Engineering With Computers

Article	Citations
Fast descriptor-based 2D and 3D microstructure reconstruction using the Portilla–Simoncelli algorithm	461
Interactive PDE patch-based surface modeling from vertex-frames	118
A novel enriched degree of freedom method for absorbing boundary conditions in the time-domain finite element method	77
Direct coupling of dual-horizon peridynamics with finite elements for irregular discretization without an overlap zone	74
A cyclical fast iterative method for simulating reentries in cardiac electrophysiology using an eikonal-based model	65
Retraction Note: Optimization of residential building envelopes using an improved Emperor Penguin Optimizer	59
Concentric tube robot: a real-time static model considering friction	51
Lagrangian particle-based simulation of waves: a comparison of SPH and PFEM approaches	50
Comprehensive multi-material topology optimization for stress-driven design with refined volume constraint subjected to harmonic force excitation	50
Data assimilation for real-time subsurface flow modeling with dynamically adaptive meshless node adjustments	47
Vibration analysis of functionally graded sandwich porous plates with arbitrary boundary conditions: a new general viscoelastic Winkler–Pasternak foundation approach	44
Elite-driven surrogate-assisted CMA-ES algorithm by improved lower confidence bound method	44
Correction and addendum to: IGA approximations of elastic interfaces and their defects in an elastic medium with couple stress	41
A novel method for improving the accuracy of MR-derived patient-specific vascular models using X-ray angiography	41
Solving acoustic scattering problems by the isogeometric boundary element method	40
The novel learning solutions to nonlinear differential models on a semi-infinite domain	38
KANtrol: a physics-informed Kolmogorov–Arnold network framework for solving multi-dimensional and fractional optimal control problems	36
3D isogeometric indirect BEM solution based on virtual surface sources on the boundaries of Helmholtz acoustic problems	35
Cheap-expensive multi-objective Bayesian optimization for permanent magnet synchronous motor design	34
FPGA-orthopoly: a hardware implementation of orthogonal polynomials	33
Local tangential lifting virtual element method for the diffusion–reaction equation on the non-flat Voronoi discretized surface	33
Dual-variable-horizon peridynamics and continuum mechanics coupling modeling and adaptive fracture simulation in porous materials	32
Voroto: multiscale topology optimization of voronoi structures using surrogate neural networks	31
Numerical simulation of spatio-temporal spread of an infectious disease utilizing a collocation method based on local radial basis functions	31
Interval sequential optimization and time-variant reliability assessment (ISOTRA) framework for dynamic stress-constrained topology design	31

Reducing spatial discretization error on coarse CFD simulations using an openFOAM-embedded deep learning framework	30
Special issue on recent advances in meshfree and particle methods	30
Correction to: Generic volume transfer for distributed mesh dynamic repartitioning	29
Micro-plasma actuator mechanisms in interaction with fluid flow for wind energy applications: operational parameters	29
Stability and dynamic behavior of porous FGM beam: influence of graded porosity, graphene platelets, and axially varying loads	29
Simulating the aftermath of Northern European Enclosure Dam (NEED) break and flooding of European coast	28
Hierarchical radial basis functions method for the coupling of Stokes and Darcy flow	28
A second-order space-time accurate scheme for Maxwell’s equations in a Cole–Cole dispersive medium	27
Correction to: A discrete element framework for the numerical analysis of particle bed-based additive manufacturing processes	27
Adaptive multi-domain physics-informed neural networks for coupled thermo-mechanical analysis of thermal barrier coatings	26
Concepts of data collection for the CAD-integrated isogeometric analysis	26
Near-boundary error reduction with an optimized weighted Dirichlet–Neumann boundary condition for stochastic PDE-based Gaussian random field generators	26
The simplest node-based equilibrium finite element for 2D Poisson equation with exploration of the equivalence among hybrid, flux-based and stress-function-based equilibrium elements	26
Towards a comprehensive damage identification of structures through populations of competing models	25
Minimizing thermally induced residual stresses in metal additive manufacturing through peridynamics topology optimization	25
Peridynamic modeling of dual-phase-lag thermal-moisture coupling in a finite element framework	24
Nonlinear forced vibrations of three-phase nanocomposite shells considering matrix rheological behavior and nano-fiber waviness	24
Finite element implementation of ordinary state-based peridynamics with variable horizon	24
An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks	24
Modified strain gradient analysis of the functionally graded triply periodic minimal surface microplate using isogeometric approach	23
Human-augmented topology optimization design with multi-framework intervention	23
A double-loop Kriging model algorithm combined with importance sampling for time-dependent reliability analysis	23
A novel enhanced global exploration whale optimization algorithm based on Lévy flights and judgment mechanism for global continuous optimization problems	23
A GPU-accelerated simulator for the DEM analysis of granular systems composed of clump-shaped elements	23
Worst case mesh quality in the target matrix optimization paradigm	22
Hygrothermal vibration of a cross-ply composite plate with magnetostrictive layers, viscoelastic faces, and a homogeneous core	22
Generative inverse design of multimodal resonant structures for locally resonant metamaterials	22
The 30th anniversary of the UK Association for Computational Mechanics	21
Adaptive density-based robust topology optimization under uncertain loads using parallel computing	21
Two-phase elastic axisymmetric nanoplates	21
A fourth-order compact difference method for the nonlinear time-fractional fourth-order reaction–diffusion equation	21
Optimized differential evolution algorithm for solving DEM material calibration problem	21
A finite element based approach for nonlocal stress analysis for multi-phase materials and composites	21
Foretelling microstructural interface with multi-generational convolutional-LSTM framework	21
Modified nonlocal couple stress isogeometric approach for bending and free vibration analysis of functionally graded nanoplates	20
A numerical approach for optimization of the working fluid of a standing-wave thermo-acoustic refrigerator	20
Accurate computation of partial volumes in 3D peridynamics	20
Modelling of viscoelastic materials using non-ordinary state-based peridynamics	20
Topology optimization of multi-phase shell-infill composite structure for additive manufacturing	20
A novel meshfree radial point interpolation method with discrete shear gap for nonlinear static analysis of functionally graded plates	20
Evaluating the effect of a ducted winglet on the induced drag of wind turbine blade using CFD and Trefftz plane analysis	19
Retraction Note to: Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM	19
Neural networks vs. splines: advances in numerical extruder design	19
A waveguide port boundary condition based on approximation space restriction for finite element analysis	19
A novel meshless method based on the virtual construction of node control domains for porous flow problems	19
A unified scheme for nonlinear dynamic direct time integration methods: a comparative study on the application of multi-point methods	19
Special issue: Numerical simulation for additive manufacturing processes and products	19
Scalable field-aligned reparameterization for trimmed NURBS	18
An efficient automatic mesh generation algorithm for planar isogeometric analysis using high-order rational Bézier triangles	18
A novel topology framework for simultaneous topology, size and shape optimization of trusses under static, free vibration and transient behavior	18

A discontinuous piecewise polynomial generalized moving least squares scheme for robust finite element analysis on arbitrary grids	18
A parallel acceleration GPU algorithm for large deformation of thin shell structures based on peridynamics	18
Structural analysis of nonlocal nanobeam via FEM using equivalent nonlocal differential model	18
On the use of elliptic PDEs for the parameterisation of planar multipatch domains	18
Toward engineering lattice structures with the material point method (MPM)	18
Automatic unstructured mesh generation approach for simulation of electronic packaging system	18
Transformations of computational meshes	17
A robust methodology for dataset preparation and algorithm performance assessment in machine learning prediction of the fatigue life of additive manufactured components	17
A physics preserving neural network based approach for constitutive modeling of isotropic fibrous materials	17
An efficient method for estimating failure possibility function by combining adaptive Kriging model with augmented fuzzy simulation	17
Parametric model order reduction by machine learning for fluid–structure interaction analysis	17
Elite dominance scheme ingrained adaptive salp swarm algorithm: a comprehensive study	17
Leveraging code generation for transparent immersogeometric fluid–structure interaction analysis on deforming domains	17
Corner error reduction by Chebyshev transformed orthogonal grid	17
The generation of tetrahedral meshes for NURBS-enhanced FEM	16
Magneto-thermoelastic behaviour of a finite viscoelastic rotating rod by incorporating Eringen’s theory and heat equation including Caputo–Fabrizio fractional derivative	16
GMR-Net: GCN-based mesh refinement framework for elliptic PDE problems	16
A hybrid approach for interval prediction of concrete dam displacements under uncertain conditions	16
Combined phase-field and cohesive zone modeling for mixed-mode fracture in polymer composites	16
A novel analytical model of particle size distributions in granular materials	15
An optimization-driven design framework for inertance-integrated hydraulic shock absorbers: incorporating nonlinear and parasitic effects	15
Coupling of bond-based peridynamics and continuous density-based topology optimization methods for effective design of three-dimensional structures with discontinuities	15
Data-driven modeling of the mechanical behavior of anisotropic soft biological tissue	15
Reliability index based strategy for the probability-damage approach in fail-safe design optimization (β-PDFSO)	15
Multi-fidelity reduced-order model for GPU-enabled microfluidic concentration gradient design	15
Inverse design optimization framework via a two-step deep learning approach: application to a wind turbine airfoil	15
Radial basis function interpolation of fields resulting from nonlinear simulations	15
Buckling analysis of functionally graded sandwich thin plates using a meshfree Hermite Radial Point Interpolation Method	15
Quadrature-free immersed isogeometric analysis	14
Space–time enriched finite elements for elastodynamic wave propagation	14
Sonics: develop intuition on biomechanical systems through interactive error controlled simulations	14
Hollow structural topology optimization considering geometrical nonlinearity using three-dimensional moving morphable bars	14
Multistage physics informed neural network for solving coupled multiphysics problems in material degradation and fluid dynamics	14
A multi-subnets physics-informed neural network (Ms-PINN) model for transient heat transfer analysis in materials with heterogeneous microstructures	14
Free vibration analysis of nanoplates with auxetic honeycomb core using a new third-order finite element method and nonlocal elasticity theory	14
Support vector machines-based pre-calculation error for structural reliability analysis	14
Fractal–fractional dynamical system of Typhoid disease including protection from infection	14
The development of an ALE finite element and discontinuous Galerkin method for the non-isothermal non-Newtonian FSI problem	13
Multiphysics modeling of 3D traction force microscopy with application to cancer cell-induced degradation of the extracellular matrix	13
Automatically imposing boundary conditions for boundary value problems by unified physics-informed neural network	13
An efficient meshless method to approximate semi-linear stochastic evolution equations	13
Study of steady two-dimensional advection–diffusion equation with stratification using second-kind shifted Chebyshev polynomials	13
From CAD to representations suitable for isogeometric analysis: a complete pipeline	13
A neural network approach for solving nonlinear differential equations of Lane–Emden type	13
Peridynamic computational homogenization theory for materials with evolving microstructure and damage	13
Locally refined quad meshing for linear elasticity problems based on convolutional neural networks	12
Computational modeling of quasi static fracture using the nonlocal operator method and explicit phase field model	12
An evolutionary-based polynomial regression modeling approach to predicting discharge flow rate under sheet piles	12
Speculative anisotropic mesh adaptation on shared memory for CFD applications	12
Nonlocal strain gradient analysis of FG GPLRC nanoscale plates based on isogeometric approach	12
Couple stress-based moving Kriging meshfree shell model for nonlinear free oscillations of random checkerboard reinforced microshells	12
Deep learning-based semi-supervised approach for high-quality 2D quadrilateral mesh deformation	12
The optimal multi-degree reduction of Ball Bézier curves using an improved squirrel search algorithm	12
Stable quadratic generalized IsoGeometric analysis for elliptic interface problem	12
Development of an equation-based parallelization method for multiphase particle-in-cell simulations	12
Multithreaded runtime framework for parallel and adaptive applications	12
Probabilistic CFD computations of the NASA low-speed centrifugal compressor (LSCC) under uncertain operational conditions	11
Space-time hp-finite elements for heat evolution in laser powder bed fusion additive manufacturing	11
General resource manager for computationally demanding scientific software (MARE)	11
A robust game optimization for electromagnetic buffer under parameters uncertainty	11
qRLS: quantum relaxation for linear systems in finite element analysis	11
Parameterization, algorithmic modeling, and fluid–structure interaction analysis for generative design of transcatheter aortic valves	11
Unraveling the complexities of a highly heterogeneous aquifer under convergent radial flow conditions	11
A size-dependent isogeometric approach for vibration analysis of FG piezoelectric porous microplates using modified strain gradient theory	11
Nodal force distribution of moments on arbitrarily shaped geometries without multi-point constraints	11
An ANN-assisted efficient enriched finite element method via the selective enrichment of moment fitting	11
Seventeen criteria for evaluating Jacobian-based optimization metrics	11
Finite element formulation of metal foam microbeams via modified strain gradient theory	11
GAS-AU: an average uncertainty-based general adaptive sampling approach	11
Vibrational behavior of truncated conical porous GPL-reinforced sandwich micro/nano-shells	11
MPIPN: a multi physics-informed PointNet for solving parametric acoustic-structure systems	11
A ready-to-manufacture optimization design of 3D chiral auxetics for additive manufacturing	11
Higher-order block-structured hex meshing of tubular structures	10
Small/large amplitude vibration, snap-through and nonlinear thermo-mechanical instability of temperature-dependent FG porous circular nanoplates	10
Size-dependent analysis of functionally graded carbon nanotube-reinforced composite nanoshells with double curvature based on nonlocal strain gradient theory	10
Smart laminates with an auxetic ply rested on visco-Pasternak medium: Active control of the system’s oscillation	10
Physical modeling of conjugate heat transfer for multiregion and multiphase systems with the Volume-of-Fluid method	10
A computational homogenization framework for non-ordinary state-based peridynamics	10
Peridynamics for out-of-plane damage analysis of composite laminates	10
Digital twin based lifecycle modeling and state evaluation of cable-stayed bridges	10

The Radial Point Interpolation Method combined with a bi-directional structural topology optimization algorithm	10
Approximate symbolic solutions to differential equations using a novel combination of Monte Carlo tree search and physics-informed neural networks approach	10
Cut-PFEM: a Particle Finite Element Method using unfitted boundary meshes	10
Thermal–mechanical metamaterial analysis and optimization using an Abaqus plugin	10
Capturing the nonlocal effect using a novel hybrid 8-node plate element based on the Hellinger–Reissner variational principle	10
An isogeometric FSDT approach for the study of nonlinear vibrations in truncated viscoelastic conical shells	10
Spatial arc spline approximants with fewest arcs and their smooth representations by low-degree splines	10
Multi-scale topology optimization using neural networks	10
Improved gradual change-based Harris Hawks optimization for real-world engineering design problems	10
Novel approaches for hyper-parameter tuning of physics-informed Gaussian processes: application to parametric PDEs	10
A novel conjoined space–time formulation for explicit analyses of dynamic models	9
Hybrid mesh generation for the thin shell of thin-shell plastic parts for mold flow analysis	9
Automatic decomposition of protrusion volumes on thin-shell models for hexahedral mesh generation	9
Parameterization-based neural network: predicting non-linear stress–strain response of composites	9
THB-Diff: a GPU-accelerated differentiable programming framework for THB-splines	9
A nonlocal strain gradient analysis of laminated composites and sandwich nanoplates using meshfree approach	9
A deep autoencoder based approach for the inverse design of an acoustic-absorber	9
Free vibration analysis of free-form stiffened shells based on isogeometric method	9
High order numerical method for the simulation of Rayleigh–Stokes problem for a heated generalized second grade fluid with fractional derivative on regular and irregular domains	9
Helmholtz-x : Parallelized adjoint open source solver for the thermoacoustic Helmholtz equation	9
Homogenization of the elastic-viscoplastic damage behavior of asphalt mixtures based on the mesomechanical Mori–Tanaka method	9
Topology optimization of thick–thin plate structures considering local stress constraints	9
Optimal design of truss structures with frequency constraints: a comparative study of DE, IDE, LSHADE, and CMAES algorithms	9
Mechanical analysis of heterogeneous materials with higher-order parameters	9
Uncertainty analysis in acoustics: perturbation methods and isogeometric boundary element methods	9
Topology optimization for transient thermoelastic structures under time-dependent loads	9
Local vs. nonlocal integral elasticity-based phase field models including surface tension and simulations of single and two variant martensitic transformations and twinning	9
Nonlocal modeling of bi-material and modulus graded plates using peridynamic differential operator	9
A PDROD model of reinforced concrete based on peridynamics and rod elements	9