Applied Surface Science

Papers
(The median citation count of Applied Surface Science is 8. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Surface chemistry of supported Ru nanoparticles investigated during CO2 hydrogenation by NAP-XPS555
Corrosion behaviour of titanium anodised in DES solvents: electrochemical study combined with ellipsometric investigations353
Atomic Ru-embedded three-dimensional ion-conductive tunnel networks in Ta/Ru co-doped Nb2O5 nanosheets enabled by multifunctional graphene quantum dots for ultrahigh-energy-density supercapacitors253
Skew trapezoidal bipyramidal distortion in MoS6 unit stabilizing distorted phases of 1T-MoS2 single layer233
Chromatographic propane-propylene separation by different zeolites obtained from rice husk ashes226
Assessing the role of surface carbon on the surface stability and reactivity of β-Mo2C catalysts184
A functionalization approach of decorative poplar veneer accomplished via reactive dyeing followed by in-situ synthesis of ZnO-Ag nanoparticles175
Fluoride-incorporated apatite coating on resin-based composite via laser-assisted rapid pseudo-biomineralization173
Study on the multi-zone direct current pyrophosphate electrodeposition of black film with high light absorptivity156
Spectroscopic analysis of color origins in titanium-based thin films deposited by cathodic arc deposition153
Editorial Board144
Corrigendum to “Mixed metal oxide: A new class of catalyst for methanol activation” [Appl. Surf. Sci. 534 (2020) 147449]143
Covalent organic framework derived Mo2C-MoNi4 chainmail catalysts for hydrogen evolution142
Strain and orientation modulated optoelectronic properties of La-doped SrSnO3 epitaxial films141
Rapid and reliable metallurgical cladding of Sn-0.7Cu solder onto ADC12 Al alloy driven by ultrasonic-electric coupled field136
Hole-injection barrier across the intermolecular interaction mediated interfacial DNTT layer133
Flexible self-supporting metal-free N-doped graphene membrane as an electrocatalyst for oxygen evolution reaction132
Fluoride-assisted highly-active tungsten oxide with modulating exposed facets and defect sites for efficient ppb-level acetone detection131
Nepenthes-inspired hierarchical ZnIn2S4/Ru nanotubes with chemical bond-mediated interface enable efficient photocatalytic benzyl alcohol oxidation130
In2SX (X = O, Se, Te) as highly sensitive sensors for H2S gas detection129
Adsorption and modification behavior of single atoms on the surface of single vacancy graphene: Machine learning accelerated first principle computations129
Surface functionalization of 4H-SiC with biomimetic structures via two-step femtosecond laser processing for superhydrophobicity129
Synthesis and in-depth interfacial characterization of 2D electron gases formed in Si3N4/Al//KTaO3 heterostructures129
Computational insights into the adsorption of lung cancer biomarkers on graphene-based materials and interfacial phenomena125
Multilevel phase transition behavior of In2Se3-doped with Sb materials based on flexible polyimide substrate124
Ultrafast real-time tracing of surface electric field generated via hot electron transport in polar semiconductors124
Editorial Board121
Mechanistic studies on defective hBN-supported metal-nonmetal synergistic catalysis for urea electrosynthesis120
Coordinated regulation of corrosion and wear properties of Zr alloy by constructing surface gradient microstructure using fiber laser119
Blend hole-transport layer with gradient component distribution for high-performance green QD-LEDs117
Comparative study of plasma surface modification of temperature-sensitive ionoplast by two atmospheric N2 APPJ117
Zr-doping and NiFe(OH)x modification for co-promoting the photoelectrochemical water decomposition performance of Fe2O3 photoanode116
Corrigendum to “Electrochemical study on the effect of catalytic current collecting layer on thin film La0.6Sr0.4Co0.8Fe0.2O3−δ (LSCF) cathode” [Appl. Surf. Sci. 509 (2020) 145224]112
High performance broadband photodetector in two-dimensional metal dichalcogenides mediated by topologically protected surface state111
Editorial Board108
Corrigendum to “Spatially inhomogeneous operation of phase-change memory” [Appl. Surf. Sci. 589 (2022) 153026]108
Improved surface passivation of lead sulfide quantum dots using less sterically crowded alkylammonium iodides108
Microwave treatment effect on the enhanced basicity of porous clay heterostructured composites derived from Laponite107
Assessing factors that determine adatom migration and clustering on a thin film oxide; Pt1 and Rh1 on the “29” CuxO/Cu(1 1 1) surface107
Elevating performance of AlOxFy anti-reflection coating via controllable HF vapor fluorination106
Self-assembled epitaxial BiFeO3 nanostructures as a tailored platform for vertically aligned nanocomposites development106
Femtosecond laser nano-structuring for surface plasmon resonance-based detection of uranium105
Functionalization of a chemically treated Ti6Al4V-ELI alloy with nisin for antibacterial purposes104
Uracil derivative-assisted universal synthesis of defective 2-dimensional porous flaky carbon nitride for efficient photocatalytic CO2 reduction103
Enhanced resistive switching of silver copper iodide thin films prepared by interfacial phase formation102
UV laser generated micro structured black surface on commercial TiO2-containing glass101
Single-atom Au atomically trapped in WO3− catalyst for selective demethoxylation of lignin-derived guaiacols101
Editorial Board101
Editorial Board98
Editorial Board98
Low temperature growth of semi-polar InN (101<97
Correlation between the structural morphology and device characteristics of quantum dot based emission layer blended with small molecular hole transport material96
Study of Fe-C phase formulations through Fe self-diffusion during thin film growth96
Combinatorial aerosol deposition of bismuth–antimony thermoelectric coatings with tunable composition95
Effects of fs pulsed laser ablation on synthetic zeolite targets95
NiCo2O4 crystal plane regulation applied to electrochemical non-enzymatic H2O2 sensors91
First-principles study of the electronic structure and mechanical properties of TiN||SrTiO3 interfaces91
Conformable thin film organic electrochemical transistor array featuring tissue-like softness and ultralow biofouling91
Metastable phase formation in superlattice-like Sb-SbSe2 enables low-power operation and suppressed resistance drift91
Computational screening of 2D ternary penta-materials with auxetic properties and efficient photocatalytic CO2 reduction91
Physical properties of crystalline NaNbO3 thin film grown on Sr2Nb3O10 nanosheets at low temperatures for piezoelectric energy harvesters90
Efficient dioctyl phthalate hydrogenation over halloysite nanotube-loaded nickel-based catalyst: Surface and interface engineering90
Insight into profiled CNT/polymer interphase: A molecular dynamic simulation study of load transfer and shock response90
Photothermal-boosted S-scheme heterojunction of α-Fe2O3@NiOx for high-selective reduction of CO2 to CO89
3D-printed plasma-treated super-amphiphilic microgroove surface for outperformance of liquid vertical transportation87
Reactive molecular dynamics simulations of lysozyme desorption under Ar cluster impact87
Effect of passivation behavior of SAC305 alloy on the structure and defects of surface oxide film86
Modulation of capacitive response for prussian blue analogue-based NiFeS2@polydopamine@NiCo2S4 core-shell composite electrodes of capacitors by a surface modification86
Highly stable quantum dot light-emitting diodes with improved interface contacting via violet irradiation86
Frustrated Lewis pairs engineering on CeO2 to boost BHMF oxidation activity of AuPd for efficient production of FDCA86
A bowl-shaped structure-controllable hydrothermal carbon experiment design combined with DFT simulation: Efficient adsorption of Cd and Pb in coal gangue accumulation areas86
Atomistic study of shearing mechanism of nano-Ag joints and processing parameter optimization84
Simulation of chemical reactions with methanol and oxalic acid on 4H-SiC surfaces before and after nanoabrasion84
Three-dimensional ordered macroporous design of heterogeneous nickel-iron phosphide as bifunctional electrocatalyst for enhanced overall water splitting84
Insight into Mn enhanced short-chain olefins selectivity in CO2 hydrogenation over Na-CuFeO2 catalyst84
Understanding the promotion effect of Pt in the reaction system of water gas shift reaction catalyzed by Pt/α-MoC from theoretical perspectives83
High-efficiency (over 33 %) indoor organic photovoltaics with band-aligned and defect-suppressed interlayers83
Strain-driven charge localization in lightly hole-doped manganite epitaxial films83
One-step rapid preparation of superhydrophobic peek with mechanical, and chemical stability83
A well-designed fencelike Co3O4@MoO3 derived from Co foam for enhanced electrocatalytic HER83
The enhanced peroxymonosulfate activation ability and mechanism on low-coordinated Fe-N3 single sites for organic pollutant degradation in wastewater82
Effective design of MnO2 nanoparticles embedded in laser-induced graphene as shape-controllable electrodes for flexible planar microsupercapacitors82
Sterculia lychnophora seed-derived porous carbon@CoFe2O4 composites with efficient microwave absorption performance82
Composite nanofilms of graphene and nickel: Fabrication, cw linear and nonlinear optical properties81
CO2-induced in-situ surface reconfiguration of strontium cobaltite-based perovskite for accelerated oxygen reduction reaction81
ZIF-derived PtCu/N-DC dodecahedrons: Synergistic enhancement mechanism of methanol oxidation activity and poisoning resistance under low platinum loading81
Growth of singly orientated MoSe2 monolayer on Al2O3(11280
Photocatalytic reaction pathways and mechanisms investigation for effective organic pollution degradation via in-situ construction of BiOCl/UiO66-NH2 heterostructure80
Improvement of interfacial electron extraction efficiency by suppressing Auger recombination in an indium-doped mixed cationic perovskite heterostructure80
Evolution of copper step beams during graphene growth by CVD method80
Smooth surface and mechanically Durable integrated flexible transparent electrode based on 2D Semi-Embedded ultrafine Polyimide-Silver composite nanofiber network79
Crystalline grain engineered CsPbIBr2 films for indoor photovoltaics79
Interfacial structures and reactivities of CeO2/Cu(1 1 1) catalyst with strong interfacial interaction and charge transfer79
A combined EC-STM and EC-AFM investigation of the sulfate adsorption on a Cu(111) electrode surface up to the anodic corrosion potential79
Enhanced thermal and water stability of halide perovskite MAPbBr3 by double-coated hydrogen-bonded polymer network79
Microstructural study of Ni and Ni-20Cr particles plasma sprayed on stainless steel substrate at 300 ˚C78
Structural characterisation and dynamic modelling of pegylated graphene oxide with Ag and Cu nanocluster78
Simultaneously tailor band structure and accelerate charge separation by constructing novel In(OH)3-TiO2 heterojunction for enhanced photocatalytic water reduction78
A 2D-to-3D morphology transitions of gold in organic acid electrolytes: Characterization and application in bioanode design78
CdSe cluster-modified biogenic α-FeOOH based on macroporous biochar for Fenton-like reaction of As(III)78
Formation and superlattice of long-range and highly ordered alicyclic selenolate monolayers on Au(1 1 1) studied by scanning tunneling microscopy77
Microscopic impact mechanism of alkali earth metal poisoning and Ce modification on the deNOx over the γ-Fe2O3 (0 0 1) surface77
Co-Cu-Al-Ox for chloramphenicol degradation: Modification of CoOx coordination and electronic environment by Cu incorporation77
Cellulose-based films with enhanced load of nitrogen containing heterocycles: The impact on the surface morphology and proton conductivity77
Controlled drug release and antibacterial enhancement via NIR-activated CuS-modified TiO2 nanotubes arrays77
Optimizing the oxygen evolution reaction: Role of crystallographic phases in support materials under acidic conditions76
Nanostructured crystalline-amorphous FeCrCoNi-SiC high-entropy alloy thin film with a superior combination of strength and corrosion resistance76
Adsorption of nitrate in water by organosilicon quaternary ammonium salt-modified NiFe layered double oxides: reconstruction and electrostatic interaction76
On the growth of functionally graded self-lubricating layer during a plasma-assisted thermochemical treatment of M50NiL steel76
Crystallization and additional oxide interlayers improve the tribocorrosion resistance of TiO2 nanotubular surfaces formed on Ti6Al4V76
Controllable growth of 2H-1 T′ MoS2/ReS2 heterostructures via chemical vapor deposition76
Significant influence of controllable surface oxygen vacancies of CuO for enhancing sensitivity of glucose detection76
Mo-enhanced passivity of stainless steels studied at metal/oxide interfaces by DFT atomistic modeling76
Aluminum foam sandwich interface enhanced at micro-scale75
The sputtering of titanium magnetron target with increased temperature in reactive atmosphere by gas injection magnetron sputtering technique75
Plasma-enhanced atomic layer deposition of carbon films employing a cyclic process of N2/H2 plasma and α, α’-dichloro-p-xylene as a precursor75
A slippery and icephobic surface based on lubricant-infused metallic glass nanotube array75
Boudouard reaction under graphene cover on Ni(1 1 1)75
Low-density arrays of ultra-small InAs nanostructures obtained by two-stage arsenic exposure during droplet epitaxy75
Machine-learning-empowered identification of initial growth modes for 2D transition metal dichalcogenide thin films75
Spin-state inversion in non-precious Na single atoms decorated NiFe-LDH monolayer for efficient electrocatalytic water oxidation75
Evolution of the atomic and electronic structures during nitridation of the Si(1 1 1) surface under ammonia flux74
Design of disordered cathode hosts for lithium-sulfur batteries using two-dimensional sulfides74
Size and chemistry of 1–2 layer graphene nanosheets at the transition into photoluminescence and assembly with large shifts from blue to red emission74
Se and Fe co-doping in Ni2P/Ni12P5/NF: Highly active and ultra-long stability of the oxygen evolution reaction73
Blue light irradiation-stirred washing high luminescence and highly stable CsPbBrI2 quantum dots modified with CaO for backlight display73
Tuning Brønsted/Lewis acidity ratio on Pt/Al2O3 via DBD plasma for enhanced selectivity in perhydro-dibenzyltoluene dehydrogenation73
Accelerating kinetics of oxygen evolution reaction via expanding interlayer spacing of 1D core–shell layered double hydroxides73
Preparation of a coated ZH-scheme (SnS2@CdS)/TiO2(0 0 1) photocatalyst for phenol degradation with simultaneous Cr(VI) conversion73
Strained induced metallic to semiconductor transitions in 2D Ruddlesden Popper perovskites: A GGA + SOC approach73
Layer stacking effect on structural, vibrational, and electronic properties of Janus-Ga2SeTe crystals73
Texturing In-Situ: N/F Dual-Doped hollow porous carbon nanospheres for advanced Li-S batteries73
Improving polishing efficiency of RB-SiC through femtosecond laser pretreatment73
Dewdrop-like carbon templating for hierarchical rough-layer ZnO towards ultrasensitive NO2 sensor73
Photo-induced liquid-based slippery materials for highly efficient particle aggregation72
Oxygen ion migration induced polarity switchable SrFeOx memristor for high-precision handwriting recognition72
Revealing the nature of surface charging during X-ray photoelectron spectroscopy analysis of thin film insulators with metal capping layers72
Modulating oxygen-vacancy of IrOx@Ti via controllably partial pressures by magnetron sputtering for enhanced electrocatalytic oxygen evolution reaction72
Sb segregation in ultrathin GaAsSb layers: A quantitative analysis of soaking/desorption stages72
Chemical synthesis of Cd1--Zn Cu S Se1- composite thin films for photoelectrochemical solar cell72
Fast-tracking of NH3 interaction with ZnO nanorods and C/ZnO hybrid nanostructures by operando spectroscopy72
A highly stable Tungsten-Doped TiO2-Supported platinum electrocatalyst for oxygen reduction reaction in acidic media72
Effect of CuSO4 on sulfidized cerussite surface properties and its response to the flotation behavior72
High-throughput screening of highly active and selective single-atom catalysts for ammonia synthesis on WB2 (0 0 1) surface72
Slanted nanostructures capped with SiO2 nanospheres for asymmetric hydrophilicity inducing rapid unidirectional water spreading72
CoRu alloy synergistically co-catalyzes effective photocatalytic hydrogen evolution reaction of carbon nitride72
Addressing wear-resistant, bioactive, and bio-selective coatings on the biomedical Ti-6Al-4 V alloy by performing MAO treatment in TMO-rich electrolyte71
In situ synthesis of oxygen-deficient Cu2O on eggshell membranes and study of its efficient photocatalytic activity71
Elucidating the crystal-facet dependent catalytic performance of coupled flake-CuO/Cu-zeolite hybrid catalysts for coal-gas-SCR71
Fabrication of fractal structured soot templated titania-silver nano-surfaces for photocatalysis and SERS sensing71
Green surface treatment of graphite felt using modified TEMPO mediated oxidation for use in vanadium redox flow batteries71
Rationally-designed core–shell structure with double-plasmon effect for efficient and tunable upconversion luminescence emission71
Co-anion exchange prepared 2D structure Ni(Co,Fe)PS for efficient overall water electrolysis70
In situ synthesis of flower-structured ZnO@YFC for the efficient piezocatalytic degradation of tetracycline wastewater: Degradation mechanism and toxicity evolution70
Preparation of magnetic covalent organic framework nanoparticles with multi-active site at room temperature for enrichment of Paclitaxel from Taxus cuspidata70
A highly efficient bifunctional copper catalyst for Baeyer-Villiger oxidation of cyclohexanone: Two different active centers and the reaction path investigation70
New way to nanopattern GaAs surface for subcritical formation of InAs quantum dots70
High-fidelity moulding growth and cross-section shaping of ultrathin monocrystalline silicon nanowires70
MnS nanoparticles embedded uniformly in sulfur/nitrogen-doped porous carbon spheres enhancing lithium-storage performance69
High interfacial thermal conductance across heterogeneous GaN/graphene interface69
Effects of high-temperature thermal reduction on thermal conductivity of reduced graphene oxide polymer composites69
Graphene plasmons-assisted tunable non-specular effect for dimension-adjustable terahertz edge imaging69
In situ modification of the magnetocrystalline anisotropy in cobalt-ferrite microcrystals69
ZnIn2S4 thin films grown by pulsed laser deposition: Effect of electrolyte and illumination conditions on photoanode performance69
The surface modification of NiO@NiSe2 enhanced high energy storage properties for flexible hybrid supercapacitor69
Controlled engineering of tunable 3D-BiOX (X = Cl, Br) hierarchical nanostructures via dopamine-mediated synergetic interactions for efficient visible-light absorption photocatalysis68
Evaluation of AES depth profiles with serious artefacts in C/W multilayers68
Fermi surface of LaSb2 and direct observation of a CDW transition68
Prediction of the catalytic mechanism of hydrogen evolution reaction enhanced by surface oxidation on FCC_CoCrFeNi and Co0.35Cr0.15Fe0.2Mo0.1Ni0.2 multi-principal element alloys based on site preferen68
The assembly of polyoxometalate-graphene oxide composites for photocatalytic removal of organic dye in water68
Effects of hot water on the wettability of superhydrophobic metal surfaces67
Host-guest assembly functionalization through molecular selective adsorption into chiral Kagome-like frameworks67
CoMoO4 enhanced anodized cobalt oxide nanotube as an efficient electrocatalyst for hydrogen evolution reaction67
Steering Pt surface via N-doped carbon layer to highly active CO-tolerant hydrogen oxidation reaction catalyst in alkaline media67
UV-durable superhydrophobic ZnO/SiO2 nanorod arrays on an aluminum substrate using catalyst-free chemical vapor deposition and their corrosion performance67
Effective carrier doping and quantum capacitance manipulation of graphene through two-dimensional solid electrolytes of ScI3 and YBr367
Layered SnSe nanoflakes with anharmonic phonon properties and memristive characteristics67
Two-dimensional nickel–cobalt bimetallic hydroxides towards urea electrooxidation67
Corrosion mode evaluation of Fe-based glassy alloys with metalloid elements by electrochemical noise (EN)67
Effect of coating density on plasma etch resistance and material loss of Y2O3 coatings67
Construction of black phosphorus nanosheets and Ag nanoparticles co-sensitized TiO2 nanorod arrays as high-performance SERS substrate and photocatalyst67
Effects of potassium ions and platinum cocatalysts on the photocatalytic performance of Poly(Heptazine Imides)67
Bands alignment between organic layers of Alq3, Gaq3, Erq3 and graphene on 6H-SiC(0 0 0 1)67
F-GDY and F-GDY/Graphene as anodes in lithium-ion batteries: A first-principle investigation66
Mechanical properties of diamane: Orientation dependence of strength and fracture strain66
Temperature-dependence of magnetron sputtered NiFe films: Structure, morphology, optical, electrical and OER catalytic properties66
Role of Cu2O surface terminations on interface conductivity with graphene66
Growth and optical properties of erbium-doped gallium nitride thin films prepared by pulsed direct current magnetron sputtering66
Porous dehydroxyl cobalt phytate as electrocatalyst for high-efficiency water oxidation66
Construction of Z-scheme Ag/AgCl/Bi2WO6 photocatalysts with enhanced visible-light photocatalytic performance for gaseous toluene degradation66
A comparative nanotribological investigation on amorphous and polycrystalline forms of MoS266
Low-carbon upcycling of spent anode graphite: Integrating graphene and dislocations for sustainable lithium/potassium storage66
Influence of air plasma modification power on surface properties of basalt fibers and basalt/poly(butylene succinate) adhesion65
Surface construction of a novel metal-free g-C3N4-based heterojunction photocatalyst for the efficient removal of bio-toxic antibiotic residues65
Co-doped NiSe synthesized on solid-phase boronized self-supported NFF-B as a bifunctional electrocatalyst enables efficient and stable overall water splitting65
Atomic-scale insights into the tribochemical wear of diamond on quartz surfaces65
First-principles insights into the synergistic chemical–mechanical removal mechanism of 4H-SiC in chemical mechanical polishing65
From DFT investigations of oxygen-implanted molybdenum disulfide to temperature-induced stabilization of MoS2/MoO3 heterostructure65
Electrochemical and surface properties of sulphidised molybdate minerals64
Crystal plane regulation and heterostructure construction of ZnIn2S4/h-BN for boosting photocatalytic hydrogen evolution64
Wettability and anti-fouling performances of microground dental ceramics in relation to surface formation and contact angle compound model64
Effect of oxygen-substituted lattice carbon in Ti3C2 MXene as anchoring material for Li-S battery: DFT calculations and experiments64
Nanodiamond driven structure evolution of ZnO nanorods64
NiSe@Ni12P5 hierarchical nanorod arrays coupled on nickel-copper foam for highly efficient urea oxidation64
Mechanically synthesized TCP/OCP composite coatings on the plasma electrolytic oxidized cold-worked pure titanium for bio-implant use64
High-capacity polyaniline cathode’s electrochemical synthesis and contribution of counterion-enhanced capacity64
Probing Mg anode interfacial and corrosion properties using an organic/inorganic hybrid electrolyte64
Metal-free boron doped g-C3N5 catalyst: Efficient doping regulatory strategy for photocatalytic water splitting64
Performance enhancement of carbon-coated Si nanoparticles for lithium-ion batteries through the generation of lithophilic sites by a simple oxidation process64
Multifunctional passivation agents for improving efficiency and stability of perovskite solar cells: Synergy of methyl and carbonyl groups64
ZnO nanorods with GaSe nanoflakes form a heterojunction for solar water oxidation64
Influence of thickness on the microstructure and performance of BaHfO3-doped EuBa2Cu3O7- layers grown by ultra-fast PLD techniques63
Fabrication of Pd-loaded α-Fe2O3 decorated rGO hybrids for highly sensitive H2 sensing63
Cobalt molybdenum di-selenide surface modification: A path to improved trifunctional catalysis via partial oxygenation63
Improving MgO/Fe insulator-metal interface structure through oxygen-precoating of Fe(0 0 1)63
The behaviors of H atoms and vacancies at W/Lu2O3 interface: First-principles calculations63
Alkyl chain length regulated diverse 2D polymorphic self-assembly of benzothiadiazole-based π-conjugated fluorophore63
Ethyl xanthate adsorption on different surfaces of jamesonite: A DFT study63
A modulator-induced defect strategy to construct different mesopore ratios Zr-based metal-organic frameworks for ultrafast adsorption of heterocyclic aromatic amines63
Chemically functionalized 2D/2D hexagonal boron Nitride/Molybdenum disulfide heterostructure for enhancement of lubrication properties63
Rational design of oxide heterostructure InGaZnO/TiO2 for high-performance thin-film transistors63
Ferroelectric YMnO3 nanoplates for the visible light photocatalytic degradation of doxycycline hydrochloride: Insight into the polarize-induced enhancement63
Corrigendum to “Well-ordered surface metal atoms complexation by deposition of Pd cyclometallated compounds on Ag (1 1 0)” [Appl. Surf. Sci. 606 (2022) 154960]62
Enhancing oxygen evolution over a highly fluorinated porphyrin-based COF covalently anchored on graphene oxide62
Novel core-shell SnIn4S8@Bi2MoO6 heterojunction with highly-enhanced photocatalytic activity for visible light-driven Cr (VI) reduction62
Inherently porous Co3O4@NiO core–shell hierarchical material for excellent electrochemical performance of supercapacitors62
Experimental and theoretical insight into DSSCs mechanism influenced by different doping metal ions62
Thiophene insertion and lanthanum molybdate modification of g-C3N4 for enhanced visible-light-driven photoactivity in tetracycline degradation62
Oxidative degradation of formaldehyde by birnessite: Synergistic interaction of Mn(Ⅲ) and oxygen vacancies62
Robust packaging of printed flexible electronics with functional SiOx coatings via cold atmospheric plasma assisted deposition62
Elucidation of hole transport mechanism in efficient energy cascade organic photovoltaics using triple donor system62
Selective laser melting of an Mg/Metallic Glass hybrid for significantly improving chemical and mechanical performances61
Synthesis and characterization of hierarchical Sr-doped ZnO hexagonal nanodisks as an efficient photocatalyst for the degradation of methylene blue dye under sunlight irradiation61
Triggering sustainable regeneration of Fe2+ by S-scheme Bi2Fe4O9/BiOBr heterojunction toward highly efficient peroxymonosulfate activation for visible-light-driven removal of thiabendazole61
Tuning single metal atoms anchored on graphdiyne for highly efficient and selective nitrate electroreduction to ammonia under aqueous environments: A computational study61
Chromium catalysts supported on carbon nanotubes and graphene nanoflakes for CO2-assisted oxidative dehydrogenation of propane61
Evolution of In2O3 morphology from belt to fibrous-like structure for ethanol detection at low working temperature induced by Cr-addition61
Single-crystal Cu(1 1 1) foil preparation by direct bonding technology61
A perspective on ToF-SIMS analysis of biosensor interfaces: Controlling and optimizing multi-molecular composition, immobilization through bioprinting, molecular orientation61
Cobalt diffusion during the initial stage of CVD diamond growth on cemented carbide – A molecular dynamics and experimental study61
Improvement of Ce Nb doping on low-temperature catalytic activity of a VOx-based catalyst for NH3–SCR reaction61
Photocatalytic degradation activity and pathways of moxifloxacin over metal ion-doped Bi2O3 nanofibres prepared via electrospinning61
Exploring the anchoring effect of surface functionalized 2D electrides Ca2N and Y2C in lithium sulfur battery: First principle study60
Double-shelled Mn-doped NiCo2S4 hollow nanowire arrays for high-reactivity hybrid supercapacitors60
Expounding lemonal terpenoids as corrosion inhibitors for copper using DFT based calculations60
Photoanode/electrolyte interface modification in solar PEC cells sensitized with Cd0.8Zn0.2S quantum dots for efficient dye degradation60
Growth and mobility of copper in industrial Cu/ZnO/Al2O3 hydrogenation catalyst investigated by in situ gas-cell scanning transmission electron microscopy60
The (0 0 2) exposing facets of WO3 boosting photocatalytic degradation of nitrobenzene60
Multifunctional continuous solid solution Na0.9Mg0.45Ti3.55O8-Na2Fe2Ti6O16: Preparation, characterization, magnetism, dual absorption, adsorption, and photocatalysis60
High-performance non-enzymatic glucose sensing on nanocomposite electrocatalysts of nickel phthalocyanine nanorods and nitrogen doped-reduced graphene oxide nanosheets60
0.1985490322113