Wood Science and Technology

Article	Citations
Maturation-related phenolic compounds in cachaça aged in oak barrels: influence of reuses	59
Enhanced mechanical and humidity resistance properties of heat-treated wood by impregnation of low-molecular-weight lignin	53
Hydroxyl radicals production via quinone redox cycling by the ligninolytic bacteria Streptomyces cyaneus and its effectiveness to degrade kraft lignin	51
Kinetic and environmental effects of xylanase-pectinase pretreatment-mediated weakly alkaline hydrogen peroxide bleaching of poplar chemi-thermomechanical pulp	37
Ionic liquid, ultrasound-assisted synthesis of lignin nanoparticles for barrier-enhanced all-cellulose nanocomposite films	32
Birefringence of cellulose: review, measurement techniques, dispersion models, biomedical applications and future perspectives	31
Identification of wood species from Côte d’ivoire forest using near-infrared spectroscopy	25
Wood-water interactions of primers to enhance wood-polyurethane bonding performance	23
Biomorphic porous TiO2 with wood template size scaling for improved adsorption and photocatalysis performance	22
Effect of high-intensity microwave (HIMW) treatment on chemistry of radiata pine	21
Unveiling the evolution of structures and properties of wingceltis (Pteroceltis tatarinowii) phloem fibers throughout the traditional pulping process	21
Enzymatic hydrolysis lignin and kraft lignin from birch wood: a source of functional bio-based materials	20
Electro-depolymerization of Kraft lignin with deep eutectic solvents	18
Potential of iron-loaded Japanese cedar charcoal as a collectable adsorbent for 3d-block metal ions	17
A flame-retardant densified wood as robust and fire-safe structural material	17
The interrelation of microfibril angle and the lignified S2 layer on hygrothermal recovery in juvenile and mature compression wood of Cryptomeria japonica and Chamaecyparis obtusa	16
Research on stress relaxation behavior of confined Chinese fir subjected to compression	16
Scale modeling of thermo-structural fire tests of multi-orientation wood laminates	15
Valorisation of beech steaming condensate: in vitro phytotoxicity and selectivity	15
Preparation of nitrogen-enriched pine sawdust-based activated carbons and their application for copper removal from the aquatic environment	15
Full component utilization of lignocellulose : enzymatic hydrolysis after alkali-coupled binary DES pretreatment and valorization of the pretreatment liquor for sensing hydrogels	14
The chemical composition and antifungal activity of cork from Quercus variabilis	14
Bark-based biorefineries: anatomical and chemical characterization of the bark of endemic Quercus vulcanica of Turkey	14
Micromechanical analytical and inverse numerical modeling methods for determining the transverse elastic modulus of bamboo	14
Morphological analysis of inosculated connections in weeping figs: insights on density, geometry, fiber structures, and compositional variations	13

Differences in the hygroscopic behavior of bamboo fiber and parenchyma	13
Development and evaluation of deacetylated konjac glucomannan based films incorporated with cellulose nanofibers and alumina nanoparticles	13
Editorial	13
A lattice model with a progressive damage applied to fracture problems of wood	13
Char formation and smoke suppression mechanism of montmorillonite modified by ammonium polyphosphate/silane towards fire safety enhancement for wood composites	13
3D cellular characterization and finite element analysis of cork compressive behavior based on high-resolution X-ray microtomography	12
Wood modification by in situ polymerization of non-isocyanate polyurethane using biobased erythritol bis(carbonate) and polyamines	12
Evaluation of ornamental/exotic plant extracts as natural preservative methodology against termites and fungi	12
Machine learning based tomographic image reconstruction technique to detect hollows in wood	12
Comment on the structure of softwood lignin	12
Influence of natural aging on wood combustion heat release	12
Morphologic evolution in simulated wood densification	12
Antioxidant, antiproliferative, anti-inflammatory, and enzyme inhibition potentials of Ficus carica wood bark and related bioactive phenolic metabolites	12
Fracture energy of birch in tension perpendicular to grain: experimental evaluation and comparative numerical simulations	11
Synthesis of phenolic resins by substituting phenol with modified spruce kraft lignin	11
New ester-type chemical bonding wood adhesion with a dicarboxylic acid compound	11
Unsupervised wood species identification based on multiobjective optimal clustering and feature fusion	11
Triboelectric surface field strength of wood after brushing	11
A model to explain microscopic mechanism of hygrothermal recovery in tension wood G-fiber	11
Lapachol from Indonesian teak (Tectona grandis) wood waste as a natural additive for alkaline cooking	11
Moisture diffusion characteristics of bamboo: influence of anatomical variations through radial direction	11
Construction of superhydrophobic PDMS@MOF-199/wood sponge hybrid membrane for ultrahigh-flux gravitational oil/water separation	11
Structural and rheological insights of oxidized cellulose nanofibers in aqueous suspensions	11
Exploring visible spectrum wavelengths in light transmission through wood material	11
Experimental assessment of Mechano-Sorptive models for wood drying by combining fork and flying wood tests	10
Mechanical properties of Virginia creeper tendrils	10
Exploring the effect of lignin on the chemical structure and microstructure of Chinese fir wood by segmental delignification	10
Isolation of cellulose and lignin from Acacia crassicarpa and Eucalyptus pellita wood by prehydrolysis soda cooking with 2-methylanthraquinone as a green additive	10
Damage zone analysis and its effect on the elastic constants of beech blocks with different grain orientations under compression	10
Effect of solvent type and pH degree on the chemical composition of kraft black liquor via ARAS method	10
Doubling genome size of energy willow affects woody stem cell wall structure, chemistry, and biogas yield	10
Interfacial bonding and axial failure mechanisms between cement hydrates and wood cellulose: a molecular dynamics study	10
Chitosan–caffeine formulation as an ecological preservative in wood protection	10
Semi-supervised learning for quality control of high-value wood products	10
Effects of high-intensity microwave (HIMW) treatment on mechanical properties and bending failure mechanisms of radiata pine (Pinus radiata D. Don)	9
Effects of taurine on the thermal degradation kinetics and flammability of poplar wood	9
Ultrasound activation of PS/H2O2 dual oxidants synergistically enhances porosity and wettability of poplar wood	9
Mechanisms and influencing factors of branch fracture in Caragana korshinskii: a numerical simulation using XFEM	9
The influence of the solvent removal process on subsequent molding of impregnated wood with melamine formaldehyde resin	9
Archeological wood conservation with selected organosilicon compounds studied by XFM and nanoindentation	9
A 3D multi-scale hygro-mechanical model of oak wood	9
Wood-water relationship and micro-chemical properties of huminated archaeological European elm (Ulmus laevis P.)	9
Conservation of model degraded pine wood with selected organosilicons studied by XFM and nanoindentation	9
Qualitative and quantitative study of the anatomical characteristics of Phyllostachys edulis rhizome	9
Influence of photodegradation on brown-rot fungi decay in Southern pine wood: a cyclical study	9
Accuracy of digital image correlation system with telecentric lens for compression tests of wood	9
Water uptake properties of lithium chloride modified wood and its application in water collection	9
A novel three-dimensional model for the prediction of ultrasonic velocity in wood considering its orthotropy	9
Transient hygro- and hydro-expansion of freely and restrained dried paper: the fiber-network coupling	8
Correction: Supercritical CO2 drying of New Zealand red beech to below the fibre saturation point reduces collapse distortion	8

Radial distribution of tension wood properties in a thick branch of Zelkova serrata Makino. A view of G-layer development	8
Effects of thermal modification on the flexure properties, fracture energy, and hardness of western hemlock	8
Swelling of beech wood (Fagus sylvatica L.) during gaseous ammonia treatment as a function of pressure	8
The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions	8
Experimental and numerical analysis of the pyrolysis dynamics of a single wood particle: presentation of the radiographic technique	8
Effect of heating medium and pressure on the set recovery and physicochemical properties of surface-compressed Chinese fir	8
Evaluating the effect of anomalous images on computer vision-based wood identification models	8
In situ analysis of chemical changes of thermally compressed wood by 2D NMR	8
Characterization of iron-loaded charcoal using infrared-photoacoustic spectroscopy: factors governing graphitization	8
Effect of tracheid cell structure on gas permeability and porosity in conifer species	8
The study of microstructure and electrical conductivity of nano-Cu film/transparent wood constructed based on magnetron sputtering	8
Application of headspace solid-phase microextraction gas chromatography mass spectrometry (HS-SPME GC-MS) analysis to support illicit timber trafficking investigations	8
Variation of quantitative anatomical features due to carbonization and their impact on size classes for charcoal identification	8
Comparative study of bleached and lignin-containing cellulose nanofibrils as reinforcements in epoxy composites	8
Traditions, anomalies, mistakes and recommendations in infrared spectrum measurement for wood	7
Effect of attached weight on the measurement of the Young’s modulus and loss tangent of solid wood via the free and forced flexural vibration methods	7
Effect of norlignan components in black heartwood of Japanese cedar on the self-bonding performance of binderless boards	7
Negative gravitropism of Gnetum gnemon: the effect of the reaction wood and reaction phloem	7
Effect of the pretreatment on the porosity of the hybrid activated carbons prepared from wood-based solid and liquid precursors	7
Comparative study of topochemical structures of polymorphous ornamental bamboo (Phyllostachys spp.) and their bioconversion performance after mild acid pretreatment	7
Theoretical study on the reaction mechanism of Dakin oxidation: influence of methoxy groups	7
A multi-scale modelling strategy to determine the effective elastic properties of Pinus pinaster (Ait.) accounting for variability	7
Obituary: T. Kent Kirk (1940–2025)	7
Green and sustainable fabrication of DES-pretreated high-strength densified wood	7
Cross-grain fracture characterization in softwood using artificial neural network analysis of acoustic emissions	7
Building bridging structures and crystallization reinforcement in sodium silicate-modified poplar by dimethylol dihydroxyethylene urea	7
Extraction of cellulose nanocrystals with redispersion ability via deep eutectic solvents enhanced with nickel chloride hydrate	7
Mapping within-tree variation of Douglas-fir wood properties for trees grown at different planting densities	7
Formation of transcrystallinity and characterization of its nanoscale mechanical properties in bamboo fiber-anchored nano-TiO2/polypropylene composites	7
X-ray diffraction, Fourier transform infrared spectroscopy, and thermal decomposition analyses of virgin cork elements in Quercus variabilis grown in Korea	6
Hygro-mechanical long-term behaviour of spruce, pine and lime wood: parameter identification and model validation	6
Evaluation of the antifungal efficiency of coatings on wood	6
In-situ activated pore structure engineering via Ca(AC)2 template towards high areal capacity for wood-derived thick carbon electrode in lithium-ion batteries	6
Green ethanol-water stepwise fractionation of industrial lignin for phenolic-enriched fractions with enhanced antioxidant activity	6
Novel bamboo-based metal composites prepared with a high-efficiency thermal spraying method: a preliminary study	6
Are interfaces the key? Validation of interfacial interactions in bio-based polyurethane-wood composites by quantitative nanomechanical property mapping	6
Peltogynoids contributing to discoloration in Peltogyne mexicana heartwood	6
Lignocellulose degradation pattern and structural change of the sawdust substrate and enzyme secretion by Lentinula edodes during its production	6
Flame retardancy of chemically surface-modified hardwoods by electron-beam-initiated polymerisation of impregnated acrylate monomers	6
Water sorption in wood: effect of extractives on water sorption and hysteresis behavior	6
Reversible and irreversible effects of a moderate heat treatment on the moisture sorption and swelling behavior of modern and historical oak wood	6
Determining the pore structure and radial variability of moso bamboo (Phyllostachys edulis)	6
The relationship between branch scar attributes and knot features in birch (Betula pendula and B. pubescens)	6
Origin-specific differences in the durability of black locust (Robinia pseudoacacia) wood against wood-destroying basidiomycetes	6
Method matters: the influence of the pH adjustment and liquid-liquid extraction on the analysis of kraft black liquors	6
On the selection of the weighting parameter value in optimizing Eucalyptus globulus pulp yield models based on NIR spectra	6
Characterizing the chemistry of artificially degraded Scots pine wood serving as a model of naturally degraded waterlogged wood using1H–13C HSQC NMR	5
Improving gas permeability and characterizing the multi-scale pore size distribution of radiata pine (Pinus radiata D. Don) treated via high-intensity microwave	5
Grey alder (Alnus incana (L.) Moensch) bark valorisation potential: longitudinal variability of chemical composition and antimicrobial, antioxidative, and cytotoxic activity of extractives	5
Theoretical-empirical prediction model of ice content in wood based on electrical impedance characteristics	5
Pressurized liquid extraction for profiling wood metabolites by GC×GC-TOFMS	5
Uniformity of delignification during kraft pulping of hardwood chips: impact of wood structure and the importance of impregnation	5
Effects of hydroxyl groups and pores on moisture sorption behavior of heat-treated wood and its pore structure prediction	5
Exploring wood as a sustainable solution for water filtration: nanoparticle removal, size exclusion and molecular adsorption	5
A route of polyethylene glycol-based phase change heat storage wood with AlN as the thermal conductive filler	5
Solar drying of timber in Harbin, China	5
Growth-ring effect on moisture-induced stress and damage development in glued laminated timber	5
Sugar-painting inspired branched ureido polymers as high-performance formaldehyde-free wood adhesive	5
Raman characterization of layer of graphene-like structures in 3d-transition metal-loaded charcoal by comparison with X-ray diffraction data	5
Impregnation and delignification during kraft pulping of hardwood chips: characterization using in-situ X-ray tomography	5
Relationship between structural damage and performance failure of wood-based electrothermal composites with extreme aging treatment	5
Visualization of the spatial distribution of the heartwood constituents of Dalbergia odorifera	5
Multi-phase model for moisture transport in wood supported by X-ray computed tomography data	5
‘Tracheid effect’ light scattering response of common commercial species of Malaysia using red laser (650 nm) for grain angle detection, and machine learning based performance prediction	5
Experimental evaluation of literature-established delignification techniques on poplar wood	5
A comprehensive evaluation of axial gas permeability in wood using XCT imaging	5
The impact of surface acid species strength on the cellulose structural changes via hydrolysis over solid acid catalyst	5
Large-area hydrophobic transparent wood with near-infrared fluorescence for solar energy conversion	5
Seasonal biochemical changes in Betula tortuosa Ledeb. annual rings in Alpine forest-tundra of Kuznetsk Ala Tau Mountains	5
Comprehensive pyrolysis modeling of flame-retardant densified wood: development and validation of a multistep reaction scheme	5
Progressive degradation of acetylated wood by the brown rot fungi Coniophora puteana and Rhodonia placenta	5
Hydration tests of four wood composites particles with cement	5
Impact of heat treatment on database recall and metabolomic fingerprints used for timber identification employing direct analysis in real time time-of-flight mass spectrometry	5
Classification of wood species in trade using metabolomic profiling by GC×GC-TOFMS	4
Residual stresses in adhesively bonded wood determined by a bilayer flexion reporter system	4
Water penetration in the microstructure of hardwood revealed by NMR relaxometry	4
Method for evaluating the bond strength development of pMDI adhesive using ABES	4
Analysis of shear creep properties of wood via modified Burger models and off-axis compression test method	4
Simultaneous lignocellulose fractionation and direct lignin nanoparticles formation of bamboo with p-toluenesulfonic acid/hydrogen peroxide pretreatment	4
Study on properties of SiO2 mineralized delignification and hydrogel treated poplar wood composites	4

Characterisation of hygroelastic properties of compression and opposite wood found in branches of Norway spruce	4
Microwave characterization and mathematical simulation of dielectric properties in poplar wood with different moisture contents	4
A numerical method to integrate duration-of-load and bacterial deterioration for long-standing timber piles	4
A review on the role of thermogravimetric analysis in assessing thermal stability and degradation of wood	4
An innovative strategy to prepare compressed wood with improved dimensional stability and mechanical properties	4
Sustainable transparent wood composites from alternative biomass sources and polyvinyl alcohol for optical applications	4
The isolation and characterization of cellulose nanofibrils from the endocarp of Cocos nucifera	4
Effects of visual stimulation using wooden-wall images with different amounts of knots on psychological and physiological responses	4
Multilevel analysis of six species of Phyllostachys bamboo and Arundo donax: preliminary survey on Italian grown stands	4
Dimensional stabilization of wood by microporous silica aerogel using in-situ polymerization	4
Combined X-ray diffraction tomography imaging of tension and opposite wood tissues in young hybrid aspen saplings	4
Swelling of oak wood in alcoholic solutions: synergy and memory effects between water and ethanol	4
Optimizing the interface compatibility of transparent wood for green phase-change thermal storage	4
Automated species discrimination and feature visualization of closely related Pterocarpus wood species using deep learning models: comparison of four convolutional neural networks	4
Method for determination of beech veneer behavior under compressive load using the short-span compression test	4
Optimization of the extraction of polyphenols from Pinus pinaster residues using deep eutectic solvents: a sustainable approach	4
Biochemical insights into Agarwood resin formation: comparative analysis of microbial induced via insect-infested and artificially induced Aquilaria malaccensis tissues	3
Wood property genetic parameter estimation from first-generation Douglas-fir progeny tests	3
Effect of saturated steam on the surface quality and mechanical properties of sliced bamboo	3
Protein content and antioxidant enzymes activity in reaction wood of poplar and their response to different levels of sustained bending stress	3
Highly efficient and sustainable wood-based plasmonic photoabsorber for interfacial solar steam generation of seawater	3
Correction: Water sorption in wood: temperature and extractive influence on heat of sorption	3
Cross-scale analysis of moisture absorption in microwave-treated Chinese fir (Cunninghamia lanceolata) wood: synergistic effects of chemical composition and pore structure	3
Isolation and identification of extracted components from Wenge (Millettia laurentii) heartwood and the mechanism of color change	3
Improving stable anti-weathering performance of wood by impregnation with active aminated alkali lignin	3
Ultrasonic study of the influence of moisture content on the viscoelastic behavior of tropical wood	3
Influence of Amburana cearensis barrels on the flavour profile and complexity of cachaça during maturation	3
Functional improvement of fast-growing wood based on nano-ZnO/PDMS double-layer structure	3
Determination of local mechanical properties of clear wood in relation to the local fiber deviation	3
Thickness of zero-strength layer in timber beam exposed to fuel-controlled parametric fires	3
Reducing fluorescence interference for improved Raman spectroscopic analysis of plant cell walls	3
Assessing analytical techniques for wood metabolomics through a comparison of DART-TOFMS and GC×GC-TOFMS for species-level wood identification	3
The effect of moisture content and temperature on the propagation characteristics of guided waves in timber utility poles-numerical and experimental validation	3
Prediction of moisture-induced cracks in wooden cross sections using finite element simulations	3
Evaluating the quality of surface carbonized woods modified with a contact charring or a gas flame charring technique	3
Comparing the structure and properties of three Eucommia ulmoides wood clones based on the coefficient of variation-rank sum ratio method	3
Study on the synergistic modification of Chinese fir wood cell walls by carbon dots and polyethylene glycol	3
Electromagnetic shielding and fire-retardant wood obtained by in situ aniline polymerization	3
Preservation status and microbial community of waterlogged archaeological woods over 7800 years old at the Jingtoushan Site, China	3
Effects of cycle load amplitude and count on fatigue damage progression in wooden furniture mortise-and-tenon joints quantified using porosity, fit, friction coefficient, and direct withdrawal load re	3
Effects of action processes on wood modification: the in situ polymerization of epoxy monomers as an example	3
Supercritical CO2 drying of New Zealand red beech to below the fibre saturation point reduces collapse distortion	3
A multiple spectral important feature fusion method for wood species identification	3
A canonical approach to distinguishing juvenile and mature wood	3
Effect of genotype on selected properties of young plantation-grown Eucalyptus pellita F. Muell. and its hybrids for structural applications	3
Optimisation study of Ulmus pumila woody biomass fractionation by steam explosion for bioproducts production	3
Production of activated biocarbons by microwave-assisted chemical activation of hardwood sawdust and their application in the simultaneous removal of polymers of different origins from aqueous systems	3
Effect of duration of load on shear performance of wood parallel to the grain direction using tensile shear testing	3
Bending performance improvement of spruce LVL using adhesive-bonded flax fiber composites	3
Fire spread characteristics of dry–wet aged fir under environmental pressure	3