Magazine of Concrete Research

Article	Citations
Modelling of concrete swelling effects in dams, considering the influence of temperature, humidity, stress field, viscoelasticity and cracking	35
Analysis of cement paste and aggregate content of concrete using micro X-ray fluorescence	34
Effect of geogrid reinforcement on tensile failure of high-strength self-compacted concrete	31
Mechanical properties of recycled aggregate concrete containing brick particles	31
Waste-based mortars containing glass powder, GGBS, lead smelter slag and foundry sand reinforced with graphene oxide	29
Analysis of whole loading process of concrete beams reinforced with hybrid rebars allowing for confinement effect	22
New method for determining the mode I fracture toughness of shotcrete: edge-notched partial disc test	20
Shear thickening of cementitious suspensions: effect of high-volume fraction and hydration	19
Macro and micromechanical properties of polypropylene-fibre-reinforced rubber-based flexible energy-consuming concrete	18
Pre-treated municipal solid waste bottom ash as alkali-activated mortar precursor	18
Durability properties of lightweight concrete with ceramic mould casting waste	18
A multiscale peridynamic model for simulating the corrosion-induced cracking of concrete cover	17
Effect of hydration assemblage on the autogenous shrinkage of alkali-activated slag mortars	17
Effect of hydrogel microcapsule on shrinkage and mechanical properties of cement mortars	16
Mechanical properties of mortars with waste plastic as replacement of natural aggregate	15
A laboratory test on the effect of bugholes on surface degradation of tunnel lining concrete subject to freeze–thaw cycles	14
The role of temperature in thaumasite formation under the immersion of magnesium sulfate solution	14
Rheology, setting and hydration of calcined clay blended cements in interaction with PCE-based superplasticisers	14
Influence of the mix composition on the thixotropy of 3D printable mortars	13
Basics and new opportunities for chemical re-alkalisation of carbonated concrete, including alkali-activated binders	12
Effect of loading rate on the bond behaviour of plain round bars in concrete subjected to uniaxial lateral tension	12
Theoretical analysis of bond characteristics between steel bars and ultra-high-performance concrete	12
Effects of multi-scale hybrid fibre reinforcement on the mechanical properties of ultra-high-performance concrete	11
Effects of desalinated sea sand on the alkali–silica reaction of seawater and sea sand concrete	11
Estimation of creep and damage accumulation in thin-walled concrete structures	11

Effect of attachment of barnacles and oysters on concrete properties	11
The effects of reduced paste volume in Portland limestone cement concrete	10
External sulphate attack on alkali activated slag and slag/fly ash concretes	10
Modelling of alkali–silica reaction based on time-resolved micro-computed tomography imaging	10
Seismic behaviour of RC jacketed columns under different axial loads	10
Advances and perspectives in engineered cementitious composites: a comprehensive review	9
Thermal conductivity modelling of structural lightweight aggregate concrete	9
Chloride transport in alkali-activated materials influenced by different reaction products: a review	9
Stirrup effects on the bond properties of corroded reinforced concrete	9
Punching shear tests and design of UHTCC-enhanced RC slab–column joints with shear reinforcements	9
Book review	9
Improvement of mechanical strength of mortars by different morphological zinc oxide nanoparticles	9
Research on the reaction kinetics of alkali-activated materials	9
Numerical modelling of punching shear failure of reinforced concrete flat slabs with shear reinforcement	8
Characteristics of alkali-activated composites containing blast-furnace slag aggregate and ferronickel slag powder	8
Tensile characteristics of ultra-high-performance fibre-reinforced concrete with and without longitudinal steel rebars	8
Compression and bending of alkali-activated slag cementitious materials at high temperature	8
Analysis of reaction degree and factors of alkali-activated fly ash/slag	8
A drift capacity prediction model for retrofitted reinforced concrete columns	8
Interface bonding performance between engineered cementitious composites (ECC)/hybrid fibre ECCs and masonry after high-temperature exposure	7
Noniterative formulae for torsional precracking responses and torsional strengths in prestressed concrete members	7
An inorganic thermal insulation material with good performance prepared from obsidian	7
Engineering and microstructural properties of self-compacting concrete containing coarse recycled concrete aggregate	7
Effect of foam volume on penetration parameters of foamed concrete	7
Developed heat-insulating dry mortar mixes for the finishing of aerated concrete walls	7
Crack resistance properties of carbon nanotube-modified concrete	7
Nano-modified concrete at sub-zero temperatures: experimental and statistical modelling	7
Optimising internal curing parameters for autonomous curing of normal-strength concrete	7
Diagnosis and prognosis of internal swelling reactions in Cahora Bassa dam, Mozambique – a case study	7
Study on the quantitative relationship between diffusivity and pore structure parameters of cement pastes	7
Axial compression behaviour of square steel tubes encased by and filled with high-strength recycled aggregate concrete	7
Drying shrinkage of ultra-high-performance concrete incorporating fine porous aggregate	7
Chloride penetration in concrete under wave impact action	6
Development of a weakly alkaline alkali-activated mortar: use of sodium carbonate/sodium sulfate–magnesia for activating fly ash–slag mixture	6
Effect of expansive agent on the mechanical properties of carbon-fibre-reinforced cement-based composites	6
Estimation of in situ masonry mortar compressive strength using hammer pendulum test method	6
Chloride diffusion and time to corrosion initiation of reinforced concrete structures	6
Prediction of free chloride concentration in fly ash concrete by machine learning methods	6
High volume of slag and polypropylene fibres in engineered cementitious composites: microstructure and mechanical properties	6
Bending behaviour of reinforced concrete/engineered cementitious composite beams	6
Ultimate bearing capacity of UHPC-encased CFST medium-long columns under axial compression	6
Effect of surface bugholes on chloride penetration of concrete coated with penetrants	6
Microstructure and transport properties of cement-based material enhanced by graphene oxide	6
Thermal and mechanical properties of concrete containing porcelain ceramic tile waste as fine and coarse aggregates	6
Effects of toothed edges and window openings on seismic behaviour of confined masonry walls	6
Residual strength prediction based on size effect of cracked concrete members	6
Performance testing of roof beam–column connections for precast N-system	6
Performance of steel-fibre-reinforced self-compacting concrete subjected to high temperature	6
Phase evolutions of cementitious materials with very low water/binder ratios	6
Suitability of electrochemical test methods for evaluating corrosion of steel in alkali-activated slag concrete	5

Tortuosity quantification of fly ash concrete considering interfacial transition zone	5
Multi-effect of superplasticisers main and side-chain length on cementitious systems with fly ash	5
Early age activation of slag concrete for applications in hollowcore slabs	5
Flexural behaviour of geopolymer concrete beams with hybrid natural–synthetic fibre reinforcement	5
Experimental study on compressive strength of in situ concrete tested with arc pressure method	5
Effects of coupled heat and moisture and load damage on chloride transport in concrete	5
Macroporosity-based prediction models for mechanical properties of foamed concrete	5
Experimental investigation of the seismic behaviour of eccentric RC beams with different reinforcement configurations	5
A modified applied element model for the simulation of plain concrete behaviour	5
Early strength development of mortar with addition of calcium formate and electric field curing in cold climates	5
Probabilistic prediction model for critical chloride concentration of reinforcement corrosion based on improved Gaussian process regression	5
Characterisation and standardisation of different-origin end-of-life building materials for assessment of circularity	5
Modelling chloride diffusion in concrete with carbonated surface layer	5
A study on the behaviour of concrete columns wrapped with hemp fabric	5
Bond performance of ribbed bars in concrete: effects of loading rate and lateral tension	5
Numerical modelling strategy for predicting the response of reinforced concrete walls using Timoshenko theory	5
Corrosion resistance of concrete strengthened with fibre-reinforced polymer sheets	5
Recycled concrete beams subjected to combined reinforcement corrosion and static pre-loading	5
Aggregate dissolution kinetics	4
Ultimate loads for reinforced concrete square pile caps	4
Mixing approach for 3D printable concrete: method of optimisation of superplasticiser dosage	4
Comparative analysis of chloride and acid resistance in one-part geopolymer and low carbon concrete	4
Effect of recycled aggregate treatment methods by pristine graphene on mechanical and durability properties of concrete	4
Development of low-carbon masonry grout mixtures using alkali-activated binder	4
Thermal and mechanical properties of a sustainable bio-flax fibre-based lightweight aggregate concrete	4
Local bond strength prediction of deformed reinforcing bars in concrete considering heterogeneity at interface regions	4
Predicting optimal dispersant (superplasticiser) content for cement–limestone pastes from rheological tests	4
Effect of moisture content on tunnel fire resistance of self-compacting concrete coated with aerogel mortar	4
Investigation of erosive wear effect on concrete water structures: the case of Porsuk Dam, Turkey	4
Structural assessment of beam–slab reinforced concrete sub-structures under column loss scenario	4
Prediction of the heat of hydration of fly ash concrete by adiabatic temperature rise test and regression analysis	4
Chloride ingress into concrete under different conditions of temperature and marine zones	4
Modelling for determining the thermal conductivity of porous solid materials	4
Effect of silica fume type, mixing sequence, and curing regime on workability and compressive strength of UHPC	4
Production of evaporation suppression floating covers using ultra-lightweight alkali-activated slag concrete	4
Effect of steel–PET fibre reinforcement on the fire resistance of reactive powder concrete	4
Proposal for characterisation of direct shear strength of steel-fibre-reinforced concrete	4
Performance of geopolymer paste under different concentrations of sodium hydroxide solution	4
Damage constitutive model of polypropylene-fibre-reinforced recycled aggregate concrete	4
Effects of calcium formate on early-age strength and microstructure of high-volume fly ash cement systems	4
Using a geochemical model for predicting chloride ingress into saturated concrete	4
Evaluation of mechanical properties and environmental impact of using limestone powder in high-performance concrete	4
Enhancing strength of cement using aluminium sulfate accelerator with aluminium formate	4
Bond behaviour of deformed reinforcing bars in ultrahigh-performance fibre RC	4
Effects of mix proportion and curing condition on mechanical properties of polyvinyl alcohol fibre ECC	4
Abrasion resistance of milling steel fibre-reinforced ultrahigh-performance concrete	4
Increasing service life of concrete in sewage treatment plants using silica fume and natural zeolite	4
GGBS Use in Concrete as Cement Constituent: Strength Development and Sustainability Effects – Part 1	3
Enhancing the residual performance of concrete using calcium aluminate cement composites	3
Impact of sodium silicate solution chemistry on product formation and jelly hardening of alkali-activated GGBS mortars	3
Prediction of fire spalling behaviour of fibre-reinforced concrete	3
Monitoring and estimate of concrete compressive strength in full curing period using smart piezoelectric modules	3
Bacteria-based self-healing of cement mortars loaded at different levels and exposed to high temperature	3
Dehydrated cement paste improves compressive strength of alkali-activated coal gangue	3
Numerical modelling of the thermo-mechanical behaviour of refractory concrete lining	3
Application of electrical fields to reduce chloride ingress into concrete structures	3
Punching Shear Capacity of Lightweight Aggregate Concrete Flat Slabs without Shear Reinforcements	3
Fracture characteristics analysis of FRP-reinforced concrete based on acoustic emission	3
Analytical and numerical approaches to model cover cracking of RC structures due to corrosion	3
Microbial repair materials based on sodium alginate modification for mortar crack repair	3
Effects of types and surface areas of activated materials on compressive strength of GGBS cement	3
Influence of high temperatures on modes I and II fracture toughness and energy of nanoclay-reinforced polymer concrete	3
Meso-damage behaviour of cement-stabilised macadam after long-time immersion based on particle flow theory	3
Fire resistance of restrained circular concrete-filled double-skin steel tubular columns	3
Shear enhancement in reinforced concrete cantilevers with multiple point loads	3
Enhancing the self-healing properties of engineered cementitious composites by the application of super-sulfated cement	3
Biological growth properties of marine Enteromorpha–diatoms and its adhesion evolution on mortar surfaces	3
Time-dependent flexural performance and design procedures for steel-bars truss slabs	3
Size effect on the dynamic tensile characteristics of concrete subjected to a high loading rate	3
Erratum	3
Retraction notice	3
Local bond strength prediction of deformed reinforcing bars in concrete by considering heterogeneity at interface regions	3
Safety factor for the Eurocode 2 punching resistance model	3
Mechanical properties of steel fibre–UHPC interface: Experimental study and numerical simulation	3
Moment redistribution capacity in prestressed concrete continuous beams	3
A review of fracture propagation in concrete: fundamentals, experimental techniques, modelling and applications	3
Assessment of sulfate resistance in fresh-to-fresh hybrid systems: a comparative study	3
Retraction notice	3
Investigation of the absorption of water from cement paste by porous aggregates using electrical resistivity measurement	3
Impact of SCMs and fibres in ECC on the fire resistance of hot-jointed SCC/ECC composites	3

Self-healing performance of nanosilica-doped concrete based on microbial mineralisation	3
Chloride penetration in reinforced slag-based concrete beams under combined effects of loads and drying–wetting cycles	3
Effect of single and hybrid incorporation of steel, polypropylene and polyethylene terephthalate fibres on the properties of concrete under static and impact loading	3
Yield-line-based design of fibre-reinforced concrete: assessment of suitability of material models	3
Honesty and integrity in published science and engineering papers – opinion	3
Early strength and durability of tannery sludge/metakaolin based geopolymer as concrete pavement repair material	3
Durability properties of slag–waste glass binary geopolymer	2
Effect of compaction methods and mix design on the petrographic void ratio of roller-compacted concrete	2
Reliability of the damage rating index to assess the condition of concrete affected by external sulfate attack	2
The fracture energy of concrete reinforced with double-helix macro basalt-fibre-reinforced polymer fibre	2
Shear behaviour of beams produced with ultra-high-performance concrete	2
Mesoscale modelling of CRTS II slab tracks subjected to thermal action and vehicle loads	2
Post-fire properties of lightweight 3D printed concrete containing expanded perlite	2
Numerical study and seismic design of corroded circular RC columns strengthened by C-FRCM	2
Flexural tests on composite basement walls with socket-type shear connectors	2
Strength, durability and microstructural properties of geopolymer pervious concrete containing recycled concrete aggregates	2
Evaluating the impact of fly ash as a sand substitute on concrete performance	2
Hydration kinetics of sulfoaluminate cement with different water/cement ratios as grouting material used for coal mines	2
Study of the waterproof performance and freeze–thaw resistance of cement mortar using stearic-acid-modified mica powder	2
A post-punching shear model for column–slab connections for progressive collapse analyses	2
Estimation models for creep and shrinkage of concrete made with natural, recycled and secondary aggregates	2
Experimental and numerical analysis of RC beams strengthened with ECC and stainless steel strips	2
Carbonation curing of alkaline industrial waste for binders: comparison of different wastes	2
Pull-out behaviour of steel fibres in cracked concrete under wet–dry cycles – deterioration phenomena	2
Environmental impacts on expansion of concrete due to alkali–silica reaction	2
From risk study to field evidence: an unprecedented and isolated case of delayed ettringite formation in Brazil	2
Evaluation of self-consolidating concrete shear strength by means of push-off test	2
Hybridisation effect of steel–polypropylene fibres in high-volume fly ash concrete	2
Effects of mixture design parameters on the properties of belitic calcium sulfoaluminate concrete	2
Effect of electric arc furnace slag and magnetite materials on EMI shielding properties of cementitious composites	2
Impacts of anisotropy and exposure conditions on ASR-induced deterioration in columns from the Robert-Bourassa/Charest overpass after nearly 50 years of service	2
Dilatancy reversal in superplasticised cementitious mortar	2
Effect of sand gradations on the fresh properties of 3D printable concrete	2
Sustainable strain-hardening magnesium silicate hydrate composite	2
Impacts of interfacial bonding between concrete substrate and cast/sprayed HPFRCC on flexural behaviour	2
Effects of silane treatment on the bond between steel fibres and mortar	2
The combined effect of steel fibres and high-range carbon nanotubes on properties of high-strength concrete	2
Numerical simulation of fresh concrete flow in the L-box test using computational fluid dynamics	2
Correlation between the automated slump test and the rheological properties of Portland cement mortars	2
Experimental study of the flexural behaviour of ultra-high-performance concrete beam with wet joint	2
Use of the EN 12390-10 outside protected test as a tool for determining carbonation resistance	2
Numerical simulation of punching shear in RC slabs subjected to elevated temperatures	2
Study on dynamic multiaxial tension–compression properties of different types of concrete	2
Corrosion evaluation of steel bars in steam-cured concrete under chloride attack and alkali–silica reaction	2
The influence of biochar shape on cement-based materials	2
Hollowcore slab with alternative cementitious materials for winter conditions	2
Effect of a novel shrinkage-reducing polycarboxylate superplasticiser on plastic shrinkage cracking of mortars	2
Fracture properties of self-compacting mortar in terms of contents and high temperatures	2
Influence of moisture on the development of delayed ettringite formation	2
Tensile properties and constitutive model of engineered cementitious composites made with waste basalt powder and basalt sand	2
Mechanical processing of wet stored fly ash for use as a cement component in concrete	2
Failure probability analysis of corroded RC structures considering the effect of spatial variability	2
Shear contribution of beams of different sizes strengthened in shear with anchored CFRP strips	2
Influence of aggregate content and strain rate on dynamic behaviour and energy consumption characteristics of concrete	2
Time-depth dependent chloride diffusion coefficients of self-compacting concrete	2
Time-dependent similarity and micro-mechanism of chloride diffusivity of fly ash concrete in different environments	2
Application of electro-injection method in improving cement mortar durability	2
Effect of slag on strength, microstructure and rebar corrosion of chloride-rich geopolymer concrete	2
Simulation of punching and post-punching shear behaviours of RC slab–column connections	2
Methodology for numerical analysis of structures affected by delayed ettringite formation	2
Effects of wild-type and standard-strain bacteria immobilized in expanded perlite on the properties of self-healing concrete	2
Modelling the strength of cashew nutshell ash-cement-based concrete	2
Effects of parameters on vertical porosity distribution in pervious concrete	2
Effect of external sulfate attack on the tensile properties of steel-fibre-reinforced sprayed concrete	2