Thin Solid Films

Article	Citations
Improvement of Cu and Zr doped Diamond-like carbon coatings on comprehensive performance of Ni-Ti alloy potentially used in braided vascular stent	55
Editorial Board	44
Exfoliation of self-assembled 2D aluminum synthesized via magnetron sputtering	38
Nickel thin films with bulk-like properties formed by the ion-beam sputtering – deposition cycles	37
Spray coating vs. immersion for self-assembly of gemini perfluorinated phosphonic acids on indium tin oxide	34
Characterization of deep interface states in SiO2/B-doped diamond using the transient photocapacitance method	33
Effects of hydrogen on trap neutralization in BaSi2 with interstitial silicon atoms	30
Editorial Board	29
Editorial Board	26
Effect of oxygen and nitrogen sensitization on structural, optical and electrical properties of PbSe thin films	26
Achieving tunable work function in MoO thin films: A key to low-cost, high-performance organic electronics	24
Relevance of linear and nonlinear optical properties of Erythrosine B thin films for photonic application	24
Correlation between sputtering method, microstructure and properties of TiOx thin films deposited by reactive direct-current and high-power impulse magnetron sputtering	24
Zinc oxide nanorods and nanotubes arrays grown on carbon fabric by microwave hydrothermal method for self-powered piezoelectric/triboelectric sensors	24
Morphological and mechanical characterization of chitosan/gelatin/silica-gentamicin/bioactive glass coatings on orthopaedic metallic implant materials	23
Characteristics of thin Sb2Se3 films obtained by the chemical molecular beam deposition method for thin-film solar cells	23
Atomic force microscopy and in situ-annealing X-ray diffraction study on template-stripped gold substrates for optimum self-assembled monolayer deposition	22
Strain rate and temperature dependence of collapse pressure in Langmuir monolayer of cholesteryl dimers	22
Optimizing antimony trisulfide thin films: enhanced structural and optoelectronic properties via post-annealing in sulfur atmosphere	22
Damp heat induced degradation mechanisms occurring in coloured oxide/metal/oxide films for thin-film solar cells	22
Influence of deposition pressure on microstructure, mechanical and electrical properties of niobium thin films	21
Towards Ge-based electronic devices: Increased longevity of alkanethiol-passivated Ge(100) in low humidity environments	21
CsPbBr3 perovskite thin films by magnetron sputtering: The role of the substrate on texture and morphology	21
Morphological and stoichiometric optimization of Cu2O thin films by deposition conditions and post-growth annealing	20
Corrosion behaviors of macro/micro/nano-scale surface modification on Ti-6Al-4V alloy for bio-implant	20

Oxygen flow rate effect on copper oxide thin films deposited by radio frequency magnetron sputtering	19
Effect of the alloying elements in TiN sublayer on the structure and mechanical properties of carbon coatings	19
Evaluation of the membrane performance of ultra-smooth silicon organic coatings depending on the process energy density	19
Modulation of the electrical characteristics on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)-based resistive random access memory device by the impact of top electrode materials	18
Transparent p-n heterojunction thin film diodes based on p-CuCrO2 and n-In2O3	18
Empowering TiO2:ZrO2 composite for energy storage through chemical beam vapor deposition	17
Improved thermoelectric power factor of multilayered poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and Cu2Se thin films	17
Growth instability of N-polar GaN on vicinal SiC substrate using plasma-assisted molecular beam epitaxy	17
Effects and modulation mechanism of crystal structure on residual stress of Cu films used for metallization	17
Epitaxial growth of pure Sr3Al2O6 sacrificial layer for high quality freestanding single-crystalline oxide membranes	17
Phosphating passivation layer for quantum dot sensitized solar cells	17
Structural and tribological properties of TiSiN films with different Si content	17
Low energy Ag ion irradiation-induced surface modification studies of Au-graphene oxide nanocomposite thin films	17
Precise quantification of the adhesion between metallic thin films and silicon wafer	16
Editorial Board	16
Fabrication of thin film for triple-cation perovskite via hot-bar-coating method without post-annealing process	16
High quality Mg(0001) films grown on Si(111)3×	16
Effects of growth temperature and reactor pressure on AlN thin film grown by metal-organic chemical vapor deposition	16
Editorial Board	16
Macro-scale phase purity and epitaxiality of pulse-laser-deposited Ga2O3 on c-plane sapphire	16
Editorial Board	15
Efficiency and color-temperature-stability improvements in exciplex-based phosphorescent organic light-emitting diodes with a quantum well structure	15
ICMCTF 2023 - International conference on metallurgical coatings and thin films - Preface	15
Editorial Board	15
Pulsed laser deposition preparation and laser-induced voltage signals of TiO2 thin films	15
Editorial Board	15
Zirconia-based coatings on mild steel fabricated by atmospheric-pressure plasma processing for corrosion protection	15
Editorial Board	15
Hillock formation in β-Sn films during high frequency cyclic bending at low strains	14
Atomistic simulations of improved thermal stability and strength of nanocrystalline copper films by alloying with Zr	14
The Thermodynamics and Kinetics of Phase Separation in III-V Semiconductor Alloys	14
Chemical metallization of ultrathin polymer insulation film for through-silicon via application	14
LaFeO3 thin films on Yttria Stabilized Zirconia flexible substrate	14
Hydrogen effects at sputtered Tb-doped AlNxOy:H / c-Si(p) interfaces: A transient surface photovoltage spectroscopy study	14
Numerical simulations of spherical indentation of superelastic-plastic thin films	14
Quantitative analysis of effect of dopant interaction on microstructural, physical, and electrical properties in laser-annealed SiGe:B:Ga film	14
Investigation of the temperature stability of germanium-rich SiGe layers on Si(111) substrates	14
Investigation of the optical properties of Pb1-xCdxTe films using spectroscopic ellipsometry	13
Ultrafast third order nonlinear optical properties of self-assembled indium phthalocyanine multilayer films	13
Low-temperature dopant activation using nanosecond ultra-violet laser annealing for monolithic 3D integration	13
Bandgap modulation and electrical characteristics of (AlxGa1−)2O3/4H-SiC thin film heterostructures	13
Sputter deposition and structural characterization of BiCuSeO epitaxial films on (001)/(110) SrTiO3 substrates	13
Depth distribution analysis of alloying and impurity elements in Ni-Ti alloy thin films using secondary ion mass spectrometer	13
Investigation of carrier transport in ZnO and ZnO:Al thin films sputtered at different oxygen conditions	13
Nitrogen admixture effects on growth characteristics and properties of carbon nanowalls	13
Electronic, magnetic and optical properties of various surfaces of TiHfIrZ (Z = Al and Ga) quaternary Heusler alloy	13
The effect of the degree of hydration of aluminium oxide thin films on the afterglow luminescence phenomena	13
Improvement of the uniformity of structural and electrical properties of transparent conductive Al-doped ZnO thin films by inductively coupled plasma-assisted radio frequency magnetron sputtering	13
Fabrication of graphene, graphite and multi wall carbon nano tube based thin films and their potential application as strain sensor	13
Effect of anchoring groups on the formation of self-assembled monolayers on Au(111) from cyclohexanethiol and cyclohexyl thiocyanate	13

Tunable granularity of superconducting Pb films on substrates with different thermal conductivity	13
Editorial Board	13
Adhesive-free bonding for hetero-integration of InP based coupons micro-transfer printed on SiO2 into Complementary Metal-Oxide-Semiconductor backend for Si photonics application on 8″ wafer platform	13
Room-temperature near-infrared photodetectors based on GeTe film grown by pulsed laser deposition method	13
Vacancy-type defects in TiN/ZrO2/TiN capacitors probed by monoenergetic positron beams	13
Nanoindentation based method to determine the thermal expansion coefficients of low-k dielectrics	13
Unexpected precipitates in conjunction with layer-by-layer growth in Mn-enriched La2/3Sr1/3MnO3 thin films	13
Effect of SiC thickness on microstructure and mechanical properties of (AlCrTiZrV)N/SiC nano-multilayers film synthesized by reactive magnetron sputtering	13
Hydrophobic Silica Thin Film derived from Dimethyldimethoxysilane-Tetraethylorthosilicate for Desalination	13
The intensity and direction of the electric field effects on off-center shallow-donor impurity binding energy in wedge-shaped cylindrical quantum dots	13
X-ray photoelectron spectroscopy study of Li, Na, and Mg foils: Composition and oxidation kinetics of pristine materials in batteries	13
Synthesis of zinc hydroxyl acetate nanosheet-assembled honeycomb-like and flower-like structures by chemical bath deposition method for the construction of hydrophobic surfaces	12
Ageing mediated silicon suboxide interlayer growth in porous silicon: p-Si heterostructured metal-semiconductor-metal device for enhanced UV-visible photodetection	12
Comparison of gaseous contamination of thin tungsten and gold coatings deposited from ablated plasma generated by Intense Pulsed Ion Beams	12
Surface texturized graphene oxide coating on Ti6Al4V by integrated femtosecond laser	12
Hydrogen desorption characteristics of Mg hydride films with Ni and Ni-based alloy catalyst layers deposited by magnetron sputtering	12
Editorial Board	12
Influence of post-deposition annealing on the transport properties of sputtered Bi2Se3 thin films	12
Micro-networked metal coating using self-cracked WO3 inorganic thin film as sacrificial layer: Application to transparent flexible electrodes	12
Characterization of Sn4P3 film formed by aerosol deposition for lithium-ion battery anode with liquid electrolyte and solid polymer electrolyte	12
Precursor mediated and defect engineered ZnO nanostructures using thermal chemical vapor deposition for green light emission	12
Magnetic properties of amorphous ferrromagnetic Co2MnSi/Pt multilayers	12
Editorial Board	12
Oxygen diffusion in freestanding body centered cubic tantalum structural thin films in air and in high vacuum	12
Low temperatures modification of the p-CuI thin films via a fast trimethylsilyl iodide treatment	12
Effects of p-type dopant on photovoltaic performance of pervoskite solar cells using phthalocyanine-tetrabenzoporphyrin hole transport materials: A combined theoretical and experimental study	12
Formation of the Structured Indium Tin Oxide Films by Magnetron Sputtering	12
Adhesion mechanism between mold resin and sputtered copper for electromagnetic wave shield packages	12
Microstructural and tribological properties of TiO2/Ag multilayer coatings using magnetron sputtering technique for potential applications in non-permanent implants	11
Electrochromic performances of TiO2 nanocrystals thin films for smart glass applications	11
Comparative analysis of structural characteristics and thermal insulation properties of ZrO2 thin films deposited via chemical and physical vapor phase processes	11
Fabrication of semi-transparent Cu(In,Ga)Se2 solar cells aided by Bromine etching	11
Characterization of glass titanium silicon at different compositions grown by thermal evaporation and sputtering techniques	11
Effect of polyvinylpyrrolidone concentration on optical properties of CuCrO2 thin films	11
Surface stress release in AlCrN coatings determined by synchrotron radiation multi-reflection grazing-incidence X-ray diffraction	11
Beyond surface nanoindentation: Combining static and dynamic nanoindentation to assess intrinsic mechanical properties of chemical vapor deposition amorphous silicon oxide (SiOx) and silicon oxycarbid	11
Synthesis and performance of imidazole epoxy-octane copolymer as a leveler for the through-hole electroplating copper of printed circuit board	11
Titanium oxynitride thin films by the reactive sputtering process with an independent pulsing of O2 and N2 gases	11
Editorial Board	11
Coatings consisting of Ge particles on nonwettable Si oxide surfaces and their resonance reflection spectra	11
Efficient horizontal lifting and annealing method for creating alternating multilayer structures with hard and soft multi-particle layers	11
Improvement in the upconversion efficiency of an alternating multilayer structure based on 9,10-bis(4-methylphenyl) anthracene and platinum octaethylporphyrin vacuum deposited on an in-plane oriented	11
Synthesis and characterization of reduced graphene oxide/cobalt sulfide heterostructures as the visible-light-driven photocatalysts	11
Correlation between the composition, phase, band structure, ferroelectric and leakage responses of Bi1-Ba Fe1- TiyO3 thin films	11
Structural, electronic, and thermal properties of hydrogenated silicon carbide with thermal heat transfer application in nanoscale metal oxide semiconductor field-effect transistor	11
Microstructure, mechanical and tribological properties of gradient CrAlSiN coatings deposited by magnetron sputtering and arc ion plating technology	11
The influence of thickness on morphology and iodine decomposition in Copper(I) Iodide film	11
The influence of ion assistance energy on structural and optical properties of carbon-silver nanocomposites	11
Co-sputtering deposition of high-photoresponsivity and high-mobility polycrystalline BaSi2 films on Si substrates	11
Salisbury screen with lossy nonconducting materials: Way to increase spectral selectivity of absorption	10
Electrical characteristics investigation of ferroelectric memories using stacked and mixed hafnium zirconium oxides	10
Large area small-molecule thin films deposited by the doctor blade technique implemented with computer numerical control machine	10
Impact of La3+ doping on temperature coefficient of resistivity and peak temperature of La x Ca0.89-xSr0.11MnO3 films prepared by sol-gel spin coating method	10
Machine learning based model for plasma prediction in high power pulsed magnetron sputtering processes	10
Self-organization of stearic acid salts on the hemispherical surface of the aqueous subphase allows functionalization of matrix-assisted laser desorption/ionization mass spectrometry target plates for	10
Bonding of activated ethylene–propylene rubber to surface–modified stainless steel	10
Physicochemical and structural properties of silica films prepared from perhydropolysilazane using vacuum ultraviolet irradiation	10
Thin-film Al2O3 coating on low carbon steel obtained by the sol–gel method with different peptizing acids: Corrosion investigation	10
Theoretical investigation of diffusion and electrical properties of yttria-stabilized zirconia thin film	10
Studies on kinetics of isomerization of gamma oryzanol at air-water interface	10
Magnetic domain structure of the ferrimagnetic (001) NiCo2O4 film with perpendicular magnetic anisotropy	10
Relationships between synthesis conditions and TiN coating properties discovered from the data driven approach	10
Characterization of MoS2:Nb sputtered thin films. An application as hole transport layer in Cu2ZnSnS4/Si tandem solar cells	10
In situ aluminum doped zinc oxide thin films by pulse electrodeposition for the all-electrodeposited cadmium-free copper indium diselenide solar cells	10
Grazing emission X-ray fluorescence characterization of a thin-film waveguide with laboratory equipment	10
Q-carbon as an emergent surface coating material for antimicrobial applications	10
High-energy sputtering for the deposition of a conductive and adherent single molybdenum layer for solar cell applications	10
Calibration of residual polarization in light source for broadband rotating polarizer spectroscopic ellipsometer	10
Effect of vacancy modification on the quantum capacitance of silicene- based electrode in efficient supercapacitors	10
Effect of doping level on the photoconduction and chemiresistive ethanol gas sensing of lanthanum-doped CuO films	10
On the possibility of indirect measurement of the thin carbon films thickness using energy-dispersive analysis	10
Improved passivation performance of Al2O3 interlayer/MoOX thin films continuously grown via atomic layer deposition	10
Microstructure, mechanical properties and thermal stability of Cr/WC nano-multilayered coating synthesized by ion beam sputtering	10
Comparison between the solid state reaction of ultrathin Ni and Ni/Ti with Si nanowire on silicon-on-insulator	10
Boron doping of diamond-like carbon films by pulsed laser deposition technique for photovoltaic application	10
Study of preparation and cutting performance of a chemical vapor deposition diamond coated cutting tool	10
Grafted polythiophene pendent polymer brushes and their electronanopatterning	10
Low-temperature growth of BaZrO3 and Ba(Zr,Y)O3− thin films via spray pyrolysis deposition	10
Thickness determination of multiphase layer via combined Rietveld and Grazing Incidence X-ray diffraction approach	10
High-quality c-axis oriented Al(Sc)N thin films prepared by magnetron sputtering	10

Effect of structural distortion on the metal-insulator transition in Ar+-implanted VO2 thin films	10
Fabrication and characterization of structural, morphology and electrical properties of thermally deposited quinacridone thin films	10
Structure, mechanical, and tribological properties of Ag2CrO4 high-temperature oxide coatings	10
Structural and mechanical properties of Ti-B-C coatings prepared by dual magnetron sputtering	10
Influence of the intermediate oxidation layer on the characteristics of lead zirconate titanate thin films with aluminium substrate	10
Crystallization behavior of electron-beam-evaporated amorphous silicon films on textured glass substrates by flash lamp annealing	10
Fabrication of composite structures for full spectrum photon management in solar energy utilization	10
Research on spectroscopic ellipsometry in China with future challenges	10
Homogeneous CuGaSe2 growth by the CuPRO process with In-Situ AgBr treatment	10
Low temperature open-air plasma deposition of amorphous tin oxide for perovskite solar cells	9
Influencing the structural, vibrational and electronic properties of pulsed laser deposited PrNi0.95Cu0.05O3 thin films by tuning epitaxial strain	9
Inhomogeneous intrinsic stress in sputtering-deposited platinum films and its effect on the formation of helical structures	9
Effect of pulse width on the mechanical properties and high-temperature steam oxidation resistance of Cr coatings deposited by high-power impulse magnetron sputtering	9
Behavior of iron deposition on the surface structure and electrical properties of CrBr	9
Liquid iodine sensitization for enhanced mid-infrared detection of lead selenide films	9
Improved ultraviolet stability of fullerene-based organic solar cells through light-induced enlargement and crystallization of fullerene domains	9
Molybdenum nitride thin films synthesized by microwave electron cyclotron resonance – Assisted reactive pulsed laser deposition	9
A remote atmospheric pressure plasma-assisted textile functionalization process on polymeric scaffolds for bone tissue engineering	9
Schottky conduction mechanism in plasma polymerized N-benzylaniline thin films	9
Atmospheric pressure plasma deposition of eugenol-derived film on metallic biomaterial for suppression of Escherichia coli and Staphylococcus aureus bacterial biofilm	9
Tailoring the morphology of Mo2S3/MoP2 composite thin films via aerosol assisted chemical vapor deposition for enhanced hydrogen evolution reaction performance	9
Structural, optical and electrical properties of ZnO–InN quaternary compound films	9
The stabilization of Ni(OH)2 by In2O3 rods and the electrochromic performance of Ni(OH)2/In2O3-rod composite porous film	9
Tuning of work function of ZnO by doping and co-doping: An investigation using X-ray photoelectron spectroscopy	9
Facile fabrication of tailorable Ag/AgCl reference electrodes for planar devices	9
Size effect on stretchability of Cu films on wrinkled polydimethylsiloxane substrates	9
High quality aluminum nitride layer grown with a combined step of nitridation and trimethylaluminum preflow	9
Preparationof fabric-like transparent electrodefor flexible perovskite solar cell	9
Editorial Board	9
Enhanced high-temperature stability of indium tin oxide - Indium oxide thermocouples by two-step annealing	9
Strain engineering the electronic properties of the type-II CdO/MoS2 van der Waals heterostructure	9
Effect of grain size on the thermal stability of electrodeposited nanocrystalline nickel: X-ray diffraction studies	9
First-principles investigation of the metal-insulator transition in rutile RuO2	9
Structural and electrochemical properties of high quality epitaxial titanium carbide thin films grown by pulsed laser deposition on MgO (111) and Al2O3 (001) substrates	9
Effect of deposition temperature on topography and electrochemical water oxidation of NiO thin films	9
Effect of annealing on the molecular ordering and crystal structure of iron phthalocyanine thin films on Si (111) surface	9
Initial oxidation mechanism of FeCrAl thin films with Nb and Si additions	9
Impact of Na diffusion on Cu(In, Ga)Se2 solar cells: Unveiling the role of active defects using thermal admittance spectroscopy	9
Direct current sputter deposited CuO layers on conductive glass: Towards a maximum photoelectrochemical response of photocathodes	9
Effect of two-step cubic GaN buffer layer on the radio-frequency plasma-assisted molecular beam epitaxy growth of cubic AlN films grown on MgO (001) substrates	9
Crack suppression in electrodeposited brass film through controlling growth stresses by co-depositing with Bi	9
Erratum to “The effect of carbon doping on microstructure, mechanical properties, wear resistance and cutting performance of AlTiCN coating” [Thin Solid Films 713 (2020) 138344]	9
Corrosion resistance and conductivity behavior of Cr-Al-N MAX phase coatings prepared by magnetron sputtering technology	9
Enhancing thermoelectric properties of bismuth telluride and germanium telluride thin films for wearable energy harvesting	9
Photoluminescence characteristic of as-grown and thermally annealed n- and p-type modulation-doped Ga0.68In0.32NxAs1-x/GaAs quantum well structures	9
Construction of durable polyurea/polyvinylidene chloride composite film with high water vapor barrier property	9
Weak antilocalization and gigahertz acoustic phonons in Bi2Se2Te and Bi3Se2Te-dominated thin films grown using pulsed laser deposition	8
Fatigue fracture mechanism of sputtered AlSi alloy film by pulsating-tension cyclic loading testing	8
Growth and characterization of uranium oxide thin films deposited by polymer assisted deposition	8
Editorial Board	8
Kesterite monograins for solar cells and water splitting applications	8
Preparation of thin films of molecule-based magnets for optical measurements	8
A comprehensive material study of CdSeTe films deposited with differing selenium compositions	8
Si-decorated photoanodes for dye sensitised solar cells	8
Impacts of 0D Cs4PbI6 phase in all-inorganic CsPbI3 perovskites on their physical, optical properties and photovoltaic performances	8
Multidimensional characterization of Ni-Zn ferrite films based on laser-induced breakdown spectroscopy technology	8
Growth and vacuum ultraviolet characteristics of magnesium fluoride protected aluminum reflective coatings prepared by electron-beam evaporation	8
Determination of thermal conductivity of phase pure 10H-SiC thin films by non-destructive Raman thermometry	8
Metal sulfide sub-nanometer clusters formed within calix(8)arene Langmuir-Blodgett films	8
Formation of Ti2AlC-based thin films via magnetron sputtering and annealing under vacuum	8
Editorial Board	8
Single crystal-like thin films of blue bronze	8
The evolution of morphology and structure of spin-coated Zinc Acetate thin films and their impact on ZnO film morphology	8
Effect of treatment time and radio frequency power on roughness and wettability of oxygen plasma-etched Cadmium Telluride thin films	8
Effects of Ta, Nb, Ba, and Sb concentration on structural, electrical, and optical properties of SnO2 thin films prepared by metal organic decomposition using spin coating	8
Fluorine-free fabrication of a magnetic-responsive sponge as absorbent for highly efficient and ultrafast oil-water separation	8
Evidence of C migration in the SiO2 to the SiO2/Si interface of C-implanted structures	8
Suppression of crystallization process in Atomic Layer Deposited hafnium oxide films	8
Naphthyl end-capped bithiophene film on plant-based polyamide-4,10	8
ICAE 2021 - Preface	8
11.6 % Efficient textured InP solar cell with Nb2O5: A cutting-edge electron transport layer innovation	8
Caffeine-driven n-type doping in multilayer MoS2 field effect transistor	8
Editorial Board	8
Comparison of electron irradiation on the formation of surface defects in situ and post thin-film LiF/Si(111) deposition	8
Thickness regulation of the mechanical properties and failure control of Ti/TiN and Ti(N)/TiN bilayer stacks	8
Halogen-substituted zinc(II) phthalocyanines: Spectral properties and structure of thin films	8
Ethanolamine phospholipids at the air-water interface as cell membranes models of microorganisms to study the nanotoxicology of sakuranetin	8
Preparation and properties of a super-hydrophobic, electromagnetic interference shielding titanium nitride film	8
Perovskite stannate La-doped BaSnO3 films for near- and mid-infrared plasmonic applications	7
Investigation of long term stability of W/B4C multilayer structures	7
Fabrication of a tailorable polystyrene nanoscale mesh of honeycomb morphology using nano sphere lithography	7
Revealing plasmonic TiN films with low power radio-frequency magnetron sputtering technique	7
Study of AlScN thin film deposition on large size silicon wafer	7
Structural, optical, and electrical properties of strontium-doped tin dioxide films for high photoconductivity	7
Scanning tunneling microscopy investigation of self-assembly behavior of C60 on an intrinsically patterned Ag5Se2 surface	7
Pb-Bi-S thin films by chemical deposition - optical and electrical properties	7
Electrochemical properties of cadmium doped tin oxide film and activated carbon composite electrode	7
Saturation degree in dopant monolayers as modulator of Al-doping of ZnO by the Atomic Layer Deposition-supercycle approach	7
Fabrication of high-reliability silver nanowire transparent film heaters and the associated electromigration failure mechanism	7
Fracture toughness of AlTiN coatings investigated by nanoindentation and microcantilever bending	7
Strengthening effect of inclusion of ZrC nano-ceramic particles on the corrosion and wear resistance of Ni-P electroless deposits	7
Magnesium doped semipolar (11–22) p-type gallium nitride: Impact of dopant concentration variants towards grain size distributions and crystalline quality	7
Electrochemical deposition of indium into oxidized and unoxidized porous silicon	7
Controlling adhesion and thermal stability of tetrahedral amorphous carbon coatings with intermediate sp3C fraction	7
Wetting-state transition of random surfaces	7