Journal of Materials Science

Article	Citations
TiO2-embedded, exfoliated layers of phosphorus-doped carbon nanodot for tunable optical limiting	189
Review on the application of density functional theory to predict the color, electronic, and optical properties of ceramic pigments along with experimental confirmation	176
Large strain improvement of lead-free (1−x) Bi0.5Na0.42K0.08Zr0.02Ti0.98O3–xBa(Nb0.5Fe0.5)O3 piezoelectric ceramics	163
Fabrication of micron-sized three-dimensional porous Al from an Al–Zn monotectoid alloy via selective etching and Al passivation	139
Thermomechanical fatigue behavior and its life prediction of AlSi9Cu3.5 cast alloy	132
Evolution of iron-based raw materials and their effect on the properties of MgO-Al-C slide plate materials	132
Ultrasonic dispersion of multi-walled carbon nanotubes aided by pyrene-polyether dispersants and Al2O3 particles	131
Mn-MOFs derived manganese-based oxide by regulating atmosphere as zinc-ion battery cathode	129
Properties optimization analysis of amorphous ribbons in acoustic magnetic labels	127
Review: thermoelectric fibers—material design, performance enhancement, and emerging applications	127
Effects of boron nitride on the thermal properties of melamine–urea–formaldehyde/paraffin microcapsules for thermal management	120
Precise lithiophilicity regulation of atomically dispersed Znn-anchored C2N matrix for uniform lithium deposition	104
Aluminum matrix composites reinforced with multi-walled carbon nanotubes and C60 manufactured by laser powder bed fusion	96
Surface microstructure and corrosion resistance characterization of Mg-based amorphous alloys	91
Design of TiO2-X nanotubes with controllable oxygen vacancy concentration and performance study of selective oxidation of benzyl alcohol	79
Construction of honeycomb-like hematite superstructure on Fe foam and their application in Fischer–Tropsch synthesis	78
A high N and W heat-resistant martensitic cast steel with balanced tensile strength and creep resistance achieved by Laves and μ intermetallics	78
Substituted polythiophene-based sensor for detection of ammonia in gaseous and aqueous environment	77
Anisotropy in the compression strength of hot-pressed ceramics	76
Fluorination of the tertiary carbon at the edge of graphene oxide	75
Understanding the anisotropic mechanical behaviour and dislocation analysis of additively manufactured CoCr alloy: insight from atomistic simulation	75
Effects of aging time on the microstructure and mechanical properties of Fe–Mn–Al–C–Nb lightweight steel	74
Toward the correlation of indentation hardness in micro- and nano-scale: understanding of indentation edge behaviors in Fe–Cr alloys	74
Microstructure and magnetic properties of vapor-grown CdTe:Cr crystals with doping-induced precipitates	72
Anomalous grain growth in S-doped Ni and comparative insights from the Al-Sn alloy exhibiting grain boundary wetting transition	67

Liquid crystal photo-cross-linking phenomenon: synthesis of disubstituted polyacetylenes and emission from liquid crystal	65
The thermodynamics of multicomponent high-entropy materials	64
A novel solid-state poly(urethane-b-siloxane) block copolymer-based electrolyte with flexibility and high ion transference number for lithium metal battery	63
Novel composite materials H2V3O8/PEDOT:PSS as a promising cathode material for rechargeable lithium–ion batteries	63
Friction and wear characteristics of iron-based composites fabricated by hot isostatic pressing	63
Thermal spray to embed optical fibers for the monitoring and protection of metallic structures	63
The effect of graphene synthesis duration and copper textures on corrosive behavior and surface wettability	63
Ionic liquid-functionalized carbon dots for inhibiting amyloid aggregation and oxidative stress	63
Enkephalin loaded and RGD decorated PLGA–poloxamer nanoparticles for effective targeting in cancer cells	63
Synergy between tea polyphenol-modified graphene oxide and zinc oxide to enhance wear and corrosion resistance of polyester coatings	62
Electric field-assisted soldering of glass and copper with Zn-10Al-12Sn solder	62
Synthesis of castor oil-based glycidyl carbamate polyurethane elastomer and its effect on toughening of polyoxymethylene	61
Shallow donor level of Hs-N4 co-doped diamond under strain: an ab initio study	61
3D porous MXene/RGO aerogels induced by template method for high-capacity supercapacitors	61
Preparation and properties of Fe–Mn–Si–Cr–Ni shape memory alloy	58
Controlling transformation of sorbitol into glycols over Ru-WOx modified biomass-derived N-doped carbon	57
Review: Sustainable engineering of bio-aerogels in thermal insulation applications	57
Preparation of NaNbO3 nanoplates and their application in the synthesis of arylidene indan-1,3-diones, functionalized C-3 isobenzofuranones and Meldrum’s acid derivatives	57
Investigations of flexible pseudocapacitive electrodes consisting of ternary V2O5/PEDOT/rGO hybrids in Li-ion containing aqueous and organic electrolytes	57
Impact of oxygen concentration at the HfOx/Ti interface on the behavior of HfOx filamentary memristors	56
Entrapping polysulfides using mesoporous carbon hollow spheres with controlled internal SiO2 content for lithium–sulfur batteries	56
F-doped carbon hollow nanospheres for efficient electrochemical oxygen reduction	56
Controlling CuCrZr alloy properties and microstructure rapidly by pulsed electric treatment (PET)	56
Lamellar metal oxide and organic hybrid sensor for room temperature alcohol gas detection	55
Effects of graphene oxide on shearing performance of C–S–H composites: a molecular dynamics study	55
Molecular dynamics study of domain switching dynamics in KNbO3 and BaTiO3	54
The role of electrical property in determining the response of 20H-80S composite thin films fabricated for biological applications	54
Analysis and correlation between electrochemical and theoretical findings for inhibiting carbon steel corrosion in acidic environments with two carboxamide derivatives	54
Vacuum brazing of biomedical TNZ alloy to ZrO2 ceramic using Sn–Zr filler: interfacial microstructure and mechanical properties	54
Atomic-scale investigation on diffusion mechanism of immiscible Mo/Cu system under different temperatures and electric field	53
The robust fluoride-free superhydrophobic thermal energy storage coating for efficient energy storage and thermal management	53
Precipitation kinetics and creep properties of multicomponent Ni-based superalloys	52
Radiation-induced structural transformations in the Ti-Ni-Cu-Zr shape memory alloy	51
Improvement of capacitive and resistive memory in WO3 thin film with annealing	51
Dislocation-based high-temperature plasticity of polycrystalline perovskite SrTiO3	50
One-step synthesis of biomimetic copper–cysteine nanoparticle with excellent laccase-like activity	50
Interface modulation combined with redox additive strategies for improving solid-state Na+ ion supercapacitor performance	50
Enhanced properties of silica aerogels/melt-blown nonwoven composites: a comparative study of supercritical CO2 and freeze-drying methods	50
Fabrication of shape-tunable micromotors based on mass transfer and phase separation	49
Microstructure evolution and comprehensive properties improvement of Mg-9Li-3Al-Zn alloy by friction stir additive manufacturing	49
Automated analysis of platelet microstructures using a feature length orientation space	49
Synthesis and antifouling properties of carbazole amide derivatives with fluorescent functional structure	49
Review: external influences on the strength of early-aged concrete	48
Study of the crack propagation characteristics of brittle materials at low temperatures based on 3D-ILC	47
A fluoride-free hydrophobic composite coating with mechanical robustness and anti-UV aging	47
Methane decomposition to high-quality carbon nanotubes: well-distributed NiCo alloy catalysts derived from layered double hydroxide	47
Numerical and experimental studies on transport processes in laser-based direct energy deposition	46
Innovative warm rolling plus electromagnetic shock treatment for high-quality M50 bearing ring manufacturing	45
Molecular simulation and curing-forming of ultraviolet/thermal-sensitive resin diamond composites for microstructured polishing tool	45
Structural, half-metallic, electronic, magnetic and pressure-induced elastic changes of PdVSi, PdVGe, PdVSn, and PdVSb alloys	45

Rationally designed cyclic peptides and nanomaterials as ‘next-generation’ anti-amyloid therapeutics	45
Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy	45
Effect of low aging temperature and the reversion of martensite on the mechanical behavior of a 2304 lean duplex stainless steel	45
Solute diffusion in polycrystals with migrating grain boundaries: phase-field approach	45
Alendronate-loaded gelatin microparticles as templating agents for macroporous magnesium phosphate-based bone cements	45
Redox slurry electrodes: advancing zinc-based flow batteries for sustainable energy storage	44
Effect of carbides on hardness and corrosion resistance of high-speed laser cladding bainitic steel coating	44
Review: biomedical applications of novel MXene nanocomposites	44
In situ probing of thermal stability of functionally graded Nb/Zr nanolaminates	44
Tin sulfide supported on cellulose nanocrystals-derived carbon as a green and effective catalyst for CO2 electroreduction to formate	44
Surface-functionalized luteolin-loaded nanocarriers successfully delayed lung cancer progress in rats	43
Multi-scale synergistic regulation of hierarchical porous Ni@NiSe cathodes with low voltage gap, high capacity and long-term cycling stability in Li–CO2 battery	43
Experimental and numerical studies of relationship between microstructures and mechanical properties in friction stir welding under water	43
Insights on oxide ion transport in yttria-doped ceria from molecular dynamics simulations	42
The method of introducing oxygen vacancy into La0.8Sr0.2FeO3-based catalyst: enhancing the ORR and OER performance	42
Synergistic self-assembly of MXene monolayer dispersions doped with NiFe2O4 nanoparticles for high-performance microwave absorbers	42
In-situ grain refinement induced by multiple twinning in 316L austenitic stainless steel fabricated by laser powder-bed fusion	42
Flux synthesis of Bi2MO4Cl (M = Gd and Nd) nanosheets for high-efficiency photocatalytic oxygen evolution under visible light	42
High-efficiency reduction of 4-nitrophenol: application of rare-earth-doped composite material NaLa(MoO4)2:Ce3+/AgBr	41
RETRACTED ARTICLE: Damage effect of aggressive dissolved salt media on asphalt binder in an aqueous environment	41
Surface grain boundary engineering in 304 stainless steel by means of mechanical grinding treatment-induced gradient plastic strain and annealing	41
Unveiling electrical anisotropy of hierarchical pyrolytic biocarbons from wood cellulose	41
Excellent combination of cryogenic strength and ductility of a metastable Fe65Ni15Co8Mn8Ti3Si medium entropy alloy through the exceptional deformation-induced martensitic transformation	40
Synergistic strengthening effect of WC and Mo in WC/FeCoNiCrMo high-entropy alloy cladding layers	40
Design of TRIP steel with 1180 MPa grade by integrated computational materials engineering	40
Orthogonal origami graphene reinforced metal nanocomposites achieving isotropic auxeticity and quasi-zero stiffness	40
Review: research progress and future development of high nitrogen steel welding	40
Aqueous synthesis of Zn-based ternary core/shell quantum dots with excellent stability and biocompatibility against different cell lines	40
The helium-vacancy complexes and helium bubbles formation mechanism in chromium: a comprehensive first-principle study	39
Enhanced high overall performance of solution-processed ITO/IGO thin-film transistor via heterogeneous-bilayer channel	39
Improving the temperature sensitivity of graphene oxide-based fire alarms using graphene oxide precursors with thermally labile oxygenated groups	39
Superhydrophobic coating with excellent robustness and UV resistance fabricated using hydrothermal treated lignin nanoparticles by one-step spray	39
Some insights into the high temperature phase stability of the BCC + B2 microstructure in aluminum containing refractory high entropy alloys	39
Review: functionalization of biopolymer-based electrospun nanofibers for wound healing	38
Engineering electron density and structural properties of CuO anode material via calcination and in situ synchrotron XRD for enhanced lithium-ion battery performance	38
Facile preparation of copper nanoparticles-decorated reduced graphene oxide for the catalytic reduction of water toxins	38
Molecular modelling of graphene nanoribbons on the effect of porosity and oxidation on the mechanical and thermal properties	38
Development of Quercetin-loaded polyvinyl-alcohol/gelatin nanofibrous coating over Ti–6Al–4V bone implant with improved antibacterial and bioactive characteristics	38
Investigation of quench sensitivity of mechanical and corrosion properties in 2050 aluminum alloy	38
A new texture descriptor for data-driven constitutive modeling of anisotropic plasticity	37
The suitability of common reed (Phragmites australis) for load-bearing structural materials	37
Microstructure and properties of CoCrFeNi-based multi-principal element alloys containing C and Sc	37
Functionalized linker to form high-symmetry adsorption sites in micropore COF for CO2 capture and separation: insight from GCMC simulations	37
Experimental study of doped zinc aluminate nanoparticles by bottom-up approach for microstrip patch antenna applications	37
Core–shell structured Fe3O4@SnO2-reinforced self-healing polyurethane composite films with enhanced electromagnetic shielding performance	37
Structure and electrical transport properties of electrospun carbon nanofibers/carbon nanotubes 3D hierarchical nanocomposites: effect of the CCVD synthesis conditions	37
Positively charged loose nanofiltration membranes prepared by a green ionic cross-link method	37
Mechanical property heterogeneity in Inconel 718 superalloy manufactured by directed energy deposition	36
Assessing thermo-mechanical and wetting properties of epoxy/SBA-15 nanocomposite	36
Synthesis and electromagnetic wave absorption of novel Mo2TiC2Tx MXene with diverse etching methods	36
Mechanistic insights into the atomic layer deposition of GaN using TMG and NH3	36
High-power, high-energy solid oxide fuel cell using lignosulfonate as energy source and Fe2O3 as pseudo-fuel	36
A zwitterion-based hydrogel with high-strength, high transparency, anti-adhesion and degradability	36
Review: nanoSPD-produced metallic materials for advanced medical devices	36
An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites	36
Generative AI-enabled microstructure design of porous thermal interface materials with desired effective thermal conductivity	35
Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study	35
Influence of stress on the electromechanical properties and the phase transitions of lead-free (1 − x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3	35
Silk fibroin/chitosan pH-sensitive controlled microneedles	35
A DFT bottom-up approach on non-fullerene acceptors: what makes highly efficient acceptors	35
Review: recent advancements in photodetection utilizing inorganic, organic low-dimensional materials and their hybrids	35
Extraordinary electrical performance and uncommon transport behavior in the mullite/cordierite composite ceramics	35
Flexible nano-piezoelectric membranes with spontaneous electric field generation for bacteria elimination and wound healing	35
Oxidation-induced stiffening versus weakening in semicrystalline polymers	35
Microstructure simulation of AA2219 alloy in hot/warm forming and heat treatment using cellular automata methods	35
Influence of medium- and high-entropy alloy fillers on microstructures and corrosion behaviour of AA5083 plates joined by GTAW process	35
Validating a mean-field theory via large-scale phase-field simulations for abnormal grain growth induced by nonuniform grain boundary properties	34
Rose-like Cr–Fe robust super-hydrophobic surfaces with high adhesion and corrosion resistance	34
Grain boundary diffusion of dysprosium using DyF3 dip-coating method to enhance the magnetic properties of sintered Nd-Fe-B magnet	34
Synthesis of N-deficient g-C3N4/epoxy composite coating for enhanced photocatalytic corrosion resistance and water purification	34
A review on copper-based nanoparticles as a catalyst: synthesis and applications in coupling reactions	34
Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics	34
Effects of in-situ BN coating on thermostructural properties of SiCf/SiC composites prepared via PIP process	34
Microstructural and tribological performance of Ti6Al4V alloy modified by laser surface texturing	34
Highly flexible and sensitive Ti3C2 MXene@polyurethane composites for piezoresistive pressure sensor	34
Piezoelectric photocatalytic PVDF-g-IL nanocomposite membranes incorporated with ZnO@PDA-Ag nanoparticles for high-efficiency dye wastewater separation and purification	34
Microstructural refinement and intermetallic strengthening in Zn–Mn alloys	34
Thermoplastic polyurethanes: synthesis, fabrication techniques, blends, composites, and applications	34
Development of aluminum matrix composites through accumulative roll bonding: a review	34
Unravelling the role of cationic Ni2+ vacancies and Ni3+ ions in non-stoichiometric NiO: breakdown of anti-ferromagnetic ordering and large exchange bias	33

Comparative evaluation of delignification strategies for the preparation of transparent wood composites	33
Electromechanical coupling behavior of carbon fiber plain-woven composites sensor for self-stress sensing and damage monitoring	33
Temperature-dependent mechanical properties of TaC and HfC	33
In situ aluminum oxide reinforced Mg-La-based composite for optimizing high-temperature wear behavior	33
Next-generation solar absorber candidate Rb2PdTe2: a study based on DFT, SCAPS-1D, and machine learning approaches	33
Unveiling the role of trace metal doping in transition metal oxides for boosting oxygen evolution reaction	33
Hierarchically porous nitrogen-doped carbon nanowires derived from polypyrrole nanowires for supercapacitors and lithium–sulfur batteries	33
Peer pressure: assessing the trustworthiness of a peer-reviewed journal article	32
Rapid anti-solvent vapor-assisted synthesis of CsPbBr3/Cs4PbBr6 microcrystals with high brightness and stability of green light emission	32
Exploring the influencing factors of the electrochemical reduction process on the PEC water splitting performance of rutile TiO2	32
Three-dimensional ordered macroporous ceria–lanthanum cobaltate composite as efficient catalyst to activate peroxymonosulfate for N,N-dimethylformamide degradation	32
Analytical modeling of NH3 gas sensing using zigzag graphene nanoscrolls: energy band structure and electrical properties	32
Hydroxyapatite/titanium dioxide/bioactive glass composites with anti-microbial performance under multiple illumination conditions	32
Er-containing microalloyed aluminum alloys: a review	32
Rapid preparation of novel hybrid MoS2@Ag@PA with core–shell structure for enhancing fire safety and other critical properties of EVA composites	32
Improving the emissive properties of yttrium-based phosphor through internal and external modifications	32
Heterogeneous nucleation of polyethylene crystals on binary hexagonal nanoplatelets	31
Additive manufacturing of wearable flexible sensors based on GN/flexible resin composite materials	31
Hydrogen peroxide LSPR sensing with unoxidised CuNPs-Tween® 60	31
The effect of fines on the consolidation of Eucalyptus/PLA fiber air-laid sheets	31
Effect of catalyst type on the type and size of nano-diamond synthesized by chlorine gas etching of Ti3C2 MXene under ambient pressure	31
Pinning growth of TiN films toward porous Ti matrix	31
Elucidating the dependence of corrosion behavior and mechanical property on the grain structure of low-temperature as-extruded Mg–Zn–Ca–Zr alloy	31
Optimization of the Pechini-derived synthesis of rare-earth free aluminum borate phosphors presenting tunable white emission	31
Influence of alkalizers–capping agents on hydrothermal synthesis, phase content, magnetization and pseudocapacitive behavior of iron oxides	30
Effect of quantum size on thermoelectric properties of black arsenic	30
Plausibility of ultrathin CdTe solar cells: probing the beneficial role of MgZnO (MZO) high resistivity transparent (HRT) layer	30
Mechanical properties and corrosion resistance of TC4 titanium alloy joints by plasma arc welding + gas tungsten arc welding combination welding	30
Diffusion bonding of steels with a homogeneous microstructure throughout the joint	30
Green and fast synthesis of layered δ-MnO2 catalysts for the catalytic oxidation of toluene by self-driven combustion technology (SCT)	30
Review on machine learning application in tissue engineering: What has been done so far? Application areas, challenges, and perspectives	30
Facile synthesis of ferric hydroxide chelated sand via dopamine chemistry for the degradation of methylene blue by heterogeneous Fenton method	30
Tooth whitening and caries prevention toothbrush based on PTFE electret	30
Molecular dynamics simulation of the mechanical and thermal properties of phagraphene nanosheets and nanotubes: a review	30
Research progresses on anti-Si/Zr-poisoning in high-performance Al alloys: a review	29
Improved hot workability of Cu-3.18wt%Ti alloy via cooperative control of dynamic recrystallization and precipitation	29
Interface modification between Ta, Al-doped Li7La3Zr2O12 solid electrolyte and LiNi1/3Co1/3Mn1/3O2 cathode in all-solid-state batteries	29
High-temperature phase transformations of hydroxylapatite and the formation of silicocarnotite in the hydroxylapatite–quartz–lime system studied in situ and in operando by Raman spectroscopy	29
Development and characterization of a new predominantly β Ti–15Mo–5In alloy for biomedical applications	29
Boundary characterization using 3D mapping of geometrically necessary dislocations in AM Ta microstructure	29
Review: high-performance dissimilar metal joining between titanium alloys and steel	29
Impact of the twin boundary on nickel-based superalloy behavior during tensile deformation using molecular dynamics	29
Unfolding the significance of metal oxides for photocatalytic sustainable water splitting combined with organic pollutants	29
Atomistic insight into three-dimensional twin embryo growth in Mg alloys	29
Solvent-free fabrication of mechanically durable superhydrophobic film with regular hollow structures for passive cooling	29
Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites	29
Improving the electrocatalytic activity of Co-based metal–organic framework towards hydrogen evolution and oxygen evolution reactions through Ru doping	29
Editorial: The July 2023 cover paper	28
Phase segregation in bimetallic nanodroplets	28
Improvement of interface stability and anti-friction performance of anodized AA6082 alloys by adjusting the state of Mg before anodization	28
On the phase evolution during reaction of molten Si0.9Zr0.1 and Si0.9Hf0.1 alloys with carbon	28
Tuning optoelectronic properties of CsPbI2Br perovskite films via octadecyl ammonium iodide substitution	28
Preparation and application of carboxylated carbon nanotube-modified melamine resin phase change materials with high photothermal conversion efficiency	28
Preparation of lightweight and energy absorption polyurethane power battery sealants	28
Fabrication of CoFe/CoMoP/NF catalyst for effective oxygen evolution reaction	28
Construction of a cytochrome c nanosensor based on nano-engineered cytochrome oxidase enzyme covalently immobilized on AuNPs-GrNs nanocomposite-modified pencil graphite electrode	28
Constructing epigallocatechin gallate/nano-ceria coating to enhance osteogenesis of titanium implants via alleviating oxidative stress	28
Effect of hot isostatic pressing on the low-cycle fatigue behavior of laser powder bed fusion manufactured 21-6-9 austenitic stainless steel	28
Cobalt–zinc nanoferrite for synergistic photocatalytic and peroxymonosulfate-assisted degradation of sulfosalicylic acid	28
Enhanced photostability of chlorophyll by introducing Mg2Si as an O2-depleting agent	28
Deep-UV sensitivity of xerogel thin films prepared from solutions of modified titanium alkoxides	28
Sol–gel synthesis of iron titanates for the photocatalytic degradation of cyanide	28
Melt-spinning and the thermal decomposition of mixed polymers containing polysilsesquioxane and polycarbosilane	28
Inhibiting effect of tensile strain on the nucleation of M6C at grain boundary	28
The work hardening model of dual-phase Mg–8Li–3Al–1Nd alloy	28
Magnetically recyclable PbMoO4/BC/Fe3O4 composite for tetracycline removal: fabrication, performance, and mechanism	28
Enhanced resistivity and temperature stability of dielectric properties of Yb3+-doped 0.97BaTiO3-0.03K0.5Na0.5NbO3-MgO-Bi4Ti3O12 ceramics	27
An intelligent superhydrophobic absorbent with electrothermal conversion performance for effective high-viscosity oil removal and oil–water separation	27
Design, synthesis and investigations of PdxSn1-x nanoparticle-impregnated NiTiO3 as highly active electrocatalyst for methanol oxidation reaction in alkaline medium	27
CALPHAD-based design and preparation of high-strength, high-conductivity Cu–Fe–Zr alloys	27
Study on thermal deformation behavior and microstructural evolution of 2 wt. % Al–Ti–C/7075Al composite materials	27
Lignin-derived porous carbon materials with enhanced oxygen reduction reaction performance for zinc air batteries	27
Effect of solutes on the formation of primary carbides during solidification of hypereutectic high chromium cast irons through thermodynamic modeling	27
On the optimisation of the composition of high-entropy alloys	27
Correction: Thin-walled aluminium waste remelting in circulation circuit with magnetodynamic pump	27
Effect of temperature on the tensile deformation behavior and fracture mechanism of a transient liquid-phase bonding joint of γ′-strengthened Co-based single-crystal superalloy	27
Hydrophobic aerogels derived from fan blades waste for efficient oil/water separation	27
Designing quenching and partitioning thermal routes of medium-Mn steel intended for ultra-high-strength plates	27
Nickel-doped silver nanoclusters as a mechanism to capture photons	27
The influence of Si content on precipitation behavior and high-temperature mechanical stability in ERNiMo-2 deposited metal	27
Phase transformations in yttria-partly stabilized zirconia induced by dental polishing regimes	27
Biowaste-based hierarchical porous carbon/sulfur composite derived from sustainable fabrication technique as cathode material for Li–S batteries	27
Structure–performance correlations in the hybrid oxide-supported copper–zinc SAPO-34 catalysts for direct synthesis of dimethyl ether from CO2	27
Superhydrophobic thermoplastic polyurethane/SiO2 sponge with dual-layer porous structure for summer radiative cooling and winter thermal insulation	27
Size distribution and solidification of Cu-rich dispersed particles in the core region of stable core shell microstructures of metastable alloy	27
Stabilization residual oxygen reduces sulfur activity in hard carbon anode for sodium-ion batteries	26
Graphene-based SERS-active substrates for environmental detection: nanoarchitectonics and applications	26
Development of sustainable ternary bionanocomposite film reinforced with nanocellulose and nanoclay for microbial efficacy	26
Mechanical response and plastic deformation in single- and dual-phase polycrystalline FeNiAl alloys: molecular dynamics analysis	26
The effect of deformation parameters on the dynamic recrystallization and microstructure evolution of the quasi-continuous network reinforced TiAl/B4C composites	26
Preparation, characterization, and experimental investigation of novel composite phase change material for thermal management applications	26
Modelling creep properties of alloys without adjustable parameters	26
Effect of stabilizer agent type on the characteristics of Pd–Ni nanoparticles deposited on reduced graphene oxide as electrocatalysts for the oxygen reduction reaction	26
Residual elastic stress and texture evolution in the surface layer of a Ti-6Al-4 V alloy induced by pulsed radially converging low-energy high-current electron beams	26
Effect of organic modification on the structure and properties of silicates synthesized by a titanium-catalyzed sol–gel method	26