Corrosion

Article	Citations
Mitigating High-Temperature Oxidation of PCrNi1MoA Steel through Cr/CrN Multilayer Coating Protection	57
Viability of Cathodic Protection for Preventing Corrosion of Stainless Steel 316H in Molten LiF-NaF-KF	27
Coupling Effect of Precipitates and Hydrogen on Pitting Corrosion of Stainless Steel	20
Short- to Medium-Term Corrosion of Mild Steel in Highly Calcareous Seawaters: Effects of Calcium Carbonate Concentration, Coupon Orientation, and Nutrient Addition	19
Initiation and Propagation of Localized Corrosion on Cold-Sprayed Aluminum Alloy 2024 and 7075	16
Evolution of Surface Changes and Corrosion Kinetics During Atmospheric Corrosion in Seacoast Environment, Part II: Low Carbon Steel	16
Effect of Graphene on Corrosion Resistance of Low Zinc Epoxy Coatings Applied to Low-Carbon Steel	14
Corrosion Resistance of 309L Stainless Steel Claddings on Carbon Steel Produced with Wire-Fed Directed Energy Deposition	14
On Methodology for Reliable Corrosion Testing of Pipeline Steel in Dense Phase CO2	13
Determination of the Chloride Threshold of Cr-Based Steel Rebars in a Synthetic Concrete Pore Solution Based on Electrochemical Methods	13
Effect of Oil/Water Intermittent Wetting on CO2 Corrosion in the Presence of Acridine and Myristic Acid	13
Environment-Assisted Crack Initiation in Aluminum Alloys Studied by Local Probe Techniques	13
Corrosion of Surface-Treated Type 304 Stainless Steel in Alkaline Subcritical Water	12
Synthesis and Anticorrosion Properties of Self-Healing Polydimethylsiloxane Polyurea Coatings	11
Long-Term Performance of Ag/AgCl Reference Electrodes for Corrosion Potential Monitoring in Radioactive Tank Waste at the Hanford Site	11
The Corrosion Behavior of Refractory Body-Centered Cubic High-Entropy Alloys in Molten Cerium	10
Oxidation Behavior of Si-Modified Aluminide Coatings on K438 Superalloy Prepared Using a Hybrid Slurry/Pack Cementation Process	10
Reliance of Corrosion Characteristics for Two Iron-Based Alloys on the Water Content in 1-Butyl-3-Methylimidazolium Tetrafluoroborate	10
Influence of Inclusions on the Pitting Behavior of Cast Duplex Stainless Steels and Patch Weld Layers	10
Oxidation of a CeO2-Dispersed-Al Chromium Coating	10
Creep Crack Growth of 316H Stainless Steel in a Simulated AGR Environment	10
Technical Note: Considerations to Avoid Corrosion Rate Estimate Error of the Reinforcing Steel if Based Only on Concrete’s Electrical Resistivity	10
The Elimination of Intergranular Stress-Corrosion Cracking in the Corrosion of Cu-Mn Alloys	9
Localized Corrosion of Chromium-Containing Conventional and Multiprincipal Element Alloys in Methanol and Aqueous Chloride Environments	9
Atmospheric Corrosion Modeling and Corrosivity Categorization of 1008 Carbon Steel in Alaska	9

AMPP+S: Corrosion Protection = Sustainability	9
Removal of Iron Carbide in Turbulent Flow Conditions and Influence of Iron Carbonate Formation in Aqueous CO2 Corrosion of Mild Steel	9
Effects of CO2 Solubility on Corrosion of N80 Tubing in Formation Water	9
Corrosion-Resistant Stainless-Steel Strands for Prestressed Bridge Piles in Marine Atmospheric Environments	9
Electrochemical Corrosion Behavior of Explosively Welded Ti/Type 304L Stainless Steel in Nitric Acid	9
To What End? A Review of Recent Trends in Microbiologically Influenced Corrosion Research 1990 to 2023	9
A Multifactor Coupling Prediction Model for Crack Growth of HP-13Cr Stainless Steel Under Extreme Oilfield Environments	8
Pitting Behavior of a Super Ferritic Stainless Steel: Role of Primary and Secondary Precipitates After Heat Treatment	8
Development of Accelerated Galvanic Corrosion Testing for Evaluating Heat Exchanger Corrosion Penetration Lifespan	8
Challenges for the Corrosion Science, Engineering, and Technology Community as a Consequence of Growing Demand and Consumption of Materials: A Sustainability Issue	8
Data-Driven Machine Learning Analysis of Nonlinear Environmental Drivers of Marine-to-Inland Atmospheric Corrosion in Aluminum Alloys	8
In Memory of Glenn E. Stoner	7
Effects of Matrix and Dendrite Boundary Composition on Stress Corrosion Cracking Performance of Alloy 52M Buttering Layer in Simulated Pressurized Water Reactor Primary Water	7
Effect of Magnetic Field on Structure, Hardness, and Corrosion Resistance of Electrodeposited Cu-TiO2 Nanocomposite Coatings Applied on Low Carbon Steel	7
Key Challenges for Internal Corrosion Modeling of Wet Gas Pipelines	7
Erosion Wear of High-Pressure Throttle Valves: A Review	7
Dynamical In Situ Study of Morphological Variations on Stainless Steel in a Sour Corrosive Environment	7
Hydrogen Sulfide Concentration Influence Toward Uniform and Localized Corrosion Rate of API 5L X65 Steel at Elevated Temperature	7
Experimental and Computational Comparison of Two Chromate-Free Corrosion Protection Coatings for Mitigating Galvanic Attack on AA7075 Coupled to Corrosion-Resistant Steel A286 and Ti-6Al-4V	7
Effect of Tri-Metallic Microgalvanic Corrosion on Localized Corrosion Based on Numerical Simulation: Geometric Effect of Intermetallic Compounds	6
Delinkage of Metal Surface Saturation Concentration and Micellization in Corrosion Inhibition	6
The Accuracy and Efficiency of a Single-Level Fast Multipole Boundary Element Model for Analyzing Cathodic Protection of Large Pipeline Networks	6
Corrosion at Top-of-the-Line in High Pressure and Dense CO2 Environments	6
Investigation of CO2 Corrosion and Erosion in Pipelines Using a Computational Fluid Dynamics-Discrete Element Method Approach	6
Detrimental Effect of Surface Mechanical Grinding on Stress Corrosion Behavior of Monel 400 Alloy in Hydrofluoric Acid Vapor	5
Technical Note: Corrosion Behavior of 316 Stainless Steel With and Without an Ni Coating in Solid-State Fluoride Salt	5
Stress Corrosion Cracking Analysis of Gas Tungsten Arc-Welded 304 Stainless Steel Joints in Marine Environment	5
Numerical Simulation and Prediction of Corrosion Behavior of Low-Carbon Steel Under Different Salt Spray Concentrations Based on Cellular Automata	5
Modeling Electrochemical Performance of Reinforced Concrete in Natural Marine Airborne-Exposure Environments: DURACON Project,10-Year Evaluation	5
Predicting Microbiologically Influenced Concrete Corrosion in Self-Cleansing Sewers Using Meta-Learning Techniques	5
Localized Corrosion of High-Grade Stainless Steels: Grade Selection in Chlorinated Seawater	5
Mechanisms of Environmentally Induced Crack Initiation in Humid Air for New-Generation Al-Zn-Mg-Cu Alloys	5
ERRATUM	5
Effect of thermal aging on the corrosion fatigue crack growth of Z3CN20-09M stainless steels in simulated PWR primary water	5
Development of Pitting Corrosion for Mild Steel Exposed to Particulate Media and Natural and Nutrient-Dosed Seawaters	5
Microstructural and Electrochemical Analyses of Al-Zn-In Sacrificial Anode Produced Using Semisolid Slope Casting Process Under Various Casting Conditions	5
The Role of Nickel in Low Alloy Steels Exposed to H2S-Containing Environments. Part I: Trench Formation at the Open-Circuit Potential	5
Laser Surface Melting to Mitigate Intergranular Corrosion of Sensitized AA5083	5
The Impact of Temperature on CO2 Corrosion and the Formation of Corrosion Product Film	5
Corrosion Behavior of Pure Fe, Cr, and Mo Under Solid NH4Cl and Oxygen-Free Water Vapor Environment	5
Sensitization of 316L Stainless Steel made by Laser Powder Bed Fusion Additive Manufacturing	5
Deciphering when Metal Corrosion is Spontaneous in Molten Fluorides Using Potential-Activity Diagrams	5
NbC/Nb Film-Modified Stainless Steel Bipolar Plate for Proton Exchange Membrane Fuel Cell	5
Development of Numerical Calculation Method of Formation of Corrosion Products in Galvanic Corrosion	5
Formation and Protectiveness of Fe/Ca Carbonate Layer on X80 Steel in High-Pressure CO2 Corrosion Environments	5
Characterisation and Performance Testing of Additively Manufactured Alloy 625 in High Temperature Water	5
Modeling the chemistry of corrosive dropout in dense-phase CO2 transport systems using the Mixed-Solvent Electrolyte (MSE) model	5
Effects of Temperature and Thiosulfate Concentration on the Crevice Corrosion of Alloy 800 Under Layup Conditions	5
Oxidation of NiCr and NiCrMo Alloys at Low Temperatures	5
Empirical Model for Predicting Corrosion Under Insulation Considering the Effects of Temperature, Salinity, and Water Content	5

Effect of Sputtering Bias Voltage on the Microstructure and Lead-Bismuth Eutectic Corrosion Resistance of the FeCrAlY Coating	5
Bipolar Metal Bridge for Electrochemical Tests in Autoclave	5
Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations	5
Synthesis, Characterization, and Theoretical Calculations of a Novel Organic Corrosion Inhibitor for Mild Steel	4
Influence of Excessive Nitrogen on Sensitization and Hardness of a Supermartensitic Stainless Steel	4
Effect of Flow on the Corrosion Behavior of Pipeline Steel in Supercritical CO2 Environments with Impurities	4
Rapid Pitting of Copper Tube from Deposits of Cathodic Manganese in Hot Water Systems: Mechanism and Effects of Water Chemistry	4
Study on Failure Behavior of Alloy 625 in a Hydrogen-Containing Environment	4
Lithium Carbonate and Oxalate Salts as Corrosion Inhibitors for Magnesium Alloy AZ31B in NaCl Solution	4
The Effect of Heat Treatment and Build Orientation on the Susceptibility of Laser Powder Bed Fusion Additively Manufactured Alloy 625 to Crevice Corrosion	4
Oleic Acid Transfer from Oil to Water as a Perspective of Water-Dispersible Corrosion Inhibitor	4
Effect of Nano-TiC Addition on Microstructure and Corrosion Resistance Behavior of NiTi Alloy Fabricated by Selective Laser Melting	4
Mechanistic Insight into Al-Zn, Mg, and Al-Mg-Rich Primer Design for Enhanced Cathodic Prevention on Sensitized Al-Mg Alloys	4
Corrosion Resistance of Alloy 690 in High-Temperature Water with Various Dissolved Hydrogen Concentrations	4
Improved AC/DC/AC Method for Evaluating the Corrosion Resistance of Polymer Coatings with Defects	4
The Effect of Crack-Initiating Feature on the Environment-Assisted Cracking Behavior of Sensitized AA5456-H116 in Marine Environments	4
The Assessment of Pit Chemistry Parameters of 316 Stainless Steel and 304 Stainless Steel by Adding a Molybdate Inhibitor in a Chloride Aggressive Media	4
Manufacturing of a Smart Coating by Using SiO2 Nanoparticles and Hexamine	4
Development of a Method for Determining the Residual Life of Structural Elements with Cracks Under the Action of Load and Corrosive Environment, as well as the Application of Corrosion Inhibitors to E	4
Influence of Electron Mediator on Microbiologically Influenced Corrosion Behavior of 2024 Aluminum Alloy	4
Environment-Induced Crack Initiation and Early Stages of Crack Growth in Aluminum Alloys, Part 2	4
Introduction to the Research Topical Symposium Special Issue on Microbiologically Influenced Corrosion (in honor of Brenda Little), Part 1	4
An Investigation of Corrosion Behaviors of Thermally Sprayed Aluminum at Elevated Temperatures Under Thermal Insulations and Autoclave Immersion Conditions	4
Underground Storage Tanks: A Review of an Unseen Aging Infrastructure	4
Quantitative Evaluation of the Ability of Accelerated Tests to Simulate On-Road Corrosion Morphology of Automotive Aluminum Alloys	4
On the Use of Ferrous Sulfate Treatment to Enhance the Corrosion Resistance of Copper-Nickel Alloys	4
Electrochemical Corrosion Studies of Low-Alloyed Carbon Steel in Acidic Methylimidazolium Derivate Ionic Liquids with Varying Water Content	4
Corrosion Behavior of Supermartensitic Stainless Steel 13Cr and Stainless Steel 316L Under Chloride Solution and H2S/CO2 Environments	4
Influence of Alloying Elements and Chloride Concentration on the Galvanic Corrosion of Ferrous Alloys Coupled to Graphite	4
An Industrial Perspective on Challenges in the Lifetime Prediction of Organic Coatings: A Century Retrospective Review	4
Durability in Design of Light Rail Reinforced Concrete Structures	3
Intergranular Corrosion of Feedstock Modified—Additively Manufactured Stainless Steel After Sensitization	3
Corrosion of Carbon Steel by a Thermophilic Sulfate-Reducing Consortium Enriched from Oilfield-Produced Waters	3
The Role of Nickel in Low Alloy Steels Exposed to H2S Containing Environments. Part II: Effect of the Electrochemical Potential and Stress Level on Trench Formation	3
Effect of Testing Conditions, Gauge, and Temper on Stress Corrosion Cracking of AA7xxx Aluminum Aerospace Plate Alloys	3
Corrosion of Stainless Steels S31603, S31655, and S32101 in Sulfuric Acid Solutions: Effects of Concentration, Chlorides, and Temperature	3
Fatigue Crack Growth of Z2CND18-12N Austenitic Stainless Steel and Its Heat-Affected Zone in a Dissimilar Metal Weld Joint in 325°C Water	3
Influence of Near-Surface Severe Plastic Deformation on the Corrosion Behavior of GTD-111 Nickel Superalloy in Hydrofluoric Acid Solution	3
Design of a new stress corrosion cracking test for austenitic stainless steel welds	3
Corrosion Characterization of X70 Steel with Coating Damage Under Mixed AC/DC Interference	3
Influence of Insulation Stand-Off Membranes and Moisture Drainage on the Corrosion Under Insulation Behavior of Out-of-Service Carbon Steel Piping	3
Galvanic Corrosion of Strands in Re-Grouted, Post-Tensioned Concrete Bridges	3
The Effect of Composite Stabilization on the Repair Behavior of Weathering Steel Rust Layer Under a Simulated Highly Polluted Industrial Atmospheric Environment	3
Toward High-Pitting Resistance and Low-Cost Austenitic Stainless Steel: The Role of Carbon Alloying	3
Mechanism of Corrosion of Cast Aluminum-Silicon Alloys in Seawater. Part 2: Characterization and Field Testing of Sol-Gel-Coated Alloys in the Adriatic Sea	3
Electrochemical Evaluation of Al-5 wt% Zn Metal-Rich Primer for Protection of Al-Zn-Mg-Cu Alloy in NaCl	3
Decoding the Mysteries of Microbiologically Influenced Corrosion: The Need for a Multidisciplinary Approach for Integrating Multiple Lines of Evidence	3
Corrosion Ferritic Stainless Steel in a Simulated Hydrothermal Liquefaction Bioconversion Aqueous Solution: Effect of Surface Cr Content	3
Unlocking the Potential of Volatile Corrosion Inhibitor Films: A Comprehensive Study on Protective Efficiency	3
Dynamic Impedance-Based Evaluation of Inhibition Efficiency Using Benzimidazole as a Carbon Steel Corrosion Inhibitor	3
Corrosion Prediction Model for Long-Distance Pipelines Based on Nonlinear Feature Expansion-Northern Goshawk Optimization-Extreme Learning Machine	3
Bimodal Trending in Corrosion Loss of Magnesium Alloys	3
Two- and Four-Electrode Configurations for Contactless Reinforced Concrete Corrosion Monitoring	3
Development of the NACE MR-01-75 and NACE TM-01-77 Standards, Part I: Field Observations and Metallurgical Factors	3
Effect of Marine-Industrial Microenvironments on the Corrosion Performance of Multilayer Coatings	3
Electrochemical Study on Corrosion Damage of 7B04 Aluminum Alloy/Anodic Film/Epoxy Coating System in a Simulated Marine Atmospheric Environment	3
Corrosion Research and Fractal Characteristics of As-Cast and Semisolid AZ91D Magnesium Alloys	3
Environment-Induced Cracking of High-Strength Al-Zn-Mg-Cu Aluminum Alloys: Past, Present, and Future	3
Selective Oxidation of Fe-Cr-Mn Stainless Steel in Supercritical Water	3
Electrochemical Behavior of Reinforced Concrete Beams with Different Flexural Tensile Stresses in the Steel Reinforcement	3
Stress Corrosion Cracking of Steam Generator Tubes in Alloy 690TT: Effect of Sulfur and Lead on the Damage Mechanisms	3
On the Occurrence of Filiform Corrosion on Organic-Coated Carbon Steel Exposed to Cyclic Aging Test	3
Galvanic Corrosion Between Coated Al Alloy Plate and Stainless Steel Fasteners, Part 2: Application of Finite Element Method and Machine Learning to Study Galvanic Current Distributions	3
Corrosion Behavior of Weathering Steel in Atmospheric Environment Containing Fine Particulate Matter and the Influence of Stabilization Treatment	3
Development of the NACE “MR-01-75” and NACE “TM-01-77” Standards, Part II: Accelerated Material Qualification Testing in Sour Environments at Near Atmospheric Pressure	3
Mechanisms in Long-Term Marine Corrosion of Steel Reinforcement in Concretes	3
A Comparative Study of Zinc Phosphate and Zirconium-Based Conversion Coatings on Galvannealed Steel: Effect on Corrosion Performance of Electrocoated Systems	3
Coupling Fracture Mechanics Experiments and Electrochemical Modeling to Mitigate Environment-Assisted Cracking in Engineering Components	3
Performance of a Volatile Corrosion Inhibitor for Mitigating Corrosion Under Insulation	3
Comprehensive Electrochemical Studies on Nanolayered Multilayered Ti/TiN and TiAl/TiAlN Coatings Deposited on Ti6Al4V Substrates	2
Coupled RSM–Multiphysics Modeling of Salt Spray Corrosion in 16Mn Steel for Offshore Platforms	2
Study of Galvanic Coupling Corrosion of 20# Carbon Steel/H62 Brass in Flowing Seawater Environment Based on Wire Beam Electrode Technique	2
2023 in Review	2
Corrosion Propagation Phase Modeling of Cracked In-Ground Reinforced Concrete Elements for a 100-Y Design Life	2
Advancements in ASTM G170 Rotating Cage: Geometric Modifications and Impacts on the Fluid Dynamics and Uniformity of Wall Shear Stresses	2
Comparative Electrochemical Impedance Spectroscopy Quantification of Coating Weathering, Long-Term Immersion, and Salt Spray Test Outcomes	2
Effect of the Tempering Process on the Corrosion Performance of Wire Arc Additively Manufactured 420 Martensitic Stainless Steel	2
Effects of Salt Spray on Corrosion of a Pipeline Steel in Liquid	2
Conversion Treatment of Carbon Steel Using an Atmospheric Plasma-Based Process	2
Stress Corrosion Cracking of 13Cr-5Ni-2Mo Martensitic Stainless Steel in Methanol	2

Synthesis and Properties of a New Environmentally Friendly Bicyclic Imidazoline Quaternary Ammonium Salt as a Corrosion Inhibitor of Carbon Steel	2
Localized Corrosion in Seawater: A Bayesian Network-Based Review	2
Effect of Predeformation on Corrosion Fatigue Crack Growth of Type 316NG Steel in 325°C Deaerated Water	2
Understanding the Corrosion Inhibitor Dispersion Process in Water through Interaction between Stearic Acid and Alkane	2
Progress and Opportunities in Computational Modeling of Localized Corrosion	2
Metallurgical approach to in situ reverse sensitization of Al-Mg naval alloy	2
Applicability of the Formation Factor for Different Alternative Binder Types Investigated on Mortars	2
Effect of Oil-Water Intermittent Wetting on Corrosion Inhibition of Carbon Steel in CO2 Environment	2
Molecular Origin of the CO2-Enhanced Water Wetting During Corrosion of an Oil Layer-Attached Steel Surface in Water Flows	2
Effects of Lorentz Force and Gradient Force of Magnetic Field on the Seawater Corrosion Behavior of Carbon Steels	2
SEM-FIB and TEM Characterization of the Microstructure and Oxides in Base Metal at Weld Roots of EDF Safety Injection Pipeline	2
Comparative Analysis of Aerobic vs. Anaerobic Environments on Microbiologically Influenced Corrosion in Industrial Water	2
Understanding Initiation and Evolution of Pitting Corrosion in 7075-T6 Aluminum Alloy by Four-Dimensional X-Ray Microtomography	2
Cathodic Protection Potential Distribution and Anode Ground Bed Optimization Scheme for Low-Pressure City Gas Pipe	2
Corrosion Behavior of Q420qNH Plate and Welded Joint in Deicing Salt Medium by Cyclic Immersion + Infrared Drying	2
Performance Optimization of Al-Zn-In-Sn-Mg Al-Based Sacrificial Anodes in Oilfield Produced Water Environments with CCUS Technologies	2
Pitting Corrosion of Mild Steel in Long-Term Contact with Particulate Media in Seawater	2
Corrosion Mechanisms of Plasma-Sprayed Porous Coatings of Ni80Cr20 and Alloy C-276 Investigated by Numerical and Experimental Methods	2
Optimization of Mn-Al-P Chemical Conversion Coating for a Process Sequence Adjusted Low Sn-Coated Steel	2
Evolution of Surface Changes and Corrosion Kinetics During Atmospheric Corrosion in Seacoast Environment, Part I: AA2024-T3	2
Effect of Anodic Polarization on the Susceptibility of AA6111 Automotive Sheet to Stress Corrosion Cracking	2
Influence of Mechanical Torsion on MgCa1 Corrosion Behavior in Simulated Body Fluid	2
A Comprehensive Characterization of Environmental Severity Across 25 Sites in Nine Climactic Zones. Part 1: Witness Coupon Evaluation	2
Experimental and Modeling Investigation of Factors Affecting Crud Deposition in PWRs: Role of Zn, Ni, and Redox Potential	2
A Limited Evaluation of the Applicability of NACE MR0175/ISO 15156 H2S Limits to Supercritical CO2 Pipelines	2
Corrosion Inhibition Performance and Mechanism of a Phosphorus-Free, Nitrogen-Free Polymer for Q235 Carbon Steel in Artificial Seawater	2
Residual Bond Strength of Highly Corroded Reinforced Concrete	2
Influence of Anions on the Corrosion Behavior of 9Cr-1Mo Ferritic Steel in Aqueous Media	2
A Review of the Governing Factors in Pit-to-Crack Transitions of Metallic Structures	2
Differences in Atmospheric Corrosion Severity Over Long and Short Distances	2
Corrosion Mechanisms of s13Cr Martensitic Stainless steel in Potassium Pyrophosphate-Based Completion Fluids	2
Pitting Propagation Behavior on Low Alloy AISI 4130 (UNS G41300) Steel Exposed to Various Alkali and Alkaline Earth Metal Chlorides	2
Effect of Mo Addition on Passive Film of Martensitic Stainless Steels by Semiconductor Analysis in H2S-CO2 Environment	2
Searching for Evidence of Hydride Formation on Corroding Magnesium	2
A Comprehensive Characterization of Environmental Severity Across 25 Sites in Nine Climactic Zones. Part 2: Corrosion Sensors	2
Development of Reliable Accelerated Corrosion Tests for Aluminum Alloys Used in the Aerospace Industry	2
The Effects of Cl− and Selected Deoxidizers on the High-Temperature Corrosion Electrochemistry of Alloy 690 in Nuclear Steam Generator Water	2
Design and Discovery of Compositionally Complex Alloys that Include High Corrosion Resistance	2
Atmospheric Corrosion of Steel Infrastructure in Canada Under Climate Change	2
Effect of Cathodic Protection Design for Galvanic-Coupled Components on Localized Corrosion Resistance of Aluminum Heat Exchanger	2
Optimizing Sour Gas Qualification Testing—Modeling the Effects of Temperature and Total Pressure on H2S Fugacity, Activity, and Solubility Coefficients up to 138 MPa and 204°C	1
Reflections on 2025	1
Evaluating 1-Benzyl-4-Phenyl-1H-1,2,3-Triazole as a Green Corrosion Inhibitor in a Synthetic Pore Solution to Protect Steel Rebars	1
Methodology for Corrosion Inhibitor Persistency Studies in Batch Inhibition	1
Effect of Aggressive Anions on the Stress Corrosion Cracking of Stainless Steel in Hot-Pressurized Alkaline Water	1
Research on Dynamic Alternating Current Corrosion Behavior of X65 Pipeline Steel Under Cathodic Protection	1
Effect of Chloride Concentration on the Environment-Assisted Cracking Behavior of an Al-Mg Alloy in Atmospheric Environments	1
Mapping of Atmospheric Corrosion of Steel in Southeast India Using Inverse Distance Interpolation Technique	1
Microcrystallographical Characterization of Initiation of Intergranular Stress Corrosion Cracking on Alloy 600 in Terms of Local Stress at Grain Boundary Induced by Slip Deformation	1
Correlation of Stainless Steel Pit Morphology to Humidity-Specific Sea Salt Brine Constituents	1
Self-Sustained Constant Anodic Dissolution Rate on Iron Electrode Under a Magnetic Field	1
Corrosion Behavior of Carbon-Manganese Steel-Welded Joints in Typical Marine Atmospheric Environment	1
Corrosion Behavior of DH36 Steel in the Presence of Acid-Producing Bacterium Citrobacter farmeri	1
Mitigation of Environmental-Assisted Cracking in Martensitic Stainless Steel via ZnNi Plating in Sodium Chloride Solution	1
Erosion-Corrosion Behavior and Mechanism of TiAlN Coating Under Different Flow Conditions in Simulated Seawater	1
An Experimental Survey of Anodically Enhanced Cathodic Kinetics of Magnesium Alloys	1
Stress Corrosion Cracking Behavior of Austenitic Stainless Steel 316L Produced Using Laser-Based Powder Bed Fusion	1
Effects of Surface Inclusion Modification on Pitting Initiation in 2205 Duplex Stainless Steel: A Statistical Investigation	1
Special Issue on New Approaches to Life Prediction	1
Technical Note: Study on Accelerated Corrosion Behavior and Mechanism of X80 Pipeline Steel Welded Joint Under Cyclic Salt Spray Test	1
Leveraging Finite Element Method Modeling to Evaluate ZnNi Plating as a Mitigation Strategy for Galvanically Induced Environmental-Assisted Cracking of a P675-Anodized Titanium Multicomponent Assembly	1
Influence of Acetic Acid on Hydrogen Sulfide Corrosion Mechanisms of Mild Steel	1
Study on the Corrosion Behavior of LA141 Mg-Li Alloy in Different Cl− Environments	1
Applying Sour Service Material Requirements for Material Selection of Isolation Valves in Gaseous Hydrogen Environments	1
New Manuscript Type Launched at CORROSION on the Topic of Corrosion Education	1
Galvanic Corrosion of Tinned Copper Coupled with Aluminum Alloy in Electric Vehicle	1
Improving the Long-Term Protection of Buried Steel Tanks: Considering the Impact of Temperature and Extended Sacrificial Anodes	1
Investigation of Iron Dissolution Mechanism in Acidic Solutions with and without Dissolved CO2—Part II: Time of Flight-Secondary Ion Mass Spectrometry 3D Mapping	1
Corrosion Behavior of X80 Steel in a Simulated Soil Solution Under Square-Wave Current Interference	1
Corrosion Behavior of FeCoNiCrAl High-Entropy Alloy in Molten NaNO3-KNO3	1
Effect of Some Environmental and Stainless Steel Metallurgical Variables on the Values of Degree of Sensitization Measured by the Double Loop-Electrochemical Potentiokinetic Reactivation Test	1
The Impact of Trisodium Phosphate on Chloride-Driven Under Deposit Corrosion in Steam Generators	1
Parametric Modeling of Internal Cathodic Protection System in Elevated Water Storage Tank	1
Enhancing the Corrosion Resistance of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion via Adding Niobium Particles	1
In Situ Measurement of Stress Corrosion Crack Tip Properties During Environmentally Induced Cracking in Stainless Steel 304L	1
Corrosion Behavior of 17-4PH Martensite Stainless Steel Sprayed with Sodium Hypochlorite Disinfectant	1
Crevice Corrosion of High-Grade Stainless Steels in Seawater: A Comparison Between Temperate and Tropical Locations	1
Corrosion of S32205 Duplex Stainless Steel	1
Stress Corrosion Cracking of High-Strength Ni-Base Alloys in Pressurized Water Reactor Primary Water Containing KOH vs. LiOH	1
Corrosion of Steel Pipelines in Supercritical CO2 Environments: Effects of Injection Pressure and Temperature	1
Effect of a Small Amount of Cr and Mo on Aqueous CO2 Corrosion of Low-Alloyed Steel and Formation of Protective FeCO3 in Near-Saturation Conditions	1
Reflecting on the Design and Implementation of a Corrosion Course	1
Crack Growth Behavior in High pH Carbonate/Bicarbonate Environments: Application of Crack Tip Strain Rate Modeling	1
Exfoliation Corrosion Susceptibility of Variously Treated High-Strength 7068 and 5059 Alloys	1
Effect of Small Amounts of Cr and Mo on Aqueous CO2 and H2S Corrosion of Low-Alloyed Steel	1
Corrosion Behavior of Epoxy/Polysulfide Coatings Incorporated with Nano-CeO2 Particles on Low Carbon Steel Substrate	1
Hydrogen Embrittlement Susceptibility of Ti-6Al-4V Alloys Fabricated by Electron Beam Melting in Simulated Deep-Sea Environment	1
Effect of H2S on CO2 Corrosion of Mild Steel in High-Temperature Supercritical CO2 Conditions	1
Detection and Assessment of Hull Plate Corrosion Damage Based on Image Recognition Techniques	1
Corrosion Assessment for Aging Treatment of Rolled and Selective Laser Melting 18Ni 300 Maraging Steel	1
Real-Time Electrochemical Monitoring of the Progress of Sulfate Reducing Bacterially Induced Corrosion of Carbon Steel	1
Hydrogen Embrittlement and its Prevention in 7XXX Aluminum Alloys with High Zn Concentrations	1
Effects of Acetic Acid on the Initiation of Pitting Corrosion and Stress Corrosion Cracking on Low-Alloy Steel in pH Buffer Solutions	1
Nanoporous Oxide Formation and Corrosion Behavior of Stainless Steel in Chloride and Borated Media	1
The Role of Microstructural Iron Carbide Content on Inhibition of Galvanic Coupling-Driven Localized Corrosion Propagation	1