Chemistry and Technology of Fuels and Oils

Papers
(The TQCC of Chemistry and Technology of Fuels and Oils is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Comprehensive Reservoir Comparison Technique for Complex Reservoirs21
Production Technology of a Spherical Support for a Continuous Reforming Catalyst18
Formation of С10–С14 Adamantanes from Petroleum Protoadamantanes16
Experimental Study of the Effect of HCO3– and Cl– Ions on Natural Gas Hydrate Formation in a Porous Medium15
Research on the Measurement of Ship’s Tank Capacity Based on the Monte Carlo Method15
Development of a Method for Predicting the Quality of Petroleum Coke13
Genesis of Deep Abiogenic Hydrocarbon Systems11
Research on Geochemical Response Characteristics of Dry Hot Rocks Injected with Scale Removal pH Modified Fluid11
Typical Deterioration Process of Jet Fuel Quality During Maritime Storage and Transportation10
Ignition Features of a High-Voltage Electric Discharge in Water Under Conditions of Deep Oil Wells10
Study on Influencing Factors of Nitrogen-Assisted Solution Mining for Salt Cavern Gas Storage Based on the Analytic Hierarchy Process10
Numerical Simulation Investigation of Lateral Bearing Characteristics of Deepwater Expandable Conductors10
Experimental Study on CO2 Injection to Enhance Recovery and its Storage Characteristics in Low Permeability Gas Reservoirs10
Evaluation of Progress Priorities in Petroleum Refining Engineering Project Groups Based on Combined Weighting Method8
Quantitative Effects of Different Factors on the Thermal Characteristics of New Submarine Hot Oil Pipeline During the Preheating Process8
Study on the Formation Mechanism of Fracture Network in Hydraulic Fracturing of Shale Reservoirs7
Nucleation of Methane Hydrate in the Presence of Nanofibrillar Cellulose7
Exploration and Practice of Geological Drilling Technology in the Field Of Oil and Gas7
Study on Water Intrusion Flow Model of the Tight Gas Reservoir7
A Perforation Density Optimization Method for Limited-Entry Fracturing Considering Injection-Production Fluid Balance7
Development and Performance Evaluation of a Salt-Tolerant Supramolecular Fracturing Fluid Thickening Agent7
Functional Additives to Oil and Oil Refining Products Based on Depressants Developed by Rosneft Research and Development Center6
Identification and Capacity Analysis of Ultra-Deep Carbonate Gas Reservoirs6
Molecular Simulation of Hydration Characteristics of Montmorillonite under Potassium Salt Inhibitor6
Zeta Potential of Cellulose Nanofibrils as a Function of pH6
Study on the Influencing Factors and Control Mechanisms of Rock Fracture Propagation Direction in Hydraulic Fracturing6
Characteristics and Quantitative Distribution of Zeolite in Glutenite Reservoirs6
Enhanced Oil Recovery Through Control Technology Pressure Management and Water Control6
Bio-Oil: Production, Modification, and Application5
Effect of Surfactants on the Crystallization and Solidification Temperatures of Paraffin in Various Types of Solvents5
Construction of Complex Well Control Scenarios and Analysis of Risk Evolution Law5
Upgrading Cat-Cracked Gasoline Fractions to Increase the Production of High Octane Number Motor Gasoline5
Numerical Investigation of Cement Sheath Interface Integrity During Hydraulic Fracturing of Coalbed Methane Well5
Study on the Preparation and System of Desulfonated Anti-High Temperature Fluid Loss Agent5
Urban Gas Load Forecasting Based on Time Series Methods5
Detection of Bubble Flow by Cluster Analysis of Ultrasound Waves’ Spectral Properties5
Development of a Digital Twin of the Extruder for Production of Filament from Low Density Polyethylene5
Thermal Insulation Performance Evaluation and Installation Length Optimization of Inner Coating Thermal Insulation Drillpipe5
Evaluation and Recommendations for Clean Wellbore Fluid Systems in Ultra-Deepwater Carbonate Reservoirs4
Analysis of Reservoir Physical Properties and Emulsification Law of Crude Oil4
Study on Plugging Mechanism of Gel Plugging Agent in Fractured Carbonate Oil Reservoirs4
Research on Risk Analysis Method of Jack-Up Drilling Platform Pile Leg Puncture4
Study on Factors of the Fracture Width in Tight Sandstone4
Development and Application of a Oligomeric Emulsifier with High-Temperature Resistant4
Biodiesel Production in the Presence of Eggshell Nano-Catalyst4
Mechanism of Improving Oilfield Recovery by High-Volume Water Injection without Proppant4
Analysis of Reservoir Damage Mechanism and Prevention Measures for Deep Carbonate Gas Reservoir with High Sulfur Content4
Characterization of Pore Structure and Thermal Evolution of Shale4
Irregular Seismic Data Reconstruction Based on Compressive Sensing4
Oil Displacement Mechanism of a Novel Surfactant4
Silicoaluminophosphate Molecular Sieves with Different Silica Contents and Their Catalytic Properties in the Oligomerization of α-Methylstyrene4
Research of a Self-Adaptive High-Performance Re-Fracturing Technology with Knot Temporary Plugging in a Thin Reservoir with High Stress4
Discontinuity Stability Analysis for Carbon Dioxide Enhanced Oil Recovery4
Some Mechanisms of Change in Properties of Diesel Fuels at Low Temperatures4
Analysis and Evaluation of the Benefit of Single-Well Production Increase Measures in the Late Development4
Laser Raman Spectroscopy – An Effective Method for Total Process Control of Poly-α-Olefin Oil Production4
Research on Real-Time Monitoring and Remediation System of Petroleum Contaminated Soil Based on Intelligent Sensing and Microbial Remediation4
Adsorption Properties of a Modified Adsorbent in Petroleum Analysis by Geochemical and Chemometric Methods4
Variable Density Intermediate Stratum Gravity Correction Method for Heterogeneous and Complex Surface4
Kinetic Study of the Synthesis of a Fullerene Derivative Containing a Diterpene Fragment4
Study on Performance Evaluation of Profile Control System with High Temperature Resistant Weak Gel Prepared from the Produced Fluid3
Research on Acidisation and Production Increase Technology of Low-Producing Wells in Yinger Depression3
Main Controlling Factors of Dolomite Reservoirs for Deep Carbonate Oil and Gas Exploration3
Investigation of the Hydrocracking Stage in the Integrated Pyrolysis-Coking-Hydrocracking Process of Biomass for Aviation Fuel Component Production3
Studying the Accumulation Characteristics of Crude Oil in an Oil Formation in the Aspect of Predicting the Effectiveness of Crude Oil Exploration3
Effect of the Conditions of the Preparation of the Impregnating Solution and Heat Treatment on the Activity of Hydrotreating Catalysts3
Experimental Study on Porosity & Permeability Characteristics of Typical Tight Oil Reservoirs3
Determination of the Composition of a Frost-Resistant Semi-Liquid Lubricant for Extreme Cold Areas3
Use of Electron Phenomenological Spectroscopy for the Rapid Determination of the Properties of Raw Material for the Preparation of Multifunctional Carbon Materials3
Updating Vacuum Creating Systems3
Deep Processing of Heavy Resids Based on TAIF-NK JSC Heavy Residue Conversion Complex3
Flow Mechanism and Transient Pressure Analysis of Multi-Stage Fractured Horizontal Well3
A New Approach to Calculating Minimum Reflux Condition During Multicomponent Mixture Fractionation3
Numerical Simulation of Oil Displacement in Complex Fault Block Reservoir3
Numerical Simulations of Liquid Leakage and Gas Channeling for Plunger Lift3
Heat Capacity of Oil Systems at High Pressures3
Influence of Perforation on Fracture Initiation in Horizontal Wells and Parameter Optimization3
Selection of Absorbent and Technological Parameters for Purification of Natural Gas with Equal Ratio of Acidic Components3
New Composites Based on Closed-Cell Polyurethane Foam and Natural Nanomaterials3
Quantitative Study of Diagenesis and Dissolution Porosity in Conglomerate Reservoirs3
Oil Displacement Efficiency of High-Power Water Flooding Displacement Core Experiment and Transformation Method of Reservoir Scale in Different Well Patterns3
Development of Polymer-Bitumen Composite and Asphalt-Concrete Mix Based on it Using Nonstandard Modifiers3
Synthesis of Nanocellulose-Reinforced Polyhydroxyethyl Acrylate Hydrogels3
Low-Temperature Flow Performance Improver for Saddle Diesel3
Molecular Dynamics Simulation of CO2 Hydrate Growth and Intermolecular Weak Interaction Analysis3
Increasing Drilling Speed in Hard-to-Drill Formations with Various Types of Tools3
Prediction of the Properties of Polyethylene Terephthalate and its Carbon Nanotube Composites3
Innovative Solutions Towards Achieving Comprehensive Restoration of Petroleum-Contaminated Soils3
Classification and Segmental Construction of Pseudo-Capillary Pressure Curve Using NMR T2 Spectrum3
Possible Ways to Decarbonize Oil and Gas Industry Using Small-Scale Associated Gas Utilization Technologies3
Optimization Method for the Structure of Drain Sand Jet Pump in Deep Coalbed Methane Wells3
Analysis of Influencing Factors of Pile Penetration of Jacket Platform Skirt Pile3
The Thermal Oxidative Aging of Petroleum Bitumens and Tars3
Research and Application of Temporary Blocking and Diversion Techniques for Fractures in Tight Oil Reservoirs3
Effect of Cod Gelatin and Sodium Alginate on the Nucleation of Gas Hydrates2
Pyrolysis of Oil Shale Based on Electromagnetic Heating Technology – A Review2
Research and Application of Plunger Airlift Draining Gas Recovery Intelligent Control Technology in Shale Gas Horizontal Wells2
Improving the Efficiency of Oil Displacement by Filtration of Fractured Carbonate Reservoirs and Nitrogen Flooding2
Modeling of Intensified Heat Exchangers with Different Viscosities of Fluids2
Formation of the Dispersion Medium of Plastic Greases for the Arctic and Far North2
Direction Optimization Model of Trenchless Horizontal Hole in Fractured Formation2
Hydrothermal Transformation of Organic Matter of Carbonate Rock near Critical Point of Water2
Research on Oil Production Forecasting Method of Tight Oil Reservoir Based on Grey Correlation Method2
Preparation and Performance Evaluation of the CQ-1 High-Temperature Acid Corrosion Inhibitor2
Analysis of Vibration Drag Reduction in Horizontal Wells2
International Approach to Well Integrity2
Experimental Study on the Characteristics and Diagenetic Processes of Typical Tight Oil Reservoirs2
Catalytic Vacuum Gas Oil Oxycracking in Presence of Metal Zeolite Catalysts2
Study on Theory and New Test Method of Casing External Collapse Strength in Simulated Curved Well2
Optimization of Drainage Indicators for High-Conductivity Fractured Gas Reservoirs Based on Embedded Discrete Fracture Models2
Animal Biomass as a Raw Material for Basic Organic Synthesis Products2
Catalytic Combustion Enhancement In-Situ for Heavy Oil Recovery2
Three-Proof Optimization of Gas Turbine Generator Set of Offshore Platform2
Experimental Study on Logging Evaluation of Matrix Mineral Modulus of Tight Sandstone Reservoir2
Hydrocarbon Group Composition of the Liquid Products of the Catalytic Oxycracking of Vacuum Gas Oil2
Pore Structure and Methane Adsorption Characteristics of Primary Structural and Tectonic Coals2
Regeneration of Used Fire-Resistant Triaryl Phosphate Oils2
Estimation of the Hildebrand Solubility Parameter of a Mixture of Petroleum‑Derived Solvents Using Their Structural Elements2
Quick Method for Biodiesel Impurities Detection and Determination in Hydrocarbon Fuels by Thin-Layer Chromatography2
Description of Formations Fault Activity Characteristics and Genesis Mechanism Using of Paleogeomorphic Restoration Techniques2
Calculation of Wellbore Fracture Pressure Under Multi Field Coupling Based on M-Integral of Configuration Mechanics2
Plant Biomass as a Raw Material for Producing Basic Organic Sysnthesis Products2
Study on Liquid Loading Patterns of Low-Pressure Gas Wells and Selection of Efficient Drainage Processes2
Facile n-Decane Encapsulation Through Surfactant-Free Pickering Emulsion Polymerization2
Study on the Simulation Law of Two-Phase Seepage in Gravel Based on Phase Field Simulation2
Application of GC/MS for Determination of the Content of Organochlorine Compounds in Chemical Reagents2
Analysis of Properties of Diesel Fuels of Different Origins for Their Use as Feedstock for Producing Hydrocarbon Bases for Drilling Fluids2
Effect of the Component Composition of Oils on their Structural and Mechanical Properties2
Experimental Study of Natural Gas Hydrate Formation in a Porous Medium in the Presence of Aqueous Solutions of Sodium Chloride and Sodium Bicarbonate2
A Laboratory Unit for Production and Pelletizing of Gas Hydrates2
Experimental Study of Gas Drive Chemical Analysis and Enhanced Recovery in Tight Oil Reservoirs2
Study on the Synthesis and Performance Evaluation of a Composite High-Temperature Flushing Isolation Fluid Stabilizer2
Pile Penetration Analysis and Suggestions of Jacket Platform Skirt Pile Sinking2
Eco-Friendly Gas Hydrate Inhibitors2
Study on ECD during the Construction of Extended Reach Wells2
Assessment of the Technical and Economic Efficiency of Two-Stage Hydro-Ejector Vacuum Systems2
Design of Oil Shale In-Situ Extraction Heater Structure and Numerical Simulation of the Fracturing Process2
Study on the Geochemical Properties of Oil Shale and Its Mineralization Potential2
Promising Formulations of Motor Oils with Nanodispersed Additives for Internal Combustion Engines2
Tracing the Origin of Hydrogen Sulfide in the J Oilfield2
Research on Fuel Temperature Control Method for Operation Safety of Railway Diesel Locomotive in Low Temperature Period2
Synthesis of Hydrate Formation Inhibitors Derived from Waterborne Polyurethane in Batch and Flow Reactors2
Glass Transition of Oil Fractions2
A Method for Rapid Prediction of Fracture Networks in Hydraulic Fracturing2
Catalysis by Ion‑Exchange Resins Derived from Asphaltenes in the Salicylic Acid Acylation Reaction2
Tracer Research Methods for Hydrocarbon Substances in Shale Oil Reservoirs2
Processing of the Arctic Shelf Oil2
Simulation Research on EOR Technology and Mechanism of Sandstone Reservoir Injected with Foam2
Flow Field Characteristics and Flow Response in Biodiesel Swirl Atomization Under External Excitation2
Recognition of Sand Bodies Based on Their Characteristics and Lithology2
Liquid-Liquid Phase Equilibria in the Water – Ethanol – Cyclohexane System2
Renewable Energy Technology Innovation Effect on the Economics Growth2
Growth Features of Gas Hydrate Films at Interface of Liquid Carbon Dioxide with Water and Sodium Dodecyl Sulfate Solution in Teflon and Steel Cuvettes2
Evaluation of the Performance of New Surfactants and Study of Enhanced Recovery2
Numerical Simulation of Gas Hydrate Decomposition for Single and Double Outlet Depressurization2
Study on CO2 Injection Enhanced Oil Recovery Method and Buried Mechanism in Low Permeability Gas Reservoir2
Some Approaches to the Assessment of Shale Oil and Gas Resources2
Characterization and Application of Quartz from Different Sources in Typical Shale Reservoirs2
Correction to: Water Cone Dynamic Prediction of Bottom Water Reservoir Considering Oil-Water Interface Dynamic Change2
New NiMo/Al2O3 Catalysts for Hydrodearomatization of Secondary Middle Distillates2
Study of Perovskite Catalysts for Carbon Dioxide Conversion of Methane2
Design and Development of Oilfield Exploration and Development Data Exchange Management Platform2
On the Issue of Gas Leakage Evaluation in Section of Gas Field2
Design and Performance Analysis of Drillstring Vibration Energy Harvester2
Optimal Design of Adsorbers for Separation of Gas Mixtures2
Development and Performance of Urea–Formaldehyde Resin/Montmorillonite Intercalation Composite Horizontal well Plugging Agent2
Simulation Analysis of Wellbore Instability Considering the Influence of Hydration Effect on the Physical Properties of Brittle Shale2
Effects of Magnetic Fields on Combustion and Explosion2
Feasibility of Using a Liquid Bioproduct in the Manufacture of Commercial Diesel Fuel2
Stability Study of Carbon Nanotube-Deionised Water Nanofluid Electrolyte2
Processing of Straight-Run Gasoline Over Copper-Containing Zeolite Catalysts2
0.16681289672852