Inorganic Materials

Papers
(The TQCC of Inorganic Materials is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
Inorganic Materials for Regenerative Medicine25
Optical Fluoride Nanoceramics23
Synthesis and Physicochemical Properties of Nanostructured TiO2 with Enhanced Photocatalytic Activity17
X-ray Photoelectron Spectroscopy Study of Indium Tin Mixed Oxides on the Surface of Silicate Glass16
Lithium Rare-Earth Fluorides As Photonic Materials: 1. Physicochemical Characterization15
Extraction of Cesium and Strontium Cations from Solutions by Titanium(IV) Phosphate-Based Ion Exchangers14
Synthesis and Properties of Manganese-Containing Calcium Phosphate Materials14
Lithium Rare-Earth Fluorides as Photonic Materials: 2. Some Physical, Spectroscopic, and Lasing Characteristics13
Nanoscale Single-Crystal Silicon Carbide on Silicon and Unique Properties of This Material11
Growth and Spectroscopic and Magnetic Properties of TbCr3(BO3)4 Crystals9
LiFePO4/Carbon Nanomaterial Composites for Cathodes of High-Power Lithium Ion Batteries9
Electro- and Magnetoactive Materials in Medicine: A Review of Existing and Potential Areas of Application9
General Trends of Structure Formation in Graded Composite Materials Based on the Ti3AlC2 MAX Phase on Titanium8
Mechanical Properties and Thermal Shock Resistance of Fine-Grained Nd:YAG/SiC Ceramics8
Mechanism of the Conversion of γ-Аl2О3 Nanopowder into Boehmite under Hydrothermal Conditions8
Growth and Characterization of a Boron-Doped Lithium Niobate Single Crystal8
Correlation between the Chemical Composition, Crystal Structure, and Magnetic Properties of Hexagonal Barium Ferrite with Zn2+ Heterovalent Substitution8
Physicochemical Properties and Osseointegration of Titanium Implants with Bioactive Calcium Phosphate Coatings Produced by Detonation Spraying7
Structural and Morphological Characteristics and Dissolution Behavior of Carbonate Hydroxyapatite Prepared in the Presence of Proline7
Thermal Conductivity of Sr1 – xBaxF2 Single Crystals7
Transition of Metastable Pyrrhotites to a Stable Phase State7
Synthesis and Ionic Conductivity of Lithium Titanium Phosphate-Based Solid Electrolytes7
Cathode Materials Based on Lithium Iron Phosphate/PEDOT Composites for Lithium-Ion Batteries7
Chemical Binding of Carbon Dioxide on Zinc Oxide Powders Prepared by Mechanical Milling7
Temperature Dependence of the Diffusional Peclet Number in Sublimation of Some Simple Substances7
Structural Characteristics of Thin Sr0.5Ba0.5Nb2O6 Films in the Temperature Range 20–500°C7
Optical Properties of Molybdates Containing a Combination of Rare-Earth Elements7
Effect of Mechanical Activation of Iridium on Its Reaction with Refractory Carbides6
Multiferroic Nanocrystals and Diluted Magnetic Semiconductors as a Base for Designing Magnetic Materials6
Effect of the Synthesis Method on the Phase Composition and Magnetism of Layered Double Hydroxides6
Phase Equilibria in the NaF–NaCl–NaBr–Na2CrO4 System6
Phase Relations and Behavior of Carbon-Containing Impurities in Ceramics Prepared from Mechanically Activated Ln2O3 + 2HfO2 (Ln = Nd, Dy) Mixtures6
Synthesis, Thermal Expansion Behavior and Sintering of Sodium Zirconium Nickel and Calcium Zirconium Nickel Phosphates6
High-Strength Tetragonal Zirconia/Alumina Ceramic Composites Containing Strontium Hexaaluminate6
Synthesis, Composition, and Magnetic Properties of Cadmium-Doped Lanthanum Ferrite Nanopowders6
Effect of Grain Size and Pb Doping on the Thermoelectric Properties of Extruded Samples of the Bi0.85Sb0.15 Solid Solution6
Lithium Cobalt Titanate with the Spinel Structure as an Anode Material for Lithium Ion Batteries6
Ferrite-Based Solid Solutions: Structure Types, Preparation, Properties, and Potential Applications6
Separation Factors and Peclet Numbers in Evaporation Refining of Elemental Substances near Their Melting Point6
Controlling the Sorption Activity of Clinoptilolites with Mechanical Activation6
Adsorptive and Photocatalytic Properties of Tungsten-Modified Titanium Dioxide6
Resistivity of Fe–Mn–C Melts5
Study of Characteristics of Composite Materials Based on B83 Antifriction Alloy5
Growth and Thermophysical Properties of RAl3(BO3)4 (R = Y, Nd, Gd, Lu) and RMgB5O10 (R = Y, La, Gd) Crystals5
Radiation Resistance and Hydrolytic Stability of Y0.95Gd0.05PO4-Based Ceramics with the Xenotime Structure5
Investigation of Viscosity and Activation Energy Relations from Alkali Oxide Content in Lithium Boron Melts5
Heat Capacity and Thermal Expansion of Samarium Hafnate5
Synthesis of Titanium Trichloride5
Ceramics Based on CaSO4⋅2H2O Powder Synthesized from Ca(NO3)2 and (NH4)2SO45
Effect of Laser Perforation of Elements of a Diffusion-Bonded Ceramic–Copper–Ceramic Joint on Its Mechanical Properties5
Effect of Plastic Deformation and Subsequent Heat Treatment on the Acoustic and Magnetic Properties of 12Kh18N10T Steel5
Structural Changes in Palladium Nanofilms during Thermal Oxidation5
Determination of the Complex Refractive Index of Nanoparticulate Magnetite from Optical Anisotropy Data for Magnetic Colloids5
Thermophysical Properties of Single Crystals of CaF2–SrF2–RF3 (R = Ho, Pr) Fluorite Solid Solutions5
Synthesis and Phase Transformations of Compounds in the Mg4Na(PO4)3–Mg3(PO4)2 System as Promising Phases for the Fabrication of Bioceramics5
Phase Relations in the Rb2MoO4–R2(MoO4)3–Zr(MoO4)2 (R = Al, Fe, Cr, Y) Systems5
Solid-State Synthesis of Nanocrystalline Gadolinium Zirconate Using Mechanical Activation5
Effect of Multidirectional Isothermal Forging on the Formation of Ultrafine-Grained Structure in Alloy 1570C5
Kinetics of Formation and Crystallization of Ln2Ti2O7 (Ln = Gd, Lu) Pyrochlores from Nanoparticulate Precursors5
The Concentration Quenching of Photoluminescence and the Quantum Yield in (Y1–xPrx)2O2Se Solid Solutions5
Calculation and Experimental Estimation of the Role of the Frequency Ratio in Changing the Durability at Two-Frequency Deformation Modes5
Phase Formation, Structure, and Dielectric Properties of Modified Potassium Sodium Niobate Ceramics4
On Deviations from Vegard’s Law at Increasing Pressure in Alloys4
Structure and Mechanical Characteristics of a Laminated Ti3AlC2 MAX Phase-Based Composite Material Prepared by a Free Self-Propagating High-Temperature Synthesis Compression Method4
Magnetic Properties and Critical Currents of the Superconducting Rhodium Borides YRh4B4 and HoRh3.8Ru0.2B44
Surface Morphology and Composition of a NbC/C Composite Studied by Scanning Electron Microscopy and X-Ray Photoelectron Spectroscopy4
Properties of Nickel Zinc Ferrite Nanopowders Prepared by Different Methods4
Effect of Heat Treatment on the Structure and Optical Properties of Porous Anodic Titanium Oxide Films4
Heat Capacity and Thermal Expansion of Terbium Hafnate4
Deformation Features of the Propagation of Cleavage Cracks in a Ferritic-Pearlite Microstructure in the Ductile to Brittle Transition Interval4
Lamp Processing of the Surface of PdCu Membrane Foil: Hydrogen Permeability and Membrane Catalysis4
Grain Size Reduction in a TiC–Co Material during SHS Extrusion4
Effect of Titanium Additions on the Corrosion and Electrochemical Properties of Aluminum Alloy AB14
Self-Propagating High-Temperature Synthesis in the Ti–Al–Si System4
Size and Magnetic Characteristics of YFeO3 Nanocrystals4
Effect of CaO–Al2O3 (48 : 52 wt %) Sintering Aids on the Phase Composition and Properties of Si3N4-Based Ceramics4
Nanotubular Nickel Hydrosilicate and Its Thermal Annealing Products as Anode Materials for Lithium Ion Batteries4
Preparation and Characterization of Lithium Niobate Single Crystals Doped with Zinc and Erbium4
Low-Temperature Synthesis of Compounds with the Pyrochlore and Hexagonal Tungsten Bonze Structure4
Thermal Conductivity of Single Crystals of CaF2–BaF2 Solid Solutions4
Synthesis, Structure, and Properties of Zirconia-Modified Aluminosilicate Glass-Ceramics4
X-Ray Fluorescence Determination of Ore Elements in Ferromanganese Formations4
Synthesis, Properties, and Visible Light Photocatalytic Activity of Nonstoichiometric Titanium Dioxide-Based Composites4
Adsorptive and Photocatalytic Properties of Molybdenum-Modified Titanium Dioxide4
Influence of Substrate Temperature and Hydrothermal Treatment on the Phase Composition of Plasma-Sprayed Phosphate Coatings4
Growth and Properties of Y3Fe5O12 Films on LiNbO3 Substrates4
Synthesis and Magnetic Properties of Silver-Doped Iron Dichromium Tetrasulfide4
KLa(SO4)2–CaSO4 System4
Preparation and Thermoelectric Properties of Microcrystalline Lead Telluride4
Phase Equilibria in the Ternary Reciprocal System Na+,Ba2+||Br–,$${\text{SO}}_{{\text{4}}}^{{2 - }}$$4
Estimating the Degree of Unipolarity of LiNbO3 Crystals Using Static and Dynamic Piezoelectric Measurements4
Synthesis and Thermal Oxidation Stability of Nanocrystalline Niobium Diboride4
High-Speed Multichannel MAES Analyzers Based on BLPP-2000 and BLPP-4000 Photodetector Arrays4
Films of (Gd1 –xTbx)2O2S Solid Solutions Produced by Oxide Sulfidation in NH4SCN Vapor and Their Optical Properties4
Determination of Rare Impurities in High-Purity Germanium and Germanium Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry3
Methodological Approaches to Calculating Key Validation Parameters of Forensic Methods3
Monitoring the Fractional Distillation Purification of Inorganic Hydrides by Diode Laser Absorption Spectroscopy3
Nitrogen Doping of Carbon Nanotubes Synthesized in Flowing Acetylene and Ammonia3
Carbosilicothermic Synthesis of Ti3SiC2–TiB2–SiC Ceramic Composites from Leucoxene Concentrate3
Preparation and Properties of Stable Suspensions of ZrO2–Y2O3 Powders with Different Particle Sizes for Electrophoretic Deposition3
Preparation and Characterization of Gadolinium Niobate Tantalates Activated with Europium Ions3
Effect of Composition on the Structure and Properties of MgO/Y2O3 Composite Ceramics3
Magnetic Characteristics of Nanocrystalline BiFeO3-Based Materials Prepared by Solution Combustion Synthesis3
Synthesis of Nanocrystalline Powders in the CеO2〈ZrO2〉–Al2O3 System by the Citrate Sol–Gel Method3
Barium-Substituted Tricalcium Phosphate Ceramics3
Sol–Gel Synthesis of Ca3(PO4)2 and Ca3 – xNa2x(PO4)2 Powders for the Fabrication of Bioceramics by 3D Printing3
Effect of Hot Pressing Conditions on the Microstructure and Optical Properties of MgO–Y2O3 Composite Ceramics3
Synthesis of SrSnO3/SnO2 Composites via Thermal Decomposition of a Precursor3
SiC-Fiber Reinforced Silicon Carbide-Based Ceramic Composite3
X-ray Photoelectron Spectroscopy Study of Mg Adsorption on Nanocrystalline Hydroxyapatite3
Heat Capacity and Thermodynamic Functions of PdS3
Oxygen Chemisorption on the Surface of an In2O3 (011) Nanocrystal3
Preparation and Characterization of Lithium Niobate Single Crystals Activated with Magnesium and Boron3
Application of Foam Glass Based on Glass Scrap and Plant Ash and Slag for the Preparation of Catalytically Active Materials3
Low-Temperature Luminescence of Lithium Aluminate Spinel LiAl5O8 Doped with Chromium Ions3
Acoustic and Optical Properties of a LiBi(MoO4)2 Crystal3
Evaluation of the Temperature Range Suitable for the Synthesis of B4C–TiB2 and B4C–ZrB2 Powder Composite Materials3
Synthesis, Crystal Structure and Thermodynamic Properties of LuGaTi2O73
Synthesis of Lanthanum Hexaboride in a Chloride–Oxide Melt3
Preparation of Niobium Carbide-Based High-Temperature Ceramics by Direct Niobium Carburization3
Effect of Copper Additions on the Thermoelectric Properties of a Layered Calcium Cobaltite Prepared by Hot Pressing3
Phase Equilibria in the Ternary Reciprocal System K+, Ba2+||Br–, $${\text{MoO}}_{4}^{{2 - }}$$3
Hydrolytic Stability of Y2.5Nd0.5Al5O12-Based Garnet Ceramics under Hydrothermal Conditions3
Trends in the Development of Room-Temperature Sodium–Sulfur Batteries3
Formation of Magnesium Hydrosilicate Nanoscrolls with the Chrysotile Structure from Nanocrystalline Magnesium Hydroxide and Their Thermally Stimulated Transformation3
Preparation of an Al–Ti–Mg Composite by Self-Propagating High-Temperature Synthesis3
Effect of Barium Concentration on the Structural Properties and Electrical Conductivity of Pr1 – xBaxMnO3 (x = 0, 0.15, 0.25) Solid Solutions3
Structural Features and Sorption Properties of Mesoporous Carbon Material Prepared from Natural Shungite3
Optical Properties of Lutetium Diphthalocyanine Complex with Silicon Carbide Nanoparticles3
Determining the Level of Dust on Printed Circuit Boards of Radio-Electronic Equipment by Optoelectronic Method3
Photocatalytic Properties of the MgHPO4·3H2O and MgKPO4·6H2O Phosphates3
Thermodynamic Modeling of Phase Equilibria in the U–Zr–N System3
Effect of Gamma Irradiation on the Electrical Properties of Extruded Bi85Sb15〈Те〉 Samples3
Rapid X-Ray Fluorescence Analysis of Intercalation Compounds for Molybdenum Content3
Ceramics Based on the NaRe2(PO4)3 Phosphate with the Kosnarite Structure as Waste Forms for Technetium Immobilization3
Formation of Complexes of Phosphorus and Boron Impurity Atoms in Silicon3
Heat Capacity of Compounds in the Bi2O3–TiO2 System3
Influence of Mechanical Milling and Heat Treatment on the Properties of Bronze Powder3
Effect of Viscosity Modifiers on Structure Formation in Cement Systems for Construction 3D Printing3
Preparation of Macrocrystalline Tungsten-Based Alloys by Electron-Beam Floating Zone Melting3
Underwater Plasma Synthesis of Zn–Al Layered Double Hydroxides3
Impurity Composition and Lattice Parameters of High-Purity α-Mn3
Effect of High-Molecular-Weight Carbon Sources on the Electrochemical Properties of Li4Ti5O12/C Composite Materials3
Flash Lamp Processing-Activated Structural Transformations in Foil of a Pd–Cu Solid Solution3
Analytical Capabilities of a Grand Spectrometer in Analysis of Solutions Using Inductively Coupled Plasma3
Self-Propagating High-Temperature Synthesis of TiC + xC Composites2
Synthesis and Thermal Stability of the Multielement Carbide (TaZrHfNbTi)С52
Effect of Deformation on the Grain Size of the Ni3Al Intermetallic Compound Synthesized under Pressure2
Synthesis of the Ti3SiC2 MAX Phase via Combustion in the TiO2–Mg–Si–C System2
Differential Dissolution Stoichiographic Method in Investigation of the Chemical Composition of Functional Materials2
Porous Silica Particles Modified in a NH3 + H2O + H2O2 Mixture: Structure, Filling with Cobalt Oxide, and Catalytic Activity for CO Conversion2
Mechanochemical Synthesis of Lithium Pentaaluminate from Lithium Carbonate and Boehmite2
Features of the Kinetics of Cyclic Elastoplastic Deformation Diagrams at Dwells in Cycles and Superimposition of Variable Stresses on Them2
Optical Modulation of Anti-Stokes Luminescence in CaF2:Er Crystals2
Plasma Jet Synthesis of Cubic Tungsten Carbide of Variable Stoichiometry2
Synthesis of Si3N4-Based Powder Composites for Ceramic Fabrication by Spark Plasma Sintering2
Structure and Properties of a High-Temperature Coating Based on Yttrium Silicate and Yttrium Aluminosilicate Precursors2
Mechanisms of Upconversion Luminescence in BaF2–HoF3 Crystals under Excitation to the 5I5 Level of Ho3+ Ions2
Increased Manganese Solubility and Ferromagnetic Signal in Chalcopyrite CuGaSe2:Mn as a Result of High-Temperature Quenching2
Physicochemical Properties of Arsenic-Containing Lewisite Detoxification Products2
Determination of the Oxidation State of the 99Tc Technetium Isotope on Activated Carbon by X-Ray Photoelectron Spectroscopy2
High-Temperature Synthesis of Mo3Al2C-Based Materials via Combustion of MoO3 + Al + C + Al2O3 Powder Mixtures2
Study of the Fracture Kinetics of a Unidirectional Laminate Using Acoustic Emission and Video Recording2
Heat Capacity of Pb10 –xPrx(GeO4)2 +x(VO4)4– x (x = 0, 1, 2, 3) Apatites in the Range 350–1050 K2
Efficiency of Multiple Distillation or Crystallization Refining with a Preset Yield2
Thermal Expansion Coefficient of a Pd–Cu Solid Solution2
Effect of Severe Forging and Rolling on the Microstructure and Mechanical Properties of Al–Mg–Sc–Zr Alloy2
Laser Amorphization of a Crystalline Phase in the Bulk of a Thermally Stable Lithium Aluminosilicate Glass-Ceramic2
Structure of (ZrTi)0.5(VCrFe(Ni0.9Cu0.1))0.5- and (ZrTi)0.5(VMoFeNi)0.5-Based Deuterides2
Synthesis and Crystal Structures of New RRuxGa1 – x (R = Er, Tm, Lu) Gallides and R2Ru1 – xIn1 + x (R = Dy, Ho, Er, Tm, Lu) Indides2
Growth and Properties of LiNbO3:Mg,B Crystals2
Synthesis, Structure, and Properties of Titanium Diboride Nanoparticles2
Reversibility of the β ↔ α Phase Transformations as the Key Factor Determining Whether the Pd–Cu Membrane Foil Texture Depends on the Foil Preparation Process2
Electrochemical Properties of Carbon Electrodes Modified with Nanoparticles of Fe4[Fe(CN)6]3, K2Co[Fe(CN)6], and Their Sodium-Containing Analogs2
Formation of a Crystalline Phase during Mechanochemical Surface Treatment of Quartz Glass2
Calcium Reduction of Zirconium Oxide Compounds2
Preparation of Dense TiB2 by Forced Self-Propagating High-Temperature Synthesis Compaction with Mechanical Activation of Reagents2
Purity Level of Alkali Metals (according to Materials in the Exhibition–Collection of Extrapure Substances)2
Hydrosols of Titanium Dioxide Nanoparticles Containing Ti(IV) Peroxo Complexes: Modification, Optical Properties, Morphology, and Bleaching Kinetics2
Effect of Structural Perfection of Crystalline β-NaYF4:Yb,Er Phosphor Powders on the Efficiency of Their Upconversion Luminescence2
Magnetic Phase Diagram of Fex(Cu0.5In0.5)1 –xCr2S4 Solid Solutions2
Mo2C Synthesis via Temperature-Programmed Carburization with the Use of Molybdenum Blue Xerogels2
Preparation of Fine-Grained CeO2–SiC Ceramics for Inert Fuel Matrices by Spark Plasma Sintering2
Segregation Melting in the LiAlSi2O6–Na2SO4–NaF System as a Method for the Preparation of Lithium Fluoride2
Electrical Conductivity and Dielectric Permittivity of Directly Doped LiNbO3:Zn,Mg Crystals in the Temperature Range 450–900 K2
Analytical Support for the T 000 Tellurium Preparation Process2
Synthesis and Thermoluminescence Properties of Crystalline Cadmium Tetraborate-Based Phosphors2
Synthesis and Thermal Behavior of a Struvite-Based Fine Powder Fire-Extinguishing Agent2
Cu2+ and Ni2+ Cation Sorption/Desorption Processes on Amorphous Titanium Phosphate Sorbents2
Tailoring the Composition and Structure of Nb-, Si-, and B-Doped Mo-Based Composite Materials in the Self-Propagating High-Temperature Synthesis Metallurgy Process2
Electrical Conductivity and Mechanical Properties of Li7 – 3хAlхLa3Zr2O12 Solid Electrolyte2
Comparison of the Electrode Properties of Graphene Oxides Reduced Chemically, Thermally, or via Microwave Irradiation2
Caloric and Volumetric Properties of the Bi2O3–B2O3–BaO Glass-Forming System for Optical Applications2
Photochemical Engineering and Thermal Transformations of Molybdenum Polyoxometallate Complexes in Aluminosilicate Matrices2
High-Temperature Synthesis of Cr–Mo–Al–C Materials2
Electrical Transport Properties of a Sn-Doped Bi2Te1.5Se1.5 Solid Solution2
Synthesis of Nanoparticulate Cobalt Ferrite and Its Catalytic Properties for Fenton-Like Processes2
Structural Disorder and Heat Capacity of a Solid Solution between Cadmium and Strontium Fluorides2
A Study of Vacuum Arc Deposition Parameters and Their Effect on the Structural and Optical Properties of NiO Nanoparticles2
Growth of Titanium Oxide Nanostructures on γ-Аl2О3 by Atomic Layer Deposition2
Phase Equilibria in the Li2O–Al2O3–Ni–Co–O System2
Synthesis of Cu2 – nSe via Autowave Combustion of an Elemental Powder Mixture2
Nanocomposites Prepared via Thermal Decomposition of Calcium Hydroxystannate CaSn(OH)62
Sorption of Se(IV) from Aqueous Solutions with Subsequent Determination by X-Ray Fluorescence Analysis2
Extraction of Antimony(III) Ions from Solutions by Sorbents Based on Titanium(IV) Compounds2
Effect of Substrate Bias on the Crystal Structure and Morphology of Barium Strontium Niobate Films Grown by RF Cathode Sputtering2
Distribution of Phases and Short-Range Order Distortion in SmS@Y2O2S and Y2O2S@SmS Core–Shell Nanostructures2
Calculation of Two-Stage Metal Hydride Hydrogen Compressors Using a Model of Intermetallic Compound–Hydrogen Phase Equilibria2
Polycondensation of Water Glass Sodium Silicates in the Presence of [BnXn]2– (n = 10, 12; X = H, Cl) Boron Cluster Anions2
Phase Complex and Chemical Interaction in the Ternary Reciprocal System Li+,Rb+||Br–,$${\text{CrO}}_{4}^{{2 - }}$$2
Preparation of Extrapure Cesium Iodide2
Evaluation of the Elastic Compliance of the Hardness Tester in Instrumented Indentation Tests2
Photocatalytic Activity of the Products of Heat Treatment of Calcium Tetraacetate Titanyl and Calcium Tetrahydroxy Titanyl Prepared by Solution Techniques2
Photoluminescence of Europium-Containing Materials Based on Fluorinated Yttria and Alumina2
Synthesis, Structure, and Thermophysical Properties of EuGaGe2O72
Features of Solidification of the 2Bi2O3·3GeO2 Melt under Different Cooling Conditions2
Sorption of Silver Cations from Solutions by Titanium Phosphate Sorbents2
Thermal Conductivity of Sn–SnTe Alloys2
Separation of Pt(IV), Pd(II), and Rh(III) from Chloride Solutions by Multistage Extraction Using Nitrogen-Containing Extractants2
Effect of Titanium Additions on Structural Aspects of Porous TiNi-Based Materials Prepared by Diffusion Sintering2
Impurity Composition of the Oxide Samples in the Exhibition–Collection of Extrapure Substances2
Thermodynamic Properties of AuSb22
Crystal Structure, Luminescence, and Thermodynamic Properties of Pb10 – xEux(GeO4)2 + x(VO4)4 – x (x = 0.1, 0.2, 0.3) Substituted Apatites2
Potentialities of Reaction Sintering in the Fabrication of High-Strength Macroporous Ceramics Based on Substituted Calcium Phosphate2
Effect of TiC and TiB2 Additions on the Structure and Properties of Chromium-Containing Composite Coatings2
50-Year Anniversary of the Method of Determining the Parameters of Crystal Nucleation in Inorganic Glasses2
Techniques for Surface Cleaning of Membrane Foil from Palladium-Based Solid Solutions2
Effect of the Mineralogical Composition of Clay on Microwave Sintering of Aluminosilicates2
Structure and Thermodynamic Properties of the DyGaTi2O7 and EuGaTi2O7 Titanates2
Self-Propagating High-Temperature Synthesis Pressing of Composites Based on the TiB2–B4C–Al System2
Structure, Texture, and Substructure of Foil in Sequential Rolling Steps of Cu–36.4 at % Pd Alloy2
Macroporous Calcium Phosphate Matrices Prepared Using the Technology of Self-Setting Cements2
Phase Equilibria in the Cd–Ga–As–Te System2
Synthesis and Optical Properties of R2O2S:Ln3+ (R = Gd, Y; Ln = Eu, Tb)2
Effect of Precursor on the Dielectric Properties of Diamond-Like Silicon–Carbon Films2
Synthesis, Crystal Structure, and Physicochemical Properties of Bi4–xPrxTi3O12 (x = 0.4, 0.8, 1.2, 1.6) Solid Solutions2
Scientific and Methodological Provision of Safety of Offshore Subsea Pipelines with Defects according to Risk Criteria2
Electrical Conductivity of BaLaIn0.9M0.1O3.95 (M = Mg, Zn)—New Complex Oxides with the Ruddlesden–Popper Structure2
Preparation and Thermoelectric Properties of Zinc Antimonide2
Effect of Silicon Carbide Whiskers on the Physicomechanical Properties of ZrB2/SiC Ceramic Composite Materials2
0.053194999694824