Materiale Plastice

Article	Citations
Experimental Investigation of Pterocarpus Marsupium Resin/LY 556 Epoxy Blended Hybrid Polymer Material	54
TiO2 Blended Membranes Used in Wastewater Nanofiltration Systems from Medical Sector	9
MRI Surveillance of Plastic Material Surgical Meshes: Experimental Model - Interim Results	9
The Influence of Temperature on Rheological Properties of Three Root Canal Sealers	8
Internal Pressure Test on HDPE Pipe Ring	7
Comparative Examination of Friction Between Additive Manufactured Plastics and Steel Surface	6
About Some Mechanical Properties Regarding Sandwich Samples Reinforced with Poplar Strips and the Core from Crushed Corn Cobs with Hybrid Dammar-Based Matrix	6
Mechanical Tests Performed on Rubber Plates Used on Railway Vehicles	6
Comparative Investigation on Polymer Drug-coating Balloons Used in Infrapopliteal Angioplasty Based on Angiosomes Concept	5
Flexural Modulus Enhancement and Minimization of Printing Time and Part Weight for PET-G, Using Taguchi-GRA-TOPSIS Techniques	5
CONTENTS 1/2024	5
Evaluation of Thermal and Thermo-mechanic Properties of Composites Based on Styrene-butadiene Copolymer (SBS)-seed Shell Particles	5
The Effect of Disinfection Methods on C. Albicans in Three Types of Denture Base Materials	5
Philosophy of Selecting ASTM Standards for Mechanical Characterization of Polymers and Polymer Composites	4
Composite Material Testing for UAV Development	4
	4
Research on Obtaining Biocomposite Structures with Sound Absorbing Properties	4
High-density Polyethylene - Expanded Perlite Composites: Structural Oriented Analysis of Mechanical and Thermomechanical Properties	4
Extraction and Identification of Natural Rubber from the Latex Obtained from Ficus Carica. Latex Characterization	4
A Multifunctional Composites Membrane Aiming at Flexible Sensor and Ultrabroadband Electromagnetic Wave Absorption	4
Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder	3
The Application of N, N -bis(Isonicotinic Acid) 1, 4-Naphthalenedicarboxylic Acid Dihydrazide in Biodegradable Poly(L-lactide): Crystalline Nucleation, Melting Behavior, Thermal Stability and Mechanic	3
Dielectric Behaviour of PVP 360 and PVA for Thin Flexible Transistors Application	3
Tensile Strength of Threaded Rods Made by 3D Printing of Polymeric Material	3
Design of Melamine Foam/perforated Plates Composite Absorber for Effective Sound Absorption Performance	3

Performance of Concrete with Recycled Epoxy Plate Waste as aPartial Replacement for Fine Aggregates	3
Research on the Lifting Forces of Industrial Plastic Vacuum Cups	3
Effect of Optimised Infill Parameters on the Tensile Properties of MEX Co-polyester Models	3
	3
Study of Concrete Properties of Recycled Glass Fibres from Decommissioned Wind Turbine Blades	3
	3
Influence of Thermal Processing for 3D Printed Components	3
Tensile Strength Prediction of Fiberglass Polymer Composites Using Artificial Neural Network Model	3
PEEK-Polymer for Dental Implants: A Concise Review	3
In vitro Comparison of the Efficiency of Celluloid and Metallic Matrices in Proximal Restorations with a Bulk Polymer-based Biomaterial	2
Green P(AAm-co-DADMAC) Copolymeric Material as Catalyst for Synthesis of Potential Phytohormones of Phenylazophenoxy-acetic Acids by Phase Transfer	2
Enhanced Electric Photoconductivity of Modified Epoxy Resin	2
The Aging Behavior of Polyurethane-based Ureteral Catheters	2
Custom Humeral Joint Prostheses Using Additive Manufacturing and Biocompatible Smart Materials	2
Metal-containing Ionic Liquids as Catalyst in PET Glycolysis	2
Mechanical Properties, DMA and Structural Analysis of Cassia Auriculata/PLA Blended Hybrid bio Matrix Composite	2
The Study of the Glass Fiber Surface Treatment Effect on the Base Strength Characteristics of the Composite Material	2
Assessment of Fracture Resistance of PEEK and Fibre Posts of the Endodontically Treated Teeth	2
Characterization of Some Functional Polymeric Composites in a Synergistic Regime of Protection at Electromagnetic Shielding and Electrostatic Transfer	2
Experimental Study on Mechanical Properties of Polyurethane Cement Composite (PUC) Under Various Temperatures	2
The Influence of 3D Printing Parameters on the Mechanical Behavior of PLA	2
Mechanical Properties of PMMA and PLA Modified Epoxy Resins	2
Green Synthesis of Clean Edge Graphene Nanosheets Using Natural Precursor	2
Formulation and Characterization of PLGA-quercetin Hybrid Material with Pharmaceutical Applications	2
The Mechanical Properties Improvement of Polyurethane Rubbers by Using Titanium Oxide and Calcium Carbonate Modifiers (Additives)	2
Influence of Biphasic Calcium Phosphate Incorporation Into Alginate Matrices	2
Starch, Glycerol and Acetic Acid-Based Films: Investigating the Impact of Starch and Acetic Acid Contents on Film Properties	2
The Study of Mechanical Properties of Sandwich Composites with a Hybrid Resin Matrix Based on Dammar, a Core of Chopped Corn Cobs and Natural Fabric Faces. Applications in the Furniture Industry	2
Influence of Hot-Air Jet (HAJ) Additional Heat Source on the Deposited Polymer in FFF Printing	2
Crack Propagation for Glass Fiber Reinforced Laminates Containing Flame Retardant: Based on Single-Edge Tensile Loading	2
Composite Materials with the Hybrid Matrix Based on Rosin and the Reinforcement from Agricultural Waste - Chemical Structure and Mechanical Properties	1
Characterisation of Fibre Reinforced Resin Concrete	1
Study of Customized Plastic High Heels Footwear	1
Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin	1
Organic Coatings with Low IR Emission	1
Analysis on the Impact of Industrial Agents on 3D-printed Polymeric Materials in Soft Robotics	1
The Influence of the Delamination Location on the Bending Behavior of E-Glass Fiber EWR Flat Plates	1
Some Insights on Chemical Treatment of 3D Printed Parts	1
Preliminary Hybrid Joint Analysis for Aircraft Structures	1
CONTENTS 2 / 2022	1
CONTENTS 1 / 2023	1
HA/HDPE Reinforced with MWCNTs for Bone Reconstruction and Replacement Application	1
Physico-chemical Characterization of Paint Films with Electromagnetic Properties	1
Study on Bonded Performance of High-Strength SteelWire Mesh with Polyurethane Cement: Analysis of Influencing Parameters	1
The Financial Impact and Techno-economic Assessment of Bioplastics Based on Their Properties	1
CONTENTS 4/2024	1
Starch Modified Tough Biocompatible Polyurethane/acrylamide bio Composites: Physicochemical Properties and Biodegradation Studies	1
Influential Parameters and Multi Objective Optimization of Bagasse and Palm Kernel Natural Fibre Plates Using Taguchi Assisted Topsis	1
Composites Based on Sustainable Biomass Fiber for Automotive Brake Pads	1
CONTENTS 2 / 2023	1

Biomaterials Used in the Prosthetics of Facial Fractures	1
	1
Synthesis and Experimental Investigation of Glass Fibre Epoxy/sawdust Composites for Flexural and Tensile Strength	1
Characterisation of Microplastics from the Effluent of a Municipal Wastewater Treatment Plant and from its Natural Receptor	1
Mechanics and Durability of Polyurethane Cement Composite (PUC) Material	1
Effect of Zeolite Mineral on the Formulation of a Wood-plastic Composite	1
The Use of Products of Microwave Aminolytic Destruction of Polyethylene Terephthalate in Vibration-absorbing Polymer Composite Materials	1
An Optimization Study on Material Selection for FRPCs in Multi Layered Armour System Through Hybrid MCDM Approach and Numerical Simulation	1
Study on the Use of Digital Technology in the Realization of Prosthetic Restorations	1
Mechanical and Thermal Properties of Aged Helmet Outer Shells Made of Acrylonitrile-Butadiene-Styrene	1
Quasi Static and Dynamic Mechanical Analysis of 3D Printed ABS and Carbon Fiber Reinforced ABS Composites	1
Influence of Processing Techniques on Microhardness and Impact Strength of Conventional and Reinforced Heat Cured Acrylic Resin: A Comparative Study	1
Surface-modified Polyurethane Structures Used as a Carrier for Simvastatin for the Possible Treatment of Atherosclerosis in Patients with Hepatic Arterial Variations	1
	1
Formulation and Characterisation of Pullulan Acetate Nanoparticles Loaded with 5-Fluorouracil	1
Obtaining and Preliminary Characterization of Some Polyethylene Composites with Nickel-Silver Ferrite Filler	1
The Influence of Polyamide Fabric on the Healing Process of Burned Patients	1
Influence of Sliding Speed and Glass Bead Concentration on 3D Roughness Parameters	1
Research on Obtaining Nanostructured Surfaces Efficient in Combating Microbial Biofilm	1
Acoustic Properties of a New Composite Material Obtained from Feather Flour and Recycled Polypropylene	0
The Importance of Appropriate PAP Silicone Mask Selection in Sleep Apnea Management	0
Mechanical, Thermal Conductivity and Water Absorption of Hybrid Nano-Silica Coir Fiber Mat Reinforced Epoxy Resin Composites	0
Studies on the Development of New Sustainable Materials Based on Recycled Low-density Polyethylene	0
Effect of Process Parameters on the Hardness of 3D-printed Thermoplastic Polyurethane that Includes Foaming Agent	0
Synthesis and Preliminary Characterization of Polyurethane Matrices Used as a Drug Carrier for Bromelain	0
Elasto-Plastic Materials based on EPDM Rubber, LDPE, Plasticized Starch and OMMT	0
Prediction of Optimal Parameter Settings and Significant Parameter for Reduced Geometric Deviations Through Multi Criteria Decision Making and Machine Learning Algorithms	0
Plastic Ventilation Tubes and Their Impact on Middle Ear Pathology	0
Effect of Phenolic Resin on the Friction Performance of Composites with Hemp Fiber for Automotive Brake Pads	0
CONTENTS 2 / 2024	0
Study on Compressive Properties of Recycling PETs and CANs for Designing a Smart Waste Management Compactor	0
Mechanical and Tribological Performance of Self-Cured Poly Methyl Methacrylate Reinforced by Alumina Nanowires and Zirconia Nanoparticles for Denture Applications	0
Investigation of the Effects of Thermal Cycling and Surface Treatments on Interim Resin Materials Produced with Additive Manufacturing	0
CONTENTS 3 / 2023	0
The Performance Investigation of PLLA/PPAPH: The Influence of PPAPH as Heterogeneous Crystal Nuclei	0
Comparison of the Effects of Sugar-free Solutions, Cola, Mouthwash on the Surface Hardness and Roughness of Temporary Crown Materials	0
	0
Physico-chemical and Biosafety Evaluations of a Polyurethane Carrier Used for Bevacizumab	0
Surface Durability Study of 3D Printed Gears Using Two Different Materials	0
The Effect of Different Fibre Lengths on the Mechanical Properties of Biocomposites	0
Acoustic and Mechanical Properties of Polystyrene Composite Filled with Primary Sludge and Boiler Ash from Pulp Mill	0
Finite Element Modeling of the Thermomechanical Behavior of Polyethylene	0
The Importance and Necessity of New Bio-Based Materials in Industrial Design	0
Material Consuption Reduction and the Influence on the Mechanical Properties of the 3D Printed Parts for ABS Silver	0
Medical Waste Water Treatment by Membrane Filtration	0
Redesign of Layout Runner in Rubber Injection Molding for Filling of a Multi-cavity Mold	0
Late Failure of a Polyethylene Unicompartmental Knee Insert -Retrieval Analysis Protocol and Results	0
Physical and Mechanical Properties Analysis of Wood-waste Composite Panels	0
Microwave Pyrolysis of Automotive Polypropylene Based on a Microwave Atmosphere Tube Furnace	0
Experimental Analysis of Hyperelastic Materials Using the Vibration Method	0
Determination of Stress Concentration Effects Using Micro-Digital Image Correlation Techniques in PMMA Specimens	0
The Static Behavior of a Ship Deck Panel Made of Composite Materials	0
In vitro Study on Water Absorption of Dental Restorative Materials	0
Impact Behavior Analysis of 3-D Printed Honeycomb Structures	0
The Vibrational Behavior of Hybrid Matrix Composites Based on Rosin and Reinforcement from Agricultural Waste and Natural Fiber Fabric	0
Study of Myopia Correction Using Nanoporous Polymer Gas Permeable Contact Lenses	0
The Influence of Hybrid Matrices Based on Dammar on the Mechanical Properties of Composites with Chopped Corn Cobs Reinforcement	0
Study of the Vibrations of Some Composite Bars with Polypropylene Honeycomb Core and Carbon Fiber and Fiberglass Fabric Faces	0
	0
Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging	0
Evaluation of Two Types Bone Substitutes in Preprosthetic Periodontal Therapy	0
Preparation and Application of Radiation-crosslinked Polypropylene by One-step Process for Corrosion Prevention of High-temperature Pipelines	0
Characterization of Blend PA6 +EPDM (60/40) by Tensile Tests	0
Effect of Recycled Ceramic Waste Content on the Properties of Unsaturated Polyester Resin	0
Optimization of Plastic Speed Meter Housing for Automobiles: Injection Molding Simulation, Taguchi Method and Machine Learning	0
Applications of 3D Printed Biomaterials in Reconstructive Surgery of the Anterior SkullB	0
Study of Customized Plastic High Heels Footwear	0
Deodorizing Methods for Recycled High-density Polyethylene Plastic Wastes	0
Experimental Investigation and Numerical Simulation on the Thermal Insulation Materials Using Recycled Thermoplastic Polymers	0
Exploring the Environmental Implications and Mechanical Optimization of Kevlar/Waste-Based Piassava Fiber Nano-SiO2 Hybrid Composites: Toward Sustainable Material Solutions	0
Experimental Studies for the Creation of Composite Materials with Increased Static Mechanical Characteristics	0
Optimal Deformation of a Small Plastic Light-guide Using Machine Learning Algorithms	0
Track Model with Nonlinear Elastic Characteristic of the Rubber Rail Pad	0
Study of the Cement Additives Effect on the Physical and Mechanical Characteristics of Rubber Material	0
Analysis of Some Mechanical Properties of Hybrid Matrix Composites Reinforced by Linen Fabric. Orthopaedic Applications	0
Experimental and Numerical Analysis of the Stress State Produced by a Circular Hole Concentrator	0
Use of Panels Made from Plastic Waste in Thermal Insulation	0
Shrinkage and Warpage in the Permanent Shape of Sape-Memory Polyurethane Parts	0
Mechanical Properties of Polymer-Infiltrated Fluorapatite Glass Ceramics Fabricated from Clam Shell and Soda Lime Silicate Glass	0
Influence of Shell Structure on the Tensile Strength of Fused Filament Fabrication Models	0

Study About Some Mechanical Properties for Composites Reinforced with Corn Cob Powder	0
Influence of Injection Moulding Parameters on Electrical Conductivity of Polypropylene-Graphite Composite Bipolar Plates for Hydrogen Fuel Cells	0
Study Effect Alpha Irradiation with Annealing on Chemical - Optical Properties of Poly (methyl methacrylate) Films	0
Emergence of High Gloss Polymer Compounds to Replace Paintable Compound	0
Antibacterial Activity of Polyvinylidene Fluoride/polyethylene Oxide Nanofibers Loaded with Azithromycin for Wound Dressing	0
Poly (L-lactic acid) Modified by N, N -bis(Stearic acid)-1,4-Dicarboxybenzene Dihydrazide: Studies of Crystallization, Melting Behavior and Thermal Decomposition	0
	0
Optimization of Injection Molding of Automotive Plastic Horn Cover Part Using Taguchi Method and Reverse Engineering	0
Mechanical Properties and Thermal Conductivity of Insulation Boards Prepared from Recycled Glass Fibers and Recycled Thermosetting Polyurethane	0
Piezoelectric thin Film Composites with BaTiO3 for Microelectronics	0
Assessment of Multilayered Plates with Hyperelastic Coatings Subjected to Dynamic Loadings by Impact at Low Velocities	0
Study on the Wear Behaviour of Aluminium foam Reinforced Glass Fibre Epoxy Composites	0
	0
	0
Study of Composite Bar Damping from Dammar Hybrid Resin Reinforced with Natural Fibers	0
Mechanical Properties and Failure Behavior of Epoxy Rubber Powder Composites Reinforced with Hollow Beads	0
Effect of Certain Hydrocarbon Compounds on High-density Polyethylene Water Pipes	0
Experimental Study Regarding the Mechanical Behavior of PPR Pipes	0
Preparation and Properties Study of PVA/Bamboo Cellulose Composite Membrane	0
Polytetrafluorethylene Prosthesis Interposition in Vascular Access	0
	0
Textile Museum Collections. SIM Method Validation for the Assessment of Pesticides	0
CONTENTS 4 2021	0
ROS-Responsive Hydrogel for Localized Neurotrophic Delivery and Oxidative Stress Modulation in Alzheimer’s Disease	0
Mechanical and Tribological Behaviour of Hybrid Multi Fibre Reinforced Nylon 6-6 Nanocomposites	0
Evaluation of the Flexural Performance of the Mono and Hybrid FRP Strengthened RC Beams: Static and Cyclic Loads	0
Evaluating the Effect of Different Mouthrinses on Properties of the Enamel and Dental Composite Surfaces	0
The Effects of Fresh Detox Juices on Color Stability of Resin Adhesive Systems	0
Study Regarding the Influence of the Printing Orientation Angle on the Mechanical Behavior of Parts Manufactured by Material Jetting	0
Overview on the Key Figures with Impact on the Circular Economy Through the Life Cycle of Plastics	0
The Influence of the Wood Essence of Beams Reinforced with Polymer Composite Materials on the Mechanical Properties	0
Synthesis and Characterization of Novel Nano Six-arms of (polylactide-dipentaerythritol)-block-N-hydroxyethyl Acrylamide and N,N-dimethylamino Ethyl Methacrylate Biocopolymers by Atom Transfer Radical	0
Asbestos-Free Brake Lining Material Using Sea Shell	0
	0
Theoretical Prediction of Two-Peak Behavior of GFRP-Reinforced Concrete Compressive Members	0
Impact of Polypropylene Sutures Phisical Properties on Lymphaticovenous Anastomosis in Lymphedema Patients	0
Experimental and Numerical Evaluation of the Stress-strain Characteristic for Synthetic Rubber Spheres	0
Determination of an Extrusion Machine Performance Based on the Working Field of the Extruder Die	0
Analysis and Optimization of UAV Frame Design for Manufacturing from Thermoplastic Materials on FDM 3D Printer	0
Nucleating Agents to Enhance Poly(L-lactide) Crystallization and Melting Behavior of Modified Poly(L-lactide)	0
In vitro Study on Mechanical Properties of Polyacid-modified Composite Resins (Compomers)	0
Mechanical Properties of Ultra-high Molecular Weight Polyethylene (tensylon�) from Tensile Tests	0
Study of Mechanical Properties of Recycled Polyethylene of High and Low Density	0
Antitumor Effect and Pharmacological Mechanism of Paclitaxel-loaded Silk Fibroin Nanomaterials on H22 Subcutaneous Tumor Model of Mouse Hepatoma	0
A Study of Fracture Resistance on Strengthening of Endodontically Treated Premolar Teeth Restored with Different Posts Cemented with Composite Material: An in vitro Study	0
Performance Study of Environmentally Friendly Construction Gypsum Prepared from Recycled Phosphogypsum and Waste Glass Fibers	0
Effect of Corrected Extrusion Flow Rate on Wall Thickness Error of MEAM Thin-walled Model	0
Study on Mechanical Properties and Fracture Mechanisms of Lignin Fiber/epoxy Resin Composites	0
The Effect of Mold Conditions on Heat Resistance of Injection-Molded Stereocomplex Polylactide-b-polyethylene Glycol-b-Polylactide Bioplastic	0
In-plane Shear Response of a Flax Fiber-epoxy Resin Composite Subjected to Repeated Loading and Creep-recovery Cycles	0
Synthesis and Characterization of Some Complexes of Azo-Chalcone Ligand and Assessment of their Biological Activity	0
Recycling of Carbon Fiber Laminates by Thermo-mechanical Disassembly and Hybrid Panel Compression Molding	0
Development and Evaluation of Polymer Drug Delivery System (PDDS) for Delivery of Boswellia seratta	0
The Tribology of Composite Materials Used for Manufacturing Brake Shoes	0
Tensile Properties of 3D-printed Continuous-Fiber-Reinforced Plastics	0
Chemical and Mechanical Properties for Rosin-based Hybrid Resins	0
CONTENTS Nr. 3 / 2022	0
Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites	0
	0
An Analysis of Water Sorption of Some Composites Used in Dentistry	0
Impact of Aligned Carbon Nanotubes on the Mechanical Properties and Sensing Performance of EVA/CNTs Composites	0
Evaluation of Surface Roughness and Optical Property in Resin-Based CAD/CAM Materials during Thermal Aging	0
Clinical Use of Nanoparticles in Orthodontics as Possible Aid to Reduce the Incidence of White Spot Lesions	0
Multi-disciplinary Optimizations on Flexural Behavioural Effects on Various Advanced Aerospace Materials: A validated investigation	0
The Development of New Nanoplatforms Based on Albumin and Graphene Oxide for Aticancer Therapy	0
Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study	0
CONTENTS 3 / 2024	0
Studies on Fluorocarbon Elastomer Nanocomposites for Sealing Applications	0
Energy Absorption Enhancement by Unit Cell Angle Grading or Sandwich Panels with Auxetic Core	0
CONTENTS 1 / 2022	0
CONTENTS 4 / 2023	0
Developing an Intelligent Material Classification System for Plastic and Other Materials	0
Influence of Electrodeposition Parameters on Morphology and Polymer Inclusion into Polymer/Zn Composite Coatings	0
Dynamic Mechanical Analysis of Aegle Marmelos / Epoxy matrix Reinforced with Snake Grass Fibre Composite	0
The Study of Some Mechanical Properties of Some Composite Materials with Different Types of Matrices and Reinforcement from Chromat-type Isophthalic Resin Granules NPG	0
Tensile Properties and Manufacturing Defectives of Short Carbon Fiber Specimens Made with the FDM Process	0
Removal of Aromatic Amino-derivatives from Aqueous Solutions Using Polymeric Supports Functionalized with Aminophosphonated/aminoacid-phosphonated Groups	0
Photochemical Properties of Propargylamine-based Polymers	0
High-voltage Electrostatic Separation and Equivalent Reuse of Plastics Used in Passenger Vehicle	0
Effect of Abrasive Water Jet Parameters on the Drilling of Aluminum Foam Sandwiched with Glass Fiber Polymer Composites	0
Damage Analysis of Composite Sheet Under Thermal Load	0
CONTENTS MATER. PLAST 3 / 2021	0
Clinical Behavior of Dental Restorations Made with Compomers, Comparing with Composite and Glass Ionomers	0
Effect of Phenolic Resin Coating Thickness on Mechanical Properties and Corrosion Resistance of Metal Materials	0
Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite	0
Preparation and Characterization of Chitosan and k-Carrageenan-Based Nanocomposite Coatings Utilizing Different Technologies for Food Packaging Applications	0
Comparative Studies on the Behaviour of Flat Panels Made of GRP Under Static and Dynamic Loads	0
Experimental Investigation on Mechanical Properties of A/GFRP, B/GFRP and AB/GFRP Polymer Composites	0
Effect of Potassium Alum Salt Particles on the Activation Energy of Poly(ethylene oxide) Doped with Conductive Carbon Black (CB) Nanoparticles	0
PLGA - gallic Acid Advanced Drug Delivery System as New Functional Material	0
Study on Mechanical Properties and Constitutive Models of Epoxy Resin under Low Strain Rate Tension and Compression	0
Numerical analysis of Plastic Perforated Panel for Acoustic Protection	0
Application of the Six Sigma Method to Improve Vulcanization Times in Automotive Tires	0
Virtual Preparations Versus Classic Preparations on Resin Models in Prosthodontics	0
Mechanical Character Analysis of Pineapple Fibre Epoxy Composite with Nanoclay Quantity Variation	0