Fibre Chemistry

Papers
(The median citation count of Fibre Chemistry is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Improving the Accuracy of Digital Prediction of Deformation Modes of Operation of Polymer Textile Materials12
Modeling of Elastic Properties of Twisted Polyester Textile Threads9
Investigation and Analysis of the Properties of Polyparaphenylene-1,3,4-Oxadiazole Fibers Intended for Textile Products6
Investigation by 3D Simulation of the Interaction of Fibers of a Multilayered Cellulose-Containing Material5
Features of Dispersion of Pulp to Produce Fluffed Material5
Determination of Relationship of Technological Parameters of Flocking Process with Electrical Resistance of Nap4
Mechanical Properties of Composite Material Based on an Oxyfluorinated Fibrous Filler4
Development of Materials for Upholstered Furniture Elements of Reduced Fire Hazard3
Planning the Production of Chemical Fibers and Threads from Secondary Raw Materials Based on Optimization of Indicators and Development of Models of Material Intensity of Production Processes3
Progress in Chemical Treatment of Fiberglass – Current Trends in the Development of Reinforcing Materials for Heavy-Duty Fiberglasses. Review3
Non-Uniformity in the Composition of a Mixed Two-Component Fibrous Flow3
Modeling of Fiber Movement Track in Needle System3
Isolation of a Sulfated Polysaccharide from Brown Algae of the Family Fucaceae3
Methods for Checking the Reliability of Mathematical Models for Describing Deformation Processes of Polymer Textile Materials3
Electrophysical Properties of Textiles with Metallic Nanocoatings2
Effect of Processing Regimes on Mechanical Properties of Material Based on a Three-Component Fiber Mixture2
Characteristics of Change in Properties of Aramid Threads upon Treatment of ther Surface with Low-Concentration Carbon Nanotube Suspension2
Modeling and Predicting Elastic, Viscoelastic, and Plastic Properties of Synthetic Fibers2
Effect of Composition of Nonwoven Needlepunch Cloth on Porosity of Processed Material2
Version of Mathematical Simulation of Deformation Properties of Polymer Textile Threads2
Deformation Processes of Polyamide Fabrics for Parachute Domes According to Tensile Diagrams2
Methods for Controlling Accuracy of Prediction of Polymer Textile Materials Relaxation Processes2
Junction Adhesion Strength in a Layer of Aluminum-Carbon-Fiber Composite Material2
Effect of Thermal Stabilization Regimes of Bilayer Knitted Fabrics of Modified Polyester Yarns on Capillary Properties2
Increasing Adhesion of Carbon Fiber Filler to Polymer by Sizing – a Review2
Modeling Rinsing of Residual Solvent from Fiber Produced from the Copolymer of Acrylonitrile, Methacrylate, and 2-Acrylamide-2-Methylpropanesulfonic Acid2
Prediction of Relaxation and Deformation Conditions of Performance of Polymeric Textile Materials2
Structural Characteristics of Synthetic Felt for Shoe Upper2
Influence of Modification on the Structure, Properties, and Thermal Transformations of Polyacrylonitrile Fiber2
Relationship of Strength of Fibers Obtained from Ultrahigh-Molecular-Weight Polyethylene Gel with Different Multiplicity of Orientation Stretching with their Breaking Elongation2
Use of Cellulose-Containing Waste in Substrates for Growing Plants2
Microplastic Strength Increased by Using Graphene Oxide to Modify Aramid Filler2
Detection of Local Inhomogeneities Along the Length of Fibers And Yarns2
Qualitative Assessment of Relaxation and Recovery Properties of Polymer Textile Materials2
Knitted Catalyst for Decomposition of Anthraquinone and Acid Dyes in Wastewater1
Synthesis of Tercopolymers of Acrylonitrile in Aprotic Solvents1
Synthesis of Bimetallic Copper–Silver Nanoparticles in Solutions and on Polymeric Materials1
Ultrasonic Devices for Non-Contact Intensification of Technological Processes1
Promising Technology for Modification of Wool Textile Materials to Reduce Shrinkage1
Acoustohydraulic Sputtering Method for Depositing Coatings on Fibrous Materials1
Trends in Carbonization of Poly(Vinyl Alcohol) Fibers1
Improving the Competitiveness of Polymer Textile Materials Based on Digital Prediction of their Deformation Properties1
Prediction of Deformation Modes of Functioning of Polymer Fiber Materials under Variable Temperature Conditions1
System Analysis of Deformation Properties in Polymer Marine Ropes1
Time-Spectral Modeling of the Viscoelastic Behavior of Polymer Textile Materials1
Mathematical Modeling of Functional Processes of Polymeric Textile Materials1
Optimization of Selection of Mathematical Model for Predicting Deformation Processes of Polymer Materils1
Development of Energy- and Resource-Conserving Energy Sources for Chemical Fiber Production1
Influence of an Acidic Comonomer on the Properties of Polyacrylonitrile Fibers Produced by the DMF Method1
Preparation of a Nanostructured Nonwoven Material Using Plasma1
Effect of Direct Dyes on the Physical and Mechanical Properties of α-Keratin Fibers1
Morphology and Physicomechanical Properties of Polymer Composite Materials Based on Low-Density Linear Polyethylene and Polypropylene Containing Quasicrystalline Fillers Al−Cu−Fe and Al−Cu−Fe−B1
Development and Investigation of Knitted Filter Materials Using Multifilament Threads1
Technical Fiber Based on Flax Cellulose as Tire Cord Precursor1
Modern Textile and Other Flexible Materials for Shielding Electromnetic Radiation − Review1
Physicomechanical Properties of Metallized Synthetic Threads1
Computer Modeling and Quality Assessment of Operating Properties of Polyamide Fabrics for Parachute Canopies1
Electrospinning of Akvapol® Modified Polyurethane Aqueous Dispersions1
Study of Inflammability Parameters of Fireproof Textile Materials1
Approach to Control of Kinematic and Thermal Parameters of Threads During Spinning from Polymer Melts1
Investigation of Effect of Fireproofing Finish on Physical and Mechanical Properties of Hollow Fiber Constructional Nonwovens1
Application of the Linear Filtration Law for Predicting Air Permeability of Non-Woven Needle-Punched Fabrics1
Refining the Parameters of Models of Deformation Processes of Polymer Textile Materials1
Modeling the Deformation Process of a Fibrous Material in the Passage and Winding Zone of a Multidimensional Dynamic Object1
On Hydrogen Energy, the Global Market for Fuel Cells, and the Development of Domestic Gas-Diffusion Layers1
Influence of Degree of Twist of Polyester Sewing Threads on Their Deformation Properties1
Current Problems and Approaches to Simulation of Continuous Processes of Chemical Fibres and Threads Production1
Self-Optimizing Production System for Preparation of Fibrous Product for Forming Composite Materials1
Interaction of Fine-Dispersed Particles in Ultrasonic Field1
Mathematical Modeling of Deformation Processes of Medical Textile Elastomers for Implantology1
A Textile Material for Filtrering Hot Process Gases and Industrial Air1
Nonwoven Needle-Punched Materials with High Tensile Strength1
Modified Needle-Punched Nonwoven Based on Blend of Polymer Fibers1
Determination of Statistical Relationships of Quantities Characterizing Performance Properties of Fibers for Production of Reinforcing Components of Composite Materials1
Mass Dyeing of Polyacrylonitrile by Thermochromic Dyes0
A Probabilistic Approach to Modeling the Percolation Process in Composite Yarns with Conductive Nanofillers0
Qualitative Assessment of the Functionality of Polymer Textile Materials for Increasing Their Competitiveness0
Adhesion Properties of Glutinous Yarn0
Carbon-Polymer Sorbents for Purification of Wastewaters and Surface Waters from Oil and Oil Products0
Effect of Static and Dynamic High-Temperature Exposure on Thermal Aging of Twaron VGA-220 Fabric0
Use of Fluoropolymers as Components of Fuel Cells0
Electrically Conducting Polymer Composite Monofilaments with a Blended Filler0
Effect of Heat Treatment on Mechanical Properties of Polyoxadiazole Yarns0
Extraction of Biopreparations and Production of Cellulose Fiber from Nettle0
Basic Patterns of Moisture Absorption during the Hydrothermal Treatment of Fibrous and Dispersed Materials with the Periodic Heat and Moisture Supply0
Computer Prediction and Systems Analysis of Deformation Processes of Polymer Textile Materials0
Intensifying Action of Quaternary Ammonium Salts in Dyeing Processes of Fibrous Materials0
Improving the Quality of Cellulose for Use in Disposable Sanitary and Hygiene Products0
Comparative Tests of Thermally Bonded Nonwoven Materials in Springless Mattresses and Effect of Bicomponent Fibers on Deformation Properties0
Thermodynamic Properties of 1-Allyl-3-Methylimidazolium-Chloride–Monosaccharide–Water Ternary Systems0
Modeling Paper and Cardboard Fibers Using 3D Technology0
Use of Additive Technologies to Produce Carbon-Polymer Membranes0
Development of Technology for Producing Sound-Insulating Materials Using Waste0
Special Features of Convective Drying of Dispersed and Fibrous Materials with Periodic Heat Supply0
Thermodynamics of Sorption Processes in Sorbents Based on Pectic Polysaccharides0
Combined Influence of the Control Parameters of a Web-Forming Machine on the Web Height0
Sulfur-Containing Polyarylenes for Thermally and Chemically Resistant Films and Fibers0
Influence of the Processing of Non-Woven Needle-Punched Materials on the Air Flow Mode0
Weibull-Gnedenko Distribution Parameters for Mechanical Characteristics of Single Aramid Arn Filaments After Treatment with Low-Concentration Carbon Nanotube Suspension0
Investigation of the Bactericidal Properties of Textile Materials Modified with Bimetallic Nanoparticles0
Dyeing of Meta-Aramid Fiber Materials0
Study and Modeling of Polypropylene Composite Monofilament Warm-Up in the Process of Thermal Treatment0
Methods for Determining Average Molecular Mass and Molecular-Mass Distribution of Polyamide 6. Review0
Methodological Challenges in Accounting for Test\ Conditions When Determining the Static Elastic Modulus of Advanced Aramid Structural Fibers0
Validation of Spatial Models of Turbulent Flows During Preparation, Production, and Use of Chemical Fibers0
Method for Measuring the Braid Angle and its Deviation from the Specified Value in Braided Preforms Using Image Analysis0
Main Directions of Production Development and Strength Characteristics of Aramid Fibers in China, South Korea, and Russia in the 21ST Century. Review0
Effect of Drying and Heat Treatment on Functional Properties of Composite Textile Materials0
Analytical Estimate of Gelation Parameters for Spinning Chemical Fibers from a Polymer Solution0
Modeling and Prediction of Deformation Properties of Polymer Fibers for Parachute Cords0
Compressibility of Composite Materials Reinforced with Nonwoven Needlepunch Cloth Made of Polypropylene Fibers of Increased Linear Density0
Mathematical Modeling of Yarn Winding Tension0
Modeling Deformation Properties of Composite Polypropylene Threads Filled with Carbon Nanofibers0
Force Field Optimization in the Active Working Zones of Spinning Machines0
Calculation of Technological Parameters of Mixed-Batch Sunk-Loop Knit Fabrics0
Influence of Physical Fields on Extraction of Sodium Hydroxide from Cellulose Fibrous Materials0
Digital Modeling of Performance Processes of Polymer Textile Materials0
Application of Winding Technology in Various Industries0
Computer Prediction of Spectral and Energy Characteristics of Polymer Textile Fabrics0
Orientation of Fibers in Needle-Punched Nonwoven Fabrics0
Electrospinning of Nonwoven Materials for Alkaline Batteries0
Development of Digital Prediction Methods for Viscoelastic Processes of Polymer Textile Materials0
Mechanism of Sorption Processes in Sorbents Based on Pectinic Polysaccharides0
Determining Elastic, Viscoelastic and Plastic Deformation Components of Polymer Fibrous Materials0
Methods of Prediction of Relaxation Processes of Textile Elastomers for Implantology0
Highly Porous Block-Cellular Ceramic Filters for Cleaning Gases from Aerosols0
Water Permeability of Composite Material with Fibrous Filler0
Development of Recommendations for Designing Polymeric Textile Materials for Medical Purposes0
Influence of Bending Intensity on Stiffness of Textile Threads0
Modeling of a Gate Directing Forced Ventilation Air in an Intrafloor Convector for Increasing its Heating Capacity0
Microstructure Evolution of Bacterial Cellulose Gel-Films During Cultivation0
Use of Modern Means of Artificial Intelligence to Predict the Electrical Resistance of a Polymer Composite Filled with Anisometric Carbon Nanoparticles0
Methodology for Rating the Environmental Friendliness of Polymer Fibres and Textile Materials0
Deformation Operational Modes of Polymer Fibrous Materials and their Modeling0
On the Question of the DMF Content in Polyacrylonitrile Fibers Prepared by the Wet Method0
Electrical Conductance of Modified Carbon-Coated Fabrics0
Modeling of Deformation and Relaxation Processes of Polymer Yarn Products0
Preparation of Biologically Active Alginate Fibers with Controlled Release of Vancomycin0
Recycling Svetocopy Eco Paper0
Statistical Analysis of Ultimate Strength Values of Elementary Wool Fibre0
Mathematical Modeling Methodology for Viscoelastic Oriented Polymeric Materials0
Justification for the Choice of Polymer Binder for Composites Based on Reinforced Polypropylene Yarns0
Improving Protective Properties of Work Outfits Using Modern Materials0
Structure and Properties of Fiber-Filled Polyamide Composites Obtained by Polymerization Mixing of the Components0
Methods of Study of Deformation and Relaxation Properties of Polymer Marine Ropes0
Coefficients of Mass Conductivity During Polycaproamide Drying0
Influence of Carbon Nanotube Interactions on Mechanical Properties of High-Modulus Polymer Nanocomposites0
Biorefining of Wood-Fibre Raw Material in a Material Composition for Additive Technologies0
Modeling and Prediction of Deformation and Recovery Processes in Synthetic Yarns0
Effect of Synthetic Fiber on Physical, Mechanical, and Absorption Properties of Cellulose Composite Material0
Study of the Process of Hybrid Plush Knitwear Moistening0
Features of Preparing Composite Granules of Aluminum Foam Reinforced with Carbon Nanotubes0
Problems and Prospects for the Development of Textile, Light and Chemical Industries for the Production of Textile Fibres0
Digital Prediction of Deformation Modes of Functioning of Polymer Fiber Materials0
Multilayer Composites Based on PTFE Films and Fiberglass0
Jersey from Synthetic Yarns as a Construction Composite Filler0
Systemic Analysis of Deformation Properties of Polymer Textile Surgical Threads0
Qualitative Assessment of Deformation-Performance Properties of Polymer Textile Materials0
Semi-Physical Modeling of the Tension Stabilization System of Drawn Threads0
Comprehensive Study of Deformation Properties of Polymer Textile Materials0
Calculation of Heat and Mass Transfer Processes in a Heat Exchanger0
On the Thermophysical Properties of Carbon Graphite Materials0
Mechanical Properties of Needle-Punched Polymer Nonwoven Fabrics Under Constant Load0
Effect of the Enzyme Lipase on Delignification of Kraft Pulp0
Investigation of Physical and Mechanical Properties of Materials for Volleyball Knee Pads0
Qualitative Analysis Methodology for Operating Properties of Polymer Textile Materials0
Identification of Aramid Fibers by Thermal Analysis Methods0
Influence of Needlepunch Loom Operation Time on Physicomechanical Properties of Nonwoven Fabric0
Computer Prediction and Analysis of Functional Properties of Synthetic Textile Materials0
Microstructure of Fibers in a Feedstock Composition for Use in Additive Technologies0
Fabrics for Working Clothes Protecting from Sparks and Molten Metal Spatters0
Prediction of Strength Characteristics of Fiber-Reinforced Concrete Based on an Intelligent Analysis and Visualization of Multidimensional Data0
Effect of Textile Materials Blend Composition on Duration and Continuity of Manufacturing Process at its Organizational Preparation Stage0
Delignification of Kraft Pulp by Lipase0
Effect of Treatment of the Surface of Para-Aramid Fiber with Multiwall Carbon Nanotubes on Its Structure and Properties. Infrared Spectra0
Scenario Modeling and Optimization of Parametric Proportions for the Conjugated Production of Chemical Fibers and Textiles in Conditions of Raw Material Recycling0
Effect of Punch Density on Mechanical Properties of Needle-Punched Nonwoven Fabric Having High Surface Density0
Performance Analysis of Shell-and-Tube Heat Exchanger0
Methods for Increasing Accuracy of Numerical Prediction of Deformation Conditions of Performance of Polymeric Textile Materials0
Improved Accuracy of Modeling Relaxation–Operation Processes of Polymeric Textile Materials0
Preparation and Properties of Thermochromic Films of Polyacrylonitrile from DMF Solutions0
Determination of Irreversible Deformation for Numerical Prediction of Functional Processes of Geotechnical Nonwoven Materials0
Analysis of the Structure and Shape Stability of Felt Modified with Synthetic Latex0
Preparation of Polymer Composite Filled with Silver Nanoparticles and Investigation of its Antimicrobial Properties0
Mathematical Modeling of Relaxation Processes in Industrial-Use Polymer Textile Materials0
Methods for Visualization and Analysis of the Microstructure of a Fibrous Composite Material0
Digital Prediction of Elastic, Viscoelastic, and Plastic Deformations of Polymeric Textile Materials0
Simulation of Heat Transfer in Packages of Materials with Ventilated Air Gaps on the Example of Clothing for Greenhouse Workers0
Evaluation of the Degree of Reliability of Mathematical Modeling and Prediction of Viscoelastic-Plastic Processes of Polymeric Textile Materials0
Rheological Model of a Polymer Filament with Hidden Degrees of Freedom0
Polymer Textile Fiber Production Quality Control0
Assessment of Deformation and Operating Properties of Polymer Parachute Cords0
Influence of the Process Parameters of Obtaining Polikon Mosaic Membranes on Their Structure and Properties0
Finishing of Textiles with Microencapsulated Acaricidal and Repellent Compounds0
Development of New Functional Packages of Textile Materials with IR-Reflecting Properties for Ensuring Personal Safety in the Digital Epoch0
Use of Rare-Earth Metals to Dye Woolen Textile Materials0
Computer Prediction of Relaxation and Deformation Spectra of Polymeric Textile Materials0
Simulation of Internal Aerodynamics of Multi-Stage Inertial and Centrifugal Dust Collectors0
Drying and Heat Treatment of Fabrics with Polyurethane Coatings0
Qualitative Study of Performance Properties of Textile Elastomers Used in Implantology0
Investigation of a P-N-Transition Created by Pulsed Current in a Carbon Fiber0
Protective Properties of Knitted Fabrics from Combined Electroconductive Yarns0
Effect of Nitrogen Dioxide on Strength and Heat Resistance of Poly-p-Aramid Fibers0
Calculation of Activation Energy of Polymer Fiber Material Deformation Processes in Relaxation and Creep Modes0
Electric Resistance of Carbon Polyvinyl Alcohol Fibers0
Versions of Mutual Reversibility of Integral Cores of Relaxation and Creep of Polymer Textile Materials0
Preparation of Bicomponent Metal Nanoparticles for Giving Textile Materials Bactericidal Properties0
Optimization by a Response Surface Method of Delignification of Kraft Pulp Using Lipase Enzyme0
Calculated Prediction of Deformation−Operational Processes of Uniaxially Oriented Polymer Materials for Technical Purposes0
Evaluation of the Possibility of Using a Wood-Based Composite Material for Layered Formation of Items Considering Thermomechanical Properties0
Investigation of Structure and Mechanical Properties of Polypropylene Fabric for Reinforing Composites0
Use of Hydrophilic Nanoemulsions in Finishing Processes of Textile Materials0
Recommendations for the Modernization and Adjustment of Weaving Machines During the Production of High-Count Fabrics0
Spectral Analysis of Processes Using Geotextile Nonwoven Materials0
Use of Organosilicon Modifiers to Treat Nonwoven Absorbing Material0
Properties of High-Strength Aramid Fiber Textile Materials for Protective Clothing0
Comparative Analysis of Air-Permeability of Nonwovens Produced by Various Technologies from Secondary Polyester Fibers0
Natural Reinforcing Fillers for Polymeric Composite Materials. Review0
Synthesis of a Fiber-Forming Copolymer of Acrylonitrile in Dimethylsulfoxide0
Modeling and Prediction of Relaxation-Deformation Processes of Polymer Textile Materials0
Analytical Determination of Dependence of Full Gel Formation Time on Parameters of Fiber Making by Wet Method0
Effect of Initial Materials and Uncertainty of Production Technology on the Structure and Mechanical Properties of a Thermosetting Polymer0
Photomultiplier Based on a p–n Junction in a Carbon Fiber0
Comparative Evaluation of the Fibrous Composite Material Microstructure Using Digital Technologies0
Mechanical Properties of Moistened Needle-Punched Nonwoven Fabric Based on Blend of Fibers with Various Linear Densities0
Study and Modeling of Thermal Stretching of Polypropylene Composite Monofilament Filled with Carbon Nanoparticles0
Antimicrobial Preparations Based on L-Cysteine, Silver Acetate, and PHMG-HC for Impregnation of Chemical Fibers and Textiles0
Prediction of the Kinetics of Target Substance Separation from a Collection of Encapsulated Polydispersed Granules0
Ion-Plasma Pretreatment of Novolac Phenolformaldehyde and Polyester Fibrous Systems0
Properties of Agarose – a Polysaccharide from Marine Red Algae0
Correlation of Breaking Elongation and Linear Density of a Fiber Obtained from Ultrarhigh-Molecular-Weight Polyethylene Gel with Its Strength Indicators0
Modeling the Active Fragment of a Catalyst in a Polyacrylonitrile Matrix0
Parametric 3-D Modeling of a Rotary Mixer for Mixing Granules of Thermosoftening Plastic Materials0
Simulation of Deformation Processes in Polyester Twisted Yarns0
Atomic-Force Microscopy Study of Cotton Cloth Modified by Silver Nanoparticles0
Digital Prediction of High-Rate Stretching of Polymer Textile Materials0
New azo Dyes Based on 1,3-dihydroxynitrobenzene and 2,4,6-trihydroxynitrobenzene for Polycaproamide Fibers0
Application of Mathematical Statistics Methods in System Analysis of Factors Affecting Properties of Film Yarns0
Spectral Analysis of Deformation and Recovery Operation Modes of Polymer Nonwoven Materials0
Maxwell Model Parameters for Single Filaments of Aramid, Glass, and Basalt Fibers0
Strength Determination Errors in Synthetic Thread Doublings0
Use of Plasma Treatment to Increase the Seam Strength of Protective Clothing Made of Composite Material0
Modeling and Digital Prediction of Viscoelastic Properties of Marine Polymer Ropes0
Structural Design Concepts and Research Methods for Multidimensional Dynamic Objects with Complex Zones of Fibrous Material Deformation0
Modeling of Creep Processes in Industrial-Use Polymer Textile Materials0
Mathematical Modelling of Friction Winding of Large-Dia Meter Packages on a Translationally Moving Hanger0
Study of Nonwoven Fabric Forming Process on Lap Formair Technological Line0
Development of Qualitative Analytical Methods for the Performance of Aramid Textile Materials0
Method for Producing Nonwoven Fabrics Based on Arcelon Fibre for Filtering Air Mixtures0
Spectral Simulation of Performance Processes of Polymeric Textile Materals0
0.12008094787598