon dots inspired upgradable hierarchical carbon for enhanced tetracycline adsorption	164
Reversible aggregation of carbon nanohorns triggered by electrostatic interactions	163
Optical emission spectroscopy-assisted optimization of single crystal diamond growth process in high CO2 content CO2–CH4–H2-Ar atmosphere	162
Ordered alignment of 2D heterogeneous filler for enhancing anisotropic thermal conduction capability of multifunctional composite	161
Experimental and theoretical investigations of covalent functionalization of 1D/2D carbon-based buckypaper via aryl diazonium chemistry for high-performance energy storage	161
Construction of CoO/Co9S8/NC composites with low-frequency and broadband electromagnetic wave absorption	160

Seed-assisted in situ ZIF-8 growth on carbon nanofibers for enhanced microwave absorption	159
Facile design and enhanced interface polarization of CoFe-PBA/MXene towards microwave absorption, EMI shielding and energy storage	159
Resonant Raman in armchair graphene nanoribbons from first-principles	159
Surface modification of carbon fiber cloth with graphene oxide through an electrophoresis method for lithium metal anode	158
Carbon quantum dots in hard carbon: An approach to achieving PIB anodes with high potassium adsorption	157
Heterostructured MoO2@rGO facilitates enhanced kinetics in lithium-sulfur battery	156
Drastically reduced thermal conductivity of self-bundled single-walled carbon nanotube	153
Biomimetic soft actuator: Rapid response to multiple stimuli with programmable control	152
Changes of porosity of hard carbons during mechanical treatment and the relevance for sodium-ion anodes	152
Robust biomimetic Ti3C2Tx nanocomposite films enhanced by mussel-inspired polymer for highly efficient electromagnetic shielding and thermal camouflage	152
Graphite oxide by “chlorate route” oxidation without HNO3: Does acid matter?	150
Few-layered graphene from cathodic exfoliation in binary solvents and application as a protective layer for lithium metal anodes	149
A B,N co-doped carbon nanotube array with anchored MnO2 nanosheets as a flexible cathode for aqueous zinc-ion batteries	149
Direct spectroscopic evidence of increased stiffness in a series of similarly sized nanopolycrystalline diamond-lonsdaleite grains in Popigai impact diamonds	147
Self-amplifying ROS-responsive SN38 prodrug nanoparticles for combined chemotherapy and ferroptosis in cancer treatment	146
Synergistic ductility deformation and helical design of carbon nanotube fiber composites	145
Research progress on carbon-based non-metallic nanomaterials as catalysts for the two-electron oxygen reduction for hydrogen peroxide production	144
Advanced analysis of the X-ray diffraction profile of carbon	143
Nanometer-level temperature mapping of Joule-heated carbon nanotubes by plasmon spectroscopy	136
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required	136
Pressure-dependent thermal conductivity transient measurement of graphene	135
Fabrication and characterization of a microreactor made of Pd-loaded carbonized tracheids thin plates (CTP)	132
A review of the use of MXenes as hosts in lithium metal anodes and the anode formation	132
Carbonization of hydrothermally pre-treated algae using terephthalaldehyde and Mg salts	131
Editorial Board	130
The factors that influence the electrochemical behavior of lithium metal anodes: Electron transfer and Li-ion transport	129
In-situ construction of volcanic rock-like structures in Yb2O3 modified reduced graphene oxide and their boosted electromagnetic wave absorbing properties	129
Understand the effect of the confinedtrifluoromethane sulfonate (OTf−) anions by the adjacent MXene nanosheets on oriented design of Zn ion storage	128
Research progress on tantalum carbide coatings on carbon materials	126
Excitonic effects on the linear and nonlinear optical properties of solid C60 fullerene, insights from many-body first-principles calculations	125
Pore-size control of soft mesoporous carbon by hot pressing	124
Hydrophilic carbon monoliths derived from metal-organic frameworks@resorcinol-formaldehyde resin for atmospheric water harvesting	124
Crystallinity and composition engineering of organic crystal derived 1D carbons for advanced Li-metal based batteries	124
Transforming waste polyethylene terephthalate (PET) into high-performance activated carbon-supported composites for pollutant degradation: A synergy of experiments and DFT insights	122
Replication of mechanochemical syntheses of γ-graphyne from calcium carbide fails to produce the claimed product	121
Two-color laser driven enhanced electron emission from carbon nanotubes with long carrier lifetime	121
Na-catalyzed rapid synthesis and characterization of intercalated graphite CaC6	120
Enhanced electrochemical ozone production via sp2 carbon content optimization in boron doped diamond electrodes using laser micromachining	120
Designing CNT-implanted graphite felt as a sustainable electron network for long-cycling of vanadium redox flow batteries	120
Heteroatoms doped carbon decorated with tiny amount Pt nanoparticles as a bifunctional catalyst for hydrogen and chlorine generation from seawater	119
Defect formation and bending properties in graphite under He atom implantation investigated by molecular dynamics method	119
Synthesis of crown-ether-embedded graphene by the solution plasma	116
Ion implantation-driven high-quality graphene growth on insulating substrates with catalyst spatial confinement	115
Scalable Sulfonated Activated Carbons as High-Capacity Sorbents for Atmospheric Water Harvesting	114
Multifunctional Eu-doped carbon dots nanoprobe for highly sensitive and selective determination of glutathione in biological fluid and cell imaging	114
Fabrication of inversion channel diamond MOSFET with atomically step-free Al2O3/diamond interface	114
Holey graphene anchoring of the monodispersed nano-sulfur with covalently-grafted polyaniline for lithium sulfur batteries	114
Solution plasma synthesis of nitrogen-doped carbon dots from glucosamines: Comparative fluorescence modulation for dopamine detection	114
Low-temperature organic solvent-based synthesis of amorphous porous carbon nanoparticles with high specific surface area at ambient atmosphere	114
Broadband terahertz modulation in symmetric gate-controlled graphene photonic crystals	112

Graphene-silicon Schottky devices for operation in aqueous environments: Device performance and sensing application	112
Disulfide bond containing self-healing fullerene derivatized polyurethane as additive for achieving efficient and stable perovskite solar cells	110
ZnFe2O4-infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization	110
Efficient preparation of carbon materials composed of warped graphene layers via in-situ nano-templating and estimation of oxygen reduction reaction activity	110
A close-packed sphere model for characterising porous networks in atomistic simulations and its application in energy storage and conversion	109
A “two cooking with one fish” strategy for modulating both polyaniline cathode and zinc anode towards enhanced kinetics and cycling stability for aqueous zinc ion batteries	109
Confocal Raman spectromicroscopy of graphene	109
Facile and continuous synthesis of graphene nanoflakes in RF thermal plasma	108
In-situ fabrication of multifunctional N-doped hybrid carbon nanotube@carbon fiber by recycling gaseous effluents of carbon fiber production	107
Effectively tuning electromagnetic absorption of carbon-based nanocomposites by phase transition	107
Evaluating the influence of physicochemical characteristics of porous carbons on their cathode performance in aqueous zinc-ion hybrid capacitors	106
N/O co-doped microporous carbon as a high-performance electrode for supercapacitors	105
Soft carbon filled in expanded graphite layer pores for superior fast-charging lithium-ion batteries	105
Donor-acceptor anchoring nanoarchitectonics in polymeric carbon nitride for rapid charge transfer and enhanced visible-light photocatalytic hydrogen evolution reaction	104
Magnetic heterostructure of graphene with a submonolayer magnet on silicon	103
Polymetallic MOF-derived corn-like composites for magnetic-dielectric balance to facilitate broadband electromagnetic wave absorption	102
Mechanistic understanding of Li metal anode processes in a model 3D conductive host based on vertically aligned carbon nanofibers	102
A review of electrospun carbon-based materials for use in lithium-ion capacitors	101
Self-reinforced composites based on polypropylene fiber and graphene nano-platelets/polypropylene film	101
Free-standing carbon nanotube film for high efficiency monopole antenna	101
SWCNT/PEDOT:PSS/DMSO aqueous INKS for screen printing on paper substrates	100
Variable HOF-derived carbon-coated cobalt phosphide for electrocatalytic oxygen evolution	100
Selective CO2 electroreduction to ethanol on encapsulated nickel nanoparticles by N-doped carbon nanotubes	100
Enhancing Fe(II) generation via graphene oxide to activate peroxydisulfate for phenol degradation: Mechanism, molecular descriptors, and environmental application	99
Ultrasensitive detection of miRNA based on single-walled carbon nanotube@MoS2 field-effect transistor regulated by atomic layer deposition	99
Component optimization and microstructure design of carbon nanotube-based microwave absorbing materials: A review	98
Photo-thermal dual responsive shape memory MOF derived carbon/EVA composites with radar wave stealth	98
3D self assembled graphene based cellulose acetate mixed matrix membranes for CO2/CH4 separation: An investigation	98
Ultra low friction and excellent corrosion resistant property of novel composite coating with extreme high liquid content	98
Flexible and multifunctional polyimide-based composite films by self-reducing reaction for electromagnetic interference shielding in extreme environments	98
An efficient cathode electrocatalyst for anion exchange membrane water electrolyzer	97
Carbon nanomaterials for phototherapy of cancer and microbial infections	97
Environment-adaptive, anti-fatigue thermal interface graphene foam	97
Engineering a bandgap-regulable intermediate-band material based on diamond	96
Formation mechanism of carbon dots: From chemical structures to fluorescent behaviors	95
Synthesis and characterization of graphene on copper foil via atmospheric pressure chemical vapor deposition method and its impact on electrical properties	95
Multifunctional recycled carbon fiber-Ti3C2Tx MXene paper with superior electromagnetic interference shielding and photo/electro-thermal conversion performances	95
Ir nanoclusters on ZIF-8-derived nitrogen-doped carbon frameworks to give a highly efficient hydrogen evolution reaction	93
Mott-Schottky heterojunction formation between co and MoSe2 ON CARBON NANOTUBES FOR SUPERIOR HYDROGEN EVOLUTION	93
Catalyst geometry dependent single-walled carbon nanotube formation from polyaromatic hydrocarbon molecule: Pt(111) surface versus Pt nanoparticle	93
Corrigendum to “Functionalized porous conductive carbon layer improves the low-temperature performance of LiFePO4 cathode material for lithium-ion batteries” [Carbon 229 (2024) 119483]	93
Synergistic enhancement of structure and function in carbonaceous SiC aerogels for improved microwave absorption	93
Carbon-based materials for advanced lithium metal batteries based on carbon units of different dimensions	93
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required	93
A one-pot method to prepare a multi-metal sulfide/carbon composite with a high lithium-ion storage capability	93
The use of covalent reactions to improve the biomedical applications of carbon nanomaterials	93
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required	93
Optimizing the growth of aligned carbon nanotubes by literature mining and high-throughput experiments	92
Partial dehydration-mediated selective ion-permeation through subnanometer-scale windows in highly crystalline single walled carbon nanotube walls	92
Multi-layer carbon fiber paper @reduced graphene oxide/Co/C composite with adjustable electromagnetic interference shielding properties	91
Self-supporting nickel-doped V2O5 nanoarrays as bifunctional electrodes for wearable aqueous zinc-ion batteries and pressure sensors	91
Probing the graphene/substrate interaction by electron tunneling decay	91
Editorial Board	91
The influence of heteroatom doping on the performance of carbon-based electrocatalysts for oxygen evolution reactions	90
Editorial Board	90
Editorial Board	90
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required	90
A metal-free catalyst based on g-C3N4 functionalized with cyamelurate-like groups: Catalytic properties and mechanism of a new heterogeneous Fenton-like catalyst	90
Uniform growth of AB-stacked bilayer graphene single crystal by cyclic segregation/dissolution	90
ADVANCES IN GRAPHENE/MOLYBDENUM DICHALCOGENIDE-BASED VAN DER WAALS HETEROSTRUCTURE PHOTODETECTORS	89
The use of an oxidized carbon nanotube film to control Zn deposition and eliminate dendrite formation in a Zn ion battery	89
The low-temperature deposition of a zincophilic carbon layer on the Zn foil for long-life zinc metal batteries	89
Regulating exciton generation and transfer upon nanoarchitectonics with carbon nitrogen polymer for photocatalytic hydrogen peroxide evolution coupled with ethanol selective oxidation	88
Colossal conductivity anisotropy in 3D metallic carbon films	88
Discovery of a universal mechanism for acid-modulated surfactant-based chiral separation of carbon nanotubes	88
Development of carbon nanotube synthesis mechanism based on effects of thermo-physical properties of carrier gases	87
High mass loading pitch-derived porous carbon embedded in carbon nanotube sponge for lithium ion capacitor cathodes	87
Synergism of defect and band engineering in ultra-thin metal free organic C(CN)3 nanosheet for efficient photocatalytic CO2 reduction	87
Insight into the effect of electrolyte ions docked in subnanopores of metal-free carbon cathode on the ORR activity	87
Radially unfolded nanosheets in polyacrylonitrile nanofibers: A biomimetics construct of high-performance anode for lithium-ion batteries	87
Exceptional electromagnetic interference shielding using single-walled carbon nanotube/conductive polymer composites films with ultrathin, lightweight properties	86
Repeated fast selective growth of prepatternable monolayer graphene of electronic quality	86
Multifunctional molecular precursor with tunable nano-microarchitecture enables exceptional electromagnetic waves absorption	86
Birefringent optical responses of single-chirality carbon nanotube membranes	86
A general confinement co-assembly strategy enabling cross-dimensional supraspheres for boosting electrochemical performance	86
Editorial Board	86
A CARBON MATERIAL DOPED WITH BOTH POROUS FeOx AND N AS AN EFFICIENT CATALYST FOR OXYGEN REDUCTION REACTIONS	86
Semi-quantitative analysis of the structural evolution of mesophase pitch-based carbon foams by Raman and FTIR spectroscopies	86
Quantifying the bulk yield of carbyne confined in different carbon nanotube hosts	86
High-performance free-standing LTO/CNT Anodes: Overcoming the dispersion-conductivity trade-off via tailored surface chemistry for advanced full-cell architectures	86

A transient dual-type sensor based on MXene/cellulose nanofibers composite for intelligent sedentary and sitting postures monitoring	85
A review of strategies to produce a fast-charging graphite anode in lithium-ion batteries	85
Enhanced mechanical properties of graphene oxide reinforced aluminum with lamellar microstructure and crystallographic alignment	85
Acceleration strategy for rapid oxidation stabilization of pitch and the influence on the structure and property of carbon materials	85
Hierarchical bath lily-like hollow microspheres constructed by graphene and Fe3O4 nanoparticles with enhanced broadband and highly efficient low-frequency microwave absorption	84
In-situ joule heating-triggered nanopores generation in laser-induced graphene papers for capacitive enhancement	84
Reactivated Fe nanoparticles on carbon nanotube macro film for high-efficiency rechargeable zinc-air batteries	84
Construction of excellent electromagnetic wave absorber from multi-heterostructure materials derived from ZnCo2O4 and ZIF-67 composite	84
Development of long-range conductivity mechanisms in glass-like carbon	84
Simultaneously achieving fast sulfur redox kinetics and high-loading in lithium–sulfur batteries	84
Reversible Raman D-band changes: A new probe into the pressure-induced collapse of carbon nanotubes	84
In-situ grown NiFeLDH nanosheets over nitrogen rich amorphous carbon nanotubes: An electrochemical sensing platform for the detection of depression biomarker	83
Fluorinated graphene as a dual-functional anode to achieve dendrite-free and high-performance lithium metal batteries	83
Boron and nitrogen co-doped porous carbon nanospheres for oxidative dehydrogenation of ethane to ethylene	83
Strengthening copper matrix composites by in situ synthesized amorphous carbon nanosheet reinforcements	83
Optimizing gas transport for C3H6/C3H8 size sieving separation via fine pore engineering of carbon microspheres	83
Validation of inverse gas chromatographic techniques in surface free energy determination: A response to methodological concerns	82
Spatial confinement: Size effect on carbon supports for the H2O2 electrosynthesis of cobalt phthalocyanines	82
Carbon-based sensors	82
Regulating the interfacial reaction of Sc2W3O12/AgCuTi composite filler by introducing a carbon barrier layer	81
Precise edge functionalization and tailoring of graphene via solvent-controlled reactions	81
Boron-doped diamond decorated with metal-organic framework-derived compounds for high-voltage aqueous asymmetric supercapacitors	81
Optical and electronic properties of iodine and bromine doped chirality enriched (12,1) and (13,2) single-walled carbon nanotubes	81
Effects of quenching rate on the plasma gas-phase synthesis of graphene: Insight from the experiments and ReaxFF studies	81
3D self-assembled crumpled porous carbon microcapsules as a versatile platform for self-sustainable multi-modal wearable electronics	80
An experimental investigation of diesel soot thermal-induced oxidation based on the chemical structure evolution	80
Hollow engineering of carbon-based microspheres: Microstructural modulation for advanced electromagnetic wave absorption	80
Porous C/Co (derived from ZIF-67) embedded in anazotic g-C3N4 (PC/Co/ACN) composite as a super electromagnetic wave absorber	80
Suitable thickness of carbon coating layers for silicon anode	80
Nanocarbon oxidation in the environmental transmission electron microscope - Disentangling the role of the electron beam	80
Rational design of hierarchical yolk-double shell Fe@NCNs/MnO2 via thermal-induced phase separation toward wideband microwave absorption	80
Interaction of industrial graphene and carbon nanotubes with human primary macrophages: Assessment of nanotoxicity and immune responses	79
Multifunctional porous carbon fibers-based porous stacking for electromagnetic interference shielding	79
Tunable amorphous carbon films formed on ultralow wear, Pt–Au alloys	79
Bacteria derived nanomaterials for lithium-based batteries	79
Exploring thermal expansion of carbon-based nanosheets by machine-learning interatomic potentials	79
Investigation of dynamic impact responses of layered polymer-graphene nanocomposite films using coarse-grained molecular dynamics simulations	79
A hierarchical porous carbon aerogel embedded with small-sized TiO2 nanoparticles for high-performance Li–S batteries	78
Leaf-Vein structure like g-C3N4/P-MWNTs donor-accepter hybrid catalyst for efficient CO2 photoreduction	78
Tunable nano-wrinked channels of reduced graphene oxide membranes for molecular sieving gas separation	78
Lightweight 3D interconnected porous carbon with robust cavity skeleton derived from petroleum pitch for effective multi-band electromagnetic wave absorption	78
Carbon nanotube polymer nanocomposites coated aggregate enabled highly conductive concrete for structural health monitoring	78
Preparation of magnetic three-dimensional porous Co-rGO aerogel for enhanced microwave absorption	77
Coal-based graphene oxide-like materials: A comprehensive review	77
Enhancing ions/electrons dual transport in rGO/PEDOT:PSS fiber for high-performance supercapacitor	77
Kapok fiber-derived hollow carbon structure decorated with hydrangea-like MoS2 as sustainable and efficient electromagnetic wave absorbing composite fibers	77
Cu-CNTs current collector fabricated by deformation-driven metallurgy for anode-free Li metal batteries	77
Mesoscopic structure with high aspect ratio in PAN-based carbon fibers	76
Design of graphene oxide/few layers graphene 2D heterostructured membranes (GO/FLG-m) for water purification	76
Low-temperature characteristics of resistive switching memory devices based on reduced graphene oxide-phosphor composites toward reliable cryogenic electronic devices	75
Tri-doped mesoporous carbon nanostructures prepared via template method for enhanced oxygen reduction reaction	75
Carbon encapsulated FeS nanosheet-nanoribbon interwoven sandwich structure as efficient sodium-ion battery anodes	74
Mechanistic insights into oxygen–boron co-doping in activated carbon: Tailoring surface chemistry and wettability	74
All-optical nanoscale thermometry based on silicon-vacancy centers in detonation nanodiamonds	74
Ultrasensitive acoustic graphene plasmons in a graphene-transition metal dichalcogenide heterostructure: Strong plasmon–phonon coupling and wavelength sensitivity enhanced by a metal screen	74
Reaction mechanisms for Ti coatings on diamond	74
Laser direct writing O/N/S Co-doped hierarchically porous graphene on carboxymethyl chitosan/lignin-reinforced wood for boosted microsupercapacitor	73
Constructing the pyrolysis kinetic model of mesophase pitch for improving mechanical properties and thermal conductivity of carbon fibers	73
Achieving robust low friction of diamond-like carbon films in humid air: Exploring the dual effects of doped FeCrNi medium-entropy alloy	73
A novel method for synthesis of γ-graphyne and their charge transfer properties	73
Fabrication of corrosion-resistant and heat-resistant multi-walled carbon nanotubes/poly ether ether ketone/thermoplastic polyimide electromagnetic shielding foams based on double percolation structur	73
A perspective on the electromagnetic interference shielding behavior of nickel-coated filamentary carbons	72
Biomass derived nanoarchitectonics of porous carbon with tunable oxygen functionalities and hierarchical structures and their superior performance in CO2 adsorption and energy storage	72
Critical assessment of carbon pastes for carbon electrode-based perovskite solar cells	72
High-energy short-wave blue light conversion films via carbon quantum dots for preventing retinal photochemical damage	72
A review of the use of electrospinning in the preparation of flexible lithium-ion batteries	72
Heterostructure design of 3D hydrangea-like Fe3O4/Fe7S8@C core-shell composite as a high-efficiency microwave absorber	72
Mucus-inspired hairy carbon dots for friction-dependent fluorescence in tribological interface studies	72
Heterostructured rGO/MoS2 nanocomposites toward enhancing lubrication function of industrial gear oils	71
Unravelling the sensory capability of MWCNT-reinforced nanocomposites: Experimental and numerical investigations	71
Design and synthesis of non-homogeneous CoS2/carbon composite nanofibers for enhanced microwave absorption	71
“Appropriate dressing” non-fluorination strategy: Dopamine coating CuSiF6 framework derived F-rich SiC/CuF2@C electromagnetic wave absorber	71
Multi-scale structural design of multilayer magnetic composite materials for ultra-wideband microwave absorption	71
Interfacial energy barrier tuning in MnO2/MoS2/Carbon fabric integrated with low resistance textrode for highly efficient wearable thermoelectric generator	71
Friction condition switching two-type transfer layers of hydrogenated amorphous carbon with distinct tribological behaviors	70
Understanding the growth of carbon dots derived from bioresources via plasma-electrified synthesis	70
Organic-inorganic PVA/Carbon microwave absorption composites: Tuning rheology to enable structurally diverse fabrication	70
Pre-twisted carbon fibers reinforced polymer composites and the unique clockwise and counterclockwise torsion behaviors	70
N and S dual doping and defect engineering to modulate electronic structure of 3D honeycomb-like carbon for boosting microwave absorption	70
Advanced characterization of soot precursors via excitation emission matrices fluorescence spectroscopy and molecular modeling	70
Carbon cloth supported flower-like porous nickel-based electrodes boosting ion/charge transfer characteristics of flexible supercapacitors	70
Metal organic frameworks derived NixSey@NC hollow microspheres with modifiable composition and broadband microwave attenuation	69
Catalytic superlubricity via in-situ formation of graphene during sliding friction on Au@a-C:H films	69
Embedding thermostable rGO/SiC O composite phase in SiC fibers for improved high temperature resistance	69
P-doped cellulose nanofiber derived carbon aerogel with efficient thermal insulation and electromagnetic wave absorption performances	69
Ultraslim and highly flexible supercapacitor based on chemical vapor deposited nitrogen-doped bernal graphene for wearable electronics	69
Shear-induced assembly of high-aspect-ratio graphene nanoribbon nanosheets in a confined microchannel: Membrane fabrication for ultrafast organic solvent nanofiltration	69
Enhancement of interfacial thermal conductance by introducing carbon vacancy at the Cu/diamond interface	68
One-step pyrolyzed Co6Mo6C2/Mo2C/Co/C foam integrating multiple Schottky heterojunctions for simultaneous thermal insulation and electromagnetic wave absorption	68
Electrochemical sensing of phenacetin on electrochemically reduced graphene oxide modified glassy carbon electrode	68
Multi-functional electromagnetic wave absorption hydrogel with adjustable absorption frequency	68
Editorial Board	68
A review of the catalytic preparation of mesophase pitch	68
In situ self-catalyzed formation of carbon nanotube wrapped and amorphous nanocarbon shell coated LiFePO4 microclew for high-power lithium ion batteries	68
Direct synthesis of nanocrystalline single-layer porous graphene for hydrogen sieving	68