Electrochimica Acta

Article	Citations
ISE pages	173
Stable conge red doped poly (3,4-ethylene dioxythiophene)/graphene oxide composite as electrode material for high-performance asymmetric supercapacitors	172
Honeycomb porous N-doped carbon synergized with ultrafine Ni2P electrocatalyst for boosting polysulfide conversion in lithium–sulfur batteries	126
Amperometric biosensors and coupled enzyme nonlinear reactions processes: A complete theoretical and numerical approach	121
Hollow porous Co-N dual-doped oxygen reduction reaction catalyst prepared using spherical nanosheet structure template	121
Two-dimensional parametric investigation of zinc-air fuel cell with flowing electrolyte by numerical method	106
Editorial Board	100
Modeling supercapacitors with the simplified Randles circuit: Analyzing electrochemical behavior through cyclic voltammetry and Galvanostatic charge-discharge	99
Heterophase interfacial hybrid//graphene nanoscrolls based high performance lithium-ion hybrid supercapacitor	98
Selective detection of riboflavin biomolecule via electroreduction over laser induced graphene-anchored iron nanoparticles using spectroelectrochemistry	98
Realizing highly stable zinc-ion batteries via electrolyte engineering with adsorbed molecular protective layer	97
Temperature-dependent electrosynthesis of PEDOT:PSS: Enhanced Na+ transfer targeting high-performance Na-ion batteries	88
Mechanism comparison of heterogeneous and electro-enhanced heterogeneous activation of peroxymonosulfate based on CoFe2O4 nanoparticles for gatifloxacin degradation	86
Effect of permanganate ions on corrosion inhibition of Mg-Al-Mn alloys containing different amounts of Li	86
A novel gel polymer electrolyte of lithium metal batteries with enhanced interface compatibility and ion conductivity using multifaceted modification strategies	85
Pyranopyrazole derivative, a new corrosion inhibitor designed for managing the corrosion problem of aluminum metal in alkaline solution	82
Au-Ni Rotating Ring–Disk Electrode (RRDE) study: A new and rapid screening technique for quantitatively detecting aldehyde during electrochemical alcohol oxidation reaction	81
Understanding the layer composition, its origin and impact on the Al2O3 modified Nickel-rich layered oxide by quantitative analysis	81
Pre-embedded strategy for anti-NOM poisoning performance of palladium nanoparticles in electrocatalytic dechlorination	81
Experimental investigation of OER catalysts under real-life conditions in half-cell setup for Anion Exchange Membrane Water Electrolysis	79
Electrochemical reduction of trichloroethylene in an electrolyte based on acetonitrile and Bmim-BF4 ionic liquid: A computational perspective	78
Suppression of interference from dissolved organic matter using anionic surfactant for electrochemical detection of heavy metals	78
Investigation of operating conditions for 200 kW fuel cell system based on electrochemical impedance spectroscopy	78
Optimizing the electrocatalytic hydrogen production with vanadyl porphyrin impregnated on mesoporous SiO2 nanoparticles	76
Study of surface-active substances using alternating current voltammetry and mercury electrode by potentiostat without phase sensitivity modules	76

Electrochemical immunosensor based on NiO for CA 15–3 detection and agent-based modelling for treatment optimization	74
Heterogeneous MoS2@CNPs hybrid with expanded interlayer spacing for aqueous rechargeable zinc-ion batteries	73
Cyclohexanehexone-assisted one-step ball-milling of graphite to graphene composites as cathodes for lithium-ion batteries	72
Black phosphorous nanosheets@CNTs hybrid composite for boosting conversion of polysulfides in lithium sulfur batteries	72
Electrochemical sensor based on carbon nanohorns and hydrophobic deep eutectic solvent for the determination of serotonin in biological samples	71
Auto-reduction of Au(III) on Fe-Doped, Pyrrolic-N-Modified nanoporous carbon derived from ZIF-8 for the electrochemical immunosensing of CA-125	71
Co0.85Se@carbon nanotubes surface-seeding grown on carbon microplates as superior anode material for sodium ion batteries	71
Investigating the impact of functionalized graphene oxide on the properties and performance of Poly(2,6-Dimethyl-1,4-Phenylene Oxide)-based anion exchange membranes for fuel cells	71
Physical ageing effect on water uptake and adhesion of epoxy coatings by EIS and the blister test	71
Porous carbon foam loaded CoSe2 nanoparticles based on inkjet-printing technology as self-supporting electrodes for efficient water splitting	70
Recent SI	70
Anodic electrocatalytic behavior of graphite supported TiO2 towards the generation of hydroxyl radicals	69
Anodic Sb2S3 electrodeposition from a single source precursor for resistive random-access memory devices	69
High capacity Co0.8Fe0.2S2 thermal battery cathode prepared by a solid-state synthesis technique	69
Interfacial layer rich in organic fluoride enabling stable cycling of high-voltage PEO-based solid-state lithium batteries	69
Facile fabrication of mechanically robust flexible asymmetric supercapacitors based on mesh electrode	67
Humidity-resistant triboelectric nanogenerator and its applications in wind energy harvesting and self-powered cathodic protection	67
Effect of fresh and aged biochar on electrogenic hydrocarbon degradation in soil microbial electrochemical remediation	66
Intriguing properties of graphite/polysiloxane composite-based pencil electrodes	65
Electrolyte ohmic heating during electrodeposition: The role of coupled kinetic-transport phenomena that lead to morphological and microstructural changes	64
Proving ligand structure-reactivity correlation on multinuclear copper electrocatalysts supported on carbon black for the oxygen reduction reaction	64
Influence of current density and inlet gas flow in the treatment of gaseous streams polluted with benzene by electro-absorption	64
Enhanced the zinc ion storage performance of PANI in ZnSO4 aqueous electrolyte by doping with sulfonated graphene quantum dots	63
A comparative study of the formation, and ion and solvent transport of polyaniline in protic liquid-based deep eutectic solvents and aqueous solutions using EQCM	62
Interface modification in solid-state lithium batteries based on garnet-type electrolytes with high ionic conductivity	62
Magnesium ion conducting biopolymer blend-based electrolyte for energy storage application: Electrochemical characteristics	62
Boosting lithium storage performance of Co-Sn double hydroxide nanocubes in-situ grown in mesoporous hollow carbon nanospheres	62
The influence of F− ion on the electrochemical behavior and coordination properties of uranium in LiCl-KCl molten salt	62
Lignin based carbon fiber fabrics with hybrid doping approach as self-standing electrodes for supercapacitors	61
Dual redox groups enable organic cathode material with a high capacity for aqueous zinc-organic batteries	61
Sub-nanometer thin TiO2-coating on carbon support for boosting oxygen reduction activity and durability of Pt nanoparticles	61
Employing the Cost-effective Composite Cathodes for Bio-Fenton facilitated degradation of Acid Red 114 integrated into Hydrogen Peroxide Synthesizing Microbial Fuel Cell	60
Facile preparation of electrodes of efficient electrolyte-supported solid oxide fuel cells using a direct assembly approach	60
An optimistic approach on flow rate and supporting electrolyte for enhancing the performance characteristics of Zn-Br2 redox flow battery	59
Improved electrocatalytic water oxidation with cobalt hydroxide nano-flakes supported on copper-modified nickel foam	59
FeNb11O29, anode material for high-power lithium-ion batteries: Pseudocapacitance and symmetrisation unravelled with advanced electrochemical and in situ/operando techniques	58
Bioinspired design of graphene-based N/O self-doped nanoporous carbon from carp scales for advanced Zn-ion hybrid supercapacitors	58
Stabilizing Sn anodes nanostructure: Structure optimization and interfacial engineering to boost lithium storage	58
Predicting optimal geometries of 3D-printed solid oxide electrochemical reactors	58
A high-performance solid sodium battery enabled by a thin Na-Ti3C2Tx composite anode	57
Effects of ethylenediamine tetrakis(ethoxylate-block-propoxylate) tetrol on tin electrodeposition	57
Power density vs ionic radii correlations in REBa2Cu3O6+ẟ (RE = La, Nd, Sm, Gd and Y) IT – SOFC potential cathodes	57
Unveiling the transport properties of protic ionic liquids: Lithium ion dynamics modulated by the anion fluorine reservoir	57
Ultrathin hierarchical porous Cu current collector fabricated by anodic oxidation in complexing agent system for stable anode-free Lithium metal batteries	56
Constructing nickel vanadium phosphide nanoarrays with highly active heterointerfaces for water oxidation in alkali media	56
High performance α-Fe2O3/rGO based prototype asymmetric coin cell supercapacitor in hybrid electrolyte	56
New electrochemical approach for assessing surface tension and its role in atmospheric particle growth	55
Multi-state joint estimation of series battery pack based on multi-model fusion	55
Stabilization of the cubic perovskite La0.8Pr0.2BaCo2-yO6-δ by introducing Co deficiency and its effect on thermal expansion, electrical conductivity and electrochemical properties	55
Enabling fast-charging of lithium-ion batteries through printed electrodes	54

Highly selective and efficient electrochemical nitrate removal via Ni-doped Cu(OH)2 nanowires promoting H* reaction	54
Future SI	54
Polyhedral oligomeric silsesquioxanes appended conjugated soluble polymers based on thieno[3,4-c]pyrrole-4,6‑dione acceptor unit	53
Cr-doped Ni-MOF nanosheet array structure anchored on nickel foam with specific orientation for high performance supercapacitors	53
Quantitative investigation of the influence of electrode morphology in the electro-chemo-mechanical response of li-ion batteries.	53
Editorial Board	53
Microwave‐induced defective PdFe/C nano‐electrocatalyst for highly efficient alkaline glycerol oxidation reactions	53
Functional gel cathode strategy to enhance the long-term cyclability of the lithium-polysulfide full cell	53
ISE pages	53
Electrochemical behaviour of copper(II) complexes containing 2-hydroxyphenones	52
Self-supporting porous S-doped graphitic carbon nitride as a multifunctional support of Au catalyst: Application to highly sensitive and selective determination of arsenic (III) in a wide range of pH	52
Application of botryosphaeran as a carbon black adherent on a glassy carbon electrode for the electrochemical determination of cyclobenzaprine	52
β-cyclodextrin functionalized graphitic carbon nitride as a promising electrocatalyst for the selective oxidation of Tetrahydrofurfuryl alcohol	52
Physical confinement versus adsorption driven reconstruction: The case of sulfate anion interaction with vicinal Cu(111) surfaces	52
Ultrasensitive and highly selective electrochemical determination of mesalazine in pharmaceutical, biological and environmental samples with the use of Co-Mordenite/Mesoporous Carbon modified Glassy C	51
In situ self-boosting catalytic synthesizing free-standing N, S rich transition metal sulfide/hierarchical CNF-CNT architectures enable high-performance lithium-sulfur batteries	51
Glycerol oxidation at Pd nanocatalysts obtained through spontaneous metal deposition on carbon substrates	50
Fluorine-doped nickel oxyhydroxide as a robust electrocatalyst for oxygen evolution reaction	50
Electrochemical recovery of phosphate from synthetic wastewater with enhanced salinity	50
Investigation of the inner microstructure of composite materials during their densification by scanning electron microscopy – LSM:YSZ electrode case study	50
Bifunctional urea surface-modified high voltage LiNi0.5Mn1.5O4 cathode for enhanced electrochemical performance	49
Evaluation of the formation and protectiveness of a lithium-based conversion layer using electrochemical noise	49
Facile design and synthesis of nickel foam@Mxene@NiCo layered hydroxides core-sheath nanostructure for high mass-loading of supercapacitors	49
Preparation of self-supported Mo-doped hierarchical porous Ni–P toward highly efficient hydrogen evolution catalysis	49
Construction of unit structures with Sn-O reversible coordination bonds for high-performance lithium storage	49
High-efficiency water splitting catalyzed by NiMoO4 nanorod arrays decorated with vacancy defect-rich NiTex and MoOy layers	49
Stable interface between anode materials and Li1.3Al0.3Ti1.7(PO4)3-based solid-state electrolyte facilitated by graphene coating	49
Decoration of sea-urchin-like NiCoP coated with WSe2@ZnS as an advanced electrode material for hybrid supercapacitors	49
High areal capacitance and enhanced cycling stability of binder-free, pristine polyaniline supercapacitor using hydroquinone as a redox additive	49
Uniform Na3V2(PO4)2O2F microcubes enhanced by ionic liquid-modified multi-walled carbon nanotubes as a superior cathode for Sodium-Ion Batteries	49
Enhancement of direct electron transfer by aromatic thiol modification with truncated d-fructose dehydrogenase	49
Alkali metal cations at work: Enhancing CO2 electroreduction to CO on ZnO nanorods	48
Application of impressed current cathodic protection on chain structure: An experimental study combined with COMSOL simulation	48
Synthesis of new mixed metal oxide RuNi2O4 phase decorated on reduced graphene oxide for supercapacitor applications	48
Replacing oxygen evolution reaction in water splitting process by electrochemical energy-efficient production of high-added value chemicals with co-generation of green hydrogen	48
Lithium modulated spinel high entropy oxide anode of LIBs through microwave solvothermal method	48
Structural modulation of covalent organic frameworks based on redox active center of π-conjugated amine unit for enhanced electrochromic properties	48
Mechanism of the hydrazine hydrate electrooxidation reaction on metallic Ni electrodes in alkaline media as revealed by electrochemical methods, online DEMS and ex situ XPS	48
Scalable ammonia synthesis on the modified crystal structure of Cu3PS4 electrocatalyst	48
Practical considerations for using redox probes in electrochemical sensor characterization	48
Accelerated bubble growth and departure by bioinspired gradient anode in microfluidic fuel cells	48
Hetero-structured NiS2/CoS2 nanospheres embedded on N/S co-doped carbon nanocages with ultra-thin nanosheets for hybrid supercapacitors	47
Ultra-thin nanosheets of Ti3C2Tx MXene/MoSe2 nanocomposite electrode for asymmetric supercapacitor and electrocatalytic water splitting	47
Parameter identification and sensitivity analysis of lithium-ion battery via whale optimization algorithm	47
Ni-MOF-based electrodes: A promising strategy for efficient overall water splitting	47
Ba-doped LaCoO3 perovskite as novel bifunctional electrocatalyst for zinc–air batteries	46
Outstanding oxygen evolution reaction properties released at the interface of NiMoO4 and FeNi layer double hydroxide heterostructures	46
A graphene-like N-annulated perylene diimide dimer compound for highly efficient electrochemiluminescence	46
Synergistically coupling of trimetallic sulfides on Ni foam as porous self-supported electrodes for alkaline water splitting	46
Tailoring structural and electrochemical properties in Sr2+ incorporated nanostructured BiFeO3 for enhanced asymmetric solidstate supercapacitor	46
In situ constructed multilayer graphene structure enabling improved supercapacitive charge storage	46
Energy-saving recovery of lead from waste lead paste via in-situ hydrometallurgical reduction and electrochemical mechanism	46
Semiconductors-based Z-scheme materials for photoelectrochemical water splitting: A review	46
Ferrocenyl aniline modified electrode for the electrochemical synthesis of 2-(4-methoxyphenyl)-1H-benzo[d]imidazole	46
Why does Pd-catalyzed electrochemical hydrodechlorination proceed much slower than hydrodechlorination using hydrogen gas?	46
Influence of an ambient medium of tetragonal solid electrolyte Li7La3Zr2O12 on the structural stability on high operating voltages of Ni-rich cathode material for lithium-ion batteries	46
Efficient and highly accurate calculation of chronoamperometric currents for the	46
Wearable sensors deriving from cationic-induced 2D-2D co-assembled films for nutrient monitoring	45
Editorial Board	45
3D-printed polyacrylamide-based hydrogel polymer electrolytes for flexible zinc-ion battery	45
A novel sea urchin like nanostructure as a bifunctional catalyst for overall water splitting	45
Ceria and gold co-decorated porous MoS2@graphene nanocomposite electrochemical electrode integrated with smartphone-controlled microstation for simultaneous dual metal ions detection	45
A doped cobaltite for enhanced SOFCs fed with dry biogas	45
Future SI	45
Electrochemical dealloying in a magnetic field – Tapping the potential for catalyst and material design	45
2,2′-bipyridine palladium (II) complexes derived N-doped carbon encapsulated palladium nanoparticles for formic acid oxidation	44
Surfactant-assisted RGO limited spherical FeS with superior stability and high capacity as an anode for lithium-ion batteries	44
Future SI	44
Voltage loss and capacity fade reduction in vanadium redox battery by electrolyte flow control	44
Three-dimensional hierarchical flowers-like cobalt-nickel sulfide constructed on graphitic carbon nitride: Bifunctional non-noble electrocatalyst for overall water splitting	44
Manipulating the microstructure of Na2TiV(PO4)3 for aqueous Na ion storage	44
Recent SI	44
PbO nanoparticles anchored on reduced graphene oxide for enhanced cycle life of lead-carbon battery	44
ISE pages	44
Cobalt-, iron- and nitrogen-containing ordered mesoporous carbon-based catalysts for anion-exchange membrane fuel cell cathode	44
Cathodic pre-polarization studies on the carbon felt/KOH interface: An efficient metal-free electrocatalyst for hydrogen generation	44
Anodic water oxidation to H2O2 on Fe-doped ZnO for electro-Fenton wastewater purification	44
Binder-free 3D flower-like alkali doped- SnS2 electrodes for high-performance supercapacitors	44
Localized corrosion behavior studies by SVET of 1010 steel in different concentrations of sodium chloride containing [m-2HEA][Ol] ionic liquid as corrosion inhibitor	44
Surface or bulk? Real-time manganese dissolution detection in a lithium-ion cathode	44

Improvement of thermal and water management of air-cooled polymer electrolyte membrane fuel cells by adding porous media into the cathode gas channel	44
A novel electrochemiluminescence aptasensor using Ti3C2@AuNRs-Ru for ultra-sensitive detection of T-2 toxin	44
Determination of biogenic amines in tomato by ion-pair chromatography coupled to an amine-selective potentiometric detector	44
Nanotubes-nanosheets (1D/2D) heterostructured bifunctional electrocatalysts for overall water splitting	43
Recovery of lithium by pseudocapacitive electrodes in capacitive deionization	43
Hierarchically porous carbon nanofibers loaded with Cu2O and Cu nanoparticles modified separator with strong adsorption and excellent catalysis of lithium polysulfide for lithium-sulfur batteries	43
Monodisperse core-shell Li4Ti5O12@C submicron particles as high-rate anode materials for lithium-ion batteries	43
Inhibitive effect of sodium molybdate on corrosion of AZ31 magnesium alloy in chloride solutions	43
Towards selective tetracycline recognition in wastewater based on gold nanovoids@aptamer sensing	43
Electro-chemo-mechanical finite-element model of single-crystal and polycrystalline NMC cathode particles embedded in an argyrodite solid electrolyte	43
One-step synthesis of graphene-wrapped ZnS-MoS2@carbon composites as an ultrastable lithium storage anode material	43
Preparation of Fe-MOF/CuO/C3N4 as Novel Assemblies Nanocomposites for High Performance Asymmetric Supercapacitors	43
Comparative electrochemical study of N-(4-aminophenyl) and N-(4-hydroxyphenyl)benzenesulfonamide derivatives	42
Suppressing oxygen vacancies on the surface of Li-rich material as a high-energy cathode via high oxygen affinity Ca0.95Bi0.05MnO3 coating	42
MOF-derived NiS2@carbon microspheres wrapped with carbon nanotubes for high cycle performance supercapacitors	42
Decoupling oxygen and water transport dynamics in polymer electrolyte membrane fuel cells through frequency response methods based on partial pressure perturbations	42
Near-infrared light harvesting of upconverting Y2O3:Er3+ nanoparticles and their photovoltaic application	42
Electronic interactions and stability issues at the copper-graphene interface in air and in alkaline solution under electrochemical control	42
Construction of porous and free-standing film electrodes composed of MXene, carbon nanocoils and PEDOT:PSS for high-performance flexible supercapacitors	42
Ruthenium electrodeposition from non-aqueous electrolytes containing divalent ions	42
Hydrogen permeation due to uniform, pitting, and crevice corrosion of carbon steel in concrete simulated media	42
Enhanced electrochemical performance of 3D-printed electrodes via blue-laser irradiation and (electro)chemical treatment	42
Revolutionizing hydrogen production with LSGM-based solid oxide electrolysis cells: An innovative approach by sonic spray	42
Exploring the hydrogen evolution catalytic activity of the orthorhombic and hexagonal borophene as the hydrogen storage material	42
Co-Co LDH-derived CoSe2 anchored on N-doped carbon nanospheres as high-performance anodes for sodium-ion batteries	41
Quaternary ammonium-based levelers for high-speed microvia filling via Cu electrodeposition	41
A new angle to control concentration profiles at electroactive biofilm interfaces: Investigating a microfluidic perpendicular flow approach	41
A highly sensitive electrochemical immunosensor based on PET/GO/pPd/MAb nanofiber-particles for metolachlor detection	41
Electrochemical redox of Li2S–CaS and –CaX2 (X = Cl, Br, and I) cathode materials for all-solid-state lithium-sulfur batteries	41
Future SI	41
Ultrafast self-assembly Fe2O3 nanoparticles confined in carbon layers toward robust heterogeneous electro-Fenton reaction	41
Na3MnTi(PO4)3/C composite as an anode for Na-ion batteries with superior rate performance and long-term span	41
Carbon nanotube enables high-performance thiophene-containing organic anodes for lithium ion batteries	41
Deconvolution of electrochemical impedance spectroscopy data using the deep-neural-network-enhanced distribution of relaxation times	41
Physics-based simulation of electrochemical impedance spectroscopy of complex electrode microstructures using smoothed boundary method	41
Selective elimination of the reactive groups of porous biochar 3D host for stable lithium anodes	40
Recent SI	40
Electrochemical properties of double molybdate LiSm(MoO4)2 ceramics with ultra-low sintering temperature	40
Metal-organic frameworks derived in situ carbon-doped hollow nickel-cobalt phosphate microspheres for high performance zinc-ion hybrid supercapacitors	40
Editorial Board	40
ISE pages	40
Future SI	40
Influence of acidic type on nanostructures and electrochemical performance of polyaniline for flexible supercapacitors and improved performance based on 3D honeycomb-like nanosheet by doping HPF6 acid	40
Free radical formation evidence from Nimorazole electrochemical reduction in aqueous media	40
A molecular keypad lock with 3-output signals built on stimulus-responsive polymer film electrodes containing diallyl viologen	40
ISE pages	40
Future SI	40
Label-free detection of glypican-3 using reduced graphene oxide /polyetherimide/gold nanoparticles enhanced aptamer specific sensing interface on light-addressable potentiometric sensor	40
Recent SI	39
Editorial Board	39
Electrodilatometric analysis under applied force: A powerful tool for electrode investigation	39
Editorial Board	39
Editorial Board	39
Textural and electrochemical analysis of galvanostatically fabricated nano Mn0.2-0.4xFe0.5-0.7xSx@rGO/Cu(200) composite films for hybrid supercapacitor electrodes	39
Future SI	39
Future SI	39
A carbon cloth interlayer immobilizes carbon nanotube-supported ternary chalcogen compounds in novel lithium-chalcogenide batteries	39
ISE pages	39
Efficient recovery and utilization of electrolytic manganese anode mud- preparation of high-performance Li1.2Ni0.2Mn0.6O2 cathode material for lithium-ion batteries	39
ISE pages	39
Recent SI	39
Editorial Board	39
ISE pages	39
Unlocking efficiency in oxygen reduction reaction: Synergistic edge dopants of nitrogen and boron in carbon nano onions	39
Recent SI	39
Effect of particle microstructure and the role of proton on the lithium insertion properties of HTiNbO5 electrode material	39
ISE pages	38
Future SI	38
Future SI	38
Editorial Board	38
Controllable preparation of N-doped Ni3S2 nanocubes@N-doped graphene-like carbon layers for highly active electrocatalytic overall water splitting	38
Future SI	38
Future SI	38
A 3D electropolymerized thin film based on an isoporphyrin and on a pyridine end-decorated molybdenum(II) halide cluster: Photoelectrochemical and impedance properties	38
Editorial Board	38
Bicomponent composite electrochemical sensors for sustained monitoring of hydrogen peroxide in breast cancer cells	38
Dual carbon enables highly reversible alloying/dealloying behavior of ultra-small Bi nanoparticles for ultra-stable Li storage	38
MWCNT buckypaper disc films as alternative to the drop casting method to modify electrode surfaces	38
Editorial Board	38
Future SI	38
Fe, N-codoped carbon derived from different ligands for oxygen reduction reaction in air-cathode microbial fuel cells: Performance comparison and the associated mechanism	38
Influence of structure on the electrooxidation rate of six C-4 alcohols	38
ISE pages	38
Structural evolution of Na-rich spinel oxides involving anionic redox reaction for Na-ion batteries	38
Trace metals from microbial growth media form in situ electro-catalysts	37
Future SI	37
Exploration of high performance and highly flexible supercapacitor configuration with MXene/1T-MoS2 composite paper electrode	37
Recent SI	37
Editorial Board	37
Future SI	37
Tuning the potential drop at graphene/protic ionic liquid interface by molecular structure engineering	37
Editorial Board	37
Stabilize garnet/electrode interface via low-melting polymer layer in solid-state lithium metal battery	37
ISE pages	37
Electrochemical characterization and degradation analysis of a flat-chip solid oxide fuel cell fed by ambient temperature inlet gas	36