Mechanics of Materials

Article	Citations
Modelling the effect of temperature on the plastic deformation of high-density polyethylene (HDPE): a semi-empirical approach	76
A concurrent multiscale simulation for nonlinear flexural and postbuckling analyses of single-layer graphene sheets at finite temperature	67
Interfacial heat transfer characteristics and thermal expansion behavior of heterostructure materials in arc-heated wind tunnel	65
Editorial Board	56
Experimental investigation of the behaviour of a simulant material for plastic-bonded explosives and modelling of the effectivity and damage induced anisotropy	54
Mechanics and modeling of cold rolling of polymeric films at large strains — A rate-independent approach	53
Formulation for zirconia toughened alumina (ZTA) reinforced metal matrix composites based on a three-phase concentric inclusion model	53
Peridynamic investigation of dynamic damage behaviors of PBX confined in spherical steel shells	52
An additive Mori–Tanaka scheme for elastic–viscoplastic composites based on a modified tangent linearization	46
Curing-dependent thermo-viscoelastic and shrinkage behaviour of photopolymers	46
Evaluation of NiTi under low-amplitude cyclic loading by means of thermographic harmonic analysis	43
Influence of uniform temperature variations on hybrid bonded joints with a circular or tubular cross-sectional area	42
Predicting the double-yield phenomenon in low-density polyethylene film using three-network viscoplastic model	41
Instability of nanoribbons on concave substrates	40
Propagation and scattering of SH waves in non-homogeneous unsaturated half-space with a circular cavity	40
A simple design rule for variable thickness shell based architected materials with improved stiffness	40
Lithiation-induced stress and damage in electrode materials: Effects of current variations	37
A damage model of characterizing the internal damage evolution for DN hydrogel using Multi-Particle Tracking (MPT) method	37
Liquid metal-filled phase change composites with tunable stiffness: Computational modeling and experiment	36
Modeling for the role of fiber–matrix coupling on the torsion-induced Poynting effect in biological tissues	36
Plasticity and fracture properties of laser powder bed fusion fabricated 316L stainless steel - Experimental and numerical investigations	35
Size-dependent mechanical properties of cellulose-based materials: Experiments and theoretical model	35
In-plane elastic waves in piezoelectric metamaterials with Parity–Time symmetry	35
Poro-mechanical analysis of a structural battery electrolyte: Experimental study and model calibration	34
Multifunctional design of lattice metamaterial with desired thermal expansion behaviors using topology optimization	34

Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis	33
Stimuli–responsive programmable mechanics of bi-level architected nonlinear mechanical metamaterials	33
Role of pre-existing dislocation network on the shock responses of single crystal tantalum	33
Formation mechanism of shear band in Fe70Co5Ni8Ta6W11 high-entropy alloy under quasi-static loading	32
Multiscale framework for estimation of elastic properties of Poly ethylene terephthalate from the crystallization temperature	31
Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries	31
Mechanical properties and deformation mechanisms of single crystal Mg micropillars subjected to high-strain-rate C-axis compression	31
A new multiscale model for ferroelectric materials considering hysteresis	31
Micromechanical modeling of the effects of crystal content on the visco-hyperelastic-viscoplastic behavior and fracture of semi-crystalline polymers	31
Statistical volume-based failure prediction of a quasi-brittle epoxy resin	30
Mechanical structure–property relations in flexible silica-aerogels	30
Elastoplastic damage analysis and structural optimization of soluble bridge plug based on phase field method	30
GHz surface waves in Al/LiTaO3/Si composite: Effect of the Drude electrode on dispersion, attenuation and mode shapes	29
Effect of porous microstructure and fiber arrangement of thermal protection composites on effective thermal conductivity	29
Assessment of iterated variational homogenization for microstructure evolution in porous materials	29
Numerical and analytical study to the uniqueness problem in identification of uniaxial parameters through spherical indentation	29
Mechanical properties of graphene nanoplatelets containing random structural defects	29
The effect of initial texture on multiple necking formation in polycrystalline thin rings subjected to dynamic expansion	28
Stress effects on interaction modes and cross-slip annihilation distance of screw dislocation interactions	28
Shape transformers for crashworthiness of additively manufactured engineering resin lattice structures: Experimental and numerical investigations	28
Artificial neural network model of the mechanical behaviour of shape memory alloy Schwartz primitive lattice architectures	27
Modeling solvent diffusion in amorphous polymers spanning glass transition region	27
Editorial Board	27
Micro-mechanical properties characterization of shot peening strengthened layer with nanoindentation	27
A micromechanical study of damage effect on the temperature dependent yield strength of particle-reinforced metal matrix composites	27
Contact of an inflated circular magnetoelastic membrane with a rigid substrate under magnetic actuation	26
Editorial Board	26
Enhancing robustness in machine-learning-accelerated molecular dynamics: A multi-model nonparametric probabilistic approach	26
Axisymmetric necking of a circular electrodes-coated dielectric membrane	26
Characterizing friction coefficients of soft materials via stick-slip data in static friction: Mechanism analysis and experimental validation	25
Tailorable piezoelectric and flexoelectric output of a polymer-particle composite	25
Examining the impact of asymmetry in lattice-based mechanical metamaterials	25
On the yield criterion of two-scale porous materials by using Eshelby-type velocity field and Steigmann–Ogden surface model	25
Investigating surface effect on stress concentration in amorphous carbon materials with nano-scale pores: A molecular dynamics study	24
Atomistically calibrated Tsai-Wu criterion for orthotropic layered 2D materials and interpreting accuracy – A study on failure of hBN	23
The cylindrical mechanical metamaterial with high-level thermal-mechanical stabilities and high dynamic stiffness	23
Spall characteristics of three-dimensional graphene networks with embedded copper: A molecular dynamics study	23
Integrated experiment and simulation co-design: A key infrastructure for predictive mesoscale materials modeling	23
Understanding the torsional mechanical behavior of twisting carbon nanotube ribbon with different boundary conditions	23
Determination of elastoplastic properties in anisotropic materials with cubic symmetry by instrumented indentation	23
Mechanical behavior and constitutive model of NEPE solid propellant in finite deformation	22
Computation of energy evolution during the dynamic fracture of elastomers using the finite viscoelastic model: Its implementation in Abaqus	22
Micromechanics-based constitutive modeling of hard-magnetic soft materials	22
On modeling fracture of soft polymers	22
Soft orthotropic hyperelastic lattice structures: Numerical homogenization and experimental validation	22
Low cycle fatigue behaviour of engineering metallic materials: Review on cyclic deformation micro-mechanism	22
Numerical simulation of band gap characteristics for periodically arranged curvilinear fiber laminated plates	22
Editorial Board	21
Study on the dynamics evaluation method of thermal-friction coupled sensitivity for typical high-energy explosives	21
A finite deformation constitutive model for brain white matter considering the time-dependent and damage behaviors of matrix and axonal fibers	21

Governing failure mechanisms of simplified three-way dendritic branch under compressive load	21
Mechanism and prediction of screw dislocation strengthening by interstitials in advanced high-strength steels: Application to Fe–C and Fe–N alloys	21
Failure analysis of unidirectional FRP with fiber clusters under transverse pure shear	21
Editorial Board	21
On the application of Physically-Guided Neural Networks with Internal Variables to Continuum Problems	20
Effect of microdamage on the failure of open-hole UD GFRP laminates: A combined experimental and numerical study	20
Spontaneous bi-stability of liquid crystalline solid beams and state transitions via snap-through buckling	20
Supershear cracks appear along weak interface in semi-regular lattices under pre-tension	20
Closed form solutions for the strain localization problem in a softening circular bar in pure torsion with the continuum damage and the embedded discontinuity models	20
Nonlocal model of electromechanical fields and effective properties of piezoelectric materials with rigid and electrically conductive inclusions	20
Elastic unidirectional cylindrically-symmetric-fiber composites with general radially-variable anisotropic coatings	19
Out-of-plane fracture in plane strain conditions: A novel criterion with analytical and experimental evaluation in thick PUR foam	19
Warren truss inspired hierarchical beams for three dimensional hierarchical truss lattice materials	19
A micromechanical rate-dependent friction-damage model for quasi-brittle materials under quasi-static compressive loading	19
A modified constitutive model for whole-life thermal-mechanical fatigue incorporating dynamic strain aging in 316LN stainless steel	19
An artificial neural network-based thermo-mechanically coupled model for elastocaloric cooling of shape memory alloys	18
Phase field modeling of thermal fatigue crack growth in elastoplastic solids and experimental verification	18
The influence of ambient temperature and X-band frequency on EMI shielding performance of graphene/silica nanocomposites	18
Editorial Board	18
4D local investigation of mechanical behavior of open-cell foams by enhanced morphological analysis and microstructure-adapted digital volume correlation for tribology applications	18
Electro-mechanical-carrier coupling model of single piezoelectric semiconductor fiber pull-out	18
Two competitive ignition mechanism for dynamic extrusion-shear loaded high-energy propellant	18
Planar metamaterial with sign-switching Poisson's ratio based on self-contact slits	18
Two-temperature thermodynamics and a viscoplasticity model for FCC metals with grain boundary effect	18
Crystallization-induced residual deformation evolution in thermoplastics during material extrusion and subsequent annealing	18
DLP printed 3D gyroid structure: Mechanical response at meso and macro scale	18
Shock compression of additively manufactured high solids loaded polymer composites with aligned porosity	18
Resisting room-temperature creep in titanium alloys by pre-compression	18
Multiple elastic or rigid line inclusions in a multilayered orthotropic solid	18
A constitutive model for Cemented-Sand-Gravel (CSG) materials based on strength characteristics	18
Rules to identify and track the evolution dynamics of {10	17
A combinatorial approach to the elastic response of electrospun mats: Architectural framework and single fiber properties	17
On the interaction of grain-scale and hydride-scale stresses in hydrogen enriched zirconium alloy nuclear cladding via combined discrete dislocation plasticity and crystal plasticity finite element mo	17
A semi-analytical approach to mode-I stress intensity factor and fracture energy of a circular crack in a poroviscoelastic medium	17
Constitutive modeling of damage-induced stress softening in electro-magneto-viscoelastic materials	17
Bridged structures in ultrathin 2D materials for high toughness.	16
Size-dependent parametrisation of active vibration control for periodic piezoelectric microplate coupled systems: A couple stress-based isogeometric approach	16
A statistical high-order reduced model for nonlinear random heterogeneous materials with three-scale micro-configurations	16
Delineating strain-rate hardening and inertial effects on dynamic hardness of materials	16
Micromechanical modeling of the nonlinear behavior of lightweight aggregate concrete — Failure under multiaxial loading conditions	16
Bridging the scales of mechanical failure in solids	16
Substantial curvature effects on compliant serpentine mechanics	16
Ductile rupture under cyclic loadings at high triaxiality: The influence of strain hardening and elasticity	16
Acoustic emission signal processing for the assessment of corrosion behaviour in additively manufactured AlSi10Mg	16
Multiscale plasticity in gradient polycrystalline based on discrete dislocation dynamics	16
Effects of size and texture on anisotropic elasto-plasticity in Cu–Nb nanolaminates by integrating semi-empirical and data-driven approaches	16
Correlation between the ratio between the tensile and shear yield strength on porosity evolution in isotropic ductile materials	15
Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals	15
Thermodynamically consistent Recurrent Neural Networks to predict non linear behaviors of dissipative materials subjected to non-proportional loading paths	15
Editorial Board	15
Compression of filled, open-cell, 3D-printed Kelvin lattices	15
Active compliant mechanisms for optimized actuation by LCE-based artificial muscles	15
A comparative study of void characteristics on the mechanical response of unidirectional composites	15
When invariants matter: The role of I1 and I2 in neural network models of incompressible hyperelasticity	15
Deep learning-assisted prediction of mean grain size of polycrystalline materials from ultrasonic wave response	15
Crystal-scale modelling of pore collapse in cyclotetramethylene tetranitramine (HMX) under different shock strengths	15
Atomistic insights into the effect of bacterial cellulose and water content on the mechanical properties of the bacterial cellulose/polyvinyl alcohol (BC/PVA) composite hydrogel	15
Local measurement on oedometric compression tests: Time and temperature ageing effects on a fluorosilicone	15
Shock loading of carbon nanotube bundle	14
Actuated three-dimensional shapes of discretely patterned orthogonal nematic bilayers	14
A piecewise recursive semi-analytical method for effective evaluation of heterogeneous aging viscoelastic materials	14
Constitutive modeling of diffusion-limited oxidation coupled with a large deformation theory for polymer degradation	14
Geometric effects on impact mitigation in architected auxetic metamaterials	14
Editorial Board	14
Scattering of mechanical waves from the perspective of open systems	14
The effect of magnetic field parameters on fibre orientation in high-performance fibre-reinforced concrete	14
Multi-scale description of hydro-mechanical coupling in swelling clays. Part II: Poroplasticity	14
Traction–separation law for bridged cracks at immiscible polymers interface	14
Buckling behavior and damage mechanism analysis of fiber-reinforced shape memory polymer composites	13
On estimating 3D crack density from crack traces on surfaces or cross-sections of a specimen – problem revisited	13
Gradient microstructure evolution of high-strength alloy steel induced by shot peening	13
Effective elastic modulus of 3D printed plastic 2D and 3D infill patterns	13
The role of accumulated plasticity on yield surface evolution in pearlitic steel	13
The influences of temperature on the macroscopic elastoplastic behaviors of heterogeneous materials	13
3D auxetic metamaterials with tunable multistable mechanical properties	13
Microscale model for intergranular and transgranular damage and fracture in polycrystalline ceramics	13
Contributing factors to preterm pre-labor rupture of the fetal membrane: Biomechanical analysis of the membrane under different physiological conditions	13
Mechanical properties of tetragraphene single-layer: A molecular dynamics study	13
Non-iterative stress projection method for anisotropic hardening	13
Failure induced by a dynamic anti-plane slip pulse in flexoelectric materials	13

Effects of thermal treatments on the fracture behaviour of a silica-filled NBR: A study on the recovery of the Mullins effect and on the stretch-induced cavity formation	13
Enhanced mechanical and thermal properties in 3D printed Al2O3 lattice/ epoxy interpenetrating phase composites	13
Mechanical modelling of viscoelastic hierarchical suture joints and their optimisation and auxeticity	13
Mechanical behaviour and constitutive modelling of an additively manufactured stereolithography polymer	13
Preserving non-negative porosity values in a bi-phase elasto-plastic material under Terzaghi’s effective stress principle	13
Editorial Board	13
Bicontinuous composite materials: general homogenization methods in linear elasticity	13
A novel metamaterial with instantaneously sign-switchable coefficient of thermal expansion and Poisson's ratio	12
New aspects of a single-crystal gradient plasticity model: Rate-dependency of size-dependent response	12
Band-structure calculation of SH-waves in 1D hypersonic nano-sized phononic crystals with deformable interfaces	12
Characterization and modeling of the damage mechanisms in ductile steel metal-matrix composites: Application to virtual forming	12
Unusual temperature dependent core properties of <110> superdislocation in Ni3Al by ab initio results-informed fully discrete Peierls-Nabarro model	12
Enhancing nonlinear viscoelastic modeling of elastomers through neural networks: A deep rheological element	12
Learning a potential formulation for rate-and-state friction	12
The role of crystal orientation in cracking performance of HCP magnesium single crystals	12
A molecular dynamic investigation of cyclic strengthening mechanism of Ni-based single crystal superalloy	12
Subcritical growth of a crack interacting with the stress field of mobile solutes in an elastic solid in the presence of image effects: A kinetic Monte Carlo study	12
Prediction of viscoelastic effective creep compliances in cracked cross-ply composite laminates	12
Modeling the thermo-responsive behaviors of polydomain and monodomain nematic liquid crystal elastomers	12
Predicting multiple fatigue properties of twinning-induced plasticity steels by black-box and white-box machine learning	12
New double surface constitutive model of intermittent plastic flow applied to near 0 K adiabatic shear bands	12
Topological boundary states in micropolar gyroelastic continua	12
A micromechanical model for the swelling effect on visco-super-elastic and damage self-healing behaviors of hydrogels reinforced by nanoparticles	12
Hierarchical relaxation governed by memory effect in azobenzene-based supramolecular photosensitive hydrogel	12
An analytical and experimental investigation into overall dissipation of flexural mode in a periodically damped beam	12
Inverse-designed growth-based cellular metamaterials	12
Corrigendum to “Representative volume element: Existence and extent in cracked heterogeneous medium” [Mech. Mater. 184 (2023) 104748]	12
On the dependence of orientation averaging mean field homogenization on planar fourth-order fiber orientation tensors	12
Deformation of nucleated cells driven by ultrasonic standing waves	12
Mechanical attributes and wave propagation characteristics of TPMS lattice structures	12
Design of partially covered bilayer thin film actuators	12
Temperature-dependent electrical breakdown model of solid dielectric materials based on the high-temperature fracture mechanics	12
Programmable deformation of liquid crystal elastomer plates subjected to concentrated light illumination	12
On the development of a constitutive model for steel subjected to fire and explosion	12
Modeling the thermo-oxidative aging effects on fatigue life of natural rubber using a continuum damage mechanics approach	12
A bounding surface viscoplastic damage model for time-dependent rock deformation	12
Investigating the interfacial behavior of van der Waals heterostructures with nano-inclusions: Molecular dynamics simulation and theoretical analysis	12
Deformation and delamination of dynamically bulging bilayered films	12
Fractional order strain and viscosity in the Moore–Gibson–Thompson thermoelastic diffusion model: A study of transient responses in one-dimensional half-space	12
Elasticity of bidisperse attractive particle systems	12
Influence of the cell size and wall thickness on the compressive behaviour of fused filament fabricated PLA gyroid structures	11
Dynamic effective properties of piezoelectric composites with inclusions in arbitrary orientations	11
A variational method for the simulation of hydrogen diffusion in metals	11
Tuning structural and mechanical anisotropy of PVA hydrogels	11
Embedding strain-rate sensitivities of multiple deformation mechanisms to predict the behavior of a precipitate-hardened WE43 alloy under a wide range of strain rates	11
Constitutive models for confined elastomeric layers: Effects of nonlinearity and compressibility	11
Criteria for mode shape tracking in Micropolar-Cosserat periodic panels	11
Editorial Board	11
Generalized thermoelasticity of microstructures: Lord-Shulman theory with modified strain gradient theory	11
Soil-expended seismic metamaterial with ultralow and wide bandgap	11
Probabilistic progressive damage modeling of hybrid composites	11
A yield function based on stress invariants and its extensions: Modeling and validation	11
Corrigendum to ‘A micro-mechanical model of reinforced polymer failure with length scale effects and predictive capabilities. Validation on carbon fiber reinforced high-crosslinked RTM6 epoxy resin’ [	11
Characterization of dynamic confinement response of potting materials at different strain rates and temperatures	11
Editorial Board	11
Viscous friction - induced ignition mechanism of high-energy propellants under dynamic compressive loading	11
DIC-based approach to predict post necking behavior for AA6061, AA7075 and their friction stir welded joints	11
Bicrystallography-informed Frenkel–Kontorova model for interlayer dislocations in strained 2D heterostructures	11
Analysis of blood flow–clot interaction using a fibrinogen concentration–dependent hyperelastic constitutive model	11
Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8	11
A method to design stone structures based on origami	11
Attention-enhanced deep learning for stress-strain response prediction and inverse design of random porous materials	10
Process-induced residual stress in non-crimp fabric composites: Experimental and numerical evaluation considering viscoelasticity	10
Kirigami beyond tension: Expanding Kirigami's versatility via shear actuation	10
Numerical modelling of the dynamic pull-out of steel fibers from cementitious materials	10
The interfacial behavior of an axisymmetric film bonded to a graded inhomogeneous substrate	10
Chirality in topologically interlocked material systems	10
An infill-based approach towards stiffer auxetic lattices: Design and study of enhanced in-plane elastic properties	10
Time–temperature correlations of amorphous thermoplastics at large strains based on molecular dynamics simulations	10
Interface temperature evolution and bonding characteristics analysis induced by microparticle impact	10
Editorial Board	10
The dual phase lag model for thermoelastic microbeams embedded in an elastic foundation incorporating fractional Kelvin–Voigt viscoelasticity	10
Mechanism of nanoscale helium bubbles influencing dynamic tensile response of polycrystalline copper	10
Molecular dynamic simulations of the martensitic transformation for the dual-phase structure and dislocation activities in Ti80 alloys	10
Editorial Board	10
Bifurcation and bistability in pneumatically actuated periodically porous elastomers	10
Achieving geometric accuracy in FFT-based micromechanical models using conformal grid	10
Equivalent Inclusion Method (EIM) for isotropic and anisotropic spatially oriented spheroidal inhomogeneities: A unified calculation module validated via comparisons to Finite Element (FE) simulations	10
The most severe imperfection governs the buckling strength of pressurized multi-defect hemispherical shells	10
Editorial Board	10
Accelerated intelligent prediction and analysis of mechanical properties of magnesium alloys based on scaled super learner machine-learning algorithms	10
Modeling plasticity-mediated void growth at the single crystal scale: A physics-informed machine learning approach	10
Relating stiffness changes in porous materials to the evolution of pore space	10
Seamless coupling of bond- and state-based peridynamic and finite element analyses	10
Finite deformation viscoelastic models based on internal variables related with strain or stress	10
An alternative shear lag model for composites with discrete interfaces	10
Coupling between elastic waves and magnetic spin waves in saturated ferromagnetoelastic plates	10
Dynamic impact tests and temperature rise induced damage constitutive model of ice-rich frozen sandy soil	10
Free vibration properties of beetle elytron plate: Composite material, stacked structure and boundary conditions	10
Thermo-mechanical experiments for deformation twinning in high-purity titanium	10
Modelling of hydrogen-assisted damage at the deforming single crystal crack-tip	10
A grain boundary region model to capture grain size and misorientation effects on elasto-plastic response of polycrystals	10
Statistics of maximum stress for elastic wave propagation in a random porous solid	10
Effect of shell thickness on mechanical behavior of Al/Ti core-shell nanowires during three-point bending and unloading	10