Solid State Ionics

Article	Citations
The synthesis of Eu–Tb–Ho co–doped Bi2O3–based ceramic powders for use in intermediate temperature–SOFCs	73
Microscopic insights on ion transport in Li3OCl1−Br anti-perovskites from metadynamics simulations	61
Preparation of grain-aligned polycrystal of doped lanthanum silicate oxyapatite by templated grain growth method and evaluation of its structural and electrical properties	54
Excellent stability of layered Na0.67Ni0.33Fe0.33Mn0.33O2 cathode materials with P2/O3 biphasic system in humid ambient air	49
Enhancement of microstructure and electrochemical properties of LLZTO solid state electrolyte by co-doping with Ga and Y	49
Editorial Board	43
High nickel-rich layered oxide: The intrinsic role of cation substitution and metal-oxide coating in tuning cationic mixing and enhancing electronic conductivity	40
Ball-milling synthesis of low-water and phase-stable Prussian blue for sodium-ion batteries	39
A facile route to unlock the high capacity of molecular organic cathode for aqueous zinc-ion battery	37
Electrochemical stability of a NASICON solid electrolyte from the lithium aluminum germanium phosphate (LAGP) series	36
Solid-state polymer magnesium supercapacitor	34
Tunable grain boundary conductivity in sodium doped high entropy oxides	32
Quantitative assessment of enhanced performance of Ru-loaded direct ammonia proton ceramic fuel cells	31
From setup to analysis: A compact guide to performing Molecular Dynamics simulations of ion transport in solids	31
A review of proton migration and interaction energies in doped barium zirconate	30
Composite solid electrolyte with improved ionic conductivity and high lithium transference number through reduced PVDF-HFP crystallinity	30
Controllable synthesis of nitrogen-containing core-shell carbon spheres with a gap for enhanced lithium-ions storage	30
Unveiling the aging memory effect in Lithium-ion batteries: A thermodynamic approach	29
Construction of conductive PTh-promoted NaTi2(PO4)3 nanocomposite with two-electron reactions for sodium energy storage	28
Hydride prediction during late-stage oxidation of uranium in a water vapour environment	28
Interfacial corrosion behavior between O atoms and alloy elements at iron-liquid LBE interface by first-principles molecular dynamics	28
Effects of material fabrication and current collector on the total conductivity of doped barium zirconates	27
Origin of over-cycling tolerance achieved by metal phosphate coating for transition metal oxide lithium-ion batteries	26
Editorial Board	26
Effect of yttrium ion on the space charge potential across grain boundaries regions of gadolinia-doped ceria electrolytes	25

Editorial Board	25
Influence of Germanium oxide nanoparticles on the electrical conductivity of Li-ion conducting NaCMC/PVA nanocomposite films	24
Editorial Board	23
Free volume structure at interphase region of poly (ethylene oxide)-Al2O3 nanorods composites based solid polymer electrolyte and its direct correlation with Li ion conductivity	23
Organic weak acid pretreatment enables surface-engineered Li-rich cathodes with suppressed voltage decay and enhanced kinetics	22
Influence of TiC particles on grain boundary structure and solute atomic diffusion in TiC/Al-Cu composites	22
Conductivity of 2-adamantanone with lithium bis(trifluoromethanesulfonyl)imide: Impact of residual solvent and temperature	22
Synergistic effect of co-sputtered tungsten-titanium nitride as electrode material for efficient hybrid supercapacitors	22
Exploring a metal coated by M-graphene as an encouraging anode electrode material for sodium-ion batteries using DFT calculations	21
Perovskite SrCo0.5Fe0.25Cu0.2Nb0.05O3-δ cathode for intermediate-temperature solid oxide fuel cells: Improved working stability and CO2 tolerance	21
Hydrated doped-BaZrO3 proton conductors studied by positron annihilation lifetime spectroscopy	21
Kinetic and transport characteristics of LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries	21
Proton conducting zeolite composite membrane boosts the performance of vanadium redox flow battery	21
Oxide ion conductivity in doped bismuth gallate mullite type oxide, Bi2Ga4O9	21
Cerium oxide as cathode material for aqueous zinc-ion battery	20
Mixed hydride-electronic conductivity in Rb2CaH4 and Cs2CaH4	20
Polyelectrolytes based on Nafion for lithium rechargeable batteries	20
Enhancement of the Na2FePO4F@gC3N4 electrochemical performance in view of its implementation in sodium-ion batteries	20
Fluoride-ion conductivity of scheelite-type LiYb1-MF4± (M = Mg, Ca, Sr, Hf)	19
Reversible lithium insertion and conversion process of amorphous VS4 revealed by operando electrochemical NMR spectroscopy	19
An extended finite element method for the Nernst-Planck-Poisson equations	19
Tracer diffusion coefficients measurements on LaPO4-dispersed LATP by means of neutron radiography	19
First-principles study on haeckelite hexagonal monolayer with high specific capacity for sodium-ion battery	18
Anode supported planar 5 × 5 cm2 SrZr0.5Ce0.4Y0.1O2.95 based solid oxide protonic fuel cells via sequential tape-casting	18
Interface evolution of lithium metal anodes in all-solid-state batteries via mechanical–electrochemical investigations	18
Editorial Board	18
The electrochemical performance of electrodeposited nickel foam electrodes coated by nano-confined lithium borohydride-metal oxides composites	17
Editorial Board	17
Prospective oxygen-ion conductors Ln X O : Geometry and energy calculations	17
Editorial Board	16
Effect of partial pressure of oxygen, target current, and annealing on DC sputtered tungsten oxide (WO3) thin films for electrochromic applications	16
SnO2/carbon dots nanocomposite synthesized by one-pot solvothermal technique for high-sensitivity triethylamine gas sensors	16
Proton conduction in tetra-n-butylammonium bromide semiclathrate hydrate	16
Ethylene carbonate plasticized polymer electrolyte for chloride ion batteries with enhanced reversible capacity	16
Defect-independent migration of Li on C3B for Li-ion battery anode material	16
A novel strategy for capacity judgement of hard carbon in sodium-ion batteries: Ensuring the consistency of the available anode capacity between half-cell and full-cell	16
A new boundary condition forging the unprecedented self-consistence of galvanostatic intermittent titration technique	16
Chemical expansion of La3+ and Yb3+ incorporated Zr-doped ceria ceramics for concentrated solar energy-driven thermochemical production of fuels	16
First-principles study on electronic properties and lattice configurations of Ni3S2/LiAlO2 interface towards lithium ions storage	15
Deciphering structural changes in LiNixMnyCozO2 cathodes of Li ion batteries during cycling: Experimental and theoretical investigations	15
Multi-component polymeric membranes based on acrylamide monomers for fuel cells	15
Synergistic effects of halloysite nanotubes in electrospun PVDF-HFP separator for advanced sodium ion battery	15
Co-doped PVA-borax anodic supercapacitors with high capacity and self-healability features	15
Editorial Board	15
High concentrations of sodium dodecylbenzene sulfonate electrolyte additives improve the performance of aqueous zinc ion batteries	15
Effect of LiNbO3 surface dry-coating on the air stability of Ga-doped LLZO solid electrolytes	15
Electrochemical investigations of PVdF-HFP-NaTFSI-[BMPYr][TFSI] polymer-salt-IL electrolyte for Na-rechargeable battery	15
Rational molecular design of partly fluorinated fuel cell membranes with high proton conductivity under low-humidity conditions	15
Calcium substitution to improve the total ionic conductivity of the Li3/8Sr7/16Ta3/4Hf1/4O3 perovskite-type electrolyte	14
The extraction of hopping frequencies of mobile fluorine ions in the superionic conductor Ba0.5La0.5F2.5 from electrical modulus spectroscopy data	14

Polymer electrolyte based on Nafion plasticized with carbonates and their ternary mixtures for sodium-ion batteries	14
Implementation of highly crystalline polyketones as solid polymer electrolytes in high-temperature lithium metal batteries	14
Synthesis and ionic conductivity of Li boracites, Li4B7O12Cl and Li4B4Al3O12Cl1-Br	14
Sodium ion conductivity of hexagonal layered P2-type phases with multiple cationic substitutions	14
Editorial Board	14
Effects of depth of discharge on the electrochemical performance of LiFePO4-graphite pouch cells	14
Understanding interfacial reactions and electrochemical performance of MoS2 cathodes with laponite-based solid polymer electrolytes	14
Novel oxygen-ion conductors Ln10W22O81 (Ln = La, Ce, Pr, Nd)	14
The influence of the volume concentration of hydrogen on the fine structure of the IR absorption spectra and conductivity features in congruent LiTaO3 crystals	14
New insight into the dual-dissociation effect of POSS fillers with suitable aperture for solid-state polymer electrolytes	14
First-principles study on the electronic, magnetic, and Li-ion mobility properties of N-doped Ti2CO2	14
Comprehensive study of conductivity in the series of monoclinic oxymolybdates: Ln2MoO6 (Ln = Sm, Gd, Dy)	14
All-solid-state lithium-sulfur batteries assembled by composite polymer electrolyte and amorphous sulfur/rGO composite cathode	14
One-step synthesis of the CoO nanoarrays anchored on nickel foam as a three-dimensional current collector for lithium‑sulfur batteries	13
Single oxygen vacancy in BaCoO3: Hybrid DFT calculations and local site symmetry approach	13
Flexible piezoresistive sensors with high sensitivity and ultra-wide pressure range based on alkalized MXene	13
Native point defects and polaron transport in zirconium pyrovanadate	13
Rambutan-like Na4MnCr(PO4)3@C/CNTs as a high-energy-density cathode for sodium-ion batteries	13
(Fe, Ni)-ZIF-8 derived sp2-C-rich carbon as surface coating for enhancing commercial LiFePO4 performance	13
Pathways for Li+ migration in Li1+xV3O8: Geometrical-topological analysis	13
Optimization of superionic conductivity in batteries with solid-state electrolytes	13
Sulfur-doped porous carbon derived by metal-organic framework (MOF-5) for high lithium/sodium storage performance	13
Effect of cold sintering on the sintering shrinkage matching of NiO-GDC anode with GDC electrolytes in making anode-supported solid oxide fuel cells	13
The partial electronic conductivity of lithium halides and their role in SEI formation in solid-state batteries – Hebb-Wagner-type measurements	13
Editorial Board	13
Considering the suitability of symmetrical cell testing in developing electrodes for solid oxide fuel cells via a study of different lanthanum nickelate cathode materials	13
Influence of lithium ions on the dielectric relaxation properties of a Nafion ionomer membrane	13
Thermodynamics, local structure, and transport of protons in triple-conducing oxide, BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY4411)	13
Influences of ZrO2 content on microstructural and ionic conductivity of Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolytes	13
Structural analysis of the LiCoO2 cathodes/garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte interface	13
Enhancement of electrical properties of LiTi2(PO4)3 ceramics via trivalent cation doping and microstructure regulation strategies	13
Effects of praseodymium oxide infiltration on the surface segregation behavior and electrocatalytic properties of La0.3Ca0.7Fe0.7Cr0.3O3-δ cathode	12
Lattice distortion and strain induced crack formation in Y-doped BaZrO3	12
Numerical simulations of the Hebb-Wagner polarization kinetics: (I) weakly acceptor-doped perovskite oxides	12
Effect of A-site defects in Sc-doped CaTiO3 oxides on proton-oxide ion mixed conduction properties	12
Editorial Board	12
Editorial Board	12
Defect and migration energies of oxygen vacancies in ABO2N (A – Ba, Ca, Sr and B – Ta, Nb) perovskite oxynitrides	12
Suitability of NaI complexed sodium alginate-polyvinyl alcohol biodegradable polymer blend electrolytes for electrochemical device applications: Insights into dielectric relaxations and scaling studie	12
Development and characterization of crosslinked PPO-based anion exchange membranes for AEM fuel cells	12
Performance improvement tactics of sensitized solar cells based on CuInS2 quantum dots prepared by high temperature hot injection	12
Synthesis of nickel-porous carbon with controllable morphology and its electrochemical performance for lithium sulfur batteries	12
Research on 3D network in-situ grown NiCo2O4 nanowire arrays construction and its energy storage performance	12
Impact of lattice properties on the CO2 splitting kinetics of lanthanide-doped cerium oxides for chemical looping syngas production	12
On the effect of electrode material in electrical conductivity relaxation - An alternative interpretation of the two-fold relaxation behavior in La5.4WO11.1-	12
Preparation and performance study of naphthol substituted polyphosphazene anion exchange membranes	12
The effect of garnet content on the microstructure and electrochemical properties of PEO/garnet composite electrolyte	12
Graphene-modified manganese carbonate composites exhibit long life and high specific capacity performance in lithium storage	12
Solid state battery using LISICON electrolyte with green-sheet technique	12
Trade-off between lithium diffusivity and transference in solid ternary polymer ionic liquid electrolytes	11
The reorientation of protonic defects in barium zirconate: Low-temperature tunneling regime and transition to the adiabatic regime	11
Oxygen reduction reaction kinetics and H/D effects in electrodes in contact with proton-conducting electrolyte BaCe0.9Gd0.1O3-δ	11
In situ doping of lithium iron phosphate with excellent water-soluble zinc salt was used to improve its magnification performance	11
Sintering mechanism and electrical conductivity of ZnO added BaCe0.8Zr0.1Y0.1O3-δ proton conducting perovskites	11
Insights of cationic diffusion in nickel-based honeycomb layered tellurates using molecular dynamics simulation	11
Unveiling the impact of Mg doping and in-situ Li reactive coating on the Ni-rich cathode material for LIBs	11
Editorial Board	11
Multiphysics simulation of the effect of compressed separator on lithium-ion battery	11
Crystalline vs. amorphous Li4PS4I: Impact of structure on ionic transport and performances in solid-state battery	11
Pressurized water electrolysis using hydrophobic gas diffusion layer with a new electrolyzer cell structure	11
Ceria‑iron electrocatalysts for ammonia electrosynthesis using protonic ceramic electrolysis cells	11
Nitrogen functionalities in mesoporous carbons and their impact on the sulfur infiltration efficiency and in the electrochemical performance of Li S cells	11
The doping factor approach in solid state ionics	11
Coupled diffusion-mechanical analysis with dislocation effect in porous spherical electrode	11
Interface formation by composite electrolytes using Li7La3Zr2O12 / Li2OHBr for bulk-type sintering-free oxide-based all-solid-state batteries	11
Low-cost and high-rate porous carbon anode material for potassium-ion batteries	11
Sulfonic acid (-HSO3) functionalization effect on graphene oxide membrane by (3 mercaptopropyl) trimethoxysilane and their applications in hydrogen membrane fuel cells	11
Effect of niobium doping to enhance electrochemical performances of LiNi0.8Co0.1Mn0.1O2 cathode material	11
The critical role of Al2O3, BaTiO3 and ZrO2 nanoceramic fillers in PVDF-HFP based composite polymer electrolytes for high performance lithium-metal batteries	11
Oxygen inward diffusion and complex reorganization of the reaction layer in ion-exchanged glasses evidenced by Auger electron spectroscopy	11
A composite solid-state electrolyte of high ionic-conductivity garnet-type Li6.5La3Zr1.5Ta0.1Nb0.4O12 filler in PEO matrix	11
Structure-activity relationship of the surface film on Fe-xCr alloys under the interaction of corrosion and biofouling revealed by synchrotron radiation	10
NiFe2O4/Ni composites used as anode materials for high-performance lithium ion batteries	10
The effect of a Ta, Sr co-doping strategy on physical and electrochemical properties of Li7La3Zr2O12 electrolytes	10
Editorial Board	10
A DFT insight into the physical features of alkaline based perovskite compounds AInBr3 (A = K, Rb)	10
Correlations between the dopant concentration and ion transport properties of plasticized NaCMC-Pectin polyblend electrolyte membranes for electrochemical device applications	10
New oxygen ion conducting composite solid electrolytes Sm2(WO4)3-WO3	10
Sodium vanadate microflowers as cathode for high-capacity and long-life aqueous zinc-ion battery	10
Insights into ion transport in polymer electrolytes: Classifications, models and mechanisms	10

Study of REBa2Fe3O8+δ (RE = Pr, Nd, Sm) layered perovskites as cobalt-free electrodes for symmetrical solid oxide fuel cells	10
Preface for the SSPC-20 special issue in Solid State Ionics	10
Diffusion from another perspective: Electric field complement to chemical diffusion analysis	10
High-temperature chemical expansion of Pr0.1Ce0.9O2-δ thin films determined by Differential Laser Doppler Vibrometry	10
Ion emission efficiency of Ag+ ions from silver ion-conducting glass under atmospheric pressure	10
A versatile role of WO3 and MoO3 in electrical transport in phosphate glasses	10
Composite solid electrolytes (n-C4H9)4NBF4–nanodiamonds	10
Gd and cu co-doped BaFeO3-δ as a cobalt-free air electrode for solid oxide electrolysis cell	10
Editorial Board	10
Editorial Board	10
Porous cubic MnCo2O4 as a high-performance cathode material for aqueous zinc-ion batteries	10
Fast Na+ ion dynamics in the Nb5+ bearing NaSICON Na3+−Nb Zr2−Si2+P1−O12 as probed by 23Na NMR and conductivity spectroscopy	10
Kinetics of single-crystal nickel-rich cathodes with 4.5 V upper voltage in the view of electrochemical impedance spectroscopy	9
Revealing the causes of degradation of an asymmetric ionic liquid supercapacitor with a composite polyaniline/carbon electrode	9
A novel hybrid electrode materials for supercapacitors based on polyelectrolyte chitosan complex	9
Features of proton transport in composite electrolytes based on acid ammonium salt of 12-phosphotungstic acid and calixarene	9
A fluorinated branched polyether for PEO-based polymer electrolyte via thiol-Michael addition click reaction	9
Dendrite-free lithium anode enabled by lithium atom preferred orientation on Al Li alloy	9
Nano Co3O4 coating endows LiNi0.9Co0.05Mn0.05O2 with high cycling performance and suppressed air sensitivity	9
Chain length dependence of structural and transport properties of single lithium-ion conducting polymer electrolytes: A molecular dynamics simulation study	9
Improving Mg2+ ionic conductivity in ZIF-8 by Cu (II) doping and mbIm incorporation into the framework	9
Electrochemical impedance spectroscopy of Li-ion negative electrodes based on titanium oxyfluoride and titanium trifluoride	9
Hydrogen conductivity and anisotropy of ionic conductivity of LiB3O5 crystals	9
Editorial Board	9
Studies on the inhibition of lithium dendrite formation in sulfide solid electrolytes doped with LiX (X = Br, I)	9
Molecular dynamics simulations of ionic liquid/poly(vinylidene fluoride) systems: Ion transport with different anions	9
The road to high-entropy: Combinatorial sequential doping study of Ba2In2O5	9
The morphology and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material prepared by the assistance of CTAB surfactant	9
Features of hydrogen diffusion and spatial heterogeneity of its distribution in pure LiNbO3 crystals of congruent composition	9
Enhanced electrochemical performance of WO3 thin films prepared from polyvinyl alcohol-modified nanoparticle ink	9
Pompon-villus shaped hydrogen titanate/anatase with heterostructure for superior sodium storage	9
Solid-state lithium battery with garnet Li7La3Zr2O12 nanofibers composite polymer electrolytes	9
Improvement of magnetoelectric properties of PVDF based flexible composite films based on topography engineering	9
Editorial Board	9
Tracer diffusion coefficient measurements on NASICON-type Lithium-ion conductor LAGP using neutron radiography between 25 °C and 500 °C	9
Composite anion exchange membranes based on poly(biphenyl piperidinium) / ZrO2	9
Hierarchical sparse Co nanowire/carbon nanofiber arrays as 3D Li+ gateways for high rate, long-life lithium-sulfur batteries	9
Newly developed gel polymer electrolytes based on crosslinked poly(2-oxazolines)	9
Electrochemical performance of ZIF-derived Co3SnC0.7/Co3Sn2@NC with heterostructure as anode material for sodium-ion batteries	9
Characterization of Co-Mn layered double hydroxide nanostructures covered on Co3O4 as electrode material for supercapacitor applications	9
Lithium ion transport in water-containing Li(SCN) over a wide compositional range: From water doping to hydration	8
Advanced battery cathode microstructure analysis through operando synchrotron X-ray tomography and super-resolution deep learning	8
Mechanism of photo-ionic stoichiometry changes in SrTiO3	8
Editorial Board	8
Effect of hydration level on zinc electrolyte properties	8
Graphene oxide-enhanced alginate-PVA biopolymer electrolytes with improved proton conductivity and electrochemical stability for supercapacitor applications	8
Fast-charging Na4Fe3(PO4)2P2O7 cathode for sodium-ion batteries	8
Synthesis and proton-conduction properties of Cs3PW12O40 composites	8
Developing a dynamic oxygen migration-release model for enhanced understanding of Ce-materials reactivity	8
Cobalt-catalyzed soft-hard carbon composite anodes for enhanced sodium-ion storage	8
Hydrogen diffusion in proton-exchanged congruent Lithium Niobate during post-annealing	8
MoWS2 promoted lithium polysulfide conversion for high-performance lithium‑sulfur battery	8
Enhancing cycling stability in Li-rich layered oxides by atomic layer deposition of LiNbO3 nanolayers	8
Exploring the structural and conductivity behaviours of mechanochemically and hydrothermally synthesized Ce3+-doped BaSnF4 solid electrolytes for all-solid-state fluoride-ion batteries	8
Mechanical-electrochemical coupling patterns in all-solid-state lithium batteries employing sulfide- and halide-based solid electrolytes	8
Poly(ionic liquid)/expanded pore NH2-UiO-66 composite solid-state electrolyte for high-performance solid-state lithium-ion batteries	8
Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate	8
Synergistic effects of binary lithium salts on ion transport and dielectric relaxation in poly(methyl methacrylate) grafted natural rubber solid polymer electrolytes	8
Lowering the sintering temperature of LiCoO2 using LiOH aqueous solution	8
Exploration of Na2.9V1.9Ti0.1(PO4)3@C as novel cathode material for aqueous zinc-ion batteries	8
Self-diffusion of constituent elements in nominally undoped LaAlO3 single crystals	8
Defect chemistry of LaGaO3 doped with divalent cations	8
First-principles study of the deformation and migration mechanisms of Li–La–Ti–O perovskite under uniaxial stress	8
Dopant synergy vs. competition in codoped Li7La3Zr2O12 garnet solid electrolytes	7
Mn-MOF derivative/carbonized PAN composite coating with a 3D network structure as a self-supported anode for lithium-ion batteries	7
Influence of Li3BO3 on the stability of Li1.5Al0.5Ge1.5(PO4)3 glass-ceramics with Li4Ti5O12 anode	7
On the interpretation of the impedance response of a passivated lithium metal anode	7
Analysis of the electrochemical behavior of PANI synthesized galvanostatic method through electrochemical impedance spectroscopy	7
High conductivity of a fuel cell through a hydrogen bond network within an interpenetrating anion exchange membrane	7
Ionic nanoarchitectonics for electronic information devices	7
Surrogate modeling for transient electrochemical potential analysis for SOFC using proper orthogonal decomposition	7
Effect of aid-sintering additives in processing of solid oxide fuel cells electrolytes by tape casting	7
Li3BO3 decoration endows fast reaction kinetics of LiFePO4 cathode for lithium ion batteries	7
Electron diffraction study and ionic conductivity of fluorite Ba1-xLaxF2+x and tysonite La1-yBayF3-y phases in the BaF2-LaF3 system	7
Fast magnetron sputtering of LiPON from carbon-doped Li3PO4 target	7
Demonstration of domain wall current in MgO-doped lithium niobate single crystals up to 400 7
Computational insights into ionic conductivity of transition metal electrode materials for metal-ion batteries - A review	7
Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries	7
Li-diffusion in lithium niobate - tantalate solid solutions	7
Enhanced electrochemistry stability of oxygen doped Li6PS5Cl argyrodite solid electrolyte by liquid-phase synthesis	7
Accounting for stray capacitances in impedance measuring cells — A mandatory step in the investigation of solid ion conductors	7
Degradation study of La0.6Sr0.4Co1–Fe O3–δ based symmetric cells by means of impedance spectroscopy and oxygen isotope exchange	7
Enhancing LSCF-based air electrode durability: Insights into sulfur poisoning and air purification	7
Dual perovskite La2NiMnO6 coating modified LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium ion batteries	7
Effect of Li+ doping on the color performance and temperature stability of γ-Sm2S3	7
SnS2 anchored on MXene etched by hydrofluoric acid for sodium-ion battery anode material	7
Change of electrochemical potential and entropy of Li around an edge dislocation in solid electrolytes	7
Mechanism of mixed conductivity in crystalline and amorphous lithium lanthanum titanate	7
Investigation of structural, dielectric, and AC conductivity response in potassium-based polymer electrolytes: Tailoring PEO-PVDF blends for enhanced performance	7
Tailoring composites via in situ growth of Co-MOF on V2CTx MXene as high-performance anode for lithium-ion batteries	7
Honeycomb layered oxide as cathodic material for Li- and post-Li batteries: A self-consistent PBE + U study of metal ions (A = Li, Ca, Al) intercalation in bulk SrRu2O6	7
Facile synthesis of N-doped hierarchical porous carbon sheets from biomass for supercapacitors	7
Sc-doped Co-based perovskites as IT-SOFC cathode with high oxygen reduction reaction and CO2 tolerance	7
Surface modulated B-site doping of PrBa0.5Sr0.5Co2-xFexO5+δ as highly efficient cathode for intermediate-temperature solid oxide fuel cells	7
Synthesis and electrochemical performance enhancement of Li2MnSiO4 cathode material for lithium-ion batteries via Mn-site Cr doping	7