Journal of Adhesion Science and Technology

Article	Citations
Interfacial microstructure evolution and mechanical properties of TIG welding joints of AISI 304/Q235B rolled composite plates	144
Effect of silane surface modification on the bonding properties of the hot-pressing molded polycarbonate/aluminum alloy hybrid	131
Numerical and experimental study on effect of induction heating parameters on the coating of Zn layer on mild steel	72
Strategy for developing aluminum alloy-based solid structure with homogeneous properties in the overlapping direction using wire arc additive manufacturing	68
Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining	57
Experimental investigation and trinomial friction modeling of frictional interactions at concrete-rubber interfaces	48
A comprehensive review of the recent developments in friction stir welding of metals, alloys, and polymers: a review of process parameters and properties	48
Microstructural evolution and globularization in additively manufactured Ti-6Al-4V via cyclic heat treatment	44
Correction	43
Advances in nanocomposite coatings for corrosion protection of ferrous and aluminum alloys: mechanism, performance, and future perspectives	36
An experimental study on the mechanical performance of BFRP-Al adhesive joints subjected to salt solutions at elevated temperature	36
Characterization of the surface properties and adhesion behavior of electroplated PC/ABS using nano-indentation and scratch tests	36
The effect of chemical surface modification of banana and pineapple fibers on the interfacial adhesion with unsaturated polyester resin composites	36
Elucidating the role of catechol-lysine synergy in DOPA rich mussel adhesive protein extracted from Perna viridis with pH dependent adhesion mechanism	35
Surface treatment of PVC by corona discharged atmospheric air plasma for adhesive joining with AA 6061 aluminium alloy	35
Initiator-free melt grafting of maleic anhydride and styrene onto EPDM for transparent adhesive coatings in paper conservation	34
Anti-aging mechanism of polyurethane/graphene oxide composite modified asphalt: insights from experiments and molecular simulation	33
Effect of friction stir processing on wire arc additively manufactured ER70S-6/SS308L bimetallic FGM	32
A review on silver-filled epoxy as die attach adhesive in LED package: thermomechanical characterisation methods and material models	31
Effect of nanoparticles adhesion and multipass friction stir processing on metallurgical properties of AZ91D magnesium alloy	29
Optimization of FSW input parameters for dissimilar butt-welded joints of Al6061-AZ31 alloys by GRA	29
New strategy for corrosion protection of Mg alloys under acidic conditions: organic–inorganic composite films	28
DPF-produced TiN coatings on NiTi: biological and mechanical properties	28
Poly( N -vinyl carbazole)-TiO 2 composite coating for protection of steel	28
Alternative surface treatments strategies for bonding to CAD/CAM resin-matrix ceramics	27

Modified Achira (Canna edulis) starch-based adhesives: effect of acid hydrolysis and urea derivatization on physicochemical properties	25
Effect of curing mode on polymerization kinetics, mechanical properties, and dentin adhesion of self-adhesive and conventional resin cements	25
A new approach based on a concurrent cooling method during GTAW and DC-LSND welding to mitigate residual stresses in Al 6061-T6	24
Characterization of chemically treated luffa aegyptiaca fiber-reinforced epoxy composites with varying bio-filler	23
Development of corrosion resistance of reinforcement steel bars with nano-silver coatings	23
Corrosion protection on texturized steel moulds for polymeric products by sol–gel anti-adherent coatings	21
Influence of post-etching phosphoric acid cleaning on resin bond strength to glass-ceramics: a systematic review of in vitro studies	20
Enhancing mechanical properties of GFRP–aluminum joints through Z pinning: a low velocity shear impact study	20
XGBoost and genetic programming methods for analysing the vitreous transition of the epoxy adhesive	20
Parametric investigation into the mechanical characteristics of dissimilar steel joints produced using SMHH-based joining technology	20
Improving biocompatibility and corrosion resistance of titanium alloy implants with bredigite-graphene oxide nanocomposite coatings	20
Comparative study of microstructural evolution and mechanical properties in friction stir processed, reinforced friction stir processed, and heat-treated reinforced friction stir processed Al composit	19
Multi-objective optimization of input and output process parameters of dissimilar CMT welded joints of AA6082 and AA7075	18
10-MDP-based dentin bonding systems: why is chlorhexidine not worth to be used adjunctively?	18
Development and characterization of surface-treated Ailanthus excelsa and waste polyethylene terephthalate powder reinforced polyester composites	18
Investigation of thin layer zinc coating on aluminium 6061 substrate using friction stir additive manufacturing process for material development	18
Bioinspired gallic acid derivatives for enhanced waterborne acrylic adhesives	17
Influence of (1D/2D) hybrid nanomaterials on the mechanical and durability properties of pozzolana portland cementitious mortar	17
Synthesis of thermosetting phenolic resin and its montmorillonite/silica nanocomposites under alkali-free conditions	16
Microstructural and mechanical investigation of dissimilar U-groove weld of IN 718/ASS 304L employing ERNiCr-3 filler	16
Enhancing epoxy coatings with spherical ZnO nanoparticles for improved hydrophobicity and corrosion resistance	15
Effect of zinc nanoparticles on the mechanical properties and stability of the resin-dentin bonded interface	15
A generic machine learning framework to predict weld strength: digitalization of welding technology	15
Synthesis and characterization of novel silazane-modified amine curing agents for enhanced thermo-mechanical properties in epoxy resins	15
Interface needle structure induced high-performance aluminum alloy/PPS hybrids	15
Effect of natural fiber type and angle of interface on the interfacial bond characteristics of ultra-high toughness cementitious composites	15
Developing double hook morphology in Al–steel FSSW via controlled pin penetration	15
Effect of nanoparticle infiltration into the opaque agent of pink composite resin on its bond strength with base metals	15
Structural behaviour of adhesive bonds in 3D printed adherends	14
Wettability of metals: a critical review	14
Effect of post-heat treatment on microstructure and mechanical properties of wire arc additively manufactured Inconel 718: comparison with L-PBF	14
Synergic enhancement of ductility and toughness in friction stir additively fabricated AA6061-T6 build	14
Enhancing bond strength between adhesive resin cement and high-translucent zirconia through silica nanostructure infiltration: a comparative study of particle size and application method	14
Characterization of cellulose acetate/low density polyethylene fibre reinforced composite	14
Effect of groove angle on creep rupture and damage behaviour of P91 steel weld joint	14
Experimental investigation of erosion behavior of WC-10Ni5Cr coatings on 35CrMo steel under solid particle impact at oblique and normal angles	14
Preparation and early strength properties of modified carbon black/metakaolin composite cement sealing material	13
Experimental study on the impact of hybrid GFRP composites with graphene oxide and silicon carbide fillers on mechanical and wear properties	13
A numerical study on stress mitigation in through-thickness tailored bi-adhesive single-lap joints	13
Gecko-inspired dry adhesives for heritage conservation – tackling the surface roughness with empirical testing and finite element modelling	12
Residual regression on laser welding of CFRP-metal hybrid structures	12
Study on the performance and synergistic mechanism of cement mortar reinforced with combined superabsorbent polymers and basalt fibers admixture	12
Coating fracture toughness and interfacial bonding performance of graphene oxide zinc-rich coating/steel substrate system	12
Evaluation of epoxy and polyester resin composites with alkali-treated waste bagasse fibers for terrace coating applications	12
A systematic review of AI-assisted residual stress control in WAAM: real-time defect management and industrial implementation	12
Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber	12
Micromechanical and microstructure evolution of leaded (SnPb) and lead-free (SAC305 and SnCu) mixed solder joints during isothermal aging	12
Experimental and theoretical analysis of strain hardening behavior of friction-stir-welded Al-4.2Zn-3.1Mg aluminium alloy	12
Effects of welding directions on microstructure and mechanical properties of repair welds on the thermite welded rail surface	12
Research on an innovative nettle-based filler in the field of hybrid adhesive joints	12

Parametric analysis of processing variables for enhanced adhesion in metal-polymer composites fabricated by fused deposition modeling	12
Image analysis for dispersion of fibres and strength assessment of hybrid fiber reinforced SCC using artificial intelligence	11
Study on the bond properties between basalt fiber-reinforced spontaneous combustion coal gangue concrete and BFRP bars	11
A comprehensive review on fiber surface modifications and their impact on concrete properties	11
Effect of presence of SWCNT and Fullerene nano particles in the adhesive of CFRP single lap joint on the lap shear strength subjected to hygrothermal conditions	11
Study on the mechanism of 6061-T6 Al and ZK61M Mg on FSLW joints: influence of overlapping order	11
An in-situ experimental and simulation study on the electromigration behavior of SAC305 solder joints	11
The tailoring of interfacial adhesion and its effects on material properties for carbon-fiber reinforced polymeric composites	11
Effect of intermetallic compound evolution on tensile damage mechanical properties of Cu/Sn micro-solder joints under multi-field coupling	11
Synthetic method to improve adhesion of sodium carboxymethyl cellulose solutions and its application to reconstituted tobacco for improved processability	11
Experimental study on the macroscopic and microscopic mechanical properties of simulated cemented granular materials	11
The effects of experimental etchant with calcium phosphate ion clusters on the nanoleakage at dentin–resin hybrid layer	11
Bond–slip behavior characterization between ultra-high performance glass sand concrete and high-strength HRB 600 rebar based on acoustic emission monitoring	11
Microstructure and properties of multi-layer laser cladding Cu-10Pb-10Sn anti-friction coating	11
Parameter optimization of particle-reinforced adhesive bonded joints based on the response surface method	10
N-hydroxypyrazine-2-carboxamide as a new and green corrosion inhibitor for mild steel in acidic medium: experimental, surface morphological and theoretical approach	10
Study on the bond properties between BFRP bars and hybrid fibers reinforced recycled concrete under freeze-thaw cycles	10
The influence of artificial weathering on the adhesion of some varnishes applied to thermally treated iroko and ash woods	10
Experimental and cohesive zone modelling study on composite joining by co-curing and adhesive bonding for sheet moulding compound or carbon-fibre prepreg laminates	10
Effect of different fluoride pretreatments on adhesion to enamel and dentin using a universal adhesive	10
Adhesion properties improvement of waste glass aggregate-asphalt interface	10
A study of parametric optimization, microstructure and wear behavior of an AA7075–SiC composite coating developed by friction surfacing	10
Effect of adhesive deficiencies in single lap joints made of single and dual adhesives between dissimilar substrates	10
Progressive effect of dual-hybridization in friction stir welding by ultrasonic vibration and resistive heating for joining dissimilar material Al6063 aluminium alloy and C26000 copper alloy	10
Retraction	10
Effect of thiol compound on the dentin bond strength when using experimental one-bottle self-etch adhesive system	10
Study on the adaptability of aluminum alloy and CFRP adhesive joints after extreme environments	9
Parametric analysis and prediction of dry adhesive wear characteristics of waste glass dust filled hemp-epoxy composites	9
Creep cavities and carbide evolution in interrupted creep conditions along P91 steel of dissimilar weld joint	9
Waste to wealth: development of cladding flux from steel slag for submerged arc welding	9
Ultrasonic welding of Cork Wood/PLA composites: effect of welding factors on lap shear strength performance	9
Optimizing microstructures and properties of PEO coatings on sandblasted pure titanium: the influence of jet angle	9
Corrosion resistance studies of copper and magnesium-doped fluorohydroxyapatite coatings on titanium biomaterial	9
Effect of material positioning on Si-rich TIG welded joints of AA6082 and AA8011 by friction stir processing	9
Bond durability of a silane-containing self-adhesive and conventional resin cements to CAD/CAM glass and hybrid ceramics	9
Effect of welding speed and wire feed rate on arc characteristics, weld bead and microstructure in standard and pulsed gas metal arc welding	9
Adhesion and colorimetric analysis of acrylate resin-based screen-printed inks on anodized aluminium substrate	9
Improving bonding performance of PCM-concrete interface under elevated temperatures by using different adhesives	9
Low-temperature direct diffusion bonding of Zr702 alloys via electric current assistance	9
Fracture behavior and strength enhancement of 3D-printed stepped-lap bonded joints using geometrically graded interfaces: experimental validation and damage modelling	8
Enhanced anticorrosion performance of epoxy primer coating on zinc in 3.5% NaCl by micro and nano particulates of biopolymers	8
Synthesis and properties of crosslinked waterborne polyurethane/acrylate copolymer latexes using AIBN initiator based on a solvent-/emulsifier-free method	8
Influence of printing orientation on power-law hardening and ductile damage parameters for 3D-printed SS316L steel: experimental and FEA approach	8
Exploring the influence of pin geometry on metallurgical and mechanical characteristics of dissimilar aluminum TIG welds via friction stir processing	8
Influence of thread pitch on material flow and mechanical properties of stationary shoulder friction stir lap welded dissimilar joint	8
Fish processing discards extract as an eco-friendly corrosion inhibitor for carbon steel in hydrochloric acid	8
A critical review of material flow investigation in friction stir welding using novel techniques	8
Development and performance evaluation of low-density cork/phenolic composites for high-temperature aerospace use	8
Surface modification strategies of 304 austenitic stainless steel plate with different micromorphology and composition for improved mechanical interlocking and chemical bonding in metal–epoxy joints	8
Dismantling of aluminum/CFRP bonded assemblies with dismantlable adhesives containing expanded graphite	8
Development of lignin-reinforced polyurethane adhesive for glued laminated timber	8
Quantum chemical and molecular dynamics simulation approach to investigate adsorption behaviour of organic azo dyes on TiO 2 and ZnO surfaces	8
Glucose-stabilized polyvinyl acetate homopolymer-based wood adhesive: synthesis and characterization	8
High-temperature and drying shrinkage behavior of mortars containing colemanite and different fiber types with air-entraining admixture	8
Effect of irrigation systems on the bond strength of calcium-silicate-based cement used as pulp barrier in regenerative endodontic treatment	8
Development and formulation of a novel plasticizer-free polyvinyl acetate-based wood adhesive	8
Emerging progress of chemical-based coating for the corrosion protection of magnesium alloys: a review	8
The effect on static tensile loading performance of varying assembly parameters of carbon-fiber-reinforced polymer hybrid bonded/bolted joints: preload, curing conditions, and adhesive thickness contr	8
Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature	8
Review of protective coatings for corrosion mitigation in chemical machinery: performance and mechanical aspects	8
Study on parameter optimization of laser cladding Fe60 based on GA-BP neural network	8
Evaluating structural strength and vibrational characteristics of silicon carbide incorporated adhesively bonded single lap joints	8
New π spring for piezostack-driven jetting dispenser	8
A new experimental methodology for investigating the impact of subsequent welding passes on the properties of the austenitic stainless clad steel plates welded joint: part I – a substrate case study	7
Evaluations of surface morphology in EDMed MoSi 2 -SiC intermetallic ceramic composite surfaces	7
Atmospheric corona-plasma activation of Garolite composite for enhanced adhesive bonding with aluminum	7
The effects of Nb on the microstructure and performance of laser-cladded Fe 50-x Mn 30 Co 10 Cr	7
Mechanical characterization of short Curauá/glass fiber-reinforced interlaminar hybrid composite adhesive joints	7
Quantitative assessment method of thermal cycle accumulation mechanism during the pulsed laser single-channel multilayer cladding process	7
Investigation of the suitability of adhesive tapes for sealing building structures of various surfaces	7
Correction	7
Influence of processing methods on the dispersion of laponite and the bulk properties of laponite filled latex nanocomposite	7
Understanding the corrosion of pipe steel due to the adhesion of sulfate reducing bacteria film combined with the deposit layer	7
Polyvinyl acetate–glycidyl methacrylate co-polymer emulsion-based heat-resistant wood adhesive	7
Thermal fatigue life prediction of Ag-2.5Sn solder joint in flip chip	7
Correlation between adhesive film characteristics and the bonding performance	7
Investigation of the economic and sustainability aspects of cathodic protection method for corrosion prevention in marine structures	7
Optimizing epoxy asphalt tack coat formulations for improved adhesion and working performance of ultrathin wearing course	7
Influence of hygrothermal aging on the static tensile properties and failure mechanisms of bolted, bonded, and hybrid basalt fiber-reinforced plastic–aluminum alloy joints	6
Ultrasonıc-assısted sustaınable water-based composıte coatıngs ıncorporatıng zınc borate, gomalac, and fumed sılıca: box-behnken optımızatıon of surface tension	6

The effect of different parameters on the wear, surface properties, and shear bond strength of monolithic zirconia CAD/CAM restorative materials	6
Is there a correlation between physical properties and film thickness of dual- and photo-polymerized resin cements and CAD/CAM-dentin micro-tensile bond strength?	6
Enhanced tribological performance of electroless NiP hybrid composite coatings: the role of MoS 2 -Gr solid lubricants at room and elevated temperatures	6
Implications of nanomaterials reinforcement along with sub-zero temperature cooling on microstructure and mechanical properties of friction stir processed Al7075 alloy	6
An experimental investigation on mechanical characteristics and wear behaviour of TIG welded dissimilar aluminum alloys	6
Effect of airborne particle abrasion and primer application on the surface wettability and bond strength of resin cements to translucent zirconia	6
Present status and prospects of nano-silver particles in the electronic field: a review	6
Acoustic emission monitoring and damage evaluation of bi-adhesive joint patch-repaired composites	6
Viscoelastic model to evaluate the shear and peel stresses in the two-adhesive bonded lap joints	6
Simplified surface wettability determination defined by new interfacial interaction compatibility expressions for composites	6
Enhancing flame retardancy and mechanical performance of epoxy/carbon/ramie hybrid composites: influence of ammonium polyphosphate and artificial neural network predictions	6
High anticorrosion performance of polyvinyl butyral/carbonized polyaniline/modified titanium dioxide composite coating	6
Pythagorean fuzzy logic-based evaluation of factors affecting the bonding strength of wood and wood-based materials	6
Contrasting mechanical and electromagnetic shielding properties of graphene and MXene coatings on PEEK composites: results for advanced aerospace and electronic applications	6
Effect of oscillating arc motion in pulsed arc GMAW-WAAM: a multi-aspect study of additively manufactured AM70 high-strength low-alloy steel	6
Let’s celebrate 40 years of JAST … and some additional thoughts	6
Enhancing hardness in SMAW welded joints with low-frequency vibration assistance: an experimental and analytical study	6
Cold-sprayed AA2024/YSZ metal matrix composite coatings on AZ31B magnesium alloy: microstructure, interfacial adhesion, and tribological performance	6
Durability of adhesive bonded joints for exterior façade ceramic tile fixation	6
Effect of water aging on the shear bond strength of different self-adhesive restorative materials to dentin	6
Influence of polyurethane coating thickness on sulfate attack resistance of cement mortars and corrosion resistance prediction modeling	6
Progress in nanocomposites based on starch nanocrystals graft polycaprolactone and modified clay: synthesis, characterization, thermal and antibacterial properties	6
Multiaxial fatigue damage parameters and life prediction for adhesively bonded butt-joint based on the stress-based approach	6
Moisture damage resistance of pyro-oil modified bitumen with hydrated lime using surface free energy approach	6
Study on the performance of laser cladding Ni-based WC60 composite coatings	6
Mechanical behavior and failure mechanisms of α-MnO 2 nanorods/epoxy adhesives in structural bonding of CFRP composites	6
Microstructure and properties of TiB2/Cu composite coating with multi-layer structure prepared by electrodeposition	6
Electric-controlled adsorption and surface energy of cyclodextrins	6
Investigation of corrosion resistance and interfacial bonding properties of silver/silicone zinc-rich coating/substrate system in marine environment	5
The effect of Sn interlayer on weld structure, intermetallic compounds, and joint properties of Al/Mg friction stir welding with ultrasonic assistance	5
On the friction stir welding of alloy AA2014 under n-MQL cooling condition	5
Extract of photinia leaves as an effective corrosion inhibitor of carbon steel in 1 M HCl solution	5
Influence of In-situ-grown nano-SiO 2 /silane coupling agent on the flexural performance of basalt fiber-reinforced cementitious composites	5
Comparative analysis of shear load on single side and double side friction stir welded AA2014 joints	5
Foreword to the Special Issue	5
Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate	5
Development of dissimilar AA2014 and AA2024 based composite with nano-Si 3 N 4 reinforcement by friction stir process technique	5
Preparation of multi band photothermal responsive bio-based superhydrophobic self-healing poly(siloxane-urethane) coating	5
Silica-reinforced blend nanocomposites for enhanced corrosion resistance	5
From microstructure to hardness: influence of stacking fault energy on dislocation behavior in friction stir welded copper alloys	5
Preparation, characterization, and compatibilization of novel rubber nanocomposites for mechanical applications: relationship between electrical properties, morphology, and rheology	5
Optimization of processing variables of friction stir welded dissimilar composite joints of AA6061 and AA7075 using response surface methodology	5
Adhesion of veneering composite to metal-free CAD/CAM materials: effect of surface conditioning and adhesive resin type	5
Multiscale mechanistic analysis and graded regeneration strategy for aging degradation of high-content rubber-modified asphalt	5
The influence of wood surface treatments with different biomolecules on dry and wet strength of linear friction welded joints	5
Enhancing GFRP composites with bamboo fiber and TiO 2 : a study on mechanical and tribological properties	5
Micro-shear bond strength of repaired additively manufactured resin composites after artificial aging: effect of surface treatment and universal adhesives	5
Effect of PWHT on metallurgical and mechanical characterization of dissimilar welded joint of P91 and P92 steels	5
Special issue on ‘Recent advances in corrosion protection of metallic materials’	5
The failure law of the cement plug-casing interface for direct plugging in the casing of old wells for salt cavern gas storage	5
Prediction of formability and effects of process parameters on the adhesively bonded composite metallic sheets	5
Numerical analysis of stress distribution in the pressurized composite pipe buried in the soil	5
Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel	5
MXene epoxy nanocomposites for enhanced adhesive bonding: characterization and performance evaluation in single-lap joints at elevated temperatures	5
Evaluation of the tribological and anticorrosive properties of triazine derivatives in emulsion	5
Influence of process parameters on the welding temperature of heat-treated Scots pine and the composition of welded strip under optimum parameters	5
Microwave joining of glass fiber-reinforced nylon-6 composites	5
Real-time monitoring of residual strength in corroding steel reinforcement using ultrasonic-guided waves and multi-physics modelling	5
Tribological behavior of epoxy/nano-clay nanocomposites used as a floor coating	5
Strengthening the HAZ of an MIG welded joint of 6082-T6 aluminum alloy via mechanical-thermal hybrid aging treatment	5
Improvement of metallurgical and wear properties of the different substrate by high-velocity oxygen fuel (HVOF) coating: a critical review	5
The impact of altering the molar ratio on formaldehyde content and the physical and mechanical properties of MDF panels	4
Non-standard adhesives for wood-based composites: powder adhesives and bicomponent fibers	4
Ultrasonic welding of fiber reinforced polymer composites: a review	4
Experimental investigation on microstructure and properties of Al alloy-PEEK joint with different surface structure obtained by hot-pressing	4
Manufacture of the hetero-structure bonding joint between carbon fibre-reinforced plastics and aluminium alloy by using hot pressing one-time forming process	4
Adhesive contact between a rigid toroidal indenter and an elastic half-space	4
Mechanical characterization of PEEK-CF/PEEK sandwich structures prepared via a combination of fused filament fabrication and epoxy post-bonding	4
Quantitative assessment of surface degradation in cycloolefin polymer films subjected to vacuum ultraviolet irradiation and oxygen plasma treatment using a micro slurry-jet erosion test	4
Investigation of capillary forces and capillary bridges between an end-adjusted three-finger microgripper with hydrophobic side surface and a plate	4
Hot-pressing treatment to improve the shear strength of refill friction stir spot-welded 1060 Al–carbon fiber–reinforced plastic joint	4
A rapid two-step process to prepare a high-throughput, efficient, reusable superhydrophobic–superoleophilic stainless steel mesh for oil/water separation	4
Model for an elastic-plastic spherical contact with the DMT adhesion	4
Optimal preparation and characterization of self-curing concrete containing internal superabsorbent polymer and external waterborne epoxy coating	4
Corrosion inhibition mechanism and extraction technology of plant corrosion inhibitors: a review	4
Application of titanium dioxide nanoparticles for the design of oil well cement slurry – a study based on compressive strength, setting time and rheology	4
Polypropylene fabric of durable hydrophilic character using plasma-mediated surface coating with keratin	4
Microstructural and mechanical properties analysis of SS 316L structure fabricated using CMT-wire arc additive manufacturing	4
Tribological behavior of styrene butadiene rubber conveyor belts: effects of applied load and rotational speed	4
Investigation of mechanical properties and microstructure characterisation of MMA-MIG-TIG-SAW welded EN8 steel joints via shot blasting method	4
Combined effects of loading rate, adherend stiffness, and surface roughness on the fracture of epoxy adhesive joints	4
Interconnect Reliability in Advanced Memory Device Packaging	4
Data-driven erosion-corrosion mitigation of 2205 duplex stainless steel	4
An investigation on metallurgical features and joint characteristics of ultrasonic spot welded Al-Ni sheets	4
Study on dynamic mechanical properties and damage characteristics of wollastonite fiber reinforced oil well cement paste	4
Evaluation of mode II fracture toughness under high loading rate conditions for composite bonded joints	4
Enhancing concrete performance using protective coating fabricated by recycled waste material	4
Enhancing adhesive interlayer performance with waste tire rubber and amorphous poly alpha olefin compound modified asphalt	4
Preparation and lubrication properties of graphene oxide/polyethylene glycol/polyvinyl alcohol composite film	4
Exploring the potential of recycled PAN-type fibers as reinforcement in cement-based composites	4
Analysis of the anisotropic mechanical properties of structural adhesive joints with curing-induced pre-deformations	4
Impact of water diffusion on electrical properties of epoxy nanocomposites	4
Study on process, microstructure and mechanical properties of 6061/AZ31 dissimilar metal joining with direct contact reaction brazing	4
Study on the mechanism and correlation of double-pit pitting in ductile iron IN625 laser cladding layer	4
Acoustic emission study on damage mechanism of composite materials repaired with bi-adhesive and damage classification model	4