Materials Letters

Article	Citations
K-ion modified V2O5 with abundant oxygen defects as cathode for aqueous zinc-ion battery	119
Anomalous reaction of Saucedo-etching on CdZnTeSe crystal	99
Bronze TiO2-MXene heterostructures for dramatic enhancement of photocatalytic degradation of tetracycline under visible light	92
Physical and microstructural properties of YSZ + Cr2O3 thermal barrier coatings developed using HVOF technique	85
Incorporation of P2O5 in a Na2O-rich aluminoborosilicate glass	83
Flexible nonlinear photonics of heterostructured MXene-derived quantum dots	70
Polydopamine-loaded microneedles for sequential tumor ablation and osteochondral regeneration	67
Effect of electropulsing treatment on microstructure and mechanical properties of 316L stainless steel fabricated by selective laser melting	65
Editorial Board	65
High temperature environmental scanning electron microscopy characterization of transient phase formation during conversion of simulated nuclear waste feed to glass	65
One-step synthesis of needle-like lanthanum-doped TiO2 nanomaterials and their photoconductivity activity in air medium	65
Visible light-modulated switching behavior of CZTSSe-based synaptic memristor	62
Enhancing the corrosion resistance of selective laser melting Ti6Al4V alloy by hot stamping post-treatment	60
Towards hybrid PbS quantum Dot/Perovskite solar cells to enhance PCE: An ab Initio study using SCAPS	60
Effect of piezoelectric field on the photocatalysis of layered BiOI microspheres under ultrasonication-induced deformation	60
Al2O3@LiMn2O4 nanoparticles cathodes for high-rate Li-ion batteries	58
Cast WC-Co alloy-based tool manufacturing using a polymeric mold prepared via digital light processing 3D printing	56
Self-supported NiFeS2/NiFe-LDH nanoflowers for high-efficiency oxygen evolution	54
A rare earth free magnesium alloy with exceptional thermal stability and enhanced mechanical properties	53
Influence of contacts in 2D infill patterns on mechanical properties of 3D printed concrete structures	52
Efficient catalytic oxidation of ethanol over Pt/Ce-Mn-Ti-O catalysts supported on cordierite honeycombs	52
Evaluating magnetic degradation in FeCo-V alloys for high-output and compact electric motors: A multiscale-multiphysics approach	51
Strong magnetic response regulated by layer-stacking perturbations in an Aurivillius-phase oxide	50
3D-printable wound patch composed of vitamin E-enriched polylactic acid scaffolds	50
Design of MOF-based nanobiocatalyst with super-catalytic properties with iron mineralization approach	50

Additive manufacturing of high relative density Cu-0.8Cr alloy by low power 1064 nm Yb-fiber laser powder bed fusion: Role of Nano-TiC modification	50
Carbon-coated SiO for LIBs with superior capacity and cycle stability	49
Effect of combined rolling with subsequent aging on the structure, mechanical and fatigue properties of β titanium alloy	48
Superior antifouling properties of a CoCrFeMnNi high-entropy alloy	48
Templated synthesis of nano-LiCoO2 cathode for lithium-Ion batteries with enhanced rate capability	48
Turning waste into treasure: Carbonized walnut shell for solar-driven water evaporation	47
Reversible switching of wettability based on shape memory effect	47
Mo-Se-N dry lubricant coatings as a universal solution for protecting surfaces of complex 3D parts	46
Effects of substitutional doping and vacancy formation on the structural and electronic properties of siligene: A DFT study	46
High toughness 3D printed white Portland cement-based materials with glass fiber textile	46
Biosynthesized metallic nanocatalysts in the removal and degradation of pollutants	46
Structural and transport properties of mechanochemically synthesized La0.9Ba0.1F2.9 and La0.9Ba0.05Ca0.05F2.9	45
Phase decomposition upon heat-treatment of a eutectoid Ti-Fe alloy processed by dual-wire-arc additive manufacturing	45
Iodide-induced galvanic replacement of nickel film on copper as activator for electroless nickel-phosphorus plating	45
On the yield stress anomaly in a B2-ordered refractory AlNbTiVZr0.25 high-entropy alloy	45
Stable high-nickel austenitic steel produced by electron beam additive manufacturing using dual wire-feed system	44
Facile synthesis, structural and optical characterizations of Bi12ZnO20 sillenite crystals: Application for Cefuroxime removal from wastewater	44
Nitrogen-doped cotton stalk porous carbon composite as anode material for Lithium-ion battery	43
Facile synthesis of Ti3+/Ti4+ co-doped FeOCl with solar-light enhanced Fenton activity	43
An antibacterial coaxial electrospun polylactic acid/silk fibroin loaded with nano-ZnO and Voltaren	43
Rare-earth metal multicomponent perovskite as a electrocatalyst for water splitting	42
Deformation behavior and microstructure of Mg-13Gd-4Y-2Zn-0.5Zr alloy during the rotating forward extrusion process	42
Construction of layer-by-layer self-assembly coatings based on hemicyanine derivative for photodynamic antimicrobial application	42
Spontaneous formation of skyrmion structure in a hard magnetic film with low coercivity	42
A study of high damping capacities and mechanical properties of cast Mg-Gd binary alloys	42
Fabricating boride layer on the titanium surface to optimize microstructure of the Ti/Al interface reaction zone	41
Enhancement of antibacterial and cytocompatibility of Ti by Zn-doped BST coatings	40
HCOO− ions mediated formation of cupric subcarbonate (Cu2(OH)2CO3) with various hierarchical micro/nanostructure via facile and mild solution route	40
Viscous plastic flow in contact layers as a method of stress relaxation in dry sliding of steel against steel under electric current	40
Low resistivity and near-zero temperature drift ZrB2-Ag composite films prepared by DC magnetron co-sputtering	40
Conjugated polycopper phthalocyanine as the anode-active material with high specific capacity for lithium-organic batteries	39
Rational design of 3DOM porous TiO2 matrix decorated with Co nanoparticles as novel sulfur hosts for high-performance lithium-sulfur batteries	39
Methylene blue elimination by magnetic ferric oxide-decorated and sulfonated sugarcane bagasse-derived porous carbon via catalysis Fenton reaction	38
Yolk-shell Co-glycerate@Fe-Co Prussian blue analogue spheres for high-performance lithium-ion batteries	38
Study of the microstructure and wear properties of Ti-12Mo-6Zr-2Fe alloy fabricated via selective laser melting	38
Data-driven analysis and prediction of tensile behavior of coir-based composites	38
A novel strategy of regional microstructure design in manufacturing	38
Characterization of closed-surface antireflective TiO2–SiO2 films for application in solar-panel glass	38
Controlling the aspect ratio of silver nanowires in the modified polyol process	37
Preparation and properties of Mg-doped Li-B alloy anode materials for high specific-capacity thermal batteries	37
Fluorinated graphene-containing Al/CuBi2O4 nanothermites for a transient destruction process of microchip	37
Eliminating embrittlement of GH4065A superalloy at intermediate temperature by a novel grain boundary strengthening mechanism	37
A High-Capacity black Phosphorus-Graphite-Sn anode for Lithium-ion batteries	37
Inherited effect of original loading direction on the annealing behavior of a hot-compressed Mg-1.0 wt%Ca sheet	37
Self-healing of indentation damage in Ti2AlC MAX phase ceramics	36
Thermoelectric properties of p-type Si-rich higher manganese silicide for mid-temperature applications	36
Observation of hydrogen trap and hydrogen embrittlement of 430 ferritic stainless steel	36
Constructing CoFe2O4 with cubic structure by Prussian blue to provide high-performance anodes for lithium-ion batteries	36
Artificial neural network approach for predicting tunneling-induced and frequency-dependent electrical impedances of conductive polymeric composites	36
Novel attempts for the assembly of tannic-based coatings in ethanol media	35

Metal-organic frameworks engaged formation of FeSe2/N-doped carbon as anode enables high-performance sodium-ion batteries	35
A coherent atomic configuration model of Ni4Ti3 and its application to atomic-level characterization of precipitation induced strain fields in NiTi alloy	35
Excellent strengthening effect of L12 precipitates on the selective laser melting Al0.3CoCrFeNiCu high entropy alloy via annealing treatment	35
Large-area joining of CF/Epoxy skin and Al alloy web by an advanced continuous resistance spot welding technology to manufacturing wind turbine blade	35
Improvements of microstructure and hardness of lead-free solders doped with Mo nanoparticles	35
Well-designed α-Fe2O3/ZnFe2O4 heterojunction for photocatalytic CO2 reduction to fuels	35
Enhancement of antibacterial activity in CuO/ZnO nanohybrid p-n heterojunctions	35
Visualization of bandgap energy fluctuation in InGaN quantum wells	34
Morphological evolution of electrochromic nanosheet-structured nickel-cobalt oxide thin films	34
Fe+ and Zn+ ion implantation in MgO single crystals	34
Inkjet printing aided patterning of transparent metal mesh for wearable tactile and proximity sensors	34
Preparation of C-Zn functionalized MCM-41 from bagasse heavy ash for adsorption of volatile organic compounds	34
Preparation of a novel dual structure graded cemented carbides induced by bidirectional diffusion	34
Effect of the additive multilayer graphene on the enhanced tribological properties of ultra-coarse WC-Co cemented carbides	34
Electrocatalytic oxidation of formaldehyde using electrospinning porous zein-based polyimide fibers	34
Ink formulation and printing of electrolyte for a doped ceria solid oxide fuel cell	34
Biological and antibacterial properties of chitosan-based coatings with AgNPs and CuNPs obtained on oxidized Ti13Zr13Nb titanium alloy	34
High-temperature damage-tolerance of a hot-rolled brick-and-mortar Ti2Ni/TiNi composite	33
Construction of WO3@In2S3 heterojunction and its photocatalytic performance for NO removal	33
Enhanced stability of MAPbI3 based perovskite solar cells	33
Dried figs like nitrogen-doped graphene oxide anchored cobalt-doped Fe3O4 nanoparticle as sulfur host for high performance Li-S battery	33
Multifunctional superelastic graphene aerogels derived from ambient-dried graphene oxide/camphene emulsions	33
A flexible, sensitive and stable humidity sensor based on an all-polymer nanofiber film	33
Permeability of soil-bentonite cut-off wall backfill material	33
MXene modified by ZnTCPP for sonodynamic treatment of bladder cancer	33
Preparation of membrane-electrode assemblies for alkaline fuel cells: Effect of the ionomeric solution	33
An activatable photosensitizer for discriminative imaging and elimination of Gram-positive bacteria	33
Protrusion friction stir spot welding of dissimilar joints of 6061 aluminum alloy/Copper sheets with Zn interlayer	33
Synthesis of nanostructured sphere-like copper oxide by microwave spray pyrolysis	33
Hot compression behaviors and microstructural evolution of beryllium by vacuum hot pressing	33
Effect of a multi-phase structure on the damping response of a novel high entropy alloy	33
Heat shrinking polymer based film reinforced with two dimensional carbon nitride with enhanced barrier and thermal properties	32
Graphene coated and nitrogen-rich porous carbon composites with sulfur encapusulation as cathode for lithium-sulfur batteries	32
Experimental study on the properties of polyvinyl alcohol fiber reinforced cementitious composites with super early strength	32
A sunflower-like eutectic microstructure in the AlCrFeMnNi2 high-entropy alloy with excellent compressive mechanical properties	32
Behavior of alkali-activated coal ash basalt fiber-reinforced geopolymer nanocomposite incorporated with nano sodium oxide	32
Biological synthesis of Fe2O3 nanomaterials with different morphologies: A comparative study for fluoride remediation	32
Facile fabrication of helical hybrid silica ribbons with high-efficiency circularly polarized luminescence	32
Enhanced phase transfer of Ag-nanospheres using amine-containing amphiphiles for sensitive chemical detection in nonaqueous environments	32
Visible light stimulated binary nanostructure and defect enriched TiO2-SnO2 for photocatalysis and antibacterial activity	32
Enhancing ablation resistance of CuCr contact materials through metallic element doping: First-principles calculations	32
Highly dispersed and low-metal-loading CuOx@BiVO4 for efficient visible-light-driven photocatalysis	32
Effect of shielding gas on MIG welding performance with austenitic wire	31
Development and electrochemical performance of co-doped ceria (Sm0.10Ga0.10Ce0.80O2-δ) electrolyte material for low-temperature solid oxide fuel cell (LT-SOFC)	31
Reviewing carbon nanotube fillers for enhanced conductivity in proton exchange membrane fuel cell bipolar plates	31
Preparation of ZnO hierarchical nanoarchitectures and their photocatalytic performance	31
Wavelength determination of ion-induced ripples	31
Cost effective and low temperature method for the synthesis of MgTiO3 nanoparticles from natural dolomite	31
Influence of atmospheric conditions on the formation and structural properties of two-dimensional SbSI films	31
Homogenizing effects of Co on multi-scale elemental distribution in Ru-containing Ni-based single crystal superalloys	31
Interface engineering of Co3O4 nanoparticle for high-efficiency interfacial solar steam generation	31
An AZO dye with nitril anchoring to dye-sensitized solar cell performance: A theoretical and experimental investigation	31
The state of the art in dynamic mechanical testing of yarns and fabrics: A mini review	31
Tribological properties of matrine in soybean oil as additive	31
Facilitating electroless metalization of blind holes in glass substrates by electrochemical discharge-assisted surface roughening	31
Casting of Fe-(2–12)Mn-(4–14)Al-(0.09–0.7)C low-density steel via artificial slag practice	31
2D/2D nanostructures based on NiCo2O4/graphene composite for high-performance battery-type supercapacitor	31
Composite brazing of high thermal mismatched Cf/SiC and 304 stainless steel with foil (Cu) + Ti5Si3 alloy as filler	31
Anodic MAO coating formation on Ti-25Ta alloy	31
TiO2/Ti3C2Tx composite as an anode material with ideal lithium-ion storage performance	31
Effect of preheating temperature on the defects in pulsed laser welding of sheet AZ31 magnesium alloy	31
Retraction notice to “Fast functionalization of vertically aligned multiwalled carbon nanotubes using oxygen plasma” [Mater. Lett. 70 (2012) 89–93]	31
Microstructure and properties of melt-spun AlYNiCr multi-component amorphous alloy ribbons through partial substitution of Cr for Ni	31
Iron-implanted epitaxial palladium thin films: Structure, ferromagnetism and signatures of spinodal decomposition	30
PAN@PPy nanofibrous membrane with core-sheath structure for solar water evaporation	30
A lightweight Al0.8Nb0.5Ti2V2Zr0.5 refractory high entropy alloy with high specific yield strength	30
Development and characterization of thermal and electro-active shape memory polymer composites using polyester fabric to obtain a large bending effect	30
One-step sintering of porous TiAl3 intermetallics using TiH2 as raw material in thermal explosion reaction	30
Effect of natural aging on mechanical properties and corrosion behavior of 2219 aluminum alloy cold sprayed coatings	30
Influence of synthesis methodology and excess Na on the ionic transport properties of natrium super ionic conductor, Na3Zr2Si2PO12	30
Resin based 3D printing for fabricating reactive porous media	30
Reduction in electrical resistivity and enhancing the thermoelectric power factor of β-FeSi2 bulk materials by Se doping	30
Fabrication of Au decorated MoS2 Langmuir Blodgett film as SERS sensing scaffold for detection of thiram in aqueous solution and in carrot peels	29
Interfacial Engineering of FTO/TiO2 Bilayer for Improved charge separation in BiVO4 photoanodes	29
Silicon-based fluorescent drug delivery composites based on silver nanowires for non-small cell lung cancer therapy	29
Joint effect of electromagnetic casting and high-pressure torsion on the structure and hardening of Al3.3Cu2.5Mn0.5Zr (wt%) alloy	29
Magnetic domain evolution in sintered dual-main-phase (Nd,Ce)–Fe–B magnet during thermal demagnetization	29
Preparation technology of double-layer superhydrophobic anti-corrosion coating	29
Effect of Wire-EDM textures on corrosion performance of Bio-Degradable Mg alloy	29
Low-temperature stabilization of rutile in W-doped Titania thin films deposited by magnetron Co-Sputtering	29

Preparation of cyclodextrin polymer-functionalized polyaniline/porous carbon composites for use in high-performance supercapacitors	29
Effect of silver nanowires on the performance of VTP:PC71BM organic photodiodes	29
Preparation of Si thin films on copper foil using pulse current electrodeposition	29
Waste sugarcane skin-based composite phase change material for thermal energy storage and solar energy utilization	29
Enhancing mechanical properties and microstructural integrity of silica fume-based self-compacting geopolymer concrete through municipal solid waste incineration fly ash incorporation	29
A novelty in the precipitation of the σ-phase in superaustenitic stainless steel weld metals	29
Investigations on a ternary Mg-Ca-Si wrought alloy extruded at moderate temperatures	29
Temperature tunable peak shift near-infrared metamaterial optical absorber with vanadium dioxide phase transition cylinder array	29
Dendrite-like Cu-based micro/nanomaterials fabricated on insulators by shielding ion transportation during electrochemical migration	29
A carbon-nanotube-based bilayer elastomer for spatial pressure sensing	28
Molybdenum disulfide catalyzed co-hydrogenation of coal tar and coking residue	28
Synthesis of Sn-catalyzed Ge nanowires and Ge/Si heterostructures via a gradient method	28
Thermal properties of graphite flakes/aluminum composites: Anisotropy and isotropy	28
5-Chlorobenzoxazole as solid additive for efficient organic solar cells	28
Preparation of MXene and its application in low temperature electrically conductive adhesive	28
Controllable synthesis of rhodium nanorods with dual enzyme-like performance	28
Understanding ductile fracture characteristics of an advanced high strength steel	28
Direct ink writing of copper-based highly conductive tracks on flexible substrate for electronic applications	28
High strain rate induced shear banding within additively manufactured AISI 316L	28
Design and synthesis of different sized polyhedral channel MOF materials for the separation of CO2/N2	28
Effect of atmospheric-pressure nitrogen plasma treatment at low temperature on fatigue properties of low-alloy steels	28
3D printed polymer-matrix loaded with graphene oxide	28
Analyzing microstructural evolution and wear behavior of friction stir welded dissimilar joints of SS304 and 2024-T3 Al alloy	27
Experimental characterization of a polydicyclopentadiene thermoset, study of protective metal-polymer and polymer-metal two-layer structures	27
Relative stability of the metastable D019 and D03 structures in Fe3Ga-type alloys at elevated temperatures	27
Green synthesis of porous carbon for supercapacitors from pine cone/phoenix tree fruit fluff by hydrothermal pre-activation method	27
3D printed PETG/cenosphere syntactic foam composites for lightweight structural applications	27
On characterization of room temperature vulcanizing-liquid silicone rubber with sensing capabilities for novel orthotic shoe sole	27
Influence of heat input on grain size in arc additive manufacturing of 7075 aluminum matrix composites with nano-particles	27
Tailored asymmetric chain strategy for liquid crystal photovoltaic donors to optimize phase behavior and annealing process	27
Influence of surface pretreatment of steel substrate on the interfacial microstructure and tensile properties of laser Al/steel joints	27
Photodetector based on 2H-WSe2 grown by physical vapor deposition method	27
Flexible visible and near-infrared laser detector based on bismuth sulphide nanorods	27
Tensile nanomechanics and dislocation characteristics of size-variational heterogeneous magnesium at 300 K and 600 K	27
Pseudocapacitive charge storage in ultrathin NiCo-metal organic framework-derived NiCo2O4 Li-metal batteries	27
Fabrication of a novel RAFM steel with superior mechanical properties by selective laser melting with in situ oxidation	27
Enhanced H2S gas sensing of Pd functionalized NiO thin films deposited by the magnetron sputtering process	27
Construction and characterization of 3D hollow Ag/AgBr/Bi4Ti3O12 heterojunction photocatalyst: Mechanism investigation of rhodamine B degradation	26
Stability of amorphous Li-La-Zr-Ta-O coating for high-voltage cathodes in sulfide-based solid-state batteries	26
Microstructural and thermal characterization of polyethylene and basalt fiber-reinforced natural zeolite-based engineered geopolymer composites	26
A dual-index quality evaluation method for direct ink writing of soft materials	26
Scalable fabrication of PVDF/SiO2-PTFE fiber membrane for effective daytime radiative cooling	26
Optimization design of gradient porous aluminum	26
Monovalent and polyvalent ion storage in organic–inorganic vanadyl acetate for electrochemical capacitor	26
Highly uniform Fe-based MOFs fabricated by mixed-linker strategy for ring-opening of epoxides with alcohols	26
Mutation in TCP phases and superior stress rupture life led by W/Mo ratio in Ni-based single crystal superalloys	26
Co3O4/SnO2 heterojunctions formed as porous nanocubes with remarkable sensitivity and selectivity to acetone gas	26
Micromodification of nickel-based coatings electrodeposited from a deep eutectic solvent with lanthanum as a way to improve electrocatalytic performance and corrosion resistance	25
Tailoring surface strain of Ru nanoparticles on carbon layers for accelerating hydrogen evolution reaction	25
Combination of electrical and photonic sintering of silver nanowires for flexible transparent electrode with high transmittance	25
Microstructure and damping capacity of high-temperature damping ZA27/7075Al composites prepared by friction stir processing	25
Effect of microstructural orientation on the mechanical properties of 316LN at 77 K and 298 K produced by wire arc additive manufacturing process	25
Investigating UV photodetector capabilities of Pd-functionalized NiO thin films with interdigitated Pt electrodes	25
β-Cobalt phthalocyanine sono-immobilized on carbon cloth for efficient electrochemical reduction of CO2-to-CO	25
Fabrication of BiOCl nanosheets with oxygen vacancies via a novel strategy for enhanced photocatalytic degradation of rhodamine B	25
Enhancement of peroxymonosulfate activation through regulating electronic structure of cobalt phthalocyanine by g-C3N4 for rhodamine B degradation	25
Synthesis, characterization and thermophysical properties of PAG-Amine functionalized graphene quantum dots based nanosuspension	25
Machine learning-assisted design of filler for laser welding of Al-Zn-Mg-Cu alloy	25
Easily coating to significantly enhance the anti-hygroscopic characteristics of AN	25
Preparation of the superhydrophobic polytetrafluoroethylene (PTFE) surface by doped copper to alter microtexture characteristics	25
Influence of femtosecond laser textured shapes on the friction characteristics of 7075 aluminum alloy	25
Growth of {10 1¯	25
Ultra-strong and conductive graphene fiber via sacrificial layer technology	25
Wetting and imbibition Cr2AlC by liquid Ga: Partial substitution of aluminum by gallium in the MAX phase	25
Silver modified surface using the microwave-assisted combustion method for ZnO to enhanced acetone sensing performance	25
Enhancing the electrical performance of AgNi contact material by doping Ag2WO4	25
Quantitative study on mechanical anisotropy of textures in an Al-Cu-Li alloy	25
Phonons in MoS2:	25
The improvement of dry sliding tribological properties by designing nano-primary cementite in bainitic/martensitic matrix microstructure in hypereutectoid PM components	25
Editorial Board	25
Propagation mechanism of crack in adiabatic shear band of PM Ti-6Al-4V during hot deformation	25
Bacterial inhibition and biofilm eradication ability of low-toxic deep eutectic solvents prepared from lactic acid and quaternary ammonium compounds	24
CoO nanocrystals dispersed in N-doped carbon networks as enhanced anode for lithium storage	24
Excellent microwave absorption properties of a nitrided Y2Fe12Co4Si alloy	24
Fabrication and characterization of free-standing α-MnO2/AC composite electrodes for Na-Ion batteries	24
Temperature-dependent dielectric properties of ZnO-CuO nanocomposite	24
Comparative study of methods for measuring energy density for dielectric capacitors	24
A novel insight of solid–liquid interaction effect during laser hybrid manufacturing Ti2AlNb alloy	24
Cu-bearing stainless steel inhibits biofilm by modulating bacterial motility	24
Enhanced n-butanol sensing performance of Co3O4/LaFeO3 nanocomposites	24
Preparation and mechanism of black LiTaO3 wafer with controlled transmission efficiency of light and resistivity by reduction method	24
A simple and environmentally friendly method for preparing graphitic carbon nitride with high specific surface area	24
Grape-liked Si@Na2SiO3 composites for stable lithium storage though a metal salt-assisted chemical etching approach	24
Synthesis and characterisation of PEG-coated CoFe2O4-based nanoparticles as anticancer nano-delivery systems	24
Novel approach to obtain antibacterial nanospike surface by titanium bulk nanostructuring followed by ion irradiation	24
Er-modified AlSi7Mg alloy with high-density cellular structure and nano precipitates produced by selective laser melting	24
Microstructure and properties of ER120S-G and SS316L bimetallic structures manufactured via Arc-based direct energy deposition with woven trajectory	24
Hierarchical porous Mn-Nx-doped carbons with ultrahigh surface area for effective electrocatalytic oxygen reduction	24
Microstructural investigation of the deformed volume beneath quasi-static and dynamic indentation in Ni single crystal	24
Abnormal oxidation behaviors of Cr additions on AlMo0.5NbTa0.5TiZr refractory high-entropy alloy	24
Shear-thickening effect in electrorheological fluid-assisted polishing	23
Electrocatalytic selective oxidation of glycerol to glyceric acid over efficient Pt/CNTs-CeO2 catalysts	23
Magnetic carbon composites derived from biomass with excellent microwave absorption capacity	23
Influence of SLM process parameters on the microstructure and mechanical properties of Ti-1023 alloy	23
On the low-cycle fatigue of a 316L-type steel produced by selective laser melting and annealing	23