Polymer Bulletin

Article	Citations
Two Co(II) coordination polymers: clinical application values on clinic infection by inhibiting the growth of Gram-positive bacteria	471
Exploring the potential use of natural polymers to enhance the performance of MXene/MOF-5 nanocarrier in loading and co-loading of doxorubicin and curcumin	222
Harnessing magnetic polymeric composites for sustainable treatment of reactive Orange-122 dye and textile effluent: batch and column studies	207
Mechanical and dielectric properties of ECR-glass/polyimide-based composites	113
Encapsulation of orange oil by colloidal carriers based on PCL/Pluronic F68 nanoparticles for controlled delivery	99
Water absorption kinetics of palygorskite nanoclay/polypropylene composite foams	85
Properties of poly(methacrylate)s bearing hydroxyurethane structures synthesized by various amines with poly(methacrylate)s containing five-membered cyclic carbonates obtained from poly(glycidyl metha	76
Flocculating properties of 2-acrylamido-2-methyl-1-propane sulfonic acid-co-allylamine polyampholytic copolymers	73
Effects of monomer purity on AA-BB polycondensation: a Monte Carlo study	71
Electrochemical deposited pixel matrix for polymer light-emitting displays	70
Toward the reuse of styrene–butadiene (SBRr) waste from the shoes industry: production and compatibilization of BioPE/SBRr blends	64
Electrospinning and electrospraying of polybutylene succinate/esterified cellulose nanofibril composites	64
Mercuric (II) up-taking from industrial wastewater based on poly(aniline-co-N-(2-hydroxyethyl)aniline as new sorbent	64
Fabrication and investigation antibacterial properties of green cross-linked PVA/GO/L-Arg-Cu electrospun nanofiber	64
Effect of hydration conditions in thermal and mechanical properties of injection-molded glass fiber/polyamide-6	61
Calcium alginate microspheres coated by bio-based UV-cured resin with high water retention performance	57
Enhanced adsorption of crystal violet from aqueous solution by polyethyleneimine-modified magnetic hydrogel nanocomposites	56
Characterization of swelling behavior and elastomer properties of acrylate polymers containing 2-ethylhexyl and isobornyl esters	54
Sustainable agricultural solutions: biodegradable nutrient-release films made from Salix psammophila and wheat straw	53
Hydrophobic modification of cellulose nanocrystals refined via non-fuming process from Leucaena leucocephala	53
Development of lignin biochar and its incorporation in cellulose hydrogels for water decontamination	53
Effects of essential oil on the properties of egg white/polyacrylamide (EW/PAAm) Pickering emulsion hydrogels (PEHs) via UV crosslinking	50
Thermo-responsive release of rhodamine B in the pore-selective poly(N-isopropylacrylamide) immobilized honeycomb-patterned porous film	48
A comprehensive review on nanocellulose-based membranes: methods, mechanism, and applications in wastewater treatment	47
Development of phosphorous-based melamine–vanillin imine precursor for flame-retardant polyurethane coating	47

Plant-mediated synthesis of iron oxide nanoparticles/ polyvinyl alcohol nanocomposite and exploring their potential adsorption properties against selected heavy metals	44
Biocompatible PVA–chitosan hydrogel enriched with collagen hydrolysate and Couroupita guianensis flower extract for enhanced wound-healing and antibacterial activity	43
Infrared spectra of the main optical properties of poly(methyl methacrylate) thin films	41
Evaluation of physical, mechanical and thermal properties of epoxy composites filled with bio-fiber derived from Bambara nut shell filler	40
Effect of chain extenders on the thermal and thermodegradation behavior of carbonatodiol thermoplastic polyurethane	39
Synthesis of unsaturated bio-based polypropylene fumarate/kaolinite nanocomposites via in situ polymerization	38
Facile route for processing natural polymers for the formulation of new low-cost hydrophobic protective hybrid coatings for carbon steel in petroleum industry	37
Chemical modification of alginate with tosylmethyl isocyanide, propionaldehyde and octylamine via the Ugi reaction for hydrophobic drug delivery	37
Self-healing carboxylic acid-cured epoxy networks driven by the cyclodextrin–cyclohexane host–guest interaction	36
Furan-based polymer: evaluating the cytogenotoxic profile from starting materials to the final product	36
Impact of NaI/KI blending on structural, optical, and impedance properties of sodium carboxymethyl cellulose biopolymer films	36
Preparation and characterization of polyaniline–dodecylbenzene sulfonic acid–cadmium oxide (PANI-DBSA-CdO) composites: as an electrode material for energy storage applications	35
Synthesis of bi-functional amphiphilic acrylamide copolymers based on polymerizable spans for prospective EOR	35
A review on the physicochemical properties and utilization of date seeds in value-added engineering products	34
A review of the mechanical, thermal and tribological properties of graphene reinforced polymer nanocomposites: a molecular dynamics simulations methods	33
Enhancing performance and reliability: investigating failure morphology and statistical analysis of reinforced polylactic acid for application of transtibial prosthetic socket	33
An all-biomass adsorbent: competitive removal and correlative mechanism of Cu2+, Pb2+, Cd2+ from multi-element aqueous solutions	32
Co-electrospun nanofibers of gelatin and chitosan–polyvinyl alcohol–eugenol for wound dressing applications	32
Self-assembly and thermal behavior of amphiphilic di-block copolymers of poly(methyl methacrylate)-block-poly(ethylene oxide) (PMMA-b-PEO)	31
Dynamic mechanical characteristics of aged silicone rubber blend	31
Thermal stability and optimization of graphene oxide incorporated chitosan and sodium alginate based nanocomposite containing inclusion complexes of paracetamol and β-cyclodextrin for prolonged drug d	31
Development of a local drug delivery system for promoting the regeneration of infective bone defects: composite films with controlled properties	31
Morphology and mineral encrustations of density-separated tire- and road-wear particles collected in Charleston, South Carolina	30
Chemical synthesis and characterization of poly (pyrrole-co-o-aminophenol)/chitosan composite	30
Structure–property relationships in biowaste-filled natural rubber: effects of particle size and ageing on mechanical and thermal performance	30
Thermal expansion predictions for graphene/short glass fiber/polymer hybrid nanocomposites using a two-phase micromechanical approach	30
Suspension polymerization for synthesis of new hypercrosslinked polymers nanoparticles for removal of copper ions from aqueous solutions	30
Antibacterial activity induction into superabsorbent hydrogel via Schiff-base-metal coordination modification	29
Advances in self-healing hydrogels to repair tissue defects	29
Immobilized on MgCl2 bis(phenoxy-imine) complexes of Ti and Zr as catalysts for preparing UHMWPE and ethylene/higher α-olefin copolymers	29
Carbon fiber-reinforced, activated carbon-embedded copper oxide nanoparticles/epoxy hybrid composites for EMI shielding in aircraft applications	29
Modulation of swelling of PVA hydrogel by polymer and crosslinking agent concentration	28
Synthesis, characterization and swelling behavior of pH-sensitive polyvinylalcohol grafted poly(acrylic acid-co-2-acrylamido-2-methylpropane sulfonic acid) hydrogels for protein delivery	28
Fabrication of multifunctional polypyrrole hydrogel enhanced by polyvinyl alcohol	28
Denim fabric-reinforced unsaturated polyester: effect of different fabrication methods on mechanical properties and water absorption properties	27
Influence of rice husk ash on the properties of dynamically cured ENR/TPS biocomposites	27
Screening of poly (butylene adipate-co-terephthalate) PBAT co-polyesters hydrolyzing bacteria from soil	27
Synthesis of Metal Organic Framework (MOF) based Ca-Alginate for adsorption of malachite green dye	27
A review on the limitations of natural fibres and natural fibre composites with emphasis on tensile strength using coir as a case study	27
A novel sustainable composite hydrogel containing nanocellulose to remove potentially toxic metals from contaminated water	27
Synthesis and characterization of block sulfonated amphiphilic aromatic copolyamides for cation conductive membranes	26
Investigation of crystal habit of N,N′-dicyclohexylterephthalamide and its influence on the crystallization behavior of isotactic polypropylene	26
Synthesis of SrAl2O4: Eu, DY @ polymer composite membrane using eugenol as a cross-linking agent to minimize nanoparticle agglomeration	26
Evaluation of block copolymer and homopolymer of stearyl methacrylate as multifunctional additives for lubricating oil	25
Preparation, characterization and application of the Pb-ion-imprinted polymers based on epoxy resin and polyamide-amine dendrimers	25
Poly(amidoamine)/cellulose based bio-composites as potential anticancer bio-compatible polymers	25
Biodegradability of renewable waterborne polyurethane modified with vinyl-grafted gelatin by UV curing	25
Optimization of hydrophobic nonresponsive sol-ketal acrylate gel film to hydrophilic thermo-responsive gel by graft-polymerization	25
Mechanical performance and fracture surface analysis of fatty acid-coated iron oxide-reinforced nitrile butadiene composites	25
Evaluation of the inhibitory effect of isopulegol (ISO) and its β-cyclodextrin inclusion complex (ISO/β-CD) on the reversal of Staphylococcus aureus efflux pump activity	24

Insights into current directions of protein and peptide-based hydrogel drug delivery systems for inflammation	24
Mechanical properties investigation on the effect of 3D cross-links on polymer matrix reinforced by glass fiber	24
Synthesis and characterization of starch-based hydrogels containing myrtus oil nanoemulsion for wound dressings	24
Development and characterization of SWCNT reinforced bio-epoxy (EcoPoxy) nanocomposites	24
Modifying polymeric membrane with expansible microgels containing silver nanoparticles: regulating the catalytic activity by forced convection in three-dimensional network	23
Recycling of poly-(methyl methacrylate) waste sheets to synthesize catalyst-free bi-functional cation-exchange resin for sequestering of toxic pollutant	23
Research progress on the ‘all-in-one’ photothermal platform prepared based on polydopamine for tumor synergy therapy	23
Creep lifetime of ethylene vinyl acetate co-polymer film after pre-load relaxation	23
Improving thermal stability of starches native cross-linked with citric acid as a compatibilizer for thermoplastic starch/polylactic acid blends	22
Effect of alkali treatment on tensile strength of epoxy composite reinforced with coir fiber	22
Use of graphene nanoparticles (GNP) in natural rubber and chlorobutyl rubber: study on GNP dispersion and interaction, curing characteristics, mechanical and barrier properties	22
Three dimensional scaffolds of hybrid PLA/PCL/HA/silica nanocomposites for bone tissue engineering	22
Effective removal of ionic dyes from aqueous media using modified karaya gum–PVA semi-interpenetrating network system	22
Evaluation of novel fluorescent 1,5-naphthalene-bis(allylcarbonate) monomer used in the formulation of dental composite resins	22
Synthesis of N-vinylcaprolactam and methacrylic acid based hydrogels and investigation of drug release characteristics	22
Impact of cross-linker types and concentrations on physical, mechanical, and barrier properties of collagen hydrolysate obtained from leather industry trimming wastes and sodium alginate-based films	22
Synthesized the cold-resistant plasticizer epoxidized 1,6-hexanediol oleate and effects on the properties of polyvinyl chloride	22
Preparation of sulfated/sulfonated castor oil through an eco-friendly process and its application in leather	22
Review of the sources, synthesis, and applications of nanocellulose materials	22
Pursuit of high-performance carbon capture membranes: fabrication of nickel oxide-doped polyethersulfone-based mixed matrix membranes	21
Functionalization of chitosan/alumina nanoparticles with carboxylic groups using phthalic anhydride for adsorption of methylene blue dye via response surface methodology	21
Synthesis, characterization, and fabrication of silver nanoparticles in 1-vinyl imidazole-based hydrogels and their use in olefin oxidation, hydrogen generation, and oxo-anion adsorption	21
Gelatin-based quaternary blended hydrogel film strengthened with SiO2 nanoparticles for biomedical applications	21
A perspective into ring-opening polymerization of ε-caprolactone and lactides: effect of, ligand, catalyst structure and system dynamics, on catalytic activity and polymer properties	21
Load bearing investigations on silane coupling grafted PET core and pineapple leaf fibre-vinyl ester sandwich composite building material	21
A recent development trend in microwave radiation-based material engineering	21
Effects of carbon nanotubes on structure, performance and properties of polymer nanocomposite membranes for water/wastewater treatment applications: a comprehensive review	21
Rate- and temperature-dependent ratcheting behavior of high-density polyethylene (HDPE) subjected to cyclic compression: testing and prediction	20
Structural properties of HPMC/PEG/CS thermosensitive porous hydrogels	20
Influence of hydrophobic association in the aqueous media on the rheology and polymer conformation of associative polymers	20
Effect of maleic anhydride and titanate coupling agent as additives on the properties of poly (butylene adipate-co-terephthalate)/thermoplastic starch films	20
Hyaluronic acid-PVA loaded with Ag3(PO4)/Sm2O3/CNT by film casting technique: morphology, mechanical, thermal stability, swelling, antibacterial, and cell viability	20
Fabrication and evaluation of novel sulfur/epoxy resin composites	20
Investigation of process parameters effect on wood-bioplastic nanocomposites behavior using Taguchi method	20
Rheological properties and ultra-high salt resistance of novel hydrophobically associating copolymers for fracturing fluids	20
Styrene-assisted acrylic acid grafting onto polypropylene surfaces: preparation, characterization, and an automatically latex-coagulating application	20
Core–shell nanofibers of poly (glycerol sebacate) and poly (1,8 octanediol citrate) for retinal regeneration	20
Synthesis, properties, environmental degradation, processing, and applications of Polylactic Acid (PLA): an overview	20
Removal of remazol black b, cationic brill red-x and acid erionyl yellow dyes from aqueous solutions using chitosan grafted copolymers	20
A green polymer biomaterial functionalized with waste coffee grounds for anti-hemolytic and antibacterial applications	19
Study of core shell structure and its effect on thermal, optical, electrical and magnetic properties of PPY-Ni0.5Co0.5Fe2O4 nanocomposites	19
Statistical elastic and fracture mechanical properties of quasi-brittle and ductile amorphous polymers	19
Poly(vinyl alcohol) membranes-inspired heterocyclic compounds for different applications: synthesis and characterization	19
Electrospun lavender essential oil-loaded polylactic acid nanofibrous mats for antioxidant applications	19
Antibacterial activity and volatile organic compounds sensing property of polypyrrole-coated cellulosic paper for food packaging purpose	19
Thermal, structural and morphological properties of polypropylene and high density polyethylene polymer composites filled with waste urea formaldehyde	19
A review of the application of polymeric materials in microbial fuel cells	19
Immobilization of Trametes versicolor laccase on polystyrene microspheres containing diazonium groups	19
Enhanced synergic effect of the antibacterial activity and hydrophobicity of polydimethylsiloxane polymer loaded with titanium dioxide nanoparticles and ciprofloxacin	19
Remote interaction effect of industrial ion exchangers on the electrochemical and sorption equilibrium in scandium sulfate solution	19
Application of effective cross-linked chitosan-based aerogel adsorbent for removal of ibuprofen from water	18
Blue light-emitting fluorene–dendron hybridized polymers: optophysical features	18
High-performance CO2 separation membranes: comparison of graphene oxide and carboxylated graphene oxide nanofillers	18
The relationship between the concentration of conjugated polymer of an aggregation status and absorbance of UV–Vis absorption spectra during the aggregation process of conjugated polymer solutions	18
Nanocomposites by in situ polymerization based on styrene-maleic anhydride copolymer and clay	18
Poly(2-ethyl hexyl acrylate-co-methyl allyl polyethylene glycols ether–co-acrylic acid) pressure-sensitive adhesives: synthesis, characterization, investigations of adhesive and thermal properties	18
Highly carbonized Prunus dulcis shell-derived activated carbon for high-performance supercapacitor applications	18
Influence of silane-treated lignin and Celosia argentea stem fiber on load bearing, tribology and flame retardant behavior of vinyl ester composites	18
Comparison of different methods for preparation of nanochitosan as anticancer agent	18
Monitoring of shear heating effects during injection molding of rubber to improve the process control	18
Designing of anti-corrosive poly (γ-glycidoxypropyltriethoxysilane)-coated aluminum alloy via electro-polymerization: effect of cerium nitrate concentration	18
Design, characterization and evaluation of gelatin/carboxymethyl cellulose hydrogels for effective delivery of ciprofloxacin	17
Polyurethane wool powder-coated cotton and polyester fabrics for flame retardant properties	17
In situ green synthesis of iron nanoparticles on PVA nanofiber and its application in adsorptive removal methylene blue	17
Characteristic properties of base coat of automobile paint: enhancement in scratch and abrasion resistance by nanoscale reinforcement—a review	17
Synthesis and characterization of gamma radiation-induced (3-acrylamidopropyl) trimethylammonium chloride-acrylic acid functional superabsorbent hydrogel	17
Modification of curing, morphological, mechanical and electrical properties of epoxidised natural rubber (ENR-25) through the addition of copper calcium titanium oxide (CCTO)	17
A new look at tensile yielding in isotactic polypropylene: role of strain rate and thermal softening	17
Biodegradation of PLA/CNC composite modified with non-ionic surfactants	17
Highly sensitive, stretchable, piezoresistive auxetic sensor based on graphite powders sandwiched between silicon rubber layers	17
Natural polymer-mediated synthesis of magnesium oxide nanoparticles and examination of their cytotoxicity and photocatalytic activity	17
Influence of nanomagnesium oxide fillers on tensile and impact strength of banana fibre-reinforced epoxy composites	17
Synthesis of block copolymer of vinyl acetate and methyl acrylate by cobalt-mediated radical polymerization in a packed column system: simultaneous control of molecular weight, separation, and purific	17
Effect of particle sizes on physical, thermal and mechanical behavior of a hybrid composite with polymer matrix with raffia vinifera cork and Bambusa vulgaris	17
Investigation of properties and applications of ZnO polymer nanocomposites	16
Fabrication of chitosan-based interpenetrating network hydrogel via sequential amino-maleimide click reaction and photopolymerization in water	16
Effect of alkaline treatment on the physical and mechanical properties of borassus flabellifer leaf fiber	16
Hydrophilic matrix system coated by polyvinyl acetate emulsion versus calcium alginate for sustained acetylsalicylic acid release	16
Layered Ag(I) coordination polymer: photocatalytic property and therapeutic effects on neonatal pneumonia	16
Epoxidation of oleic acid derived palm oil and subsequent ring opening by in situ hydrolysis	16

Super-flexible, moldable, injectable, self-healing PVA/B/CMC hydrogels synthesis and characterization, as potential water-retaining agent in agriculture	16
Recent developments of phosphorous–nitrogen-based effective intumescent flame-retardant for polymers and textiles	16
Mechanical properties, thermal behavior, miscibility and light stability of the poly(butylene adipate-co-terephthalate)/poly(propylene carbonate)/polylactide mulch films	16
Synthesis and storage stability investigation on curing agent microcapsules of imidazole derivatives with aqueous polyurethane as the shell	16
The effect of modified silica nanoparticles on the polycarbonate thin-film nanocomposite membranes in a submerged membrane system for the treatment of surface-contaminated water	16
Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers	16
A review on poly lactic acid (PLA) as a biodegradable polymer	16
Fabrication of PA6/MoS2 nanocomposites via melt blending of PA6 with PA6/PEG modified-MoS2 masterbatch	16
Synthesis of N-isopropyl acrylamide copolymerized acrylic acid caped with Dibenzo-18-crown-6 composite for selective separation of Co-60 radioisotope from radioactive liquid waste containing Cs-137	16
Preparation and evaluation of the antimicrobial activity of sodium alginate-grafted diphenylamine embedded with silver nanoparticles	16
Investigation of changes in the viscosity properties of acrylamide (co)polymer and their hydrolyzed forms depending on the conditions of their preparation	16
Effect of residue solvent in polybutylene-1 on the following phase transition after solvent vapor annealing for different time	16
Optimization of extraction techniques for processing and utilization of a new fiber from Cyperus Dichrostachus A. Rich plant	16
Hydrocolloid and water soluble polymers used in the food industry and their functional properties: a review	16
Review of advances in improving thermal, mechanical and electrochemical properties of polyaniline composite for supercapacitor application	16
Effect of biobased polymeric plasticizer on the properties of polylactic acid/polyhydroxybutyrate blends for biodegradable packaging	16
Effect of imine-containing phenolic hardeners with different chain lengths and epoxy functionalities on thermal, mechanical, and healing properties of bio-based epoxy vitrimers	15
Study on crystallization behavior of trans polyisoprene/polyethylene wax composite materials	15
Development and biological testing of Clerodendrum infortunatum impregnated electrospun scaffolds for tissue engineering applications	15
Modeling and optimization of piezoelectric and dielectric properties of poled PVDF/BT nanocomposites	15
High-density amine-functionalized MCM-41 derived from pumice: facile synthesis and antibiotic adsorption	15
PVDF-based (V2O5)x. (Mn0.4Fe2.6O4)(2−x), x = [0.2, 0.4, 0.6, 0.8, and 1] nanocomposites for tailoring the optical and nonlinear optical properties of PVDF	15
Investigation on the influence of PEG end groups on the ring-banded spherulite morphology of PEG/PLLA blends	15
Ductile polylactic acid/poly(butylene diglycolate): structures and properties	15
Selection of yarns for manufacturing handloom Varanasi brocade by using the AHP method	15
Preparation and properties of thermo-expandable microcapsules with anionic/nonionic waterborne polyurethane as the shell	15
Utilization of banana peel as bio-filler to develop bio-composite materials and characterize their physical, mechanical, thermal, and tribological characteristics	15
Development of bovine elastin/tannic acid bioactive conjugate: physicochemical, morphological, and wound healing properties	15
Recent development in the medical and industrial applications of gum karaya: a review	15
Advanced synthesis techniques and tailored properties of carbon nanotube reinforced polymer composites for high-performance applications	15
Preparation and characterization of a biopolymer modified by doping with metallic particles, application	15
An insight into Ziegler–Natta catalyst active site distribution for polyolefins: application of jitter differential evolution	15
Electrochemical synthesis of poly(6,7-diphenyl-4,9-di(selenophen-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline-co-3,3-didecyl-3,4-propylenedioxythiophene) and its electrochemical and optical characteriza	15
Hydrogel-based intelligent delivery system for controlled release of diloxanide furoate	15
Covalently bonded nanosilver-hydroxyethyl cellulose/polyacrylic acid/sorbitol hybrid matrix: thermal, morphological and antibacterial properties	15
A new approach for synthesis of cyclic poly(N-isopropylacrylamide), for applying in biomaterial applications	15
Non-traditional vegetable oil-based isocyanate-free polyurethane: a short review	15
Biosynthesis of surface-modified ZrO2 from Phyllanthus niruri extracts and mechanical, wear, dielectric, water absorption and thermal conductivity properties of PVA composites	15
Insights into anhydride-cured epoxy resin system using dynamic chemo-rheological modeling	15
The inclusion of graphene nanoplatelet on the mechanical, thermal, and electrical characteristics of polycarbonate	15
Effect of triple modification on structure and properties of sesbania gum	15
Synthesis and evaluation of a new three-metallic high-performance Ziegler–Natta catalyst for ethylene polymerization: experimental and computational studies	15
Cyclic voltammetry and XPS studies of poly (aniline-co-3-aminophenol)	15
Pullulan-based nanocomposite films with enhanced hydrophobicity and antibacterial performances	15
Polylactic acid/poly(butylene diglycolate-co-butylene terephthalate) blends with improved toughness	15
Biological applications of biogenic silk fibroin–chitosan blend zinc oxide nanoparticles	14
Toughening modification on self-reinforced composite of the rPET fibers/rPETG	14
A review on self-initiated and photoinitiator-free system for photopolymerization	14
In situ green synthesis of AgNPs in bacterial cellulose membranes and antibacterial properties of the composites against pathogenic bacteria	14
Polyaniline-decorated Macadamia nutshell composite: an adsorbent for the removal of highly toxic Cr(VI) and efficient catalytic activity of the spent adsorbent for reuse	14
Microstructure–properties relationship in ethylene-propylene diene monomer (EPDM)/nitrile butadiene rubber (NBR)/halloysite nanotubes (HNTs) nanocomposites	14
Influence of processing oil on properties of dynamically cured epoxidized natural rubber and thermoplastic polyurethane blends	14
Review on adsorptive removal of metal ions and dyes from wastewater using tamarind-based bio-composites	14
Synthesis and characterization of chemically functionalized novel and reusable D-mannitol xanthate derived hydrogel for capturing of toxic metal ions from aqueous solutions	14
Preparation of self-healable nanocomposite hydrogel based on Gum Arabic/gelatin and graphene oxide: study of drug delivery behavior	14
Enthalpy–entropy compensation and isoequilibrium relationship in thermo-chemical conversion of cigarette butt filters (CBFs) based on cellulose acetate (CA): causes and effects	14
Hydrogen bonding network formation in epoxidized natural rubber	14
Radiation synthesis and anticancer drug delivery of poly(acrylic acid/acrylamide) magnetite hydrogel	14
Dynamic mechanical properties of sugar palm fiber-reinforced polymer composites: a review	14
Evaluation of vulcanization systems in natural rubber elastomeric tire sidewall compositions with lignin as a stabilizing agent	14
Effect of polyvinyl alcohol on electrical, spectroscopic and thermal properties of gum acacia-based gel electrolytes containing NaOH	14
Hydrophobically modified carboxymethylcellulose: additive for aqueous drilling fluids under low and high temperature conditions	13
Biodegradable polyester-polybutylene succinate (PBS): a review	13
Exploration of cellular uptake and endocytosis mechanisms for doxorubicin-loaded poly (amino acid) nanocarriers	13
An electrochemiluminescence aptasensor based on poly(aniline-luminol)/graphene oxide/chitosan for ultra-sensitive detection of Hg2+	13
High dielectric PANI/PDMS all-organic composites fabricated by electric fields-assisted assembling	13
Antimicrobial composite materials from waste paper pulp, polyvinyl alcohol and aloe vera extract: sustainable footwear solutions	13
Preliminary in vitro hemocompatibility assessment of biopolymeric hydrogels for versatile biomedical applications	13
Fabrication and evaluation of pH-sensitive guar gum/chitosan/poly(vinyl alcohol) composite for improved gastro-retention of metformin	13
Activated porous carbon derived from ethynyl phenyl azo phenol-biphenylene resin for high-performance supercapacitor	13
Functionalized pristine barley grain (Hordeum vulgare L.)-based superabsorbent as methylene blue loading and delivery device for the potential treatment of methemoglobinemia	13
Improving of impact copolymer PP (ICP) blends properties via compounding	13
Influence of polyester dendrimers on swelling and adsorption of metal ion of PVA/PAA hydrogels	13
Retraction Note: Understanding mechanical characteristics of pH-responsive PEG 4000-based polymeric network for colorectal carcinoma: its acute oral toxicity study	13
Functionalized carboxymethyl cellulose/polyethyleneimine nanocomposite with silver nanoparticles for enhanced dye adsorption and antimicrobial properties	13
Synthesis, characterization, anticancer, and antioxidant activities of chitosan Schiff bases bearing quinolinone or pyranoquinolinone and their silver nanoparticles derivatives	13
Bio-based poly(butylene furandicarboxylate-co-butylene 2,5-thiophenedicarboxylate): synthesis, thermal properties, crystallization properties and mechanical properties	13
Amino-terminated hyperbranched poly(phenylene oxide) as a novel antioxidant for nitrile-butadiene rubber	13
The effect of activated carbon nanoparticles (ACNPs) on characterization and mechanical properties of polyethersulfone (PES) ultrafiltration membranes	13
Incapacitating the challenges of dye removal using polysulfone composite membrane with improved permeability and antifouling study	13
Metalloporphyrin-based Ni/Co metal–organic framework: preparation, characterization and photodegradation of 1,5-DHN	13
Modulation of starch-based film properties for potential application as coating systems	13
Unidirectional drug release controlled by a PLA/mesoporous bioactive glass/PVA polymer composite	13
New amphiphilic terpolymers of N-vinylpyrrolidone with poly(ethylene glycol) methyl ether methacrylate and triethylene glycol dimethacrylate as carriers of the hydrophobic fluorescent dye	13
Modification of silk fabrics with diallyldimethylammonium chloride	13
Preparation of non-toxic green slippery liquid infused surfaces based on electrospun fiber with anti-algae and anti-bacterial properties	12
Characterization of OSA starch-based films with nut-byproducts extracts for potential application as natural wound dressing	12
Dual-scale nanopillared polypropylene/graphene surfaces with droplet impact robustness	12
“Greener” homogeneous esterification of cellulose isolated from Stipa tenacissima plant located in the Eastern region of Morocco using ionic liquids as reaction medium	12
Synthesis and characterization of citric acid and itaconic acid-based two-pack polyurethane antimicrobial coatings	12
Preparation and characterization of polyethylene glycol/sodium alginate aerogel beads loaded with biogenic zinc oxide nanoparticles: potential therapeutic option for treating multidrug-resistant bacte	12
Chemical recycling of PET by catalyzed aminolysis and its application as a hardener for epoxy coating	12
Strength modification of sodium alginate–polyvinyl alcohol gel beads and efficient aqueous phase phosphorus removal	12
Effective removal of Pb(II) and Cu(II) from aqueous solutions using a hybrid composite of fuller's earth, aluminum silicate and chitosan	12
Synthesis of novel antibacterial grafted sodium alginate copolymer-based adsorbent for wastewater treatment	12