Journal of Chemical Engineering of Japan

Papers
(The median citation count of Journal of Chemical Engineering of Japan is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)
ArticleCitations
Application of Eco-Feed Produced by Aurantiochytrium sp. L3W Using Solid Food Waste for Producing Hirodai-dori Products Containing Omega-359
Effect of Operation Conditions on Low Concentration CO 2 Adsorption of Zeolite 13X for in-Vehicle Air Quality49
Liberation of Nickel-Cobalt-Manganese-Based Active Materials from Cathode Composites by Dry Grinding Using a Calcium Oxide Grinding Aid15
A Refinery Production Scheduling Model with Operation Mode Transition Based on Variable Driven Modelling Approach15
Formation of Dense Yttria-Stabilized Zirconia Thin Film by Aerosol Deposition Method for Metal-Supported Solid Oxide Fuel Cell Applications14
Improved Engine Efficiency and Clean Combustion of Non-Edible Biodiesel/Alcohol Blends and Hydrogen Enrichment Strategy13
Continuous Anti-Solvent Crystallization of Glycine β-form Crystalline Particles by Taylor Vortex Crystallizer12
Catalytic Performance of Solid Base Na-ZrO 2 in Subcritical Water12
Effect of Placement of Packing Material Against Gravity on the Effective Wetting Area and Gas Absorption Efficiency of Absorption Equipment Packed with Glass Fiber Filter11
Effect of High-Power Ultrasound Washing on Arsenic-Polluted Soil10
Numerical Simulation Study of the Effect of Liquid Depth on the Stability of Thermal Marangoni Convection in a Shallow Cavity9
Permeation Characteristics of HFC-32 and HFC-125 through Dimethoxydiphenylsilane-Derived Silica Membranes Prepared via the Counter-Diffusion Chemical Vapor Deposition Method9
Development of Concentration-Prediction Models in Multiple Manufacturing Environments Using NIR Spectroscopy9
Acceleration of Sludge Drying by Resin Emulsion Addition: Drying Behavior and Property Changes9
A Mass-Balance-Consistent Process Inventory Model for Ion-Exchange Resin Catalyzed Biodiesel Production8
Prediction of Energy Concentration during Microwave Heating with a Thermal Diffusion Dimensionless Number7
Data-Driven Optimization of Au Nanoparticle Synthesis with Automated Flow Microreaction System7
Continuous-Flow Asymmetric Aldol Addition Using Immobilized Chiral Catalyst on Organogel-Based Porous Monolith7
Particle Circulation Modeling of a Bulkhead-Mounted J-Type Loop Seal in a Circulating Fluidized Bed7
Biodiesel Production by Lipase-Catalyzed Transesterification of Triolein in Acetone Using a Free-Form Lipase from Porcine Pancreas7
Modeling of Hollow Cylindrical Catalytic Pellets – Analytical Solutions for First Order Reaction6
An Application of Modified S-CLSVOF Method to Kelvin-Helmholtz Instability and Comparison with Theoretical Result6
Hydrogen Produced from Simulated Biogas Using a Membrane Reactor with a Dimethoxydimethylsilane-Derived Silica Membrane Operated under Pressure and without Sweep Gas6
Effects of Pore Size and Surface Modification on the Alumina Microfiltration Membrane Fouling in MBR with Backwashing6
Advanced Production Management for Chemical Plants: Design and Evaluation of KPIs Suitable for Comprehensive Management of Steam Heat Loss6
Editorial Board5
Cell Membrane-Camouflaged Nanoparticles: A Promising Biomimetic Platform for Tumor Therapy5
A Short Review and Future Prospects of Biomass-Based Solid Polymer Electrolytes for Improving the Performance of Lithium Metal Batteries5
Study of Grounded Pole Atomized Corona Discharge Coupled with Screen Dust Collection Pole Laminated Dust Collector5
Numerical Analysis of Liquefaction and Vaporization Processes in a CO 2 Capture System Recovered in the Form of Dry Ice5
Strategy of Development on Zeolite Membrane for Forward Osmosis Operation; Effects of Structural Parameter of Support Layer and Si/Al Ratio of ZSM-5 Layer on Water Flux5
Design of Highly Water-Permeable Nanoporous Membrane by Arrangement of Regular Atomic Charges on the Pore-Wall: A Non-Equilibrium Molecular Dynamics Study5
Editorial Board5
Development of an Ammonia Generator for Demonstration Tests5
Effect of Dehydration Conditions on Secondary Reaction Suppression in Calcium Chloride Ammonia Absorbers5
Illuminating the Future of E-Methanol: Solar Energy Pathways and Prospects4
Development of Ni Nanoparticle Encapsulated with Silicalite-1 Catalyst for High Activity Steam Reforming of Bioethanol with High Sintering Resistance and Coke Suppression4
Novel Prediction Model Based on Two-Film Theory for Ammonia Distribution Coefficient in Heat Recovery Steam Generator of Gas Turbine Combined Cycle Power Plants4
Carbon Deposition Assisting the Enhancement of Catalytic Activity with Time-on-Stream in the Dehydrogenation of Isobutane over NiO/Al<sub>2</sub>O<sub>3</sub>4
Analysing the Relationship between Mechanical Properties and Inner Structure of LLDPE Virgin Film for Optimizing Extrusion Condition4
A Comprehensive Design Approach for Injectable Manufacturing Processes considering New Technologies and Operational Aspects4
Manipulating Cracks with Selective Drying in Binary Solvent Mixture Suspensions4
Glycine-Mediated Paclitaxel Dispersion in a Phospholipid Complex4
Fault Detection and Isolation of Industrial Fermentation Process Based on Semi-supervised Convex Nonnegative Matrix Factorizations4
Enhancement of the Catalytic Activity Associated with Carbon Deposition Formed on NiO/Al<sub>2</sub>O<sub>3</sub> during the Dehydrogenation of Ethane and Propane4
A Comparative Study of the Effect of Sodium Aluminate, Magnesium Oxide, and Calcium Hydroxide on the Concentration of Silicon Dioxide in RO Water Plants4
Hollow-Form LaNiO<sub>3</sub> Perovskite Catalyst for PM Combustion Using Carbon Fibers as a Template4
Anion Exchange Membrane Water Electrolyzers: An Overview4
Data-Driven Analysis of Monoclonal Antibody Charge Variants in Perfusion Cultures4
A Local Information Entropy-Based Point Cloud Simplification Algorithm for Hazardous Chemical Warehouses4
Optical Analysis of Dry Reforming of Methane in Microwave-Induced Plasma at Atmospheric Pressure4
Comparison of Hydrogen Reduction Technologies for the Effective Purification of CO 2 Methanation Product Gas Through Process Simulation3
Adsorption and Desorption Characteristics of Cd(II) Ions onto the Adsorbent Derived from Algae3
Development of Multi-Phase Solid Formation for Dissolution Enhancement of Higher Drug Loading Phase-Separated Melt3
Novel Identification Method of Seawater Contamination into Steam-Water Circuit Including Carbon Dioxide of Power Plants Based on pH, Specific Conductivity, and Cation Conductivity3
A Numerical Study for the Growth of InGaSb Crystals with a Flatter Interface by Vertical Gradient Freezing under Normal Gravity and Utilizing Bayesian Optimization3
A Comprehensive Computer-Aided Review of Trends in Heterogeneous Catalysis and Its Theoretical Modelling for Engineering Catalytic Activity3
Enhanced Activity of Ni/Al 2 O 3 Catalysts by CO 2 3
Bayesian Optimization for Favourable Suspension Culture of Orbitally Shaken Bioreactors with a Hollow Cylinder Wall3
Collaborative Optimization of Oil Blending and Distribution in Refinery Based on Variable-driven Method3
Performance Intensification of CO 2 Methanation by Co-Feeding Oxygen Over Various Ru-Based Catalysts3
Enabling Metal Sustainability with Polymer Inclusion Membranes: A Critical Review3
Preparation of Rice Bran Protein Solutions Using a Water-Based Extraction Process3
Effect of Gas Volume Expansion on Bubble Behavior in Fluidized Catalyst Beds3
Interaction between Al<sup>3+</sup> and Poly(acrylic acid) (PAA) in Aqueous Solution—Formation Modes for the Al–PAA Complexes3
Specific Extraction of Aspartic Acid and Tyrosine with Aqueous Two-phase Systems Formed by Hydrophilic Organic Solvent and Monomeric Sugars3
Persistent Free Radicals (PFRs) Formed in Pyrolyzed Synthetic CHO-Type Polymers: Novel Raw Material for PFR and Better Understanding for Its Formation3
VARAT: Variable Annotation Tool for Documents on Manufacturing Processes3
Correction3
Kinetic Analysis on As(III) Oxidation in a Fixed-Bed Flow Reactor Filled with a Supported Platinum Catalyst3
Integrating Genetic Programming with Dimensional Analysis and Data-Splitting for Heat Transfer Estimation of Nanofluids3
Process Analytical Technologies (PAT) for Accurate Quantification of Monoclonal Antibodies (mAbs)3
Research on Simulation Analysis of Major Safety Risks and Control Countermeasures in Chemical Parks3
Light-Driven Chemical Production with Quantum Dot-Biohybrid System: A Review3
Modeling of Adsorbers Containing Core-Shell Adsorbents with Various Morphologies by Shrinking Core Model – The Effects of Adsorber Types and Adsorption Kinetics3
Optimization of Set Points of State Variables in Air and Coolant Systems of Fuel Cell Systems2
Influence of Polymer Additives on Reactive Crystallization of Benzoic Acid2
Fast Prediction of Heat Flux Distribution in Boilers Using Computational Fluid Dynamics Simulation Data via Multi-Extreme Learning Machines2
Analysis of Oxidized Pt Species on a Connected Pt–Fe Catalyst with Enhanced Oxygen Reduction Activity Probed by Electrochemical XPS2
Enrichment and Identification of Pancreas Lipase Inhibitory Peptides from Food Protein Hydrolysate Using Group-Selective Peptide Adsorption Support2
Applicability of Gravity Separation to Recycling Biodegradable Plastics2
The Effects of Zone Volume and Gravity on Thermo-Solutal Marangoni Convection Instability in a Half-Zone Model of Float-Zone Growth of SiGe2
Theoretical Analysis of Simulated Moving Bed Reactor for Rapid Reversible Acetalization of Glycerol with Acetone to Synthesize Solketal2
Visible-Light-Driven Photocatalytic Activity of Ag-Loaded TiO 2 Nanoparticulate Thin Film Fabricated via PECVD-PVD Method2
Phase Diagrams of the Quaternary System Na + , Mg 2+ , NH 4 + //SO 2
Modeling the Solubility of Ferrocene in Supercritical CO 2 via PC-SAFT Using Solubilities Data Measured in Organic Solvents2
Highly Dispersed ZrO 2 Modified Cs/SiO 2 -Based Catalyst via Ligand–Assisted Strategy for Aldol Condensation of Methyl Acetate wit2
The Identification and Characterization of a New Carbapenem CS-023 Solvate Polymorph Achieved by the Appropriate Crystal Washing and Drying2
Arc Characteristics of Various Alcohol Solutions in Water Plasma with a Tunable Mist Generation2
Mixer-Independent Soft Sensors to Predict Tablet Critical Quality Attributes in a Continuous Direct Compression Process2
A Combined Immersed Boundary Method for Flows with Scalar Transport2
Green Leaching of Metallic Platinum Using an Ionic Liquid with Synergistic Organic Acid–Chlorinating Agent Additives2
Improvement of a Simple Coupled VOF with LS (S-CLSVOF) Method2
Scenario Analysis of Vaccine Supply for COVID-19 in Japan Using Mathematical Models of Infectious Diseases2
Fractional Order Internal Model PID Control for Pulp Batch Cooking Process2
A Microstructured Cover Flow Mixer for Hydrothermal Synthesis of ZnO Nanoparticles in Supercritical Water2
New Approaches for Prediction of Flow Regime Boundaries and Overall Gas Holdups in a Bubble Column Operated with Aqueous Solutions of 2-Pentanol2
Partition of Amino Acids in Aqueous Two-Phase Systems Comprising Hydrophilic Organic Solvents and Salts2
Extraction of Organic Acids with Hydrophobic Eutectic Mixtures Containing Terpenoids and Decanoic Acid2
Fast Prediction of Transport Structures in the Melt by Physics Informed Neural Networks during ‘VMCz’ Crystal Growth of Silicon2
Using Confocal Laser Scanning Microscopy to Analyze the Mass Transfer in the Protein A Medium of a Silica Matrix2
Effects of Aeration on the External Shape of Crystalline Particles in Reactive Crystallization with pH Modulation2
Estimation of the Just Suspension Speed of Mixed Particles in a Solid-Liquid Stirred Tank2
0.14807605743408