Polymer Engineering and Science

Article	Citations
Wrinkled thermoplastic polyamide elastomer foams with enhanced mechanical properties fabricated by dynamic supercritical CO2 foaming	137
Epoxidized natural rubber/acid functionalized carbon nanotubes composites for enhanced thermo‐mechanical and oxygen barrier performance	131
An experimental‐based thermal prediction model for butt fusion welding of polymer pipes	129
Investigation of physical and rheological properties of LDPE/HDPE/thermoplastic starch biodegradable blend films	121
Enhancing immobilization of iron oxide particles on various polymer surfaces	101
Investigation of the low‐temperature properties and oil resistance of peroxide‐cured epichlorohydrin rubber and nitrile butadiene rubber blends	100
Enhancing the Structural, Optical, and Electrical Properties of Polymer Nanocomposites Doped With α‐MoO3 Nanoplates for Advanced Energy Storage Applications	89
Synthesis and optical properties of monomers and polymers with high refractive indexes based on piperidone thioacetals	64
Graft copolymers of collagen and acrylic monomers—Reagents for sizing of cotton yarn	62
In‐site synthesis of TiO2 in (HEMA‐AA)‐co‐PDMS hydrogel: UV resistance, optical transparency, and hydrophilicity	53
A novel zinc complex for rubber vulcanization: Enhanced mechanical properties and reduced environmental impact through ZnO substitution	47
Microwave foaming of carbon dioxide saturated poly lactic acid	46
The efficient detection of Fe3+ by sulfonamidated lignin composite carbon quantum dots	46
Study of overflow effects on flow‐induced stress in injection molding	45
Renewable thermoplastic starch/sugar alcohol blends and their oxygen barrier application	44
Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends	43
Low dielectric constant composites using covalent organic framework dispersed terpolyimide	42
Mechanically robust sodium alginate/cellulose nanofibers/polyethyleneimine composite aerogel for effective removal of hexavalent chromium and anionic dyes	42
Toward recycling polyolefin wastes via single‐step solid‐state friction extrusion	42
Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites	40
Impact of winding on nanoimprinted surfaces in roll‐to‐roll nanoimprint lithography	40
Hydrophilic cloth by surface modification of polypropylene fabrics with mineral particles	40
New strategies for surface modification of poly (vinyl alcohol) toward click chemistry applications	37
Space charge behaviors and electrical insulation characteristics in EPDM/micro‐SiC composite with surface‐modified nano‐SiC for HVDC insulation	33
	33

Effect of irregular silicon carbide and tackifying phenolic resin on friction coefficients of rubber compounds	32
Biopolymer‐based coatings for anti‐corrosion of Ti‐alloys used in biomedical applications: A review	30
Investigation of the properties of chitosan–Pluronic based nanogel drug delivery systems utilizing various Pluronic types	30
Tear fatigue behavior of lignin‐based sustainable rubber composites	29
Effect of poly(lactic acid) molecular weight and composition on the morphology and crystallization behavior of polyhydroxybutyrate/poly(lactic acid) blends	29
Optimization of electromagnetic shielding and mechanical properties of reduced graphene oxide/polyurethane composite foam	29
Numerical simulation of poly(lactic acid) polymeric composites reinforced with nanofibrillated cellulose for industrial applications	29
Preparation and characterization of deacetylated cellulose acetate/thermoplastic polyurethane nanofiber membranes modified with graphene oxide for methylene blue and Cr (VI) adsorption	29
Elastic composites fabricating for electromagnetic interference shielding based on MWCNTs and Fe3O4 unique distribution in immiscible NR/NBR	28
High‐efficiency shape memory copolymers of polycaprolactone/thermoplastic polyurethane fabricated via in situ ring‐opening polymerization	28
Improvement of the surface quality of foam injection molded products from a material property perspective	28
Crystallization, structure, morphology, and properties of linear low‐density polyethylene blends made with different comonomers	28
Pressure‐dependent heat transfer coefficient measurement for thermoplastic melts	27
Composition‐dependentglass transition temperature in mixtures: Evaluation of configurational entropy models*	27
The investigation of printing parameters effect on tensile characteristics for triply periodic minimal surface designs by Taguchi	26
Role of crosslinkers on the properties of bio‐based wood adhesives	26
Nano fibrillated cellulose‐based foam by Pickering emulsion: Preparation, characterizations, and application as dye adsorbent	25
Prediction of the optimal vulcanization of a fiber‐reinforced elastomeric isolator made of natural rubber‐ethylene propylene diene monomer blend	25
Preparation of high breakdown strength meta‐aramid composite paper reinforced by polyphenylene sulfide superfine fiber	25
Synergistic performance of polyethersulfone membranes embedded with graphene oxide‐zinc oxide nanocomposites for efficient heavy metal and dye removal with strong antibacterial properties	25
Preparation and characterization of thermo‐responsive shape memory polycaprolactone/poly(ethylene‐co‐octene) blends for 4D printing	24
Construction mechanism of gellan gum/chitosan/calcium ion multiple‐network hydrogel by self‐assembly strategy and its regulation	24
Synthesis, properties, and applications of polylactic acid‐based polymers	23
Investigating the impact of 3D printing process parameters on the mechanical and morphological properties of fiber‐reinforced thermoplastic polyurethane composites	23
Role of expandable graphite on flame retardancy, smoke suppression, and acid resistance of polypropylene/magnesium hydroxide composites	23
Study on the preparation and properties of the cast film and biaxially oriented film of biodegradable poly(ethylene adipate‐co‐terephthalate)	23
The synthesis and properties of biodegradable poly(butylene succinate‐b‐triethylene glycol succinate)	23
Hydrophobic or hydrophilic microhelices: Crafting surfaces with electrospun magnetic polystyrene fiber and an innovative top‐down technique	22
	22
Preparation of fluorinated poly(aryl ether) with high dimensional stability and high temperature resistance by photo‐thermal dual crosslinking reaction	22
Preparation and properties of reinforced SEBS‐based thermoplastic elastomers modified by PA6	22
Issue Information	22
Nonwoven surface treatments for disposable hygiene products	22
Preparation and evaluation of high‐temperature filtrate reducer for solid‐free water‐based drilling fluid	21
Optimization of carbon nanotubes in carbon black‐filled natural rubber: Constitutive modeling and verification using finite element analysis	21
Optimization of conductive nanofillers in bio‐based polyurethane foams for ammonia‐sensing application	21
Polymer melt rheology: Advantages of frequency sweeps using randomly selected frequencies*	21
Effect of oligolactic acid stereocomplex microplates as rapid crystallization nucleating agents on the properties of poly(L‐lactic acid)	21
Evaluation of the impact of natural weathering on the properties of high‐density polyethylene bottles by experimental approach	21
Mechanical properties and weather stability of a novel nanocomposite coating based on fluoroethylene/vinyl ether copolymer and organically modified zirconium dioxide nanoparticles	21
Determination of electromagnetic traveling path in polymer/multi‐walled carbon nanotube nanocomposite foams and analysis by Taguchi technique	21
Characterization of structural properties and non‐linear rheological behavior of collagen over a wide range of mass fractions under LAOS	21
Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling	20
Catalyzed Michael addition, polycondensation, and the related performance of Diels–Alder self‐healing crosslinked polyamides	20
Improved melt strength and processability of impact copolymer polypropylene by introducing long‐chain branching via reactive extrusion with “ene” functionalized dendrimer	20
The UV stability of polyethylene pipes with different comonomer content: Effect of carbon black masterbatch	20
The effects of nanoclay and carbon nanotube co‐addition on properties of an amorphous polyamide/maleated styrene‐ethylene‐co‐butylene‐styrene blend	20
Modification of reactive PB‐g‐SAG core–shell particles to achieve higher toughening ability for brittle polylactide	20
Fiber Bragg grating detection of gel time and residual strain of curing in epoxy resins	19
Fabrication and post‐processing of PI/PVDF‐HFP/PI electrospun sandwich separators for lithium‐ion batteries	19

Application of wet carbon black masterbatch in green mining radial tires	19
Preparation of the polyvinyl alcohol thermal energy storage film containing the waste fly ash based on the phase change material	19
Manufacture and rheological behavior of all recycled PET/PP microfibrillar blends	19
Optimal runner design for balanced filling in a multi‐cavity mold using a two‐stage analytical approach	19
Permeability in barrier membranes: Comparison between experiments, direct calculations, and analytical models	18
Three body abrasion wear resistance of cenosphere particle‐reinforced syntactic foams developed using molding method	18
Influence of a biodegradable contaminant on the mechanical recycling of a low‐density polyethylene sample	18
Rearrangement and morphological transition of DNA on adsorbent templates of hydrocarbon/fluorocarbon phase‐separated monolayers	18
Naphthalene‐based polybenzimidazole cross‐linked with 3‐hexyl spacers N,N‐dimethylpiperidinium cations for alkaline anion exchange membrane water electrolysis	18
Effect of blend composition on the adhesion strength of EVA‐g‐MA/LLDPE‐g‐MA films to epoxy substrates	18
Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks	18
Investigation on the mechanical and fracture properties of lightweight pumice epoxy composites	18
Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites	17
Optimal design and operation of reactive extrusion processes: Application to the production and scale‐up of polyurethane rheology modifiers for paints	17
Depolymerization of Polylactic Acid in A Semi‐Batch Reactor: Product Yields and Distributions	17
The conditioning relative humidity influences the gas permeability of active films and nanocomposites based on gelatin	17
Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching	17
	17
Nanostructured Zinc Oxide–Enhanced Biopolymeric Films for Advanced Wound Healing Applications	17
Waste PET‐Derived Sustainable and Efficient Hydrogel for Removal of Fe3+	17
Improvement of properties in recycled glass‐filled polypropylene using novel blend technology	17
Impact of α‐cellulose as a green filler on physico‐mechanical properties of a solution grade styrene‐butadiene rubber based tire‐tread compound	17
	17
Quantitative detection of polymer content in styrene‐butadiene‐styrene modified asphalt after aging	17
Synthesis, characterization, conductivity, and gas‐sensing performance of copolymer nanocomposites based on copper alumina and poly(aniline‐co‐pyrrole)	17
Influence of Selenicereus undatus (Dragon Fruit) Peel Powder as a Reinforcement Filler on the Mechanical, Water Absorption, UV Shielding, and Biodegradation Properties of Polyvinyl A	17
Synthesis and Characterization of Argan Oil‐Loaded Polyacrylamide Hydrogels: A Multifunctional Approach	17
Optimization of fused filament fabrication process parameters for mechanical responses of weather‐resistant polymer (acrylonitrile styrene acrylate)	17
Tribological performance of ionic liquid modified graphene oxide/silicone rubber composite and the correlation of properties using machine learning methods	17
Membrane properties of sulfonated polytriazoles with molecular branching	16
Temperature dependence of kinetic friction: A handle for plastics sortation?	16
Enhanced antibacterial and adhesive properties of chitosan/gelatin hydrogel containing berberine hydrochloride and prepolymerized gallic acid exhibiting aggregation‐induced emission	16
Polyimide dielectric nanocomposites containing functional nanofillers based on multilayer structure: Design, preparation, and properties	16
Self‐healing reversible network from furfuryl‐functionalized copoly(triazine‐r‐polypropylene glycol‐r‐polydimethylsiloxane)	16
Preparation and properties of polyester fibers with polyacrylamide hydrogel grafted by UV‐irradiation	16
Development of novel reversible thermometer from N‐isopropylacrylamide and dicyanodihydrofuran hydrazone probe	16
Structural relaxation of an epoxy resin at temperatures well below Tg*	16
Reactive extrusion of post‐irradiated poly(ethylene terephthalate) to improve the interfacial interactions in compounding with its immiscible polyethylene blends	16
Preparation and characterization of 4D printable PCL/SEBS‐g‐MAH blends with excellent mechanical and shape memory properties	16
Purity prediction of the two‐stage high voltage electrostatic separation of a mixture of three polymers	16
Preparation of low‐rolling resistance natural rubber composites from pyrolysis carbon black by plasma treatment	15
Experimental study on the residual strength of butt adhesive joints subjected to systematic creep damage	15
Liquid crystal epoxy composites based on functionalized boron nitride: Synthesis and thermal properties	15
Further improved mechanical properties of polypropylene by shish‐kebab structure and high‐temperature annealing	15
Flow modeling in a metering section of a single screw extruder with a small helix angle based on the energy dissipation rate	15
Thermal and mechanical properties of aminolyzed‐poly(lactic acid) with amine‐terminated dendritic polymer: Surface and bulk functionalization	15
Toward a universal polymeric dispersant for diverse pigment systems in surface coatings via azole anchoring modification	15
Synthesis and characterization of pH‐responsive water‐dispersed nanohydrogels of cross‐linked polyacrylamide‐co‐polyacrylic acid	15
Effect of main chain modification during reversion on strain‐induced crystallization of polyisoprene rubbers	15
Strategic cost and sustainability analyses of injection molding and material extrusion additive manufacturing	15
Surface modification of silica with polymethylmethacrylate‐co‐methacrylic acid for enhancement of self‐healing performance of natural rubber composites based on metal thiolate ionic network	15
Improved infrared stealth and electromagnetic interference shielding performance of polyimide‐derived carbon aerogels by constructing heterogeneous nanopores	15
Glycine ester ionic liquid as new co‐initiator used in initiating radical and cationic photopolymerization	15
Phase behavior of rubber and supercritical CO2: Operating parameters and swelling characteristics	15
Poly (glycerol sebacate) – co – 2 – hydroxyethyl methacrylate bioelastomeric nanohydroxyapatite composites: Mechanical properties, thermal characteristics, and cytocompatibility studies	14
Microwave‐assisted hydrothermal green synthesis of selenium nanoparticles incorporated with hyaluronic acid methacrylate/gelatin methacrylate hydrogels for wound healing applications	14
Compressive Strength Properties Related to Microstructure of Chemically Blown Tannin Foams	14
Synthesis and characterization of biobased copolyesters based on pentanediol: (2) Poly(pentylene adipate‐co‐terephthalate)	14
Comprehensive characterization of 3D‐printed bamboo/poly(lactic acid) bio composites	14
A Novel Approach for Wear‐Resistant Epoxy Composites: Recycled Tire Rubber as Sustainable Reinforcement	14
Preparation of polyaniline/cellulose nanofiber composites with enhanced anticorrosion performance for waterborne epoxy resin coatings	14
Effects of Halloysite Nanotubes on Binary Blends of Thermoplastic Starch With Polyhydroxybutyrate and Polylactic Acid: Investigation of Morphological, Rheological, Mechanical, and Thermal Properties	14
On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing	14
Poly(vinylidene fluoride‐hexafluoropropylene)/mesoporous graphitic carbon nitride composite membranes for photocatalytic methylene blue degradation and sensing applications	14
A focused review on recycling and hydrolysis techniques of polyethylene terephthalate	14
Carbon Fiber Modification With CaCO3 Nanoparticles by Microwave‐Assisted Approach for Composite Reinforcement	14
Fabrication of wafer‐level double‐sided microlens array using injection compression molding	14
In‐situ experimental study on the hydrolysis and pyrolysis processes of polylactic acid	14
Effect of in situ fibrillation on polyethylene/poly(ethylene terephthalate)/multiwalled carbon nanotube electromagnetic shielding foams	14
Effect of antibacterial masterbatches selection on the crystal structure and properties of nanosilver composite materials	14
Preparation and characterization of toughened polyurea aerogels incorporating linear long‐chain in the structure	14
Reactive compatibilization of zinc dimethacrylate on dynamically vulcanized thermoplastic polyurethane/silicone rubber blends	13
Understanding the influence of mixing on a solvent‐free emulsification process for highly viscous polymers using a twin‐screw extruder	13
Effect of different UV absorbers on the aging performance of poly (butylene adipate‐co‐terephthalate)/poly (propylene carbonate) degradable mulch films	13
	13
Pervaporation recovery of aniline using the degradable material poly(butylene adipate‐terephthalate): Experiment and molecular simulation	13
Synthesis and Properties of Branched Waterborne Polyurethane Thickener With Multiple Arms	13
In situ temperature‐controlled rotational molding for self‐building ribs in PA6 liner for type IV hydrogen storage tanks	13
Effects of polyol plasticizers on morphological characteristics and performance of injection‐molded polylactide/thermoplastic starch blends	13
	13

A comparative study on sPEEK‐based composite membranes with various inorganic fillers using different preparation routes for DMFCs	13
A silicone‐modified UV‐curable pressure‐sensitive adhesive initiated by redox‐induced bulk polymerization, exhibiting excellent water resistance and aging resistance	13
Electrospun chitosan/polycaprolactone wound dressing containing henna extract and vitamin C: A natural composite for wound care	13
Multifunctional properties optimization and stimuli‐responsivity of shape memory polymeric nanoarchitectures and applications	13
Issue Information	13
Investigation of mixed matrix membranes of graphene and acid‐treated graphene fillers in cellulose acetate and polyetherimide polymers for CO2 separation from biogas	13
Simultaneous crosslinking and foaming of ethylene‐propylene diene terpolymers (EPDM) organoclay composite foams	13
The influence of cellulose content on the morphology, thermal, and mechanical properties of poly(lactic acid)/Eucomis autumnaliscellulose biocomposites	12
Effects of process conditions on tensile strength and crystallinity of polymeric parts fabricated using ultrasonic vibration‐assisted injection molding	12
Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites	12
Development of poly(butylene adipate‐co‐terephthalate) composites with high thermal oxidation stability using Chrysanthemum morifolium extract as a natural additive	12
A study of rheological properties of cellulose diacetate in acetone solution at low and high shear rates	12
Synthesis and characterization of polybenzoxazine/silica‐based hybrid nanostructures for flame retardancy applications	12
Design of lightweight silicone rubber composite foam with strong electromagnetic shielding effectiveness based on gradient structure	12
Preparation and properties of foamed cellulose acetate/polylactic acid blends	12
Simulation‐based analysis of weld line strength of glass fiber‐reinforced polymer in injection molding	12
Influence of the magnetic field on the alignment degree of the anisotropic strontium ferrites for elastomer bonded magnets	12
Functionalized biomaterials based on poly(vinyl alcohol) and chitosan as a vehicle for controlled release of cabreuva essential oil	12
Surface modification of GO/PVDF composite membrane by MXene/protonated g‐C₃N₄ nanosheets hybrids with improved dye separation and antifouling properties	12
Porous cellulose microspheres loaded with dry Nile water algae for removal of MB dye and copper ions from aqueous media	12
Sustainable food packaging films based on alginate and aloe vera	12
Recyclable and shape‐memory hydantoin epoxy resins based on dynamic ester‐exchanged bonds	12
Green engineered rubber process oil for passenger tire tread component and its effect on mechanical and rheological characteristics	12
Superior EMI shielding effectiveness with enhanced electrical conductivity at low percolation threshold of flexible novel ethylene methyl acrylate/single‐walled carbon nanotube nanocomposit	11
	11
Investigation of electrochemical properties of lithium salt/poly(vinylidene fluoride)/polypyrrole blends	11
Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion	11
The effect of foaming process with supercritical CO2 on the morphology and properties of 3D porous polylactic acid scaffolds	11
Nanocomposite‐enhanced polymeric weak gel for conformance control in high‐salinity and high‐temperature reservoir condition	11
Simple regulation of dielectric pulsing properties of polyethylene glycol‐poly(vinylidene fluoride) coaxial nanofiber films based on blow‐spinning process	11
Cover Image	11
Facile fabrication and characterization of novel polyvinyl alcohol/polyethylene glycol/aluminum nitride nanocomposites	11
Effect of fillers on the microphase separation in polyurethane composites: A review	11
Issue Information	11
Thermal‐oxidative aging behavior of graphene and graphene oxide‐filled nitrile butadiene rubber: A molecular simulation approach	11
Issue Information	11
Compatibilization of poly(lactic acid)/poly(3‐hydroxybutyrate‐co‐hydroxyvalerate) blends using multifunctional epoxy‐based chain extender	11
Extruded polymer instability study of the polylactic acid in fused filament fabrication process: Printing speed effects on tensile strength	11
Rheological investigation on polyethylene terephthalate (PET) filled with hollow glass beads	11
	11
The effect of flame treatment on the compressive strength of composite sandwich panels made of pure epoxy resin H‐shaped structures and hollow glass bead/epoxy resin composite material	11
	11
Effect of functionality of diluents on digital light processing (DLP) based three‐dimensional (3D) printing of UV‐curable bisphenol A‐based epoxy acrylate resin	11
Effect of polydopamine surface modification on the adhesive properties of nano‐injection molded metal‐polymer interfaces: A molecular dynamics simulation study	11
Continuous Mixing of Solid Polymer Electrolyte via Solvent‐Free Extrusion With Automated Material Addition	11
Comparative evaluation of vat photopolymerization and steel tool molds on the performance of injection molded and overmolded tensile specimens	11
Enhancing mechanical properties of polycarbonate parts developed by fused filament fabrication using RSM‐TOPSIS hybrid approach	11
The effect of different forms of iron substances on the aging properties of carbon‐black filled natural rubber	11
Sequential Dual‐Curing via Michael Addition and Free Radical Polymerization for Wood Surface Densification	10
Preparation and characterization of polymer blend electrolyte membranes based on lithium acetate‐complexed carboxymethyl cellulose (CMC) and carboxymethyl chitosan (CMCh) blend	10
Utilization of cross‐correlation function for assessment of replication quality in ultrasonic embossing of microchannels on polymethyl methacrylate	10
Investigation on the properties of chemically treated flexible parts fabricated through material extrusion based additive manufacturing technology	10
Biomass‐based crosslinked composite anion exchange membranes using bacterial cellulose template towards enhanced ionic conductivity and alkaline stability	10
Preparation of high‐performance poly(butylene adipate‐co‐terephthalate)/thermoplastic starch compounds with epoxidized soybean oil as compatibilizer	10
Impact of the proportion between virgin and recycled polyethylene terephthalate (rPET) on induced microstructure and mechanical stiffness	10
Electrospun SiO2/polyimide materials based on the water‐soluble polyamiс acid salt PMDA‐ODA with an ultra‐low dielectric constant	10
Replication of large‐area microstructures by combining movable induction heating and roller hot embossing	10
Profile extrusion die design: A comparative study between elastic and inelastic fluids	10
Waste mask supported PES membranes for efficient separation of oil/water emulsion	10
Polydopamine coating on additive manufacturing‐based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation	10
Improvement of catheter tip morphology by mold material used for tip‐forming process	10
Biodegradable composites from poly(butylene adipate‐co‐terephthalate) with soybean protein isolate: Preparation, characterization, and performances	10
The effect of the vanillin‐derived Si‐containing compound on the curing behavior, thermal and mechanical properties of bismaleimide resins	10
Comparative study of the effect of cross‐linking degree on chitosan hydrogels synthesized with low and medium molecular weight chitosan	10
Fluid–structure‐interaction simulations of forming‐air impact thermoforming	10
Influence of selected contaminations and melt filtration on the properties of ABS and ABS recyclate	10
Construction of a rough surface in EPDM/CB composite through peroxide curing: A mechanism for optimizing physico‐mechanical properties in automotive paint‐compati	10
Characterization, processing, and modeling of industrial recycled polyolefins	10
Low density polyethylene composites based on flax fibers modified by a combination of coupling agent	10
Mechanical and antimicrobial properties of green and photoactive AgTiO2/poly(3hydroxybutyrate) (PHB) electrospun membranes	10
Positron annihilation lifetime spectroscopic analysis of Nafion and graft‐type polymer electrolyte membranes for fuel cell application	10
Facile Fabrication of Multifunctional Responsive Biodegradable Fluorescent/Thermochromic Luminescent Fibers Based on Poly(Lactic Acid)	10
Multi‐objective optimization in roll‐to‐roll UV embossing for manufacturing linear Fresnel lenses	10
Innovative bioaerogels from marine waste and Nephelium lappaceum leaf extract: A multifunctional biomaterial for biomedical and cosmetics	10
Development of hydroxyapatite/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/gelatin composite nanofibers to improve bone‐forming cell proliferation and mineral deposition	10
Effect of process parameters on the performance of PA6 products fabricated by rotational molding	10
Preparation of PEO/PMMA nanocomposite based on functionalized graphene oxide as a solid polymer electrolyte film with high ionic conductivity: Statistical approach using response	10
Synthesis of aminopyrazine‐based fire resistant additive and its application in epoxy resin	10
Performance evaluation of room temperature vulcanized silicone rubber nanocomposites aged in strong aqueous solutions	10
Effect of amine‐reactive elastomer on the properties of poly(lactic acid) films obtained by solvent‐cast3Dprinting	10
Issue Information	9
A novelO‐carboxymethyl chitosan‐based hydrogel of an outstanding adsorption performance for removal of cationic Basic Red 12 dye from its aqueous solution	9
Mechanical and rheological properties of poly(lactic acid) toughened by bio‐based thermoplastic polyamide elastomer	9
Effect of polyethylene glycol on rheological, thermo‐mechanical, and tribological behavior of epoxy	9
Mechanical and thermal properties of polylactic acid blended with recycled polymethyl methacrylate	9
Adsorption of toxic organophosphorus pesticides from aqueous medium using dextrin‐graft‐poly(2‐acrylamido‐2‐methyl propane sulfonic acid‐co‐acrylic acid) copolymer: Studies on equilibrium kinet	9
Influences of reactive compatibilization on the structure and physical properties of blends based on thermotropic liquid crystalline polyester and poly(1,4‐cyclohexylenedimethylene terephthalate)	9
Preparation of mold temperature‐insensitive PP/LDPE foaming blends with lightweight and stable foaming performance	9
Scale‐up fabrication and advanced properties of recycled polyethylene terephthalate aerogels from plastic waste	9
A Comprehensive Review of Ultra‐High Performance Thermoplastic Nano and Multiscale Composites for Structural, Aerospace and Nuclear Applications: Recent Developments, Current Challenges, and Future Tr	9
Faster and greater moisture curing ethylene‐silane copolymers with good shelf stabilities	9
Understanding environmental stress cracking in the Bell Test at the notch region	9
Model of Stress–Strain Dependence for Poly(Vinyl Alcohol)‐Based Hydrogels	9
Processability and physico‐mechanical properties of ultrahigh‐molecular‐weight polyethylene using low‐molecular‐weight olefin wax	9
Silk nanofibrils/chitosan composite fibers with enhanced mechanical properties	9