Textile Research Journal

Article	Citations
Investigating the effects of cognitive scenarios between real fabric and fabric visual representations	48
Modeling of the cyclic visco-elasto-plastic one-dimensional behavior of polyamide-based woven straps	42
Robot end effector based on electrostatic adsorption for manipulating garment fabrics	41
Construction of a novel hydrogel composite with polylactic acid nonwoven fibers: rapid and effective removal of Pb(II) and Ni(II)	40
Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment	39
Numerical simulation and tension regulation of yarn mechanics on warp knitting machines	37
Unsupervised defect detection algorithm for printed fabrics using content-based image retrieval techniques	36
Diffusion coefficient for diffusion of time-varying surface concentration by the film-roll method	36
Structure and characterization of carbonized cotton knitted fabric	31
Finite-element simulation of functional knee sleeves based on three-dimensional modeling of the knee joint	27
Multi-objective optimization of weight reduction process parameters of micropolyester woven fabrics using Taguchi gray relational analysis	26
Experimental and theoretical investigation of water-jet triboelectric charging of meltblown nonwoven fabrics	25
Construction of color solid by gridded color mixing of nine primary colored fibers and spinning of full color gamut yarn	24
The study of needle type influence on woven fabric surface area during the sewing process	24
Optimized design of sports bras with pressure comfort, thermal comfort, and shaping support	23
Research of textile logarithmic-aperiodic antennas with a matching circuit for textronics applications	20
Estimating the elastic modulus of unidirectional over-braided multilayer composites	20
Effect of the solvent evaporation rate of silver ink on the electrohydrodynamic-printing formability of textile-based printing electronics	20
Study of the optimization of embroidery design parameters for the Technical Embroidery Machine: derivation of the correlation between thread consumption and electrical resistance	20
Enhanced broadband sound absorption of multi-layer composite material based on three-dimensional warp-knitted spacer fabric	18
Finite element analysis of the tensile strength of laminated fabric for automotive seat covers	18
Effect of base fabric and raising cycles on mechanical properties, subjective hands and preference of ultra-fine fiber suede	18
Low infrared emissivity composite materials for multi-band camouflage	17
Knowledge-enhanced contour detection method for measuring slub yarn parameters	17
Creation of new textile utilizing Nishijin’s hikibaku technique and exploring new applications in other industries	17

Foam dyeing: A review of its potential to reshape sustainable textile processing	17
Synthesis of epoxy resin-based aqueous polyurethane and application to polyester-cotton fabric finishing	16
A precise method of color space conversion in the digital printing process based on PSO-DBN	16
Optimized combined spectral calibration model based on single-constant Kubelka–Munk theory for color prediction of pre-colored cotton fiber blends	16
Different assembled nano-MnO2 fiber supercapacitors applied for smart wearable clothing	16
A fiber recognition framework based on multi-head attention mechanism	16
Antimicrobial behavior, low-stress mechanical properties, and comfort of knitted fabrics made from poly (hydroxybutyrate-co-hydroxyvalerate)/polylactide acid filaments and cotton yarns	15
Toward a sustainable transition in automated production: enabling the vision-based approach and synchronous control for textile surface inspection systems	15
Optimization design of functional running pants and evaluation of thermal-humid comfort capabilities	14
Chemical recycling of hemp waste textiles via the ionic liquid based dry-jet-wet spinning technology	14
Comfort properties of special clothes worn by sufferers from atopic dermatitis	14
The quality comparison of open-end rotor-spun yarns produced from cotton waste in gray state and after dyeing	14
Quantification of fabric morphology and prediction of drag crisis based on the fractal dimension	14
An improved dynamic model and numerical simulation of yarn in the ring spinning system	13
Textile laundering and body odor: a comprehensive review	13
The application of 3D printing technology for developing a lumbar support garment for obese women	13
Comparative analysis on friction fields derived from different bottom pins in the drafting system of ring spinning and their effects on yarn properties	13
A novel objective fabric pilling evaluation method based on the photometric stereo algorithm	13
Prediction method of carding process production quality based on digital twin technology	12
Analysis of segmented elderly women’s lower bodies using 3D-LOOK scan data and virtual representation	12
Structural design of single functional jersey with moisture comfort based on yarn combination	12
Novel germanium-polyamide6 fibers with negative air ions release and far-infrared radiation as well as antibacterial property	12
Mordant-free dyeing of nylon fabric with mahogany (Swietenia mahagoni) seed pods: A cleaner approach of synthetic fabric coloration	12
A study on the shaping efficacy grading model of underbust corsets based on three-dimensional body scanning	12
Forced wetting of hydrophobic knitted fabrics analyzed with X-ray imaging	12
Connecting surface-mounted electronic elements with amber strand metal-clad conductive fibers by reflow soldering	12
A new parametric 3D human body modeling approach by using key position labeling and body parts segmentation	12
Optimized division algorithm applied to the pattern design of the segment filling insertion technique	12
Herbal synthesis of silver nanoparticles for improved dyeing and UV protection of cotton fabric	12
The coupling effects of seawater aging and fatigue micro-crack on mechanical degradation of carbon fiber/epoxy plain woven composites	12
Numerical simulation for electric field intensity and jet space of the quadratic spiral spinneret with auxiliary electrode	12
A new approach to the assessment of changes in air permeability, waterproofness, surface, and thermal properties of polyamide 6.6 fabric with polyurethane coating after washing	12
Effect of knitting structure and dyeing process on drying time, air and vapor permeability	11
Shape memory surface adhesion control based on PU-CNC/PS electrospun composite films	11
Identification and counting of the reeling cocoon number per thread for the automatic silk reeling machine	11
Dynamic behavior analysis of the winding system during filament reversing pushed by the traverse mechanism	11
Novel composite yarn with a wavy-network structure produced by various delivery speed ratios and untwisting factors	11
Antibacterial activity and sustained release properties of curcumin-loaded chitosan microspheres/nanofiber composites membranes for wound healing applications	11
Stiffness in compression therapy: Analytical estimation of pressure changes beneath textile compression devices	11
Development of yarns from recycled carbon fiber based on friction spinning technology with specific properties for thermoset composites	11
Development of multi-material hybrid yarns consisting of steel, glass and polypropylene filaments for fiber hybrid composites	10
Multi-dimension feature analyses for low-liquor ratio yarn bobbin dyeing combining mass transfer modeling	10
Printing performances of a new nitrogen-free urea substitute in silk printing of reactive dyes	10
A method for approximating weave diagrams under heald frame constraint	10
Zero-defect manufacturing in the textile industry: a review of current advances and challenges	10
Filtration efficiency and differential pressure of fabrics used in non-medical masks based on SARS COVID-19 particle size	10
Thermal resistance prediction of aerogel fabrics after repeated washing based on small-sample data	10
Effects of structural parameters on air consumption and mechanical energy characteristics of airflow in the vortex spinning nozzle	10
An intelligent generative method of fashion design combining attribute knowledge and Stable Diffusion Model	10
Morphology and properties of filter paper prepared by highly fibrillated poly(p-phenylene benzobisoxazole) fiber	10

Anti-microbial and methylene blue dye adsorption properties of cotton fabrics modified with TiO2, Fe, Ag-doped TiO2, and graphene oxide nanomaterials	10
Structural modeling and simulation of industrial flat and cylindrical axial weft-knitted fabrics	10
A sustainable desizing process for PVA-sized cotton fabric using ultraviolet C	10
Prediction of optimum alkaline hydrolysis conditions for imparting superhydrophobicity to large-area fabrics using three-dimensional modeling	10
FE modeling of woven fabric at the fiber bundle level under ballistic impact	10
Symmetrical circulation gradient color system construction and gradient color yarn spun by a three-channel numerical control spinning system	9
Heat and sweat regulating performance of zoning structure weft-knitted sportswear	9
Effects of ambient temperature step changes on the heat storage and release in thermal protective clothing	9
Wireless transmission of patient sensor data using smart textiles	9
Counter-plying of two-ply yarn: inner structure changes and external response	9
β-Cyclodextrin: Disperse yellow 211 complexes improve coloristic intensity of polyamide dyed knits	9
The prediction of loss tangent of sewed multilayer fabric	9
Development and analysis of a three-dimensional braided honeycomb structure	9
Enhancing heat protection performance of firefighters’ protective clothing: A comparative analysis of fabric and knit structure in the lining of multi-layered construction	9
Diffusion coefficient calculated by time-lag using the film-roll method	9
The investigation of flame-retardant fiber mats for high performance composites: flame retardancy and structure performance	9
Research into the thermal expansion behavior of spread tow woven pierced carbon/carbon composites at high temperature	9
Effect of dodecyl dimethyl benzyl ammonium chloride on dyeing kinetics and thermodynamics of spandex fibers dyed with acid dye	9
Textile-based wearable device for detection of date rape drugs in drinks	9
Preparation, properties and environment-friendly dyeing application of reactive brilliant blue dye based on triphenodioxazine chromophore	9
Effect of waist ease distribution on aesthetic fit	9
Research status of simulation modeling technology for the 3D braiding process	9
Light transmission of weft-knitted fabrics for seamless garments	8
Theoretical and experimental study on the formation mechanism of fiber bundle hooks in the combing process	8
Application of image processing technology on testing blending ratio and blending irregularity of blended yarns	8
Categorization of different types of people based on their electroneurophysiological responses to fabric–skin contact	8
Analysis of the influence of post-processing parameters on the curling phenomenon of knitted fabrics using pixel images	8
Measuring the impact of ginning stages on cotton fiber quality in the context of west and central Africa	8
Effect of crossing warp architecture on tear strength of 3D orthogonal woven T-shaped reinforcements	8
Image analysis to evaluate removal of particles from fabric surface	8
Comparison of the airflow characteristics and yarn properties between conventional and dual-feed-opening rotor spinning units	8
Simulation design and experimental study of beveled angle narrow-slit needleless electrospinning spinneret	8
Three-lead in vivo measurement method for determining the skin-electrode impedance of textile electrodes	8
Integrating artificial intelligence for optimal thermal comfort: A design approach for electric heating textiles aligned with user preferences	8
Structure–property relationship of melt spinning polypropylene fibers containing inorganic particulate CaCO3 fillers	8
Investigation of the moisture transfer ability and thermal comfort properties of single-layer cotton/polyester interwoven fabrics	8
Effects of washing on the mechanical properties of medical compression stockings	8
Recent advances of preparing structure-enhanced conductive yarns to control their performance in potential applications	8
Substrate effect and structure optimization of fabric-based circularly polarized dipole antenna for radio frequency energy harvesting	8
Effect of underwater flexibility of a soiled cloth on the detergency of automatic washing machines	8
Evaluation of some physical performance properties of ultrasonic seaming, conventional seaming and sealing adhesive tape on waterproof polyester knitted fabrics with polyurethane	8
Isometric fiber distribution in the roller drafting zone	8
TAIL: A deep learning framework enhancing fabric hand evaluation through multimodal data fusion	8
Improved fiber orientation measurement in nonwovens with corner removal	8
Viscoelastic tensile model of core/wrapped composite yarn with double filament	8
Effect of dyebath alkali in salt-free reactive dyeing of cotton to reduce effluent load	8
Analysis and evaluation of the thermal performance of combinations of suits and life jackets in water	8
Synthesis of poly(styrene-N-hydroxymethyl acrylamide) microspheres and their application in patterned photonic crystals	8
Thermal activation and dynamic mechanical characterization of glass-reinforced shape memory polymer composites for medical applications	7
Efficacy of absorbent textiles in managing post-voiding dribble in older men: a systematic review	7
Simulation of sliver blending and evaluation of blending irregularity	7
Numerical analyses of axial tension mechanisms of 3D orthogonal woven E-glass/epoxy composites with drilled holes	7
Extraction of textiles patterns regularities in Qing Dynasty court women’s Changyi based on grounded coding theory	7
Effect of weave structure and yarn fineness on the coolness and thermal-wet comfort properties of woven fabric	7
One-step preparation of dendritic δ -MnO 2 -enhanced activated carbon fiber loading for formaldehyde removal at room temperature	7
Effect of sodium hydroxide and acetone pretreatments on the adhesion of three-dimensional printed polylactic acid filaments on linen and polyester fabrics	7
Concave and convex small radius bending behavior of single and multiple layers reinforcement fabrics	7
Modeling of fabric sewing break detection based on U-Net network	7
Analysis of progress in research on technology for the detection and removal of foreign fibers	7
Hygrothermal aging behavior and flexural property of carbon fiber-reinforced polyethylene terephthalate glycol composites	7
Review of cloth modeling and simulation for virtual fitting	7
Geometric model of tufts based on the internal fiber configurations	7
Dye uptake prediction of Disperse Yellow 23 dye on PET fibers in supercritical carbon dioxide using neural networks	7
Reconstructing hyperspectral images of textiles from a single RGB image utilizing the multihead self-attention mechanism	7
Viscoelastic behavior of warp-knitted spacer fabrics in iterative compression and decompression	7
Motion comfort analysis of tight-fitting sportswear from multi-dimensions using intelligence systems	7
Classification of waste cotton from different countries using the near-infrared technique	7
Design and implementation of a wearable patch antenna that serves as a longitudinal strain sensor	7
Study on the microstructure characteristics, compression, and thermal insulation properties of duck down	7
Finite element modeling and simulation of yarn in winding process	7
A mesoscale tensile model for woven fabrics based on Timoshenko beam theory	7
Synthesis, recovery, and application of environmentally friendly disperse dyes with high light fastness	7
Evaluation of the influence of three-dimensional printing conditions on peel resistance and surface roughness of flexible polymer-textile composites	7
Hierarchical nanoengineered emulsion with robust adhesion enables superior self-cleaning cotton fabrics	7
Effects of Outer Shell Fabric Color, Smoke Contamination, and Washing on Heat Loss through Turnout Suit Systems	7
Improved cationic dyeability of thermotropic liquid crystal polyarylate fabrics by ultraviolet irradiation-induced grafting of acrylic acid	7
Simulation and experimental study on transverse nonlinear vibration of axially moving yarn	7
Influence of fineness, length and hollow section of fibers on acoustic absorption	7
Evaluation of the dyeability of hemp fabric with Anatolian black pine (Pinus nigra subsp. Pallassiana) and Scots pine (Pinus sylvestris L.)	7
Clothes retrieval based on ResNet and cluster triplet loss	7

Study on preparation and performance of multifunctional linen fabric finishing agent	7
Design optimization of a three-dimensional hexagonal braiding technique	7
Woven filter media used in wet filtration processes: investigation of pore size distribution, air and water permeability and finding correlations between them	7
CACFNet: Fabric defect detection via context-aware attention cascaded feedback network	7
Optical coherence tomography imaging can identify Merino lambs’ wool using automatic machine learning vision	7
Efficient fabric anomaly detection: A transfer learning framework with expedited training times	7
Brain signal changes of the amygdala cortex according to the physical performance of fabric	7
Uniaxial tensile strain correction of multi-axial warp-knitted fabric	7
Numerical and experimental analysis on anisotropic thermal conductivity of carding quartz fiber web based on the reconstruction model	7
Prediction of γ-ray shielding performance and study of Bi/PU coated fabric	6
Sustainable silk dyeing in a silicon non-aqueous dyeing system with Reactive Red 195: salt-free and less alkali	6
Structure modeling in three-dimensional simulation of weft-knitted seamless kneepads	6
Numerical study on thermal conductivities of spread tow woven pierced composites	6
Investigation of the influence of high molecular weight polyethylene and basalt content used in three-dimensional weft-knitted fabrics on the mechanical risks	6
Aramid filament/polyphenylene sulfide staple yarn fabric for pipe rehabilitation: hydrothermal aging and resin impregnation	6
Quantum chemistry calculation and experimental research on the component proportion of black disperse dye	6
Source strengths obtained with three clean air suits fulfilling the requirements for high performance in EN 13795-2:2019: An experimental study	6
Quantitative analysis of the relationship between the male body shape and block pattern based on the three-dimensional human model	6
Directional breaking strain of single-bar closed warp-knitted structures	6
Visual similarity simulation of slub denim based on image processing	6
Modeling and drafting process simulation of cotton slivers based on an octahedron structure	6
Numerical and experimental approach towards an energy-efficient compact spinning system	6
Enhancing hemp fiber performance: insights into chitosan treatment and structural evolution	6
Bio-degumming of ramie fiber using an integrated spiral symmetry stream anaerobic bioreactor	6
Enhancing two-way shape memory behavior of polycaprolactone nanofibers through aligned crystallization optimization	6
Stretchable three-dimensional tunable frequency selective fabric of U-shaped units and its electromagnetic response mechanism	6
A prediction method and its application for twist of slub yarn based on micro-element yarn	6
Preparing cationic dyeable polyamide 6 filaments by combining the masterbatch technique with melt copolymerization	6
Effect of magnetic lens on the electrospinning whipping instability, fiber diameter and its distribution	6
Tearing behaviors of polytetrafluoroethylene coated fabric under uniaxial in-plane tearing tests	6
Preparation of hygroscopic fabric with a uniform and slow exothermic effect and its thermoregulation evaluation	6
Double-faced shading effect digital jacquard fabric with a weft-backed and warp-wadded structure	6
Geometric simulation for warp-knitted tubular bandages with the mesh model	6
Sound absorption coefficient analysis and verification of weft-knitted spacer fabrics for noise reduction application	6
Synthesis and characteristic applications of silicon resins for the modifying agent in heat conduction	6
A sustainable strategy for preparation of flame-retardant cotton fabric by phosphorylation of recycled cotton	6
Knitting region segmentation and knitting parameter generation for three-dimensional model of socks	6
Preparation of multicolor microcapsules and their application in smart color-switching textiles	6
An efficient unsupervised approach for textile defect detection through unifying texture reconstruction and semantic localization	6
Effects of back panel design of outdoor backpack on human physiological and psychological response in a hot environment	6
Qualified nano-composite yarn for hydrophobic fabric via online nano- and micron-fiber composite spinning	6
Numerical analysis of dry heat transfer in textiles and clothing microclimate	6
Time-temperature-dependent mechanical durability analysis of short (glass) fiber-reinforced polyethylene terephthalate injection molding composites with weld line	6
Simulation of the dynamics of a flexible fiber in the swirling airflow in a nozzle containing cylindrical and divergent conical sections	6
Impact of lifters on velocity and residence time distributions of fabrics in a tumble dryer	6
Supine dynamic simulation and latex pillow design for Chinese women based on finite element method	6
Comfort properties of PLA/cotton multilayered quilted fabrics	5
Evaluating the fit-effectiveness of fabric-based reusable face masks on 3D printed NIOSH headforms	5
FocusDet: towards high-quality digital printing fabric defect detection	5
Systematic review of selecting comfortable sportswear: Predicting wearing comfort based on physiological responses and materials properties	5
Parallel web crawling for customer analytics	5
A study of the physical properties and bending stiffness of antistatic and antibacterial knitted fabrics	5
A study on the unwinding tension control of an elastic yarn	5
Effect of hybrid strategies on the ballistic response of aramid/ultra-high molecular weight polyethylene woven fabrics	5
Geotextile performance of fabrics woven by polyethylene terephthalate yarns prepared directly from drinking bottles	5
Improvement in dyeing and physical properties of wool fabrics through pretreatment based on the bacterial culture of Stenotrophomonas maltophilia DHHJ	5
Modeling the consumption of sewing thread for stitch class 301 through image analysis by using Fourier series	5
Rapid simulation of knitted fabrics based on a ribbon yarn model	5
Characterizing fabric shape retention by sequential image analysis	5
The effects of the support panel of compression leggings on the provision of low pressure for foot progression angle correction	5
Fabric defect detection based on low-rank decomposition with factor group-sparse regularizer	5
Optimization of fluid characteristics in the main nozzle of an air-jet loom	5
Calculation method of hosiery knitting parameters based on three-dimensional mesh sampling	5
Experimental research and numerical simulation of the relationship between yarn tension and multi-balloon shape	5
Analyses of micro-structure and mechanical behavior of polyester pre-oriented filament with dark color by adjusting linear density	5
Sound absorption performance of flexible polyurethane/silicon dioxide perforated coating composites	5
Application of viscoelastic-plastic model in blended yarn	5
Determination of the lignin content of flax fiber with the acetyl bromide-ultraviolet visible spectrophotometry method	5
Robust superhydrophobic cotton fabrics based on nano-silica particles hybrid epoxy resin: self-cleaning, anti-fouling, anti-abrasion and oil–water separation	5
Multi-response mixture design applied for the formulation of a textile green camouflage ink with reproduction of a leaf green	5
An improved algorithm for three-dimensional reconstruction of nonwoven microstructures by using multi-focus images	5
Electrical-mechanical behaviors of three-dimensional braided composites under three-point bending	5
Plasmonic silver nanoparticle-decorated electrospun nanofiber membrane for interfacial solar vapor generation	5
Scale-up fabrication of PVDF-HFP nanofibrous membrane with unique surface properties for efficient separation of oil from water	5
Self-assembled composite fabrics of lotus stem fiber with ultra-high liquid absorption properties	5
Wireless transmission of vital body data and ambient magnetic field with wearable IoT device attached smart textile	5
Automatic coloration of pattern based on color parsing of Sung porcelain	5
Physical relationship between resonant frequency and structure parameters of a normal mode helix dipole antenna for an ultra-high frequency radio frequency identification tag thread	5
Development of a real-time machine vision system for functional textile fabric defect detection using a deep YOLOv4 model	5
pH-Controlled bio-reduction of indigo with S. cerevisiae whole-cell biotransformation	5
A protein analysis-based method for authentication of human hair wigs	5
Waterless sterilization and cleaning of sheep wool fiber using supercritical carbon dioxide	5
Comparative analysis of the static adsorption of oil droplets and the dynamic absorption capacity of their aggregates by cotton, kapok, cattail and flax fibers	5
Analysis and measurement of the shape of spinning balloons	5
Preparation of multiple-reactive-site and flexible crosslinking agent with transaconitic acid and acrylic acid and its application for three-dimensional crosslinking of cellulose	5
Development of aldehyde and similar-to-aldehyde tanning agents	5
Transverse vibration characteristics and plane stress distribution of the carbon fiber prepreg tape subjected to nonuniform tension	5
Investigation of the oxidative self- polymerization of dopamine under alkaline conditions on wool fabrics	5
Novel materials for low-risk category personal protective clothing for industrial workwear used in hot workplace environments: improved thermal and moisture management attributes	5
A hollow carbonized kapok fiber/nano CoFe2O4 composite for broad bandwidth and enhanced microwave absorber	5
ViCo: Human visual perception-based contour extraction of Chinese Tang dynasty textile patterns	5
Pressure control algorithm of yarn precision winding based on proportional–integral–derivative ant colony optimization	5
Study on reactive dyeing in a sustainable nonaqueous medium dyeing system by X-ray electron spectroscopy	5
Level dyeing property and aggregation morphology of reactive black 5 on cotton fabric in a salt-free and less-water dyeing system	5
Modeling the temperatures of traveler and ring in ring spinning	5