Journal of the Textile Institute

Article	Citations
Effects of alkaline and atmospheric plasma treatments on mechanical properties and CO2 emissions of flax/polypropylene composites	88
Energy absorption of the Kevlar®/PP hybrid composite: fabric to composite optimization	31
Efficacy of mosquito repellent finishes on polyester fabrics using four essential oils against the vector of the West Nile virus, Culex pipiens (Diptera: Culicidae)	25
The three-dimensional laid-in knitting model based on sliver-plated yarns and electric heating performance simulation	25
Research on the PID series control system of a weft-insertion warp knitting machine based on kinematics	25
CFD and experimental studies on drag force of swimsuit fabric coated by silica nano particles	22
Performance properties of machine woven carpets produced from splittable microfilament pile yarns	21
Development of textile switch using conductive embroidery on pre-stretched fabric	20
Textile-based 3D printing and traditional Chinese geometric patterns for fashion textile development	18
Optimization of the projectile velocity in electromagnetic weft insertion system by genetic algorithm	18
Critical properties of cotton, UHMWPE, and para-aramid blended fabrics for protective clothing applications	18
Preparation and characterization of zeolite A-basalt fiber composite	16
A study of drag reduction with textile roughness on a cyclist model	16
Experimental study of low-velocity impact behavior and damage characteristics of flat-knitted spacer fabrics reinforced composites	15
Thiourea dioxide-mediated surface functionalization: A novel strategy for anti-felting and dyeability improvement of wool	15
Experimental and statistical analysis of flexural behavior of glass fiber reinforced polyester (GFRP) molded grating panels	15
Fastness and antibacterial properties of polypropylene surgical face masks dyed with coffee grounds	14
Predicting the bending rigidity and shearing stiffness of fabric based on three-dimensional drape model	14
Atmospheric pressure plasma deposition of silver nanoparticles on bark fabric for bacterial growth inhibition	13
Structure design and application of all-fiber-based capacitive sensor	13
Fabrication of Cu 2 O plated carbon fabrics via electrochemical deposition method	13
Pretreatment of granatum dye solution and its application in eco-dyeing of wool	13
Development of heat and moisture transfer model for predicting skin burn of firefighter in fire environments	12
Automatic 3D human body landmarks extraction and measurement based on mean curvature skeleton for tailoring	12
An experimental study on the effects of introducing carbon nanotube on low velocity impact behavior of carbon/aramid fiber reinforced intra-ply hybrid composites	12

Development of thermal liner for extreme heat protective clothing using aerogel technology	12
Construction and verification of dual-feed-opening rotor spinning unit merging effect model	12
Generating three-dimensional drape model based on projection and mesh deformation	12
Wet chemical method for highly flexible and conductive fabrics for smart textile applications	11
Doping cork fibers with nanomaterials for the removal of organo-phosphorous pesticide	11
A novel approach to produce neppy yarn in vortex spinning technology	11
Anti-bacterial nanofibers and their biomedical applications – a review	11
Regenerated cellulose woven fabric reinforced hydrogel composite	11
Influence of duoplasmatron ion source plasma treatment on multi-axial knitted structure reinforced glass fiber composites	10
Investigation of flexural and dynamic mechanical properties of bagasse fibre composite	10
Development of dual-core spun yarn using different fiber as a core by hamel twisting (elasto twist) technique and its impact on the denim fabric performance	10
The effect of mold shape on the warp-knitted fabric formability	10
Dyeing performance on polyester fibers and DFT investigation of newly synthesized 2-arylazo-dioxoisoindolinecyanoacetamide derivatives	9
Integrated textile material and production management in a fuzzy environment: A logistics perspective	9
Investigation on the sound absorption of cross-stitched fabric by airflow resistance and sound-induced vibration effects	9
Development of air purifying curtain using activated charcoal embedded multilayer fabric for effective indoor air filtration	9
Evaluation on dyeable, antibacterial and antioxidant properties of cotton fabric dyed with spent coffee grounds	9
Study on the sound absorption of jute fabrics: effects of woven factors and multilayer structures	9
Warp-knitted vamp fabric quality detection algorithm based on improved MatchNet	9
Meso-scale damage analysis of three-dimensional textile stitched composite subjected to compression loading	9
Pore size, shape and orientation analysis with respect to tensile tests in nonwoven spun-lace textiles using image processing	8
The advanced electrospinning and 3D platform for designing the personal protective masks	8
Machine learning based anomaly detection and diagnosis method of spinning equipment driven by spectrogram data	8
Development and characterization of impact resistant fabric with better comfort for motorbike riders	8
Influence of woven bandage composition on its elasticity and durability	8
A new method for measuring the static and dynamic fabric/garment drape using 3D printed mannequin	8
Oil adsorption properties of discarded yak hair	8
Jute nonwoven-based hybrid fabric for flexible and impermeable packaging	8
Investigation of the effects of some pile yarn parameters on crucial properties of towels	8
Functional performance of thin Ag, SS, and Ti films on retro-reflective fabrics	8
The mechanical properties of Kevlar three-dimensional angle-interlock fabrics and composites	8
Physicochemical investigation of the enhanced removal of methylene blue from aqueous solution using polydopamine/silver nanoparticles	7
The effect of size concentration, lubricant and plasticizer agents contents on cold sizing process performance of cotton warp yarns: modelling and optimization studies	7
The dyeing properties of alginate/lyocell blended fabric with reactive dyes	7
Textile multifilament biomaterials: surface modification by N 2 jet particle projection towards improved topography	7
Nomination and commentary on ‘An investigation of the physiological value of sorption heat in clothing assemblies, by Rodwell E. C., Renbourn E. T., Greenland J., & Kenchington K. W. L., Journal o	7
Dual desirability function and RSM approaches for modeling the ideal nonwoven cover bunch for protecting date fruit	7
Structural, optical and electrical properties of PANI/SnO2 nanocomposites (Part I – prior polyester blending)	7
Fashion style transfer: enhancing efficiency and aesthetic with a novel two-stage neural network	7
Investigating the effect of carbon nanotubes and graphene oxide on water/crude oil separation efficiency in polystyrene nanofiber membrane	7
Nomination and commentary on ‘Comparative thermophysiological tests on blankets made from wool and acrylic-fibre–cotton blends, by Umbach K. H., The Journal of the Textile Institute, 77:3, 212-222,198	7
Performance improvement of H-Shaped antenna with Zener diode for textile applications	7
‘Effect of yarn composition and fabric weave design on microwave and EMI shielding properties of hybrid woven fabrics’	7
Investigation of the effects of hollow yarn structure and woven fabric construction on fabric performance: mechanical properties	7
Artificial neural networks (ANNs) and response surface methodology (RSM) for optimizing wetting and anti-bacterial properties of woven fabric	7
Antibacterial and anticancer activity of poly (ɛ-caprolactone)/doxorubicin/ Costus arabicus L. root smoke composite nanofibers against lung cancer	7
Nomination and commentary on ‘Smart textiles: an overview of recent progress on chromic textiles, by Ramlow H., Andrade K. L. & Immich A. P. S., Journal of the Textile Institute, 112:1, 152-171, 2	7
Flexible textile-based electronic materials assembled with hybrid PEDOT: PSS doped with anionic surfactant	6
A study of the dielectric properties and resistance of polypyrrole/nylon composites	6
Fabrication of polyacrylonitrile/polypyrrole nanofibrous mat and its adsorption to the cationic yellow dye	6

Nomination and commentary on ‘The geometry and dimensional properties of plain-knit fabrics, by Munden D. L., Journal of the Textile Institute Transactions, 50:7, T448-T471, 1959, and published online	6
Effect of friction and tensile behaviour of the constituent yarns of three-layer fabrics, and cloth fit on the spike penetration	6
Fabricating anti-eczema, UV blocking and strong nanocomposite based on Achillea wilhelmsii C. Koch	6
Deposition of electrically-conductive polyaniline/ferrite nanoparticles onto the polypropylene nonwoven for the development of an electromagnetic interference shield material	6
Comparison of the effectiveness of textiles containing metal nanoparticle and metal-organic frameworks for protection against ultraviolet radiation: a systematic review and meta-analysis	6
Characterization of tensile creep behavior of fabric-reinforced PVC flexible composites	6
Fabrication and mechanical properties of braided flax fabric polylactic acid bio-composites	6
Vat dyeing of lyocell fabric with high temperature dyeing technique	6
Design and measurement of cost-balanced and electronic-efficient embroidered textile electrodes	6
Sound absorbing and thermal insulating properties of recycled cotton/polyester selvedge waste chemical bonded nonwovens	6
The cooling performance of forced air ventilation garments in a warm environment: the effect of clothing eyelet designs	5
The effect of collector parameters on nanofiber yarns produced by electro yarn spinning machine with conical collector	5
Flow field in micro-triangle of centrifugal composite spinning and the effect of slippage on PA composite nanofibers	5
Effectiveness of hybrid textile bars in tensile and bond stresses as an alternative to concrete reinforcement	5
Proliferation of mouse embryonic stem cells on substrate coated with intact silkworm sericin	5
Effect of incident angle of oblique-blowing airflow on yarn in pneumatic tucked-in selvedge apparatus	5
Decolorization of anthraquinone dye (Reactive Blue 4) in the microbial fuel cell by Baker’s yeast : process optimization	5
Design and evaluation of electrospun nylon 6/Zn-doped hydroxyapatite scaffold for lysozyme protein absorption	5
Fabrication of hydrophobic/oleophilic cotton fabric based on thiol–ene click reaction for oil/water separation	5
EVOH encapsulating blueberry anthocyanin dispersed in PVA nanofibers for real-time shrimp freshness monitoring based on pH-responsive colorimetric	5
Fabric material identification based on Densenet variant networks	5
Underwater in-situ plasma treatment of coarse wool fibers for scouring and bleaching	5
Understanding moderated mediating effects and framework towards Chinese element fashion consumption from a cultural perspective	5
General method to digitalize multi-layer woven structure	5
Application of additive manufacturing/3D printing on rehabilitation and healthcare: a systematic and citation network analysis review	5
Prediction of optical characteristics of thermochromic dyes on cotton fabrics at different temperatures and concentrations	5
Studies on the stab resistance and ergonomic comfort behaviour of multilayer STF-treated tri-component woven fabric and HPPE laminate composite material	5
Low-velocity impact and residual flexural properties of intraply hybrid laminates reinforced with glass and flexible fibers	5
Analytical model for the air permeability of parachute fabric and structure parameters sensitivity analysis	5
A review on natural fibre-based engineered flexible composite: a futuristic development as leather alternative	5
Bioprospecting Hypoxylon fendleri for pigment production and assessment of its dyeing efficacy on silk fabric	5
A novel method for detecting polypropylene fibers in cotton yarns based on thermal properties and IR image processing	5
Optimising the manufacturing of electrospun nanofibrous structures for textile applications: a machine learning approach	5
Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric	5
Research on wear characteristics induced by flowing microparticles in rotor cup	5
Long-term permeability tests on clogging and permeability of nonwoven geotextile filtering silty clay	5
Evaluating fabric smoothness appearance by a mechanical test system for fabric shape retention	5
Ultrasonic-assisted antimicrobial functionalization of cotton knitwear with plant extracts	5
Determination of various fabric defects using different machine learning techniques	5
Patient-specific medical compression stockings (MCSs) development based on mathematic model and non-contact 3D body scanning	5
Layered nonwoven filter embodied with packing density gradient measured by X-ray computed tomography for enhanced filtration performance	5
Smart coating textiles for visible and infrared camouflage with photochromism and tunable emissivity	5
Nonwoven from recycled polyester fibers for thermal insulation applications	5
Developing a metaheuristic model for the general assembly line balancing optimization based on a new workforce performance index: a case study in the garment industry	5
Mechanical properties and hairiness characterizations of compact-spinning cotton yarn in warp-knitting processing	5
Effect of ozone washing on the antibacterial property of hemp yarn	5
Process–Structure–Property relationship of roping in meltblown nonwovens	5
Application of electro-spun nano-fibers based on agriculture cellulosic biomaterial wastes for removal of dye and heavy metal from polluted water	5
Constructing principles of compound weave structures by digital design papers	5
Ballistic penetration simulation of a 3D woven fabric using high strain-rate dependent yarn model	5
Effect of a novel press washing mode on appearance and mechanical properties of silk garments: comparison with hand washing and front-loading machine washing	5
Microstructure and mechanical behaviors of engineered cementitious composites with high-volume fly ash	5
Forced wetting of hydrophobic flocked pile fabrics	4
Effect of pre-twist in the spinning triangle on yarn strength	4
Hybrid processing of melt electrospinning/blowing for polypropylene/polyethylene glycol fiber fabrication with various diameter distribution	4
Mathematical modeling of dynamic yarn input tension on circular weft knitting machine with positive storage feeding	4
Effect of quilting pitch and sewing thread type on the fragment protective performance of para-aramid fabrics used in military body armour	4
Analysis of material variation in the design of knitted sportswear compression stockings to escort thermo-physiological comfort using linear regression	4
Design of yarn tension self-adaptive control system on warp knitting machine	4
A generalised geometric model for the determination of shear angle during the bias-extension test	4
Research on oil adsorption properties of yak hair felt and its application	4
Effect of fabric properties on microfiber shedding from synthetic textiles	4
Nomination and commentary on ‘Note on the compressibility of wool, by Van Wyk C.M., Journal of the Textile Institute, Transactions, 37:12, T285–T292, 1946, and published online on 05 Dec 2008. https:/	4
Inks for digital printing of textiles	4
Editorial	4
Classifying fabric wrinkle via regularized random vector function link optimized by African vultures optimization algorithm	4
Decolorization potential of reactive dyes by using galvanising industry’s waste (aluminum hydroxide sludge) depending on dye chromophore	4
Preparation and characterization of high-performance water-based graphene dispersions for conductive coating on textiles	4
Defining textile technology as a scientific discipline: a historical perspective	4
Microstructure and particle filtration behavior of multimodal filter media made of fibers of different shapes for automotive engine intake application	4
The impact of Government Policies on the Australian textile industry 1850 to 2019	4
Preparation and characterization of the advanced alginate-based nanofibrous nonwoven using EDC/NHS coupling agent by electrospinning	4
Predicting the mechanical behavior of a polypropylene-based nonwoven using 3D microstructural simulation	4
Dynamic assessment of the crease recovery of fabrics by laser triangulation technique in terms of creasing repetition and soaking and drying	4
Internal friction properties of carboxylated cellulose nanofibers (CNF-C) modified aramid woven fabrics	4
Conductive and sensing performance of polypyrrole composited elastic filaments by template synthesis	4
A review of emerging bio-based constituents for natural fiber polymer composites	4
Unraveling electromagnetic shielding potential: exploring carbon and stainless-steel Weft knitted fabrics	4
Non-thermal, atmosphere pressure and roll-to-roll plasma treatment for improving the surface characteristics and antistatic solution absorption in polyester fabrics	4
Fabric- and film-structured supercapacitor	4

Reducing waste in garment factories by intelligent planning of optimal cutting orders	4
Fiber reinforcement of polymer hybrid sandwich composites using SNiPs: effect of silica nanoparticles on flexural and compressive strength	4
New effective ways of polypropylene and polylactide nonwovens functionalization	4
Flexible electrospinning pressure sensing film with wide pressure detection range and high sensitivity	4
Nonwoven composite endowed with electromagnetic shielding performance by graphene nanosheets adherence	4
Influence of airflow resistance on acoustic behaviour of needle-punched nonwoven structures	4
Structural properties and diameter prediction of fine denier polyester fiber based on machine learning algorithms	4
Effect of zinc oxide on piezoelectric properties of polyvinilidyn floride/polydiacetylen/zinc oxide electrospun composite nanofibers	4
Uniaxial tensile response of basalt fiber with different structures reinforced fine-grained concrete via acoustic emission monitoring	4
Nomination and commentary on ‘The yarn twist inside the rotor in open-end spinning, by Cormack D., Grosberg P., & Ho K. H., Journal of the Textile Institute, 70:9, 380-384, 1979, and published onl	4
Analysis of antiviral and antimicrobial activity of Opuntia Stricta (red prickly pear) extract treated cotton fabric by cationization technique for healthcare and hygien	4
Nomination and commentary on ‘A theory of the stress-strain properties of continuous-filament yarns, by Treloar, L. R. G., & Riding, G., Journal of the Textile Institute Transactions, 54:4, T156-T	4
Interfacial modification to improve the mechanical performance of basalt fiber/epoxy 3D woven composites	4
High efficient flame retardant finishing of PET fabric using eco-friendly DOPO	4
A facile approach to develop multifunctional cotton fabrics with hydrophobic, self-cleaning and UV protection properties using ZnO particles and fluorocarbon	3
Productivity optimization for intarsia single-bed flat knitting machine using genetic algorithm	3
Preparation and research of flexible graphene/polyvinylidene fluoride electric heating membrane	3
Humidity sensing behavior of Cr-PET (polyester) fiber-doped ZnO nanostructures	3
Sensory attributes of knitted fabrics intended for next-to-skin clothing	3
Examination of laser radiation effect on silk fabrics dyed with different concentrations of cochineal using iron and alum mordants	3
Impact of the Belt and Road Initiative on the United States’ textiles and clothing imports from Asian countries: Evaluating the significance of Chinese aid and ACFTA	3
Firm performance under the COVID-19 pandemic: The case of the U.S. textile and apparel industry	3
Effects of stabilising overfeed on the properties of draw textured polyester yarns	3
Valorisation of sodium lignosulfonate from wood pulping industries for the enhancement of moisture management properties of nylon fabric	3
Synthesis and characterization of nanofiber of gelatin, polyvinyl alcohol, and chitosan for wound dressing application	3
DeFNet: deconstructed strategy for multi-step fabric folding tasks	3
Military customized fabric hyperbaric chamber - design and safety aspects	3
Studies on the effect of process parameters on the thermal protective performance of multilayer thermal protective clothing	3
A cotton waste reinforced composite for automotive applications: development and thermal characterization	3
Optimum design of stenter machine hot air supply chamber by coupling CFD & DOE	3
A study on generating the perspective projection of different weave structures using 3D computer-aided designing tools	3
An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites	3
Fabric hand research translates senses into numbers – a review	3
Comparative evaluation of some comfort properties of denim fabrics including dual-core yarns containing wool and elastane yarn	3
Research on dyeing and physical properties of PAN submicron electrospinning composite yarns	3
Analyzing the dyeing behaviour of easy dyeable and regular polyester by the influence of different heat-setting temperature	3
Needle penetration forces into textile prostheses and skin: experimental study	3
Design and investigation of impact and micro hardness properties of the developed glass-jute-CGS fibre reinforced hybrid epoxy polymer composites	3
Multifunctionalization of self-assembled silver nanoparticle coated poly(ethyleneimine)/poly(diallyldimethylammonium chloride) modified silk fabric	3
Research on sliver detection based on microwave resonant cavity perturbation principle	3
Thermo-physiological comfort properties of various shirt fabrics treated with conventional and nano sized water-oil repellent and wrinkle resistant agents	3
Typha fiber reinforced polyester composites: tensile properties and statistical analysis	3
Evaluation of the effect of structural parameters on the compression behaviour of woven spacer fabrics	3
A facile method to fabricate superhydrophobic cotton fabrics finished using water-proof and antibacterial agent	3
Textile-based quad-band electromagnetic absorber design for wearable applications	3
Artificial neural network models for predicting breaking strength and abrasion resistance properties of woven fabrics with different chenille yarns	3
Modeling the flexural rigidity of spunlace nonwoven fabrics	3
Silicone decorated polycaprolactone electrospun fibrous membranes for oil/water separation	3
Engineering the comfort parameters of 100% cotton plain woven fabrics	3
Streamline video-based automatic fabric pattern recognition using Bayesian-optimized convolutional neural network	3
Electromagnetic shielding composite materials for packaging materials can be mass-produced by nonwoven technology and thermal adhesive technology	3
Colour as an indicator for stabilization of polyacrylonitrile fibres	3
Negative Poisson’s ratio weft knitted continuous filament PP fabric/epoxy resin composites with different loop lengths under impact loading	3
Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization	3
Objective rating method for fabric pilling based on LSNet network	3
Acid and alkali chemical treatments on synthetic and natural cellulosic, fibroin and keratin-based fabrics: study of structural changes	3
Effect of temperature and relative humidity on the moisture recovery and specific resistance of yak hair fiber	3
A dynamic virtual try-on simulation framework for speed skating suits	3
Finite-element analysis on the compression-recovery process of cotton fiber assembly	3
Plant dye-based sensors for monitoring of wound status	3
Effect of stabilising overfeed of draw textured yarns on woven fabric properties	3
Study on the formability of self-bonded bulk porous activated carbon	3
Effect of process parameters on mechanical properties of mesta (Hibiscus cannabinus) adhesive-bonded nonwoven	3
The morphology and thermo-regulating properties of electrospun PVA/PEG/Ag nanofibers of water and formic acid solvents	3
Study of mechanical properties of optimised ceramic/glass fibre needle-punched nonwoven fabrics part II: stitch bonding technique	3
PTFE emulsion treatment of polyimide/superfine glass fiber needle-punched complex filters	3
Ca2+ crosslinking sodium alginate/graphene oxide composite fiber with enhanced mechanical strength and fire retardancy	3
Preparation and properties research of spunlaced cellulose acetate/polylactic acid mask base cloth	3
Reversible thermo-chromic polyvinilidyn floride/polydiacetylene/zinc oxide composite nanofibers	3
Revival of cultural textile arts: creation of innovative weaving technology for fabricating traditional Chinese non-fixed four-warp leno	3
Mobile 3D body scanning applications: a review of contact-free AI body measuring solutions for apparel	3
Construction of a full color gamut color mixture model and a color prediction neural network model for rotor spinning melange yarn	3
Post treatment and properties of PVA/SS composite nanofibers	3
Influence of smart textiles on the thermal protection performance of firefighters’ clothing: a review	3
Comparing the cost-effectiveness and yarn quality improvement with PVA versus conventional maize starch as the sizing agents	3
Adaptive neuro-fuzzy inference systems (ANFIS) and artificial neural networks (ANNs) for optimizing electrospun PVA/TIO 2 fiber diameter	3
Investigation of EMI and UV-IR shielding properties of Kevlar and polyester/elastane nanocomposite fabrics coated by ECR and evaporation methods	3
Determining deposits on knit fabrics, yarns, and fibers, from sensor-related treatments	3
New dispersions for pigment printing binders in the manufacture of light industry goods	3
Investigation of the effect of pique weave on auxetic performance and related fabric properties	3
Anthraquinone of Pleurotus ostreatus as a bioactive and antimicrobial agent for finishing of textiles as a health care product	3
Numerical investigation into the effect of geometric shape of slot on air flow field in melt-blown for polymer fiber	3
Standardization and optimization of concentration of different mordants on the dyeing efficiency of Lawsonia inermis (Henna) on silk fibre	3
A benchmark study of the material models for forming simulation of woven fabrics	3
A novel method for reducing yarn hairiness with dynamic and static friction rollers on the yarn guide	3
Artificial aging test method for the assessment of changes in properties of architectural membranes and membrane connections	2
Interlaminar, free vibration, HDT and water absorption properties of braided flax woven fabric PLA biocomposites	2
Design of woven meta-materials for electronic textiles for functional applications	2
Numerical simulation of fabric cold pad-batch winding and quality assessment of fabric in roll	2
The simulation of mechanical responses of nonwoven fabrics using an improved meshless discrete algorithm	2
Simulation of airflow in the condensing zone of a modified compact spinning device and analysis of its yarn properties	2
The formation of silver nanoparticles in solutions of sodium salts of carboxymethyl starch	2
Estimation of raw silk quality using rough set theory	2
Modeling tensile behavior of 3D orthogonal woven green composites considering variability of natural fibers	2
TiO 2 /rough surface of woven cotton fabrics prepared by spin coating for antibacterial and self-cleaning processes	2