Polymer Degradation and Stability

Article	Citations
Non-Arrhenius behavior: Influence of antioxidants on lifetime predictions for materials used in the cable and wire industries	185
Editorial Board	176
Editorial Board	168
One-pot preparation of flame-retardant waterborne polyurethane by glycolysis of PET with ionic liquids	139
A multifunctional integrated coating reinforced with exfoliated boron nitride towards superior decorative, antibacterial, durable, and flame-retardant performances	128
Synthesis of two TiO2-based prodegradant additives and their efficiency in inducing the accelerated photo-oxidation of low-density polyethylene	117
Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: Storage stability, curing behaviors and flame retardancy	111
Mini-review on degradation mechanism of perfluorosulfonic acid membranes induced by carboxylic end-groups	93
Novel poly(azoamide triazole)s containing twin azobenzene units in the backbone. Synthesis, characterization, and in vitro degradation studies	91
Biodegradability of oxidized films of polyhydroxyalkanoate copolymers containing 2-hydroxy-4-methylthiobutyrate unit in seawater	89
Enhancing the performance of recyclable polyurea through coordination of rigid chain segments and graphene platelets	87
Editorial Board	85
A novel phosphorus/nitrogen-containing polyacrylonitrile fiber with excellent flame retardancy and mechanical properties	82
Insight into stabilization behaviors of Lignin/PAN-derived electrospun precursor fibers	79
Corrigendum to ‘Synthesis of a vanillin-derived bisDOPO co-curing agent rendering epoxy thermosets simultaneously improved flame retardancy, mechanical strength and transparency’ [Polymer Degradation	76
A novel aminothiazole-based cyclotriphosphazene derivate towards epoxy resins for high flame retardancy and smoke suppression	72
Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer	70
The evolution of microstructure of Styrene-Isoprene-Butadiene Rubber during the thermal-oxidative aging process using In-situ FTIR way	68
Novel phosphorous-containing epoxy thermosets with improved anti-flammability, smoke suppression, and dielectric properties	67
Controlled architecture of polyhedral oligomeric silsesquioxane-functionalized poly(glycidyl methacrylate)/polyester composites using surface-initiated ICAR ATRP Technique for High Flame Retardancy an	66
Time domain NMR evaluation of thermal and thermochemical aging of nitrile rubber on crosslinking and mechanical properties	64
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene	64
Adhesion behaviors and kinetics at silicone foam/metal interfaces	62
Experimental characterization of epoxy/quartz composite material exposed to PDs	61
Multi-functional solvent-free SiO2 nanofluid simultaneously improve major properties and fluidity of epoxy resin: A new strategy beyond nanofillers	61

Water-induced failure in polymer coatings: Mechanisms, impacts and mitigation strategies—A comprehensive review	59
Exploratory DSC investigation on the solvolytic depolymerization of PET in varied solvent systems and in the presence of model additives and contaminants	59
Comprehensive hydrolytic degradation study of a new poly(ester-amide) used for total meniscus replacement	59
Simulation of the Chalking of Silicone Rubber Based on Tetramethylammonium-Hydroxide-Catalyzed Scission Reaction	57
Enhancing the recyclability of ELV plastic bumpers: Characterization of molecular, morphological, rheological, mechanical properties and ageing degradation	57
Durable flame-retardant cotton fabrics with tannic acid complexed by various metal ions	56
A UV-curable coating constructed from bio-based phytic acid, D-sorbitol and glycine for flame retardant modification of rigid polyurethane foam	56
Synthesis of magnolol-derived bisphosphate for fabrication of bismaleimide resins with intrinsic anti-flammability and smoke suppression	56
A facile technique to investigate the char strength and fire retardant performance towards intumescent epoxy nanocomposites containing different synergists	54
Composition-controlled degradation behavior of macroporous scaffolds from three-armed biodegradable macromers	52
Synergistic effect of zinc borate and microencapsulated black phosphorus nanosheets for improved flame retardancy and smoke-suppression performance of epoxy resin	52
ZIF-8@Co-doped boronate ester polymer core-shell particles: Catalytically enhancing the nonflammability and smoke suppression of epoxy resin	51
The development of a new type of sustainable flame retarded polyamide 6 (PA6)-based composites, modified with biocarbon/phosphorus flame retardant/basalt fiber system (BC/OP/BF). The evaluation of the	51
New modification strategy for thermoplastic polyurethane with high hygrothermal ageing resistance and flame retardancy	51
Construction phosphorus/nitrogen-containing flame-retardant and hydrophobic coating toward cotton fabric via layer-by-layer assembly	51
Insight into effect of electrolyte temperature on electroactivity degradation of conducting polypyrrole in NaOH	50
Systematic study of the condensed phase of phosphorus-based flame retarded foams	50
Robust water diffusion modeling in a structural polymer joint based on experimental X-ray tomographic data at the micrometer scale	50
Study of UV ageing effects in modern artists’ paints with MeV-SIMS	50
In situ nanofibrillar fully-biobased poly (lactic acid)/poly (ethylene 2,5-furandicarboxylate) composites with promoted crystallization kinetics, mechanical properties, and heat resistance	49
Effect of γ irradiation on the properties of functionalized carbon-doped boron nitride reinforced epoxy resin composite	49
Assessing the effect of minimally invasive lipid extraction on parchment integrity by artificial ageing and integrated analytical techniques	48
Strategy for the NR/BR blends with improved thermo-oxidative resistance	48
Flame retardant behavior of bio-based epoxy resin bearing pyridazinone and dynamic ester bond via self-blow-out and vesicular carbon formation	48
PEEK composite resin with enhanced intumescent flame retardancy loaded with Octaphenylsilsesquioxane and nano calcium carbonate and its application in fibers	48
Fabrication of NiO and TiO2 supported nano calcium carbonate and its effect on the flame retardancy and thermal stability of epoxy resin composites	48
Epoxy-based reflective adhesive for lamination of single-sided metallized film over glass fabric destined for its use as reflective layer in fire proximity clothing	46
Ageing of UHMWPE in presence of simulated synovial fluid	46
Flame-retardation of thermoplastic polyesters via cyclotetramerization from phthalonitrile to phthalocyanine: Pyrolysis processes and fire behaviour	46
Flame retardancy performance and mechanism of polyvinyl alcohol films grafted amino acid ionic liquids with high transparency and excellent flexibility	46
Wear behavior of UHMWPE composites under oxidative effect	46
Effect of the crystal orientation on the enzymatic degradation rate of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) fibers	45
Biomass-derived polyelectrolyte fire retardant: Synergistic phosphorus-nitrogen doping for enhanced epoxy resin flame retardancy and smoke suppression	44
Biobased super engineering plastic nanocomposite of cellulose nanofibers and isosorbide	43
Investigation on the heat resistance mechanism of phosphate containing formulations using the pyrolysis GC-MS system	43
Deeper insights into flame retardancy of polymers by interpretable, quantifiable, yet accurate machine-learning model	43
A bio-based flame retardant coating for improving flame retardancy and anti-dripping performance of polyamide 6 fabric	42
Recycling of personal protective equipment: Sanitisation, degradation and polymer blend formulations	42
Simultaneously-enhanced flame retardancy, mechanical property and acid/alkali corrosion resistance of ethylene vinyl acetate/aluminum trihydrate composite induced by crosslinking and microencapsulated	42
Computational study of synthetic and natural polymer additives — Antioxidant potential of BHA, TBHQ, BHT, and curcumin	41
Catalyst-free sustainable epoxy vitrimers with fire safety offered by phosphorus-containing compounds	41
Restabilization – 30 years of research for quality improvement of recycled plastics review	41
Improvement of UV aging resistance of PBAT composites with silica-immobilized UV absorber prepared by a facile method	41
Mechanically robust and flame-retarded EPDM composites with high loading of Mg(OH)2 based on reversible crosslinking network from Diels-Alder reactions	41
Mitigation of the Color Generated During Mechanical Recycling of PET/MXD6 blends	40
Organic copper phosphate-decorated layered double hydroxide to enhance the flame retardancy and smoke suppression of epoxy resin	40
Novel insights into the correlation composition-structure-property of recyclable carbon fiber reinforced thermosetting resin composites	40
Thermal degradation behavior of 10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide modified epoxy resin with liquid oxygen compatibility	40
Char Structure and Charring Mechanism of Phosphazene-Based Epoxy Resin during Combustion	40
Flame retardant properties of Viscose/Carrageenan fibers blend papers	40

Preparation and properties of highly efficient flame-retardant Lyocell fabrics: Mitigating the acidity effect of phytic acid on the mechanical properties under pad-dry-curing process finishing conditi	40
Forecasting the hydrolysis of poly(butylene succinate) depending on molecular mass and temperature in soil and aquatic systems validated on the example of a football hybrid turf	39
Experimental and computational study of polystyrene sulfonate breakdown by a Fenton reaction	39
Thermal stability and physical properties of poly(alkyl fumarate)s with Bornyl and Isobornyl groups as the geometrically isomeric esters	39
Sustainable biocomposites based on Mater-Bi and grape pomace for a circular economy: Performance evaluation and degradation in soil	39
Controlled modification of polyvinylidene fluoride as a way for carbyne synthesis	39
Highly efficient multifunctional mono-component flame retardants comprising of sulfenamide and phosphate moieties for polypropylene	38
Use of seawater to improve the static strength and fatigue life of bonded coated steel joints	38
A bi-DOPO type of flame retardancy epoxy prepolymer: Synthesis, properties and flame-retardant mechanism	38
Thermal degradation behavior of maleimide-methacrylate copolymers bearing pendant allyl groups	37
Editorial Board	37
TG-FTIR-QMS analysis of more environmentally friendly poly(geranyl methacrylate)-co-poly(cyclohexyl methacrylate) copolymers	37
Editorial Board	37
Thermal-aging constitutive model for a silicone rubber foam under compression	37
Editorial Board	37
The effect of combined atmospheric plasma/UV treatments on improving the durability of organophosphorus flame retardants applied to polyester fabrics	37
Characterization of the abiotic degradation of oxo-biodegradable polypropylene obtained from transition metal-free pro-oxidant	36
Corrigendum to ‘Influence of water ageing on the mechanical properties of flax/PLA non-woven composites’ [Polymer Degradation and Stability 200 (2022) 109957]	36
Development of a DOPO-based flame retardant with pendant chains for enhanced polyurethane elastomers	35
Co Hybrids modified piperazine pyrophosphate towards efficient flame retardancy, smoke suppression, and high mechanical properties of styrenic thermoplastic elastomer	35
In-depth analysis of potassium peroxysulfate based oxidation of wool fibre by advanced infrared spectroscopy	35
Thermal and flame retardant properties of recyclable disulfide based epoxy vitrimers	35
Enhancing radiation resistance of silicone rubber through the addition of polydopamine-modified cerium dioxide	35
Super-toughed polylactide/poly (butylene adipate-co-terephthalate) blends in-situ compatibilized by poly (glycidyl methacrylate) with different molecular weight	34
Heritage PVC objects: Understanding the diffusion-evaporation of plasticizers	34
Poly(glycolic acid) materials with melt reaction/processing temperature window and superior performance synthesized via melt polycondensation	34
High flame retardant and heat-resistance, low dielectric benzoxazine resin with phthalimide structure	34
Dual-crosslinked starch/carboxymethyl cellulose blend film with ion-responsive dissolution properties	34
Universal circulating impregnation method for the fabrication of durable flame-retardant plywood with low hygroscopicity and leaching resistance	33
Investigation of abiotic degradation of tire cryogrinds	33
Effect of an unsaturated-chain extender on the response of epoxy resins to radiation post-curing	33
Preparation of 4-formylphenylboronic modified chitosan and its effects on the flame retardancy of poly(lactic acid)	33
The role of NaOH in the hydrothermal dehydrochlorination of polyvinyl chloride	33
Polymer-type flame retardants based on a DOPO derivative for improving the flame retardancy of polyamide 6: Preparation, properties and flame retardancy mode of action	33
Synthesis of a charring agent containing triazine and benzene groups and its intumescent flame retardant performance for polypropylene	32
B2O3-reinforced ablative materials with superior and comprehensive ablation resistance used in aerospace propulsion thermal protection systems	32
Corrigendum to ’Recent advances in flame retardant epoxy systems containing non-reactive DOPO based phosphorus additives’ [Polymer Degradation and Stability Volume 200, June 2022, 109962]	32
Preparation of novel flame retardant, smoke suppression and toxicity reduced PAN composite fiber based on biomass phosphononitrile derivative with Cu2+	32
Facile synthesis of soybean protein-based phosphorus-nitrogen flame retardant for poly(lactic acid)	32
Thermal degradation of polylactic acid (PLA)/polyhydroxybutyrate (PHB) blends: A systematic review	32
Promotion of polylactic acid biodegradation by a combined addition of PLA-degrading bacterium and nitrogen source under submerged and soil burial conditions	32
Thermal degradation behaviour of natural fibres at thermoplastic composite processing temperatures	32
A fully bio-based intumescent flame retardant for enhancing the flame retardancy and smoke suppression properties of wood flour polypropylene composites	32
Synthesis of a novel bis(diphenylphosphinyl)-containing pyromellitimide and its application in epoxy resins	31
Editorial Board	31
Pyrolysis mechanism and recycling strategy of end-of-life photovoltaic modules based on the experiment and the density functional theory	31
Effect of nanoparticles and siloxane groups on the atomic oxygen erosion resistance of copolyimides	31
Effect of melt spinning on the integrity of poly(ether ether ketone) for commingled yarn based composite preforms	31
Biodegradability of bacterial cellulose polymer below the soil and its effects on soil bacteria diversity	31
Embedding matrices to extend the shelf life of reference materials 1: Cellulose acetate butyrate	31
Polyelectrolyte as highly efficient flame retardant to epoxy: Synthesis, characterization and mechanism	31
Arc-shaped air layer bioinspired by ginkgo nut to resist high humidity environment for PET fabrics	31
High-performance biobased vinyl ester resin and its fiberglass-reinforced composite with high glass transition temperature (Tg), excellent flame retardancy and mechanical properties	31
Thermal oxidation of blends of polypropylene and polyamide 6/66. Effect of inhibition	30
Recent progress in aging studies of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal nitroplasticizer	30
Group aggregation effect of polyphenolic phosphaphenanthrene macromolecule on enhancing fire safety and toughness of epoxy thermoset	30
The role of diffusion in the hydrolytic degradation of poly(lactic-co-glycolic acid): A molecular perspective	30
Degradation of thermoplastic polymers for fused filament fabrication under (S)TEM electron beam irradiation	30
Dual pH responsive via double - layered microencapsulation for controlled release of active ingredients in simulated gastrointestinal tract: A model case of chitosan-alginate microcapsules containing	29
Synergistic flame retardant coatings for carbon fibre-reinforced polyamide 6 composites based on expandable graphite, red phosphorus, and magnesium oxide	29
Structure and properties of a flame retardant ternary vitrimer regulated by cyclic and long-chain dicarboxylic acids	29
Engineering mycelium fungi into an effective char-forming thermal protection material via alkaline deacetylation	29
Surface modification of carbon dots by boron and phosphorus to construct flame-retardant epoxy resin with high mechanical and low dielectric properties	29
Enhancing the coating durability and electrical stability of fiber composites with SPEEK/PEDOT:PSS permanent coatings: A novel approach	29
Preparation of flame retardant and antibacterial polyacrylonitrile composites based on modified microcrystalline cellulose loaded silver nanoparticles	29
Impact of volatile organic compounds (VOCs) from acrylic double-sided pressure-sensitive adhesives (PSAs) on metals found in cultural heritage environments	29
Polystyrene containing 2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl]ethyl methacrylate with Low Molecular Weight Used As Macroadditive Photostabilizer	29
The reaction mechanism and sulfur evolution during vulcanized nature rubber pyrolysis in the atmosphere of H2O: A ReaxFF molecular dynamics study	28
No business as usual: The effect of smoke suppressants commonly used in the flame retardant PA6.6 on smoke and fire properties	28
Bio-inspired one-dimensional based textile fabric coating for integrating high flame retardancy, antibacterial, toxic gases suppression, antiviral and reinforcement properties	28
In-situ generated SiO2 nanoparticles for heat release reduction and smoke suppression in unsaturated polyester composites	28
In situ EPR investigation of sulfur vulcanization mechanism and ageing process	28
Improved shape stability and ceramifiable properties of ceramifiable polyethylene composites by crystallization reaction	28
Plant-derived p-hydroxyphenylacrylic acid-derived epoxy resins exhibit excellent flame retardancy, hydrophobicity, degradability, and low dielectric loss after curing with bio-based fluorinated Schiff	28
Construction of a sustainable, reactive and phytate-based intumescent flame-retardant for silk textile	28
Hydroxyl radical-initialized polymerization and degradation of N-vinylpyrrolidone in lipid and aqueous environments	28
Regulating the Thermal Behavior of Nitrocellulose by Stable Incorporation of a Green Supramolecular Salt	28
Microstructural evolution of cross-linked polytetrafluoroethylene under gamma irradiation using ultra-small angle X-ray scattering	28
Influence of humidity on the decomposition process of double base rocket propellant	28
Multilayer biodegradable films with a degradation initiation function triggered by weakly alkaline seawater	28

Thermal oxidative aging behavior and lifetime prediction of fluoroether rubber	27
Editorial Board	27
Synthesis phosphorus–sulfur reactive flame retardant for polyamide 66 with high flame retardant efficiency and low smoke	27
Improving the flame retardancy and smoke suppression of ethylene vinyl acetate composites by introducing the hybrid material of Zn/TiO2@AKaol	27
A biphosphophenanthrene structure intumescent flame retardant with superior smoke suppression performance for epoxy resin	27
Thermomechanical response of thermoplastic polyurethane used in MEX additive manufacturing over repetitive mechanical recycling courses	27
Cactus-like structure of BP@MoS2 hybrids: An effective mechanical reinforcement and flame retardant additive for waterborne polyurethane	27
Machine learning framework to predict instantaneous heat release rate of polymer nanocomposites in cone calorimetry	27
Giovanni Camino (1941 - 2024)	27
Fireproofing flammable composites using mycelium: Investigating the effect of deacetylation on the thermal stability and fire reaction properties of mycelium	26
Polyphenylene sulfide for high-rate composite manufacturing: Impacts of processing parameters on chain architecture, rheology, and crystallinity	26
Biomass-derived poly(lactic acid) and poly(3-methyl-1,5-pentanediol sebacate) alternating multiblock copolymers with improved marine biodegradability and mechanical properties	26
Membrane and membrane-integrated processes for nanoplastics removal and remediation	26
Simultaneously boosting the flame retardancy and degradability of poly(lactic acid) composite by phosvitin affiliation	26
Kinetic Study of Paper Waste Thermal Degradation	26
Property evolution and molecular mechanisms of aluminized colorless transparent polyimide under space ultraviolet irradiation	26
Robust charring construction of thermoplastic polyurethane: Cyclotriphosphazene structure bearing alkynyl and its impacts on thermal degradation, burning behavior and toughness	25
Time-dependant degradation of highly cross-linked epoxy due to hygrothermal ageing at three different temperatures	25
Characterization of accelerated hydrolysis degradation of poly (lactic acid) in phosphate buffered saline solution	25
The synthesis and properties of an intumescent zinc-chelated organometallic flame retardant	25
Photodegradation behavior of polyethylene terephthalate analyzed by MALDI-TOFMS and ATR-FTIR microscopic analysis in combination with two-trace two-dimensional (2T2D) correlation mapping	25
Biodegradability of renewable isosorbide and sebacate-based copolyesters	25
Biodegradation of pre-treated low-density polyethylene (LDPE) by Yarrowia lipolytica determined by oxidation and molecular weight reduction	25
The construction of super-tough polylactide/crosslinked polyamide blends by dynamic vulcanization	25
Effects of recycling and hygrothermal environment on mechanical properties of thermoplastic composites	25
Water uptake and interfacial shear strength of carbon/glass fiber hybrid composite rods under hygrothermal environments: effects of hybrid modes	25
The extensional rheology of biodegradable polymers determines their propensity to be film blown	25
Mechanically robust, thermally conductive and flame retardant polydimethylsiloxane composites decorated with a nitrogen/phosphorus-functionalized carbon nanotubes-montmorillonite interconnected networ	25
A high-performance flame retardant liquid synthesized on the basis of DOPO hydrolysis products avoids the defects of DOPO	25
Surface degradation of epoxy resin exposed to corona discharge under bipolar square wave field: From phenomenon to the insights	25
Preparation of eugenol-based flame retardant epoxy resin with an ultrahigh glass transition temperature via a dual-curing mechanism	25
Evolution of crosslinking structure in vulcanized natural rubber during thermal aging in the presence of a constant compressive stress	25
A P/N/S containing flame retardant for epoxy resins with excellent optical, mechanical and flame retardant properties	24
Corrigendum to 'A phosphorus/silicon-based, hyperbranched polymer for high-performance, fire-safe, transparent epoxy resins' [Polymer Degradation and Stability, 203 (2022) 110065]	24
Phytic acid-Fe chelate cold-pressed self-forming high-strength polyurethane/marigold straw composite with flame retardance and smoke suppression	24
Enzymatic hydrolysis of chitinous wastes pretreated by deep eutectic solvents into N-acetyl glucosamine	24
Fire protection of wood with an environmentally benign UV-cured polyelectrolyte complex	24
Surface oxidation of polyhydroxyalkanoate films with different molecular structure via photo-activated chlorine dioxide radical and comparison of the influence on the properties	24
Alginic acid derivatives/DOPO modified epoxy resins: Excellent flame retardancy, mechanical properties, chemical resistance	24
Biocatalytic oxidation of polyethylene by Agrocybe aegerita mycelium	24
Raman spectroscopic observation of conformational changes during thermal exposure and its effects on melting and crystallization behavior of high-density polyethylene	24
Weathering resistance (UV-shielding) improvement of a polyurethane automotive clear-coating applying metal-organic framework (MOF) modified GO nano-flakes (GO-ZIF-7)	24
Fabrication of talc reinforced transparent fire-retardant coating towards excellent fire protection, antibacterial, mechanical and anti-ageing properties	24
Enhancing PANox fiber properties through controlled oxidation and tensioning: A study on shrinkage inhibition and structural analysis	24
Editorial Board	24
N2O deconstruction of polycyclooctene to generate carbonyl-functionalized macromonomers	24
Enhanced thermo-oxidative aging properties of CFRP composites by construction of heat resistance interface and interphase through waterborne polyamic acid sizing	24
Molecular dynamics between amorphous and crystalline phases of e-beam irradiated piezoelectric PVDF thin films employing solid-state NMR spectroscopy	23
High toughness, UV & blue light shielding and antibacterial bio-based PEF/TiO2 nanowires composites for packaging application	23
Enhanced flame retardancy and smoke suppression of thermoplastic polyurethane membrane via “two-phase” synergistic effect	23
Creep behavior of epoxy adhesives subjected to different hygrothermal aging conditions—nanoindentation creep tests and theoretical study	23
A highly flame-retardant, agile fire-alarming and ultrasensitive cotton fabric-based piezoresistive sensor for intelligent fire system	23
Remarkable effects of silicone rubber on flame retardant property of high-density polyethylene/magnesium hydroxide composites	23
Surface photooxidation of polypropylene-based photovoltaic backsheets: A comprehensive spectroscopic investigation	23
Thermal ageing of flame-retardant high-density polyethylene designed for railway application	23
Structure and stable isotope ratios of ancient and artificially aged silk fabrics	23
Metathetic degradation of waste vulcanized emulsion type butadiene-based rubber	23
Phosphorus/boron-containing, flame-retardant polyurethane elastomers with great mechanical, shape-memory, and recycling performances	23
Microwave-Assisted oxidative degradation of poly(vinylidene fluoride-tetrafluoroethylene-hexafluoropropylene): Preparation, characterization, and reaction mechanism	23
Melt-state degradation mechanism of poly (ether ketone ketone): the role of branching on crystallization and rheological behavior	23
Construction of a binary architecture of flower-like nickel phyllosilicate@zinc sulfide towards the robust, wear-resistant and thermal-stable epoxy nanocomposites	23
Catalyst-free reprocessable, degradable and intrinsically flame-retardant epoxy vitrimer for carbon fiber reinforced composites	23
Understanding water absorption effect on molecular dynamics, microstructures and relaxation behavior of segmented polyurethane elastomers	22
Construction of functional epoxy resin coatings based on acid-doping polyaniline coated APP: Preparation, characterization and properties	22
Surface modification of nitrocellulose by interfacial self-assembly of metal-phenolic network for enhanced thermal stability and eco-friendly propulsion energy	22
A highly efficient intumescent polybutylene succinate: Flame retardancy and mechanistic aspects	22
Ion – complexed chitosan formulations as effective fire-retardant coatings for wood substrates	22
Dynamic covalent bonds of hemiacetals and acetals enables reprocessability and raw material recyclability of high performance cellulosic thermosetting resins	22
Characterization of the polyhydroxyalkanoate (PHA) synthase from Ideonella sakaiensis, a bacterium that is capable of degrading and assimilating poly(ethylene terephthalate)	22
Degradation of sunlight exposure on the high-density polyethylene (HDPE) pipes for transportation of natural gases	22
Editorial Board	22
New insight into degradation mechanisms of conductive and thermally resistant polyaniline films	22
Cobalt ions loaded polydopamine nanospheres to construct ammonium polyphosphate for the improvement of flame retardancy of thermoplastic polyurethane elastomer	22
Preparation and property analysis of chemically regenerated polyethylene terephthalate with improved chromaticity	22
Fire-safe and mechanically robust polycarbonate composite enabled by novel copolymerization/macromolecular blending strategy	22
Fabrication of low-density poly(lactic acid) microcellular foam by self-assembly crystallization nucleating agent	22
Photocatalytic degradation of polystyrene under mild conditions by nanostructured bismuth carbonate	21
Simultaneous enhanced mechanical properties, processability and flame retardancy of thermoplastic vulcanizate composites by a binary block copolymer with morphology adaptability	21
Improvement of water resistance for natural rubber/nanocellulose composites	21
Anti-corrosive and UV-resistant three-dimensional epoxy coating based on reduced graphene oxide, modified carbon nanotubes, modified fullerene, and 2-(2′-hydroxy-5′-methylphenyl) benzotriazole for pol	21
Efficient mineralization of ethylene-tetrafluoroethylene copolymer in superheated water with permanganate	21
Optimal design of energy-saving foam with multifunctional characteristics: Superb flame retardancy, outstanding hydrophobic, excellent thermal insulation and robust mechanical performances	21
The behavior of antioxidant irganox 1010 during the thermal degradation of a plastic bonded explosive	21
Layer-by-layer coated cellulose reduces the fire risk of polyurethane foam biocomposites	21
Improving poly(lactic acid) fire performances via blending with benzoxazine	21
Finite element modelling of the oxidation gradients of epoxy-diamine matrices below and above their glass transition temperature	21
Robust cross-linked polyurethane elastomers with reprocessing capabilities and flame-retardant from renewable vanillin	21
Enzymatic degradation mechanism of the lamellar stacking structures of poly([R]-3-hydroxybutyrate-co-[R]-3-hydroxyvalerate) fibers	21
Evaluation of the eco-compatibility of polyamidoamines by means of seed germination test	21
Thermal stability of polymethacrylic based ELIUM® resin: Effect of comonomers, antioxidants and aluminum trihydrate filler	21
Influence of surface chemical modifications on enhancing the aging behavior of capacitor biaxially-oriented polypropylene thin film	20
Natural resin-derived urushiol-based phosphorylation derivative towards flame-retardant and mechanically strong epoxy resin	20
Understanding seawater-induced fatigue changes in glass/epoxy laminates: A SEM, EDS, and FTIR study	20
Effect of processing conditions on the properties of vitrimerized polybutylene terephthalate prepared by reactive extrusion	20
Use of fly ash as synergistic and reactive component of flame retardant system in polylactide	20