Engineering Fracture Mechanics

Article	Citations
Boussinesq indentation of a cracked half space: a theoretical modelling of impact induced compressive fracture	229
Unconservatism of ANSI AIAA S081B for damage tolerance life analysis of COPVs	206
Singularity analysis of linear hardening V-notch by asymptotic expansion coupled BEM	153
Use of modified Madou–Leblond model to predict crack initiation in low alloy steel specimens with different stress states	151
OFDR distributed fiber optic blasting fracture monitoring considering fiber interfacial slip	145
Dynamic mechanical behavior and failure evolution of water-bearing grotto sandstone under cyclic loading and unloading	128
Brittle fracture prediction using a degradation tensor-based phase field model	115
Capturing fracture initiation and crack propagation of car windshields	110
Corrosion fatigue crack growth behavior of a structurally gradient steel for high-speed railway axles	105
An experimental and numerical study on the translaminar fracture of cross-ply non-crimp fabric composites	83
Fatigue cracking propagation behavior of 10CrNi3MoV steel mismatched welded joints at sub-temperature	83
Fracture and fatigue behavior of sinusoidal interface adhesive joints using a modified double cantilever beam geometry	80
Molecular investigation on temperature-dependent mechanical properties of PMMA/CNT nanocomposite	78
Crowbar Loading-A New Test Technique to Characterize Interfacial Delamination	73
Strain monitoring and depth estimation for multiple surface cracks in steel structures using smart CFRP embedded with distributed fiber sensors	73
Fracturing characteristics of unconfined rock plate subjected to point-plate loading	72
Analysis of progressive failure and structural size effect in fiber-reinforced concrete composite with an improved peridynamic model	71
Fatigue integrity analysis of a howitzer cannon by using a fracture mechanics approach	67
Corrigendum to “Investigation on the static and cyclic anisotropic mechanical behavior of polychloroprene rubber (CR) reinforced with tungsten nano-particles” [Eng. Fract. Mech. 235 (2020) 107183]	66
An enhanced lattice beam element model for the numerical simulation of rate-dependent self-healing in cementitious materials	65
An innovative and sustainable methodology for fatigue characterization and design	64
Fracture behavior of aluminosilicate glass under ballistic impact: An experimental and peridynamic study	63
Roadway fracture mechanism investigation subjected to static and blast loading under different lateral pressure coefficients	63
Fatigue crack growth behavior of 42CrMo high-strength steel with tempered sorbite/bainite microstructures: Roles of grain and constituent in microstructures	62
Fatigue characteristics and fracture behaviour of sandstone under discontinuous multilevel constant-amplitude fatigue disturbance	61

Fracture mechanical properties and interfacial characteristics of engineered cementitious composites containing coarse aggregate	60
A dual-horizon peridynamic model for Reissner–Mindlin plates with arbitrary horizon sizes and shapes	60
Modeling multiple crack propagation in the material point method by J-integral methods accounting for other cracks intersecting the J contour	60
Random anisotropic initial damage tensor	59
Numerical modelling of brittle fracture using lattice particle method with applications to fluid structure interaction problems via SPH coupling	59
Tensile stress–strain behaviors of cement mortar at low temperatures: Tests, data-driven analysis and application in mesoscale simulation	59
Quantitative analysis of the effect of acidification on in-situ residual fracture openings in laboratory fracturing simulation tests	58
Fracture failure analysis of plastic fiber based on thermodynamic strength theory and experiment	57
Analysis of mechanical properties and behaviors in HTS Roebel cable strand under tensile load	55
Application of unified constraint-dependent J-R curve in leak-before-break assessment of dissimilar metal welded joints	55
Finite element tensile fracture analysis of α-uranium based on 3D crystal plastic model and cohesive element	54
Atomistic insights into the debonding of Epoxy–Concrete interface with water presence	54
Effect of geometrical features of pores on the mechanical properties and fracture of ceramic materials	54
Augmenting the fracture toughness and structural health monitoring capabilities in Kevlar/epoxy composites using carbon nanotubes	54
Large deformation and crack propagation analyses of hydrogel by peridynamics	54
Quantifying 3D crack propagation in nodular graphite cast iron using advanced digital volume correlation and X-ray computed tomography	53
Accurate measurement of mechanical properties of soft materials by introducing transition layers into test samples	52
Plasticization-assisted slow crack growth modeling of high-density polyethylene	52
Effect of loading waveform on the blasting crack propagation mechanism in single-hole and dual-hole blasting	52
LCF behavior of 2024AA under uni- and biaxial loading taking into account creep pre-deformation	52
Stiffness/constraint effects in analytical flaw assessment. A technical note	51
An extended average strain energy density criterion for predicting crack propagation of mixed mode I-II fracture in concrete	51
Determination of the plastic J integral of ductile material using the XFEM with only Heaviside function and variable-node elements	50
A fatigue reliability assessment method for crack propagation of turnout rail considering uncertainty	50
An investigation into the influence of variable amplitude creep-fatigue loading on plasticity-induced crack closure	49
Quantifying effect of overload-induced residual stress behind crack tip on fatigue crack growth	49
A unified estimation method for gear fatigue P-S-N curves and fatigue limits based on ensemble learning and data augmentation	49
Improvement of low-cycle fatigue properties in electron beam powder bed fusion processed Ti-6Al-4V alloy by laser shock peening	49
A comparative study of nil-SIF-based and initial fracture toughness-based criteria for prediction of mode-I crack propagation in concrete at low temperatures	49
Meso-fracture model of ultra-high-performance fiber-reinforced geopolymer concrete pertinent to aggregate gradation and fiber spacing	48
Near-threshold fatigue crack propagation in a Ni-based single crystal superalloy affected by crystallographic anisotropy	48
Strength, energy consumption, particle size distribution and fracture toughness in rock fragmentation under dynamic loading	48
In-situ investigation on tensile deformation and fracture behaviors of inhomogeneous microstructure during laser repair of Ti-6Al-4 V titanium alloy	48
Full-time domain rust expansion investigation and visual evaluation of reinforced concrete under synergistic protection	47
Dynamic response of concrete materials at high strain rates: experimental and numerical studies	47
Stress, Strain, or Energy? which one is superior predictor of fatigue life in notched Components? a novel Machine Learning-Based framework	46
Experimental characterization and phase-field modeling of anisotropic brittle fracture in silicon	46
Thermomechanical analysis of ultrasonically welded copper-magnesium sheets with Ni and Zn interlayers	45
Creep deformation and continuous damage mechanics parameters prediction based on a meta-learning framework	44
Modified Williams’ crack tip solution including crack face pressure	44
On distribution softening in the yielding of porous materials	44
Temperature-dependent fracture characterization of methacrylate adhesive-bonded glass fibre-reinforced reactive thermoplastic composites	44
A physics-informed GNN-LSTM framework for prediction of microvoid growth in heterogeneous polycrystals	44
Effect of joint density on mechanical behavior of rock mass: Insight from 3D printing tests and DEM simulation	43
An experimental fracture mechanics study of the combined effect of hydrogen embrittlement and loss of constraint	43
Prediction of failure of hybrid composites with ultra-thin carbon/epoxy layers using the Coupled Criterion	43
Effects of random microvoid defects on the strength of carbon fiber-reinforced polymer composites	42
Synergistic anodic dissolution and hydrogen embrittlement in stress corrosion cracking of high-strength steels: Mechanisms and multiscale dynamics	42
Progressive deterioration and fracture mechanisms of heterogeneous rocks induced by open-ended microwave irradiation: A multi-scale numerical and experimental investigation	42
Experimental analysis and prediction of CFRP delamination caused by ice impact	41

A simple and efficient implementation of localizing gradient damage method in COMSOL for fracture simulation	41
Multiple edge cracks in a coated semi-infinite medium due to non-Fourier thermal shock	41
A damage formulation for continuum-kinematics-inspired peridynamics to capture fracture experiments	40
Comprehensive investigation of rock fracture behaviour in clay-rich rocks under the effect of temperature: Experimental study under three loading modes (I, I/II, II)	40
Local creep damage effects on subsequent low temperature fatigue crack growth behaviour of thick-walled pressure vessels	40
Experimentally validated macro-mesoscopic simulation study on the fatigue short crack initiation and propagation in polycrystalline structure utilizing CP-XFEM	40
Development and verification of interfacial fracture energy simulation methodology for porous stacked thin films	40
Fracture mechanics of sustainable ultra high performance repair mortar with flexible joints	39
Energy release rate in bimaterial specimens tested in pure modes I and II	39
Ductile fracture prediction of HPDC aluminum alloy based on a shear-modified GTN damage model	39
The propagation mechanism of hydraulic fractures in coal: an experimental study under true triaxial loading conditions	38
A DDM-perturbation-iteration model for asymmetric hydraulic-fracture propagation in layered heterogeneous reservoirs	38
Effect of complex stress states on creep rupture life of nickel-based superalloys: Mechanisms and modeling	38
Coupled thermo-hydro-mechanical modeling of hydraulic fracture propagation in hot dry rock	38
Adaptive isogeometric analysis–based phase-field modeling of brittle electromechanical fracture in piezoceramics	38
SEM- and DGFM-based evaluation of fracture parameters in self-compacting concrete incorporating silica fume and nano-silica	38
A physics-enhanced deep learning approach for prediction of stress intensity factors in bimaterial interface cracks	37
A thermo-mechanical phase field fracture model considering solid–liquid transition	37
Translaminar fracture toughness of carbon fibre reinforced polymer composite laminates with cross-ply configuration under biaxial tensile loading	37
A stress-based poro-damage phase field model for hydrofracturing of creeping glaciers and ice shelves	37
Rate-dependent damage and failure behavior of lithium-ion battery electrodes	36
Fatigue crack growth in functionally graded materials using an adaptive phase field method with cycle jump scheme	36
Effects of nonproportional loading and residual stress on creep crack tip fields	36
Finite element analyses of rail head cracks: Predicting direction and rate of rolling contact fatigue crack growth	36
Phase-field fracture modelling of piezoelectric quasicrystals	36
Editorial Board	36
Tearing fracture of poly(lactic acid) (PLA)/ poly(butylene succinate-co-adipate) (PBSA) cast extruded films: Effect of the PBSA content	36
Anisotropic magneto-electro-elastic fracture mechanics in orthotropic materials: Analysis using efficient interpolating modified MLS-based EFGMs and interaction integral	36
Discrete modelling of long-term flexural serviceability of cracked fibre-reinforced concrete using single-fibre/interface and matrix creep data	35
Numerical simulation of localized quasi-brittle fracture with an enhanced bi-energy norm based equivalent strain	35
Analysis of shear-dominated ultra-low-cycle ductile damage and failure behavior	35
Dual-actuator mixed-mode bending tests on structural adhesive joints	35
Dynamic mixed-mode I/II fracture of sharp V-notched rocks: a combined MFFM and DIC study	35
Two-dimensional integrated mixed-mode smeared crack model for simulating FRC structures	35
A three-dimensional meso-scale numerical simulation method for concrete considering the dynamic propagation path of cracks	34
Experimental study of residual stress distribution in interfacial micro-region of SiCf/Ti17 composites via micro-slotting method	34
Statistical analysis of microstructurally small fatigue crack growth in three-dimensional polycrystals based on high-fidelity numerical simulations	34
Impact compression behaviors of 3D angle-interlock woven composites under thermo-oxidative ageing	34
On the role of damage driving forces in scalar damage models for dynamic crack growth in 2D and 3D media	34
A novel defect-related cyclic damage model driven by strain energy density for LPBF titanium alloy	34
Hydrogen embrittlement and bulk hydrogen: Environments and testing methodologies	34
Crack propagation in anisotropic brittle materials: From a phase-field model to a shape optimization approach	34
Investigating the effects of real-time high temperature and circulating liquid nitrogen cooling on the granite Brazilian splitting test specimens	34
Comprehensive mechanical evaluation of heat-treated AISI 4140 (ETD 150): fatigue behavior and novel indentation-based characterization of fracture toughness and hardness with relevance to rail steels	34
A finite element analysis approach to predict constraint benefits to ductile tearing initiation toughness	34
Spherical indentation of heat-treated high strength alloys for fracture toughness measurement via modified limit load-expansion cavity model	34
Multiscale modeling of grain boundary-mediated damping capacities in polycrystalline metals	34
Peridynamic modeling of polycrystalline S2 ice and its applications	33
Inverse identification of cohesive zone parameters for sintered nano-silver joints based on dynamic convolution neural network	33
Simulation of progressive failure process in solid rocket propellants using a phase-field model	33
Fracture behavior analysis of X80 girth welds considering misaligned and variable-wall-thickness geometric features via modified single-edge notched tensile (MSENT) specimens	33
Investigation of fatigue crack growth behavior and crack tip plastic zone characteristics in welded structures based on local displacement fields	33
Effect of the loading rate on viscoelastic interfaces with bridging fibers	33
Effect of creepages on stress intensity factors of rolling contact fatigue cracks	33
A review on fracture propagation in concrete: Models, methods, and benchmark tests	33
Probabilistic damage tolerance assessment method based on the multi-scale crack growth model	32
A rate-dependent damage mechanics model for predicting plasticity and ductile fracture behavior of sheet metals at high strain rates	32
Crack safety analysis of coating with plastic behavior in surface-coated Zircaloy cladding	32
Uncoupled fracture model for E250, E350, and E450 grades of structural steel under monotonic loading	32
A novel 3D elastoplastic damage constitutive model considering the post-yield hardening behavior of trabecular bone	32
Computation of two dimensional mixed-mode stress intensity factor rates using a complex-variable interaction integral	32
An Experimental Investigation into Fracture Resistance of Carbon Fibre Sheet Moulding Compound	32
Simplified prediction model of thermal aging effect on fracture for cracked cast austenitic stainless steel components	32
Rock fragmentation using the disc tool assisted by the prefabricated kerf: Numerical modelling based on discrete element method (DEM)	31
Progressive damage framework for interface-controlled load-transfer and shear-coupled failure in composites	31
Fracture toughness weakening effect of high static pre-loaded CSTBD granite subjected to low frequency dynamic disturbance during the rock fracture	31
Based on weight function method internal crack propagation retardation model of giga-cycle rolling contact fatigue	31
Machine learning method for estimating the defect-related mechanical properties of additive manufactured alloys	31
Analytical solution for the structural strain parameter of power-law hardening materials to evaluate low- and high-cycle fatigue life of welded components	31
A machine learning method for HTLCF life prediction of titanium aluminum alloys with consideration of manufacturing processes	31
Fatigue behavior analysis and life evaluation method of building steel under the influence of multiple factors	31
A machine learning-based prediction model for mesoscopic damage feature parameters of concrete in freeze-thaw environment	31
Inverse parameter identification framework for cohesive zone models based on multi-island genetic algorithm	31
Brittle crack propagation simulation based on the Virtual Element Method and	31
Unravelling crack tip damage mechanisms: In-situ tensile assessment of Al-6Zn-2.1 Mg-2Cu alloy strengthened by Ti, Zr, and Sc micro-alloying	31
Experimental study and numerical simulation of transverse tensile behavior for thermoplastic glass fiber reinforced plastics	31
Fracture evolution and damage characteristics of bituminous coal subjected to cyclic cryogenic-steam thermal shocks: A DIC-based thermo-mechanical analysis	31
Fretting fatigue analysis and residual strength evaluation of railway axles containing defects of natural crack and micro-sinking	31
Machine learning-enabled creep life prediction model for nickel-based single crystal superalloys with consideration of structural shape effects	30
Mode I fracture behavior of heterogeneous granite: Insights from grain-based FDEM modelling	30

Numerical modeling and experimental investigation on fatigue failure and contact fatigue life forecasting for 8620H gear	30
Phase-field modelling of quasi-static and dynamic brittle fracture: A FreeFEM++ implementation	30
Influence of the stress history and of the Lode angle on the determination of the ductile fracture locus for two steel alloys	30
A bond-augmented stabilized method for numerical oscillations in non-ordinary state-based peridynamics	30
Inelastic zone around crack tip in polyacrylamide hydrogel identified using digital image correlation	30
Recognition of the cracking pattern of reinforced concrete due to 3D non-uniform corrosion under vertically varying marine exposure conditions	30
The influence of gradient difference in microstructure on hydrogen embrittlement susceptibility of extra-thick Q690DR steel plate	30
A unified life prediction model for 316L austenitic stainless steel under isothermal, thermomechanical fatigue and creep-thermomechanical fatigue loadings	29
Cyclic-fatigue crack growth in polymer composites: Data interpretation via the Hartman-Schijve methodology	29
Non-isothermal thermo-chemo-mechanically coupled phase-field fracture framework for EB-PVD thermal barrier coatings under thermal shock and CMAS corrosion	29
Mode I crack propagation in hybrid unidirectional woven composite thin laminates	29
Morphology of buoyancy-driven multiple hydraulic fractures	29
Unified cohesive zone model (UCZM) for fracturing and fragmenting solids	29
Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion	29
A mixed-element phase field method for the fracture analysis of beams	29
Adaptive phase-field modeling of fracture in orthotropic composites	28
Corrigendum to “Fluid-solid-phase multi-field coupling modeling method for hydraulic fracture of saturated brittle porous materials” [Eng. Fracture Mech. 286 (2023) 109231]	28
Fracture pattern prediction with random microstructure using a physics-informed deep neural networks	28
Experimental investigation of short fatigue crack propagation behavior within and across heat-affected zone in WAAM Ti-6Al-4V	28
Several cracks in a functionally graded piezoelectric plane: In-plane steady harmonic loading case solved by dislocation method	28
Fretting fatigue crack growth simulation and residual life assessment of railway press-fitted axle	28
A novel distribution function for modeling oxygen diffusion in functionally graded materials with cracks	28
A modified 3D G-criterion for the prediction of crack propagation under mixed mode I-III loadings	28
Predicting viscoelastic behavior and crack propagation in EPDM rubber under long-term thermal aging	28
Fracture behavior of carbon fiber reinforced coral aggregate seawater concrete	28
Directional development mechanism of hard rock fracture under true triaxial stress: Insights from macroscopic and microscopic fracture perspectives	28
In situ observation on fracture behavior of the three-phase zone of the L415/N08825 bimetallic composite pipe welded joint	28
Instrumented indentation based methods to assess fracture toughness (KIC) of self-compacting concrete: Influence of water to binder (w/b) ratio and type of concrete	28
A semi-analytical method for analyzing the interactions among multiple arbitrarily shaped cracks	28
Calibration of phase-field brittle fatigue model by purposeful design of crack driving forces	28
Data-driven fatigue crack propagation and life prediction of tubular T-joint: A fracture mechanics based machine learning surrogate model	28
Research on fracture damage characteristics of loess solidified with steel slag, calcium carbide slag and metakaolin	28
A fracture phase field model based on critical plane method and multi-axial fatigue life model	27
Editorial VSI Fracture behavior of additively manufactured materials and structures	27
Adaptive PF-CZM for multiphysics fracture analysis in functionally graded materials	27
A framework to model freeze/thaw-induced crack propagation in concrete based on a fatigue phase-field method	27
An automatic procedure for calibrating the fracture parameters of fibre-reinforced concrete	27
Novel semi-analytical model for solving the C*-integral of specimens with mode-I crack under various constraints	27
Microscale modeling of rate-dependent failure in thermoplastic composites under off-axis loading	27
Simulating concrete cracking and failure under impact loading using a novel constitutive integration paradigm in non-ordinary state-based Peridynamics	27
Formulas for the critical length of mode II and III cracks emanating from circumferential U–notches	27
Predicting ductile fracture during torsion testing using dislocation density tensor	27
A hybrid electromechanical phase-field and deep learning framework for predicting fracture in dielectric nanocomposites	27
A consistent ordinary state-based peridynamic formulation with high accuracy	27
Inverse identification method for determining stress–strain curves of sheet metals at high temperatures	27
Numerical analysis of damage evolution and blasting parameter optimization for jointed layered slopes under blasting loads	26
On the 1D homogeneous and localized solutions of variational phase field method for pressurized fracture	26
Phase field modeling of dynamic fracture in elastoplastic composites with interfacial debonding	26
Failure mechanisms and fracture patterns in rectangular concrete frustums under contact explosions	26
A novel approach for 3D discrete element modelling the progressive delamination in unidirectional CFRP composites	26
On the rock-cutting mechanism and vibration characteristics of TBM insert tooth cutter based on discrete element-dynamics coupling model	26
Data-driven estimates of the strength and failure modes of CFRP-steel bonded joints by implementing the CTGAN method	26
Fracture characterization from noisy displacement data using artificial neural networks	26
Fracture resistance of ultra-high-performance fiber-reinforced concrete containing nanoparticles at high strain rates	26
Static assessment of flawed notched components manufactured by L-PBF in AlSi10Mg: Experiments, computational approaches, a simplified method	26
Investigation on the dynamic bond-slip behaviour between steel bar and concrete	26
Effect of temperature and geometry on the brittle failure of an 18MND5 steel in the lower part of the ductile to brittle transition	26
Influence of morpho-structural parameters on environmental stress cracking in polyethylene	26
Experimental study on the intersection of hydraulic fractures with thin interlayers	26
A Coupled Criterion-based approach to develop an adherence test for adhesively bonded joints	26
Mechanism of hydraulic fracture vertical propagation in deep shale formation based on elastic–plastic model	26
Prediction of mode I crack propagation in rock based on fracture parameters from the boundary effect Model: Numerical study and experimental Validation	26
Characterize fracture geometry and propagation with low frequency distributed acoustic sensing strain data	26
Numerical study on dynamic fracture of rock-concrete bi-material Brazilian disks with a central interface crack	26
Scaling effect of concrete gravity dam subjected to underwater explosion in the field test	26
High cycle fatigue strength of additively manufactured AISI 316L Stainless Steel parts joined by laser welding	26
Inverse engineering based analytical and numerical prediction on ductile fracture for AZ60M magnesium alloy under wide stress triaxiality	26
Influence of solid solution treatment on fatigue crack propagation behavior in the thickness direction of 2519A aluminum alloy thick plates	25
The principle of virtual energy for predicting the strength of material structures	25
Characterization of crack-tip fields for elastoplastic fatigue crack growth Part II: Effects of crack closure and in-plane constraint	25
Modulating the fracture behavior of interface cracks via electric field gradient in flexoelectric solids	25
Finite element analysis of stress–strain relationship and failure pattern of concrete under uniaxial compression considering freeze–thaw action	25
Multiphase flow and heat transfer-driven fracture in saturated buffers for a nuclear waste repository: A novel phase-field cohesive zone model	25
Multiaxial damage parameter evaluation by neural network-based symbolic regression	25
Influence of axial prestress and loading rate on dynamic fracture of pre-faulted granite	25
Experimental characterization of tensile and compressive translaminar fracture toughness coupling multi-physics measurements	25
Dynamic prediction of aluminum alloy fatigue crack growth rate based on class incremental learning and multi-dimensional variational autoencoder	25
Mixed mode fracture toughness of epoxy molding compound/printed circuit board interface of semiconductor packages with respect to temperature and moisture	25
Effects of bacteria-embedded polylactic acid (PLA) capsules on fracture properties of strain hardening cementitious composite (SHCC)	25
Vickers indentation crack propagation analysis and finite element simulation verification based on the cohesive zone model in silicon carbide ceramics	25
Solving plane crack problems via enriched holomorphic neural networks	25
Effects of adherend notching on the bonding performance of composite single-lap joints	25
The constitutive model and damage response of PEEK under high temperature condition	24
Rock fracturing mechanism and arrangement of fracturing holes using hydro-mechanical splitters	24
Dynamic tensile strength of rock specimens with different defect lengths	24
Influence of pores on the lifetime of die cast aluminium alloys studied by fracture mechanics and X-ray computed tomography	24
A two-curve model for crack arrest prediction of high-grade pipeline based on Crack Tip Opening Angle	24
Multiscale study of laser-induced dynamic fracture: phenomena, mechanisms and applications	24
Fracture behaviors of modified 9Cr-1Mo steels in liquid lead–bismuth eutectic immersion environment using in-situ testing technique	24
Multi-scale modeling of decohesion characteristics of second phase particles from the matrix in uniaxial tension in a high strength aluminum alloy	24
Multi-layer statistical analysis and surrogate model based fatigue crack growth reliability assessment of lifting lug structure under random load history	24
Micromechanics-informed cohesive fracture analysis of UHPC with emphasis on the combined effect of structural size and fiber content	24
Investigation on the propagation characteristics of tensile fractures crossing interfaces within dry hot rock reservoirs based on the Brazilian split test	24
Dynamic behavior of a running crack crossing mortar-granite interface with different interface inclinations	24
Assessment of inter- and intra-granular fracture behaviors of polycrystalline LiNixCoyMn1-x-yO2 particles during a charging process	24