Metal Science and Heat Treatment

Papers
(The TQCC of Metal Science and Heat Treatment is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Metal Science and Heat Treatment Volume 65, Number 1237
Cast Functionally Graded Materials Based on Chromium White Irons for Fabricating Grinding Bodies29
Effect of Pack Siliconizing on Mechanical Properties of a Tool from Steel AISI D2: Experiment and Optimization15
Study of the Structure and Properties of Billets from Alloy EP741NP Obtained by Hot Isostatic Pressing13
Optimization of the Annealing Mode of Heat-Resistant Bearing Steel VKS17-ID (M50NiL)12
Effect of Cyclic Annealing Mode on Microstructure and Hardness of Structural Steel 50KhFA11
Flow Stress Behavior and Governing Equation of Plastic Flow of Low-Carbon Steel at Elevated Temperatures9
Effect of Stage Aging on the Structure and Martensitic Transformation Temperatures of Alloy Ti – 55.6 Wt.% Ni7
Effect of Crucible Diameter on the Microstructure of an Al – Si Alloy Prepared by Controlled Diffusion Solidification7
Spiral Substructures of Nanowires Determined by the Universal Building Unit (Tetrablock)7
Formation of Composite Material by Magnetic Pulse Welding of Crystalline Titanium and Nickel-Based Amorphous Alloy6
Metal Science and Heat Treatment Volume 64, Number 46
Effect of Complex Alloying of the Damping Capacity of Mn – Cu Alloys in the Range of Amplitude-Independent Damping6
Effect Heat Treatment on the Structure and Properties of NiCrSiBC Surfaced on Steel P916
Metal Science and Heat Treatment Volume 64, Number 126
Investigation of the Structure and Properties of AK5M2 Alloy Following Surface Modification with Titanium and Electron Beam Irradiation6
Effect of Alloying on the Occurrence of Phase Transformations During Continuous Heating of Quenched Model Titanium Pseudo-Alpha-Alloys5
Effect of Tempering on the Structure and Properties of Wedded Joints of Low-Alloy High-Strength Steels Formed by Gas Tungsten Arc Welding5
Nature Detection of Internal Defects in Railroad Rails Produced by EVRAZ ZSMK Company Using Ultrasonic Control in Mill Flow5
Hot Deformation Behavior of Duplex Stainless Steel 22055
Study on the Effect of Current Pulsing During Gas Tungsten Arc Welding of Ti – 6Al – 4V Alloy5
Features of Development of the Process of Thermal Fatigue of Metals and Methods of Its Assessment5
Effect of Q&P and Q&T Treatments on the Stability of Austenite and Mechanical Properties of Steel 0.2% C – 8.5% Mn – 3.0% Al4
Structure and Properties of Al – Ni – Fe Coatings on Steel 35 Obtained by Electrospark Deposition4
Special Features of Formation of Surface by Selective Laser Melting4
Regularities of Surface Hardening of Steel 20Kh13 (X20Cr13) by Alloying with the Material of WC – Co Tool During Friction Stir Processing4
Regular Features of Structural and Phase Transformations in Cold-Resistant Steel of Strength Class 1100 MPa4
Metal Science and Heat Treatment Volume 65, Number 104
Distribution of Alloying Elements in Multi-Pass Welded Joints of Chromium-Nickel Steel4
Effect of Operating Factors on Fatigue Fracture of Steel Drill Pipes4
Effect of Heat Treatment on Two-Phase Ti – 22Al – 25Nb Alloy Phase Composition and Microhardness4
Comparison of the Structure and Properties of a Tube from Titanium Alloy Ti – 3% Al – 2.5% V with Results of Digitalization of the Process of its Pressing4
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Hot-Rolled Plate from Duplex Stainless Steel 22053
Effect of Hot Deformation on the Structure and Properties of Surface Layer of 304 Steel Modified by Electron Beam Cladding of Boron-Containing Powder Mixtures3
Effects of Hybrid SiC/Al2O3 Particles on the Mechanical Behavior of Al-MMC Prepared by Stir Casting3
Analysis of Microstructural Parameters of a Layer Clad from Fe – C – Si – Mn – Cr – Ni – Mo – V Powder Wire3
Patterns of Changes in the Nonequilibrium Solubility of Transition Metals in Aluminum Alloys3
In Situ Measurement of Stresses in Oxide Scales3
Kinetics of Austenitic Nitriding and Properties of Ni – Co – Cr – W – Ti Alloy3
Application of Schaeffler Diagram for Predicting the Structure and Mechanical Properties of Heat-Resistant Steels with More than 10 wt.% Cr3
Mechanisms of Intragrain Plastic Deformation in Steel Heating Process3
Microstructure and Properties of Nanocomposites with Graphene-Reinforced Aluminum Matrix3
Acceleration of Solid-Phase Chromizing of Steel by Intrinsic Thermionic Field3
Methodology for Prediction of Microstructure and Mechanical Properties of the Heat-Affected Zone of a Joint of a High-Strength Steel Welded in Different Media3
Impact of Second-Phase Particle Dispersion on Abnormal Grain Growth3
Analysis of Nonmetallic Inclusions in Articles from Austenitic Steel Obtained using Laser 3D Printing3
Effect of Quenching and Tempering on the Structure and Properties of Hot-Rolled Pipe Steels of Strength Categories K60 and K653
Changes in the Structure and Mechanical Properties Under Heat Treatment of AlSi10Mg-Type Aluminum Alloys Obtained by Selective Laser Melting3
Effect of Rotary Forging on the Microstructure and Mechanical Properties of Al – Cu – Mn Alloys Used in Electrical Engineering3
Changes in the Kinetics of Hardening During Aging of Magnesium Alloy of the Mg – Y – Gd – Zr System Alloyed with Other Rare Earth Metals3
The Influence of Various Heat Treatment Modes on the Structure, Mechanical and Thermal Properties of the 51CrV4 Steel3
Effect of SIMA (Strain Induced Melt Activation) Process on the Microstructure and Mechanical Properties of Zn – 27Al Alloy3
Effects of T6 Heat Treatment on Mechanical Properties and Corrosion Behaviors of Al – 9.5Si – 1.5Cu – 0.45Mg Alloy3
Metal Science and Heat Treatment Volume 64, Number 72
Effect of Powder Composition Characteristic Temperatures And Input Energy Density on Microstructure and Internal Stresses of Nickel- and Cobalt-Based Heat-Resistant Alloys Produced by Selective Laser 2
Structure and Properties of Sheets from Heat-Resistant Titanium Alloy VT82
Effect of Heat Treatment on Mechanical Properties and Microstructure of Advanced High-Strength Steel2
Modern Methods of Creation and Application of Powder Ferritic/Martensitic ODS Steels2
Evolution of the Phase Composition of High-Strength Laser Welded Joints of Aluminum-Lithium Alloys. 2. Structural and Phase Composition After Heat Treatment2
Thermal Stability of Microstructure on Heat Treatment of Friction Stir Welded AA2014-T651 Aluminum Joints2
Increase in Low-Carbon Steel 12GBA Strength and Cold Resistance by a Deformation-Thermal Effect2
Effect of Final Rolling Temperature on Microstructure, Mechanical Properties, and Strengthening Mechanism of High-Strength Ti – Zr Composite Microalloyed Steels2
Effect of Heat Treatment on Microstructure and Hardness of a High-Chromium Cast Iron Roll2
Binary Phase Diagrams in the Science of Metals2
Tempering of Martensite of Medium-Carbon Steel2
Modeling by a Molecular Dynamics Method of Structural Changes of a BCC Metal Surface Layer with Short-Term High-Energy External Action2
Investigating the Effect of Residual Thermal Stress on Mechanical Properties in SiCp Particle-Reinforced WE43 Magnesium Matrix Composites by Finite Element Method2
Mechanical Properties of Low-Cost Aluminum-Matrix Hybrid Composites Reinforced With Industrial Waste Quarry Dust2
Effect of Concentration of SiO2 Nanoparticles in the Electrolyte on the Composition and Properties of Oxide Layers Formed by Plasma-Electrolytic Oxidation on Silumin AK72
Microstructure and Properties of Cu – Cr – Zr Alloys After Plastic Deformation and Aging2
Mathematical Modeling of the Argon Arc Welding Process. Part 2. Welding of HP40NbTi Alloy Pipelines2
Microstructural and Electrical Characteristics of (Bi0.5Na0.5)TiO3 – ZnO Piezoceramics2
Isotropic Precipitation-Hardening Alloys Based on Samarium-Cobalt Compounds with Increased Magnetic Stiffness2
A Study of the Structure and Properties of the Material of Aircraft Engine Bearing2
Determination of Macrohardness of Titanium Alloys of Different Classes by Indentation by the Oliver and Pharr Method Under Low Loads2
Correction to: Effect of Direction of Additional Rolling on Anisotropy of Microstructure, Mechanical and Electrical Properties of Sheet Aluminum Alloy AA70752
Growth Kinetics and Microstructure of Iron Boride Layers on AISI 1050 Steel2
Structure and Phase Composition of Heat Treated Al – Zr Bimetal2
Inheritance of Structure and Texture in Alloy Zr – 2.5% Nb2
Microstructure, Strain Recovery Characteristics and Corrosion Resistance of Ti–V– Al– Zr Lightweight Shape Memory Alloy2
Structural, Physical and Mechanical Aspects of the Effect of Structural-Wave Magnetic Resonance Treatment on Low-Carbon Martensitic Steels2
Structural State of Martensite and Retained Austenite in Carbon Steels after Quenching in Magnetic Field2
Magnetic Pulse Welding of Titanium Plates: Experimental Study and Numerical Simulation2
Raising the Impact Toughness of Welded Joints of Large-Diameter Pipes Formed with the Use of Hybrid Laser-Arc Welding2
Study of the Structure and Properties of Blanks Obtained from Chips of Magnesium Alloy MA5 (AZ80A)2
Influence of Thermal Aging on Tensile-Plastic Flow Behavior of Indian Steel RAFM (F82H)2
Microstructure and Mechanical Properties of Aircraft Steel 30Kh2GSN2VM2
Method for Assessing the Structural Stability of Refractory Nickel Alloys Based on Determination of Parameter PS of Phase Stability2
Second Phase Precipitation on Heating Quenched Ti – 14% Mo Alloy2
Study of Structural-Phase Transformations and Kinetics of Decomposition of Supersaturated Solid Solution of Fire-Resistant Magnesium Alloy VML262
Effect of Thermocycling Treatment on Physicomechanical Properties of Low-Carbon Martensitic Steel 15Kh2G2NMFB for Parts of Precision Devices2
Influence of Acid Concentration in Combined Cleaning of Gas Turbine Nozzle Blades from Metal Oxides2
Effect of Various Aging Temperatures on the Tensile Performance of Aluminum Alloy 2219-T87 Plate2
Effect of Aging Treatment on Mechanical and Electrical Properties of Al – 0.35Cu – 0.18Sc – 0.06Zr Conductors for High-Performance Applications2
Effect of Deformation Rate on the Microstructure and Drawability of Medium-Carbon Steel2
Mechanism of the Influence of Microadditions of Niobium on Microstructure and Properties of Thick-Sheet Low-Alloy Pipe Steel2
Effect of Reinforcement with Ceramic Microparticles on Structure and Properties of Composites with an Aluminum Matrix2
Effect of the Cooling Rate from the Temperatures of β-Range on the Structure and Properties of Alloys of the Ti – Cr System2
Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel2
On the Issue of Scientific Terms in Contemporary Metal Science2
Heterogeneous Nucleation During Solidification2
Electrolyte-Plasma Production of Metal Powders for Additive Manufacturing2
Crystallographic Laws of Formation of Recrystallization Texture in a Copper Capillary Tube2
Effect of Alloying Elements and Technological Parameters of Austempering on the Structure and Mechanical Properties of Ductile Cast Iron (ADI)2
Metal Science and Heat Treatment Volume 64, Number 92
Effect of Microstructure on the Fracture Behavior and Fatigue Properties of Drill Pipes from Aluminum Alloys 1953 and 20242
Metal Science and Heat Treatment Volume 65, Number 11
Effect of the Rate and Temperature of Hot Deformation on Strain Resistance of Duplex Stainless Steel1
Simulation of the Thermal Cycle of Electron-Beam Welding of Alloy VT6 (Ti – 6Al – 4V) Obtained by Rolling and Selective Laser Melting. 2. Comparative Analysis of Microstructures and Phase Compositions1
Effect of Tempering Temperature on the Structure and Mechanical Properties of Medium-Carbon Steel with Elevated Silicon Content1
Dilatometric Study of Structure Formation in Steel 30Kh2GSN2VM Under Quenching-Partitioning and Austempering1
Crystallographic Features of Phase Transformations in Titanium Alloy VT61
Effect of Heat Treatment on Microstructure and Mechanical Properties of High-Strength Steel XAR5001
Formation of Tin Phase in Hypersonic Spraying of Titanium Alloys1
Analysis of the Structure and Properties of Pipe Welded Joint from Heat-Resistant Alloy HP40NbTi Obtained by Pulsed GTAW1
Effect of Hydrogen Sulfide Containing Environment on the Characteristics of Strength, Cyclic Endurance and Magnetic Properties of Cr – Mo – V – Nb Pipe Steel1
Effect of Heat Treatment on the Structure and Properties of Pressed Semiproducts from Advanced Aluminum Superalloy V-19771
Deformation and Ductility of Low-Carbon Steel with Different Magnitudes of Strain Aging Effect. 3. Loss of Ductility During Strain Aging of Steel1
Metal Science and Heat Treatment Volume 65, Number 21
Effect of Heat Treatment on the Structure and Mechanical Properties of Tool Steel 1.6% C – 12% Cr – 0.8% Mo – 0.9% V1
Microstructure and Properties of Powder Composites with Aluminum Matrix Reinforced with Carbon Nanomaterials1
Wear Resistance of Aluminum Alloy A356 After Thorough Anodic Oxidation1
Tensile Deformation Behavior of Steel 20Kh3 After Quenching and Tempering1
Texture of Alloy Inconel 718 Obtained by Electron Beam Melting1
Effect of Molybdenum Electron-Beam Cladding on the Heat and Wear Resistances of Surface Layers of Chromium-Nickel Austenitic Steel 12Kh18N9T1
Impact of Electron Beam Treatment on the Structure and Phase Composition of TiB2 – Ag Coating Deposited by Electrical Explosion Spraying on a Copper Substrate1
Use of Thermocycling Deformation for Raising the Operating Properties of Low-Carbon Steel1
Multi Response Optimization of Welding and Tempering Parameters of 10 mm Thick Dissimilar Sheet Steels1
Fractographic Features of Ultrafine-Grained Metals After Tension Accompanied by Pulse Current1
Metal Science and Heat Treatment Volume 64, Number 11
Microstructure and Operational Properties of Low-Alloy Low-Carbon Steel for Building Structures1
Effect of Heat Treatment on Alloy GH901 Microstructure and Mechanical Properties1
Metal Science and Heat Treatment Volume 64, Number 51
Contribution of V. I. Dobatkin Into the Development of Scientific Concepts and Practical Application of Processes of Structural Hardening of Aluminum Alloys1
Procedure of Control of the Heat Treatment of Cast Parts of Freight Cars1
Kinetics of Formation, Metallurgical and Tribological Properties of Iron Boride Surface Layer on Steel ASTM A5721
Analysis of the Kinetics of Isothermal Bainitic Transformation in Alloy Steels1
Martensitic Transformation in Austenitic Steel 316L Produced by Additive Technology1
Helical Substructures of Close-Packed Metals Determined by a Universal Building Unit (Tetrablock)1
Morphology of Secondary Phase Particles and Stability of Subgrain Structure in Martensitic Steel 10Cr9Co3W2MoVNbB (ASTM A335 P92) Under Creep Conditions1
Effect of Tempering Temperature on Mechanical and Corrosion Properties of Modified Martensitic Stainless Steel CA6NM1
Effect of Double Austenitization on the Microstructure and Hardness of High-Carbon Steel 1.4% C – 11.7% Cr1
Change in Phase Lattice Spacing in Al – Si Alloys After Electron-Beam Treatment1
Mechanism of Formation of Microstructure Under Secondary Recrystallization in a Material with Disperse Particles of Second Phase1
Polymer Model of a Close-Packed Metallic Melt1
Prospects of Application of Volume-Surface Quenching for Vehicle Parts Made of Steels with Reduced Hardenability1
Analysis of the Structure and Properties of Cd – Ag – N Coating Formed on Copper by Electron-Ion-Plasma Sputtering1
Special Features of Structure Formation and Properties of Special High-Alloy Alloys of the Al – Si – Cu System1
Correction to: Wear Resistance of Aluminum Alloy A356 After Thorough Anodic Oxidation1
Effect of Sc and Zr Additions on Microstructure, Mechanical Properties and Corrosion Behavior of 7075 Aluminum Alloy1
Metal Science and Heat Treatment Volume 65, Number 51
Metal Science and Heat Treatment Volume 65, Number 91
Patterns of the Formation of Reduced Hardness Zones in a Welded Joint of Railway Rails1
Comparison of the Effect of Microadditions of Niobium, Titanium and Vanadium on Formation of Microstructure of Low-Carbon Low-Alloy Steels1
Mechanical Properties of Composite Materials Based on Fe – 18% Cr – 10% Ni Alloy Obtained Using Laser Heat Treatment1
Evolution of Microstructure and Properties of Al Wires after Drawing Deformation and Annealing1
Influence of the Structure on the Mechanical Properties of Rods Made of Ti6Al4V Titanium Alloy1
Effects of Stress Concentrator, Loading Diagram and Corrosive Environment on Cyclic Fatigue Life of Drill Pipes from Aluminum Alloy 1953T11
Effect of Laser Hardening and Gas Nitriding on Wear Resistance of Steel P20: A Comparative Study1
Special Features of Structure and Phase Transitions of Al – Fe – Cr Alloy under Different Crystallization Conditions in Additive Technologies1
Creation of Sparingly Alloyed Cold-Resistant Steels with Strength Level of at Least 950 MPa for Heavily Loaded Equipment1
Crystallographic Features of Phase Transformations in Steel 100KhN3A1
Principles for Creating Aluminum-Based Alloys Sparingly Alloyed with Scandium1
A Study of Gas-Saturated Layer After Oxidation of Alloy Ti6242S at 500 – 800°C1
Effect of Selective Laser Melting Mode on the Structure and Properties of an Alloy Based on Ti2AlNb Titanium Aluminide1
Production of Medical Titanium Alloys with a Reduced Modulus of Elasticity by Selective Laser Melting. Review1
Structure, Physical and Mechanical Properties of Aluminum Matrix Composites Reinforced with Carbide Particles1
Effect of the Temperature and Rate Parameters of Hot Deformation on the Mechanical Behavior of Forged Titanium Alloy VT14 Under Compression and Tension1
Review of Synthesis Methods, Microstructure and Properties of WC – Co-Based Hard Alloys1
Metal Science and Heat Treatment Volume 65, Number 31
Metal Science and Heat Treatment Volume 64, Number 61
Special Features of the Kinetics of Boriding of Binary Fe – Ni Alloys1
Correction to: Influence of Sliding Rate and Load with Friction on NiTi Shape Memory Alloy Wear Resistance1
Analysis of Results of Impact Bending Tests of Base Metal Samples and Welded Joints of Pipes From Low-Carbon Pipe Steels1
Heat Treatment of Corrosion-Resistant Austenitic-Ferritic Steel For Immersion Pumps1
Simulation of the Thermal Cycle of Electron-Beam Welding of Alloy VT6 (Ti – 6Al – 4V) Obtained by Rolling and Selective Laser Melting. 1. Comparative Analysis of Weld Geometry and Microhardness1
High-Temperature Tempering Affects the Structure and Properties of Molybdenum High-Speed Steel Deposited Onto 30KhGSA Steel1
Structure and Properties of Plasma Cladding of High-Speed Steel S2-9-2 (W2Mo9Al)1
Novel Economically Alloyed Steel for Liquefied Natural Gas Equipment and its Heat Treatment Regime1
Structure, Mechanical Properties and Features of Crack Growth Micromechanism of Maraging Steel Obtained by Hybrid Additive CMT Surfacing1
Mechanical Properties of Ultrafine-Grained Aluminum Bronze at High Deformation Rates1
Joining FE55006 Cast Iron and SAE 8620 Steel by Friction Hydro-Pillar Processing (FHPP)1
Relation Between Parameters of Indirect Texture Control and Properties of Brass and Improvement of the Quality of Rolled Products by Using Statistical Methods of Analysis and Advanced Online Managemen1
Effect of Electron Beam Treatment on the Structure, Properties and Fracture Behavior of High-Entropy Co – Cr – Fe – Mn – Ni Alloy1
Synthesis of 25Kh15K Permanent Magnets and Study of Their Properties in Service in Magnetic and Thermal Fields1
Alloying of Industrial Aluminum Alloys with Scandium1
0.24559807777405