Journal of Applied Electrochemistry

Papers
(The median citation count of Journal of Applied Electrochemistry is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-07-01 to 2025-07-01.)
ArticleCitations
Structure and corrosion of Al-40 wt.% Nb-2 wt.% X alloys rapidly solidified from the melt51
PbSnO3@nitrogen-doped carbon nanocomposites as anode materials for lithium-ion batteries44
Decolorization of rhodamine B using an ultrasonic oxygen-doped carbon felt as cathode in electro-Fenton system43
Transforming CO2 into energy storage solutions: MnCO3/electrochemically exfoliated graphene hybrid for supercapacitors and lithium-ion batteries39
High-voltage and long-life aqueous lithium-ion batteries based on polyanionic framework structured Na3V2(PO4)3 and NbOPO4 in novel deep eutectic solvents35
Impact of unsolvated lithium salt concentration on the ions transport pathway in polymer electrolyte (LiTFSI-PEO): empirical mathematical model to predict the ionic conductivity35
Red mud as high-performance bifunctional electrocatalysts in alkaline media31
An effective alliance for successful coupling: electrochemical alcohol oxidation mediated conversion of indoles to bis(indolyl)methanes26
A novel of 2D-3D combination carbon electrode to improve yeast microbial fuel cell performance26
Fabrication and evaluation of TiO2/multiwalled carbon nanotube composite thin-film photoelectrodes via sol–gel electrophoretic deposition using mixed solvents25
Current collectors corrosion behaviours and rechargeability of TiO2 in Aqueous Electrolyte Aluminium-ion batteries24
Molecularly imprinted copolymer/reduced graphene oxide for the electrochemical detection of herbicide propachlor22
A heterostructure NiSe2 nanoparticle @ FeSe2 microrod catalyst for efficient electrocatalytic oxygen evolution22
Self-supporting Co/MoC/Mo2C composite electrocatalyst derived from biomass carbon for efficient hydrogen evolution21
AuNPs/PPy/rGO-modified labeled electrochemical aptasensor for the detection of MUC121
Development of onboard multi-frequency impedance spectrum measurement device for high-power vehicular fuel cell system21
Electrodeposited Ni-Se on recycled steel substrate as eco-friendly electrodes with enhanced electrocatalytic activity towards urea oxidation reaction20
One-pot synthesis of low-cost CuS/Vulcan carbon composites applied as electrode materials for supercapacitors20
Synergistic promotion of ascorbic acid and sodium citrate to the stability of electrolyte for electrolytic iron production20
Green synthesis of Ni-doped nipa palm shell-derived carbon aerogel for storage energy, electrochemical sensing, and oil adsorption20
Development of unmodified and CTAB-modified carbon paste electrodes (CPE) for direct electrochemical analysis of nitrites in aquarium water and rat blood20
Performance evaluation of high temperature polymer electrolyte membrane fuel cells: an experimental investigation19
Novel synthesis of porous BN/β-SiC/SnO2/In2O3 quaternary nanocomposites and its gas sensing properties under different working temperatures19
Creatinine-copper interaction: electrochemical and spectroscopic insight, and an innovative verification of a molecularly imprinted creatinine sensor design18
Electrochemical and physiochemical studies on the effects of thiadiazole derivatives in corrosion inhibition of Muntz metal in sulfide-polluted marine environment18
Highly selective electrochemical oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid enabled by molybdate18
Voltammetric determination of aflatoxin B1 using a bismuth layer-gold nanoparticles modified glassy carbon electrode18
Ce-doped NiFe layered double hydroxide grown on nickel foam for efficient oxygen evolution reaction18
Effect of gradient magnetic field on corrosion of carbon steel pipes in seawater pumped storage power plants18
Surfactant-tolerant cathodes for electrochemical generation of hydrogen peroxide for wastewater treatment18
Ex-situ remediation of arsenic-fluorinated water using electrocoagulation: neural network multi-objective modelling and metaheuristic optimisation17
Multifunctional, energy and environmental applications of calcium magnesium vanadate (Ca5Mg4V6O24) nanoparticles synthesized by solution combustion17
Correction: Mechanism of β-Al(OH)3 scale formation on grading electrode in HVDC transmission converters17
Photoelectrocatalytic treatment and resource utilization of industrial waste salt for chlor-alkali electrolysis17
Correction: Incorporation of nickel particles into a polyaniline thin film for non-enzymatic glucose sensing in alkaline medium17
Electrochemical detection of nitrite at Co(II) and Ru(II)-based metallo-supramolecular polymer-modified glassy carbon electrode and study the kinetics of electron transfer17
Investigations of cathodic reactions using cyclic voltammetry and electrochemical behavior of Ti–Al–Zr alloy in nitric acid using electrochemical impedance spectroscopy17
Degradation of 1,4-dioxane from water and plating industry wastewater using electrochemical batch and plug flow reactors17
Fabrication and theoretical analysis of sodium alpha-olefin sulfonate-anchored carbon paste electrode for the simultaneous detection of adrenaline and paracetamol16
Chlorophyll interpolated nafion-membrane for flexible supercapacitor with methanol and ethanol oxidation reaction16
Fabrication of carbon nanospheres functionalized Sm2O3/Co3O4 novel hybrid nanocomposites for selective and sensitive amperometric detection of hydrogen peroxide16
Molecular imprinted polymer modified carbon ultramicroelectrode for a selective detection of 3-methyl-4-nitrophenol and its bioremediation in a fungal microbial fuel cell16
Catalytic performance on the water decontamination and the water-splitting electrolysis of new phosphite salts (enH2)[M(H2O)6](HPO3)2 (M=Co, Ni and Mg)16
Effective electrodeposition of poly(3,4-ethylenedioxythiophene)-based organic coating on metallic food packaging for active corrosion protection16
Composite carbon electrode with a coating of nanostructured, reduced graphene oxide for water electrodialysis15
Electrodeposition of nickel–iron on stainless steel as an efficient electrocatalyst coating for the oxygen evolution reaction in alkaline conditions15
Ni/Co-based zeolitic-imidazolate framework pseudocapacitance in asymmetrical cells15
Correction: Recent progress in the fabrication of nanostructured zinc-based ternary metal oxides for high-performance lithium-ion batteries15
Transition metal atoms anchored in the two-dimensional material MoGe2P2As2: an excellent electrocatalyst with multifunctionality15
Bioelectricity production of microbial fuel cells (MFCs) and the simultaneous monitoring using developed multi-channels Arduino UNO-based data logging system15
Correction: A comparison study of the electrochemical polishing of laser powder bed fusion HR-2 stainless steel and AlSi10Mg15
Polymer-free gel electrolyte and its application in TiO2-based electrochromic devices14
Modulation in the electronic structure of Ir-rich shell on AuIr solid solution as OER electrocatalyst for PEM electrolyzer14
Chemically synthesized cobalt oxide incorporated copper hexacyanoferrate (Co3O4–CuHCF) composite as an efficient supercapacitor electrode material14
Investigation of zinc electronucleation and growth mechanisms onto platinum electrode from a deep eutectic solvent for gas sensing applications14
Optimizing HDPE separator properties through thermoplastic elastomer loading and manufacturing process for improved lithium-ion battery electrochemical performance14
Improving electrochemical stability and electromechanical efficiency of ipmcs: tuning ionic liquid concentration14
Butylated hydroxyanisole nanomolar detection using a molecularly imprinted electrochemical sensor in food samples14
COF-42 as sensory material for voltammetric determination of Cu(II) ion: optimizing experimental condition via central composite design14
Degradation of sodium lauryl sulfate and its effect during cobalt electrowinning14
Removal of lindane using electrokinetic soil flushing coupled with air stripping14
CeO2 and PEDOT:PSS modified conducting paper for organophosphate pesticide detection14
Carbon black-polytetrafluoroethylene electrode electrically activated persulfate for the treatment of metronidazole wastewater14
An investigation of the work function and stability of chromium oxide thin films deposited by reactive magnetron sputtering14
Quantitative analysis of proton exchange membrane fuel cell degradation during idling using distribution of relaxation times13
Research on the performance of Zr-doped pyrochlore-structured Co2Sb2O7 electrocatalysts for oxygen evolution reaction13
Insight on the corrosion inhibition performance of Glebionis coronaria plant extract in various acidic mediums13
Multi-walled carbon nanotubes/polyaniline covalently attached 18-crown-6-ether as a polymeric material for the potentiometric determination of delafloxacin13
Facile synthesis and characterization of NiCo2O4-rGO binary for energy-storing application13
Generation of surface texture on 2A50 aluminum alloy with electrochemical micromachining for tribological application13
Electrocatalyst for ethanol oxidation reaction based on isatin-modified chitosan13
Algae-derived hard carbon anodes for Na-ion batteries13
Synthesis and electrochemical properties of Mo4/3B2Tx MBene as an anode material for lithium-ion batteries12
Anodized TiO2 nanotubes using Ti wire in fluorinated ethylene glycol with air bubbles for removal of methylene blue dye12
Electrochemical reduction of CO2 to useful fuel: recent advances and prospects12
Urea-based fuel cells on paper with micro-watt power generation to drive low power circuits12
Sensitive detection of barium ion based on its enhancing effect on luminol electrochemiluminescence at cucurbit[7]uril-modified electrode12
Tri- and tetra-metallic oxides anchored to nitrogen-doped carbon nanotubes as bifunctional electrocatalysts for rechargeable zinc-air batteries12
Thermal runaway procedure and residue analysis of LiFePO4 batteries with different charging states under nail penetrating11
Electrochemical determination of 25-hydroxyvitamin D3 using conductive porous template based on gold-modified metal organic framework@mesoporous silica particles11
Synthesis of green anode material for lithium-ion battery from orthodontic waste by fuzzy logic11
Effect of zirconium on the corrosion behavior of FeAl40Ti3B intermetallic compounds for use in solar water heaters11
An ionic liquid-present immersion method for preparing cotton fiber-shaped Cu2O nanoparticles at room temperature11
Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities11
Fabrication of a novel electrochemical sensor using conductive MOF Cu-CAT anchored on reduced graphene oxide for BPA detection11
Correction: Enhanced Li‑storage performance of In‑doped Li1.21[Mn0.54Ni0.125Co0.125]O2 as Li‑ and Mn‑rich cathode materials for lithium‑ion batteries11
Investigating the influence of varying cobalt doping on the cross-sectional widths and surface composition of MnOx nanowires in the context of battery–supercapacitor systems11
Direct synthesis of vanadium pentoxide powder with carbon recombination as aqueous zinc-ion battery cathode11
Enhanced capacity of LiCoO2 and graphite battery by using methylene methanedisulfonate as electrolyte additive11
ZIF-67 nanocrystals for determining silver: optimizing conditions by Box–Behnken design11
B- and N-doped carbon coupled with different morphologies of MoS2 for hydrogen evolution reaction11
Correction: Synergetic electrochemical performance of Nix–Mnx sulfide-based binary electrode material for supercapattery devices11
Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance11
Electrolytic silver-tin (AgSn20) process for electronic finishing11
The effect of surface preparation on the nucleation of zinc-nickel alloy electroplated in acidic electrolyte on steel substrate11
Investigation of urea oxidation as a potential anode reaction during CO2 electrolysis10
Simultaneous determination of paracetamol and codeine phosphate in combined tablets by an electrochemical method using TiO2/rGO modified glassy carbon electrode10
Effect of anode passivation on ferrate(VI) electro-generation using ductile iron anode and application for methylene blue treatment10
Optimization of CuS@NiO nanocomposite for enhanced charge storage in supercapacitors10
Catalyst-free α-bromination of acetophenones by two-phase electrolysis10
Correction: Surface treatment and corrosion protection of mild steel by the oily extracts of olive mill waste cake10
Synthesis of Pd-Cu/TPPCu electrocatalyst for direct ethanol fuel cell applications10
Mechanistic investigation of a novel aqueous binder CMC-NH4 enriched with electronegative elements on the performance of LiFePO4 cathode10
Mechanistic insights into enhanced electroplating of ultra-thin copper foils using ADT-DMAP as a superior acridone-based leveler10
A single-step reduction and heteroatom doping of graphene oxide for enhancing super capacitive property10
Facile synthesis of spinel nickel–manganese cobaltite nanoparticles with high rate capability and excellent cycling performance for supercapacitor electrodes10
Electrochemical detection of creatinine on Cu/carbon paper electrodes obtained by physical vapor deposition10
Evaluation and screening of Si-based anode materials in commercial Li-ion cells for electric vehicle applications10
Correction: Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities10
Electrochemical techniques to investigate adsorption and desorption behavior of fibrinogen on a gold surface9
Insights into the electrochemical performance of manganese dioxide coated metallic foils as potential electrodes for supercapacitors9
Exploring furfuryl alcohol as carbon coating agent for silicon/graphite anode active materials9
Electrochemical synthesis of PVP K30-AgNPs modelling based on ANN-LMP: Box-Behnken optimization for antioxidant and antibacterial activities9
Study of lithium metal-based electrodes by electrochemical dilatometry9
Optimal current density for cathodic CeCC deposition on anodized AA2024-T3 aircraft alloy9
Synthesis and properties of P-doped mesoporous carbon9
Preparation and coating modification of lithium-rich layered oxides Li1.2Mn0.54Ni0.13Co0.13O2 via Al2O39
Synergistic design of Mo-intercalated NiSe2: a binary transition metal chalcogenide for highly efficient bifunctional seawater electrolysis9
Evolution and stability of 2-mercaptobenzimidazole inhibitor film upon Al alloy 60619
Kinetic and geometric considerations in modeling screen-printed electrode-based sensors9
3D reticulated vitreous carbon as advanced cathode material in galvanic deposition process9
Biodegradable iron-based foams prepared by the space holder technique using urea9
Evaluation of antigen-antibody recognition by electrochemical impedance on AuNP-biopolymer electrode9
Kinetic and thermodynamic properties of La(III) on Molybdenum electrode in LiCl–KCl–LaCl3 melts9
Electrochemical behavior of additive manufactured TC4 alloy in different concentrated NaCl solutions9
Fabrication of polycrystalline diamond films with various boron doping levels deposited on WC–Co electrode for organic pollutants oxidation9
Superstrate-type photovoltaics with copper indium sulfide (CuInS2) fabricated by solution processes: correlation between interfacial charge transfer and solar cell performance9
Retraction Note to: Structural and electrochemical impedance spectroscopic studies on reactive magnetron sputtered titanium oxynitride (TiON) thin films8
Specific unlocking of the butterfly effect: nanointerface-based electrochemical biosensing of adenosine triphosphate and alkaline phosphatase8
Parametric study on the electrochemical performance and stability of PbO2-coated titanium electrodes for electrowinning applications8
A novel electrochemical sensor for ultra-sensitive detection of nitrite based on the synergistic effect of surfactant and KTiTaO58
Conductivity monitoring of PBASE functionalized CVD graphene electrode for biosensor applications8
Optimizing Pt catalyst performance for oxygen reduction reaction via surface functionalization of Vulcan XC-72R carbon black support8
Electrochemical determination of fenuron herbicide in environmental water samples by electro-reduced graphene oxide sensor8
Facile synthesis of hairbrush like FeVO4@C/CC anode material with enhanced electrochemical performance for alkaline ion batteries8
Electrochemical corrosion behavior study of different porosity zinc scaffolds in simulated body fluid (SBF) for biomedical applications8
Characterization and applications of ion-exchange membranes and selective ion transport through them: a review8
Core–shell mesoporous silica-based ion-imprinted electrochemical sensor for the determination of trace Cd2+ in water8
Stacked microporous layers with a rational gradient in pore size enhance the performance of proton exchange membrane fuel cells8
In situ polymerization of meta nitro benzoic acid on graphite electrode as a mediator for the electrochemical oxidation of resorcinol8
NiZr2S4 bimetallic sulphide thin films: synthesis and multifunctional applications in nanotechnology8
Corrosion inhibition behavior of chalcone oxime derivatives on carbon steel in 0.5 M H2SO48
Preparing an ultra-smooth TaW alloy surface with chemical mechanical polishing via controlling galvanic corrosion8
Reverse electrodialysis for power production with ion-permselective spacers and its optimization8
Field-use device for the electrochemical quantification of carbamazepine levels in a background of human saliva8
Corrosion behavior of electrodeposited amorphous Ni–P coating by laser-induced crystal modifier8
Correction: NiZr2S4 bimetallic sulphide thin films: synthesis and multifunctional applications in nanotechnology8
Covalent functionalization of graphene oxide with l-lysine for highly sensitive and selective simultaneous electrochemical detection of rifampicin and acetaminophen8
Understanding and preventing Cu–Sn micro joint defects through design and process control8
Label-free electrochemical immunosensor based on AuNPs/coiled carbon nanotubes/chitosan-nanocomposites for detection of carcinoembryonic antigen8
Lithium-ion batteries using metal foil-free electrodes toward sustainable battery circulation8
Electrochemical sensing of phenolic pollutant catechol on LaNiO3 perovskite nanostructure platform8
Enhanced the electrochemical performance of CoMgS nanocomposite electrode with the doping of ZnO for supercapacitor-battery hybrid device and photochemical activity8
Testing the performance of dye sensitized solar cells under various temperature and humidity environments8
Chemical-physical characterisation of 5-Phenyl-1H-tetrazole inhibitive behaviour: a new non-toxic compound for a sustainable protection of Cu-alloys8
Improvement of performance stability of electrolytic copper foils by bi-component additives8
Composition and growth mechanism of nanoporous anodic fluoride films on stainless steel8
Non-precious Sn as alternative substitute metal in graphene-based catalysts for methanol electrooxidation8
Microwave-assisted synthesis of cadmium/reduced graphene oxide composite: an operative platform for highly specific electrochemical determination of bisphenol-A8
Voltammetric sensing of tryptophan in dark chocolate bars, skimmed milk and urine samples in the presence of dopamine and caffeine8
Effect of electroosmotic and hydraulic flow on the desalination of soils7
Review of biopolymer electrolytes for sustainable Na-based energy storage systems7
Enhanced cycling performance of lithium-ion batteries with V2O5 as cathode by Co-doping for structural stability7
A novel collaborative signal amplification biosensor based on sandwich-type composite film for ultrasensitive detection of rhEPO7
A comparative study of Pd/rGO and Pd–Cu/rGO toward electrooxidation of low ethanol concentrations for fuel cell-based breath alcohol analyzer application7
Optimization of electrolyte co-additives, TiO2 thickness, and dye concentration for the enhanced performance of dye-sensitized solar cells7
Evaluating Zn ferrite (ZnxFe3-xO4; 0 ≤ x ≤ 1) for alkaline water oxidation: electrochemical and spectro-electrochemical study7
An ultrasensitive non-enzymatic electrochemical cholesterol sensor based on copper foam/CuO/Pt/ p-phenylenediamine molecularly imprinted polymer7
Biocorrosion studies of a novel Mg70Al18Zn6Ca4Y2 low entropy multicomponent alloy in different simulated body fluids7
In-situ electrokinetic remediation of salt-impacted soil at a decommissioned well site7
Experimental investigation of machining rate, geometrical accuracy and optimization of machining parameters in electrochemical micromachining of stainless steel 3047
Electrochemical detection of cortisol using a structure-switching aptamer immobilized on gold nanoparticles-modified screen-printed electrodes7
Electrochemical and quantum chemical study to assess the role of (2E)-2-(furan-2-ylmethylidene) hydrazine carbothioamide as inhibitor for acid corrosion of mild steel7
Electrochemical sensor based on epoxy-functionalized BEA nanozeolite and graphene oxide modified glassy carbon electrode for bisphenol E determination7
Preparation and evaluation of a stable SmBa0.75Sr0.25Fe2O5+δ cathode material for solid oxide fuel cells7
Corrosion evaluation of Ti–6Al–4V manufactured by electron beam melting in Ringer’s physiological solution: an in vitro study of the passive film7
Novel approach for rapid electrochemical profiling of Escherichia coli cell-free supernatant7
Modification of the single tetraethoxysilane-treated anodized aluminum by the trimethoxy(propyl)silane retreatment for corrosion protection7
Date seed-derived porous carbon for advanced Li–Se battery applications7
A new method for optimising polarisation point in electrochemical impedance based measurements7
Fabrication and optimization of ZnO-multiwalled carbon nanotubes modified glassy carbon electrode for the detection of 2-(4-(1-isonicotinoyl-5-aryl-4,5-dihydro-1H-pyrazol-3-yl)phenoxy)-N-arylacetamide7
Reinforcing NiO microsphere structural stability via amorphous carbon sheets obtained from waste milk for lithium-ion capacitor application7
Bi-phasic BiPO4 prepared through template-assisted hydrothermal method with enhanced electrochemical response for hybrid supercapacitor applications7
New binder-free anode material for lithium-ion batteries based on ZnO nanoflowers/Zn electrode decorated by multiwall carbon nanotubes7
Microbial fuel cell-based sensor for Enterobacter sp. KBH6958 activity monitoring during hydrogen production: the effects of pH and glucose concentration7
Evaluating single-crystal and polycrystalline NMC811 electrodes in lithium-ion cells via non-destructive EIS alone7
Electrochemical sensor for detection of dopamine and tyrosine using CdS–C quantum dots modified electrode7
Voltammetric determination of lactic acid in milk samples using carbon paste electrode modified with chitosan-based magnetic molecularly imprinted polymer7
Stripping voltammetry meets chemometric: a powerful duo for pinpointing harmful As3+ ions in water7
A novel environmentally friendly mixed complex bath for electrodeposition of a thin film of crack-free FeCrNi stainless steel-like7
Surface treatment and corrosion protection of mild steel by the oily extracts of olive mill waste cake6
Photoelectrocatalytic oxidation of progesterone in water using carbon-coated titanium anode and vanadium pentoxide catalyst: dynamics of steroid removal6
Enhanced electrochemical performance of fumed silica-based gel electrolyte with polypyrrole for valve-regulated lead-acid batteries6
Electrochemical evaluation of the effect of anode to cathode surface area ratio on power generation in air-cathode microbial fuel cells6
Incorporation of nickel particles into a polyaniline thin film for non-enzymatic glucose sensing in alkaline medium6
Cerium chloride-assisted subcritical water carbonization for fabrication of high-performance cathodes for lithium-ion capacitors6
Silver nanoparticles electrodeposited on electrochemically treated 3D sensor for nimesulide monitoring by amperometric detection with flow injection analysis6
Electrochemical performance of NiO and Ni(OH)2-based supercapacitors derived from recycled Ni–Ti rotary files: a hydrometallurgical approach6
Assessing LiF as coating material for Li metal electrodes6
Effect of Al and Zn addition on the active behavior of the high P pig iron-based composite anodes6
Hierarchical MnO2/hollow carbon spheres composites for asymmetric supercapacitors with enhanced performance6
Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples6
Bioelectrochemical assessment of a novel electrogenic Bacillus altitudinis AC11.2 for electricity generation in microbial fuel cell (MFC) system6
Analyzing the influence of carboxymethyl cellulose binder viscosity on the electrochemical performance of the mesocarbon microbead anode in lithium-ion batteries6
Electrosynthesis of poly (4-amino-3-nitrostyrene) film and its characterization6
Cobalt doping stabilizes the expanded structure of layered double hydroxide cathodes for application in fast charging Ni–Zn batteries6
Electrochemical syntheses and characterization of some polydyes and their application for the simultaneous determination of ascorbic acid and uric acid6
The fabrication of TiO2/AgCNF/Nafion/GC electrodes for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II) by optimizing the porosity of electrospun TiO2 nanofibers6
Reaction pathway of nitrate and ammonia formation in the plasma electrolysis process with nitrogen and oxygen gas injection6
Electrochemical self-signal identification of Kirsten rat sarcoma virus oncogene based on riboflavin 5′-(trihydrogen diphosphate) functionalized WS2 nanosheets6
Glycerol determination by chronoamperometry using Ni(OH)2/RGO on carbon paste electrode6
The effect of anode degradation on energy demand and production efficiency of electrochemically precipitated struvite6
Powering up and cleaning up: NiS:Cu2S:Nd2S3 thin film as a supercapacitor electrode and photocatalyst6
Electrocatalytic oxidation of hydrazine using Mn(II)-Y mesoporous materials modified carbon paste electrode6
Enhanced electrocatalytic lead-based anodes with phosphorylated lignin for oxygen evolution reaction in zinc electrowinning6
Gold nanoparticles/graphene oxide/β-Cyclodextrin nanocomposite for electrochemical determination of Novafen, a new dosage form, in human serum and pharmaceuticals6
Comparison the anticorrosion behavior of three symmetrical Schiff-base ligands: experimental and theoretical studies6
Fabrication of a selective and sensitive electro-synthesized molecularly imprinted polymer-based electrochemical sensor for the determination of xanthine6
PEM fuel cell applications of doped (Ni, Zr) metal alloyed Pt/C cathode catalysts6
Numerical study of heterogeneous porosity in gas diffusion layers of high-temperature proton-exchange membrane fuel cells6
Electrochemical oxidation of diethyl phthalate at two dimensional graphite sheet electrodes: optimization and analysis of degradation in water with HRMS5
Morphological attributes and electrochemical performance of Cu/Co/Ni metal-organic framework-based carbon nanomaterials5
MoVN-coated MoNi4-MoO2 nanorods as a bifunctional electrode for electrochemical water splitting5
Electrochemical synthesis of hierarchical carbon fiber@PPy@PtNi composite for the high-efficient oxygen reduction in seawater medium5
Synthesis of Pt–MoOx/graphene composite and its electro–photo synergistic catalysis for oxygen reduction reaction5
Precursor solution concentration-dependent electrochemical supercapacitive behavior of spray-deposited RuO2 films using aqueous/organic solvent mixtures5
Two-dimensional Fe-TPPHZ nanosheets for electrohydrogenation of N2 to NH3 under ambient conditions5
Analysis of CO selectivity during electroreduction of CO2 in deep eutectic solvents by machine learning5
Strategic management of patents on electrochemical conversion fuel cells and batteries in Latin America as a mechanism for moving towards energy sustainability5
ZIF-8-derived porous carbon: application in capacitive deionization for vanadium (V) adsorption5
Development and application of an electrolysis cell prototype based on textile electrodes: dyestuff wastewater electrolysis5
Polygonal-like structure WO3 by hydrothermal route: high performance and ultra-stable for supercapacitor applications5
Correction: Effect of anode passivation on ferrate(VI) electro-generation using ductile iron anode and application for methylene blue treatment5
Electro-Fenton degradation of diclofenac: study of the effect of the operating variables on degradation kinetics and the mineralization of the pollutant5
Low cost and efficient counter electrode for solid-state natural dye-sensitized solar cells5
Superior electrochemical performance of aqueous zinc-ion battery achieved by pairing a Nickel-based electrode prepared through one-step electrodeposition with manganese-rich electrolyte5
The synthesis of polyindole-based binder-free coating and its effect on the corrosion behavior of mild steel in 3.5% NaCl solution5
Synthesis of AuxCo100 − x/MWCNT nanoparticles as an efficient anode electrocatalyst for borohydride oxidation in alkaline medium5
Experimental and theoretical study of xanthene derivatives as corrosion inhibitor for mild steel in hydrochloric acid solution5
Light and oxygen caused degradation of carbon nanotubes supported platinum catalyst in storage5
Electrochemical exfoliation of graphite from pencil lead to graphene sheets: a feasible and cost-effective strategy to improve ciprofloxacin sensing5
Effect of immersion time on the corrosion behaviour of X70 and X80 line pipe steels in simulated concrete pore solution5
Voltammetric and impedimetric analysis of adriamycin and fish sperm DNA interaction using pencil graphite electrodes5
Efficient synthesis of enwrapped CuO@rGO nanowire arrays to improve supercapacitor electrode performance5
Candle soot derived carbon dots as potential corrosion inhibitor for stainless steel in HCl medium5
A flexible electrochemical sensor for simultaneous determination of glucose (Glu) and ethanol (Eth) using ZnO and Pd nanoparticles5
Regulation of the electric double-layer capacitance of MoS2/ionic liquid by carbon modification5
Synthesis and characterization of CuO micro-flowers/PPy nanowires nanocomposites as high-capacity anode material for lithium-ion batteries5
Facile synthesis of Co3O4/C porous polyhedrons for voltammetric determination of quercetin in human serum and urine5
Treatment of strained yoghurt wastewater by electrochemical oxidation method using Taguchi experimental design5
0.053844928741455