Journal of Applied Electrochemistry

Article	Citations
Structure and corrosion of Al-40 wt.% Nb-2 wt.% X alloys rapidly solidified from the melt	54
Development of onboard multi-frequency impedance spectrum measurement device for high-power vehicular fuel cell system	45
Green synthesis of Ni-doped nipa palm shell-derived carbon aerogel for storage energy, electrochemical sensing, and oil adsorption	43
PbSnO3@nitrogen-doped carbon nanocomposites as anode materials for lithium-ion batteries	40
Decolorization of rhodamine B using an ultrasonic oxygen-doped carbon felt as cathode in electro-Fenton system	38
Transforming CO2 into energy storage solutions: MnCO3/electrochemically exfoliated graphene hybrid for supercapacitors and lithium-ion batteries	35
High-voltage and long-life aqueous lithium-ion batteries based on polyanionic framework structured Na3V2(PO4)3 and NbOPO4 in novel deep eutectic solvents	33
Electrodeposited Ni-Se on recycled steel substrate as eco-friendly electrodes with enhanced electrocatalytic activity towards urea oxidation reaction	31
An effective alliance for successful coupling: electrochemical alcohol oxidation mediated conversion of indoles to bis(indolyl)methanes	25
Red mud as high-performance bifunctional electrocatalysts in alkaline media	25
AuNPs/PPy/rGO-modified labeled electrochemical aptasensor for the detection of MUC1	25
A novel of 2D-3D combination carbon electrode to improve yeast microbial fuel cell performance	23
Fabrication and evaluation of TiO2/multiwalled carbon nanotube composite thin-film photoelectrodes via sol–gel electrophoretic deposition using mixed solvents	21
Synergistic promotion of ascorbic acid and sodium citrate to the stability of electrolyte for electrolytic iron production	21
Self-supporting Co/MoC/Mo2C composite electrocatalyst derived from biomass carbon for efficient hydrogen evolution	21
One-pot synthesis of low-cost CuS/Vulcan carbon composites applied as electrode materials for supercapacitors	20
Impact of unsolvated lithium salt concentration on the ions transport pathway in polymer electrolyte (LiTFSI-PEO): empirical mathematical model to predict the ionic conductivity	20
Current collectors corrosion behaviours and rechargeability of TiO2 in Aqueous Electrolyte Aluminium-ion batteries	20
Molecularly imprinted copolymer/reduced graphene oxide for the electrochemical detection of herbicide propachlor	20
A heterostructure NiSe2 nanoparticle @ FeSe2 microrod catalyst for efficient electrocatalytic oxygen evolution	20
Performance evaluation of high temperature polymer electrolyte membrane fuel cells: an experimental investigation	19
Highly selective electrochemical oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid enabled by molybdate	19
Novel synthesis of porous BN/β-SiC/SnO2/In2O3 quaternary nanocomposites and its gas sensing properties under different working temperatures	19
Ce-doped NiFe layered double hydroxide grown on nickel foam for efficient oxygen evolution reaction	19
Development of unmodified and CTAB-modified carbon paste electrodes (CPE) for direct electrochemical analysis of nitrites in aquarium water and rat blood	19

Effect of gradient magnetic field on corrosion of carbon steel pipes in seawater pumped storage power plants	18
Surfactant-tolerant cathodes for electrochemical generation of hydrogen peroxide for wastewater treatment	18
Voltammetric determination of aflatoxin B1 using a bismuth layer-gold nanoparticles modified glassy carbon electrode	18
Ex-situ remediation of arsenic-fluorinated water using electrocoagulation: neural network multi-objective modelling and metaheuristic optimisation	17
Correction: Incorporation of nickel particles into a polyaniline thin film for non-enzymatic glucose sensing in alkaline medium	17
Correction: Mechanism of β-Al(OH)3 scale formation on grading electrode in HVDC transmission converters	17
Multifunctional, energy and environmental applications of calcium magnesium vanadate (Ca5Mg4V6O24) nanoparticles synthesized by solution combustion	17
Electrochemical and physiochemical studies on the effects of thiadiazole derivatives in corrosion inhibition of Muntz metal in sulfide-polluted marine environment	17
Electrochemical detection of nitrite at Co(II) and Ru(II)-based metallo-supramolecular polymer-modified glassy carbon electrode and study the kinetics of electron transfer	17
Investigations of cathodic reactions using cyclic voltammetry and electrochemical behavior of Ti–Al–Zr alloy in nitric acid using electrochemical impedance spectroscopy	17
Fabrication of carbon nanospheres functionalized Sm2O3/Co3O4 novel hybrid nanocomposites for selective and sensitive amperometric detection of hydrogen peroxide	17
Degradation of 1,4-dioxane from water and plating industry wastewater using electrochemical batch and plug flow reactors	16
Photoelectrocatalytic treatment and resource utilization of industrial waste salt for chlor-alkali electrolysis	16
Chlorophyll interpolated nafion-membrane for flexible supercapacitor with methanol and ethanol oxidation reaction	16
Catalytic performance on the water decontamination and the water-splitting electrolysis of new phosphite salts (enH2)[M(H2O)6](HPO3)2 (M=Co, Ni and Mg)	16
Molecular imprinted polymer modified carbon ultramicroelectrode for a selective detection of 3-methyl-4-nitrophenol and its bioremediation in a fungal microbial fuel cell	16
Fabrication and theoretical analysis of sodium alpha-olefin sulfonate-anchored carbon paste electrode for the simultaneous detection of adrenaline and paracetamol	16
Creatinine-copper interaction: electrochemical and spectroscopic insight, and an innovative verification of a molecularly imprinted creatinine sensor design	16
Effective electrodeposition of poly(3,4-ethylenedioxythiophene)-based organic coating on metallic food packaging for active corrosion protection	16
Correction: A comparison study of the electrochemical polishing of laser powder bed fusion HR-2 stainless steel and AlSi10Mg	15
Composite carbon electrode with a coating of nanostructured, reduced graphene oxide for water electrodialysis	15
Electrodeposition of nickel–iron on stainless steel as an efficient electrocatalyst coating for the oxygen evolution reaction in alkaline conditions	15
Correction: Recent progress in the fabrication of nanostructured zinc-based ternary metal oxides for high-performance lithium-ion batteries	15
Butylated hydroxyanisole nanomolar detection using a molecularly imprinted electrochemical sensor in food samples	14
Optimizing HDPE separator properties through thermoplastic elastomer loading and manufacturing process for improved lithium-ion battery electrochemical performance	14
Chemically synthesized cobalt oxide incorporated copper hexacyanoferrate (Co3O4–CuHCF) composite as an efficient supercapacitor electrode material	14
Improving electrochemical stability and electromechanical efficiency of ipmcs: tuning ionic liquid concentration	14
Ni/Co-based zeolitic-imidazolate framework pseudocapacitance in asymmetrical cells	14
COF-42 as sensory material for voltammetric determination of Cu(II) ion: optimizing experimental condition via central composite design	14
Modulation in the electronic structure of Ir-rich shell on AuIr solid solution as OER electrocatalyst for PEM electrolyzer	14
Removal of lindane using electrokinetic soil flushing coupled with air stripping	14
Polymer-free gel electrolyte and its application in TiO2-based electrochromic devices	14
CeO2 and PEDOT:PSS modified conducting paper for organophosphate pesticide detection	14
Bioelectricity production of microbial fuel cells (MFCs) and the simultaneous monitoring using developed multi-channels Arduino UNO-based data logging system	14
Carbon black-polytetrafluoroethylene electrode electrically activated persulfate for the treatment of metronidazole wastewater	13
Quantitative analysis of proton exchange membrane fuel cell degradation during idling using distribution of relaxation times	13
Electrocatalyst for ethanol oxidation reaction based on isatin-modified chitosan	13
Generation of surface texture on 2A50 aluminum alloy with electrochemical micromachining for tribological application	13
Algae-derived hard carbon anodes for Na-ion batteries	13
Multi-walled carbon nanotubes/polyaniline covalently attached 18-crown-6-ether as a polymeric material for the potentiometric determination of delafloxacin	13
Investigation of zinc electronucleation and growth mechanisms onto platinum electrode from a deep eutectic solvent for gas sensing applications	13
Facile synthesis and characterization of NiCo2O4-rGO binary for energy-storing application	13
Synthesis and electrochemical properties of Mo4/3B2Tx MBene as an anode material for lithium-ion batteries	13
An investigation of the work function and stability of chromium oxide thin films deposited by reactive magnetron sputtering	13
Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities	13
Improved stability of highly concentrated LiBF4/fluorinated ethyl acetate-based electrolyte solutions with a co-solvent for LiNi0.8Co0.1Mn0.1O2 positive electrodes in lithium ion batteries	13
Degradation of sodium lauryl sulfate and its effect during cobalt electrowinning	13
Electrochemical reduction of CO2 to useful fuel: recent advances and prospects	13
Insight on the corrosion inhibition performance of Glebionis coronaria plant extract in various acidic mediums	13
Sensitive detection of barium ion based on its enhancing effect on luminol electrochemiluminescence at cucurbit[7]uril-modified electrode	13

Tri- and tetra-metallic oxides anchored to nitrogen-doped carbon nanotubes as bifunctional electrocatalysts for rechargeable zinc-air batteries	12
Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance	12
Urea-based fuel cells on paper with micro-watt power generation to drive low power circuits	12
Electrochemical determination of 25-hydroxyvitamin D3 using conductive porous template based on gold-modified metal organic framework@mesoporous silica particles	12
B- and N-doped carbon coupled with different morphologies of MoS2 for hydrogen evolution reaction	12
Anodized TiO2 nanotubes using Ti wire in fluorinated ethylene glycol with air bubbles for removal of methylene blue dye	12
Electrolytic silver-tin (AgSn20) process for electronic finishing	12
Thermal runaway procedure and residue analysis of LiFePO4 batteries with different charging states under nail penetrating	11
Correction: Synergetic electrochemical performance of Nix–Mnx sulfide-based binary electrode material for supercapattery devices	11
The effect of surface preparation on the nucleation of zinc-nickel alloy electroplated in acidic electrolyte on steel substrate	11
Synthesis of green anode material for lithium-ion battery from orthodontic waste by fuzzy logic	11
Fabrication of a novel electrochemical sensor using conductive MOF Cu-CAT anchored on reduced graphene oxide for BPA detection	11
An ionic liquid-present immersion method for preparing cotton fiber-shaped Cu2O nanoparticles at room temperature	11
Enhanced capacity of LiCoO2 and graphite battery by using methylene methanedisulfonate as electrolyte additive	11
ZIF-67 nanocrystals for determining silver: optimizing conditions by Box–Behnken design	11
Correction: Enhanced Li‑storage performance of In‑doped Li1.21[Mn0.54Ni0.125Co0.125]O2 as Li‑ and Mn‑rich cathode materials for lithium‑ion batteries	11
Direct synthesis of vanadium pentoxide powder with carbon recombination as aqueous zinc-ion battery cathode	11
Investigating the influence of varying cobalt doping on the cross-sectional widths and surface composition of MnOx nanowires in the context of battery–supercapacitor systems	10
Study of lithium metal-based electrodes by electrochemical dilatometry	10
Facile synthesis of spinel nickel–manganese cobaltite nanoparticles with high rate capability and excellent cycling performance for supercapacitor electrodes	10
Optimization of CuS@NiO nanocomposite for enhanced charge storage in supercapacitors	10
Correction: Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities	10
Mechanistic insights into enhanced electroplating of ultra-thin copper foils using ADT-DMAP as a superior acridone-based leveler	10
Correction: Surface treatment and corrosion protection of mild steel by the oily extracts of olive mill waste cake	10
Simultaneous determination of paracetamol and codeine phosphate in combined tablets by an electrochemical method using TiO2/rGO modified glassy carbon electrode	10
Catalyst-free α-bromination of acetophenones by two-phase electrolysis	10
Effect of zirconium on the corrosion behavior of FeAl40Ti3B intermetallic compounds for use in solar water heaters	10
Investigation of urea oxidation as a potential anode reaction during CO2 electrolysis	10
Effect of anode passivation on ferrate(VI) electro-generation using ductile iron anode and application for methylene blue treatment	10
Evaluation and screening of Si-based anode materials in commercial Li-ion cells for electric vehicle applications	10
Mechanistic investigation of a novel aqueous binder CMC-NH4 enriched with electronegative elements on the performance of LiFePO4 cathode	10
Electrochemical techniques to investigate adsorption and desorption behavior of fibrinogen on a gold surface	9
Electrochemical detection of creatinine on Cu/carbon paper electrodes obtained by physical vapor deposition	9
Optimal current density for cathodic CeCC deposition on anodized AA2024-T3 aircraft alloy	9
Synthesis and properties of P-doped mesoporous carbon	9
Electrochemical behavior of additive manufactured TC4 alloy in different concentrated NaCl solutions	9
Preparation and coating modification of lithium-rich layered oxides Li1.2Mn0.54Ni0.13Co0.13O2 via Al2O3	9
Parametric study on the electrochemical performance and stability of PbO2-coated titanium electrodes for electrowinning applications	9
A single-step reduction and heteroatom doping of graphene oxide for enhancing super capacitive property	9
Kinetic and geometric considerations in modeling screen-printed electrode-based sensors	9
3D reticulated vitreous carbon as advanced cathode material in galvanic deposition process	9
Biodegradable iron-based foams prepared by the space holder technique using urea	9
Synergistic design of Mo-intercalated NiSe2: a binary transition metal chalcogenide for highly efficient bifunctional seawater electrolysis	9
Evaluation of antigen-antibody recognition by electrochemical impedance on AuNP-biopolymer electrode	9
Synthesis of Pd-Cu/TPPCu electrocatalyst for direct ethanol fuel cell applications	9
Superstrate-type photovoltaics with copper indium sulfide (CuInS2) fabricated by solution processes: correlation between interfacial charge transfer and solar cell performance	9
Insights into the electrochemical performance of manganese dioxide coated metallic foils as potential electrodes for supercapacitors	9
Fabrication of polycrystalline diamond films with various boron doping levels deposited on WC–Co electrode for organic pollutants oxidation	9
Electrochemical synthesis of PVP K30-AgNPs modelling based on ANN-LMP: Box-Behnken optimization for antioxidant and antibacterial activities	9
Exploring furfuryl alcohol as carbon coating agent for silicon/graphite anode active materials	9
Microwave-assisted synthesis of cadmium/reduced graphene oxide composite: an operative platform for highly specific electrochemical determination of bisphenol-A	8
Corrosion behavior of electrodeposited amorphous Ni–P coating by laser-induced crystal modifier	8
Composition and growth mechanism of nanoporous anodic fluoride films on stainless steel	8
Electrochemical sensing of phenolic pollutant catechol on LaNiO3 perovskite nanostructure platform	8
Characterization and applications of ion-exchange membranes and selective ion transport through them: a review	8
Non-precious Sn as alternative substitute metal in graphene-based catalysts for methanol electrooxidation	8
Kinetic and thermodynamic properties of La(III) on Molybdenum electrode in LiCl–KCl–LaCl3 melts	8
A new promising electrochemiluminescence probe based on ruthenium nanobeads/silver nanoparticles/graphene oxide modified electrode for ultra-trace analysis of bisphenol A	8
Reinforcing NiO microsphere structural stability via amorphous carbon sheets obtained from waste milk for lithium-ion capacitor application	8
Facile synthesis of hairbrush like FeVO4@C/CC anode material with enhanced electrochemical performance for alkaline ion batteries	8
Core–shell mesoporous silica-based ion-imprinted electrochemical sensor for the determination of trace Cd2+ in water	8
Understanding and preventing Cu–Sn micro joint defects through design and process control	8
Corrosion inhibition behavior of chalcone oxime derivatives on carbon steel in 0.5 M H2SO4	8
Lithium-ion batteries using metal foil-free electrodes toward sustainable battery circulation	8
NiZr2S4 bimetallic sulphide thin films: synthesis and multifunctional applications in nanotechnology	8
Voltammetric sensing of tryptophan in dark chocolate bars, skimmed milk and urine samples in the presence of dopamine and caffeine	8
In situ polymerization of meta nitro benzoic acid on graphite electrode as a mediator for the electrochemical oxidation of resorcinol	8
A novel electrochemical sensor for ultra-sensitive detection of nitrite based on the synergistic effect of surfactant and KTiTaO5	8
Label-free electrochemical immunosensor based on AuNPs/coiled carbon nanotubes/chitosan-nanocomposites for detection of carcinoembryonic antigen	8
Reverse electrodialysis for power production with ion-permselective spacers and its optimization	8
Enhanced the electrochemical performance of CoMgS nanocomposite electrode with the doping of ZnO for supercapacitor-battery hybrid device and photochemical activity	8
Electrochemical corrosion behavior study of different porosity zinc scaffolds in simulated body fluid (SBF) for biomedical applications	8
Covalent functionalization of graphene oxide with l-lysine for highly sensitive and selective simultaneous electrochemical detection of rifampicin and acetaminophen	8
Stacked microporous layers with a rational gradient in pore size enhance the performance of proton exchange membrane fuel cells	8
Specific unlocking of the butterfly effect: nanointerface-based electrochemical biosensing of adenosine triphosphate and alkaline phosphatase	8
Evolution and stability of 2-mercaptobenzimidazole inhibitor film upon Al alloy 6061	8
Retraction Note to: Structural and electrochemical impedance spectroscopic studies on reactive magnetron sputtered titanium oxynitride (TiON) thin films	8
Testing the performance of dye sensitized solar cells under various temperature and humidity environments	8
Improvement of performance stability of electrolytic copper foils by bi-component additives	7
Voltammetric determination of lactic acid in milk samples using carbon paste electrode modified with chitosan-based magnetic molecularly imprinted polymer	7

Date seed-derived porous carbon for advanced Li–Se battery applications	7
Polythionine and gold nanostar-based impedimetric aptasensor for label-free detection of α-synuclein oligomers	7
The effect of anode degradation on energy demand and production efficiency of electrochemically precipitated struvite	7
Photoelectrocatalytic oxidation of progesterone in water using carbon-coated titanium anode and vanadium pentoxide catalyst: dynamics of steroid removal	7
Electrochemical detection of cortisol using a structure-switching aptamer immobilized on gold nanoparticles-modified screen-printed electrodes	7
Optimizing Pt catalyst performance for oxygen reduction reaction via surface functionalization of Vulcan XC-72R carbon black support	7
Correction: NiZr2S4 bimetallic sulphide thin films: synthesis and multifunctional applications in nanotechnology	7
Electrochemical and quantum chemical study to assess the role of (2E)-2-(furan-2-ylmethylidene) hydrazine carbothioamide as inhibitor for acid corrosion of mild steel	7
Electrochemical sensor based on epoxy-functionalized BEA nanozeolite and graphene oxide modified glassy carbon electrode for bisphenol E determination	7
Powering up and cleaning up: NiS:Cu2S:Nd2S3 thin film as a supercapacitor electrode and photocatalyst	7
Modification of the single tetraethoxysilane-treated anodized aluminum by the trimethoxy(propyl)silane retreatment for corrosion protection	7
A new method for optimising polarisation point in electrochemical impedance based measurements	7
Chemical-physical characterisation of 5-Phenyl-1H-tetrazole inhibitive behaviour: a new non-toxic compound for a sustainable protection of Cu-alloys	7
A novel environmentally friendly mixed complex bath for electrodeposition of a thin film of crack-free FeCrNi stainless steel-like	7
Preparing an ultra-smooth TaW alloy surface with chemical mechanical polishing via controlling galvanic corrosion	7
Field-use device for the electrochemical quantification of carbamazepine levels in a background of human saliva	7
Enhanced cycling performance of lithium-ion batteries with V2O5 as cathode by Co-doping for structural stability	7
Fabrication and optimization of ZnO-multiwalled carbon nanotubes modified glassy carbon electrode for the detection of 2-(4-(1-isonicotinoyl-5-aryl-4,5-dihydro-1H-pyrazol-3-yl)phenoxy)-N-arylacetamide	7
Evaluating Zn ferrite (ZnxFe3-xO4; 0 ≤ x ≤ 1) for alkaline water oxidation: electrochemical and spectro-electrochemical study	7
Experimental investigation of machining rate, geometrical accuracy and optimization of machining parameters in electrochemical micromachining of stainless steel 304	7
In-situ electrokinetic remediation of salt-impacted soil at a decommissioned well site	7
Electrochemical determination of fenuron herbicide in environmental water samples by electro-reduced graphene oxide sensor	7
Effect of electroosmotic and hydraulic flow on the desalination of soils	7
Roles and mechanistic analysis of adenine as a green inhibitor in chemical mechanical polishing	7
Conductivity monitoring of PBASE functionalized CVD graphene electrode for biosensor applications	7
Reaction pathway of nitrate and ammonia formation in the plasma electrolysis process with nitrogen and oxygen gas injection	6
Electrochemical performance of NiO and Ni(OH)2-based supercapacitors derived from recycled Ni–Ti rotary files: a hydrometallurgical approach	6
Electrosynthesis of poly (4-amino-3-nitrostyrene) film and its characterization	6
The fabrication of TiO2/AgCNF/Nafion/GC electrodes for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II) by optimizing the porosity of electrospun TiO2 nanofibers	6
Assessing LiF as coating material for Li metal electrodes	6
Electrochemical sensor for detection of dopamine and tyrosine using CdS–C quantum dots modified electrode	6
Surface treatment and corrosion protection of mild steel by the oily extracts of olive mill waste cake	6
Optimization of electrolyte co-additives, TiO2 thickness, and dye concentration for the enhanced performance of dye-sensitized solar cells	6
Bioelectrochemical assessment of a novel electrogenic Bacillus altitudinis AC11.2 for electricity generation in microbial fuel cell (MFC) system	6
Electrocatalytic oxidation of hydrazine using Mn(II)-Y mesoporous materials modified carbon paste electrode	6
A novel collaborative signal amplification biosensor based on sandwich-type composite film for ultrasensitive detection of rhEPO	6
Product formation during discharge: a combined modelling and experimental study for Li–O$$_2$$ cathodes in LiTFSI/DMSO and LiTFSI/TEGDME electrolytes	6
Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples	6
PEM fuel cell applications of doped (Ni, Zr) metal alloyed Pt/C cathode catalysts	6
Enhanced electrocatalytic lead-based anodes with phosphorylated lignin for oxygen evolution reaction in zinc electrowinning	6
Effect of Al and Zn addition on the active behavior of the high P pig iron-based composite anodes	6
Numerical study of heterogeneous porosity in gas diffusion layers of high-temperature proton-exchange membrane fuel cells	6
Preparation and evaluation of a stable SmBa0.75Sr0.25Fe2O5+δ cathode material for solid oxide fuel cells	6
Stripping voltammetry meets chemometric: a powerful duo for pinpointing harmful As3+ ions in water	6
Electrochemical evaluation of the effect of anode to cathode surface area ratio on power generation in air-cathode microbial fuel cells	6
An ultrasensitive non-enzymatic electrochemical cholesterol sensor based on copper foam/CuO/Pt/ p-phenylenediamine molecularly imprinted polymer	6
Novel approach for rapid electrochemical profiling of Escherichia coli cell-free supernatant	6
Corrosion evaluation of Ti–6Al–4V manufactured by electron beam melting in Ringer’s physiological solution: an in vitro study of the passive film	6
Bi-phasic BiPO4 prepared through template-assisted hydrothermal method with enhanced electrochemical response for hybrid supercapacitor applications	6
Hierarchical MnO2/hollow carbon spheres composites for asymmetric supercapacitors with enhanced performance	6
Fabrication of a selective and sensitive electro-synthesized molecularly imprinted polymer-based electrochemical sensor for the determination of xanthine	6
Comparison the anticorrosion behavior of three symmetrical Schiff-base ligands: experimental and theoretical studies	6
Incorporation of nickel particles into a polyaniline thin film for non-enzymatic glucose sensing in alkaline medium	6
Electrochemical self-signal identification of Kirsten rat sarcoma virus oncogene based on riboflavin 5′-(trihydrogen diphosphate) functionalized WS2 nanosheets	6
Glycerol determination by chronoamperometry using Ni(OH)2/RGO on carbon paste electrode	6
Analyzing the influence of carboxymethyl cellulose binder viscosity on the electrochemical performance of the mesocarbon microbead anode in lithium-ion batteries	6
Microbial fuel cell-based sensor for Enterobacter sp. KBH6958 activity monitoring during hydrogen production: the effects of pH and glucose concentration	6
Evaluating single-crystal and polycrystalline NMC811 electrodes in lithium-ion cells via non-destructive EIS alone	6
New binder-free anode material for lithium-ion batteries based on ZnO nanoflowers/Zn electrode decorated by multiwall carbon nanotubes	6
A comparative study of Pd/rGO and Pd–Cu/rGO toward electrooxidation of low ethanol concentrations for fuel cell-based breath alcohol analyzer application	6
Biocorrosion studies of a novel Mg70Al18Zn6Ca4Y2 low entropy multicomponent alloy in different simulated body fluids	6