Biomedical Engineering-Biomedizinische Technik

Papers
(The median citation count of Biomedical Engineering-Biomedizinische Technik is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)
ArticleCitations
Frontmatter42
Frontmatter18
STF-Net: sparsification transformer coding guided network for subcortical brain structure segmentation16
Impact of the new European medical device regulation: a two-year comparison14
Automatic sleep scoring with LSTM networks: impact of time granularity and input signals14
Automated detection of clinical depression based on convolution neural network model13
Endoscopic confocal laser-microscopy for the intraoperative nerve recognition: is it feasible?13
06-1745-B2313
Hand gesture recognition with deep residual network using Semg signal12
In vitro thrombogenicity evaluation of rotary blood pumps by thromboelastometry11
Towards a versatile mental workload modeling using neurometric indices11
06-1145-B610
Non-woven textiles for medical implants: mechanical performances improvement9
05-0915-A99
Frontmatter9
07-1115-C119
Noise reduction and QRS detection in ECG signal using EEMD with modified sigmoid thresholding8
A multimodal deep learning-based algorithm for specific fetal heart rate events detection8
Analysis of objective quality metrics in computed tomography images affected by metal artifacts8
Frontmatter7
Assessment of drug delivery devices working at microflow rates7
A software tool for fabricating phantoms mimicking human tissues with designated dielectric properties and frequency7
Abstracts of the 2025 Joint Annual Conference of the Austrian (ÖGBMT), German (VDE DGBMT) and Swiss (SSBE) Societies for Biomedical Engineering7
DeepCOVIDNet-CXR: deep learning strategies for identifying COVID-19 on enhanced chest X-rays7
Open structure magnetic particle imaging by nonlinear back projection tomography reconstruction7
Parameter-based patient-specific restoration of physiological knee morphology for optimized implant design and matching7
Frontmatter6
Stratification of risk of atherosclerotic plaque using Hu’s moment invariants of segmented ultrasonic images6
Does helical plating for proximal humeral shaft fractures benefit bone healing? – an in silico analysis in fracture healing6
In-line measurements of the physical and thermodynamic properties of single and multicomponent liquids6
Development of audio-guided deep breathing and auditory Go/No-Go task on evaluating its impact on the wellness of young adults: a pilot study5
Assessing standing balance with MOTI: a validation study5
07-1115-C105
Frontmatter5
Heart sound classification based on equal scale frequency cepstral coefficients and deep learning5
Breaking the silence: empowering the mute-deaf community through automatic sign language decoding5
Abstracts of the 58th Annual Meeting of the German Society of Biomedical Engineering, 18 – 20 September 2024, Stuttgart5
05-0915-A85
Deep learning classification of EEG-based BCI monitoring of the attempted arm and hand movements5
05-1700-P104
Frontmatter4
Image segmentation of mouse eye in vivo with optical coherence tomography based on Bayesian classification4
Change of publication model for B iomedical Engineering/Biomedizinische Technik4
Modeling the compliance of the human eye with elastic membranes based on a bionic approach4
Effect of non-return valves on the time-of-arrival of new medication in a patient after syringe exchange in an infusion set-up4
Straight and helical plating with locking plates for proximal humeral shaft fractures – a biomechanical comparison under physiological load conditions4
06-1745-B184
Structural EEG signal analysis for sleep apnea classification3
Frontmatter3
Assessment of brain tumor detection techniques and recommendation of neural network3
Classification of anemic condition based on photoplethysmography signals and clinical dataset3
Evaluation method of ex vivo porcine liver reduced scattering coefficient during microwave ablation based on temperature3
Detection of driver drowsiness level using a hybrid learning model based on ECG signals3
07-0900-C63
A new approach towards extracorporeal gas exchange and first in vitro results3
05-1700-P13
Medical flow and dosing measurement metrology in drug delivery3
An exploratory study of pilot EEG features during the climb and descent phases of flight3
A machine learning approach to identify hand actions from single-channel sEMG signals3
Computer aided detection of tuberculosis using two classifiers3
Active cell capturing for organ-on-a-chip systems: a review3
Machine learning prediction of effective radiation doses in various computed tomography applications: a virtual human phantom study2
MEMS-based narrow-bandwidth magnetic field sensors: preliminary assessment of prototypes regarding coercivity, remanence, and sensitivity2
An analysis of initial force and moment delivery of different aligner materials2
Ergonomic RFID tag placement on surgical instruments – a preliminary user study2
07-1115-C152
Crowdsourcing image segmentation for deep learning: integrated platform for citizen science, paid microtask, and gamification2
Actuators and transmission mechanisms in rehabilitation lower limb exoskeletons: a review2
Voice pathology detection and classification from speech signals and EGG signals based on a multimodal fusion method2
Effect of non-thermal plasma treatment and resin cements on the bond strength of zirconia ceramics with different yttria concentrations2
Abstracts of the 2022 Joint Annual Conference of the Austrian (ÖGBMT), German (VDE DGBMT) and Swiss (SSBE) Societies for Biomedical Engineering, including the 14th Vienna International Workshop on Fun2
A combined impedance compensation strategy applied to external automatic defibrillators2
06-1745-B252
06-1745-B212
Sparse-view CT reconstruction based on group-based sparse representation using weighted guided image filtering2
Detection and analysis of fatigue flight features using the fusion of pilot motion behavior and EEG information2
Designing and in vitro testing of a novel patient-specific total knee prosthesis using the probabilistic approach2
Novel low-cost approach to build large-scale flexible sensors for spatially distributed ground reaction force measurements2
A deep learning network for Gleason grading of prostate biopsies using EfficientNet2
06-1500-B122
Optimized Schlieren imaging for real-time visualization of high-intensity focused ultrasound waves2
Therapeutic maps for a sensor-based evaluation of deep brain stimulation programming2
Evaluation of the RF depositions at 3T in routine clinical scans with respect to the SAR safety to improve efficiency of MRI utilization1
Towards fully automated detection of epileptic disorders: a novel CNSVM approach with Clough–Tocher interpolation1
Development of a microfluidic electroosmosis pump on a chip for steady and continuous fluid delivery1
De- and recellularized urethral reconstruction with autologous buccal mucosal cells implanted in an ovine animal model1
Influences of smart glasses on postural control under single- and dual-task conditions for ergonomic risk assessment1
05-1500-A111
Investigation of the impact of electromagnetic fields emitted close to the head by smart glasses1
Frontmatter1
Active fault tolerant deep brain stimulator for epilepsy using deep neural network1
Biomechanical testing of osteosynthetic locking plates for proximal humeral shaft fractures – a systematic literature review1
CT-based evaluation of tissue expansion in cryoablation of ex vivo kidney1
06-1500-B171
AML leukocyte classification method for small samples based on ACGAN1
Automatic landmark identification for surgical 3d-navigation – A proposed method for marker-free dental surgical navigation systems1
05-1500-A151
Optical bone densitometry insensitive to skin thickness1
Unexpected dosing errors due to air bubbles in infusion lines with and without air filters1
Frontmatter1
Surface treatment of PET multifilament textile for biomedical applications: roughness modification and fibroblast viability assessment1
Design and optimization of a high-definition transcranial electrical stimulation device with envelope wave1
A new approach for heart disease detection using Motif transform-based CWT’s time-frequency images with DenseNet deep transfer learning methods1
05-1700-P21
Design and analysis of metamaterial superstrate and FSS reflector loaded UWB antenna for the detection and localization of breast tumors1
A type-2 fuzzy inference-based approach enables walking speed estimation that adapts to inter-individual gait patterns1
Prediction of remaining surgery duration based on machine learning methods and laparoscopic annotation data1
06-1500-B151
07-1115-C121
Variational mode decomposition and binary grey wolf optimization-based automated epilepsy seizure classification framework1
Frontmatter1
05-1500-A141
Empirical analysis on retinal segmentation using PSO-based thresholding in diabetic retinopathy grading1
Comparative evaluation of volumetry estimation from plain and contrast enhanced computed tomography liver images1
Frontmatter1
Biomechanical comparison of different prosthetic materials and posterior implant angles in all-on-4 treatment concept by three-dimensional finite element analysis1
Metrology in health: challenges and solutions in infusion therapy and diagnostics1
How does research output and impact in medical informatics vary among EU member states? – A bibliometric analysis1
06-1145-B81
Frontmatter1
Dynamic loading leakage test of dental abutment/implant connections based upon a novel implant system with an abutment switch feature: an in vitro study1
Research frontiers of electroporation-based applications in cancer treatment: a bibliometric analysis1
07-1115-C131
Concurrent validity and reliability of a smartphone-based application for the head repositioning and cervical range of motion1
A low power respiratory sound diagnosis processing unit based on LSTM for wearable health monitoring1
Frontmatter1
Validation and comparison of three different methods for automated identification of distal femoral landmarks in 3D0
Multi-stage image pyramid network for coarse-to-fine segmentation of temporomandibular joint in CBCT images0
Analysis of pilots’ EEG map in take-off and landing tasks0
Hyperspectral imaging enables the differentiation of differentially inflated and perfused pulmonary tissue: a proof-of-concept study in pulmonary lobectomies for intersegmental plane mapping0
Effects of weight gaining to lower limb joint moments: a gender-specific sit-to-stand analysis0
Holographic PIV/PTV for nano flow rates–A study in the 70 to 200 nL/min range0
A diagnostic method for cardiomyopathy based on multimodal data0
Instrumented treadmill for run biomechanics analysis: a comparative study0
Vein segmentation and visualization of upper and lower extremities using convolution neural network0
Measurement of internal diameters of capillaries and glass syringes using gravimetric and optical methods for microflow applications0
Frontmatter0
05-0915-A60
05-1715-P80
06-1745-B220
Hyperspectral imaging-based cutaneous wound classification using neighbourhood extraction 3D convolutional neural network0
05-1700-P60
Simultaneous validation of wearable motion capture system for lower body applications: over single plane range of motion (ROM) and gait activities0
05-1500-A170
07-1115-C140
Deep neural network to differentiate internet gaming disorder from healthy controls during stop-signal task: a multichannel near-infrared spectroscopy study0
05-1500-A120
A review: strategies to reduce infection in tantalum and its derivative applied to implants0
07-0900-C10
Modular 3D printable orthodontic measuring apparatus for force and torque measurements of thermoplastic/removable appliances0
Analysis of EEG brain connectivity of children with ADHD using graph theory and directional information transfer0
Modulation of neo-endothelialization of vascular graft materials by silk fibroin0
Perception of defecation intent: applied methods and technology trends0
07-0900-C70
Hydrogel promotes bone regeneration through various mechanisms: a review0
05-0915-A70
06-1145-B50
A method to classify bone marrow cells with rejected option0
Optimal assist strategy exploration for a direct assist device under stress‒strain dynamics0
Design and evaluation of powered lumbar exoskeleton based on human biomechanics0
Correlation of electrogastrography and bioelectric impedance techniques for the gastric motility assessment0
Effects of a full-body electrostimulation garment application in a cohort of subjects with cerebral palsy, multiple sclerosis, and stroke on upper motor neuron syndrome symptoms0
06-1145-B30
07-1345-C160
05-0915-A30
07-0900-C80
Comparison of the regulatory requirements for custom-made medical devices using 3D printing in Europe, the United States, and Australia0
Reliability and validity varies among smartphone apps for range of motion measurements of the lower extremity: a systematic review0
Biomechanical effects of inclined implant shoulder design in all-on-four treatment concept: a three-dimensional finite element analysis0
Meta-analysis of animal experiments on osteogenic effects of trace element doped calcium phosphate ceramic/PLGA composites0
Probabilistic hierarchical clustering based identification and segmentation of brain tumors in magnetic resonance imaging0
Recognition analysis of spiral and straight-line drawings in tremor assessment0
Anatomic variability of the human femur and its implications for the use of artificial bones in biomechanical testing0
Hybrid optimization assisted channel selection of EEG for deep learning model-based classification of motor imagery task0
Smartphone-based intelligent system with a wearable throat microphone for real-time screening of swallowing ability0
Frontmatter0
Correlation between Periotest value and implant stability quotient: a systematic review0
Estimation of heart rate and respiratory rate by monitoring cardiopulmonary signals with flexible sensor0
A portable household detection system based on the combination of bidirectional LSTM and residual block for automatical arrhythmia detection0
06-1500-B140
Stacked machine learning models to classify atrial disorders based on clinical ECG features: a method to predict early atrial fibrillation0
06-1500-B130
Fetal phonocardiogram signals denoising using improved complete ensemble (EMD) with adaptive noise and optimal thresholding of wavelet coefficients0
A novel deep learning approach for sickle cell anemia detection in human RBCs using an improved wrapper-based feature selection technique in microscopic blood smear images0
Machine learning based endothelial cell image analysis of patients undergoing descemet membrane endothelial keratoplasty surgery0
Hybrid method for noise rejection from breath sound using transient artifact reduction algorithm and spectral subtraction0
An integrated and automated testing approach on Inception Restnet-V3 based on convolutional neural network for leukocytes image classification0
06-1500-B160
Machine learning based hybrid anomaly detection technique for automatic diagnosis of cardiovascular diseases using cardiac sympathetic nerve activity and electrocardiogram0
06-1745-B190
Biomechanical analysis of different fixed dental restorations on short implants: a finite element study0
06-1745-B240
The intensity of subacute local biological effects after the implantation of ALBO-OS dental material based on hydroxyapatite and poly(lactide-co-glycolide): in vivo evaluation in rats0
A new method for vital sign detection using FMCW radar based on random body motion cancellation0
Concept and development of a telemedical supervision system for anesthesiology in operating rooms using the interoperable communication standard ISO/IEEE 11073 SDC0
The investigation on EEG characteristic parameters change when executing cognitive ability tasks under centrifuge G acceleration0
High-performance breast cancer diagnosis method using hybrid feature selection method0
05-1500-A160
A multi-chamber soft robot for transesophageal echocardiography: continuous kinematic matching control of soft medical robots0
07-0900-C90
Frontmatter0
Caries-segnet: multi-scale cascaded hybrid spatial channel attention encoder-decoder for semantic segmentation of dental caries0
Wear investigation of implant-supported upper removable prothesis with electroplated gold or PEKK secondary crowns0
Integration of neuromuscular control for multidirectional horizontal planar reaching movements in a portable upper limb exoskeleton for enhanced stroke rehabilitation0
07-1345-C180
EEG-based driver states discrimination by noise fraction analysis and novel clustering algorithm0
07-0900-C50
07-0900-C40
Evaluation of mesoporous polyaniline for glucose sensor under different pH electrolyte conditions0
07-0900-C30
Smart piezoelectric biomaterials for tissue engineering and regenerative medicine: a review0
05-1700-P40
MedShapeNet – a large-scale dataset of 3D medical shapes for computer vision0
Corrigendum to: Developing a novel resorptive hydroxyapatite-based bone substitute for over-critical size defect reconstruction: physicochemical and biological characterization and proof of concept in0
Atherosclerosis plaque tissue classification using self-attention-based conditional variational auto-encoder generative adversarial network using OCT plaque image0
Epileptic EEG patterns recognition through machine learning techniques and relevant time–frequency features0
Computational models of bone fracture healing and applications: a review0
Stacking classifier to improve the classification of shoulder motion in transhumeral amputees0
Nano-material utilization in stem cells for regenerative medicine0
Frontmatter0
Safe design of surgical robots – a systematic approach to comprehensive hazard identification0
Region-wise severity analysis of diabetic plantar foot thermograms0
Chamber design and intensity-modulated ultraviolet-C LEDs for advanced pulsed photonic disinfection0
Biomechanical comparison of three fixation strategies for radial head fractures: a biomechanical study0
Mechanical response of different frameworks for maxillary all-on-four implant-supported fixed dental prosthesis: 3D finite element analysis0
A numerical study of palatal snoring0
Highly sensitive temperature sensor using one-dimensional Bragg Reflector for biomedical applications0
A computational 3D analysis for assessing bone remodeling following total hip arthroplasty: a longitudinal study spanning six years0
A comparative study of the spectrogram, scalogram, melspectrogram and gammatonegram time-frequency representations for the classification of lung sounds using the ICBHI database based on CNNs0
05-1700-P70
Gesture recognition from surface electromyography signals based on the SE-DenseNet network0
Classification of breast cancer with deep learning from noisy images using wavelet transform0
Computer-aided diagnosis system for retinal disorder classification using optical coherence tomography images0
Improving the cleaning quality of tube lumen instruments by imaging analysis and deep learning techniques0
Revisiting SFA stent technology: an updated overview on mechanical stent performance0
The impact of right ventricular hemodynamics on the performance of a left ventricular assist device in a numerical simulation model0
Real-time classification of movement patterns of tremor patients0
06-1145-B20
A new method for successful indirect bonding in relation to bond strength0
Biomagnetic signals recorded during transcranial magnetic stimulation (TMS)-evoked peripheral muscular activity0
The impact of physiological load and support conditions on axial implant system testing of locking plates for femoral shaft fractures – a biomechanical analysis0
05-1700-P90
06-1145-B10
Frontal-occipital network alterations while viewing 2D & 3D movies: a source-level EEG and graph theory approach0
06-1500-B110
Surface characteristics and wettability of novel gingival col designed 3-D printed dental sectional matrices0
Towards technically controlled bioreactor maturation of tissue-engineered heart valves0
Layer recurrent neural network-based diagnosis of Parkinson’s disease using voice features0
06-1745-B200
05-0915-A40
0.18009805679321