Polymer Engineering and Science

Article	Citations
Natural Rubber Composites With Dual Mechanical and Antioxidant Properties Enabled by Orange Peel Hydrolyzates	154
Kinetic Investigation of Sub‐50 nm Polystyrene Seed Latex Synthesis Using Dual Surfactant Blends	150
Biopolymer‐based coatings for anti‐corrosion of Ti‐alloys used in b	145
Synergistic performance of polyethersulfone membranes embedded with graphene oxide‐zinc oxide nanocomposites for efficient heavy metal and dye removal with strong antibacterial properties	126
Synthesis, properties, and applications of polylactic acid‐based polymers	115
Prediction of the optimal vulcanization of a fiber‐reinforced elastomeric isolator made of natural rubber‐ethylene propylene diene monomer blend	96
Renewable thermoplastic starch/sugar alcohol blends and their oxygen barrier application	69
The synthesis and properties of biodegradable poly(butylene succinate‐b‐triethylene glycol succinate)	65
Investigating the impact of 3D printing process parameters on the mechanical and morphological properties of fiber‐reinforced thermoplastic polyurethane composites	61
Preparation of fluorinated poly(aryl ether) with high dimensional stability and high temperature resistance by photo‐thermal dual crosslinking reaction	55
Impact of winding on nanoimprinted surfaces in roll‐to‐roll nanoimprint lithography	54
Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites	52
In‐site synthesis of TiO2 in (HEMA‐AA)‐co‐PDMS hydrogel: UV resistance, optical transparency, and hydrophilicity	50
Study on the preparation and properties of the cast film and biaxially oriented film of biodegradable poly(ethylene adipate‐co‐terephthalate)	50
Role of expandable graphite on flame retardancy, smoke suppression, and acid resistance of polypropylene/magnesium hydroxide composites	48
The investigation of printing parameters effect on tensile characteristics for triply periodic minimal surface designs by Taguchi	46
New strategies for surface modification of poly (vinyl alcohol) toward click chemistry applications	45
Investigation of physical and rheological properties of LDPE/HDPE/thermoplastic starch biodegradable blend films	44
Preparation and characterization of thermo‐responsive shape memory polycaprolactone/poly(ethylene‐co‐octene) blends for 4D printing	44
Numerical simulation of poly(lactic acid) polymeric composites reinforced with nanofibrillated cellulose for industrial applications	43
Investigation of the low‐temperature properties and oil resistance of peroxide‐cured epichlorohydrin rubber and nitrile butadiene rubber blends	38
Low dielectric constant composites using covalent organic framework dispersed terpolyimide	38
Effect of poly(lactic acid) molecular weight and composition on the morphology and crystallization behavior of polyhydroxybutyrate/poly(lactic acid) blends	35
An experimental‐based thermal prediction model for butt fusion welding of polymer pipes	35
Preparation and characterization of deacetylated cellulose acetate/thermoplastic polyurethane nanofiber membranes modified with graphene oxide for methylene blue and Cr (VI) adsorption	34

Investigation of the properties of chitosan–Pluronic based nanogel drug delivery systems utilizing various Pluronic types	34
Space charge behaviors and electrical insulation characteristics in EPDM /micro‐ SiC composite wit	33
Wrinkled thermoplastic polyamide elastomer foams with enhanced mechanical properties fabricated by dynamic supercritical CO 2	31
Effect of irregular silicon carbide and tackifying phenolic resin on friction coefficients of rubber compounds	30
Study of overflow effects on flow‐induced stress in injection molding	30
Synthesis and optical properties of monomers and polymers with high refractive indexes based on piperidone thioacetals	30
Enhancing immobilization of iron oxide particles on various polymer surfaces	29
Graft copolymers of collagen and acrylic monomers—Reagents for sizing of cotton yarn	29
Preparation of high breakdown strength meta‐aramid composite paper reinforced by polyphenylene sulfide superfine fiber	28
Pressure‐dependent heat transfer coefficient measurement for thermoplastic melts	28
Tear fatigue behavior of lignin‐based sustainable rubber composites	28
Improvement of the surface quality of foam injection molded products from a material property perspective	27
Epoxidized natural rubber/acid functionalized carbon nanotubes composites for enhanced thermo‐mechanical and oxygen barrier performance	27
	27
Toward recycling polyolefin wastes via single‐step solid‐state friction extrusion	26
Composition‐dependent glass transition temperature in mixtures: Evaluation of configurational entropy models*	26
Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends	25
Hydrophobic or hydrophilic microhelices: Crafting surfaces with electrospun magnetic polystyrene fiber and an innovative top‐down technique	25
A novel zinc complex for rubber vulcanization: Enhanced mechanical properties and reduced environmental impact through ZnO substitution	25
Microwave foaming of carbon dioxide saturated poly lactic acid	25
Role of crosslinkers on the properties of bio‐based wood adhesives	25
Construction mechanism of gellan gum/chitosan/calcium ion multiple‐network hydrogel by self‐assembly strategy and its regulation	25
Hydrophilic cloth by surface modification of polypropylene fabrics with mineral particles	24
Elastic composites fabricating for electromagnetic interference shielding based on MWCNTs and Fe3O4 unique distribution in immiscible NR/NBR	24
Enhancing the Structural, Optical, and Electrical Properties of Polymer Nanocomposites Doped With α‐MoO3 Nanoplates for Advanced Energy Storage Applications	24
High‐efficiency shape memory copolymers of polycaprolactone/thermoplastic polyurethane fabricated via in situ ring‐opening polymerization	24
Optimization of electromagnetic shielding and mechanical properties of reduced graphene oxide/polyurethane composite foam	23
Optimization of carbon nanotubes in carbon black‐filled natural rubber: Constitutive modeling and verification using finite element analysis	23
Mechanically robust sodium alginate/cellulose nanofibers/polyethyleneimine composite aerogel for effective removal of hexavalent chromium and anionic dyes	23
	23
The efficient detection of Fe 3+ by sulfonamidated lignin composite carbon quantum dots	23
Synthesis, characterization, conductivity, and gas‐sensing performance of copolymer nanocomposites based on copper alumina and poly(aniline‐co‐pyrrole)	23
Determination of electromagnetic traveling path in polymer/multi‐walled carbon nanotube nanocomposite foams and analysis by Taguchi technique	23
Optimal runner design for balanced filling in a multi‐cavity mold using a two‐stage analytical approach	22
Preparation of the polyvinyl alcohol thermal energy storage film containing the waste fly ash based on the phase change material	22
Application of wet carbon black masterbatch in green mining radial tires	22
Nonwoven surface treatments for disposable hygiene products	22
Effect of oligolactic acid stereocomplex microplates as rapid crystallization nucleating agents on the properties of poly( L ‐lactic acid)	22
CQDs / ZIF ‐L Derivatives Modified PES Ultrafiltration Membranes: A	22
Tribological performance of ionic liquid modified graphene oxide/silicone rubber composite and the correlation of properties using machine learning methods	21
Accelerator‐Loaded Pyrolysis Carbon Black via Twin‐Screw Technology for Enhanced Natural Rubber Composites	21
Preparation and Performance Research of RSC‐g‐P(AA‐AM)/SiO2 Composite Water‐Retaining Materials	21
Rearrangement and morphological transition of DNA on adsorbent templates of hydrocarbon/fluorocarbon phase‐separated monolayers	21
Enhanced Impact Properties of High‐Recycled Content Polycarbonate‐Polybutylene Terephthalate Blends	21
Influence of a biodegradable contaminant on the mechanical recycling of a low‐density polyethylene sample	20
Fiber Bragg grating detection of gel time and residual strain of curing in epoxy resins	20
Preparation and properties of reinforced SEBS‐based thermoplastic elastomers modified by PA6	20
The effects of nanoclay and carbon nanotube co‐addition on properties of an amorphous polyamide/maleated styrene‐ethylene‐co‐butylene‐styrene blend	20
Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching	20
Improved melt strength and processability of impact copolymer polypropylene by introducing long‐chain branching via reactive extrusion with “ene” functionalized dendrimer	20

Characterization of structural properties and non‐linear rheological behavior of collagen over a wide range of mass fractions under LAOS	19
Issue Information	19
Optimization of fused filament fabrication process parameters for mechanical responses of weather‐resistant polymer (acrylonitrile styrene acrylate)	19
Permeability in barrier membranes: Comparison between experiments, direct calculations, and analytical models	19
Effect of blend composition on the adhesion strength of EVA‐g‐MA/LLDPE‐g‐MA films to epoxy substrates	19
Modification of reactive PB‐g‐SAG core–shell particles to achieve higher toughening ability for brittle polylactide	19
Waste PET‐Derived Sustainable and Efficient Hydrogel for Removal of Fe3+	19
Evaluation of the impact of natural weathering on the properties of high‐density polyethylene bottles by experimental approach	19
Optimal design and operation of reactive extrusion processes: Application to the production and scale‐up of polyurethane rheology modifiers for paints	19
Nanostructured Zinc Oxide–Enhanced Biopolymeric Films for Advanced Wound Healing Applications	18
Assessing the Miscibility of Synthetic and Natural Polyols Through Hansen Solubility Parameters for Polyurethane Formulations	18
Catalyzed Michael addition, polycondensation, and the related performance of Diels–Alder self‐healing crosslinked polyamides	18
Investigation on the mechanical and fracture properties of lightweight pumice epoxy composites	18
Influence of Selenicereus undatus (Dragon Fruit) Peel Powder as a Reinforcement Filler on the Mechanical, Water Absorption, UV Shielding, and Biodegradation Properties of Polyvinyl A	18
The UV stability of polyethylene pipes with different comonomer content: Effect of carbon black masterbatch	18
The Influence of Pressure Environment on the Cellular Morphology of Foamed Polypropylene and Finite Element Simulation	18
Quantitative detection of polymer content in styrene‐butadiene‐styrene modified asphalt after aging	18
Depolymerization of Polylactic Acid in A Semi‐Batch Reactor: Product Yields and Distributions	18
Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling	18
Improvement of properties in recycled glass‐filled polypropylene using novel blend technology	17
Three body abrasion wear resistance of cenosphere particle‐reinforced syntactic foams developed using molding method	17
The conditioning relative humidity influences the gas permeability of active films and nanocomposites based on gelatin	17
Preparation and evaluation of high‐temperature filtrate reducer for solid‐free water‐based drilling fluid	17
Optimization of conductive nanofillers in bio‐based polyurethane foams for ammonia‐sensing application	17
Mechanical properties and weather stability of a novel nanocomposite coating based on fluoroethylene/vinyl ether copolymer and organically modified zirconium dioxide nanoparticles	17
Fabrication and post‐processing of PI/PVDF‐HFP/PI electrospun sandwich separators for lithium‐ion batteries	16
Effects of Halloysite Nanotubes on Binary Blends of Thermoplastic Starch With Polyhydroxybutyrate and Polylactic Acid: Investigation of Morphological, Rheological, Mechanical, and Thermal Properties	16
Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks	16
Manufacture and rheological behavior of all recycled PET/PP microfibrillar blends	16
Nonlinear Ultrasonic Nondestructive Evaluation Method for Natural Aging Degree of Buried Medium Density Polyethylene Gas Pipeline During Long‐Term Service	16
Synthesis and Characterization of Argan Oil‐Loaded Polyacrylamide Hydrogels: A Multifunctional Approach	16
Random Forest Based Approach for Predictions of Glass Transition Temperatures in Polymers	16
Naphthalene‐based polybenzimidazole cross‐linked with 3‐hexyl spacers N,N‐dimethylpiperidinium cations for alkaline anion exchange membrane water electrolysis	16
Enhanced antibacterial and adhesive properties of chitosan/gelatin hydrogel containing berberine hydrochloride and prepolymerized gallic acid exhibiting aggregation‐induced emission	15
Enhanced Strength and Thermal Stability in Nacre‐Inspired Polyvinyl Alcohol/Graphene Oxide Composites via Biomass Gasification–Derived Carbon Nanomaterials	15
Sustainable Epoxy Biocomposites Reinforced With Tenebrio molitor Biofiller: A Comprehensive Study on Thermal, Mechanical, and Dielectric Properties	15
A Novel Approach for Wear‐Resistant Epoxy Composites: Recycled Tire Rubber as Sustainable Reinforcement	15
Glycine ester ionic liquid as new co‐initiator used in initiating radical and cationic photopolymerization	15
On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing	15
Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites	15
Microwave‐assisted hydrothermal green synthesis of selenium nanoparticles incorporated with hyaluronic acid methacrylate/gelatin methacrylate hydrogels for wound healing	15
	15
Carbon Fiber Modification With CaCO3 Nanoparticles by Microwave‐Assisted Approach for Composite Reinforcement	15
	15
Temperature dependence of kinetic friction: A handle for plastics sortation?	15
Poly(vinylidene fluoride‐hexafluoropropylene)/mesoporous graphitic carbon nitride composite membranes for photocatalytic methylene blue degradation and sensing applications	15
Toward a universal polymeric dispersant for diverse pigment systems in surface coatings via azole anchoring modification	15
Compressive Strength Properties Related to Microstructure of Chemically Blown Tannin Foams	15
Phase behavior of rubber and supercritical CO2: Operating parameters and swelling characteristics	15
Further improved mechanical properties of polypropylene by shish‐kebab structure and high‐temperature annealing	14
Development of novel reversible thermometer from N‐isopropylacrylamide and dicyanodihydrofuran hydrazone probe	14
Preparation and characterization of 4D printable PCL / SEBS	14
Reactive extrusion of post‐irradiated poly(ethylene terephthalate) to improve the interfacial interactions in compounding with its immiscible polyethylene blends	14
Self‐healing reversible network from furfuryl‐functionalized copoly(triazine‐ r ‐polypropylene glycol‐ r ‐	14
Preparation and characterization of toughened polyurea aerogels incorporating linear long‐chain in the structure	14
Synthesis and characterization of pH‐responsive water‐dispersed nanohydrogels of cross‐linked polyacrylamide‐co‐polyacrylic acid	14
Surface modification of silica with polymethylmethacrylate‐ co ‐methacrylic acid for enhancement of self‐healing performance of natural rubber composites	14
Thermal and mechanical properties of aminolyzed‐poly(lactic acid) with amine‐terminated dendritic polymer: Surface and bulk functionalization	14
Preparation and properties of polyester fibers with polyacrylamide hydrogel grafted by UV‐irradiation	14
Liquid crystal epoxy composites based on functionalized boron nitride: Synthesis and thermal properties	14
Experimental study on the residual strength of butt adhesive joints subjected to systematic creep damage	14
Flow modeling in a metering section of a single screw extruder with a small helix angle based on the energy dissipation rate	14
Fabrication of Passive‐Cooling Janus Film Based on P(VDF‐HFP)/F‐SiO2 and PAA Hydrogel With Combined Effects of Evaporative–Radiative Cooling	14
Strategic cost and sustainability analyses of injection molding and material extrusion additive manufacturing	13
Synthesis and characterization of biobased copolyesters based on pentanediol: (2) Poly(pentylene adipate‐co‐terephthalate)	13
Purity prediction of the two‐stage high voltage electrostatic separation of a mixture of three polymers	13
Improved infrared stealth and electromagnetic interference shielding performance of polyimide‐derived carbon aerogels by constructing heterogeneous nanopores	13
Reactive compatibilization of zinc dimethacrylate on dynamically vulcanized thermoplastic polyurethane/silicone rubber blends	13
Development of poly(butylene adipate‐co‐terephthalate) composites with high thermal oxidation stability using Chrysanthemum morifolium extract as a natur	13
Conductive Filler‐Loaded PVDF and Pristine PVDF‐Layered Composite for EMI Shielding and as Piezoelectric Sensor	13
A focused review on recycling and hydrolysis techniques of polyethylene terephthalate	13
In‐situ experimental study on the hydrolysis and pyrolysis processes of polylactic acid	13
Polyimide dielectric nanocomposites containing functional nanofillers based on multilayer structure: Design, preparation, and properties	13
Preparation of low‐rolling resistance natural rubber composites from pyrolysis carbon black by plasma treatment	13
Effect of antibacterial masterbatches selection on the crystal structure and properties of nanosilver composite materials	13
Effect of main chain modification during reversion on strain‐induced crystallization of polyisoprene rubbers	13
Rheological investigation on polyethylene terephthalate ( PET) filled with hollow glass beads	13
The influence of cellulose content on the morphology, thermal, and mechanical properties of poly(lactic acid)/ Eucomis autumnalis	13
Recyclable and shape‐memory hydantoin epoxy resins based on dynamic ester‐exchanged bonds	13
Preparation of polyaniline/cellulose nanofiber composites with enhanced anticorrosion performance for waterborne epoxy resin coatings	13

Poly (glycerol sebacate) – co – 2 – hydroxyethyl methacrylate bioelastomeric nanohydroxyapatite composites: Mechanical properties, thermal characteristics, and cytocompatibility studies	13
Structural relaxation of an epoxy resin at temperatures well below Tg*	13
Fabrication of wafer‐level double‐sided microlens array using injection compression molding	13
Comprehensive characterization of 3D‐printed bamboo/poly(lactic acid) bio composites	13
In Vitro Biocompatibility Assessment of Lanolin Loaded Cellulose Acetate and Thermoplastic Polyurethane Nanofibers Using L929 Fibroblasts and	13
Comparative evaluation of vat photopolymerization and steel tool molds on the performance of injection molded and overmolded tensile specimens	13
Effects of polyol plasticizers on morphological characteristics and performance of injection‐molded polylactide/thermoplastic starch blends	13
Sustainable food packaging films based on alginate and aloe vera	12
Continuous Mixing of Solid Polymer Electrolyte via Solvent‐Free Extrusion With Automated Material Addition	12
Effects of process conditions on tensile strength and crystallinity of polymeric parts fabricated using ultrasonic vibration‐assisted injection molding	12
A silicone‐modified UV‐curable pressure‐sensitive adhesive initiated by redox‐induced bulk polymerization, exhibiting excellent water resistance and aging resistance	12
Electrospun chitosan/polycaprolactone wound dressing containing henna extract and vitamin C: A natural composite for wound care	12
Nanocomposite‐enhanced polymeric weak gel for conformance control in high‐salinity and high‐temperature reservoir condition	12
Synthesis and characterization of polybenzoxazine/silica‐based hybrid nanostructures for flame retardancy applications	12
Extruded polymer instability study of the polylactic acid in fused filament fabrication process: Printing speed effects on tensile strength	12
Facile fabrication and characterization of novel polyvinyl alcohol/polyethylene glycol/aluminum nitride nanocomposites	12
Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites	12
Compatibilization of poly(lactic acid)/poly(3‐hydroxybutyrate‐co‐hydroxyvalerate) blends using multifunctional epoxy‐based chain extender	12
Simple regulation of dielectric pulsing properties of polyethylene glycol‐poly(vinylidene fluoride) coaxial nanofiber films based on blow‐spinning process	12
	12
The effect of different forms of iron substances on the aging properties of carbon‐black filled natural rubber	12
Simultaneous crosslinking and foaming of ethylene‐propylene diene terpolymers (EPDM) organoclay composite foams	12
Pervaporation recovery of aniline using the degradable material poly(butylene adipate‐terephthalate): Experiment and molecular simulation	12
Understanding the influence of mixing on a solvent‐free emulsification process for highly viscous polymers using a twin‐screw extruder	12
	12
Green engineered rubber process oil for passenger tire tread component and its effect on mechanical and rheological characteristics	12
Improvement of catheter tip morphology by mold material used for tip‐forming process	11
Effect of process parameters on the performance of PA6 products fabricated by rotational molding	11
Surface modification of GO/PVDF composite membrane by MXene/protonated g‐C₃N₄ nanosheets hybrids with improved dye separation and antifouling properties	11
Effect of different UV absorbers on the aging performance of poly (butylene adipate‐co‐terephthalate)/poly (propylene carbonate) degradable mulch films	11
Investigation of mixed matrix membranes of graphene and acid‐treated graphene fillers in cellulose acetate and polyetherimide polymers for CO2 separation from biogas	11
Enhancing mechanical properties of polycarbonate parts developed by fused filament fabrication using RSM‐TOPSIS hybrid approach	11
Cover Image	11
Gelatin‐Based Nanocomposite Films: A Sustainable Green Alternative for Membrane Technology	11
Characterization, processing, and modeling of industrial recycled polyolefins	11
Investigation of electrochemical properties of lithium salt/poly(vinylidene fluoride)/polypyrrole blends	11
Issue Information	11
The effect of foaming process with supercritical CO2 on the morphology and properties of 3D porous polylactic acid scaffolds	11
Positron annihilation lifetime spectroscopic analysis of Nafion and graft‐type polymer electrolyte membranes for fuel cell application	11
Multifunctional properties optimization and stimuli‐responsivity of shape memory polymeric nanoarchitectures and applications	11
Design of lightweight silicone rubber composite foam with strong electromagnetic shielding effectiveness based on gradient structure	11
In situ temperature‐controlled rotational molding for self‐building ribs in PA6 liner for type IV hydrogen storage tanks	11
Porous cellulose microspheres loaded with dry Nile water algae for removal of MB dye and copper ions from aqueous media	11
Development of Highly Transparent and Multifunctional Lignin‐Derived Carbon Quantum Dots/PVA Composite Films for Active Food Packaging	11
Low density polyethylene composites based on flax fibers modified by a combination of coupling agent	11
Electrospun SiO2/polyimide materials based on the water‐soluble polyamiс acid salt PMDA‐ODA with an ultra‐low dielectric constant	11
Sequential Dual‐Curing via Michael Addition and Free Radical Polymerization for Wood Surface Densification	11
Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion	11
Thermal‐oxidative aging behavior of graphene and graphene oxide‐filled nitrile butadiene rubber: A molecular simulation approach	11
Waste mask supported PES membranes for efficient separation of oil/water emulsion	11
Superior EMI shielding effectiveness with enhanced electrical conductivity at low percolation threshold of flexible novel ethylene methyl acrylate/single‐walled carbon nanotube nanocomposit	11
Synthesis and Properties of Branched Waterborne Polyurethane Thickener With Multiple Arms	11
Simulation‐based analysis of weld line strength of glass fiber‐reinforced polymer in injection molding	11
Functionalized biomaterials based on poly(vinyl alcohol) and chitosan as a vehicle for controlled release of cabreuva essential oil	11
A comparative study on sPEEK‐based composite membranes with various inorganic fillers using different preparation routes for DMFCs	11
	11
Bioinspired Self‐Healing Polymers in Lithium‐Ion and Lithium Metal Batteries: A Comprehensive Review of Electrode and Electrolyte Designs	11
Preparation of high‐performance poly(butylene adipate‐co‐terephthalate)/thermoplastic starch compounds with epoxidized soybean oil as compatibilizer	11
Polydopamine coating on additive manufacturing‐based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation	10
Arrowroot Starch/Carboxymethylcellulose‐ZnO NP Films: Thermal, Tensile, and Biodegradation Properties	10
Effect of fillers on the microphase separation in polyurethane composites: A review	10
Influence of selected contaminations and melt filtration on the properties of ABS and ABS recyclate	10
The effect of flame treatment on the compressive strength of composite sandwich panels made of pure epoxy resin H‐shaped structures and hollow glass bead/epoxy resin composite material	10
Synthesis of aminopyrazine‐based fire resistant additive and its application in epoxy resin	10
Effect of functionality of diluents on digital light processing (DLP) based three‐dimensional (3D) printing of UV‐curable bisphenol A‐based epoxy acrylate resin	10
Fluid–structure‐interaction simulations of forming‐air impact thermoforming	10
Design and Network Architectures of Conductive Hydrogels: Properties, Functionalities, and Emerging Applications	10
Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with	10
Effect of polydopamine surface modification on the adhesive properties of nano‐injection molded metal‐polymer interfaces: A molecular dynamics simulation study	10
Green Epoxidized Niepa Seed Oil for Toughening Epoxy Resin: An Insight Into Viscoelastic, Mechanical, Thermal and Adhesive Properties	10
Issue Information	10
Facile Fabrication of Multifunctional Responsive Biodegradable Fluorescent/Thermochromic Luminescent Fibers Based on Poly(Lactic Acid)	10
Replication of large‐area microstructures by combining movable induction heating and roller hot embossing	10
Thermal Management of Quartz Fiber Reinforced Composites via Additive Manufacturing Method	10
	10
Construction of a rough surface in EPDM/CB composite through peroxide curing: A mechanism for optimizing physico‐mechanical properties in automotive paint‐compati	10
Effect of amine‐reactive elastomer on the properties of poly(lactic acid) films obtained by solvent‐cast 3D printing	10
Impact of the proportion between virgin and recycled polyethylene terephthalate ( rPET ) on induced microstructure and mechanical stiffness	10
Aluminum Oxide as a Partial Replacement for Zinc Oxide in the Vulcanization of Natural Rubber	10
Innovative bioaerogels from marine waste and Nephelium lappaceum leaf extract: A multifunctional biomaterial for biomedical and cosmetics	10
Preparation and characterization of polymer blend electrolyte membranes based on lithium acetate‐complexed carboxymethyl cellulose (CMC) and carboxymethyl chitosan (CMCh) blend	10
Upcycling of Waste Plastics: A Study of Injection Molded Polymethyl Methacrylate (PMMA)‐Rich Blend Containing Polystyrene (PS) and Recycled Polyethylene Terephthalate (PET	10
Performance evaluation of room temperature vulcanized silicone rubber nanocomposites aged in strong aqueous solutions	10
Mechanical and antimicrobial properties of green and photoactive AgTiO 2	10
Comparative study of the effect of cross‐linking degree on chitosan hydrogels synthesized with low and medium molecular weight chitosan	10
	10
Preparation of PEO/PMMA nanocomposite based on functionalized graphene oxide as a solid polymer electrolyte film with high ionic conductivity: Statistical approach using response	10
Profile extrusion die design: A comparative study between elastic and inelastic fluids	10
Development of hydroxyapatite/poly(3‐hydroxybutyrate‐ co ‐3‐hydroxyvalerate)/gelatin composite nanofibers to improve bone‐forming cell proliferation and	10
Multifunctional Micro/Nano‐Scale Nonwoven With Antibacterial Properties for Efficient Capture of PM0.3	10
Preparation and characterization of ethylene‐propylene‐diene monomer rubber/metal hydroxide composites by electron beam irradiation	10
Supercapacitive Performance of the Composites of Poly(Ethylene‐Thiosuccinate) With Conductive Polymers	10
Mechanical and rheological properties of poly(lactic acid) toughened by bio‐based thermoplastic polyamide elastomer	9
Investigation of swelling degree of polypropylene beads with monomers and blowing agents	9
Comparing the morphological evolution of reactive and nonreactive Polystyrene/Polypropylene polymer blends: Processing phase inversion	9