Applied Surface Science

Article	Citations
Correlation between the structural morphology and device characteristics of quantum dot based emission layer blended with small molecular hole transport material	457
Influence of thickness on the microstructure and performance of BaHfO3-doped EuBa2Cu3O7- layers grown by ultra-fast PLD techniques	316
Editorial Board	220
Editorial Board	216
Editorial Board	167
Editorial Board	167
UV laser generated micro structured black surface on commercial TiO2-containing glass	157
Editorial Board	156
Wettability transition of femtosecond laser patterned nodular cast iron (NCI) substrate	153
Mechanical properties of diamane: Orientation dependence of strength and fracture strain	146
Corrigendum to “Spatially inhomogeneous operation of phase-change memory” [Appl. Surf. Sci. 589 (2022) 153026]	140
Corrigendum to “Well-ordered surface metal atoms complexation by deposition of Pd cyclometallated compounds on Ag (1 1 0)” [Appl. Surf. Sci. 606 (2022) 154960]	138
Ethyl xanthate adsorption on different surfaces of jamesonite: A DFT study	134
Corrigendum to “Electrochemical study on the effect of catalytic current collecting layer on thin film La0.6Sr0.4Co0.8Fe0.2O3−δ (LSCF) cathode” [Appl. Surf. Sci. 509 (2020) 145224]	134
Microwave treatment effect on the enhanced basicity of porous clay heterostructured composites derived from Laponite	133
Chromatographic propane-propylene separation by different zeolites obtained from rice husk ashes	132
Multilevel phase transition behavior of In2Se3-doped with Sb materials based on flexible polyimide substrate	127
Effect of oxygen-substituted lattice carbon in Ti3C2 MXene as anchoring material for Li-S battery: DFT calculations and experiments	126
Electrochemical and surface properties of sulphidised molybdate minerals	126
Study of Fe-C phase formulations through Fe self-diffusion during thin film growth	123
Nanodiamond driven structure evolution of ZnO nanorods	122
Low-pressure plasma process for the dry synthesis of cactus-like Au-TiO2 nanocatalysts for toluene degradation	122
On the growth of functionally graded self-lubricating layer during a plasma-assisted thermochemical treatment of M50NiL steel	121
A functionalization approach of decorative poplar veneer accomplished via reactive dyeing followed by in-situ synthesis of ZnO-Ag nanoparticles	121
Layer stacking effect on structural, vibrational, and electronic properties of Janus-Ga2SeTe crystals	119

Improvement of interfacial electron extraction efficiency by suppressing Auger recombination in an indium-doped mixed cationic perovskite heterostructure	118
Size and chemistry of 1–2 layer graphene nanosheets at the transition into photoluminescence and assembly with large shifts from blue to red emission	117
Fluoride-incorporated apatite coating on resin-based composite via laser-assisted rapid pseudo-biomineralization	116
Conformable thin film organic electrochemical transistor array featuring tissue-like softness and ultralow biofouling	115
Self-assembled epitaxial BiFeO3 nanostructures as a tailored platform for vertically aligned nanocomposites development	114
Fermi surface of LaSb2 and direct observation of a CDW transition	112
Study on the multi-zone direct current pyrophosphate electrodeposition of black film with high light absorptivity	112
Elevating performance of AlOxFy anti-reflection coating via controllable HF vapor fluorination	112
Robust packaging of printed flexible electronics with functional SiOx coatings via cold atmospheric plasma assisted deposition	111
Effects of fs pulsed laser ablation on synthetic zeolite targets	111
Fluoride-assisted highly-active tungsten oxide with modulating exposed facets and defect sites for efficient ppb-level acetone detection	111
Spray deposition of colorimetric H2 detector with Pd/MoO3 nanocomposites for rapid hydrogen leakage monitoring at room temperature	110
Formation and superlattice of long-range and highly ordered alicyclic selenolate monolayers on Au(1 1 1) studied by scanning tunneling microscopy	109
Toward anti-fouling properties and enhanced performance in separation process - carbon nanotubes - PVDF hybrids	108
Multifunctional passivation agents for improving efficiency and stability of perovskite solar cells: Synergy of methyl and carbonyl groups	107
Efficient dioctyl phthalate hydrogenation over halloysite nanotube-loaded nickel-based catalyst: Surface and interface engineering	105
Construction of black phosphorus nanosheets and Ag nanoparticles co-sensitized TiO2 nanorod arrays as high-performance SERS substrate and photocatalyst	104
Single-atom Au atomically trapped in WO3− catalyst for selective demethoxylation of lignin-derived guaiacols	104
Composite nanofilms of graphene and nickel: Fabrication, cw linear and nonlinear optical properties	104
ZnO nanorods with GaSe nanoflakes form a heterojunction for solar water oxidation	103
Assessing the role of surface carbon on the surface stability and reactivity of β-Mo2C catalysts	103
Texturing In-Situ: N/F Dual-Doped hollow porous carbon nanospheres for advanced Li-S batteries	103
Physical properties of crystalline NaNbO3 thin film grown on Sr2Nb3O10 nanosheets at low temperatures for piezoelectric energy harvesters	102
Strain and orientation modulated optoelectronic properties of La-doped SrSnO3 epitaxial films	102
Skew trapezoidal bipyramidal distortion in MoS6 unit stabilizing distorted phases of 1T-MoS2 single layer	100
The assembly of polyoxometalate-graphene oxide composites for photocatalytic removal of organic dye in water	100
A comparative nanotribological investigation on amorphous and polycrystalline forms of MoS2	100
Evaluation of AES depth profiles with serious artefacts in C/W multilayers	100
Editorial Board	99
Computational screening of 2D ternary penta-materials with auxetic properties and efficient photocatalytic CO2 reduction	98
Corrigendum to “Mixed metal oxide: A new class of catalyst for methanol activation” [Appl. Surf. Sci. 534 (2020) 147449]	97
Se and Fe co-doping in Ni2P/Ni12P5/NF: Highly active and ultra-long stability of the oxygen evolution reaction	96
Microscopic impact mechanism of alkali earth metal poisoning and Ce modification on the deNOx over the γ-Fe2O3 (0 0 1) surface	95
Nano-and micro-engineered vertical graphene/Ni for superior optical absorption	95
Editorial Board	95
Alkyl chain length regulated diverse 2D polymorphic self-assembly of benzothiadiazole-based π-conjugated fluorophore	94
Improvement of Ce Nb doping on low-temperature catalytic activity of a VOx-based catalyst for NH3–SCR reaction	94
Transformation of free-standing ZnO nanorods upon Er doping	93
Reductant-optimized exchange strategy to construct the water-resistant shell of Mn4+-doped phosphors	92
Inherently porous Co3O4@NiO core–shell hierarchical material for excellent electrochemical performance of supercapacitors	92
Single-crystal Cu(1 1 1) foil preparation by direct bonding technology	91
Kinetic study of hybrid supercapacitor using transition metal quantum dots @ graphenes composite as a model electrode	91
The (0 0 2) exposing facets of WO3 boosting photocatalytic degradation of nitrobenzene	90
Enhanced visible to near-infrared photodetectors made from MoS2-based mixed-dimensional structures	90
Reactive molecular dynamics simulations of lysozyme desorption under Ar cluster impact	90
In situ modification of the magnetocrystalline anisotropy in cobalt-ferrite microcrystals	88
Effects of hot water on the wettability of superhydrophobic metal surfaces	88
Facile and controllable synthesis of AuCu aerogels for the enhanced degradation of 4-nitrophenol	87
Covalent triazine framework featuring single electron Co2+ centered in intact porphyrin units for efficient CO2 photoreduction	87
CoMoO4 enhanced anodized cobalt oxide nanotube as an efficient electrocatalyst for hydrogen evolution reaction	86

A modulator-induced defect strategy to construct different mesopore ratios Zr-based metal-organic frameworks for ultrafast adsorption of heterocyclic aromatic amines	86
A new 2D metallic K3Cl2 nanosheet as a promising candidate of NO2 gas sensor and capturer	86
Oxygen ion migration induced polarity switchable SrFeOx memristor for high-precision handwriting recognition	84
Efficient light-driven peroxymonosulfate activation by CoS /TiO nanorod for rapid degradation of levofloxacin: Performance and continuous degradation process	84
Assessing factors that determine adatom migration and clustering on a thin film oxide; Pt1 and Rh1 on the “29” CuxO/Cu(1 1 1) surface	84
Two-dimensional nickel–cobalt bimetallic hydroxides towards urea electrooxidation	84
Preparation of a coated ZH-scheme (SnS2@CdS)/TiO2(0 0 1) photocatalyst for phenol degradation with simultaneous Cr(VI) conversion	84
One-step rapid preparation of superhydrophobic peek with mechanical, and chemical stability	84
Hollow macroporous CeO2/β-Bi2O3 heterostructure sphere via one-step spray solution combustion synthesis for efficient photocatalysis	84
A 2D-to-3D morphology transitions of gold in organic acid electrolytes: Characterization and application in bioanode design	83
Improved surface passivation of lead sulfide quantum dots using less sterically crowded alkylammonium iodides	83
Effect of CuSO4 on sulfidized cerussite surface properties and its response to the flotation behavior	83
Cotton fabric decorated with manganese oxide nanorods as a supercapacitive flexible electrode for wearable electronics	83
Effect of Cu nanoparticles on the tribological performance of polydopamine + polytetrafluoroethylene coatings in oil-lubricated condition	83
A slippery and icephobic surface based on lubricant-infused metallic glass nanotube array	82
NiSe@Ni12P5 hierarchical nanorod arrays coupled on nickel-copper foam for highly efficient urea oxidation	82
Design of disordered cathode hosts for lithium-sulfur batteries using two-dimensional sulfides	82
Photoanode/electrolyte interface modification in solar PEC cells sensitized with Cd0.8Zn0.2S quantum dots for efficient dye degradation	81
Bioinspired in situ self-catalyzing strategy towards graphene nanosheets with hierarchical structure derived from biomass for advanced supercapacitors	81
Superior sodium storage in anatase/bronze TiO2 nanofibers through surface phosphorylation	80
Co-Cu-Al-Ox for chloramphenicol degradation: Modification of CoOx coordination and electronic environment by Cu incorporation	80
Evolution of the atomic and electronic structures during nitridation of the Si(1 1 1) surface under ammonia flux	80
Smooth surface and mechanically Durable integrated flexible transparent electrode based on 2D Semi-Embedded ultrafine Polyimide-Silver composite nanofiber network	80
Interfacial structures and reactivities of CeO2/Cu(1 1 1) catalyst with strong interfacial interaction and charge transfer	80
Strain-driven charge localization in lightly hole-doped manganite epitaxial films	80
Evolution of copper step beams during graphene growth by CVD method	79
Surface aspects of novel Bio-HEAs MAO-treated in a Ca-, P-, and Mg-rich electrolyte	79
Spin-state inversion in non-precious Na single atoms decorated NiFe-LDH monolayer for efficient electrocatalytic water oxidation	78
Low-density arrays of ultra-small InAs nanostructures obtained by two-stage arsenic exposure during droplet epitaxy	78
Hole-injection barrier across the intermolecular interaction mediated interfacial DNTT layer	78
Fast-tracking of NH3 interaction with ZnO nanorods and C/ZnO hybrid nanostructures by operando spectroscopy	78
Dual-functional electrochemical bio-sensor built from Cu2O for sensitively detecting the thiols and Hg2+	78
Growth and mobility of copper in industrial Cu/ZnO/Al2O3 hydrogenation catalyst investigated by in situ gas-cell scanning transmission electron microscopy	78
New way to nanopattern GaAs surface for subcritical formation of InAs quantum dots	77
Non-local dielectric screening effects in phosphorene/g-C3N4 heterojunctions	77
Combinatorial aerosol deposition of bismuth–antimony thermoelectric coatings with tunable composition	77
Controlled drug release and antibacterial enhancement via NIR-activated CuS-modified TiO2 nanotubes arrays	77
Slanted nanostructures capped with SiO2 nanospheres for asymmetric hydrophilicity inducing rapid unidirectional water spreading	77
Crystal facet regulation enhances the photocatalytic performance for gaseous toluene degradation in BiOCl by promoting the activation of the methyl C(sp3)-H bond	76
Low temperature growth of semi-polar InN(101	76
Understanding the promotion effect of Pt in the reaction system of water gas shift reaction catalyzed by Pt/α-MoC from theoretical perspectives	76
Cobalt molybdenum di-selenide surface modification: A path to improved trifunctional catalysis via partial oxygenation	76
Growth of singly orientated MoSe2 monolayer on Al2O3(112	75
Strained induced metallic to semiconductor transitions in 2D Ruddlesden Popper perovskites: A GGA + SOC approach	75
From DFT investigations of oxygen-implanted molybdenum disulfide to temperature-induced stabilization of MoS2/MoO3 heterostructure	74
A perspective on ToF-SIMS analysis of biosensor interfaces: Controlling and optimizing multi-molecular composition, immobilization through bioprinting, molecular orientation	74
Crystallization and additional oxide interlayers improve the tribocorrosion resistance of TiO2 nanotubular surfaces formed on Ti6Al4V	74
Machine-learning-empowered identification of initial growth modes for 2D transition metal dichalcogenide thin films	74
Multifunctional continuous solid solution Na0.9Mg0.45Ti3.55O8-Na2Fe2Ti6O16: Preparation, characterization, magnetism, dual absorption, adsorption, and photocatalysis	74
CO2-induced in-situ surface reconfiguration of strontium cobaltite-based perovskite for accelerated oxygen reduction reaction	74
Atomic layer deposition of biocompatible multifunctional ZnO-TiO2 nanocoatings on the surface of additively manufactured nitinol	74
Sb segregation in ultrathin GaAsSb layers: A quantitative analysis of soaking/desorption stages	74
Influence of Au2+ ions irradiation on the structure and wear resistance of amorphous MoS2 films	73
Host-guest assembly functionalization through molecular selective adsorption into chiral Kagome-like frameworks	73
CdSe cluster-modified biogenic α-FeOOH based on macroporous biochar for Fenton-like reaction of As(III)	73
Oxidative degradation of formaldehyde by birnessite: Synergistic interaction of Mn(Ⅲ) and oxygen vacancies	73
Nanostructured crystalline-amorphous FeCrCoNi-SiC high-entropy alloy thin film with a superior combination of strength and corrosion resistance	73
Green surface treatment of graphite felt using modified TEMPO mediated oxidation for use in vanadium redox flow batteries	73
Simulation of chemical reactions with methanol and oxalic acid on 4H-SiC surfaces before and after nanoabrasion	72
Crystalline grain engineered CsPbIBr2 films for indoor photovoltaics	72
Evolution of In2O3 morphology from belt to fibrous-like structure for ethanol detection at low working temperature induced by Cr-addition	72
Insight into profiled CNT/polymer interphase: A molecular dynamic simulation study of load transfer and shock response	72
Bimetallic Cu–Ni core–shell nanoparticles anchored N-doped reduced graphene oxide as a high-performance bifunctional electrocatalyst for alkaline water splitting	72
Mechanistic study of low-temperature CO oxidation over CuO/Cu2O interfaces with oxygen vacancy modification	71
3D-printed plasma-treated super-amphiphilic microgroove surface for outperformance of liquid vertical transportation	71
A combined EC-STM and EC-AFM investigation of the sulfate adsorption on a Cu(111) electrode surface up to the anodic corrosion potential	71
A highly efficient bifunctional copper catalyst for Baeyer-Villiger oxidation of cyclohexanone: Two different active centers and the reaction path investigation	71
Enhanced thermal and water stability of halide perovskite MAPbBr3 by double-coated hydrogen-bonded polymer network	71
Microstructural study of Ni and Ni-20Cr particles plasma sprayed on stainless steel substrate at 300 ˚C	71
Simultaneously tailor band structure and accelerate charge separation by constructing novel In(OH)3-TiO2 heterojunction for enhanced photocatalytic water reduction	71
Enhanced resistive switching of silver copper iodide thin films prepared by interfacial phase formation	70
Structural, magnetic and electrocatalytic properties of rock salt oxide nanofibers (Ni0.2Mg0.2Zn0.2Cu0.2-xCo0.2+x)O produced by air-heated solution blow spinning (A-HSBS) for oxygen evolution reaction	70
Enhanced oxygen evolution on A-site defect perovskite oxide through interfacial engineering	70
Structural characterisation and dynamic modelling of pegylated graphene oxide with Ag and Cu nanocluster	70
Boudouard reaction under graphene cover on Ni(1 1 1)	70
Exploring the CO2 reduction reaction mechanism on Pt/TiO2 with the ambient-pressure X-ray photoelectron spectroscopy	70
Improving MgO/Fe insulator-metal interface structure through oxygen-precoating of Fe(0 0 1)	69
CoOx supported on rice-husk derived SiO2 for styrene combustion: The balance of low temperature activity and thermal stability	69
Selective hydrogenation of furfural over supported nickel and nickel phosphide catalysts	69
Fabrication of acanthosphere-like SiO2@Ag with designed angular tip silver shape for construction of superhydrophobic-electromagnetic shielding surface by imitating lotus leaf structure	69

Hyper-conjugated polyaniline delivering extraordinary electrical and electrochemical properties in supercapacitors	68
Unraveling the friction response from selective hydrogenation of textured amorphous carbon surface	68
Excellent sulfur and water resistance for CO oxidation on Pt single-atom-catalyst supported by defective graphene: The effect of vacancy type	68
Modulating the Schottky barrier heights of plasmonic metal/semiconductor heterojunctions by graphene substrates for boosting photocatalytic water oxidation	68
Wettability and anti-fouling performances of microground dental ceramics in relation to surface formation and contact angle compound model	68
Graphene quantum dots synthesis using waste unburnt carbon: Implications for optoelectronics	68
Chemical synthesis of Cd1--Zn Cu S Se1- composite thin films for photoelectrochemical solar cell	68
Effects of potassium ions and platinum cocatalysts on the photocatalytic performance of Poly(Heptazine Imides)	68
Water electrolysis and desalination using an AEM/CEM hybrid electrochemical system	68
Photo-induced liquid-based slippery materials for highly efficient particle aggregation	68
Transition-metal‐doped ceria carried on two-dimensional vermiculite for selective catalytic reduction of NO with CO: Experiments and density functional theory	68
Ultrathin Fe2P nanosheet co-catalyst CdS nanorod: The promising photocatalyst with ultrahigh photocatalytic H2 production activity	68
Zr-doped α-FeOOH with high faradaic efficiency for electrochemical nitrogen reduction reaction	67
Steering Pt surface via N-doped carbon layer to highly active CO-tolerant hydrogen oxidation reaction catalyst in alkaline media	67
Uracil derivative-assisted universal synthesis of defective 2-dimensional porous flaky carbon nitride for efficient photocatalytic CO2 reduction	67
Femtosecond laser nano-structuring for surface plasmon resonance-based detection of uranium	67
ZIF-derived PtCu/N-DC dodecahedrons: Synergistic enhancement mechanism of methanol oxidation activity and poisoning resistance under low platinum loading	67
Atomic-scale insights into the tribochemical wear of diamond on quartz surfaces	66
Cellulose-based films with enhanced load of nitrogen containing heterocycles: The impact on the surface morphology and proton conductivity	66
Semiconductive vertical graphene nanoribbons self-assembled on diamond (1 0 0) surface by oxidation: A DFT study	66
Modulating oxygen-vacancy of IrOx@Ti via controllably partial pressures by magnetron sputtering for enhanced electrocatalytic oxygen evolution reaction	66
Nepenthes-inspired hierarchical ZnIn2S4/Ru nanotubes with chemical bond-mediated interface enable efficient photocatalytic benzyl alcohol oxidation	66
The sputtering of titanium magnetron target with increased temperature in reactive atmosphere by gas injection magnetron sputtering technique	66
Fe3O4-protected gold nanoparticles: New plasmonic-magnetic nanomaterial for Raman analysis of surfaces	66
Regulation of oxygen vacancies and electronic structures by substituting Ba2+ at A-sites of LaNi0.5Mn0.5O3 double perovskites enabling high-performance catalysts for Mg-air batteries	66
Investigation of in-situ synthesized WC-Ni coating with TiC as heterogeneous nucleation site: First-principles calculation and experimental research	65
Significant influence of controllable surface oxygen vacancies of CuO for enhancing sensitivity of glucose detection	65
An investigation of the thermal stability and mechanical properties of carbon framework materials hybridized by graphene and double benzene rings through combining first-principles calculations and cl	65
Synthesis and in-depth interfacial characterization of 2D electron gases formed in Si3N4/Al//KTaO3 heterostructures	65
Passive behavior of TNB intermetallic and Inconel 625 in electrochemical machining	65
Flexible self-supporting metal-free N-doped graphene membrane as an electrocatalyst for oxygen evolution reaction	65
Covalent organic framework derived Mo2C-MoNi4 chainmail catalysts for hydrogen evolution	65
Role of Cu2O surface terminations on interface conductivity with graphene	65
Rationally-designed core–shell structure with double-plasmon effect for efficient and tunable upconversion luminescence emission	65
Low temperature electrogalvanization: Texture and corrosion behavior	65
Ultrafast real-time tracing of surface electric field generated via hot electron transport in polar semiconductors	64
Adsorption and modification behavior of single atoms on the surface of single vacancy graphene: Machine learning accelerated first principle computations	64
Hierarchically pyridinic-nitrogen enriched porous carbon for advanced sodium-ion and lithium-sulfur batteries: Electrochemical performance and in situ Raman spectroscopy investigations	64
Controlling the optical and morphological stability of 4-mercaptobenzoic acid-modified triangular silver nanoplates in saline environments	64
Blue light irradiation-stirred washing high luminescence and highly stable CsPbBrI2 quantum dots modified with CaO for backlight display	64
The surface modification of NiO@NiSe2 enhanced high energy storage properties for flexible hybrid supercapacitor	64
Effect of plasmonic metal (Cu, Ag, and Au) loading over the physicochemical and photocatalytic properties of Mg-Al LDH towards degradation of tetracycline under LED light	64
In-situ liquid-phase transformation of SnS2/CNTs composite from SnO2/CNTs for high performance lithium-ion battery anode	64
Fabrication of fractal structured soot templated titania-silver nano-surfaces for photocatalysis and SERS sensing	64
Effects of Mo single-doping and Mo-Al co-doping on ZnO transparent conductive films	64
Selective laser melting of an Mg/Metallic Glass hybrid for significantly improving chemical and mechanical performances	64
Defects-curated bipolar resistive switching and magnetism in CuxO films	64
Bands alignment between organic layers of Alq3, Gaq3, Erq3 and graphene on 6H-SiC(0 0 0 1)	63
Probing Mg anode interfacial and corrosion properties using an organic/inorganic hybrid electrolyte	63
High performance broadband photodetector in two-dimensional metal dichalcogenides mediated by topologically protected surface state	63
Mechanistic studies on defective hBN-supported metal-nonmetal synergistic catalysis for urea electrosynthesis	63
Effect of micro-strain and (100) texture intensity on corrosion behaviors of NiTi alloy via laser powder bed fusion	63
Ultrahigh hydrogen storage using metal-decorated defected biphenylene	63
Surface construction of a novel metal-free g-C3N4-based heterojunction photocatalyst for the efficient removal of bio-toxic antibiotic residues	63
Experimental and theoretical insight into DSSCs mechanism influenced by different doping metal ions	63
Self-assembly of anionic surfactant and its effect on oil–water interface: Implications for enhanced oil recovery	63
Effective design of MnO2 nanoparticles embedded in laser-induced graphene as shape-controllable electrodes for flexible planar microsupercapacitors	63
Metal organic framework derived CuSx/C with plentiful S-vacancies for efficient heterogenous activation of peroxymonosulfate	63
The behaviors of H atoms and vacancies at W/Lu2O3 interface: First-principles calculations	63
In situ synthesis of flower-structured ZnO@YFC for the efficient piezocatalytic degradation of tetracycline wastewater: Degradation mechanism and toxicity evolution	63
A bowl-shaped structure-controllable hydrothermal carbon experiment design combined with DFT simulation: Efficient adsorption of Cd and Pb in coal gangue accumulation areas	63
Spatially restricted strategy to construct crystalline carbon nitride nanosheet assists exciton dissociation to enhance photocatalytic hydrogen evolution activity	63
Facile synthetic approach to produce optimized molybdenum carbide catalyst for alkaline HER	62
Surface oxygenous groups modified graphitic carbon nitride with significant positive shift of valence band for efficient photocatalytic oxidation	62
Removal of lead from aqueous solution by synergistic interaction between LiCoO2 and tourmaline: Synthesis, characterization and mechanism investigation	62
Femtosecond Bessel beam induced ladder-like LIPSS on trimetallic surface for SERS-based sensing of Tetryl and PETN	62
Unraveling the mechanism to form MoS2	62
Plasma-enhanced atomic layer deposition of carbon films employing a cyclic process of N2/H2 plasma and α, α’-dichloro-p-xylene as a precursor	62
Synergistic impact of surfactant and sodium oleate on dolomite removal from fluorapatite via reverse flotation	62
Gas selectivity regulation of monolayer SnS by introducing nonmetallic dopants: A combined theoretical and experimental investigation	62
Optimizing the oxygen evolution reaction: Role of crystallographic phases in support materials under acidic conditions	61
Effective carrier doping and quantum capacitance manipulation of graphene through two-dimensional solid electrolytes of ScI3 and YBr3	61
Graphene plasmons-assisted tunable non-specular effect for dimension-adjustable terahertz edge imaging	61
Improved passivation ability via tuning dislocation cell substructures for FeCoCrNiMn high-entropy alloy fabricated by laser powder bed fusion	61
Effect of passivation behavior of SAC305 alloy on the structure and defects of surface oxide film	61
A novel dual-functional coating based on curcumin/APEG polymer with antibacterial and antifouling properties	61
Expounding lemonal terpenoids as corrosion inhibitors for copper using DFT based calculations	61
Investigating the impact of silane on different surface modified stainless steel ultra-thin strips and the bonding interface of stainless-steel bonded with epoxy	61
UV-durable superhydrophobic ZnO/SiO2 nanorod arrays on an aluminum substrate using catalyst-free chemical vapor deposition and their corrosion performance	61
Three-dimensional ordered macroporous design of heterogeneous nickel-iron phosphide as bifunctional electrocatalyst for enhanced overall water splitting	61
Surface iron concentration gradient: A strategy to suppress Mn3+ Jahn-Teller effect in lithium manganese iron phosphate	61
Aluminum foam sandwich interface enhanced at micro-scale	61
High interfacial thermal conductance across heterogeneous GaN/graphene interface	61
Cobalt diffusion during the initial stage of CVD diamond growth on cemented carbide – A molecular dynamics and experimental study	61
Performance improvement of MOCVD grown ZnGa2O4 based NO gas sensors using plasma surface treatment	60
Porous dehydroxyl cobalt phytate as electrocatalyst for high-efficiency water oxidation	60
Insights into the atomic structure of oxygen vacancy on Bi2MoO6/MXene heterojunction and its role for boosting photocatalytic NO oxidation	60
Understanding interface evolution during explosive welding of silver foil and Q235 substrate through experimental observation coupled with simulation	60
Spectroscopic analysis of color origins in titanium-based thin films deposited by cathodic arc deposition	60
Controlled engineering of tunable 3D-BiOX (X = Cl, Br) hierarchical nanostructures via dopamine-mediated synergetic interactions for efficient visible-light absorption photocatalysis	60
Chemically functionalized 2D/2D hexagonal boron Nitride/Molybdenum disulfide heterostructure for enhancement of lubrication properties	60
Functionalization of two-dimensional PbTiO3 film by surface modification: A first-principles study	60
Surface engineering of CdS with ternary Bi/Bi2MoO6-MoS2 heterojunctions for enhanced photoexcited charge separation in solar-driven hydrogen evolution reaction	60
Electrocatalytic oxygen evolution reaction at IrOx supported by Ni/Co-ZIF-67: Controlled ratio of metallic Ir and Ir3+ states	60
Performance enhancement of carbon-coated Si nanoparticles for lithium-ion batteries through the generation of lithophilic sites by a simple oxidation process	60