Journal of the Mechanics and Physics of Solids

Article	Citations
A finite geometry, inertia assisted coarsening-to-complexity transition in homogeneous frictional systems	124
Does elastic stress modify the equilibrium corner angle?	109
Cracking in semiconductor devices–effect of plasticity under triaxial constraint	100
Characterizing dissipated energy density distribution and damage zone in double network hydrogels	96
The role of plasticity in combined torsion and bending of elastic–plastic guidewires	88
Nonlinear dynamics of a flexible rod partially sliding in a rigid sleeve under the action of gravity and configurational force	77
Dual-scale porosity effects on crack growth in additively manufactured metals: 3D ductile fracture models	75
Electromechanical buckling of periodic patterns on stiff film bonded to a compliant substrate – Analytical and numerical postbuckling analyses	72
Editorial Board	70
Multiple equilibrium states of a curved-sided hexagram: Part I—stability of states	70
Corrigendum to “The role of the roughness spectral breadth in elastic contact of rough surfaces” Journal of the Mechanics and Physics of Solids, Volume 107, pages 469-493	67
Magnetothermal dehydration induced deformation of hydrogel structures: Modelling and experiment	66
Dynamic magneto-flexoelectricity and seismo-electromagnetic phenomena: Connecting mechanical response to electromagnetic signatures	65
Editorial Board	63
Stochastic generalized standard materials and risk-averse effective behavior	58
A thermodynamically consistent gradient theory for diffusion–reaction–deformation in solids: Application to conversion-type electrodes	56
Crack tip stress intensification in strain-induced crystallized elastomer	55
Discrete dislocation dynamics for crystal RVEs. Part 1: Periodic network kinematics	54
An interpenetrating-network theory of the cytoskeletal networks in living cells	53
Unifying creep and fatigue modeling of composites: A time-homogenized micromechanical framework with viscoplasticity and cohesive damage	51
Locally translation-isometric and multi-isometric sets as generalizations of objective structures	50
Surface accretion of a pre-stretched half-space: Biot’s problem revisited	50
Elastic bound state in the continuum with perfect mode conversion	49
Size-dependent shape characteristics of 2D crystal blisters	48
A physics-based crystal plasticity model for the prediction of the dislocation densities in micropillar compression	48

Energetic exhaustiveness for the direct characterization of energy forms of hyperelastic isotropic materials	48
The Green’s function based thermoelastic analysis of spherical geothermal tanks in a semi-infinite domain	47
A constitutive model for amorphous solids considering intrinsic entangling of shear and dilatation, with application to studying shear-banding	46
Diversity of the bifurcations and deformations on films bonded to soft substrates: Robustness of the herringbone pattern and its cognate patterns	46
Atomistic mechanisms of adhesion and shear strength in graphene oxide-polymer interfaces	45
Analysis of shear localization in viscoplastic solids with pressure-sensitive structural transformations	45
Chemo-mechanical modeling of inter- and intra-granular fracture in heterogeneous cathode with polycrystalline particles for lithium-ion battery	45
Energy quantification framework for underwater explosive loading into PVC foam cladded composite plates	43
Topological mechanics beyond wave dynamics	42
An asperity-based statistical model for the adhesive friction of elastic nominally flat rough contact interfaces	42
Theory of hard magnetic soft materials to create magnetoelectricity	42
NN-EUCLID: Deep-learning hyperelasticity without stress data	41
Dynamic fracture of a bicontinuously nanostructured copolymer: A deep-learning analysis of big-data-generating experiment	41
Ultrastrong pure aluminum structure with gradient nanocrystals via selective pulsed laser melting: Computation framework and experiments	41
Response of an underwater cylindrical composite shell to a proximal implosion	41
Validating continuum theory for Cottrell atmosphere solute drag by molecular dynamics simulations	41
Perspective on the Bond Bending and Bond Stretching Effects at the Atomic Scale and Their Relationship to Ductile Versus Brittle Materials Failure	41
Theory of unconventional singularities of frictional shear cracks	41
Estimating the macro strength of rock based on the determined mechanical properties of grains and grain-to-grain interfaces	40
A multiscale model to understand the interface chemistry, contacts, and dynamics during lithium stripping	40
Force relaxation response in the poroelastic axisymmetric Boussinesq problem for an indenter of arbitrary profiles I: Permeable and impermeable surface drainage conditions	37
Analysis of mode I crack propagation in glassy polymers under cyclic loading using a molecular dynamics informed continuum model for crazing	37
Energy transmission through and reflection from a layer of random composite	37
Subsurface microstructure effects on surface resolved slip activity	37
A simple hydrodynamic model for clay	37
A foundational framework for the mesoscale modeling of dynamic elastomers and gels	36
Deformation, shape transformations, and stability of elastic rod loops within spherical confinement	36
Initializing intragranular residual stresses within statistically equivalent microstructures for crystal plasticity simulations	36
Cohesive element simulations capture size and confining stress dependence of rock fracture toughness obtained from burst experiments	36
Geometrical incompatibility guides pattern selection in growing bilayer tubes	36
Stabilization against gravity and self-tuning of an elastic variable-length rod through an oscillating sliding sleeve	36
Nanosleeves: Morphology transitions of infilled carbon nanotubes	36
Experimental assessment of the eigenstress state in two-ply yarns and its effect on tensile properties	35
Microtwist homogenization of three-dimensional Pyrochlore lattices on zero modes and mechanical polarization	35
Mechanobiological modeling of viscoelasticity in soft tissue growth and morphogenesis	35
What are the “dispersive shear bands” on the surfaces of layered heterostructured materials?	35
Tuning the stiffness and stretchability of micro-scale-structured polymer membrane simultaneously by integrating mechanical modeling and spatiotemporal controllable photolithograph	34
Measuring Terzaghi’s effective stress by decoding force transmission in fluid-saturated granular media	34
A generalized anisotropic damage interface model for finite strains	34
Phase-field simulation and coupled criterion link echelon cracks to internal length in antiplane shear	33
A Theoretical Model of Enhanced Adhesion of Bioinspired Micropillar Arrayed Surfaces	33
An investigation of Hertzian contact in soft materials using photoelastic tomography	33
Nonlinear inclusion theory with application to the growth and morphogenesis of a confined body	33
Mechanistic modelling of fatigue nucleation and short crack growth in polycrystalline alloys	32
Integrated simulation, machine learning, and experimental approach to characterizing fracture instability in indentation pillar-splitting of materials	32
A framework to simulate the crack initiation and propagation in very-high-cycle fatigue of an additively manufactured AlSi10Mg alloy	32
A ductility criterion for bcc high entropy alloys	32
A visco-hyperelastic model for hydrogels with tunable water content	32
On the experimental identification of equilibrium relations and the separation of inelastic effects in soft biological tissues	32
Bending deformable tension-shear model for nacre-like composites	32

Particle size effects in ductile composites: An FFT homogenization study	31
Editorial Board	31
Perspective: Machine learning in experimental solid mechanics	31
Corrigenda to “A phase-field model for fatigue crack growth” [J. Mech. Phys. Solids 132 (2019) 103684] and “Phase-field fracture modeling for large structures” [J. Mech. Phys. Solids 171 (2023) 105118	31
Fluctuations of active membranes with nonlinear curvature elasticity	31
Pull-off dynamics of mushroom-shaped adhesive structures	30
A continuous pleated birod for converting contractions into twisting through instability	30
A multi-scale framework to predict damage initiation at martensite/ferrite interface	30
Strength criterion of graphene GBs combining discrete bond strength and varied bond stretch	30
A thermodynamically consistent J-integral formulation for fluid-dr	30
On the theory of mechanically induced chemiluminescence in multiple network elastomers	30
A coupled electro-chemo-mechanical theory for polyelectrolyte gels with application to modeling their chemical stimuli-driven swelling response	29
A complete thermo–electro–viscoelastic characterization of dielectric elastomers, Part I: Experimental investigations	29
Interactions among phase transition, heat transfer and austenite plasticity in cyclic compression of NiTi shape memory alloys: Effect of loading frequency	29
Extended deformable tension-shear model for graphene layered materials with non-uniform staggering	29
Chain breaking in the statistical mechanical constitutive theory of polymer networks	29
Dispersion and attenuation relations in flexoelectricity	29
Modeling coupled electro-chemo-mechanical phenomena within all-solid-state battery composite cathodes	29
Rainbow trapping of out-of-plane mechanical waves in spatially variant beam lattices	29
Deciphering necking in granular materials: Micromechanical insights into sand behavior during cycles of triaxial compression and extension	29
Mechanics of transient semi-flexible networks: Soft-elasticity, stress relaxation and remodeling	29
Modeling the improved hydrogen embrittlement tolerance of twin boundaries in face-centered cubic complex concentrated alloys	28
On the cyclic elastoplastic shakedown behavior of an auxetic metamaterial: An experimental, numerical, and analytical study	28
Why does an elastomer layer confined between two rigid blocks grow numerous cavities?	28
Quantifying 3D time-resolved kinematics and kinetics during rapid granular compaction, Part I: Quasistatic and dynamic deformation regimes	28
Polyphase crystal plasticity for high strain rate: Application to twinning and retwinning in tantalum	28
Atomistic analyses of fracture in α, 28
Dynamic strain localization into a compaction band via a phase-field approach	28
Hierarchy of geometrical frustration in elastic ribbons: Shape-transitions and energy scaling obtained from a general asymptotic theory	28
The mechanical behavior of 2-D lattices with bi-stable springs	28
A data-driven approach to predicting the anisotropic mechanical behaviour of voided single crystals	28
On the effect of nuclear fission cladding stresses on Zirconium hydride orientation and dislocation strain energy fields via discrete dislocation plasticity and crystal plasticity finite element model	27
Experimental molecular dynamics for individual atomic-scale plastic events in nanoscale crystals	27
Disclination-dislocation based model for grain boundary stress field evolution due to slip transmission history and influence on subsequent dislocation transmission	27
Energy based fracture initiation criterion for strain-crystallizing rubber-like materials with pre-existing cracks	27
Torsional and translational vibrations of a eukaryotic nucleus, and the prospect of vibrational mechanotransduction and therapy	26
Fire-induced damage behaviour in corrosion-damaged concrete: Thermal-mechanical coupling phase field meso-scale modeling	26
A theoretical framework for multi-physics modeling of poro-visco-hyperelasticity-induced time-dependent fracture of blood clots	26
Substrate elasticity and surface tension mediate the spontaneous rotation of active chiral droplet on soft substrates	26
A macroscopic viscoelastic viscoplastic constitutive model for porous polymers under multiaxial loading conditions	26
Computation of effective elastic moduli of rocks using hierarchical homogenization	26
The impacts of thermoelastic anisotropy and grain boundary misorientation on microcracking in ceramics	26
Angle-dependent protrusion of cell membranes	25
Torsional deformation dominated buckling of serpentine structures to form three-dimensional architectures with ultra-low rigidity	25
A theoretical model of fracture of biological composites considering complex structural arrangement of microstructures	25
Crystal plasticity including a phase-field deformation twinning model for the high-rate deformation of cyclotetramethylene tetranitramine	25
Filled elastomers sliding over smooth obstacles: Experiments and modeling in large deformations	25
Is a high-throughput experimental dataset large enough to accurately estimate a statistic?	25
A general continuum damage model for soft composites	25
Cracking of soft collagenous tissues under suture retention	25
Mechanotropism of single cells adhering to elastic substrates subject to exogenous forces	24
Pattern selection on axial-compressed bilayer systems with a non-zero Gauss curvature	24
Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials	24
Wrinkling of differentially growing bilayers with similar film and substrate moduli	24
Spider silks mechanics: Predicting humidity and temperature effects	24
Nonlinear mechanics of phase-change-induced accretion	24
A micromechanics-based variational phase-field model for fracture in geomaterials with brittle-tensile and compressive-ductile behavior	24
The theory of continuous distributions of composite defects	24
Modeling of textile composite using analytical network-averaging and gradient damage approach	23
Numerical and experimental crack-tip cohesive zone laws with physics-informed neural networks	23
Wavelength selection in the twist buckling of pre-strained elastic ribbons	23
A variational phase-field framework for multiphysics modelling of degradation and stress corrosion cracking in biodegradable magnesium alloys	23
Blood pressure-driven rupture of blood vessels	23
A unified anisotropic phase field model for progressive failure of fiber-reinforced composite materials	22
Fracture process zone and fracture energy of heterogeneous soft materials	22
Design of composite structures with programmable elastic responses under finite deformations	22
Strain energy density maximization principle for material design and the reflection in trans-scale continuum theory	22
Physics-infused deep neural network for solution of non-associative Drucker–Prager elastoplastic constitutive model	22
Polyacrylamide hydrogels. IV. Near-perfect elasticity and rate-dependent toughness	22
Editorial Board	22
A hydrodynamic-plastic formulation for modelling sand using a minimal set of parameters	22
Closed tubular mechanical metamaterial as lightweight load-bearing structure and energy absorber	22
Elastic bodies with kinematic constraints on many small regions	22
A mechanically-derived contact model for adhesive elastic-perfectly plastic particles, Part II: Contact under high compaction—modeling a bulk elastic response	21
Phase-field simulations of ferro-electro-elasticity in model polycrystals with implications for phenomenological descriptions of bulk perovskite ceramics	21
On inherent hyperelastic crease	21
Data-driven bio-mimetic composite design: Direct prediction of stress–strain curves from structures using cGANs	21
Rate induced thermomechanical interactions in NiTi tensile tests on strips	21
Imaging the intramuscular pressure of living muscles with shear waves	21
Unraveling the molecular mechanisms of membrane rupture: Insights from all-atom simulations and theoretical modeling	21

Robust implementation of Physical Regime Sensitivity and demonstration on Richtmyer–Meshkov Instability experiments	21
Mechanistic understanding of microstructural effects on the thermal fatigue resistance of solder joints	21
A coupled approach to predict cone-cracks in spherical indentation tests with smooth or rough indenters	21
Continuum damage micromechanics description of the compressive failure mechanisms in sustainable biocomposites and experimental validation	21
The mesoscale mechanics of compacted ductile powders under shear and tensile loads	21
Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy	21
Pinning cracks by microstructure design in brittle materials	21
I too I2	20
Phase-field finite deformation fracture with an effective energy for regularized crack face contact	20
The arrest and recession dynamics of a deflating radial hydraulic fracture in a permeable elastic medium	20
A coupled model of transport-reaction-mechanics with trapping, Part II: Large strain analysis	20
Mechanics, modeling, and shape optimization of electrostatic zipper actuators	20
Stress–strain hysteresis during hydrostatic loading of porous rocks	20
Membrane stretching based creep damage analytical solutions for thin disc small punch problem	20
Mechanosensing model of fibroblast cells adhered on a substrate with varying stiffness and thickness	20
Dislocation dynamics prediction of the strength of Al–Cu alloys containing shearable <	20
A kinetic model of a polyelectrolyte gel undergoing phase separation	20
Modeling and simulation of laser shock waves in elasto-plastic polycrystalline microstructures	20
On Peierls–Rice–Beltz nonlocal continuum model and simulations of mesoscale dislocations (slips) and shear cracks	20
Metamodeling of constitutive model using Gaussian process machine learning	20
Mechanistic cohesive zone laws for fatigue cracks: Nonlinear field projection and in situ synchrotron X-ray diffraction (S-XRD) measurements	19
A phase-field model for ferroelectrics with general kinetics, Part I: Model formulation	19
Predicting protein thermal stability changes upon single and multi-point mutations via restricted attention subgraph neural network	19
Editorial Board	19
A computational study of bio-chemo-mechanics of thrombus-laden aneurysms	19
Eulerian rates of elastic incompatibilities applied to size-dependent hardening in finite torsion	19
Solutions to the generalized Eshelby conjecture for anisotropic media: Proofs of the weak version and counter-examples to the high-order and the strong versions	19
Surface pattern formation induced by oscillatory loading of frontally polymerized gels	19
Corrigendum to ‘Triplet condition: A new condition of supercompatibility between martensitic phases’ [Journal of the Mechanics and Physics of Solids 169 (2022) /105050]	19
Oxide growth and stress evolution underneath cracked environmental barrier coatings	19
Viscous solvent effect on fracture of predamaged double-network gels examined by pre-notch and post-notch crack tests	19
A theory that couples electrochemistry and thin film piezoelectricity with stability analysis for electrodeposition	19
Editorial Board	19
Phase-field modeling of coupled spall and adiabatic shear banding and simulation of complex cracks in ductile metals	19
Complementing a continuum thermodynamic approach to constitutive modeling with symbolic regression	19
Effective toughness of disordered brittle solids: A homogenization framework	19
Deformation behavior of fluid-filled porous elastomers: Analytical estimates and validation	19
ViscoNet: A lightweight FEA surrogate model for polymer nanocomposites viscoelastic response prediction	19
On the role of plastic relaxation in stress assisted grain boundary oxidation	19
Propagation of solitary waves in origami-inspired metamaterials	18
Homogenization of phase transforming materials: The concept of phase-morphology and variable scale separations	18
Topology generation and quantitative stiffness analysis for fiber networks based on disordered spatial truss	18
Crack nucleation and propagation of electromagneto-thermo-mechanical fracture in bulk superconductors during magnetization	18
Kinetic friction of structurally superlubric 2D material interfaces	18
A mechanics and electromagnetic scaling law for highly stretchable radio frequency electronics	18
A statistical mechanics framework for polymer chain scission, based on the concepts of distorted bond potential and asymptotic matching	18
The selection mechanism of mineral bridges at the interface of stacked biological materials for a strength-toughness tradeoff	18
Thermodynamics of strain-induced crystallization in filled natural rubber under uni- and biaxial loadings, Part II: Physically-based constitutive theory	18
Variational estimates for the effective properties and field statistics of composites with variable particle interaction strengths	18
Incompatibility-driven growth and size control during development	18
Grid hollow octet truss lattices that are stable at low relative density	18
Correlation between synthesis parameters and hyperelasticity of hydrogels: Experimental investigation and theoretical modeling	18
Three-dimensional fracture mechanics model of conch shells with hierarchical crossed-lamellar structures	18
A mechanism-based multisurface plasticity model for hexagonal close-packed materials with detailed validation and assessment	18
A multiscale Bayesian method to quantify uncertainties in constitutive and microstructural parameters of 3D-printed composites	18
On local kirigami mechanics I: Isometric conical solutions	18
Deep learning in frequency domain for inverse identification of nonhomogeneous material properties	18
Mechanical coupling effects of 2D lattices uncovered by decoupled micropolar elasticity tensor and symmetry operation	18
3D CP-XFEM modelling of short crack propagation interacting with twist/tilt nickel grain boundaries	17
De-localizing brittle fracture	17
Fast permeability measurement for tight reservoir cores using only initial data of the one chamber pressure pulse decay test	17
Editorial Board	17
Double-eigenvalue bifurcation and multistability in serpentine strips with tunable buckling behaviors	17
A computationally efficient implementation of continuum dislocation dynamics: Formulation and application to ultrafine-grained Mg polycrystals	17
Predicting mechanical properties of mitotic spindles with a minimal constitutive model	17
Revealing the coaction of viscous and multistability hysteresis in an adhesive, nominally flat punch: A combined numerical and experimental study	17
A constitutive model that couples light propagation direction and deformation for photo-responsive polymers and polymeric gels	17
Editorial Board	17
Towards design of a gradient locally resonant acoustic metasurface for negative reflection	17
Continuum modeling predictions of nonlinear specific heat in phase transition of energetic materials	17
Amplitude-dependent boundary modes in topological mechanical lattices	17
A hyperelastic constitutive model for soft elastomers considering the entanglement-dependent finite extensibility	17
Wrapping of a vesicle nanoparticle with variable bending stiffness by membrane	17
Mechanics of liquid crystal inclusions in soft matrices	17
Universal deformations in anisotropic nonlinear elastic solids	17
A constitutive model for fibrous tissues with cross-linked collagen fibers including dispersion — With an analysis of the Poynting effect	16
Combined influence of shallowness and geometric imperfection on the buckling of clamped spherical shells	16
Tunable phononic bandgap materials designed via topology optimization	16
Stiffening and softening in the power-law rheological behaviors of cells	16
A unified mathematical treatment of interfacial edge dislocations in three-dimensional functionally graded materials	16
Entropic pressure on a confined biological vesicle with surface tension	16
Origin of frictional scaling law in circular twist layered interfaces: Simulations and theory	16
Bending stiffness of ionically bonded mica multilayers told by its bubbles	16
Fracture tolerance induced by dynamic bonds in hydrogels	16
Physics-based discrete models for magneto-mechanical metamaterials	16
Influence of nearby fiber on fiber–matrix debonding: Coupled Criterion prediction and debonding shape determination	16
Strengthening via Orowan Looping of Misfitting Plate-like Precipitates	16
Nacre's brick–mortar structure suppresses the adverse effect of microstructural randomness	16
How to select discrete or continuous interfaces in biological materials to achieve a strength-toughness tradeoff	16
Mapping deformation and dissipation during fracture of soft viscoelastic solid	16
On local kirigami mechanics II: Stretchable creased solutions	16
Synthesis-processing-property relationships in thermomechanics of liquid crystal elastomers	16
HR-EBSD analysis of in situ stable crack growth at the micron scale	16
Delayed tensile instabilities of hydrogels	16
Surface wrinkling of a film coated to a graded substrate	16