Solid State Ionics

Papers
(The TQCC of Solid State Ionics is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-12-01 to 2025-12-01.)
ArticleCitations
Charge carrier relaxation in YSZ and CaSZ single crystals: In search of the analytic representation of DRT71
Microscopic insights on ion transport in Li3OCl1−Br anti-perovskites from metadynamics simulations59
Preparation of grain-aligned polycrystal of doped lanthanum silicate oxyapatite by templated grain growth method and evaluation of its structural and electrical properties48
Controllable synthesis of nitrogen-containing core-shell carbon spheres with a gap for enhanced lithium-ions storage48
Excellent stability of layered Na0.67Ni0.33Fe0.33Mn0.33O2 cathode materials with P2/O3 biphasic system in humid ambient air46
From setup to analysis: A compact guide to performing Molecular Dynamics simulations of ion transport in solids42
Enhancement of microstructure and electrochemical properties of LLZTO solid state electrolyte by co-doping with Ga and Y38
A facile route to unlock the high capacity of molecular organic cathode for aqueous zinc-ion battery36
A review of proton migration and interaction energies in doped barium zirconate36
Electrochemical stability of a NASICON solid electrolyte from the lithium aluminum germanium phosphate (LAGP) series35
Construction of conductive PTh-promoted NaTi2(PO4)3 nanocomposite with two-electron reactions for sodium energy storage33
Editorial Board31
Solid-state polymer magnesium supercapacitor31
Quantitative assessment of enhanced performance of Ru-loaded direct ammonia proton ceramic fuel cells31
Interfacial corrosion behavior between O atoms and alloy elements at iron-liquid LBE interface by first-principles molecular dynamics30
High nickel-rich layered oxide: The intrinsic role of cation substitution and metal-oxide coating in tuning cationic mixing and enhancing electronic conductivity29
The synthesis of Eu–Tb–Ho co–doped Bi2O3–based ceramic powders for use in intermediate temperature–SOFCs29
Unveiling the aging memory effect in Lithium-ion batteries: A thermodynamic approach28
Composite solid electrolyte with improved ionic conductivity and high lithium transference number through reduced PVDF-HFP crystallinity27
Tunable grain boundary conductivity in sodium doped high entropy oxides27
Ball-milling synthesis of low-water and phase-stable Prussian blue for sodium-ion batteries27
Influence of TiC particles on grain boundary structure and solute atomic diffusion in TiC/Al-Cu composites26
Hydride prediction during late-stage oxidation of uranium in a water vapour environment26
Free volume structure at interphase region of poly (ethylene oxide)-Al2O3 nanorods composites based solid polymer electrolyte and its direct correlation with Li ion conductivity25
Enhancement of the Na2FePO4F@gC3N4 electrochemical performance in view of its implementation in sodium-ion batteries25
Kinetic and transport characteristics of LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries25
Effects of material fabrication and current collector on the total conductivity of doped barium zirconates23
Effect of yttrium ion on the space charge potential across grain boundaries regions of gadolinia-doped ceria electrolytes23
Origin of over-cycling tolerance achieved by metal phosphate coating for transition metal oxide lithium-ion batteries22
Editorial Board22
Editorial Board22
Oxide ion conductivity in doped bismuth gallate mullite type oxide, Bi2Ga4O922
Cerium oxide as cathode material for aqueous zinc-ion battery21
Influence of Germanium oxide nanoparticles on the electrical conductivity of Li-ion conducting NaCMC/PVA nanocomposite films21
Perovskite SrCo0.5Fe0.25Cu0.2Nb0.05O3-δ cathode for intermediate-temperature solid oxide fuel cells: Improved working stability and CO2 tolerance21
Polyelectrolytes based on Nafion for lithium rechargeable batteries21
Editorial Board21
Effects of mechanical grinding on the phase behavior and anhydrous proton conductivity of imidazolium hydrogen succinate21
Synergistic effect of co-sputtered tungsten-titanium nitride as electrode material for efficient hybrid supercapacitors20
Exploring a metal coated by M-graphene as an encouraging anode electrode material for sodium-ion batteries using DFT calculations20
Conductivity of 2-adamantanone with lithium bis(trifluoromethanesulfonyl)imide: Impact of residual solvent and temperature20
Mixed hydride-electronic conductivity in Rb2CaH4 and Cs2CaH420
Organic weak acid pretreatment enables surface-engineered Li-rich cathodes with suppressed voltage decay and enhanced kinetics20
Hydrated doped-BaZrO3 proton conductors studied by positron annihilation lifetime spectroscopy20
Proton conducting zeolite composite membrane boosts the performance of vanadium redox flow battery20
Fluoride-ion conductivity of scheelite-type LiYb1-MF4± (M = Mg, Ca, Sr, Hf)19
An extended finite element method for the Nernst-Planck-Poisson equations19
Tracer diffusion coefficients measurements on LaPO4-dispersed LATP by means of neutron radiography18
Synergistic effects of halloysite nanotubes in electrospun PVDF-HFP separator for advanced sodium ion battery18
Interface evolution of lithium metal anodes in all-solid-state batteries via mechanical–electrochemical investigations18
Reversible lithium insertion and conversion process of amorphous VS4 revealed by operando electrochemical NMR spectroscopy17
Co-doped PVA-borax anodic supercapacitors with high capacity and self-healability features17
Editorial Board17
First-principles study on haeckelite hexagonal monolayer with high specific capacity for sodium-ion battery17
Editorial Board17
Defect-independent migration of Li on C3B for Li-ion battery anode material16
The accommodation of lithium in bulk ZrO216
Editorial Board16
Anode supported planar 5 × 5 cm2 SrZr0.5Ce0.4Y0.1O2.95 based solid oxide protonic fuel cells via sequential tape-casting16
Effect of LiNbO3 surface dry-coating on the air stability of Ga-doped LLZO solid electrolytes16
Electrochemical investigations of PVdF-HFP-NaTFSI-[BMPYr][TFSI] polymer-salt-IL electrolyte for Na-rechargeable battery16
The electrochemical performance of electrodeposited nickel foam electrodes coated by nano-confined lithium borohydride-metal oxides composites16
First-principles study on electronic properties and lattice configurations of Ni3S2/LiAlO2 interface towards lithium ions storage16
Proton conduction in tetra-n-butylammonium bromide semiclathrate hydrate16
Prospective oxygen-ion conductors Ln X O : Geometry and energy calculations16
Ethylene carbonate plasticized polymer electrolyte for chloride ion batteries with enhanced reversible capacity15
Effect of partial pressure of oxygen, target current, and annealing on DC sputtered tungsten oxide (WO3) thin films for electrochromic applications15
Editorial Board15
Chemical expansion of La3+ and Yb3+ incorporated Zr-doped ceria ceramics for concentrated solar energy-driven thermochemical production of fuels15
SnO2/carbon dots nanocomposite synthesized by one-pot solvothermal technique for high-sensitivity triethylamine gas sensors15
A novel strategy for capacity judgement of hard carbon in sodium-ion batteries: Ensuring the consistency of the available anode capacity between half-cell and full-cell15
High concentrations of sodium dodecylbenzene sulfonate electrolyte additives improve the performance of aqueous zinc ion batteries15
A new boundary condition forging the unprecedented self-consistence of galvanostatic intermittent titration technique15
Rational molecular design of partly fluorinated fuel cell membranes with high proton conductivity under low-humidity conditions14
Editorial Board14
First-principles study on lattice structures and electronic properties of Li1/2La1/2TiO3/Li2S interface14
First-principles study on the electronic, magnetic, and Li-ion mobility properties of N-doped Ti2CO214
Polymer electrolyte based on Nafion plasticized with carbonates and their ternary mixtures for sodium-ion batteries14
The influence of the volume concentration of hydrogen on the fine structure of the IR absorption spectra and conductivity features in congruent LiTaO3 crystals14
New insight into the dual-dissociation effect of POSS fillers with suitable aperture for solid-state polymer electrolytes14
The extraction of hopping frequencies of mobile fluorine ions in the superionic conductor Ba0.5La0.5F2.5 from electrical modulus spectroscopy data14
Comprehensive study of conductivity in the series of monoclinic oxymolybdates: Ln2MoO6 (Ln = Sm, Gd, Dy)14
Synthesis and ionic conductivity of Li boracites, Li4B7O12Cl and Li4B4Al3O12Cl1-Br14
Calcium substitution to improve the total ionic conductivity of the Li3/8Sr7/16Ta3/4Hf1/4O3 perovskite-type electrolyte14
Rambutan-like Na4MnCr(PO4)3@C/CNTs as a high-energy-density cathode for sodium-ion batteries14
Multi-component polymeric membranes based on acrylamide monomers for fuel cells14
Microwave synthesis of binder-free melamine sponge-derived NiSe2 electrodes for asymmetric supercapacitor14
Effects of depth of discharge on the electrochemical performance of LiFePO4-graphite pouch cells14
Structural analysis of the LiCoO2 cathodes/garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte interface13
Editorial Board13
Native point defects and polaron transport in zirconium pyrovanadate13
All-solid-state lithium-sulfur batteries assembled by composite polymer electrolyte and amorphous sulfur/rGO composite cathode13
Implementation of highly crystalline polyketones as solid polymer electrolytes in high-temperature lithium metal batteries13
Deciphering structural changes in LiNixMnyCozO2 cathodes of Li ion batteries during cycling: Experimental and theoretical investigations13
Influences of ZrO2 content on microstructural and ionic conductivity of Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolytes13
(Fe, Ni)-ZIF-8 derived sp2-C-rich carbon as surface coating for enhancing commercial LiFePO4 performance13
The partial electronic conductivity of lithium halides and their role in SEI formation in solid-state batteries – Hebb-Wagner-type measurements13
Lanthanum nickelates and their application in Solid Oxide Cells – The LaNi1-xFexO3 system and other ABO3-type nickelates13
Sodium ion conductivity of hexagonal layered P2-type phases with multiple cationic substitutions13
Influence of the lithium niobate crystals composition on mobility of Н+ and Li+ ions in the temperature range 300–450 K13
Effect of cold sintering on the sintering shrinkage matching of NiO-GDC anode with GDC electrolytes in making anode-supported solid oxide fuel cells13
Preparation and performance study of naphthol substituted polyphosphazene anion exchange membranes13
Understanding interfacial reactions and electrochemical performance of MoS2 cathodes with laponite-based solid polymer electrolytes13
Novel oxygen-ion conductors Ln10W22O81 (Ln = La, Ce, Pr, Nd)13
Development and characterization of crosslinked PPO-based anion exchange membranes for AEM fuel cells12
Optimization of superionic conductivity in batteries with solid-state electrolytes12
Sulfur-doped porous carbon derived by metal-organic framework (MOF-5) for high lithium/sodium storage performance12
Flexible piezoresistive sensors with high sensitivity and ultra-wide pressure range based on alkalized MXene12
Single oxygen vacancy in BaCoO3: Hybrid DFT calculations and local site symmetry approach12
Influence of lithium ions on the dielectric relaxation properties of a Nafion ionomer membrane12
Considering the suitability of symmetrical cell testing in developing electrodes for solid oxide fuel cells via a study of different lanthanum nickelate cathode materials12
Pathways for Li+ migration in Li1+xV3O8: Geometrical-topological analysis12
Numerical simulations of the Hebb-Wagner polarization kinetics: (I) weakly acceptor-doped perovskite oxides12
Thermodynamics, local structure, and transport of protons in triple-conducing oxide, BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY4411)12
Suitability of NaI complexed sodium alginate-polyvinyl alcohol biodegradable polymer blend electrolytes for electrochemical device applications: Insights into dielectric relaxations and scaling studie12
One-step synthesis of the CoO nanoarrays anchored on nickel foam as a three-dimensional current collector for lithium‑sulfur batteries12
Enhancement of electrical properties of LiTi2(PO4)3 ceramics via trivalent cation doping and microstructure regulation strategies12
Lattice distortion and strain induced crack formation in Y-doped BaZrO312
On the effect of electrode material in electrical conductivity relaxation - An alternative interpretation of the two-fold relaxation behavior in La5.4WO11.1-12
Unveiling the impact of Mg doping and in-situ Li reactive coating on the Ni-rich cathode material for LIBs11
The reorientation of protonic defects in barium zirconate: Low-temperature tunneling regime and transition to the adiabatic regime11
Sintering mechanism and electrical conductivity of ZnO added BaCe0.8Zr0.1Y0.1O3-δ proton conducting perovskites11
Pressurized water electrolysis using hydrophobic gas diffusion layer with a new electrolyzer cell structure11
Synthesis of nickel-porous carbon with controllable morphology and its electrochemical performance for lithium sulfur batteries11
Nitrogen functionalities in mesoporous carbons and their impact on the sulfur infiltration efficiency and in the electrochemical performance of Li S cells11
Effect of A-site defects in Sc-doped CaTiO3 oxides on proton-oxide ion mixed conduction properties11
Impact of lattice properties on the CO2 splitting kinetics of lanthanide-doped cerium oxides for chemical looping syngas production11
Low-cost and high-rate porous carbon anode material for potassium-ion batteries11
Research on 3D network in-situ grown NiCo2O4 nanowire arrays construction and its energy storage performance11
Ceria‑iron electrocatalysts for ammonia electrosynthesis using protonic ceramic electrolysis cells11
In situ doping of lithium iron phosphate with excellent water-soluble zinc salt was used to improve its magnification performance11
Editorial Board11
Effects of praseodymium oxide infiltration on the surface segregation behavior and electrocatalytic properties of La0.3Ca0.7Fe0.7Cr0.3O3-δ cathode11
Editorial Board11
Performance improvement tactics of sensitized solar cells based on CuInS2 quantum dots prepared by high temperature hot injection11
Crystalline vs. amorphous Li4PS4I: Impact of structure on ionic transport and performances in solid-state battery11
Multiphysics simulation of the effect of compressed separator on lithium-ion battery11
Hydroxyl on the filler surface promotes Li+ conduction in PEO all-solid-state electrolyte11
The critical role of Al2O3, BaTiO3 and ZrO2 nanoceramic fillers in PVDF-HFP based composite polymer electrolytes for high performance lithium-metal batteries11
Graphene-modified manganese carbonate composites exhibit long life and high specific capacity performance in lithium storage11
The effect of garnet content on the microstructure and electrochemical properties of PEO/garnet composite electrolyte11
Solid state battery using LISICON electrolyte with green-sheet technique11
Defect and migration energies of oxygen vacancies in ABO2N (A – Ba, Ca, Sr and B – Ta, Nb) perovskite oxynitrides11
Editorial Board11
Editorial Board10
Composite solid electrolytes (n-C4H9)4NBF4–nanodiamonds10
Ion emission efficiency of Ag+ ions from silver ion-conducting glass under atmospheric pressure10
Porous cubic MnCo2O4 as a high-performance cathode material for aqueous zinc-ion batteries10
Structure-activity relationship of the surface film on Fe-xCr alloys under the interaction of corrosion and biofouling revealed by synchrotron radiation10
The doping factor approach in solid state ionics10
Interface formation by composite electrolytes using Li7La3Zr2O12 / Li2OHBr for bulk-type sintering-free oxide-based all-solid-state batteries10
Trade-off between lithium diffusivity and transference in solid ternary polymer ionic liquid electrolytes10
Effect of niobium doping to enhance electrochemical performances of LiNi0.8Co0.1Mn0.1O2 cathode material10
Study of REBa2Fe3O8+δ (RE = Pr, Nd, Sm) layered perovskites as cobalt-free electrodes for symmetrical solid oxide fuel cells10
High-temperature chemical expansion of Pr0.1Ce0.9O2-δ thin films determined by Differential Laser Doppler Vibrometry10
Oxygen inward diffusion and complex reorganization of the reaction layer in ion-exchanged glasses evidenced by Auger electron spectroscopy10
A versatile role of WO3 and MoO3 in electrical transport in phosphate glasses10
Insights into ion transport in polymer electrolytes: Classifications, models and mechanisms10
New oxygen ion conducting composite solid electrolytes Sm2(WO4)3-WO310
Sulfonic acid (-HSO3) functionalization effect on graphene oxide membrane by (3 mercaptopropyl) trimethoxysilane and their applications in hydrogen membrane fuel cells10
Oxygen reduction reaction kinetics and H/D effects in electrodes in contact with proton-conducting electrolyte BaCe0.9Gd0.1O3-δ10
Insights of cationic diffusion in nickel-based honeycomb layered tellurates using molecular dynamics simulation10
NiFe2O4/Ni composites used as anode materials for high-performance lithium ion batteries10
Fast Na+ ion dynamics in the Nb5+ bearing NaSICON Na3+−Nb Zr2−Si2+P1−O12 as probed by 23Na NMR and conductivity spectroscopy10
A DFT insight into the physical features of alkaline based perovskite compounds AInBr3 (A = K, Rb)10
A composite solid-state electrolyte of high ionic-conductivity garnet-type Li6.5La3Zr1.5Ta0.1Nb0.4O12 filler in PEO matrix10
Coupled diffusion-mechanical analysis with dislocation effect in porous spherical electrode10
The effect of a Ta, Sr co-doping strategy on physical and electrochemical properties of Li7La3Zr2O12 electrolytes9
Features of hydrogen diffusion and spatial heterogeneity of its distribution in pure LiNbO3 crystals of congruent composition9
Molecular dynamics simulations of ionic liquid/poly(vinylidene fluoride) systems: Ion transport with different anions9
Composite anion exchange membranes based on poly(biphenyl piperidinium) / ZrO29
A novel hybrid electrode materials for supercapacitors based on polyelectrolyte chitosan complex9
Solid-state lithium battery with garnet Li7La3Zr2O12 nanofibers composite polymer electrolytes9
Editorial Board9
Hydrogen conductivity and anisotropy of ionic conductivity of LiB3O5 crystals9
Features of proton transport in composite electrolytes based on acid ammonium salt of 12-phosphotungstic acid and calixarene9
Gd and cu co-doped BaFeO3-δ as a cobalt-free air electrode for solid oxide electrolysis cell9
Improving Mg2+ ionic conductivity in ZIF-8 by Cu (II) doping and mbIm incorporation into the framework9
Hierarchical sparse Co nanowire/carbon nanofiber arrays as 3D Li+ gateways for high rate, long-life lithium-sulfur batteries9
Editorial Board9
Revealing the causes of degradation of an asymmetric ionic liquid supercapacitor with a composite polyaniline/carbon electrode9
Pompon-villus shaped hydrogen titanate/anatase with heterostructure for superior sodium storage9
Diffusion from another perspective: Electric field complement to chemical diffusion analysis9
Kinetics of single-crystal nickel-rich cathodes with 4.5 V upper voltage in the view of electrochemical impedance spectroscopy9
Editorial Board9
Tracer diffusion coefficient measurements on NASICON-type Lithium-ion conductor LAGP using neutron radiography between 25 °C and 500 °C9
Correlations between the dopant concentration and ion transport properties of plasticized NaCMC-Pectin polyblend electrolyte membranes for electrochemical device applications9
Editorial Board9
Nano Co3O4 coating endows LiNi0.9Co0.05Mn0.05O2 with high cycling performance and suppressed air sensitivity9
Editorial Board9
Chain length dependence of structural and transport properties of single lithium-ion conducting polymer electrolytes: A molecular dynamics simulation study9
Improvement of magnetoelectric properties of PVDF based flexible composite films based on topography engineering9
Electrochemical impedance spectroscopy of Li-ion negative electrodes based on titanium oxyfluoride and titanium trifluoride9
Sodium vanadate microflowers as cathode for high-capacity and long-life aqueous zinc-ion battery9
Studies on the inhibition of lithium dendrite formation in sulfide solid electrolytes doped with LiX (X = Br, I)9
Preface for the SSPC-20 special issue in Solid State Ionics9
Sulfonated PVdF-HFP/shuttle-like SrBaWO4 nanocomposite membranes for the evolution of high performance and durable DMFCs9
Enhanced electrochemical performance of WO3 thin films prepared from polyvinyl alcohol-modified nanoparticle ink8
Synergistic effects of binary lithium salts on ion transport and dielectric relaxation in poly(methyl methacrylate) grafted natural rubber solid polymer electrolytes8
Advanced battery cathode microstructure analysis through operando synchrotron X-ray tomography and super-resolution deep learning8
Editorial Board8
Lithium ion transport in water-containing Li(SCN) over a wide compositional range: From water doping to hydration8
Synthesis and proton-conduction properties of Cs3PW12O40 composites8
Electrochemical performance of ZIF-derived Co3SnC0.7/Co3Sn2@NC with heterostructure as anode material for sodium-ion batteries8
Newly developed gel polymer electrolytes based on crosslinked poly(2-oxazolines)8
A fluorinated branched polyether for PEO-based polymer electrolyte via thiol-Michael addition click reaction8
Cobalt-catalyzed soft-hard carbon composite anodes for enhanced sodium-ion storage8
Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate8
Exploration of Na2.9V1.9Ti0.1(PO4)3@C as novel cathode material for aqueous zinc-ion batteries8
Hydrogen diffusion in proton-exchanged congruent Lithium Niobate during post-annealing8
Nanocube-structured ZnSn(OH)₆ for enhanced bifunctional electrocatalysis in oxygen evolution and urea oxidation reactions8
Mechanism of photo-ionic stoichiometry changes in SrTiO38
Characterization of Co-Mn layered double hydroxide nanostructures covered on Co3O4 as electrode material for supercapacitor applications8
Dendrite-free lithium anode enabled by lithium atom preferred orientation on Al Li alloy8
The road to high-entropy: Combinatorial sequential doping study of Ba2In2O58
Lowering the sintering temperature of LiCoO2 using LiOH aqueous solution8
First-principles study of the deformation and migration mechanisms of Li–La–Ti–O perovskite under uniaxial stress8
Analysis of the electrochemical behavior of PANI synthesized galvanostatic method through electrochemical impedance spectroscopy8
Developing a dynamic oxygen migration-release model for enhanced understanding of Ce-materials reactivity8
Poly(ionic liquid)/expanded pore NH2-UiO-66 composite solid-state electrolyte for high-performance solid-state lithium-ion batteries8
The morphology and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material prepared by the assistance of CTAB surfactant8
High conductivity of a fuel cell through a hydrogen bond network within an interpenetrating anion exchange membrane7
Computational insights into ionic conductivity of transition metal electrode materials for metal-ion batteries - A review7
Fast magnetron sputtering of LiPON from carbon-doped Li3PO4 target7
Dual perovskite La2NiMnO6 coating modified LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium ion batteries7
Electron diffraction study and ionic conductivity of fluorite Ba1-xLaxF2+x and tysonite La1-yBayF3-y phases in the BaF2-LaF3 system7
Effect of Li+ doping on the color performance and temperature stability of γ-Sm2S37
Enhanced electrochemistry stability of oxygen doped Li6PS5Cl argyrodite solid electrolyte by liquid-phase synthesis7
A synergetic modification approach toward high capacity Ni-rich cathode materials for next generation lithium-ion batteries7
Facile synthesis of N-doped hierarchical porous carbon sheets from biomass for supercapacitors7
MoWS2 promoted lithium polysulfide conversion for high-performance lithium‑sulfur battery7
Honeycomb layered oxide as cathodic material for Li- and post-Li batteries: A self-consistent PBE + U study of metal ions (A = Li, Ca, Al) intercalation in bulk SrRu2O67
Synthesis and characterization of highly conductive Ga/Y co-doped LLZO by facile combustion sol-gel method7
Dopant synergy vs. competition in codoped Li7La3Zr2O12 garnet solid electrolytes7
Synthesis and electrochemical performance enhancement of Li2MnSiO4 cathode material for lithium-ion batteries via Mn-site Cr doping7
Change of electrochemical potential and entropy of Li around an edge dislocation in solid electrolytes7
SnS2 anchored on MXene etched by hydrofluoric acid for sodium-ion battery anode material7
Accounting for stray capacitances in impedance measuring cells — A mandatory step in the investigation of solid ion conductors7
Si/Cu-Zn(ox)/C composite as anode material for Li-ion batteries7
Effect of hydration level on zinc electrolyte properties7
Sequential-infiltration of Ce and Ni in NiO-YSZ fuel electrode for tubular type solid oxide reversible cells (SORC) using LaGaO3 electrolyte film7
Self-diffusion of constituent elements in nominally undoped LaAlO3 single crystals7
Ionic nanoarchitectonics for electronic information devices7
Effect of aid-sintering additives in processing of solid oxide fuel cells electrolytes by tape casting7
Influence of Li3BO3 on the stability of Li1.5Al0.5Ge1.5(PO4)3 glass-ceramics with Li4Ti5O12 anode7
Mn-MOF derivative/carbonized PAN composite coating with a 3D network structure as a self-supported anode for lithium-ion batteries7
Surrogate modeling for transient electrochemical potential analysis for SOFC using proper orthogonal decomposition7
Tailoring composites via in situ growth of Co-MOF on V2CTx MXene as high-performance anode for lithium-ion batteries7
Degradation study of La0.6Sr0.4Co1–Fe O3–δ based symmetric cells by means of impedance spectroscopy and oxygen isotope exchange7
Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries7
0.12779498100281