Materials Letters

Article	Citations
A novel strategy of regional microstructure design in manufacturing	119
K-ion modified V2O5 with abundant oxygen defects as cathode for aqueous zinc-ion battery	98
Anomalous reaction of Saucedo-etching on CdZnTeSe crystal	86
Stable high-nickel austenitic steel produced by electron beam additive manufacturing using dual wire-feed system	84
Spontaneous formation of skyrmion structure in a hard magnetic film with low coercivity	80
Dried figs like nitrogen-doped graphene oxide anchored cobalt-doped Fe3O4 nanoparticle as sulfur host for high performance Li-S battery	77
Synthesis of nanostructured sphere-like copper oxide by microwave spray pyrolysis	69
An activatable photosensitizer for discriminative imaging and elimination of Gram-positive bacteria	66
Strong magnetic response regulated by layer-stacking perturbations in an Aurivillius-phase oxide	65
Enhanced phase transfer of Ag-nanospheres using amine-containing amphiphiles for sensitive chemical detection in nonaqueous environments	65
Reversible switching of wettability based on shape memory effect	65
Structural and transport properties of mechanochemically synthesized La0.9Ba0.1F2.9 and La0.9Ba0.05Ca0.05F2.9	64
Preparation of a novel dual structure graded cemented carbides induced by bidirectional diffusion	62
Iodide-induced galvanic replacement of nickel film on copper as activator for electroless nickel-phosphorus plating	60
Bronze TiO2-MXene heterostructures for dramatic enhancement of photocatalytic degradation of tetracycline under visible light	59
Preparation and properties of Mg-doped Li-B alloy anode materials for high specific-capacity thermal batteries	59
Novel attempts for the assembly of tannic-based coatings in ethanol media	59
Conjugated polycopper phthalocyanine as the anode-active material with high specific capacity for lithium-organic batteries	57
Morphological evolution of electrochromic nanosheet-structured nickel-cobalt oxide thin films	54
Eliminating embrittlement of GH4065A superalloy at intermediate temperature by a novel grain boundary strengthening mechanism	53
Experimental study on the properties of polyvinyl alcohol fiber reinforced cementitious composites with super early strength	52
Physical and microstructural properties of YSZ + Cr2O3 thermal barrier coatings developed using HVOF technique	52
Construction of layer-by-layer self-assembly coatings based on hemicyanine derivative for photodynamic antimicrobial application	50
Incorporation of P2O5 in a Na2O-rich aluminoborosilicate glass	49
HCOO− ions mediated formation of cupric subcarbonate (Cu2(OH)2CO3) with various hierarchical micro/nanostructure via facile and mild solution route	48

Multifunctional superelastic graphene aerogels derived from ambient-dried graphene oxide/camphene emulsions	48
Enhancing ablation resistance of CuCr contact materials through metallic element doping: First-principles calculations	48
Iron-implanted epitaxial palladium thin films: Structure, ferromagnetism and signatures of spinodal decomposition	48
Tribological properties of matrine in soybean oil as additive	48
Editorial Board	47
Isolation and characterization of hemicellulose blended carboxymethylcellulose films incorporated with lithium perchlorate as a potential ion conductive biopolymer	47
Polydopamine-loaded microneedles for sequential tumor ablation and osteochondral regeneration	47
Flexible nonlinear photonics of heterostructured MXene-derived quantum dots	47
Retraction notice to “Fast functionalization of vertically aligned multiwalled carbon nanotubes using oxygen plasma” [Mater. Lett. 70 (2012) 89–93]	46
One-step synthesis of needle-like lanthanum-doped TiO2 nanomaterials and their photoconductivity activity in air medium	46
High temperature environmental scanning electron microscopy characterization of transient phase formation during conversion of simulated nuclear waste feed to glass	46
Visible light-modulated switching behavior of CZTSSe-based synaptic memristor	45
Effect of electropulsing treatment on microstructure and mechanical properties of 316L stainless steel fabricated by selective laser melting	45
Influence of synthesis methodology and excess Na on the ionic transport properties of natrium super ionic conductor, Na3Zr2Si2PO12	44
Reviewing carbon nanotube fillers for enhanced conductivity in proton exchange membrane fuel cell bipolar plates	44
Homogenizing effects of Co on multi-scale elemental distribution in Ru-containing Ni-based single crystal superalloys	43
Rational design of 3DOM porous TiO2 matrix decorated with Co nanoparticles as novel sulfur hosts for high-performance lithium-sulfur batteries	43
Effect of piezoelectric field on the photocatalysis of layered BiOI microspheres under ultrasonication-induced deformation	43
Cost effective and low temperature method for the synthesis of MgTiO3 nanoparticles from natural dolomite	42
Enhanced stability of MAPbI3 based perovskite solar cells	42
Deformation behavior and microstructure of Mg-13Gd-4Y-2Zn-0.5Zr alloy during the rotating forward extrusion process	42
Waste sugarcane skin-based composite phase change material for thermal energy storage and solar energy utilization	42
Influence of contacts in 2D infill patterns on mechanical properties of 3D printed concrete structures	42
Stability of amorphous Li-La-Zr-Ta-O coating for high-voltage cathodes in sulfide-based solid-state batteries	41
Observation of hydrogen trap and hydrogen embrittlement of 430 ferritic stainless steel	41
Visualization of bandgap energy fluctuation in InGaN quantum wells	40
Influence of atmospheric conditions on the formation and structural properties of two-dimensional SbSI films	40
3D-printable wound patch composed of vitamin E-enriched polylactic acid scaffolds	39
Facile synthesis of Ti3+/Ti4+ co-doped FeOCl with solar-light enhanced Fenton activity	39
Evaluating magnetic degradation in FeCo-V alloys for high-output and compact electric motors: A multiscale-multiphysics approach	39
Preparation of membrane-electrode assemblies for alkaline fuel cells: Effect of the ionomeric solution	39
Efficient catalytic oxidation of ethanol over Pt/Ce-Mn-Ti-O catalysts supported on cordierite honeycombs	39
Effect of preheating temperature on the defects in pulsed laser welding of sheet AZ31 magnesium alloy	38
Permeability of soil-bentonite cut-off wall backfill material	38
Effect of the additive multilayer graphene on the enhanced tribological properties of ultra-coarse WC-Co cemented carbides	38
Well-designed α-Fe2O3/ZnFe2O4 heterojunction for photocatalytic CO2 reduction to fuels	38
Viscous plastic flow in contact layers as a method of stress relaxation in dry sliding of steel against steel under electric current	38
Visible light stimulated binary nanostructure and defect enriched TiO2-SnO2 for photocatalysis and antibacterial activity	38
Synthesis of Sn-catalyzed Ge nanowires and Ge/Si heterostructures via a gradient method	38
Improvements of microstructure and hardness of lead-free solders doped with Mo nanoparticles	37
Influence of heat input on grain size in arc additive manufacturing of 7075 aluminum matrix composites with nano-particles	37
Yolk-shell Co-glycerate@Fe-Co Prussian blue analogue spheres for high-performance lithium-ion batteries	37
A carbon-nanotube-based bilayer elastomer for spatial pressure sensing	37
Metal-organic frameworks engaged formation of FeSe2/N-doped carbon as anode enables high-performance sodium-ion batteries	37
On characterization of room temperature vulcanizing-liquid silicone rubber with sensing capabilities for novel orthotic shoe sole	37
Self-healing of indentation damage in Ti2AlC MAX phase ceramics	36
Hot compression behaviors and microstructural evolution of beryllium by vacuum hot pressing	36
Direct ink writing of copper-based highly conductive tracks on flexible substrate for electronic applications	36
Facile synthesis, structural and optical characterizations of Bi12ZnO20 sillenite crystals: Application for Cefuroxime removal from wastewater	36
Reduction in electrical resistivity and enhancing the thermoelectric power factor of β-FeSi2 bulk materials by Se doping	36

Influence of surface pretreatment of steel substrate on the interfacial microstructure and tensile properties of laser Al/steel joints	35
Large-area joining of CF/Epoxy skin and Al alloy web by an advanced continuous resistance spot welding technology to manufacturing wind turbine blade	35
High strain rate induced shear banding within additively manufactured AISI 316L	35
Rare-earth metal multicomponent perovskite as a electrocatalyst for water splitting	35
Fabrication of Au decorated MoS2 Langmuir Blodgett film as SERS sensing scaffold for detection of thiram in aqueous solution and in carrot peels	35
Thermal properties of graphite flakes/aluminum composites: Anisotropy and isotropy	34
5-Chlorobenzoxazole as solid additive for efficient organic solar cells	34
Effects of substitutional doping and vacancy formation on the structural and electronic properties of siligene: A DFT study	34
Protrusion friction stir spot welding of dissimilar joints of 6061 aluminum alloy/Copper sheets with Zn interlayer	34
3D printed polymer-matrix loaded with graphene oxide	34
Composite brazing of high thermal mismatched Cf/SiC and 304 stainless steel with foil (Cu) + Ti5Si3 alloy as filler	34
Resin based 3D printing for fabricating reactive porous media	34
Development and characterization of thermal and electro-active shape memory polymer composites using polyester fabric to obtain a large bending effect	34
High-temperature damage-tolerance of a hot-rolled brick-and-mortar Ti2Ni/TiNi composite	34
Experimental characterization of a polydicyclopentadiene thermoset, study of protective metal-polymer and polymer-metal two-layer structures	34
Understanding ductile fracture characteristics of an advanced high strength steel	34
A novelty in the precipitation of the σ-phase in superaustenitic stainless steel weld metals	33
A dual-index quality evaluation method for direct ink writing of soft materials	33
Excellent strengthening effect of L12 precipitates on the selective laser melting Al0.3CoCrFeNiCu high entropy alloy via annealing treatment	33
Optimization design of gradient porous aluminum	33
MXene modified by ZnTCPP for sonodynamic treatment of bladder cancer	33
On the yield stress anomaly in a B2-ordered refractory AlNbTiVZr0.25 high-entropy alloy	33
Scalable fabrication of PVDF/SiO2-PTFE fiber membrane for effective daytime radiative cooling	33
Study of the microstructure and wear properties of Ti-12Mo-6Zr-2Fe alloy fabricated via selective laser melting	33
Fe+ and Zn+ ion implantation in MgO single crystals	33
Carbon-coated SiO for LIBs with superior capacity and cycle stability	33
Artificial neural network approach for predicting tunneling-induced and frequency-dependent electrical impedances of conductive polymeric composites	33
Inkjet printing aided patterning of transparent metal mesh for wearable tactile and proximity sensors	32
Thermoelectric properties of p-type Si-rich higher manganese silicide for mid-temperature applications	32
Flexible visible and near-infrared laser detector based on bismuth sulphide nanorods	32
Preparation of MXene and its application in low temperature electrically conductive adhesive	32
High toughness 3D printed white Portland cement-based materials with glass fiber textile	32
Enhancement of antibacterial and cytocompatibility of Ti by Zn-doped BST coatings	32
Enhancement of antibacterial activity in CuO/ZnO nanohybrid p-n heterojunctions	32
Design and synthesis of different sized polyhedral channel MOF materials for the separation of CO2/N2	32
Microstructure and properties of melt-spun AlYNiCr multi-component amorphous alloy ribbons through partial substitution of Cr for Ni	32
Templated synthesis of nano-LiCoO2 cathode for lithium-Ion batteries with enhanced rate capability	32
Mo-Se-N dry lubricant coatings as a universal solution for protecting surfaces of complex 3D parts	32
Facilitating electroless metalization of blind holes in glass substrates by electrochemical discharge-assisted surface roughening	32
Tensile nanomechanics and dislocation characteristics of size-variational heterogeneous magnesium at 300 K and 600 K	31
Analyzing microstructural evolution and wear behavior of friction stir welded dissimilar joints of SS304 and 2024-T3 Al alloy	31
Effect of natural aging on mechanical properties and corrosion behavior of 2219 aluminum alloy cold sprayed coatings	31
Wavelength determination of ion-induced ripples	31
Data-driven analysis and prediction of tensile behavior of coir-based composites	31
Fabrication of a novel RAFM steel with superior mechanical properties by selective laser melting with in situ oxidation	31
Molybdenum disulfide catalyzed co-hydrogenation of coal tar and coking residue	31
Anodic MAO coating formation on Ti-25Ta alloy	31
Interface engineering of Co3O4 nanoparticle for high-efficiency interfacial solar steam generation	31
Highly dispersed and low-metal-loading CuOx@BiVO4 for efficient visible-light-driven photocatalysis	31
A coherent atomic configuration model of Ni4Ti3 and its application to atomic-level characterization of precipitation induced strain fields in NiTi alloy	31
Ink formulation and printing of electrolyte for a doped ceria solid oxide fuel cell	31
Controllable synthesis of rhodium nanorods with dual enzyme-like performance	31
Heat shrinking polymer based film reinforced with two dimensional carbon nitride with enhanced barrier and thermal properties	31
Effect of atmospheric-pressure nitrogen plasma treatment at low temperature on fatigue properties of low-alloy steels	31
Nitrogen-doped cotton stalk porous carbon composite as anode material for Lithium-ion battery	30
TiO2/Ti3C2Tx composite as an anode material with ideal lithium-ion storage performance	30
Low resistivity and near-zero temperature drift ZrB2-Ag composite films prepared by DC magnetron co-sputtering	30
Relative stability of the metastable D019 and D03 structures in Fe3Ga-type alloys at elevated temperatures	30
Facile fabrication of helical hybrid silica ribbons with high-efficiency circularly polarized luminescence	30
Highly uniform Fe-based MOFs fabricated by mixed-linker strategy for ring-opening of epoxides with alcohols	30
Pseudocapacitive charge storage in ultrathin NiCo-metal organic framework-derived NiCo2O4 Li-metal batteries	30
A High-Capacity black Phosphorus-Graphite-Sn anode for Lithium-ion batteries	30
Additive manufacturing of high relative density Cu-0.8Cr alloy by low power 1064 nm Yb-fiber laser powder bed fusion: Role of Nano-TiC modification	30
An antibacterial coaxial electrospun polylactic acid/silk fibroin loaded with nano-ZnO and Voltaren	30
Effect of combined rolling with subsequent aging on the structure, mechanical and fatigue properties of β titanium alloy	30
2D/2D nanostructures based on NiCo2O4/graphene composite for high-performance battery-type supercapacitor	30
One-step sintering of porous TiAl3 intermetallics using TiH2 as raw material in thermal explosion reaction	30
Preparation of cyclodextrin polymer-functionalized polyaniline/porous carbon composites for use in high-performance supercapacitors	29
Electrocatalytic oxidation of formaldehyde using electrospinning porous zein-based polyimide fibers	29
Preparation of Si thin films on copper foil using pulse current electrodeposition	29
Constructing CoFe2O4 with cubic structure by Prussian blue to provide high-performance anodes for lithium-ion batteries	29
Photodetector based on 2H-WSe2 grown by physical vapor deposition method	29
Development and electrochemical performance of co-doped ceria (Sm0.10Ga0.10Ce0.80O2-δ) electrolyte material for low-temperature solid oxide fuel cell (LT-SOFC)	29
Dendrite-like Cu-based micro/nanomaterials fabricated on insulators by shielding ion transportation during electrochemical migration	29
Construction of WO3@In2S3 heterojunction and its photocatalytic performance for NO removal	29
Magnetic domain evolution in sintered dual-main-phase (Nd,Ce)–Fe–B magnet during thermal demagnetization	29
Fabricating boride layer on the titanium surface to optimize microstructure of the Ti/Al interface reaction zone	29
Fluorinated graphene-containing Al/CuBi2O4 nanothermites for a transient destruction process of microchip	29
Effect of silver nanowires on the performance of VTP:PC71BM organic photodiodes	29
Investigations on a ternary Mg-Ca-Si wrought alloy extruded at moderate temperatures	29

Characterization of closed-surface antireflective TiO2–SiO2 films for application in solar-panel glass	29
Graphene coated and nitrogen-rich porous carbon composites with sulfur encapusulation as cathode for lithium-sulfur batteries	29
Construction and characterization of 3D hollow Ag/AgBr/Bi4Ti3O12 heterojunction photocatalyst: Mechanism investigation of rhodamine B degradation	29
Methylene blue elimination by magnetic ferric oxide-decorated and sulfonated sugarcane bagasse-derived porous carbon via catalysis Fenton reaction	29
3D printed PETG/cenosphere syntactic foam composites for lightweight structural applications	29
Joint effect of electromagnetic casting and high-pressure torsion on the structure and hardening of Al3.3Cu2.5Mn0.5Zr (wt%) alloy	29
Preparation technology of double-layer superhydrophobic anti-corrosion coating	28
Al2O3@LiMn2O4 nanoparticles cathodes for high-rate Li-ion batteries	28
A flexible, sensitive and stable humidity sensor based on an all-polymer nanofiber film	28
Biological and antibacterial properties of chitosan-based coatings with AgNPs and CuNPs obtained on oxidized Ti13Zr13Nb titanium alloy	28
Preparation of C-Zn functionalized MCM-41 from bagasse heavy ash for adsorption of volatile organic compounds	28
Temperature tunable peak shift near-infrared metamaterial optical absorber with vanadium dioxide phase transition cylinder array	28
Cast WC-Co alloy-based tool manufacturing using a polymeric mold prepared via digital light processing 3D printing	28
A lightweight Al0.8Nb0.5Ti2V2Zr0.5 refractory high entropy alloy with high specific yield strength	28
PAN@PPy nanofibrous membrane with core-sheath structure for solar water evaporation	28
The state of the art in dynamic mechanical testing of yarns and fabrics: A mini review	28
Silicon-based fluorescent drug delivery composites based on silver nanowires for non-small cell lung cancer therapy	28
Effect of a multi-phase structure on the damping response of a novel high entropy alloy	28
Mutation in TCP phases and superior stress rupture life led by W/Mo ratio in Ni-based single crystal superalloys	28
Casting of Fe-(2–12)Mn-(4–14)Al-(0.09–0.7)C low-density steel via artificial slag practice	28
Inherited effect of original loading direction on the annealing behavior of a hot-compressed Mg-1.0 wt%Ca sheet	28
Effect of shielding gas on MIG welding performance with austenitic wire	27
Design of MOF-based nanobiocatalyst with super-catalytic properties with iron mineralization approach	27
Green synthesis of porous carbon for supercapacitors from pine cone/phoenix tree fruit fluff by hydrothermal pre-activation method	27
Superior antifouling properties of a CoCrFeMnNi high-entropy alloy	27
Phase transition induced thermoelectric properties of Cu2Te by melt growth process	27
Preparation of ZnO hierarchical nanoarchitectures and their photocatalytic performance	27
Turning waste into treasure: Carbonized walnut shell for solar-driven water evaporation	27
Self-supported NiFeS2/NiFe-LDH nanoflowers for high-efficiency oxygen evolution	27
A sunflower-like eutectic microstructure in the AlCrFeMnNi2 high-entropy alloy with excellent compressive mechanical properties	27
An AZO dye with nitril anchoring to dye-sensitized solar cell performance: A theoretical and experimental investigation	27
Enhancing mechanical properties and microstructural integrity of silica fume-based self-compacting geopolymer concrete through municipal solid waste incineration fly ash incorporation	27
Enhanced H2S gas sensing of Pd functionalized NiO thin films deposited by the magnetron sputtering process	27
Behavior of alkali-activated coal ash basalt fiber-reinforced geopolymer nanocomposite incorporated with nano sodium oxide	27
Controlling the aspect ratio of silver nanowires in the modified polyol process	27
A study of high damping capacities and mechanical properties of cast Mg-Gd binary alloys	27
Phase decomposition upon heat-treatment of a eutectoid Ti-Fe alloy processed by dual-wire-arc additive manufacturing	27
Low-temperature stabilization of rutile in W-doped Titania thin films deposited by magnetron Co-Sputtering	27
Biological synthesis of Fe2O3 nanomaterials with different morphologies: A comparative study for fluoride remediation	27
A novel nanocomposite platform of mercaptopropionic acid stabilized CdSe quantum dots-graphene for impedimetric detection of low density lipoprotein	26
Influence of alkali element post-deposition treatment on the performance of the CIGS solar cells on flexible stainless steel substrates	26
Role of hydrogen in the post-annealing treatments for amorphous In-Ga-Zn oxide thin films	26
Monovalent and polyvalent ion storage in organic–inorganic vanadyl acetate for electrochemical capacitor	26
Effect of Wire-EDM textures on corrosion performance of Bio-Degradable Mg alloy	26
Preparation and properties of the inclusion complex of chlorohexidine with β-Cyclodextrin	26
The phase regulation of Bi4O5I2 nanosheets through the controlled hydrolysis in polyhydric alcohol for the enhanced photocatalytic performances of BPA	26
Biosynthesized metallic nanocatalysts in the removal and degradation of pollutants	26
A rare earth free magnesium alloy with exceptional thermal stability and enhanced mechanical properties	26
Physicochemical properties and structural evolution of synthetic substituted bioceramic in nano regime	26
Formation of diffusion micro-pairs in the Ni68Mo20Al12 alloy	26
Microstructural and thermal characterization of polyethylene and basalt fiber-reinforced natural zeolite-based engineered geopolymer composites	26
Co3O4/SnO2 heterojunctions formed as porous nanocubes with remarkable sensitivity and selectivity to acetone gas	25
On the low-cycle fatigue of a 316L-type steel produced by selective laser melting and annealing	25
Effect of pressure on the structure and properties of biomedical porous zinc fabricated by protein foaming route	25
The growth behavior of Al2Cu phase in confined spaces constituted by γ–Al2O3 particle clusters	25
Editorial Board	25
Easily coating to significantly enhance the anti-hygroscopic characteristics of AN	25
Investigating UV photodetector capabilities of Pd-functionalized NiO thin films with interdigitated Pt electrodes	25
Editorial Board	25
Microstructure and mechanical properties of Ni-17Cr-xCo ternary alloys fabricated via field-assisted sintering	25
Highly sensitive and self-powered ultraviolet photodetector based on GaN/poly(styrenesulfonate)/polyaniline hybrid heterojunction	25
Preparation of the superhydrophobic polytetrafluoroethylene (PTFE) surface by doped copper to alter microtexture characteristics	25
The improvement of dry sliding tribological properties by designing nano-primary cementite in bainitic/martensitic matrix microstructure in hypereutectoid PM components	25
Effect of microstructural orientation on the mechanical properties of 316LN at 77 K and 298 K produced by wire arc additive manufacturing process	25
Hot oscillatory pressure preparing low-cost FGH4096 superalloys with high performance	25
Effect of stress-induced martensite ageing on the one-way and two-way shape memory effect of [0 1 1]-oriented TiNiCu crystals under tension	24
Synthesis of novel Al2O3 nanoparticle organic hybrid materials for enhancing the CO2-separation performance of prepared Al2O3-NOHMs/Pebax mixed matrix membrane	24
Detection of carbohydrate antigen 19-9 by a diamond solution-gate field-effect transistor sensor	24
Photoelectrochemical detection of circulation tumor cell based on metal-organic framework with incorporated copper peroxide nanodots as probe	24
Effects of sintering temperature on interface microstructure and element diffusion of WC-Co-Ni-Fe/high-speed steel composites	24
Quantitative study on mechanical anisotropy of textures in an Al-Cu-Li alloy	24
Growth of {10 1¯	24
Microstructure and damping capacity of high-temperature damping ZA27/7075Al composites prepared by friction stir processing	24
Triphala decorated multipotent green nanoparticles and its applications	24
Development of microstructure and properties within oxide dispersion strengthened steel directly consolidated by hot rotary swaging	24
Low cost and highly sensitive flexible pressure sensor based on branched micro-structures	24
Effect of sputtering pressure on the electrochromic properties of flexible NiO films prepared by magnetron sputtering	24
3D printing of complex ceramic dental implant abutments by using Direct Inkjet Printing	24
Crash precipitation of nanoscale β-phase PVDF particles	24
Effects of press down volumes on the microstructure and mechanical properties of hybrid in situ point-mode forging and laser additive manufactured Ti-6Al-4V	24
Molten salt-assisted fabrication of hierarchical porous carbon derived from lignite for Zn-ion hybrid supercapacitors	24
Influence of femtosecond laser textured shapes on the friction characteristics of 7075 aluminum alloy	24
Phonons in MoS2:	24
The structural, optical, antimicrobial and anticancer properties of biocompatible astaxanthin coated ZnO and CeO2 nanoparticles	23
Polyaniline-based electrodes for flexible woven triboelectric nanogenerators	23
Combination of electrical and photonic sintering of silver nanowires for flexible transparent electrode with high transmittance	23
Preparation and thermoelectric properties of high-entropy (Bi2/3Sb1/3)2(Te2/5Se2/5S1/5)3 alloy	23
One-step electrodeposition of superhydrophobic copper coating from ionic liquid	23
Ultrasonic degassing of molten magnesium and its alloys by cavitation	23
Machine learning-assisted design of filler for laser welding of Al-Zn-Mg-Cu alloy	23
Correlation between morphology and resistive switching behaviour of WO3 nanostructures	23
Benzonitrile/pyridylbenzoimidazole hybrid electron-transport material for efficient phosphorescence and TADF OLEDs	23
Silver modified surface using the microwave-assisted combustion method for ZnO to enhanced acetone sensing performance	23
An eco-friendly BaTiO3/gelatin composite for flexible and reusable piezoelectric nanogenerators	23
Coactive impact of a novel multifunctional alum co-adsorbent for dye-sensitized solar cells DSSC	23