IEEE Transactions on Magnetics

Papers
(The median citation count of IEEE Transactions on Magnetics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-06-01 to 2025-06-01.)
ArticleCitations
Coupled-Mode Theory for Graphene-Based Metasurfaces390
Anisotropic Congruency-Based Vector Hysteresis Model Applied to Non-Oriented Laminated Steels331
Lumped Radial Force Characteristics Reconstruction for Switched Reluctance Machines Through Scaling Flux-Linkage Characteristics81
Topology Optimization of a Surface Permanent Magnet Motor With High Torque Density78
Computation of Core Losses in Electrical Steel Laminations With Impacts of Normal Flux and PWM Switching Considered74
Notice of Removal: Study on Oxidation Process of Sm(Co0.6Cu0.08Fe0.3Zr0.02)8.35 Magnetic Powders73
Modeling and Analysis of Stress Sensitivity and Changing Trend of Magnetization Characteristics of GO Silicon Steel Cut Along Different Angles to the Rolling Direction54
Influence of Mechanical Stresses Noncoaxial With the Magnetizing Field on the Relative Magnetic Permeability of Electrical Steel54
Torque-Ripple-Mitigated Model-Free Predictive Current Control With Extended Control Set for PMSMs50
Particle Swarm Optimization With Varied Social Network for Reliable Parameter Estimation in Thermal Analysis of Electrical Machines48
Research on a Cell Proliferation Model Based on A549 Cell Line With Magnetic Field Stimulation44
1 Bit Non-Diffractive Vortex Beam Generator Based on FSS in Microwave Region40
Analytical Analysis of Electromagnetic Torque and Magnet Utilization Factor for Two Different PM Machines With SPM and HUPM Rotor Topologies36
Monotone Signal Localization Using Magnetoresistive Sensor Array for Low-Field Magnetic Particle Imaging34
Magnetic Domain Observation of Milled Nanocrystalline Alloy Powder33
Comparison of Two Analytical Methods for Calculating Cogging Torque Based on Homopolar Inductor Machines31
Angular Remanence and Anisotropy Orientation Distribution in Nickel Films on LiNbO330
The Effect of Coil-to-Cortex Distance and Induced Electric Field Strength on Resting Motor Thresholds in Schizophrenia Patients30
Coupled Electromagnetic and Hydrodynamic Modeling for Semiconductors Using DGTD29
Simultaneous Thermo-Magnetorheological Response of Magnetorheological Fluids: Effect of Concentration and Composition29
Electrically Controllable Exchange Bias via Interface Magnetoelectric Effect29
Enhancement of a Diffracted Beam in a Domain–Wall–Motion-Type Light Modulator Array27
Field-Free Mutual Synchronization of Parallel Coupled Spin Torque Nano Oscillators Using a Free Layer With First- and Second-Order Uniaxial Anisotropy26
Design and Test Analysis of Small-Scale Direct Current Superconducting Current-Limiting Switch Prototype26
Zero-State Insert Dual-Layer HAMR Media Recording26
Field Computation in Media Exhibiting Hysteresis Using Hopfield Neural Networks26
Utilizing Helicoidal and Translational Symmetries Together in 2-D Models of Twisted Litz Wire Strand Bundles25
Study on the Adsorption and Thermal Diffusion of D-4OH Lubricant on Amorphous Carbon Film by Reactive MD Simulation for HAMR25
Fast Writing Strategy of STT-MRAM With Pipeline Architecture24
Study on Magnetic Properties of Toroidal Cores Composed by Electrolytic Iron Powder With Different Shapes24
Table of contents23
Study on the Magnetoresistance Caused by Orbital Angular Momentum23
Magnetic Properties Analysis of Novel Composite Magnetic Materials for HSPMSMs23
IEEE MAGNETICS SOCIETY23
Introducing IEEE Collabratec23
Modeling and Calculation of Core Loss and Heat Distribution in Ultra-Thin Wound Core Reactor Based on Electromagnetic and Fluid-Thermal Coupling23
Prediction of the Magnetic State of Ferromagnetic Objects by Assimilating Data into a Physical Model22
Table of Contents22
Table of Contents22
Introducing IEEE Collabratec21
Table of Contents21
Table of Contents20
IEEE Transactions on Magnetics Institutional Listings20
Analysis of Rotor Eccentricity Fault in IPMSM With Different Armature Winding Structures19
All-Optical Switching: A Path to Recording Technology Beyond HAMR19
Global Magnetic Field Distribution and Open Water Hydrodynamic Performance of a Flux-Modulated Rim-Driven Thruster19
Modeless Prediction of Variable Coupling Effect for Multiple-Load Wireless Power Transfer19
Design Optimization of Spoke-Type Flux-Intensifying PM Motor With Asymmetric Rotor Configuration for Improved Performance19
High-Density STT-Assisted SOT-MRAM (SAS-MRAM) for Energy-Efficient AI Applications19
2-D Analytical Model for Computing Eddy-Current Loss in Nonlinear Thick Steel Laminations18
Temperature Dependence of the Dzyaloshinskii-Moriya Interaction in Pt/Co/Gd Thin Film18
Optimized Design of Sub-Harmonic Synchronous Machines18
IEEE Magnetics Society Information18
Wideband Multiple Bessel Beams With Desired Directions and Energy Distribution Proportion Based on Time Reversal and Genetic Algorithm in Microwave18
A Versatile Simulation-Assisted Layered Mesh Analysis for Generalized Litz Wire Performance18
Low Torque Ripple and High Torque Trapezoidal Permanent Magnet Bi-Directional Magnetic Field Modulation Motor by Magnetomotive-Force-Oriented Design18
Introducing IEEE Collabratec18
A Magnetic Network Model and Harmonic Analysis of a Canned Switched Reluctance Machine18
Determination of Anisotropy Ratio κ/μ for Symmetric Three-Port Circulator Using Transmission Line Equivalent Model18
Pseudo-Direct-Drive Electrical Machine for a Floating Marine Turbine17
Magnetic Force Calculation in Reluctance Force Launcher17
IEEE Transactions on Magnetics Publication Information17
A Special Magnetic Coupler Structure for Three-Coil Wireless Power Transfer: Analysis, Design, and Experimental Verification17
Cycloidal Reluctance Magnetic Gears for High Gear Ratio Applications17
FE-GRN Neural Network in Hard Disk Failure to Optimize Detection for Enhanced Reliability17
Novel Magnetic Flux Guiding Structure of Magnetoresistive Sensor for Increased Sensitivity17
Optimization of Force-to-Weight Ratio of Ironless Tubular Linear Motors Using an Analytical Field Calculation Approach16
From Košice to the Orbit: A Successful Story of Applied Magnetism16
3-D Printed Inductive Displacement/Force Sensor16
IEEE Transactions on Magnetics Institutional Listings16
Multilayer Gradient Perforated Radar Absorbing Structure for Stealth Applications16
A Comparison Study of Spin-Transfer Torque- and Spin-Orbit Torque-Based Stochastic Computing Using Computational Random Access Memory (SC-CRAM)16
Optimization and Comparison of 1MW-Class PM Motors for Aircraft Propulsion Using Litz Wire and Hairpin Windings16
Analytical Modeling, Optimization, and Electromagnetic Performance Analysis of Electrically Excited Flux Switching Motor16
Numerical Analysis of DC-Biased Eddy Current Sensor Considering Hysteresis Effects16
Inverse Design of Magnetic Fields Using Deep Learning16
Open-Phase Fault Modeling for Dual Three-Phase PMSM Using Vector Space Decomposition and Negative Sequence Components16
IEEE Transactions on Magnetics Institutional Listings16
IEEE Transactions on Magnetics publication information15
TechRxiv: Share Your Preprint Research with the World!15
IEEE Magnetics Society Information15
Table of Contents15
Table of Contents15
Introducing IEEE Collabratec15
IEEE Transactions on Magnetics Institutional Listings15
Front Cover15
Table of Contents15
Table of Contents14
Design of a Width Slim Linear Vibration Motor Used for Automotive LCD Panel14
Fatigue Propagation Analysis of Crack Failure in High-Power IGBT Solder Based on Multiphysics Coupling Model and XFEM14
Sub-nT Resolution of Single Layer Sensor Based on the AMR Effect in La2/3Sr1/3MnO3 Thin Films14
Experimental Study on the Leak Mechanism of the Ferrofluid Seal in a Water Environment14
[Front cover]14
A GPU-Accelerated Semi-Implicit Method for Large-Scale Nonlinear Eddy-Current Problems Using Adaptive Time Step Control14
Table of Contents14
Grain-Boundary Structures and Evolution in an Nd-Fe-B Sintered Magnet14
Design and Analysis of a Partitioned-Stator Hybrid Excited Permanent Magnet Arc Motor14
Dependence of the Threshold Field Intensity of Ferrite Films on Intrinsic Damping and Secondary Microwave Signal14
IEEE Transactions on Magnetics Publication Information14
A Simplified 2-D Equivalent Model for Magnetic Wire Array14
Multi-Objective Automatic Design of Permanent Magnet Motor Using Monte Carlo Tree Search14
Analytical Modeling of Equivalent Air-Gap Length and Inductance Calculation of Interior Permanent Magnet Motors14
IEEE Transactions on Magnetics Publication Information14
Development of a tri-axis concentric fluxgate magnetometer with high orthogonality and high linearity14
A Study on Reducing Cogging Torque of IPMSM Applying Rotating Tapering14
Anti-Demagnetization Analysis of Fractional Slot Concentrated Windings Interior Permanent Magnet Motor Considering Effect of Rotor Design Parameters14
Robust Magneto-Ionic Effect in Fe/FeO x Thin Films in Electrolytes With Different Cations14
Valence Band Dispersion in Bi-Doped (Ga,Mn)As Epitaxial Layers14
Effect of Magnetic Interactions on Magnetic Remanence in a Fine Particle System14
Introducing IEEE Collabratec14
Investigation of Balanced Bidirectional-Magnetization Effect of a Novel Hybrid-Magnet-Circuit Variable-Flux Memory Machine13
Repeatability of Tests for Validation of Iron Loss Models in Electrical Machines13
Gyrotropic Modes of Ferromagnetic Resonance in System of Two Exchange-Coupled Magnetic Vortices13
Advanced Design of PWM Inverter Fed Permanent Magnet Motors13
A Novel 3-D Mathematical Modeling Method on the Magnetic Field in Nutation Magnetic Gear13
Quasi-Equilibrium Stoner–Wohlfarth Versus Strongly Out-of-Equilibrium Dynamics in HAMR13
Effects of Nb Content on the Microstructure and Magnetic Properties of the Sm₁.₂Zr₀.₂(Fe₀.₈Co₀.₂)₁₁.₅-ₓ Ti₀.₅Nbₓ (x=0 –0.4, at.%) Alloys13
Examination of Thinning Inspection Method for Ferromagnetic Steel Tubes Using Velocity Effect of Static Magnetic Field13
Realization of Different Anisotropy Direction for Each Thin-Film Magnetoimpedance Element on the Same Substrate13
Comparative Study of Field Modulation Effects in Consequent-Pole PM Machines With Different Stator Slot Configurations13
The Effect of Temperature and Film Thickness on Domain Wall Energy Density, Coercivity Force, and Magnetostriction of Galfenol Films13
Model Order Reduction of Cage Induction Motor With Skewed Rotor Slots Using Multiport Cauer Ladder Network Method13
Effect of MgO Grain Boundaries on the Interfacial Perpendicular Magnetic Anisotropy in Spin-Transfer Torque Magnetic Random Access Memory: A First-Principles Study13
Design of Non-Isolated Modulation Code With Minimum Hamming Distance of 3 for Bit-Patterned Media-Recording Systems13
A Novel Slot PM-Assisted Hybrid Magnet Memory Machine13
Topology Optimization of Microstrip Lines With Experimental Validation13
Sensitivity Focusing Through Coil Angle Variation in Eddy Current Testing13
IEEE Transactions on Magnetics Publication Information12
Topology-Parameter Hybrid Optimization of Skewed Permanent Magnet Motor12
Anomalous Loss and Hysteresis Loop in Electrical Steel Sheet12
CGO-Driven Design of Magnetic Material and Plasma Integrated Next-Generation Broadband Pyramidal Microwave Absorber12
Development of Magneto–Thermo–Mechanical Analytical Models for High-Speed Induction Machine12
Effects of Transcranial Direct Current Stimulation on Stroke Based on Brain Functional Networks12
Magnetic Sensors for Magnetic Communication: A Comparison Between Giant Magneto-Impedance (GMI) and Induction-Based Sensors12
Analysis of Magnetomechanical Properties at the Tooth–Yoke Embedding Position in Grain-Oriented Electrical Steel Electric Motors12
Thin-Wire Integral Equation Formulation With Quasistatic Darwin Approximation12
Residual Stress Monitoring in Magnetostrictive Cylinders and Tubes12
Effect of Tension and Compression Stress on the Magnetic Losses in a Low-Carbon Steel12
Novel Multiple Magnetic Source Axial Flux Modulation Machines for Aviation Propulsion Applications12
High-Frequency Losses Calculating Model for Magnetostrictive Materials Considering Variable DC Bias12
Magnetic Field Analysis of Coplanar Coils and Linear Magnetic Materials Using the Equivalent Permanent Magnetization and Magnetic Scalar Potential12
A Low-Frequency Eddy Current Probe Based on Miniature Fluxgate Array for Defect Evaluation in Steel Components12
Limitations of the Two-Step Darwin Model in Frequency Domain12
Truncation Error Formula for Multi-Port Cauer Ladder Networks12
Improvement of CNN-Based Anisotropic Magnetostatic Field Computation via Adaptive Data Subset Selection12
Eddy-Current Field Analysis in Laminated Iron Cores Using Multi-Scale Model Order Reduction12
Time-Resolved Observations of a Surface Domain Wall Distortions Induced by Torsion in Amorphous Glass-Coated Microwires12
Dual Induction Eddy Current Probe for Vibration Noise Reduction11
Calibration of a Coil Array Geometry Using an X-Ray Computed Tomography11
Magnetically Geared Propulsion Motor for Subsea Remote Operated Vehicle11
IEEE Transactions on Magnetics Institutional Listings11
IEEE Magnetics Society Information11
Visual Interpretation of Topology Optimization Results Based on Deep Learning11
Multimode Excitation Analysis and Design of a New Hybrid Excited Modular Stator Permanent Magnet Switched Reluctance Machine11
Implementation of ENG Metasurfaces for 5G Antenna Systems11
Parallel-in-Space-and-Time Finite-Element Method for Time-Periodic Magnetic Field Problems With Hysteresis11
Macroscopic Modeling of Mn–Zn Ferrites Based on Analytical Dynamic Material Models11
MagAnalyst: A MATLAB Toolbox for Anhysteretic Magnetization Analysis11
Introducing IEEE Collabratec11
Design of Transcranial Magnetic Stimulation Coils for Mouse With Improved Stimulus Focus and Intensity11
Improvement on Loss Separation Method for Core Loss Calculation Under High-Frequency Sinusoidal and Nonsinusoidal Excitation11
Analysis of a Magnetostrictive Harvester With a Fully Coupled Nonlinear FEM Modeling11
Transient Modeling of Induction Machine Using Artificial Neural Network Surrogate Models11
IEEE Transactions on Magnetics publication information11
Correction to “Theoretical Analysis of Gap Potential Functions and Corner Saturation in 2-D, Symmetric Magnetic Recording Heads With Tilted Gap Corners” [Dec 16 1-11]11
IEEE Transactions on Magnetics Institutional Listings11
Research and Analysis of Toroidal and Conventional Windings in Permanent Magnet Synchronous Machine11
Non-Volatile Latch Compatible With Static and Dynamic CMOS for Logic in Memory Applications10
Spinor Formulation of the Landau–Lifshitz–Gilbert Equation With Geometric Algebra10
Mutual Inductance Modeling of Two Coaxial Solenoid Antennas With Large Ferrite Core for Underground RFID Applications10
Research on Torque Performance of a Traction Motor by Using Fe-Co-V Soft Magnetic Alloys10
Machine Learning-Based Prediction Models for Magnetic Hyperthermia10
Measurement of Magnetic Field Induced by Spin-Accumulated Electrons in a FeCoB Nanomagnet10
Design Methodologies for Variable-Flux Machines With Extra Torque–Speed Range10
Magnetic Energy Minimization for Suppressing Magnetic Field Intensity of Inductive Power-Transfer Systems10
Stator Magnet Analysis for a Novel Magnetic Levitation Actuator10
Theoretical Investigation on the Linear Location Algorithm of the Magnetic Gradient Tensor Ranging by Use of Cuboid Triaxial Magnetometer Array10
Boundary Integral Equation Method for Compensating Magnetostatic Fields of Thin Shells10
Performance Prediction of a Ferrite-Assisted Synchronous Reluctance Machine Considering Different Control Strategies Using Open-Source Finite Element Analysis10
Track Mis-Registration Estimator Based on K-Means Algorithm for Bit-Patterned Media Recording10
A New Optimized IPMSM for EVs With Reduced Magnet Loss for Over-Modulation Operation10
CRP: Conditional Replacement Policy for Reliability Enhancement of STT-MRAM Caches10
Novel Wedge-Less Stator to Reduce Shaft Voltage in IPMSM for EV Propulsion Considering Manufacturability10
Anisotropic FMR Peak Widths in Fe-Co Single Crystal Thin Films10
IEEE Magnetics Society Distinguished Lecturers for 202210
Magnetic Field Sensor Based on Magnetic Torque Effect and Surface Acoustic Wave With Enhanced Sensitivity10
Table of contents10
Influence of Preparation Conditions on Long-Term Stability of Magnetoresistive Properties of Nanostructured La–Sr–Mn–Co–O Films Grown by PI MOCVD10
Magnetic and Transport Properties of Multicomponent Laves Phase Intermetallic Compound Gd0.2Tb0.2Dy0.2Ho0.2Er0.2Al210
TDMR With Machine Learning Data Detection Channel10
Anisotropic Mesh Adaptation Based on Error Estimation for 3-D Finite-Element Simulation of Electromagnetic Material Processing10
Assessment of the Impact of Static Field Inhomogeneity on the Performance of Miniaturized NMR Devices10
Propagation Characteristics of End-Winding Insulation Fatigue Damage in Variable Frequency Motor Under Multi-Field Coupling10
An Edge-Based Smoothed Finite Element Method for Magnetic Field Analysis in Permanent Magnet Motors10
Compensating Low-Frequency Signal with Indirect Current Feedback in Rectangular Wave Eddy Current Testing Using Tunnel Magnetoresistive Sensor10
Generation of Unmeasured Loading Levels Data for Condition Monitoring of Induction Machine Using Machine Learning10
IEEE Transactions on Magnetics publication information10
Effective Medium Transformation: The Case of Eddy Currents in Laminated Iron Cores10
Design of a New Consequent-Pole Segmented Dual-Stator Permanent Magnet Machine10
Optimal Sensor Placement via Parameterized Background Data Weak Method Applied to Magnetostatic Problems Including Anisotropy10
Open circuit magnetic field calculation of the V-shaped interior PM machine with non-uniform air-gap10
Study of Resistivity Distribution in Modified Surface Steel9
Table of Contents9
Ultrafast Ferromagnetic Spin Switching by a Single Pair of Optical Pulses9
Magnetic and Thermal Modeling of Hollow Conductors for Improved Cooling and Force Density of Coreless Linear Motors9
Permanent Magnet Synchronous Reluctance Machines With Axially Combined Rotor Structure9
Impedance Variation of an Induction Coil Near the Edge of a Right-Angled Steel Wedge9
Optimal Selection of Angular Input Data for the ODF-Based Model Applied to B–H Magnetization Curves of Grain-Oriented Electrical Steels9
Research on Environmental Magnetic Field of Two-Pole Permanent Magnet Motor Considering Cogging9
Front Cover9
Magnetomechanical Multiscale Hysteresis Model of Electrical Steel Sheets in the Finite Element Simulation of a Transformer9
An Investigation Into Magnetic Properties, Sintering Shrinkage Characteristics, and Formability of Isotropic Barium Ferrite Permanent Magnets9
Table of Contents9
Discovering Pareto-Optimal Magnetic-Design Solutions via a Generative Adversarial Network9
Proper Generalized Decomposition With Cauer Ladder Network Applied to Eddy Current Problems9
Union Bound Analysis for Spin-Torque Transfer Magnetic Random Access Memory (STT-MRAM) With Channel Quantization9
IEEE Transactions on Magnetics Institutional Listings9
Homogenization Method Based on Cauer Ladder Network Representation of Unit Cell9
A Fast Calculation Approach for Pressure Finger Losses in Large Salient-Pole Synchronous Machines9
Self-Writing xnor Magnetic Random Access Memory for Binary Neural Network Acceleration9
Self-Generation of Spatiotemporal Parametric Patterns in Active Ring Resonators Based on Single- and Bicomponent Magnonic Quasicrystals9
Reduction of Torque Ripple and Rotor Eddy Current Losses by Closed Slots Design in a High-Speed PMSM for EHA Applications9
Optimization Method for Magnetic-Head Positioning Control System in HDD Against Unexpected Plant Perturbations by Using Data Mining Techniques9
Analysis of the Excess Loss in High-Frequency Magnetization Process Through Machine Learning and Topological Data Analysis9
Comparison of Parallel-in-Space-and-Time Finite-Element Methods for Magnetic Field Analysis of Electric Machines9
Comparison of Hyper-Reduction Methods Combined With POD: Model Order Reduction of a Squirrel Cage Induction Machine in Nonlinear Case9
Front Cover9
IEEE Magnetics Society Information9
Error Estimator for Cauer Ladder Network Representation9
Enhancement of Gyration Effects by Dysprosium-Doped Ferrite/Piezoelectric Magnetoelectric Gyrators9
Comparative Study of Novel Doubly Fed Doubly Salient PM Machines With Different Stator/Rotor-Pole Number Combinations9
IEEE Transactions on Magnetics Institutional Listings9
Parameter Estimation Method for Dual-Stator Permanent Magnet Synchronous Motor Based on Incremental Inductance9
Development of Ultra-Thin CoPt Films With Electrodeposition for 3-D Domain Wall Motion Memory9
Analysis of Pulsating Magnetic Fields in a Parallel Stator Winding Eccentric Rotor Induction Motor9
An Energy-Saving Series Elastic Actuator With Variable Torque-Speed Characteristics Using Reconfigurable Epicyclic-Driven Actuation9
Efficient Spin-Orbit Torque Magnetization Switching With Low Current Density in Crystalline Ferromagnetic Semiconductor9
IEEE MAGNETICS SOCIETY9
A 3-D Boundary Element Source Method for Anisotropic Objects embedded in Isotropic Background Medium9
BEM Computation of the Internal Impedance of Air-Core Inductors Enforcing High-Order Surface Impedance Boundary Conditions9
Front cover9
Evaluation of Sensor and Analysis Area in the Signal Source Estimation by Spatial Filter for Magnetocardiography9
Parallel Computing of 3-D FEA Including Matrix Preconditioning for Analysis of Rotating Machines Coupled With Circuit Equations9
Enhanced Technique for Metascreens Using the Generalized Finite Element Method9
The Scaling Capability of Heat Assisted Magnetic Recording9
Table of contents9
Compact Wireless Motor Drive Using Orthogonal Bipolar Coils for Coordinated Operation of Robotic Arms8
Tuning Texture and Magnetic Properties of Bulk Pr2Fe14B/α-Fe Nanocomposite Magnets via Cu Addition8
Design Optimization of Rotor Bridge and Fixing Hole for Spoke-Type PMSM8
A Low-Equivalent Magnetic Noise and High-Sensitivity Magneto-Electric Coupling Sensor Based on Series Structure8
0.24451589584351