OOIR: Observatory of International Research

Papers

(The median citation count of Chemie Ingenieur Technik is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-12-01 to 2025-12-01.)

Article	Citations
Überblick Inhalt: Chem. Eng. Technol. 4/2022	87
ACHEMA: Impulsgeberin der Prozessindustrie	33
Titelbild Chem. Ing. Tech. 8/2023	29
Titelbild Chem. Ing. Tech. 3/2023	29
	26
Nachruf für Prof. em. Dr.‐Ing. Johann Gaube	23
Magnetically enhanced fluidized‐bed electrodes – A promising reactor concept for bioelectrochemical syntheses	22
Flexibilization of Two‐Phase Digestion under Dynamic Process Conditions through Monitoring of Dissolved Hydrogen	21
Advantages of Taylor‐Couette Flow for Multiphase Operations in the Taylor‐Couette Disc Contactor	20
Conceptual Design of a Counter‐Current Crystallization Process	20
Application of machine learning techniques to model CO₂ capture in spray columns	19
Techno‐economic benchmarking of electrochemically induced succinic acid crystallization	18
Überblick Inhalt: Chem. Eng. Technol. 9/2022	18
Using Numerical Dissipation Rate and Viscosity to Assess Turbulence‐Related Data Accuracy – Part 2: Results	18
Überblick Inhalt: Chem. Eng. Technol. 5/2022	16
Inhalt: Chem. Ing. Tech. 10/2023	16
Advertorial Chemie Ingenieur Technik 11/2023	16
Inhalt: Chem. Ing. Tech. 3/2024	15
Economic and Ecological Evaluation of Demand Side Management in Biogas Production – A Dynamic Simulation Approach*	15
Computer‐Aided Molecular and Process Design	15
Fluiddynamik von Kolonneneinbauten unter Berücksichtigung von Fouling	14
Raman Measurements in the Hydroformylation of Decene with Laser Powers of 1 mW in Ex Zones	14
Concept of Catalytic Depolymerization of Polyolefinic Plastic Waste to High Value Chemicals	14
Schnell und benutzerfreundlich	14
Filtrationsmembranen und spezifische Adsorber auf der Basis von maßgeschneiderten selbst‐organiserenden Blockcopolymeren	14

Self‐Diffusion of a Chemical Warfare Agent Simulant and Water in Nafion by Pulsed Field Gradient NMR	13
Experimental Heat Transfer Coefficients for Zeotropic Mixture Condensation of Hexamethyldisiloxane/Octamethyltrisiloxane and Ethanol/Hexamethyldisiloxane	13
Core‐Shell Catalyst Pellets for CO₂ Methanation in a Pilot‐Scale Fixed‐Bed Reactor	13
Modified Oxymethylene Ethers Based on Technical Alcohol Mixtures and their Fuel Properties	13
NaWuReT Colloquium: Career Pathways and Opportunities for Reaction Engineers in Industry	13
Trends and Challenges in Electrifying Technical Organic Synthesis	13
Depolymerization of PET Fibers from Textile Blends and Recovery of Terephthalic Acid	13
Comparative Analysis of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator	13
Inhalt: Chem. Ing. Tech. 11–12/2025	12
CO₂ Adsorption and Desorption for CO₂ Enrichment at Low‐Concentrations Using Zeolite 13X	12
Recent Developments in Methanol Technology by Air Liquide for CO₂ Reduction and CO₂ Usage	12
Supercapacitors vs. Lithium‐ion Batteries: Properties and Applications	12
Comparative Life Cycle Assessment of Pyrolysis – Recycling Germany's Sorted Mixed Plastic Waste	12
Vorschau: Chem. Ing. Tech. 5/2022	12
CFD‐based compartment modeling approach for continuous polymer reactors by means of the mean‐age theory	11
Simultaneous Design of Renewable Fuels and their Production Processes	11
Experimental Investigations of Foam via a Shadowgraphic Inline Probe	11
Bacteriophage‐derived expression enhancing tag yields powerful platform process for recombinant fusion proteins	11
Status on Thermal Energy Storage with Molten Nitrate Salt above 600 °C	11
Characterizing particulate systems towards the analysis of hydrodynamic stress in stirred‐tank (bio)reactors	11
Accelerating process development for protein crystallization with advanced analytics	11
Wasserstoff	10
Enhanced Semi‐Preparative Biotransformation of Cumene Dioxygenase: From Analytical Scale to Product Isolation	10
Vorschau: Chem. Ing. Tech. 7/2022	10
An Image‐Based Approach to Automated Recognition of Asbestos‐Containing Components in Wall Demolition Waste	10
Einfluss der Partikelgröße auf den Durchgangswiderstand von partikulären Systemen	10
Cu‐Co/ZnAl₂O₄ Catalysts for CO Conversion to Higher Alcohols Synthesized from Co‐Precipitated Hydrotalcite Precursors	10
Keramische Membranen für die effiziente Abtrennung von organischen Mikroschadstoffen aus wässrigen Lösungen am Beispiel pharmazeutischer Wirkstoffe	10
Optimal Design and Scheduling of a Power‐to‐Methanol Process with Battery and Intermediate Hydrogen Storage	10
The Different Types of Noise and How They Effect Data Analysis	9
Moving Horizon Parameter Estimation for an Enzyme‐Catalyzed Transamination Reaction with Integrated Product Removal	9
Untersuchungen zur Aufbereitung von Gießerei‐Altsand‐Regenerierstäuben mittels Abweiseradsichter	9
Plastic Waste Utilization via Chemical Recycling: Approaches, Limitations, and the Challenges Ahead	9
Inhalt: Chem. Ing. Tech. 7/2024	9
Enzyme‐Assisted Extraction of Alginate from Beach Wrack Fucus vesiculosus	9
Concentration Fluctuations in Steel Mill Gases: Analytics as Key to Develop Steel Off‐Gas Purification	9
Analytical Methods for the Rapid Determination of Solid Biofuel Quality	9
Probing Surface Chemistry Effects on Effective Diffusion Coefficients in Hierarchically Porous Media Through Multiscale Simulations	9
	9
µCT‐Based Topography Analysis of Inaccessible Surfaces Exemplified by a Biofouling‐Covered Plastic	9
CO₂ Conversion by Fischer‐Tropsch Synthesis Using Na‐Modified Fe Catalysts	9
Wassermanagement als Schlüsselparameter für die Skalierung eines CO₂‐Elektrolyseurs	9
High‐Temperature Heat Pumps for Industrial Use	8
Development of a photosynthetically driven biocatalyst for the conversion of cyclohexane to ε‐caprolactone	8
N‐Doped Activated Carbons from Polypyrrole – Effect of Steam Activation Conditions	8
„Digitalisierung der Reaktionstechnik“: ein Themenfeld mit vielen Facetten!	8
AI in Process Industries – Incubator Labs and Use Cases	8
Überblick Inhalt: Chem. Eng. Technol. 4/2023	8
Tailoring the Reactor Properties in the Small‐Scale Sorption‐Enhanced Methanol Synthesis	8
Advertorial Chemie Ingenieur Technik 1–2/2023	8

Oxyfuel combustion experiments to reduce CO₂ emissions in the cement production process	8
Covestro Monitoring Platform – Monitoring of Sensor, Asset, and Unit Health at Scale	8
Controlling Aspergillus niger morphology in a rocking motion bioreactor: An alternative investigation platform for fungi	8
Experimental Method Development for the Formation of Filter Cakes with Inhomogeneous Cake Geometry	8
Inhalt: Chem. Ing. Tech. 6/2023	8
Inhalt: Chem. Ing. Tech. 7/2022	8
Bridging the Analytical Gap Between Gas Treatment and Reactor Plants in Carbon2Chem®	7
Numerical Calculation of the Irreversible Entropy Production in Heat Transferring Structures	7
Plasma Chemical Oxygen Conversion in an Industry‐Oriented Reactor Design	7
Inhalt: Chem. Ing. Tech. 11/2024	7
Concentrating solar power at higher limits: Studies on molten nitrate salts at 620 °C in a laboratory pilot‐scale hot tank	7
Biologische Methanisierung als innovative Energiespeichertechnologie für den Einsatz auf Biogasanlagen	7
Zirkularität – Die Herausforderung des Chemieingenieurwesens	7
Inhalt: Chem. Ing. Tech. 1–2/2024	7
How to Measure the Greenness of Chemicals? A Case Study on Butadiene Production Applying Green Metrics and Life Cycle Assessment	7
	6
Inhalt: Chem. Ing. Tech. 5/2023	6
Analyzing bioprocess heterogeneity from the microbial viewpoint: Recent developments	6
Digital twin under regulatory demanded quality‐by‐design approach of chromatography for future pharmaceutical systems	6
Statistical optimisation of β‐glucosidase production by Chitinophaga ginsengisegetis	6
Potenzial von Membranen zur verbesserten Reaktionsführung von Selektivoxidationen: Katalysator‐, Reaktor‐ und Prozessebene	6
Inhalt: Chem. Ing. Tech. 9/2024	6
From Bodenstein to Péclet – Dimensionless Numbers for Axial Dispersion in Chemical Reactors	6
Optimization of the Coating Process of a Ca(OH)₂‐Based Thermochemical Energy Storage Material	6
Adhesion Forces at High Temperatures – An Atomic Force Microscopy Study Using Two Particle Systems	6
Validation of a single temperature module to describe the entire cooling crystallization process on a filter belt crystallizer	6
Untersuchung der Sortierbarkeit kohlenstofffaserverstärkter Kunststoffe mittels induktiver Sensorik	6
Towards a better recycling of lithium‐ion batteries – Removal and recovery of electrolyte solvents from shredded cells	6
A generalized framework for modeling the gas‐phase in aerated stirred tanks using the Lattice‐Boltzmann method	6
Transport und Nutzung von flüssigem Wasserstoff: Leitprojekt TransHyDE – Projekt AppLHy!¹⁾	6
Bio ohne Technik/Technik ohne Bio? – mit interdisziplinärer biotechnologischer Forschung dem Klimawandel begegnen	6
Inhalt: Chem. Ing. Tech. 6/2022	6
Inhalt: Chem. Ing. Tech. 5/2024	6
Identification of Pressure‐Swing Separation Processes for Azeotropic Mixtures Using Deep Reinforcement Learning	6
Development of a Dynamic Gray‐Box Model of a Fermentation Process for Spore Production	6
Überblick Inhalt: Chem. Eng. Technol. 3/2025	6
Titelbild Chem. Ing. Tech. 12/2022	6
Electrochemical H₂O₂ Generation for Sustainable Water Treatment	6
ARCUS Process Demonstration Unit – Introduction of the First Commercial Plant for Chemical Recycling of Plastic Waste in Germany	6
Inhalt: Chem. Ing. Tech. 10/2022	6
	6
	6
Challenges in the Recycling of Battery Casing Materials	6
Closing the Carbon Cycle in Plasma‐Based CO₂ Splitting – A Techno‐Economic Perspective	6
Recycling of Critical Metals from Light‐Emitting Diodes	5
Titelbild Chem. Ing. Tech. 11/2023	5
Retracted: Can the chemical industry solve the climate change? On the role of human energy production, renewable energies, and the potential of chemistry as a solution provider	5
Regulation of xylanase activity in wholegrain rye flour	5
Adsorption of mercury on activated carbon	5
Understanding Promotional Effects of Trace Oxygen in CO₂ Methanation over Ni/ZrO₂ Catalysts	5
One‐Dimensional View of the Structural Changes in the Filtering Layer during Continuous Dust Deposition – A New Approach to a Holistic View of the Filtration Process	5
Kinetic Parameters of the Cross‐linking Reaction of Cellulose Membranes with Bifunctional Epoxides	5
Von reaktiven Siliziumverbindungen bis zu abbaubaren Kunststoffen: GDCh zeichnet wegweisende Chemieforschung aus	5
Gender Differences in Teamwork and Leadership within Virtual Engineering Laboratories	5
Using Artificial Neural Networks to Predict Physical Properties of Membrane Polymers	5
Einfluss der Partikelgröße auf die Staubungsneigung von partikulären Recyclingbaustoffen	5
Development of a Digital Twin for Biomass Prediction of Lentilactobacillus rhamnosus	5
Impact of Salt Selection on Ion‐Exchange Chromatography of Model Proteins	5
Power characteristics of unconventional 3D‐printed impellers	5
Challenges and state of the art of glycerol conversion to acrylonitrile	5
Control of an Extraction Column Using Reinforcement Learning	5
Mechanocatalytic partial depolymerization of lignocellulosic feedstock towards oligomeric glycans	5
Quantification and Tuning of Surface Oxygen Vacancies for the Hydrogenation of CO₂ on Indium Oxide Catalysts	5
On‐Chip Chemical Synthesis Using One‐Step 3D Printed Polyperfluoropolyether	5
Forschung und Anwendung: Dialog ist der Schlüssel	5
Applicability and Validity of CFD‐based Compartment Models for One to Multiple Operating Points	5
Catalysis – Far from Being a Mature Technology	5
Inhalt: Chem. Ing. Tech. 4/2022	5
GDCh: Chem. Ing. Tech. 4/2024	5
Automated process synthesis as an approach for structured process development	5
Towards Sustainable Battery Recycling: Selective Desorption of Nickel(II) and Cobalt(II) from Amino‐Polycarboxylate Derivate Ligands in Model Systems	5
Power‐to‐Methane – Design and Optimization of Two New Bubble Column Reactors	5
Influence of High Hydrostatic Pressure and Pulsed Electric Field Treatment on Moisture Absorption of Wheat Grains	5
New Ways of Collaboration for Current and Future Challenges	5
Modeling the Condensation Heat Transfer on Horizontal Low‐Finned Tubes	5
Coalescence of Inner Water Droplets in Double Emulsions Due to Surfactant Transport through Oil	5
New Test Setup for On‐Site Testing of Gas Cleaning Catalysts	5
ProMetaS – A Metadata Schema for Process Engineering and Industry	5
Tailored central metabolism for stoichiometrically enforced high‐yield bioproduction of chemicals from agricultural waste (ForceYield)	4
Development of a novel disposable flow cell for spectroscopic bioprocess monitoring	4

Sustainable production of a natural colorant by exploiting the fermentation of the basidiomycota Laetiporus sulphureus	4
ZeTA – Electrochemical separation technology and electrolysis cell design for the pH‐shift crystallization	4
Überblick Inhalt: Chem. Eng. Technol. 11/2022	4
Co‐cultivation of immobilized plant growth promoting bacteria for robust microalgal production processes	4
	4
Hydrogen Conditioning Using Nanoporous Inorganic Membranes	4
SisClever: Pure and Concentrated Products From Multicomponent Mixtures – Applied to Urban Mining	4
Increasing the Sustainability of Pharmaceutical Grade Water Production	4
Hochdruck‐geeignete AM‐Konstruktionselemente mit hierarchisch‐funktionalen Metallstrukturen	4
Hydrogen Interactions with Defects in Materials	4
Der verborgene Charme transformativer Vereinbarungen	4
New challenges for chemical engineering – Flexibility and electrification as a key to efficient processes of the future	4
Options for action by the steel and thermoprocessing industries for defossilization	4
Model‐based product temperature and endpoint determination in primary drying of lyophilization processes	4
Forum Chemie Ingenieur Technik 6/2022	4
Jürgen Caro zum 70.	4
Utilization of Waste Materials Using the Müller–Kühne Process—A Life Cycle Inventory Study	4
Use of a Scattered Light Sensor for Monitoring the Dispersed Surface in Crystallization	4
Engineering TM1459 for Stabilisation against Inactivation by Amino Acid Oxidation	4
Physics‐guided machine learning to predict activity coefficients from SMILES	4
Artificial Intelligence‐Assisted Experimental Optimization of Water Oxidation Catalysts	4
A Numerical Study on the Influence of Confining Walls on Drag and Heat Transfer Coefficients in Single‐Particle Lab‐Scale Reactors	4
How to Decarbonize Our Energy Systems: Process‐Informed Design of New Materials for Carbon Capture	4
	4
GDCh: Chem. Ing. Tech. 9/2022	4
Polyhydroxyalkanoates from oleaginous waste streams: Production and control strategies	4
Forum Chemie Ingenieur Technik 10/2022	4
Spectroscopic on‐line sensing for monitoring and control of microalgal cultivations	4
Selective Oxidation of Methanol to Green Oxygenates – Feasibility Study of Fixed‐Bed and Membrane Reactors	4
Insights into reactors through CFD simulations	4
BioCampus MultiPilot: A One‐Stop Shop for Industrial Biotechnology Demonstration	4
Experimental Parameter Study of the Factors Influencing Dry Dispersion Using Laser Diffraction	4
Alterungsstudie an VWT‐Katalysatoren für stationäre Biogas‐Motoren mithilfe der CFD	4
Multimodaler Wasserstoff‐Hub in der Innovationsregion Fessenheim	4
Particle Residence Time Determination with More Than 400 Tracer Particles in a Circulating Fluidized‐Bed Full‐Loop System	4
Object Identification Technologies as Key Enabler for Circular Business Models‡	4
GDCh: Chem. Ing. Tech. 12/2022	4
Ecologic and Economic Evaluation of Combined Green Methanol Synthesis from CO₂ and Biotechnological Upgrading to Value Products, Part 2: Economic Impact	3
Autonomous Processes in Particle Technology	3
Titelbild Chem. Ing. Tech. 1‐2/2025	3
Regenerativ erzeugter Wasserstoff – Perspektiven in chemischen Wertschöpfungsketten	3
5th Indo‐German Workshop “Advances in Materials, Reactions and Separation Processes”	3
Definition, Characterization, and Modeling of Hybrid Modular‐Monolithic Process Plants	3
Überblick Inhalt: Chem. Eng. Technol. 8/2022	3
Protein Shift – How Membrane Technology Can Contribute	3
Conceptual Approach for Lab‐Scale Vacuum DTB Crystallizer with Online Monitoring and Flexible Process Functionalities for Rapid Process Adjustment	3
Aggregate Removal by Responsive Electrospun Membrane based Hydrophobic Interaction Chromatography	3
Inhalt: Chem. Ing. Tech. 5/2022	3
Improving Hydrolysis and Methane Production from Sugar Beet Pulp through Biomagnetism	3
(Co‐)Oligomerization of Olefins to Hydrocarbon Fuels: Influence of Feed Composition and Pressure	3
	3
Bernoulli offers a solid basis for crystallization	3
Recipe optimization of batch distillation trajectories based on a data‐driven model	3
Synthesis of Sustainable Fuels and Intermediates from Ethanol and Methanol	3
Energy‐efficient municipal wastewater treatment – Can deammonification be competent under mainstream conditions?	3
Überblick Inhalt: Chem. Eng. Technol. 9/2023	3
CO_xFixation to Elementary Building Blocks: Anaerobic Syngas Fermentation vs. Chemical Catalysis	3
Single‐Use Technology in Biopharmaceutical Manufacture and Beyond	3
Experiments on the Dynamic Behavior of the Chemical Looping Combustion Process	3
Statistik der Chemiestudiengänge 2023: Zahl der Studienanfängerinnen und ‐anfänger leicht gestiegen	3
Flexible PLA Copolymers with Low Melt Flow Index for Blown Film Applications	3
Überblick Inhalt: Chem. Eng. Technol. 5/2025	3
Optimization of Ironmaking Blast Furnace Operations Using an Integrated Mathematical Model	3
Inhalt: Chem. Ing. Tech. 12/2024	3
Seasonal Variations in the Composition of Sewage Sludge in the Observation of a Sewage Treatment Plant	3
Vapor recompression and heat pump technology: An option for electrification of chemical processes	3
Life Cycle Assessment for Early‐Stage Bioprocess Development: Current State and Future Perspective	3
Investigation of Aging Mechanism of Pt‐ZSM‐5 Catalysts for Non‐Oxidative Propane Dehydrogenation	3
Integration of adaptive syntheses in the sustainable production of biofuels and chiral fine chemicals	3
Novel Technique for Monitoring Thermal Unfolding of Enzymes in Crude Mixtures	3
Digital Twins for scFv Production in Escherichia coli	3
Dynamic modeling to support the development of advanced alkaline electrolysis cells	3
CO Generation from CO₂ Using an Atmospheric Microwave Plasma Process	3
Untersuchung der Flüssigkeitsverteilung in additiv gefertigten strukturierten Laborpackungen	3
Effects of Pretreatment on the Biocatalysis of Renewable Resources	3
Evaporation of Binary Mixtures in a Pillow Plate Thermosiphon Reboiler	3
Enzymatic (2R,4R)‐Pentanediol Synthesis – “Putting a Bottle on the Table”	3
Überblick Inhalt: Chem. Eng. Technol. 12/2024	3
Titelbild Chem. Ing. Tech. 6/2025	3
Titelbild Chem. Ing. Tech. 4/2024	3
Direct Synthesis of Anion‐Exchanged FeNi‐Layered Double Hydroxides as OER Electrocatalysts	3
Experimental Investigations of Heat Pipe Systems for Use in Electrical Engines	3
Ein exzellenter Wissenschaftler und Botschafter für sein Fach	3
Hybrid physics‐neural network soft sensors for the dynamic operation of liquid‐liquid separators	3
Alkalische Aktivierung und Reaktivierung von Sekundärrohstoffen der Bau‐ und Abbruchindustrie	3
Case Study: Flipped Classroom with Gamification in a Hybrid Fluid Mechanics Course	3
Aspects of gas storage: Effect of confinement on supercritical isotherms	3
Development of an Ontology for Biocatalysis	3
Reusable surrogate models for flow sheet simulation	3
Utilization of Lolium perenne varieties as a renewable substrate for single‐cell proteins, lactate, and composite materials	3
Experimental investigation of the temperature influence on the drag force of single droplets	3
Utilization of flame arresters in pharmaceutical processing	3
On the Usability of Pt/Al₂O₃ Catalysts for Exhaust Gas After Treatment in Ammonia Combustion Engines	3
Optimizing the Pt‐FeO_x Interaction over Atomic Pt/FeO_x/CeO₂ Catalysts for Improved CO Oxidation Activity	3
CIRCULAR FOAM – Combined experimental and model‐based process design for the recycling of rigid PU foam	3