Ferroelectrics

Papers
(The TQCC of Ferroelectrics is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Guest Editorial27
Phase evolution, microstructure and electrical response of KNNT ceramics with Li+ substitution and doping20
Preparation and properties of high porosity activated carbon material used as electrode material19
Studies on structural, dielectric, electrical, and ferroelectric properties of the polycrystalline NaBiFe 2 O 518
Forward growth and formation of 1D domain arrays by focused ion beam in Y-cut MgOLN16
Study of [Pb(Fe 1/2 Nb 1/2 )O 3 ]-(SiO 2 -B 15
Improved luminescence in BA-CaF 2 : Eu 3+ nanoparticles for LSC13
Influence of the dielectric constant and thickness of metasurface on terahertz frequency based on plasma resonance12
Preparation and properties of organosilicon-polyurea composites11
Investigation on barium zirconate nanocomposites for optical and dielectric properties11
The effect of ZnO and MnO 2 as sintering aids in the preparation of potassium sodium niobate ceramics and electrical characterizations10
Effect of process parameters on microstructure and Raman characteristics of magnesium doped ZnO thin films10
Processes of mechanical degradation of high-density polyethylene + nanoclay nanocomposites after exposure to an electric field10
Propagation modeling and guided waves in a ZnO piezoelectric planar resonator: open-circuit and short-circuit cases10
Fabrication and investigation of a memristive crossbar array artificial synapses based on electrochemical titanium oxide for neuroelectronics9
Modeling of hollow cylinder piezoelectric resonator with current excitation by a double Legendre polynomial method9
Review on PZT as a mechanical engineering material9
Reduction of leakage current and large enhancement of ferroelectric properties in Sb doped Bi4Ti3O12 ferroelectric thin film with Sb doped Bi2Ti29
The synergistic effect of graphene oxide and flame-retardant fabrics9
Correlation Functions and Properties of Local Distributions of Frustrated Phases in the Ground State of a Dilute Ising Chain in a Magnetic Field9
Dielectric and antiferroelectric properties of Mn-doped CaZrO3-NaNbO3 ceramics8
Preparation and properties of chitosan-based antibacterial and antiviral nanofibers8
Design of composite layered ferroelectric ceramic lamps based on stable diffusion model under the background of meta-universe8
Change in Properties of Thermoplastic Polymer with Metal Oxide Nanofiller (PP + ZrO 2 ) After Electrothermopolarization8
Regulation of negative differential resistance behavior of zigzag GeSe nanoribbon by the doping of N atoms and edge passivation8
The effect of mole fraction on the phase transition of BaxSr1-xTiO3 ceramic from cubic to tetragonal assisted by Rietveld analysis8
Polarization reversal in the uniaxial ferroelectric under full compensation of depolarization field8
Aspect ratio optimization of piezoceramic elements for maximizing electromechanical energy conversion in energy harvesting applications8
Preparation of AgInS2 thin film by electrodeposition method8
Influence of the piezoelectric substrate PMN-PT on the superconducting properties of Co1/Cu/Co2/Cu/Pb superconducting spin valve structure7
Synthesis, dielectric, and magneto – dielectric properties of carbon quantum dots/ZnFe 2 O 4 hybrid nanocomposite7
A DFT and Monte Carlo studies of physical properties of the Fe2N compound7
Low-temperature sintering and piezoelectric properties of Na2O excess (Na0.52K0.44Li0.04)(Nb0.88Sb0.08 Ta0.04)O37
Low temperature relaxor behaviour of SrBi 1.5 La 0.5 Nb 2 7
Electric field control of photoluminescence response in lanthanide doped ferroelectric materials: A brief review7
Experimental investigation on L-beam vortex-induced vibration piezoelectric energy harvester with interference step7
Study on the properties of sodium bismuth titanate coating prepared by supersonic plasma spraying6
High energy ball milling method for silicon-based anode materials with porous structure research6
Alkali and mixed alkali effect: Spectral investigations on Sm 3+ and Dy 3+ ions doped zinc tungstate borophosphate glasses6
Temperature dependent transition effects on the dielectric properties of PVA/Y 2 O 3 polymer nanocomposites6
Dielectric relaxation and domain-wall freezing in (CH3NH3)5Bi2Cl11 ferroelectric crystal6
Structural, micro-structural, resistive and capacitive characteristics of Mn modified lead zirconate titanate: Pb(Zr 0.35– x 6
Study of dielectric properties of nanocrystalline material BaTiO 3 -SiO 26
Theoretical investigations on the electronic structure and optical properties of orthorhombic Ce 0.7 Nd 0.3 AlO 36
Molecular interaction analysis and relaxation findings of amphiphilics in solution state6
Microstructure and mechanical properties of Cu-Ti alloy by mechanical alloying6
Guest Editorial6
Experiment research of LiFePO4as cathode materials prepared by carbothermal reduction6
Electrochemical characterisation of catalytic property for oxygen reduction reaction on cobalt ferrite electrode5
Research on control strategy of electric vehicle battery thermal management system based on MPC5
Influence of ethanol content and temperature in coagulation bath on the microstructure and performance of polyvinylidene fluoride ultrafiltration membranes5
Structural, Electrical Studies of K0.47Na0.47Li0.06NbO3+(x) Bi0.5Na0.5ZrO3 Composites5
Study on the preparation of high performance water reducer by nano-micron monomer in the durability of high performance concrete5
Degradation of rhodamine B by g-C3N4/MoS2 composite photocatalyst5
Dielectric, electrical and optical properties of a Ni-substituted double perovskite ceramic5
Piezoelectric properties of the 3D-printed lead-free ceramics5
Characterization of 0–3 piezoelectric polymer composites using FEA for biomedical transducers applications5
Effect of cryogenic cutting surface integrity on fatigue life of titanium alloy Ti-55535
Influence of thermal cycling rate and sintering temperature of barium titanate and barium strontium titanate ceramics on their dielectric properties5
Perfluorooctanoic acid used as a new covalently bonded electrophoretic coating to analyze proteins5
Shape of charged domain walls in bidomain lithium tantalate plates with composition gradients5
Application of collaborative perception computing in electrochemical impact analysis of nickel rich cathode material5
Application of energy storage performance regulation of ferroelectric thin films in sports competitions5
Bacterial foraging optimization algorithm based on normal cloud model for forward kinematics of a 4-DOF parallel manipulator5
Kinetics of the domain structure in calcium orthovanadate crystals under application of the series of electric field pulses5
Figures of merit of PLZT ferroelectric ceramics for practical applications5
Domain structure evolution in calcium orthovanadate crystal induced by IR laser irradiation5
Up-conversion phosphors: a short review5
Experimental study on tool wear in milling CFRP/Ti laminated materials with diamond coated unit edge tool5
A study of structural, electrical and magnetic properties of zinc substituted magnesium ferrite5
Terahertz time-domain spectroscopic ellipsometry of metallic strontium titanate5
Effect of Sb modification on dielectric and electrical properties of lithium bismuth titanate5
Dynamic crystal monitoring method for crystallization process based on deep learning5
Effect of temperature and pressure on mechanical and thermal properties of lithium boron nitride Li3BN2 with density functional theory5
Piezoelectric hysteresis in ferroelectric ceramics in a weak electric field5
Research on the friction and wear performance of remanufactured shaft parts of failed machine tools4
Preparation and properties of highly catalytically active lignin used as electrode material from eucalyptus residue4
Electrical conductivity study of BaSb 4 Ti 4 O 15 compound4
Design of a new cantilevered cylindrical traveling wave ultrasonic motor4
A novel model for fatigue strength prediction based on the true stress-strain curves4
Ab initio investigation of Bi/BaTiO3 and Bi/PbTiO3 heterostructures for spintronic applications4
Piezoelectric properties of PMN-PNN-PZT ceramics for the application ultrasonic device of ultrasonic tooth cleaner4
Preparation and properties of Li4Ti5O12 nanotubes as anode material4
Development of a triple-band terahertz metamaterial absorber with frequency switching and amplitude modulation characteristics4
Effect of friction stir processing on microstructure, mechanical, and damping properties of Al-5Fe alloy4
Critical characteristics of spin − 1/2 four-leg nanotube: Monte Carlo Simulation4
Application of CNTs-MoS2/SnO2 p-n heterojunction nanocomposites in lithium-sulfur batteries4
Study on the mechanism of additives affecting corrosion resistance in zinc alloy plating4
Study on enhanced photoluminescence properties of Au surface-modified ZnO NRAs composites4
Ultrasonic methods for the study of relaxation phenomena in dissipative media4
An experimental study of the influence of the temperature rising on the performance of a piezoelectric ceramic employed in ultrasonic baths4
Electrically polarized hydroxyapatite with Sr containing barium titanate incorporated with mangiferin for enhanced osteogenic and antibacterial activity4
Dynamically tunable terahertz metamaterial absorber based on the composite structure of graphene/shape memory alloy4
Active electrode materials for lithium-ion battery4
Physical properties and energy storage performance of TeO2-based ferroelectric glass-ceramics4
Understanding the impact of Gd3+ substitutions on the enhancement of dielectric and electrical behaviour of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O4
Lattice expansion and ferroelectricity of PbxSr1−xTiO3: a phenomenological study4
Research on new method of transformer winding deformation detection4
Phase transitions of binary perovskites ABX 3 ( X = O or F) and their interatomic bond strains4
Dielectric ordering of water molecules in the dipole lattice of potassium hexacyanoferrate(II) trihydrate4
Analyzing Temperature – Dependent Structural Changes and Frequency Response of a Ferroelectric Nanocomposite Based on Triglycine Sulfate with Oxidized Multiwalled Carbon Nanotubes4
Microstructures and mechanical properties during sinter-forging of a novel TiAl alloy4
Magnetic circuit for current measurement of transmission line4
Synthesis and preparation of Li2MnO3 microwave dielectric ceramics4
Comparative study of zinc base alloy coatings: composition, microstructure, and corrosion resistance4
Study on the tap density of silver powder prepared by liquid phase reduction method4
Radio-absorbing properties of (1-x)BiFeO3xLaMnO3 (0.1 ≤ x ≤ 0.9) solid solutions4
Electrical characterization of Sn modified barium bismuth zirconate4
Band gap tuning in samarium-modified bismuth titanate ferroelectric via iron doping for photovoltaic applications4
Electrochemical performance analysis based on chromium mist inhibitors4
Experimental study on wear performance of before and after magnetic treatment of hot-pressing sintering iron-based diamond bit matrix4
Structural, dielectric, impedance, and electric modulus characteristics of Y 2 CaCuO 5 high-k dielectric ceramics4
Dependence of RF/analog and linearity parameters on ferroelectric layer thickness in ferroelectric tunnel junction dual material double gate (FTJ-DMDG) TFET4
Influence of ultrasonic vibration on forming force of 1060 aluminum sheet single point incremental forming4
Effect of a hydrogen plasma jet on the bulk properties of piezoelectric PZT ceramics4
Proper and improper ferroelastics with perovskite-derived structures4
Structure, dielectric and magnetodielectric properties of ceramics of the system (1− x )BiFeO 3x /2P4
Tunable negative differential resistance behavior in the nitrogen-doped zigzag GeSe nanoribbon based single-gate field effect transistor4
Construction and verification of pressure response model for series dual-chamber brake valve in commercial vehicles4
Synthesis of nano-size BaTiO3–BiFeO3 system with low melting temperature KVO3 addition4
Development of bifunctional reagent based on porphyrinized gold nanoparticles for biology application3
30 GHz ferroelectric phase shifter on silicon carbide3
Actively tunable toroidal dipole resonance in hybrid terahertz metal-graphene metamaterials3
Effect of annealing temperature on properties and second phase characteristics of 443 stainless steel hot-rolled sheets3
The MFL detection method by the gradient hall sensors array for the cracks on the top surface of the rails3
Locating a droplet on piezoelectric substrate based on a smartphone3
The enhancement of polymer composite coating by using a waste glass powder as alternative reinforcement3
Dielectric, structural, and optical studies of l -histidine glutarate monohydrate (LHGMH): an organic crystal3
Near-infrared quantum cutting in NaYF4:Ce3+,Yb3+ nanocrystals for luminescent solar concentrators3
CoFe 2 O 4 -BaTiO 3 nanocomposites; role of ferrite phase on the structural, optical and magnet3
Studies of structural, dielectric, and impedance characteristics of Bi 3.8 Gd 0.2 Ti 3 O 3
Effects of hydrothermal temperature on morphology and electrochemical properties of ZnCo 2 O 4 -based composites nanomaterials3
Obituary: Václav Janovec (1930–2022)3
Challenging Fabrication and Characterization of a New Ferroelectric Solid-Solution Composition 0.30Bi(Cu 1/2 Ti 1/2 )O 3
Electronic structure, optical and electrical characteristics of multiferroic [Pb(Fe 0.5 Nb 0.5 )O 3
Preparation and enhanced photoelectric properties of ZnO/ZnSe nanorods arrays composites3
P(VDF-TrFE-CFE) polymer based electrocaloric device design for battery cooling3
Multilayer digital materials based on porous piezoceramics and polymer matrix with the inclusion of conductive components3
Features of magnetic structure and properties of ceramics (1 − x)Pb(Fe 1/2 Nb 1/2 )o 3 —xPb(Fe 3
Effect of calcination temperature on the structural and electrical properties of low temperature sintered the (Na0.52K0.44Li0.04)(Nb0.88Sb0.08Ta<3
Investigation of dielectric constant for PbTiO 3 film in THz range3
Thermally controlled structural strain reduction in core shell magnetoelectric nanocomposite3
Investigation of the influence of the properties of the piezoelectric substrate PMN-PT on the superconducting spin valve Fe/Al/Co/Pb3
Toroidal dipoles in tunable THz metamaterial based on perovskite3
Research on Design and Characterization of a Vibration Actuator Based on 0.655PMN-0.345PT Piezoelectric Ceramics3
Microscopic characteristics and corrosion resistance of 7075 aluminum alloy modified by friction stir processing3
Surface free energy, microstructure and performance of polyvinylidene fluoride (PVDF) membrane: the influence of hydrophilic porogens3
Thermal expansion anomalies in polar and ferroelectric crystals3
Preparation and characterization of nano silver antibacterial gel for gynecolog3
Investigation of dielectric study of Bi2Sb3:Te materials3
Structural and electrical conduction properties of Y 3+ ions substituted Li-Zn-Ti ferrites3
Study on the preparation of nano-powder and its mechanical properties on the sole of sports shoes3
Modeling and applications of quantum storage photodetector3
Critical character of the field dependence of giant values of converse piezoelectric moduli in polycrystalline relaxor ferroelectric 0.675Pb(Mg 1/3 Nb 3
Design and simulation of ultrasonic welding system based on TbDyFe alloy3
In Memory of Boris A. Strukov3
Piezoelectric, dielectric and ferromagnetic properties in epitaxial multiferroic Pb(Zr0.45,Ti0.55)O3/Co0.8Fe2.2O4 thin film treatment 3
Structural and dielectric properties of Y 3+ doped SrTiO 3 : a novel anode materials for solid oxide fuel cell3
Dielectric properties of SrTiO 3 /PbTiO 3 /SrTiO 3 epitaxial structures3
Guest Editorial3
Inductively coupled plasma etching of LiTaO 3 in CHF 3 /Ar plasmas3
Study the influence of the crystal structure of the co-precipitated brownmillerite CaFeO 2.5+δ sample on optical and magnetic properties3
Micro structure analysis of the coating of polyurethane coated urea during nitrogen release process3
DFT mechanistic study of Pt Sub-monolayer adsorption on BiAlO3 (0001) polar surfaces3
Structural and physical properties of hydroxyapatite modified by Sr/Ca substitutions3
Study on epoxy bonding properties of thermoplastic polyurethane/polyphenylene sulfide composites reinforced by surface-modified basalt fiber3
Research on structure and algorithm of high energy efficiency water chiller3
Experimental investigation and statistical analysis of tensile strength and thermal conductivity of polylactic acid nanocomposites3
Composite structures “ferroelectric/glass/dielectric matrix”3
Conductivity and photoconductivity of Ba0.8Sr0.2TiO3/LaMnO3 heterostructure3
Effect of Substitution of Mn on Electrical Properties of Bismuth Ferrite3
Self-assembled growth of stripe nanodomains induced by single-pulse: IR laser irradiation in LT crystals covered by conductive layer3
Study of the properties of a PZT thin film formed on a highly doped silicon substrate3
Electrical characterization of BaBi 4 Zr 2 Sn 2 O 15 complex3
Exploring structural contributions to ferroelectricity of amino-acid based ferroelectric crystals of glycine silver nitrate3
Domain shape evolution under multiple IR laser irradiation in lithium niobate3
Guest Editorial3
Colossal dielectric constants in Sr(Fe0.5Nb0.5)1-xMnxO3 prepared by a modified solid-state reaction technique3
Dielectric analysis of surface modified nano-graphite: effects of frequency and thickness3
The adsorption and Fenton catalytic degradation of tetracycline by Fe3+ and Fe2+ modified bentonite3
Thermal stability and luminescence of zinc and lanthanide(Tb 3+ and Ce 3+ ) coordination polymers with pyridine-2,5-dicarboxylic a3
Enhancement of dielectric and ferroelectric properties of (Sr, Ni) Co-doped BaTiO 3 ceramics3
Magnetic behavioral nature of Ti 4+ substituted lithium zinc manganese ferrite3
Crystallographic parameters of spherulitic structures in ferroelectric film3
First principal calculation of the physical proprieties of the ternary intermetallic compound Gd 2 Cu 2 Cd for magnetic refrigerat3
Features of the structural and dielectric properties in BaTi1-xSnxO3 ferroelectric ceramics3
Facile fabrication and technical analysis of copper doped Gd 2 O 3 nanoparticles: Photocatalytic elimination of Rhodamine B dye un3
Effect of MoS2 content on anti-friction and wear-resistance of nickel-based alloy cladding layer3
Observation of elastic Weyl points in ferroelectric based sonic metamaterials3
Piezoelectric transformers based on shear vibration modes3
Variation of Cochran’s excitation frequency, capacittivity, and dissipation factor in rubidium dihydrogen phosphate crystal3
Application of ink based on zno semiconductor nanomaterials in printing process3
Luminescence study of samarium-doped Ca2KZn2(VO4)3 phosphor as a potential candidate for lighting and display device applications3
Design of heterostructure one-port SAW resonator with improved bandwidth using Si and LiNbO 3 layer3
Stabilization of the ferroelectric phase of potassium nitrate in a (KNO3)0,9(NaNO2)0,1 double salt system2
Growth, optical, dielectric and mechanical studies in ferroelectric bis(methyl ammonium) tetrachlorocadmate single crystal2
The tuning of temperature stability in ultralow loss (Ba/Sr) zirconate microwave dielectric2
Application of graphene-EDTA nanomaterials in oil painting creation2
Electro-optical characterization of rare earth doped CuInS 2 thin films synthesized by CBD2
Effect of domain wall conductivity on domain formation energy2
Magneto-electric effects in coaxial nanofibers of hexagonal ferrites and ferroelectrics2
Effect of dimension size on electromagnetic radiation energy characteristics of lead zirconate titanate under drop weight impact load2
Dominant role of in defect on carrier distribution and photocatalytic activity for BiVO 42
Planar on-chip micro-supercapacitors based on reduced graphene oxide and carbon nanotube by liquid–air interface self-assembly and photolithography2
Effect of substitution of (NiNb)4+ into B-sites on the phase formation, microstructure and electrical properties of Bi0.47Na0.47Ba0.06TiO3 cerami2
Study on microstructure and properties of 17-4PH and 420 double-wire cladding layers2
Phases and morphology of CuFeTe2 films prepared by electrodeposition2
Interaction of wedge-like domains created by local polarization reversal on nonpolar cut of lithium niobate2
Specifics of heterophase structures in some perovskite-type lead-free ferroelectric solid solutions2
First-principles study of the ferrielectric of X-doped KNbO3 (X = Na, Rb, and Cs)2
Influence of the ratio of characteristic sizes of components and samples geometry on the dielectric constant of the “porous piezoceramics-polymer” composites2
A study of Ni–P electroless coating modified by rare earth oxide (La2O3, Y2O3 and Ce2O3) on pre-phosphorized zirconium alloy2
Field experiments of watt-level piezoelectric energy harvester for different embedded depths2
Aspect ratio dependence of complex electromechanical parameters of dense and porous piezoceramic elements2
Characterization, performance analysis and comparison of ZrO 2 or TiO 2 doped Al 2 O 2
Effect of boron on the microstructures and properties of 17-4PH/TiC coatings by laser cladding2
Hydrophilic properties of the aluminum alloy induced by femtosecond laser structuring2
Analysis of energy bands and density of states of CuFe(S x Se y Te 1-x-y ) 22
Structure features of the modified ceramics Ca 0.3 Ba 0.7 Nb 2 O 62
Study of structural and electrical properties of oxides added K 0.47 Na 0.47 Li 0.06 NbO 2
Structure, microstructure, and functional properties of modified sodium niobate ceramics2
Structural and dielectric relaxation studies of 1, 4, and 1, 3 -butanediol–1, 4-dioxane mixtures using TDR technique2
The domain shape in an external field: Role of the gradient zone2
Photolithographic fabrication and characterization of ultrafast response integrated planar micro-supercapacitors for on-chip energy storage devices2
Control of the LiFePO4 electrochemical properties via a pray-drying-assisted a solid-phase reaction route using Fe3(PO4)2 as iron precursor2
An intelligent integrated EDI module based on fuzzy PID2
Studies on structural, dielectric, and ferroelectric features of lanthanum modified complex Bismuth Nickel Titanate ceramic2
Critical character of the field dependence of giant values of converse piezoelectric moduli in textured 0.675Pb(Mg 1/3 Nb 2/3 )O 2
Conductivity and photoresistance of the film heterostructure Ba0.8Sr0.2TiO3/LaMnO3/Ba0.8Sr0.2TiO3 on the MgO substrate2
Effect of shortened alkyl chain on photothermal properties of D-A-D conjugated small molecules2
Development of PVA-ABO 3 organic-inorganic nanocomposite proton exchange membrane for HT-PEMFCs2
Parameter optimization of ball-end milling cutter with blunt-round edge and micro-texture on flank2
Obituary: Karl Alexander Müller (1927–2023) Nobel Prize Laureate in Physics 19872
Sintering Technology of Cemented Carbide Cutting Tool Based on Digital-Twin2
Obituary: Boris A. Strukov (1935–2023)2
Ferroelectric properties of Sr0.5Ba0.5Nb2O6 thin films grown on a Si(001) substrate by RF cathode sputtering2
Electrochemical deposition of Ag nanoparticles on ITO-coated glass: effect of different cyclic voltammetry scan rates on Ag deposition2
Preparation and application of graphene oxide hybrid polyaniline based flexible electrode materials2
Synthesis, characterization, and dielectric studies of magnetic iron oxide nanoparticles2
Microstructure, dielectric, and impedance spectroscopy of the dysprosium-modified LaBiO 3 ceramic2
Preparation and electrochemical performance of NiCo 2 S 4 nanoelectrode materials2
Influences of bismuth dopant on structural, morphological, and optical properties of barium titanate thin film2
The theoretical study of the analytical potential energy functions, spectroscopic parameters and vibrational spectra of GeO molecules2
Charged domain walls in lithium niobate and lithium tantalate crystals with composition gradients2
Image detail enhancement of nanocomposites based on deep convolution neural networks2
Monoclinic distortion in strain relaxed [111] PbTiO3 epitaxial films2
Preparation and electrical properties of fully organic copolymer-based composite films2
Ultrafast response planar on-chip micro-supercapacitors based on nitrogen and oxygen co-doped graphene quantum dots with both ultrahigh power and energy densities2
Research on sand blank preparation and sand mold NC precision milling technology2
Orientation effects, hydrostatic response, and figures of merit in 2–2-type composites based on relaxor-ferroelectric single crystals2
0.072873115539551