tm-Technisches Messen

Papers
(The median citation count of tm-Technisches Messen is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Development of a novel magnet system for a 1 kg Planck balance21
Prediction of water absorption of recycled coarse aggregate based on deep learning image segmentation18
Preprocessing method for robust topography reconstruction of surfaces of metal additive manufactured parts based on focus variation microscopy14
Monte Carlo Method for Uncertainty Estimations of Cyber-Physical Finite Element Sensor Networks12
A comparison of learning-based approaches for the corrosion detection on barrels in industrial applications9
Phased-Array basiertes Structural Health Monitoring zur Delaminationserkennung bei Mehrschichtsystemen8
Number of samples to use in estimating sinewave amplitude in the presence of noise7
Review and perspectives of the force-displacement measurement system with electromagnetic and electrostatic force compensation principles7
Enhancing Embedded Impedance Spectroscopy through Optimized Multisine Signal Design: Application to Li-ion batteries6
Kompakter interferometrischer Freistrahlsensor auf Basis der Range-Resolved Interferometry für rückführbare Längen- und Geschwindigkeitsmessungen6
Combination of generic novelty detection and supervised classification pipelines for industrial condition monitoring6
Investigation of cross-sensitivities of the potential drop method for structural health monitoring of civil structures6
Spectral analysis of malignant and healthy tissue based on hyperspectral image data6
Characterisation metrics for performance comparison of area scan and event-based sensors5
Frontmatter5
Design and performance analysis of a novel displacement-based temperature sensor5
Uncertainty evaluation using virtual experiments: bridging JCGM 101 and a Bayesian framework5
Themenheft Sensoren und Messsysteme 20245
Temperature-dependent calibration and temperature compensation of elastic shape-memory alloy strain sensors for fiber-reinforced composite applications5
Modular Direct Laser Writing setup for high precision nanostructuring5
Untersuchung der Blasendynamik von Flüssigkeitskavitation im Schmierfilm eines hydrodynamischen Gleitlagers5
Messunsicherheit einer Kalibriereinrichtung für Wärmestromsensoren – Unsicherheit der Temperaturdifferenz5
Frontmatter5
Anwendung einer Support Vector Machine zur Überwachung der Altsandregeneration mit EIS-Daten5
Ev2Gray: event-only intensity imaging – occlusion-referenced log-intensity reconstruction4
Bildbasierte Bestimmung der räumlichen und zeitlichen Verteilung des Brechungsindex während der Aushärtung von Polymeren in der additiven Fertigung von Optiken4
Frontmatter4
Measurement and advanced data post-processing of proton resonance frequency shift in 7 T MRI to obtain local temperature in a tissue-mimicking phantom4
Maschinenlesbares und maschineninterpretierbares digitales Kalibrierzertifikat (DCC) und sein Einsatz in der Praxis4
Table of Content/ Inhaltsverzeichnis4
Messunsicherheit geometrischer Prüfmerkmale – Automatisiert und praxisgerecht mit Koordinatenmessgeräten ermitteln4
Optimal aperture settings for generic camera calibration4
Frontmatter4
Self-powered synchronous asymmetric voltage flip and charge extraction technique for piezoelectric energy harvesting3
Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie3
Speckle shift tracking sensor for high accuracy 6-DoF pose measurements3
Ensemble-based uncertainty quantification of virtual measurements in multi-stage battery production in relation to measurement uncertainty3
Quantitative study of pipe stripe defects using rotating magnetic field MFL3
Phase-preserving methods to visualise ultrasonic fields with schlieren imaging3
A comparative study of Q-Seg, quantum-inspired techniques, and U-Net for crack image segmentation3
Multi-range voltage divider for wideband power measurements3
Systematische Simulationsmethode zur effizienten Abschätzung von Unsicherheiten komplexer Messungen – ein Zwischenweg von klassischem GUM und der Monte-Carlo Methode3
Laser Speckle Photometry for Inline Defect Detection in Solder Connections of Power Electronics3
Beschleunigungsmessung als Grundlage für die Strömungsverfolgung in Bioreaktoren mit Sensorpartikeln3
Radiation error of air temperature measurements: Minimization of the error by a new reference system and comparison with conventional measurement systems, diurnal and annual variation of their errors 3
Evaluation of digital models for dimensional X-ray computed tomography – analysis of a multi feature check measurement3
Robuste Ampeldetektion und Haltelinienfreigabe durch HD-Karten Assoziation3
Eine mathematische Beschreibung der Flankengeometrie geradverzahnter Kronenräder3
Piezoresistive and plasmonic sensors utilizing the swelling of hydrogels3
Studying the effects of siloxane poisoning on a SnO2 metal oxide semiconductor gas sensor in temperature cycled operation enabling self-monitoring and self-compensation3
Kalibrierung und Messunsicherheitsbetrachtung eines medizinischen Bohrers mit integrierter Temperatursensorik zur Minimierung des Patientenrisikos bei minimalinvasiven Bohrungen an der lateralen Schäd3
ÖTZI – ein gewichtiger Mann: Feuchtetechnische Aspekte der Konservierung der Eismann-Mumie3
On-site contactless visualization of the laminar-turbulent flow transition dynamics on wind turbines2
Titelei2
Explainable AI for sensor-based sorting systems2
Frontmatter2
Impurity measurements in hydrogen using laser spectroscopy: carbon monoxide as a case study2
Quantentechnologie und Quantensensorik: Aktuelle Themen der Technologieentwicklung und Transfer in die Anwendung aus Sicht eines nationalen Metrologieinstituts2
Integrating energy data from a lambda architecture into a Digital Twin2
Frontmatter2
Special Issue: Sensoren und Messtechnik für die Energiewende2
Charakterisierung eines parallelkinematisch aktuierten In-situ-Referenzmesssystems für 5D-Nanomess- und Fabrikationsanwendungen2
Verbesserung des Kontrast-Rausch-Verhältnisses bei Optical Gas Imaging mit Differenzbild-Methoden2
Tagung Messunsicherheit Erfurt 20212
Uncertainty-aware automated machine learning toolbox2
Laser-Doppler- und Hitzdraht-Anemometrie-Messungen entlang V-förmiger angehobener Rippen in einem quadratischen Kanal2
Concept studies and application development of textile integrated dielectric elastomer sensors for smart shoe technologies2
Luftgestützte Ferndetektion von Propan und Methan2
Electrochemical in vivo oxygen sensing on cochlear implants2
Frontmatter2
Prozessmesstechnik und Präzisionsmesstechnik2
On the Detection of Propofol in Exhaled Air by MOS Gas Sensors2
Investigations on terthiophene as an electrically conductive polymer for UV laser lithography2
Frontmatter2
Metrologisches Kompetenzzentrum für Windenergie2
Methoden zur Ultraschallortung von mobilen Sensoren innerhalb eines flüssigen Mediums zur Maximierung einer aktiven lokalen Energiebereitstellung mittels akustischer Fokussierung2
Analysis of a capacitance tomography system for object detection and localization2
Expected value of the root mean square of sinefitting residuals in the presence of phase noise or sampling jitter2
Estimation of pothole structural parameters using depth data under oblique observation2
Ein Bottom-up Ansatz für die Radius- und Rundheitsmessung von Mikrokugeln2
A novel type coordinate measuring machine head2
Kalibriereinrichtung für dünne Platten-Wärmestromsensoren2
The influence of workpiece surface texture on visual measurement of roughness2
Milestones of measurement technology research – past, present, and future2
Analysis on the effects of hypo-attenuated leaflet thickening on the hemodynamics of transcatheter aortic valve prostheses by means of particle image velocimetry2
Measurement and application of wearable inertial measurement unit systems in athlete kinematics and load monitoring2
Concept and realization of a modular and versatile platform for metal oxide semiconductor gas sensors2
Frontmatter2
Specklebasierte Charakterisierung anisotroper Oberflächen2
Strömungscharakterisierung im Arbeitsspalt beim magnetfeldüberlagerten elektrochemischen Abtragen2
The global dimension of the energy transition2
Diffraction-based dual path multispectral imaging2
Einfluss von Datenqualität, Domain Shift und Messunsicherheit auf die Vorhersagequalität smarter Sensorsysteme2
Das Kompetenzzentrum für Windenergie (CCW) an der PTB2
Spectral reconstruction using neural networks in filter-array-based chip-size spectrometers2
Analytical validation of mobile gait measurement systems for sports rehabilitation: sensors, reference methods, and performance metrics2
Mit Intelligenz von der Messung zur Information – VDI-Zukunftsforum in Ettlingen –2
Spatial detection and localisation of multiple laser beams in optical measuring systems2
Orientation resolved measurements of accelerations with sensor particles in bioreactors2
Frontmatter1
Developing a measurement setup and investigating impact-induced wave propagation in glassfiber-reinforced plastic using acceleration sensors1
Algorithmic assessment of drag on thermally cut sheet metal edges1
Complex measurements through multimode fibers exploiting intelligent photonics: merging of physics and deep learning1
Der Einfluss der Messunsicherheit in der Materialprüfung – Von der Messmittelauswahl zur Konformitätsaussage am Beispiel des Zugversuchs bei erhöhter Temperatur nach DIN EN ISO 6892-2:2018-091
Quantifizierung der Klassifikationsleistung von Oberflächeninspektionssystemen in der Flachstahlproduktion1
Machine learning approach for impedance locus uncertainties1
Gesture and force sensing based on dielectric elastomers for intelligent gloves in the digital production1
15th Sensor-Symposium Dresden1
Inhaltsverzeichnis1
Entwicklung von Mikrointerferometern mit Faserkopplung1
Verbesserte luftakustische Diagnose von Druckluftleckage mithilfe merkmalsbasierter maschineller Lernverfahren1
High-resolution coherence scanning immersion interferometry for characterization of technical surface topographies1
Design der 5 MN·m Drehmoment-Normalmesseinrichtung1
Comparison of full fiber coupled interferometer systems under vacuum conditions1
Edge width and edge gradient: influence on accuracy when measuring areas in lossily compressed images1
Metrology on flying platforms1
Linearity test of triangular waveform generators1
Force-displacement measurement system with electromagnetic and electrostatic force compensation principles1
Einsatz von orthogonalen Codes zur Mehrquellen-Richtungsschätzung mit dünn besetzten Mikrofonanordnungen1
Metrology for sensor networks: metrological traceability and measurement uncertainties for air quality monitoring1
Measurement uncertainty of spectral mismatch correction factors in photometry1
Das Virtuelle Koordinatenmessgerät – ein Digitaler Metrologischer Zwilling1
Erprobung einer miniaturisierten Infrarotspektroskopie zur Messung von Alterungseffekten in Öl1
Active control of refractive index of air for improving the performance of optical systems1
Impact of aberrations in SLM-based far-field holography1
Frontmatter1
Study on influencing factors and regularity analysis of eddy current method applied to detection of reinforcement corrosion1
Minimal-invasive faseroptische Endomikroskopie für die Medizin1
Ein Beitrag zur Temperaturpräzisionsmessung durch Drifterkennung an Platin-100-Messwiderständen in Dünnschichttechnologie1
Inductive coupled-coils angle encoders with improved performance and linearity1
XXXVII. Messtechnisches Symposium 20231
Quality analysis for condition monitoring of a manufacturing process integrating acoustic processing based on three distinct ML algorithms1
Untersuchung der dynamischen Beanspruchung bionischer Leichtbauverzahnungen mittels DMS1
Analysis of thrombosis risk of commissural misaligned transcatheter aortic valve prostheses using particle image velocimetry1
Verzahnungsmetrologie für Windenergieanlagen1
Fortschritte der magnetometrischen Durchflussmessung: Grundsatznachweis der Fließgeschwindigkeitsmessung und Einfluss des Strömungsprofils auf die RF-Pulseffizienz1
Impedimetrischer Inline-Biofilmsensor1
Luftgekoppelter Ultraschall für die Prüfung des Alterungszustandes von Klebeverbindungen1
A comparative study of classification methods for state recognition in injection molding1
Imaging the mechanical properties of nanowire arrays1
Dienstleistungen der Wasserstoff-Metrologie1
Radon sensor networks for large buildings: balancing the trade-off between energy efficiency and health1
The SCALEX facility – an apparatus for scaled fluid dynamical experiments1
Phononic Crystal Based Approach for Heterogeneous Liquids Manipulation and Detection1
Fault diagnosis using signal processing and deep learning-based image pattern recognition1
Proof of concept and new developments on a Kibble extension1
Design methodology and uncertainty estimation of a wireless sensor network for surface strain and shape measurements1
Image Processing Forum – Forum Bildverarbeitung 20241
Sensitivity analysis of piezoelectric material parameters using Sobol indices1
Perspectives on AI-driven systems for multiple sensor data fusion1
Frontmatter1
Nanoscopy on composite materials with thin photochromic layers1
Data-driven modeling in metrology – A short introduction, current developments and future perspectives1
Frontmatter1
Frontmatter1
Investigations on anelastic effects in electrical discharge machined titan grade 2 flexures for the use in precision force instruments1
Bioanalytical sensors using the heat-transfer method HTM and related techniques1
Electron capture detector based on X-ray ionization1
Indirect optical geometry measurements for optically uncooperative measurement objects1
Kontaktlose induktive Strömungstomografie in grundlegender und angewandter Fluiddynamik1
Entwicklung eines nephrologisch optischen Messverfahrens zur Bestimmung von Partikelkonzentrationen in Gasen und Flüssigkeiten hinter lichtstreuenden Kunststoffwandungen1
Using micro spheres as reference artifacts for the in-situ characterization of tactile 3D micro probes along the probing sphere’s equator1
Unsicherheit der Oberflächentemperaturmessung in Koordinatenmessgeräten1
Temperature and pressure effects on the response behavior of anemometers1
Task-specific scan trajectory modification for dimensional X-ray computed Tomography with high throughput1
In-situ laser reduced LrGO-SnO2 chemoresistive sensor for highly selective and room-temperature isoprene detection1
Optische Messung der Werkzeugablenkung in der inkrementellen Blechumformung1
Pressure measurement stocking for prevention and therapy support for diabetic foot ulcers1
Entwicklung eines digitalen Prüfberichts für additiv gefertigte Bauteile1
Impedance spectroscopy of enlarged cochlear implant stimulation electrodes – FEM simulations considering the perilymph1
Windkanalmesseinrichtung für das bistatische PTB-Wind-Lidar1
XXXVI. Messtechnisches Symposium des AHMT in Magdeburg1
Frontmatter1
Detection of microplastics in water using electrical impedance spectroscopy and support vector machines1
Development of an automated mechanical testbed for efficient experiments on smart composites1
40 Jahre Arbeitskreis der Hochschullehrer für Messtechnik e. V. (AHMT)1
Research on precision linear displacement measurement method based on closed loop phase-shift control of single alternating light field1
Textile-based strain sensors for fiber-reinforced composites under tension, compression and bending1
Frontmatter1
Die Bestimmung viskoelastischer Materialparameter von Polymeren mittels eines Puls-Echo-Messverfahrens0
Bestimmung der Messunsicherheit bei der Kalibrierung von Widerstandsthermometern im Vergleichsverfahren gemäß DKD-R 5-1:20230
Assessment of Bluetooth Low Energy Mesh for long range sensor data transmission and distance measurements0
Frontmatter0
Concept of a microfluidic detection system for trace analysis of micropollutants in wastewater0
In-Field Dynamic Performance Optimization of Sensory Readout Electronics with Self-X Properties using Low Cost and Power-Efficient Indirect Measurement Method0
Computational fluid dynamics analysis and experimental study of artificially ventilated temperature sensors for meteorological observations0
The digital transformation of the quality infrastructure supports the energy transition0
Geometric parameters in the measurement of magnetic properties using toroidal specimen0
Optimierung optischer Absolutdrehwinkelmessungen durch verbesserte Codierungen0
Unsicherheit der elektrischen Impedanzspektroskopie bei Schüttgütern0
From marker features to multimodal fusion: a review of vision-based tactile sensor design and development0
Surface mortar detection and performance evaluation of recycled aggregates based on hyperspectral technology0
Resolution enhancement and edge ringing suppression in digital holography using speckle illumination0
Measurement setup for characterization of inductive rotary position sensors0
Test of conformance or non-conformance with geometrical specifications0
Grundlagen der Gasfeuchte Teil 2 (Kenngrößen der Gasfeuchte)0
Frontmatter0
Fully automated calibration of an eddy current sensor for high-precision feedback in pick-and-place applications using bioinspired dry adhesives0
Frontmatter0
16th Dresden Sensor Symposium0
Comparison of two 3D calibration methods for thermal imaging cameras to track bat flight paths near wind turbines0
Measurement uncertainty, data quality and data-driven modelling0
Demonstrator für zyklische Probennahme und schnelle Gaschromatografie in der Kunststoffaufbereitung0
6. Workshop ,,Messtechnische Anwendungen von Ultraschall“ vom 17. bis 19. Juni 2024 im Kloster Drübeck0
Temperaturkompensation des Potentialsondenverfahrens für die Zustandsüberwachung von Baustrukturen0
Optimizing speed and quality in rendering of sensor-realistic images0
Frontmatter0
Metrological traceability in particle measurements for national periodic technical inspections: uncertainty and influencing variables0
Das Coulometrische Prinzip als Grundlage eines Spurenfeuchtegenerators0
Titelei0
Automated end-of-line quality assurance with visual inspection and convolutional neural networks0
Untersuchung der piezoresistiven Eigenschaften in carbonfaserverstärkten Elektroden von dielektrischen Elastomeraktoren0
Evaluation of turbulence parameters with a multipoint Laser Doppler Vibrometer0
Acoustic condition monitoring of milling tools using the Rayleigh-Ritz autoencoder0
Analysis and development of a sensor concept for multistable actuators with passive magnetic shape memory alloy0
The hunt for mineral resources with quantum magnetometers0
Eigenschaften und spezielle Phänomene von Dehnungssensoren aus Kohlenstoffpartikel-Elastomerverbunden0
Pyrolysebasierte elektrochemische Gassensoren zum Spurennachweis von toxischen Phosgenfolgeprodukten in Raumluft0
Rückführung dimensioneller Messungen an Großbauteilen für Windenergiesysteme0
Experimental method for investigating the formation of flow patterns in a very wide gap Taylor-Couette flow (η = 0.1).0
Frontmatter0
Monitoring functionality and positioning of cochlear implants by impedance spectroscopy and  in silico modelling0
Editorial zum Themenheft Luftfeuchte0
Berechnung und Nutzung von Unsicherheiten zertifizierter Werte von Referenzmaterialien0
Machine learning-based prediction of remaining useful lifetime for solder joints based on real mission profile data0
Measuring the frequency response of an optical microphone system with a fiber based setup0
The harmonization of digital calibration certificates as a key for automated metrological traceability0
Progressing TDLAS instrumentation for SI-traceable measurements of nitrous oxide in maritime applications0
Heat meter performance downstream of bends and the asymmetric swirl generator0
Miniaturisierung von labelfreier Oberflächenanalytik mittels Whispering Gallery Modes0
The three-dimensional transfer function in surface topography measurement by coherence scanning interferometry0
Influence of lossy JPEG compression on measurement uncertainty for luminance-based area measurements0
Flow monitoring in a bubble column reactor by Distributed Acoustic Sensing0
Frontmatter0
Overcoming low-frequency non-stationarity in battery impedance spectroscopy through optimized multisine excitation0
Three-dimensional finite element analysis and research of leakage magnetic field of flake, pit, through-hole defect in petroleum pipelines0
Advances in indirect optical geometry measurement0
Corneal-glint-based estimation of the binocular point of gaze without worn sensors0
Analysis of electrical resistance tomography measurements for fast force localization0
Roboterunterstützte in situ optische Messmethode zur Verschleißmessung an Wendeschneidplatten0
Vereinfachtes Verfahren zur Ermittlung von Messunsicherheiten zur Bestimmung der Messprozesseignung industrieller Prüfprozesse0
Diametrical optical coherence tomography for extended depth measurement range0
Frontmatter0
Einflussgrößen auf die Bestimmung dynamischer Kennwerte von Thermometern in thermischen Energiemessgeräten0
Frontmatter0
2D image-based electrical contact surface degradation and its health assessment0
Eichung im Wandel – Veränderungen bei gesetzlich geregelten Messgeräten0
Themenheft Sensoren und Messsystem 20220
XXXVIII. Messtechnisches Symposium des AHMT in Hall in Tirol0
DynH 2 O: Aufbau zur metrologischen Charakterisierung der dynamischen Eigenschaften von Hyg0
0.20549583435059