Separation Science and Technology

Papers
(The TQCC of Separation Science and Technology is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Development of a magnetic solid phase extraction method for gemcitabine from rat plasma by using magnetic graphene oxide calix[6]arene composite and its application to pharmacokinetics52
Integration of coagulation-flocculation process for improved solid–liquid separation of anaerobically treated textile effluent52
Separation of rare earth elements from waste NdFeB magnets: The influence of hematite seeds and agents on the hematite precipitation in nitric acid medium41
Biogenic, sustainable nano-ZVI@biochar for removal of Pb 2+ : Study of biorefinery of apple peel34
Fabrication of bio-polymer-based hydrogel for methylene blue remediation: Kinetics, mechanisms, and environmental implications31
Ionic liquid promoted extraction of gold(III) from electronic waste: a modeling study28
Optimizing rare earth element beneficiation using response surface methodology and Knelson concentrator27
Optimization of the separation chamber structure of a pneumatic dry low-intensity drum magnetic separator based on a multi-physical field coupling model26
Gas permeability and mechanical properties of polyethylene films subjected to ultraviolet irradiation25
Enhancement of CO 2 absorption/desorption efficiencies of aqueous methyl-diethanol amine (MDEA) via compounding with sulfolane and graphitic carbon nitrides (CNNs)25
Flotation assessment and adsorption mechanism of wulfenite with three anionic collectors24
Separation and preparation of level I standard lead concentrate from lead ore via S-HGMS technology: description of separation mechanism24
Ionic liquids based azeotropic separation of refrigerants R410A (R32+R125) and R508B (R23+R116) through hybrid extractive distillation24
Sequestration of Mecoprop herbicide from water using XAD-4 resin impregnated with Aliquat 336 and quantification with Liquid Chromatography-Tandem mass spectrometer (LC-MS/MS)23
Selective modulation of surface properties of magnesite and calcite by a novel calciphilic depressant EGTA22
Effects of structure and chemistry on electrochemical transport properties of anion exchange membranes for separation of CO222
Concentration of oxidized Brazilian zinc ore by flotation: comparative study between anionic and cationic routes21
Exploring the effect of aeration intensity on a modified PVDF-PEG membrane incorporated with nano-MgO: antifouling and AnT-POME treatment21
The relationship between spodumene surface pretreatment and flotation behavior: A review20
Analysis of the adaptability of marine hydrate in-situ separator for sand removal to production volume20
A novel approach for pre-concentrating titanium from Ti-bearing blast furnace slag19
Electrocoagulation as an efficacious technology for the treatment of wastewater containing active pharmaceutical compounds: a review19
Eco-friendly CO2 adsorption by activated-nano-clay montmorillonite promoted with deep eutectic solvent18
Liquid-liquid extraction of n -butanol and n- butyl acetate with ionic liquid and thermodynamic modeling with COSMO-RS and NRTL17
Enhancing essential oil yields from citronella ( Cymbopogon winterianus ) and Rosemary ( salvia rosmarinus ): An ultrasonication-assisted 17
Interaction of induced magnetic field, double diffusion convection and multiple slips for thermal radiative biological flow of six-constant Jeffreys nanofluid: Advancements in mechanics17
The effects of TiO2 nanoparticles and polydopamine on the structure, separation, and antifouling properties of PPSU membrane17
Adsorption of Cr (VI) ion from aqueous solution on acrylamide – grafted starch (Coccinia abyssinicca) – PVA/PVP/chitosan/graphene oxide blended hydrogel: isotherms, kinetics, and thermodynamics studie17
Effective flotation separation of brucite and serpentine using eco-friendly PCE-11 as a novel regulator16
New corona-electrostatic separator with two coaxial vertical cylindrical electrodes for sorting conductors and non-conductors from granular mixtures16
Enhanced boron recovery by a new synthesized polyvinyl alcohol anchored gallic acid moiety via ethyl carbamate linker15
Electrowashing of microalgae Arthrospira platensis filter cake14
Investigating the effects of sacrificial agents on MO dye degradation with Ag 2 Se nanocomposites via chemical wet method using visible light irradiation14
Removal of Cr(VI) from wastewater by M-HAFAC based on modified fly ash13
Water quality improvement using novel attached growth systems13
Preparation and characterization of agarose-encapsulated ceramic hydroxyapatite particles for flow-through chromatography13
Arsenic pre-removal from antimony oxide powder by roasting with pyrite (FeS2) for decreasing arsenic transfer and pollution in the followed antimony smelting process13
Strategies for enhancing molybdenum sorption from aqueous solutions using aluminum-based sorbents12
Ultrafiltration and diafiltration modeling for improved whey protein purification12
In-situ generation of H2O2 in heterogeneous Fenton-like process with Fe/Ni bimetallic particle for Metronidazole degradation12
Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies12
Selective removal and simultaneous immobilization of Pb cations from solutions12
Unraveling complexation and separation of novel asymmetric uranyl-5-methoxy-2-(4-methoxy-6’-(quinazolin-2-yl)-[2,2’-bipyridin]-6-yl) quinazoline to chiral fungicides R/S-metalaxyls and R/S-benalaxyls12
Evaluating CO2 capture performance by adsorption using synthesized and commercial activated carbon12
Study on the separation and quality improvement of <6 mm low rank high sulfur lignite by vibration airflow dry separation bed11
Efficiency of magnetic immobilization for recombinant Pichia pastoris cells harvesting over consecutive production cycles11
Value-added utilization of silicon and iron in copper smelting slag11
Treating hydraulic fracturing produced water by electrocoagulation11
Developing N,N,N’,N’-tetra (2-ethylhexyl) diglycolamide encapsulated polymeric beads as promising rare earth extracting agents11
Evaluation of low-gravity-solids sedimentation in non-Newtonian synthetic-based drilling fluids monitored by gamma-ray attenuation technique11
Nitrogen-containing multifunctional copolymers as reagents to sorb rare-earth metals11
Engineering ZIF-8 Hybridization by Extracted Lignin with Antibacterial Property for Uptake of Methomyl Residues from Wastewater11
Flow field analysis and performance evaluation of a hydrocyclone coalescer11
Influence of low and high dosages of methyl and propyl parabens on membrane bioreactor (MBR) performance10
Development of a Manganese Dioxide-Decorated Activated Carbon Nano-sorbent via Co-precipitation method for efficient lithium ion adsorption from aqueous solutions10
Trivalent chromium ion removal from synthetic wastewater using graphene oxide nanocollector by various flotation mechanisms10
Electrochemical oxidation treatment of Direct Red 23 aqueous solutions: Influence of the operating conditions10
A systematic study for the removal of anionic dyes by sepiolites modified with a homologous series of trimethylammonium-surfactants from single and binary component solutions10
Application of 2-D population balance equation for modeling of an industrial spiral-type gravity coalescer10
Improving micro-fine mineral flotation via micro/nano technologies10
Post-irradiation characterization of low burn-up UZr metal fuel: Evaluation of uranium, zirconium, fission and activation products10
Experimental investigation of reactive extraction of p-hydroxybenzoic acid using TOA in toluene, petroleum ether and MIBK9
The design and optimization of square cascades by PSOA and GOA to provide fresh fuel for a nuclear power reactor9
A facile synthesis of bimetallic Ni/Co-BTC hollow MOFs for effective removal of congo red9
Insights into the impact of Cattaneo-Christov heat flux on bioconvective flow in magnetized Reiner-Rivlin nanofluids9
Effect of mechanical activation on the hypochlorite leaching of Sarcheshmeh molybdenite concentrate9
Do mono- or diphenol substitutions in phenanthroline-based ligands serve in effective separation of Am3+/Eu3+ ions?- Insights from DFT calculations9
Accurate prediction of pore size distribution in hemodialysis membranes based on gel permeation chromatography9
Characterization of sulfamethoxazole biosorption by Rhizopus oryzae biomass: Insights into sorption mechanism9
Demulsification performance of an electrostatic coalescer with novel cylinder–plate electrodes9
Potential of phragmites australis in vertical flow constructed wetland for heavy metals removal from urban wastewater9
Implementation of response surface methodology for separation of methylene blue dye from wastewater using foam fractionation technique8
Aqueous biphasic separation of 61 Cu from nat Co8
Improving anti-fouling properties of alumina tubular microfiltration membranes through the use of hydrophilic silica nanoparticles for oil/water separation8
Study on vapor-liquid equilibrium and azeotropic distillation simulation of fluorene- dibenzofuran system8
Effect of support and NiO loading on adsorptive desulfurization of diesel fuel8
Static and dynamic sorption of DOM on Bond Elute PPL and Bondesil PPL sorbents: physical-chemical characteristics8
Kinetic study of Mn and Zn dissolution from waste Zn-C batteries by shrinking core model8
Drug removal and release studies of mesoporous and modified silica8
Recovering levulinic acid by adsorption using efficient basic anion exchangers8
Sustainable and Circular Adsorption of Anionic Dye from Textile Wastewater Using Economical Adsorbent8
Removal of sulfadiazine from aqueous solution by magnetic biochar prepared with pomegranate peel8
Continuum in surface complexation mechanism of selenium oxyanions at the goethite–water interface: Role of interfacial water molecules8
How far can membrane characteristic parameters bestow at the vacuum membrane distillation (VMD) performance: Modeling and simulation8
Extractive desulfurization of thiophene by tetraethylene glycol at T = 298.15 to 313.15 K and liquid–liquid phase equilibrium study7
Adsorption of cadmium (II) from aqueous solutions by coconut dregs residue: Kinetic and thermodynamic studies7
Lead removal from natural zeolite through optimized HCl leaching using response surface methodology7
Effects of thermal and momentum slip on magnetized viscoplastic fluids: A study using non-Darcy drag and Rosseland approximation7
Optimization of operational parameters in air-gap membrane distillation using central composite design applied in recovery of dye manufacturing wastewaters7
Removal of antibiotics from pharmaceutical wastewater using Lemna Aoukikusa (duckweed)7
Simultaneous separation of uranium and thorium as their quinic acid complexes using ion interaction chromatography7
Durable photocatalytic membrane of PAN/TiO2/CNT for methylene blue removal through a cross-flow membrane reactor7
Relaxation modes in a smart system: weakly charged microemulsion and polyelectrolyte7
Utilization of the mixture of ethylene tar and different petrochemical by-products as collectors for coal flotation7
Methyl blue removal by Na 2 Al 2 B 2 O 7 modeled with artifi7
A hybrid of RSM, ANFIS, and machine learning algorithm approach for ultrasound-assisted extraction of bioactive compounds from Semecarpus anacardium Linn7
An investigation on grinding behavior of pyritic copper ores7
Continuous separation of cobalt from sulphate solutions using saponified D2EHPA and Cyanex 272 in a Taylor-Couette Disc Contactor7
A novel carbon-based material recycled from end-of-life tires (ELTs) for separation of organic dyes to understand kinetic and isotherm behavior7
Synthesis and characterization of pectin-xanthate and their application in heavy metal and lignin enriched paper industry wastewater treatment7
Comprehensive study of Acid Yellow 42 adsorption by green synthesized polypyrrole/tannicacid/iron nanocomposites7
Molecularly imprinted composite discs for transferrin recognition7
Optimization of Triterpenoid Extracted from Vietnamese Ganoderma lucidum via Supercritical Extraction Method and Biological Tests6
Evolution of extraction technique for the separation of bioactive compounds from Aegle marmelos6
A simple method for developing efficient room temperature reduced graphene oxide-coated polyurethane sponge and cotton for oil-water separation6
Performance of crosslinked bentonite-biocarbon electrodes for chromium mitigation through electrosorption6
Comments concerning papers about cationic dyes sorption, published by Saeed et al. (2023), Tan et al. (2023) and Yıldız et al. (2023)6
Adsorption of uranium by amination mesoporous molecular sieve HMS, using response surface methodology6
Removal of Reactive Blue 19 from simulated textile wastewater by Powdered Activated Carbon/Maghemite composite6
Role of surface chemistry of activated carbon for anchoring iron particles by forced hydrolysis and evaluation of iron-loaded adsorbents for Cr (VI) adsorption6
Correction6
Recovery of energy values from high-ash content washery tailings using waste oils by oil agglomeration6
Hexavalent chromium scavenging performances of one-pot synthesized hydrous cerium-copper-mixed oxide from contaminated water with plausible mechanism6
Phosphate abatement using calcium silicate hydrate synthesized from alum factory solid waste residue6
Selective extraction of molybdenum (VI) with novel ionic liquid from nitric acid solution6
Selective extraction of heavy metals from sewage sludge via combined process of acid leaching and ion exchange resins adsorption: Optimization and performance evaluation6
Studies on application of Petcoke-based graphene membranes for CO 2 separation6
Mechanical characteristics of magnetite as a function of particle size during column-based magnetic separation6
Geopolymer-zeolite and geopolymer- iron (III) ion exchanged zeolite pellets as highly regenerable CO 2 adsorbents6
Parametric optimization of Sm(III) extraction from nitrate media by employing hollow fiber membrane using Taguchi analysis6
Synthesis and characterization of allyl mannitol cross-linker based novel hydrogel for capturing of toxic metal ions from aqueous solution6
Improving microfiltration efficiency of fruit beverages through backpulsing: Impact on permeate flux, cost-effectiveness and bioactive compounds retention6
Solvent extraction of acetic acid from aqueous solutions: A review6
Carbon dioxide delivery and resulting biomass separation in microalgae cultivation using triethanolamine6
Highly selective separation of plutonium using a mono-amide-based supported liquid membrane5
Online study on Hg 2+ separation from base metals by selective stripping from cation exchange fiber and application to Hg analysis5
Separation of CO 2 and TFE by using diethanolamine and diisopropylamine5
Pre-concentration of quartz from sea sand through superconducting high gradient magnetic separation technology5
Assessment of aggregation, growth, and strength of flocs using photometric dispersion analyser (PDA) in electrocoagulation of leachate with intensified microbubbles5
Boosting polymeric hollow-fiber membrane gas separation process by evaluating its performance utilizing AI algorithms5
Montmorillonite based copper oxide nanoparticles for the efficient remediation of phosphate and anti-bacterial activity against gram-negative bacteria5
Chromatography separation of minor actinides from Ln 3+ rich high-level radioactive liquid waste (HLW) using bis-triazinyl-pyridine (BTP) resin5
Structural selective regulation of Fe 3 O 4 @C composite as adsorbent for removing different organic pollutants5
Graphene oxide assisted solvent for enhancing the coupled ultrasonic extraction process of curcumin from Curcuma longa L5
A novel sulfonated polybenzothiazole-based adsorbent for simultaneous capture of organic dyes from aqueous solution5
Studies on the extraction and separation of strontium by bisamide podand from high-level liquid waste5
Pre-concentration of REE values from nepheline syenite rocks of western Odisha, India5
Development of a process for extracting rare earth elements from phosphogypsum by dissolving them in deep-eutectic solvent5
Alginate caged graphene oxide -modified metformin beads for the removal of Arsenic (III) and (V) from aqueous media; kinetic and equilibrium, thermodynamic studies5
Trace isolation and photometric determination of cadmium ions in water using thermally reduced graphene-modified hybrid sol-gel composite5
Recovery of astaxanthin from Antarctic krill ( Euphausia superba ) waste by using thermo-reversible ionic liquid-water systems: Phase behavior, extraction and residue ut5
New promising phosphorus-containing sorbents for rare earth metals5
Ultrasound assisted antisolvent crystallization of sulphathiazole5
Aminated cellulose-GO-Doped manganese ferrite Nanosorbent with Enhanced adsorption properties of Diclofenac: Isotherm, kinetic, and Thermodynamic Study5
Facile preparation of reduced graphene oxide for removing tetracycline from water: Kinetics and thermodynamics studies5
Second or pseudo-second-order model for adsorption kinetics?5
A model for purification of by-products in wood extracts based on frontal chromatography5
Optimization of the marine microalgae Nannochloropsis oculata harvesting by flocculation: Effects on biomass quality and residual medium reuse for a new cycle5
Amino-functionalization of PVA/TiO 2 -CeO 2 nanohybrid adsorbent for the removal of selenium ions from aqueous solutions: Equilibr5
Simultaneous determination of flouride, iodate and iodide by ion chromatography in caustic off-gas scrubber of nuclear recycle facilities by employing dual detectors5
Aluminum dissolution processing for high-level waste sludges5
Numerical simulation study on the structure optimization of liquid separation device in supersonic separator5
Desalination membranes by deposition of polyamide on polyvinylidene fluoride supports using the automated layer-by-layer technique5
Potential of microwave-assisted hydrothermal modification for enhanced fly ash adsorption capacity toward to heavy metals: A comprehensive investigation of adsorbent characterization, isotherms, kinet5
Efficient removal of antimony from aqueous solution using Al-doped Fe 3 O 4 nanoparticles: adsorption behavior and kinetics study5
Synergistic adsorption performance from binary and ternary composites comprising ZnO, PVA, and crab shell chitosan for azo and non-azo dyes5
Extraction and separation of chromium from the solution after hydrolysis precipitation of vanadium5
Efficient removal of non-steroidal anti-inflammatory ibuprofen by polypyrrole-functionalized magnetic zeolite from aqueous solution: kinetic, equilibrium, and thermodynamic studies5
Efficient water removal from water-in-oil emulsions by high electric field demulsification4
Optimization of hot methanol extraction parameters for high-yield recovery of phenolics and anthocyanins from Roselle4
Effects of coexisting nickel ions on properties of spinel synthesized in wastewater containing chromium and insight into the effect mechanism4
Development of ion imprinted based magnetic nanoparticles for selective removal of arsenic (III) and arsenic (V) from wastewater4
Heavy metal adsorption from phosphoric acid 29% P 2 O 5 with Amberlite IRC200 Na resin4
Electrochemical treatment of two health-care wastewaters – A comparative study4
Purification of Diatomaceous Earth using Acid Leaching Process to Produce High Purity Silica for Solar-Grade Silicon4
Purification and characterization of the pancreatic proteolytic enzymes trypsin and chymotrypsin from the Kamori goat of Sindh, Pakistan, using ion-exchange chromatography4
Magnetically recyclable mesoporous carbon/zirconia composites for highly efficient removal of Cr(III) organic complexes from high salinity water: adsorption behavior and mechanism4
Comprehensive performance and numerical analysis of pressure swing adsorption process-based medical oxygen concentrators under various operating conditions4
A newly proposed isotherm model to predict Cs exchange with crystalline silicotitanate in tank waste simulants4
Separation of isoprene from biologically-derived gas streams4
Investigation of the induction time and recovery in a flotation column: A kinetic analysis4
Experimental and molecular dynamic simulation studies of landfill contaminated groundwater remediation by graphene oxide coated zeolite4
Effects of inorganic cations on the adsorption energy, electrostatic energy and adsorption strength of filter aid on flotation clean coal4
Technology selection and process development for enhancing water recovery from mine tailing water: A case study4
Mixed matrix membranes based on MIL-100(Cr) for removal of N 2 from CH 44
Leaching kinetics of impurity removal from aphanitic graphite by HCl leaching4
Experimental investigation and mathematical modeling of starch extraction from fixed, expanded and fluidized beds of potatoes4
Influence of different type of inlet pipe on the separation characteristic of double-field coupling demulsification and dewatering device4
Extraction of diterpenes from spent coffee grounds and encapsulation into polyvinylpyrrolidone particles using supercritical carbon dioxide4
Gravity separation by falcon concentrator- an over review4
Decoding the beneficiation of ultra-fine scheelite values from gold mine tailings: mineralogical investigation and flowsheet development4
Rapid and Efficient SpPRE Approach: A Step Towards Meeting High Demand of Bioactive Swertiamarin4
Targeted uranium recovery: Leveraging tri-isoamyl phosphate encapsulated polyethersulfone composite beads for efficient recovery from acidic solutions4
Kinetic modeling of the removal of phenolic compounds from olive mill wastewater by hierarchical zeolite/carbon nanotubes: Isotherm, kinetics, and thermodynamic4
Techno-economic feasibility of real tannery wastewater treatment using electrocoagulation and electro-Fenton like processes with titanium electrodes4
Mechanistic insight into cefuroxime sodium (CXM) by sepiolite-rich dolomite4
Mathematical model of using CVD technology4
Fe3O4@MnO2inorganic magnetic sorbent: Preparation, characterization and application for Ru(III) ions sorption4
Performance evaluation and life cycle assessment of electrokinetic technology with various types of electrodes for the treatment of Co-contaminated soil in brick industry site4
Green functionalization of clinoptilolite with MgO nano-platelets as adsorbent for different species of antibiotic residuals (levofloxacin, ciprofloxacin, and pefloxacin); equilibrium studies4
Kinetics, thermodynamics, and optimization analyses of lipid extraction from discarded beef tallow for bioenergy production4
A rheological study on nano-bubble assisted flotation of phosphate fine particles4
Recovering AlN from secondary aluminum ash using a novel triboelectric separation4
Mechanism analysis on carbon-ash separation of coal gasification fine slag by high internal phase emulsion collector4
The impact of particle deposition on the vibration of a disk stack separator – development of a soft-sensor for determining the separation efficiency4
Thorough assessment of a crucial element pertaining to the distribution and average dimensions of droplet sizes in a solvent extraction column4
Correction4
Ternary polymeric beads of chitosan-based polyaniline doped iron oxide used for removal of cadmium and lead ions from water: Kinetic, isotherm and mechanism studies4
Facile fabrication of a CuO/NiO-biomass heterostructure micro-/nano-composite for the adsorptive removal of methylene blue from wastewater4
0.068461894989014