Theoretical Foundations of Chemical Engineering

Article	Citations
Capillary Effect in the Layers of Rubber-Fabric Composites	32
An Overview of Strategies for Selecting the Optimal Sequence of Multi-Component Distillation	22
Estimating Expected Variability of the Quality of a Commercial Concentrate on a Processing Plant of a Mining and Processing Enterprise upon Variation in the Mixing Bin Volume	20
Chemical and Mineral Composition of Anorthosite (Karelia, Russia)	14
Heat-Pump Efficiency in Acetone-Methanol Extractive Distillation Depending on Feed Composition	13
Optimization Procedure for Conformance Control	13
Erratum to: Reliability of Nanofiltration Membrane Process for Brackish Water Treatment in Baghdad City: Module Modeling and Simulation	13
Analysis of the Separation Processes of Rare-Earth Elements in the Cascade of Mixing and Settle Extractors by Liquid–Liquid Chromatography Methods	12
Comparison of Algorithms and Results of Design and Verification Versions for Calculation of Chemical Technology Apparatuses	9
Heat and Mass Transfer when Heating and Drying a Spherical Body in Continuously Acting HF and Microwave Electromagnetic Fields	9
Mathematical Simulation and Optimization of Continuous Dihydrate–Semihydrate Production of Wet Process Phosphoric Acid From Low-Grade Ores	8
Studying the Dihydrate Stage of the Process of Preparation of Extractive Phosphoric Acid by the Dihydrate–Hemihydrate Method from Low-Grade Phosphorites	7
Extraction Purification of Concentrated Nickel Chloride–Sulfate Solutions from Impurities at AO Kola Mining and Metallurgical Company	7
Metalloporphyrins of Oil from the Severnoe Buzachi Oil Field: UV, IR, and EPR Studies	7
Study on Processing of Copper-Sulfide Concentrate	7
Processing of Caps and Fixing Rings of Plastic Bottles: A New Approach	6
Heat Exchange Equipment with Swirling Coolant Flows	6
Spodumene Pegmatites of the Tastyg Deposit as a Promising Source of Lithium	6
Nonstationary Mass Transfer of Nutrient Medium for Microorganisms in Mixed Gels	6
Combustion Characterization of Cooking Stove Based on Box–Behnken Response Surface Methodology	6
Doping of Lanthanum(III) Orthoborates and Metaborates with Europium(III) and Yttrium(III) Ions	5
Parametric Analysis of a Mathematical Model of a Catalytic Oscillator	5
Logical and Information Models of the Processes of Maintenance of Boiler Installations of Chemical and Technological Systems	5
Enhancement of Heat Transfer in a Tube Channel of a Tubular Heat Exchanger	5
Dynamics of Heat and Mass Transfer during the Injection of Dispersed Adsorbent into Steam-Gas Flow	5

Study of Kinetic Processes of the Dislocation of Iron-Containing Sulfates of Aggregated Ore	5
Studying the Process of Gold Leaching after the Oxidative Roasting of a Refractory Gold-Bearing Concentrate	5
Processing of Liquid Low-Level Radioactive Waste Using Cross-Flow Ultrafiltration at Mayak Production Plant	5
Theoretical Analysis of Reagent Filtration of Aqueous Suspensions with Unregulated Filtration Rate	5
Three-Dimensional Numerical Model of Ultrasonic Coagulation of PM2.5 Aerosol Particles in Vortex Acoustic Flows	4
Steam Reforming of Ethane in a Membrane Reactor with a Nickel Catalyst at High Temperatures	4
Antibacterial Copper–Titanium Oxide Coatings Obtained with the Extraction–Pyrolytic Method	4
Optimal Sequencing of Multicomponent Distillation Columns by Rigorous Calculation Methods	4
Injection of Superheated Water Vapor into a Porous Reservoir Saturated in the Initial State with Methane and Its Hydrate	4
Mathematical Description of the Process of Impact Interaction of a Flow of Catalyst Particles with a Breaking Element in a Cyclone Device with a Coaxial Arrangement of Purification Stages	4
Bioinspired Superhydrophobic Material with Nafion Polymer for Anti-Icing Coating on Aluminium Alloy Surface	4
Automating the Evaluation of the Efficiency of Averaging a Commercial Ore Concentrate	4
Development of an Enlarged Adsorber for the Processing of Productive Solutions	4
Mechanism of Degradation of Polymer Fuel Cell Cathode Catalyst: Research and Modeling	4
Study on Lithium Extraction from Salt Lake Brines	3
Decomposition of a Lean Yttrofluorite Concentrate by the Method of Sorption Conversion	3
Separation of an Industrial Mixture of Decalin or Naphthalene Fluorination Products. Purification of Perfluoro(7-methylbicyclo[4.3.0]nonane) from Close-Boiling Impurities by Heteroazeotropic Distillat	3
Continuous Technological Processes during Processing of SNF for a Closed Nuclear-Fuel Cycle	3
Thermodynamic Analysis of Liquid–Vapor Phase Equilibrium in Binary Systems with One Associating Component	3
Application of Artificial Neural Networks for the Analysis of Data on Liquid–Liquid Equilibrium in Three-Component Systems	3
On the Operation of Centrifugal Extractors in Liquid–Liquid Chromatography Mode	3
Physicochemical Processes in the Firing of Acid-Resistant Materials Based on Unenriched Kaolin and High-Alumina Ferrochrome Production Slag	3
Anticorrosion Hydroxyapatite-Containing Coatings for the Functionalization of Bioresorbable Magnesium Alloys	3
Computer Modeling of Hydrocarbon Fluid Flow in a Chemical Reactor with a Catalyst Layer	3
Influence of Internal Heat Exchange Conditions on the Process of Thermal Decomposition of Carbonates in Phosphorus-Containing Raw Materials	3
Theoretical Substantiation of Concentration Polarization in Electrochemical Baromembrane Processes for the Purification of Copper-Containing Solutions from Galvanic Plants	3
Effect of an Alkaline Etching Sludge on the Technical Parameters and Phase Composition of Composite Acid-Resistant Ceramic	3
Phase Equilibria in Water–Salt Systems Containing Sodium and Calcium Chlorides and Urea at Temperatures below 0°C	3
Principles of Chemical Engineering As a Basis for the Development of the International Concept of Best Available Techniques	3
Separation of an Industrial Mixture of Decalin or Naphthalene Fluorination Products. Physicochemical Foundations of Crystallization of Binary Mixtures of cis- and trans-Perfluorodecalin and Perfluorob	3
Flame Retardant Strategies and the Physical Barrier Effect of Nanoparticles to Improve the Thermal Performance of a Polymer	3
Surface Tension of Arsenic Acid Solutions	3
Erratum to: Ideal Multi-Component Separating Cascade	3
Theoretical and Experimental Studies of Formation of Anode Zones in a Cathodically Polarized Three-Dimensional Electrode of Carbon Fiber Material	3
Extraction of Rare-Earth Elements from Chloride Solutions in Multicomponent Systems using CYANEX 572	3
Synthesis of a Nitride-Containing Composite by Nitriding a Ferrosilicon–Shungite Mixture in a Combustion Mode	3
Aerobic Oxidation of Organosulfur Compounds in the Presence of Fe3O4 Nanoparticles	3
Improvement of the Integrated Processing of Lead-Containing Gas-Cleaning Products from the Nickel Production of JSC Kola MMC	3
Regularities of the Transition from a Bi–Te Metal System to a Bi2O3–TeO2 Oxide System upon Oxidation	3
Numerical Simulation of Taylor–Couette Flows with Rotating Outer Wall Using a Hybrid Spectral/Finite Element Method	3
Comparison of Calculation Results for the Mass Transfer in Spray Apparatus for the Regimes of Cocurrent and Countercurrent of Phases	3
Study on Catalytic Oxidation of Dimethylformamide by Sol-Gel Method	3
Absorption of Zirconium Tetrachloride by a KCl–AlCl3 Melt as Applied to the Extractive Distillation of Zirconium and Hafnium Tetrachlorides	3
Physical and Mechanical Properties of Modified Continuous Basalt Fiber for the Production of Polymer Composite Materials: Experimental Study	3
Modeling of Steam Propane Reforming in a Catalytic Membrane Reactor at High Temperatures	3
Chemical Destruction of Tokem-308 Cationite (Analog of KU-2x8) in the HNO3(vapor)–Air Atmosphere	3
Processing of Sludge Waste to Produce Ceramic Materials	3
Experimental Study of Physical Absorption of Gases at Low Concentrations with Different Solubilities	3
The Effect of Unsteadiness of Gas Flow in the Matrix Channel of a Rotating Heat Exchanger on its Thermal Parameters during Laminar Flow	3
Numerical Investigation of a Viscoplastic Fluid Bubble Removal: a New Correlation to Find the Degassing Process Parameters	3

Generalized Parameters of the Structure of Reinforced Plastics and Their Classification and Properties	3
Effect of Hydrophobicity on Talc Grinding in Attritor Mill	3
Analysis of Chemical Deposition in the Ca(OH)2–H3PO4–H2O System	2
Comparative Efficiency of Extraction Purification of Straight-Run Petroleum Fractions and Gas Oils of Secondary Oil-Refining Processes for Obtaining Marine Fuels	2
Experimental Study of the Chromatographic Extraction Process of Separation in a Closed Multistage Loop	2
Synthesis and Study of Double NaYP2O7 Phosphates Doped with Rare-Earth Elements	2
Effect of Hydrodynamic Conditions on Micromixing in Impinging-Jets Microreactors	2
Concentration Distribution of Molecules and Other Species in the Model System Fe–NaCl–Na2S–H2SO4–H2O at Various Temperatures of the Electrocoagulation Process	2
A Hybrid Membrane for the Simultaneous Selective Sorption of Cesium in the Ionic and Colloid Forms	2
Formation of Thiophene Derivatives and Destruction Kinetic Regularities during the Cracking Process of High-Sulfur Vacuum Gasoil Oxidation Products	2
Synthesis of a Nanocomposite Containing CTAB-stabilized Fe3O4 Magnetic Nanoparticles and a Comparison between the Adsorption Behavior of Cobalt ions on the Nanocomposite and Typha latifolia L.	2
Study of the Efficiency of Using an Electrochemical Module to Generate Ferrates while Treating Wastewater from Meat Processing Plants	2
Technology of Application of a Hardware and Software Complex Based on the PMR Relaxometry Method for Express Monitoring of Crude Oil Characteristics with Gas Analysis in an Explosive Zone	2
Removal of Reactive Yellow 145 Dye from Aqueous Solution by Photocatalytic and Sonocatalytic Degradation in the Presence of CuO Nanocatalyst	2
Processing Red Mud Produced at the Eti Alüminyum A.Ş. Seydişehir Alumina Refinery to Recover Gallium and Vanadium and Obtain Iron Oxide Pigments	2
Thermodynamic Aspects of the Use of Elementary Fluorine as the Fluorinating Agent	2
Basalt of Kanzafarova Open Pit Mine: Raw Material for Production of Mineral Fiber	2
Predicting the Electrochemical Pressure-Driven Membrane Separation of Industrial Solutions Using Friction Theory	2
Structural Features of B6S and B6Se Synthesized at High Pressure	2
Effect of Scale Deposits on the Temperature Regime in the Channels of Plate Heat Exchangers	2
Filter Replacement Modes for Respirators Protecting Workers from Exposure to Industrial Gases (Review)	2
Effect of Rehydration Conditions on the Physicochemical Properties of Reduced Layered Double Hydroxides of Magnesium and Aluminum	2
Computer Simulation of the Flow of Non-Newtonian Two-Phase media in Areas of Complex Geometry	2
Synthesis of Clinoptilolite Zeolite and Investigation the Influence of Various Factors on the Crystallization Process in Natural System Obsidian-Halloysite	2
Extractive Separation of Co/Ni Pair With the Deep Eutectic Solvent Aliquat 336/Timol	2
Computational and Theoretical Evaluation of the Effect of DIAZ-4 and DNT on the Thermodynamic Characteristics of Model Compositions Filled with Explosives of Reduced Vulnerability	2
Effect of the Environment on the Properties of Polymer Composite Materials	2
Intensification of the Process of Separation of Oil Emulsions by Exposure to Ultrasonic Radiation	2
Hydrodynamic Structure of Secondary Polymer Melt Flows in Channels with Changing Geometry	2
Measurement of Velocity Fields in a Machine with a Two-Blade Mixer via Digital Tracer Visualization	2
Study of the Dynamic Modes of the Operation of Flowsheets for the Extractive Distillation of a Benzene–Cyclohexane–Toluene Mixture	2
Use of Hyperbranched Nanocomplexes to Improve the Efficiency of Polymer Flooding	2
The Stability Analysis of a Chemical Process in a Flow Reactor	2
Liquid Holdup and Axial Mixing in a Mixed Bed of Hydrophobic Catalyst and Hydrophilic Packing	2
Influence of Temperature–Time Parameters and System Composition on Kinetics of Acetalization Reaction in Preparation of Polyvinyl Formal Foam from Polyvinyl Alcohol Solution	2
Sonochemical Treatment of Oil-Contaminated Wastewater	2
Production of Carbon Adsorbents from Hydrolysis Industry Waste and Methods for their Modification	2
Spontaneous Precipitation of Caffeine from Supercritical Extracts of Roasted Coffee Beans	2
Extractive Distillation of an Ethyl Acetate–Ethanol–Water Azeotropic Mixture in the Presence of Boric Acid Amino Ester	2
Effect of the Synthesis Conditions and Nature of Precursors on the Phase Composition of Zirconium and Sodium Phosphatosilicates (NASICON)	2
Multifunctional Coatings with Self-Healing Effect on Magnesium Alloy MA8	2
Analysis of Varieties of Modern Dispersing Equipment	2
Optimization of Performance and Emission Characteristics of Biodiesel from Non-Edible Raphanus sativus Oil with Nano-Additive	2
Predicting Biogas Production by Anaerobic Digestion of Organic Wastes through Kinetic Modeling	2
Analysis of the Deformation Behavior of Materials During Indentation Using Digital Image Processing Methods	2
Formation of Dust Particles in Process Multiphase Reactors	2
Accounting for Fluid Flow when Determining the Pressure Drop in Layers Separated by a Clayey Interlayer	2
Application of a First Principles Mathematical Model of a Mass-Transfer Technological Process to Improve the Accuracy of the Estimation of the End Product Quality	2
Physicochemical and Petrographic Studies of Perlite Rock Classified by Density	2
Modern Methods for Foaming of Glass and Silicate Raw Materials: Review and Analysis	2
Problems in the Development of Efficient Biotechnology for the Synthesis of Valuable Components from Microalgae Biomass	2
Study of the Antimicrobial Resistance of ZnO-Nanocoated Fabrics in Tropical Climates	2
Investigation on the Catalytic Performance of Clinoptilolite Exchanged with Various Metallic Ions for Toluene Removal	2
Theory of a Solid–Liquid Heterogeneous Reaction to Form a Gas Phase	2
On the Additivity of the Impact of Solar Spectrum Quanta Separately and after the Preliminary Proton Irradiation on the Optical Properties of a SiO2-Nanoparticle-Modified Barium Sulfate Powder	2
Influence of Saturation Temperature on Pressure Drop during Condensation of R-134a inside a Dimpled Tube: A Numerical Study	1
Change in the Redox Potential of Water in a Flow Plasma Reactor in a Cavitation Field and Generation of Active Oxygen Forms	1
A Study of the Pressure Effect on the Relative Volatility of the Components in the Distillation Process of Mixtures of Different Natures	1
Simulation of a Fuel Reactor for Chemical Looping Combustion with Oxygen Uncoupling	1
Humate Agents based on Oxidized Brown Coal in the Flotation Enrichment of Impregnated Copper–Nickel Ores	1
Mathematical Model of a Closed Water-Circulation System of Wastewater from Small-Scale Chemical Production	1
Synthesis and Properties of Catalytic Chemisorbents Based on Titanium Oxide	1
Mathematical Modeling and Simulation of Methane Steam Reforming Membrane Reactor	1
Numerical Study of Nonlinear Hydromechanical Aircraft Systems	1
Complexation of Europium(III) with Acetylacetone and Trialkylbenzylammonium in Extraction Systems According to Luminescent Spectroscopy Data	1
Adsorption Isotherm, Kinetics and Optimization Study by Box Behnken Design on Removal of Phenol from Coke Wastewater Using Banana Peel (Musa sp.) Biosorbent	1
State of the Art and Prospects for Studies of Structure Formation in Extraction Systems with Metal Compounds	1
Development and Prospect of Arsenic Removal Technology for Containing Arsenic Copper Minerals	1
Chemically Modifying Ice and Ice-Based Materials to Control Their Properties	1
Optimal Organization of Complex Processes in Chemical Engineering Using General Systems Theory	1
Interaction of Reactive Dyes with Tetraalkylammonium Halides in Aqueous Solutions	1
Effect of the Side-Stream Location and the Side-Stream Value on the Optimal Entrainer Flowrate in Thermally Coupled Extractive Distillation Columns	1
Study of the Viscosity of Arsenic Acid Solutions	1
Integration of Turboexpanders into Reactor Blocks of the Dehydrogenation of Processes of Light Alkanes	1
Extraction of Carboxylic Acids with Binary Extractants and Bifunctional Ionic Liquids	1
Recovery of Copper and Molybdenum from Waste Generated by Copper-Molybdenum Plants	1
Isotope Effects of Water in Liquid–Vapor Equilibria on Passing to Water–Non-Electrolyte Solvent	1
Synthesis of Pd(0)/C by Pyrolysis of the Cellulose–Saccharose–Palladium Nitrate Powder Composite	1
Improving the Efficiency of the Decomposition of the Aluminate Liquor by Preparing and Introducing an Active Seed into the Decomposition Process	1
New Hydrophobic Oil Sorbents Based on Silica Aerogels	1

Membrane Extraction of Ag(I), Co(II), Cu(II), Pb(II), and Zn(II) Ions with Di(2-Ethylhexyl)phosphoric Acid under Conditions of Electrodialysis with Metal Electrodeposition	1
Air Purification in a 3D Printer Environment	1
Statistical Processing of Field Data to Predict Additional Production after the Use of Conformance Control Technology	1
Comparison of Numerical Schemes for the Problem of Laminar Flow in a Suddenly Expanding Channel	1
Generalized Relationships for Calculating the Elements of Sets of Input Indicators of the Inlet Characteristics of a Fermentation Process for Lactic Acid Production	1
Extraction of Cu(II), Ni(II), and Al(III) with the Deep Eutectic Solvent D2EHPA/Menthol	1
Analytical Solution to the Equation for the Simplest Natural Circulation Loop of Working Fluid in a Steam Boiler	1
Mathematical Modeling of the Flow of Two-Phase Media in Disc Stack Separators with Curvilinear Discs	1
Oxidative Desulfurization of Diesel Fraction Using Catalysts Based on Transition Metal Oxides, Aluminum, and SBA-15	1
Stratiform Anorthosite Associations of Differentiated Basitic Massifs in Russia. Part 2. Genesis	1
Using Chelate Cationites for the Purification of a Lithium Chloride Solution	1
Photopolymer Coatings for the Optic Fiber Systems JSC	1
Solving the Inverse Problem for Chemical Reactions Occurring in a Plug-Flow Reactor	1
Analyzing the Efficiency of Using Different Chemical Compositions for Intensifying the Phytoextraction Processes of Mercury and Other Heavy Metals Based on Multivariate Image Tools	1
Nonparametric Logit Modeling for Electromembrane Extraction	1
Chemical Water Treatment for Improving Coil-Type Direct-Flow Steam Generators	1
Search for the Optimal Regime Parameters of a Catalytic Process Based on Evolutionary Computations	1
Statistical Regularities of Forming Porosity in Plane-Parallel Basalt-Plastic Composite Materials during Climatic Degradation and Forecasting Their Properties	1
Conversion of Light Hydrocarbons on Modified Zeolite Catalysts	1
The Effect of the Conditions of Extractive–Pyrolytic Synthesis on the Luminescence Characteristics of Inorganic Luminophores Based on Mixed Oxides of Rare-Earth and Rare Elements	1
Robustness Analysis of Chemical Coupling Network Based on Asymmetric Dependent Network Model	1
Topological and Physico-Chemical Analysis of Deposits on the Working Surfaces of Heat-Exchange Equipment	1
The Influence of the Separation Plate Angle on the Efficiency and Hydraulic Resistance of a Multivortex Separator	1
Granulated Metamaterial Cross-Linked Polyvinyl Alcohol-Magnetite for Use in Optical Micrometry	1
Purification of the Isopentane Fraction From Isopentenes in the Production of Isoprene	1
A Fractal Analysis of the Effect of Titanium Dioxides on the Biological Properties of Bioinorganic Composite Materials	1
Synthesis and Compaction of Zirconium Nitride with Use of Zirconium Oxide and Air Supply	1
Computer Simulation of Laser Radiation Influence at Internal Flows of Reactive Hydrocarbons	1
Prediction of Nanofiltration Purification of Industrial Solutions from Metal Ions Based on the Theories of Convective Diffusion and Hydrodynamics	1
Stratiform Anorthosite Associations of Differentiated Basitic Massifs in Russia. Part 1. Deposits and Mineral Composition	1
Influence of a Separation Grid on the Efficiency of Particulate Matter Capture in a Device with Arc-Shaped Elements	1
Nanofiller Effects on the Isothermal Curing Kinetics of Epoxy Resin	1
Modeling of Heat- and Mass-Transfer Processes during Convective Drying of Cotton Fabrics	1
A New Approach to Formulating Low-Viscosity Marine Fuels	1
Efficiency of Using Heat Pumps in the Extractive Rectification of an Allyl Alcohol–Allyl Acetate Mixture Depending on the Composition of the Feed. Part 2. Application of Heat Pumps in Column Complexes	1
Sol-Gel Powder Synthesis for Fabrication of Zircon-Based Ceramic Composites in a Two-Stage Microreactor	1
Integrated Processing of Gold-Containing Raw Materials Using a Mixture of Ammonium Bifluoride and Ammonium Sulfate	1
Efficiency of Heat Pumps in Extractive Rectification of the Allyl Alcohol–Allyl Acetate Mixture with Different Compositions of the Feed: Part 1. Application of Heat Pumps in Schemes with Two-Selection	1
Experimental Study of Hydrodynamics and Mass Transfer in Microchannels for Designing Microreactors and Microextractors	1
Heat and Mass Transfer in Spray Drying Processes with Convective-Radiant Energy Supply	1
Simulation of Purification of Lower Olefins in Pyrogas from Acetylene Hydrocarbons on Nickel Polymetallic Catalysts	1
Influence of Conditions of Microreactor Mixing of Reagent Solutions on the Formation and Photocatalytic Properties of BiVO4	1
Fuzzy Logic Algorithm of Ecological Forest Zoning in the Vicinity of Chemical Plants Based on a Hierarchical System of Fuzzy Composite Indices	1
A Review on Different Treatment Possibilities of Dairy Wastewater	1
Preparation of Zircon on the Basis of Raw Materials of the Kola Peninsula using Mechanical Activation	1
Mathematical Model and Modernization of the Process Flows of Methanol Extraction from Hydrocarbon Mixtures	1
Obtaining Tungsten, Titanium, and Molybdenum Powders during their Dispersion in Pulsed Discharges in Aqueous Solutions	1
Comparative Analysis of the Effect of HDPE and UHMWPE on the Properties of Nitrile Butadiene Rubber	1
Minimizing Specific Energy Consumption of System for the Allocation of Isoprene Based on the Step-by-Step Decomposition Method	1
Mechanochemical Processing Technology of Natural Materials for Plugging Oil Wells in Remedial and Isolation Operations	1
Random-Walk Method as Applied to the Description of Flow Patterns in Catalytic Packed-Bed Columns	1
Synthesis and Structural Study of Sodium Dodecyl Sulfate–Butanol-1–Kerosene–Aqueous Acid Solution Emulsions Suitable for the Chemical Polishing of Copper and Aluminum Surfaces	1
Preparation of Building Materials from Waste Aluminosilicate Rocks	1
Preparation of Titanium Dioxide from the Ammonium Hexafluorotitanate–Silicon Dioxide System	1
Reagent-Free Technology for Intensifying the Process of Growing Microgreens in Aquaponic Systems	1
Modern Approaches to Development of Flexible Pressure Swing Adsorption Units for Separation of Hydrogen-Containing Gaseous Mixtures	1
On Separation of Rare-Earth Metals in Cascade of Sieve Tray Extraction Columns in the Liquid–Liquid Chromatography Mode	1
Mathematical Description of the Reciprocating Compressor Taking Into Account the Influence of Suspension Parameters on Its Output Characteristics	1
Effect of Technological Parameters on the Formation of Igneous Rock Melts (for Gabbro Used As an Example)	1
Estimating the Ultimate Porosity of Basalt–Plastic Composites in Climatic Tests under Northern Conditions	1
Inhibition of Spontaneous Polymerization during the Synthesis of Epoxyacrylic Oligomer	1
Electrochemical Incineration of Synthetic Tannins Used in Retanning Processes	1
Calculation Algorithm of Volumes of Medium-Level Radioactive Wastes Solidified Into Cement or Magnesium–Potassium Phosphate (MPP) Matrix	1
Study of Reactions in the Na2MoO4–ZrOCl2–ErCl3–H2O System	1
Technology for Processing Composite Materials Based on Polylactide Using 3D Printing: Properties and Structure	1
Analysis of Features of Electrical Properties of Polymer Dielectrics	1
Oxide Films Produced by the Extraction–Pyrolytic Method with Different Transmission and Absorption Characteristics in the UV Range	1
Features of Methods to Produce High-Purity Arsenic	1
Decomposition of Mineral Raw Materials Using a Mixture of Ammonium Hydrodifluoride and Sulfate	1
Analysis of Extraction Separation and Chromatographic Separation in a Cascade of Mixer–Settler Extractors	1
Thermal Properties of Solutions in the H3AsO4–H2O System	1
Heat and Mass Transfer in the Drying of a Cylindrical Body in a Continuous Electromagnetic Field of High and Superhigh Frequency	1
Algorithm for Processing Data on the Thermophysical Properties of Phosphorites by Solving the Inverse-Coefficient Heat-Conduction Problem	1
Organization of Counter-Mixing of Ozone Flows and Aqueous Solutions	1
Kinetics of Ultrasonic Dissolution of Metal Oxide Powder for Different Spatial Combinations of the Cavitation Region and Eckart Acoustic Flow	1
The Influence of Laser Radiation on the Laminar Flow of a Chemically Active Gas–Dust Medium in a Narrow Circular Tube	0
Kinetics of Sulfuric Acid Decomposition of Nepheline	0
Theoretical Estimates of the Porosity of Raschig Rings in the Wall Region of a Packed Column	0
Porous Structure of Acetylene Black after Heat Treatment	0
Preparation of Mixed Uranium Oxide and Plutonium Powders Using a Thin-Film Rotary Apparatus	0
Integrated Technology for Processing of Apatite Concentrate	0
Pressure-Transient Analysis of Oil Wells after a Short-Term Disturbance of the Formation	0
Phase Equilibria in Sections of the Urea–Ethylene Glycol–Water System at Low Temperatures	0
Evolution of Mathematical Models of Non-stationary Heat (Mass) Conductivity Processes in Bodies of Canonical Form	0
Development of a Sorbent Based on Chitosan and Vermiculite for Textile Wastewater Treatment	0
Analysis of Variants of Reforming of a Part of the Fuel (on the Example of Propane) in a Mixture with Internal Combustion Engine Exhaust Gas to Add the Reformate to the Combustion Chamber	0
Interaction between REEs and Carbonate Ion	0
Physico-Chemical Study of Synthesized Nanocomposites Based on Organobentonite	0
Estimation of the Temperature of Single-Bubble Sonoluminescence in Various Liquids From Color Images	0
Study of the Phase Composition of a Ceramic Sample Based on Ferrodust and Clay at Different Annealing Temperatures	0
Gas Fermentation: A Game-Changing Technology from Molecular Engineering to Bioreactors, Modeling, and Optimizing Processes and Apparatuses	0
New Sulfoaluminate Matrices for Solidification of Radioactive Sodium Nitrate Concentrates	0
Preparation of Bismuth Ammonium Citrate	0
Extraction-Pyrolysis Synthesis and Luminescence Properties of Lanthanum–Cerium Phosphates Activated by Terbium	0
Theoretical Substantiation of the Mechanism of Ultrasonic Dehydration of Materials Without a Phase Transition of Liquid Into Vapor	0