Meccanica

Article	Citations
Static bending of granular beam: exact discrete and nonlocal solutions	49
Nonlinear transport coefficients from Grad’s 13–moment approximation	43
Application of dynamic condensation for model order reduction in real-time hybrid simulations	33
Connecting beams and continua: variational basis and mathematical analysis	32
On the stability of elastic structures subjected to follower forces	31
Correction to: Optimized Gauss–Legendre–Hermite 2-point (O-GLH-2P) method for nonlinear time-history analysis of structures	30
The analytical and numerical solution of the problem of stretching a system of parallel elements with random strength characteristics taking into account the postcritical stage of deformation and rigi	29
Stabilization of a cantilever pipe conveying fluid using electromagnetic actuators of the transformer type	26
Dimensional and mechanical assessment of gyroid lattices produced in aluminum by laser powder bed fusion	26
Navigating speed–accuracy trade-offs for multi-physics simulations	25
Frictional moving contact problem between a conducting rigid cylindrical punch and a functionally graded piezoelectric layered half plane	23
A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls	22
Optimal design of inerter-based absorbers with amplified inertance: from the improved tuned liquid column damper inerter (ITLCDI) to the improved tuned mass damper inerter (ITMDI) and improved tuned i	21
Clearance-induced contact trajectory uncertainty of angular contact ball bearing under coupling operating condition	21
Kinetostatic, dynamic, trajectory modeling for a new grasshopper-inspired 2DOF compliant mechanism for non-resonant vibration-assisted polishing	19
Static and dynamic characteristics of electrostatically actuated elliptical cross-section beams for NEMS applications	18
A new formula for estimation of vertical natural frequency for a scissors-type bridge through hammering tests and numerical simulation	17
Adaptive variable impedance control for a modular soft robot manipulator in configuration space	17
Secondary flow structures in developing viscoelastic fluid flow through curved ducts with square cross section	17
Artificial viscosity—then and now	16
An approach for predicting the calibration accuracy in planar cable-driven parallel robots and experiment validation	16
An analytical prediction methodology of the correlation between transmission error and tooth pitch error for face-hobbed hypoid gears	16
Spatial-averaged turbulence characteristics over staggered pattern roughness	16
An exact model for free vibration of structures coupled by arbitrarily shaped plates	16
Rate-type models of dissipative compressible fluids	15

Numerical study on the effects of liquid parameters on sclerosing foam coalescence	14
A node-to-surface linear complementarity problem approach for general three-dimensional contact analysis	14
Acoustoelastic and viscoelastic effects on guided wave characteristics in an incompressible plate	14
Investigation of locomotion validity of a vertical wall climbing single-wheel robot for curved surfaces	14
Influences of two-parameter elastic foundations on nonlinear free vibration of anisotropic shallow shell structures with variable parameters	13
Modeling and control of twisted and coiled artificial muscles for soft robotics	13
Investigation on dynamic characteristics of herringbone planetarygear system considering tooth surface friction	13
Enhancing extrusion die design efficiency through high-performance computing based optimization	13
1D and 2D porous media fixed bed reactor simulations with DUO	13
Structural response of half-scale pumice concrete masonry building: shake table/ambient vibration tests and FE analysis	12
Crystal plasticity study of stress overshoot during high-strain rate deformation	12
Gear bending fatigue life prediction based on continuum damage mechanics and linear elastic fracture mechanics	12
Workspace analysis of parallel mechanisms by considering active joints ranges of motion using a method based on interval analysis	11
Turbulent statistics and interface dynamics in a lubricated channel flow at $$Re_{\tau }=100$$	11
A form-finding method for deployable tensegrity arms and inverse kinematics	11
Optimized input shaping for multi-mode hanging chains using a modal model approach	11
A continuum model for in-plane analysis of masonry: an approach based on failure mode classification	11
An experimental procedure for the identification of the dynamic parameters for the rigid-ring tyre model	11
Design and research of new-type nozzle structure based on oil–air lubrication	11
Dynamic analysis and driving parameters study of bidirectional solar array system with multiple clearance joints	11
Flip effect of carbon nanotori	11
Tension of an inflated cylindrical membrane threaded through a hole	11
The nonlocal elasticity theory for geometrically nonlinear vibrations of double-layer nanoplate systems in magnetic field	10
On the nonlocal dynamics of third-order small-scale beams	10
Influence of elastic deformation of the blade on the flow field in the blade cascade	10
Optimization of the closed-loop controller of a discontinuous capsule drive using a neural network	10
Influence of extruder geometry and bio-ink type in extrusion-based bioprinting via an in silico design tool	10
Optimal recovery manoeuvres of racing motorcycles	10
Analysis of the photo-thermal excitation in a semiconducting medium under the purview of DPL theory involving non-local effect	10
Investigation of failure in anisotropic composite structures via an efficient data-driven multiscale strategy	10
An unified formulation of strong non-local elasticity with fractional order calculus	10
An investigation of fluid-structure interaction in pipe conveying flow using reduced-order models	9
Correction: Efficient and simplified numerical contact model for the braking simulation of a magnetic track brake	9
Power flow and efficiency analysis of 2K-V gear transmission via virtual power	9
Iterative inverse kinematics for robot manipulators using quaternion algebra and conformal geometric algebra	9
Fluid-filled toroidal membrane in contact with flat elastic substrate	9
The propagation of the multi-physical fields coupled Rayleigh wave on the half-space with a gradient piezoelectric semiconductor layer	9
Influences of bionic dual trailing-edge flaps on the aerodynamic performance of vertical axis wind turbine	9
On the human vertebra computational modeling: a literature review	9
Special issue on self-propelled robots: from theory to applications	9
Dynamic behavior analysis of planetary gear transmission system with bolt constraint of the flexible ring gear	9
Design of a 6-supports exactly constrained supporting system for superconducting magnets and its application to rotating gantries for cancer therapy	9
Influence of three dimensionality effects on thermal hydraulic performance for stepped micro pin fin heat sink	9
Elasto-viscoplastic model for rayon yarns	9
Radiation and scattering of flexural-gravity waves by a submerged porous disc	9
Experimental study of flapping-wing aerodynamic coefficients and landing performance estimation	9
On the analyticity of the abstract MGT-Fourier system	8
Numerical and theoretical studies about in-plane impact properties of Semi-Reentrant structures	8
Optimized Gauss–Legendre–Hermite 2-point (O-GLH-2P) method for nonlinear time-history analysis of structures	8
Analyzing the angular acceleration vector of a moving rigid body	8

Towards a platform-portable linear algebra backend for OpenFOAM	8
Utilisation of a wrinkled film-based structure for the sensing measurement of a vibro-impact capsule robot	8
Hybrid damping control of magnetorheological semi-active suspension based on feedback linearization Kalman observer	8
A thermal modeling approach for the piston/cylinder interface of an axial piston machine under asperity contact	8
A numerical study on fatigue design of Ti-6Al-4V total hip stem: infinite-life and damage tolerance approaches using XFEMPN-VCCT	8
Extension of Prandtl’s solution to a general isotropic model of plasticity including internal variables	8
A study on vibration localization and energy harvesting of periodic acoustic black hole structure	8
Assessment of parameters of a fractional relaxation kernel modelling viscoelastic properties of the periodontal ligament	7
Micromechanical homogenization of a hydrogel-filled electrospun scaffold for tissue-engineered epicardial patching of the infarcted heart: a feasibility study	7
Deviatoric stress waves due to rheology in incompressible thermoviscoelastic solid medium with small strain, small deformation physics	7
Evaluation of a carbon dioxide fish barrier through numerical modelling	7
Assessment of the material properties effect on the response of Morrow’s Model for estimating the dissipation of energy in fatigue of metals	7
On the entropy inequality and its exploitation in continuum physics	7
Boundary controllability for the 1D Moore–Gibson–Thompson equation	7
Periodic gaits of a locomotion system of interacting bodies	7
Friction modelling and the use of a physics-informed neural network for estimating frictional torque characteristics	7
Nonlinear dynamics of harmonic drive considering pitch deviation	7
Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flows control using experimental and optimization methods	7
Dynamic characteristics and reliability analysis of parallel mechanism with clearance joints and parameter uncertainties	7
A generalisation of the integral Maxwell model: the gK-BKZ model—frame invariance and analytical solutions	7
Elastoplastic theory of finite deformation and its solution method for non-ordinary state-based peridynamics	7
Network-based and sheet-based Gyroid lattice structures with different gradient directions: manufacture, mechanical response and energy absorption	7
Nonlinear dynamic analysis and experimental study of multi-link press with dry friction clearances of revolute joints	7
Discrete maximum principle in Hamel’s formalism for nonholonomic optimal control	7
Design and simulation of a desk-size parallel kinematic machine for simulation of seismic events	7
Efficiency evaluation of optimal TLCD and TMD for the seismic response reduction of buildings considering soil-structure interaction effect	7
Spur gear teeth profile optimization through tensor-based kinematics: integrating the Reuleaux method with differential evolution	6
Correction to: An extended 2D Gao beam model	6
Image-based structural kinematic limit analysis for historical masonry structures	6
Dynamics analysis of the round-wheel compound bow model	6
Manufacturing and characterization of compliant Cardan joints obtained by a new combined fabrication process	6
Using a robust mu-synthesis based controller to eliminate the adverse effects of uncertainties and external disturbances in nonlinear 3D overhead cranes with hoisting mechanism	6
Transport in a stochastic double diffusivity model	6
Nonlinear responses of unbalanced flexible rotating shaft passing through critical speeds	6
Rarefaction pulses on tensegrity lattices are just $$\text {sech}^2$$-solitary (dark) waves	6
Nonlinear vibration response of shear deformable FGM sandwich toroidal shell segments	6
Experimental investigation and numerical analysis: fracture mechanics and microstructural development in Ni55.8Ti superalloy under mixed-mode loading at different temperatures	6
Unified infinitesimal kinematics of a 3-RRR/PRR six-degree-of-freedom parallel-serial manipulator	6
Research on frictional characteristics of a space split telescope deployable mechanism variable diameter internal drive device in the inter-stage transition phase	6
A computational scheme for investigating statically admissible internal forces in masonry domes and vaults	6
Blocking dynamics of capillary-gravity waves in a two-layer fluid in the presence of surface and interfacial tensions	6
Energy absorption behavior of stiffness optimized graded lattice structures fabricated by material extrusion	6
Frequency characteristics of viscoelastic damper models and evaluation of a damper influence on induced oscillations of mechanical system elements	6
Identification of contact pressures between deformable bodies by combining finite elements and a novel hybrid minimization strategy	6
Analytical study of second free harmonic induced by a submerged horizontal plate or a submerged rectangular step	5
Densely packed membrane configurations	5
Remembering Gianpietro Del Piero	5
Lumped parameters models for the stability analysis of rotors supported on gas bearings	5
Tensile strength and elastic modulus determined in the Brazilian test: Theory and experiment	5
Trajectories of two-dimensional harmonic oscillators in a rotating frame: application to Foucault pendulum problem	5
Racing bicycle tyres: experimental indoor evaluation of relaxation length	5
Wave propagation at nano-scale in coupled transport phenomena: application to thermoelectricity	5
Hybrid film cooling geometry analysis with OpenFOAM	5
Free and forced vibrations of graphene platelets reinforced composite laminated arches subjected to moving load	5
Some general properties of the band-gap structure for quasi-periodic 1D lattices	5
Geometric stress functions, continuous and discontinuous	5
Continuous dependence in thermopiezoelectricity of nonsimple materials	5
Sensitivity to entrance conditions of wall shear stress in a curved vessel	5
Correction to: Cross-combined UKF for vehicle sideslip angle estimation with a modified Dugoff tire model: design and experimental results	5
Bending of a nanoplate with strain-dependent surface stress containing two collinear through cracks	5
Optimizing concrete durability: modeling acid resistance with recycled aggregates for sustainable construction in Cameroon	5
Exact solution to axisymmetric interface crack problem in piezo-electric transversely isotropic materials	5
Multi-scale modelling of the thermally coupled planetary roller screw mechanism with curved fractal contact	5
Numerical investigation of the effect of microfluidic flow parameters and physical properties on double emulsion droplet forming	5
Static and dynamic performance of porous Ti6Al4V tibia implant designs based on triply periodic minimal surface scaffolds	5
Numerical analysis of a problem of elasticity with several dissipation mechanisms	5
Transient lateral dynamic behavior of tire on μ-step road	5
In memory of Morton E. Gurtin	5
Robust multi-objective optimization of parallel manipulators	5
Numerical investigation on the effects of stacking pattern and thickness ratio on the ballistic performance of tortoiseshell-like glass composite	5
Thermal buckling analysis of rotationally-restrained orthotropic thin plates utilizing a two-dimensional improved Fourier series approach	5
Hydrodynamic and power conversion performance for linear and triangular dual-buoy wave energy converter array	5
Tyre rolling resistance and tyre rolling loss: a theoretical and experimental study based on a new trailer	5
Electroelastic constitutive model for dielectric semilinear hyperelastic solids with application to radial deformation of a rotating tube	5
A reduced-order lie group-based race car model for systematic trajectory optimization on 3D tracks	5
Dynamic characteristics of spur gear pair considering meshing impact and multi-state meshing	5
Shock physics in compressible thermoelastic and thermoviscoelastic solids	4
Procedures for characterization of compressive material parameters for GRE pipes, using flexural modulus test results and inverse analysis	4
Numerical analysis of ARJ21 passenger aircraft ditching dynamics using meshless methods	4
Periodic regimes of motion of capsule system on rough plane	4

Similarities in steering control between cars and motorcycles: application to a low-complexity riding simulator	4
Analysis of the compressible, isotropic, neo-Hookean hyperelastic model	4
Bifurcation analysis using modified stiffness method of group theoretic imperfections	4
A new shear formula for tapered beamlike solids undergoing large displacements	4
A simple method for solving damped Duffing oscillators	4
A novel rapid positioning method for dynamic load location based on Newmark explicit method and modal shape comparison method	4
Exploratory habitation vehicles with trim intrinsic control	4
Nonlinear dynamic modeling of tractor-trailer mobile robots with consideration of wheels inertia and their optimal point-to point path planning	4
Modelling the spatially periodic deformation pattern of the surrounding rock near deep level tunnels by strain gradient elasticity theory	4
Modeling of low Mach number unsteady turbulent pipe flows	4
A statistical boundary for 3D rarefied flows through meshes: implementation to a new version of dsmcFoam+ and wind tunnel validation	4
Comparison between topological and surface sensitivities for shape optimization	4
A comparative study of wave scattering by non-porous and porous flexible plates in the presence of a submerged porous structure	4
Controlling flow separation around tandem circular cylinders using transverse magnetic field	4
Multi-scale modelling and simulation of effective properties of perforated sheets with periodic patterns	4
Model-based deep reinforcement learning for accelerated learning from flow simulations	4
Feasibility of penguin geometric features for the biomimetics applications: overview and analysis	4
Experimental and numerical mechanical characterisation of additively manufactured polymeric lattice structures under uniaxial tensile load	4
Electrostatic pull-in instability for tweezer architectures	4
Thermomechanical analysis and additive manufacturing of a target for nuclear physics	4
An efficient intrusive deep reinforcement learning framework for OpenFOAM	4
An optimization-based identification study of cylindrical floating ring journal bearing system in automotive turbochargers	4
Discrete macro - models of nonlinear interlocking mechanisms in the out-of-plane failure of masonry walls	4
Buckling analysis of cylindrical silicon electrodes considering the two-phase lithiation process	4
The geometry of the equilibrium of forces and moments in shells	4
Functional resonator-based nonlocal FGP hollow adsorber for wide detection of coupled biomolecules using DQM framework	4
Transport and evaporation of virus-containing droplets exhaled by men and women in typical cough events	4
Modeling and analyzing of torsional dynamics for helical gear pair considered double and three teeth drive-side meshing	4
Damage detection in cracked structure rotating under the fluid medium through radial basis function neural network technique	4
Dynamic behavior investigation of capillary rising at various dominant forces using free energy lattice Boltzmann method	4
Prediction of the profile of a vertical air-entraining vortex	4
Influence of coalescence-induced droplet jumping by W-shaped groove structures on superhydrophobic surfaces	4
A novel method of reconstructing planar flow field from given distribution of single velocity component: comparison to conventional divergence-free approach	4
Robust shape optimization of the FDA blood pump	4
Driven oscillating nonlinear acoustic waves	3
Two-scale topology optimization method combined with fast non-dominated sorting genetic algorithm II	3
Generalized flutter reliability analysis with adjoint and direct approaches for aeroelastic eigen-pair derivatives computation	3
Centimeter-Scale Wind Turbines Design and Analysis	3
Tribo-dynamic modelling and analysis for a high-speed helical gear system with time-varying backlash and friction under Elastohydrodynamic Lubrication condition	3
Compensated velocity feedback for non-collocated active vibration control	3
Effects of turbulence boundary conditions on Spalart-Allmaras RANS simulations for active flow control applications	3
A pseudo 3D cooling heat sink model designed by multi-objective topology optimization method	3
Snapthrough response of doubly curved laminated shells for pressure sensing applications	3
A computationally robust solution to the contact problem of two rotating gear surfaces in space	3
Modelling architected plate using a non-local derivative-free shear deformable plate theory	3
A computed tomography-based limit analysis approach to investigate the mechanical behavior of the human femur prone to fracture	3
Nonlinear response of a planar repetitive space truss with joints based on multi-harmonic equivalent model	3
On the existence of solutions to generalized Navier–Stokes–Fourier system with dissipative heating	3
Correction to: Acceleration waves in thermoelastic complex media with temperature-dependent phase fields	3
A novel impact model for the rocking motion of masonry arches	3
Non-linear frequency-matching of the centrifugal distance to optimize the rotating frequency range by stabilizing non-linear oscillations	3
Instability analysis of buckling of graphene nanoribbons coated with nano-film considering shear effect	3
A new formulation and free vibration analysis of a nonlinear geometrically exact spinning Timoshenko beam	3
Lateral load response of a dry-joint masonry arch subject to vertical support displacements by rigid block analysis	3
Analysis of dynamic characteristics of cantilevers excited at the fixed end in dynamic atomic force microscopy in liquid environments	3
Incorporating working volume and projected area in design criteria for automotive SLA suspension	3
Dynamic modeling and vibration control of a large flexible space truss	3
Investigation of droplet collision characteristics with moving film and its comparison with stationary film: unsteady and 3D CLSVOF method	3
Controlling chaos in bi-stable energy harvesting systems using delayed feedback control	3
Navier–Stokes equations: a new estimate of a possible gap related to the energy equality of a suitable weak solution	3
A fault detection strategy for an ePump during EOL tests based on a knowledge-based vibroacoustic tool and supervised machine learning classifiers	3
Waves in the theory of elasticity for triple porosity materials	3
Instability of double-diffusive natural convection in a vertical Brinkman porous layer	3
Nonlinear nonholonomic systems: a simple approach and various examples	3
On the reduction of nonlinear electromechanical systems	3
Inspection of ratcheting models for pathological error sensitivity and overparametrization	3
Dynamic modeling of a class of parallel-serial mechanisms by the principle of virtual work	3
Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints	3
A 6-ring embedded strain sensor	3
Magnetic active mass damper, design and assessment	3
Elementary scales and the lack of Fourier paradox for Fourier fluids	3
Plane harmonic waves in saturated mixtures of soils	3
Theoretical calculation methods of stable bearing capacity for thin-walled shells with corrosion and variable temperature	3
Time fractional calculus for liquid-path dynamic modelling of an isolator with a rubber element and high-viscosity silicone oil at low frequency	3
CFD and ray tracing analysis of a discrete nozzle for laser metal deposition	3
Development and kinematic analysis of origami-inspired retractable roof structures	3
Dynamics of an aerial cableway through a time-varying meshing finite element approach	3
Monolayered pantographic waveguides admit elastic rarefaction solitary waves	3
Different dynamics of a periodic mass-in-mass nonlinear chain during a single mode excitation	3
Electrostatic comb drive actuators with variable gap: nonlinear dynamics at primary resonance	3
A method to enhance the nonlinear magnetic plucking for vibration energy harvesters	3
Tunable dissipation in elastic metamaterials via methodic reconfiguration of inertant mechanical networks	3
Advanced sealing technology in mechanical systems with magnetorheological fluid for large gap applications	3
Optimal design of a novel tuned mass rate-independent damper for structural vibration suppression	3
An anisotropic nonlinear multiscale damage model for mechanical behavior of a composite laminate with matrix cracks	3
Numerical modelling of the KOBO extrusion process using the Bodner–Partom material model	3
Estimation of dynamic load factors for elastic cylinders under dynamic internal pressure	3
The interplay between membrane viscosity and ligand-binding receptor kinetics in lipid bilayers	2
Coupled axial-bending vibration of axially functionally graded Timoshenko cantilever beams of non-uniform cross-section with an attached rigid body	2
Linear-shear-current modified nonlinear Schrödinger equation for gravity-capillary waves on deep water	2
Dynamic characteristics of rotor system with parallel and angular misaligned involute spline coupling	2
Angular dynamics of molecular bodies	2
Control and navigation problems for model bio-inspired microswimmers	2
A variational formulation for three-dimensional linear thermoelasticity with ‘thermal inertia’	2
Effects of the rotation of the central black hole in a disk galaxy model	2