Computational Mechanics

Article	Citations
Correction: An isogeometric finite element formulation for frictionless contact of Cosserat rods with unconstrained directors	135
Space–time flow computation with boundary layer and contact representation: a 10-year history	102
An efficient and accurate parameter identification scheme for inverse Helmholtz problems using SLICM	70
Improved hyper-reduction approach for the forced vibration analysis of rotating components	56
A new unified arc-length method for damage mechanics problems	55
Fast and multiscale formation of isogeometric matrices of microstructured geometric models	53
A multiphysical computational model of myocardial growth adopted to human pathological ventricular remodelling	46
A contact method for B-spline material point method with application in impact and penetration problems	45
Reduced representations of assumed fields for Hu–Washizu solid-shell element	44
Thermodynamics-informed graph neural networks for real-time simulation of digital human twins	39
High-resolution Space–Time Isogeometric Analysis of NREL 5MW wind turbine long-wake flow	38
Phase-field modelling and analysis of rate-dependent fracture phenomena at finite deformation	38
Non-negative moment fitting quadrature for cut finite elements and cells undergoing large deformations	37
Numerical simulation of time-dependent behaviors of self-healing hydrogels based on a generalized recursive algorithm	35
Comment on “Free surface tension in incompressible smoothed particle hydrodynamics (ISPH)” [Comput. Mech. 2020, 65, 487–502]	32
Elastoplastic analysis of shells without any local iterative calculations by block Newton method	31
A continuous model for the simulation of manufacturing swarm robotics	31
A micromechanical finite element model for predicting the fatigue life of heterogenous adhesives	31
A numerical study on the visco-plastic regularization of a rate-independent strain gradient crystal plasticity formulation	30
Deltahedral self-stabilized virtual elements for 3D linear elastostatics problems	27
A large deformation isogeometric continuum shell formulation incorporating finite strain elastoplasticity	26
Computational homogenization for aerogel-like polydisperse open-porous materials using neural network-based surrogate models on the microscale	24
Unstructured surface mesh smoothing method based on deep reinforcement learning	24
Parameter identification and uncertainty propagation of hydrogel coupled diffusion-deformation using POD-based reduced-order modeling	24
A reparameterization-invariant Bayesian framework for uncertainty estimation and calibration of simple materials	23

An arc-length control technique for solving quasi-static fracture problems with phase field models and a staggered scheme	22
Phase transition in porous materials: effects of material parameters and deformation regime on mass conservativity	22
A general framework of high-performance machine learning algorithms: application in structural mechanics	22
Ensemble wavelet-learning approach for predicting the effective mechanical properties of concrete composite materials	21
Hybrid-Trefftz displacement elements for three-dimensional elastodynamics	21
Cohesive zone modeling of crack propagation, branching, and coalescence in multiphase composites	21
Correction to: Computationally efficient stress reconstruction from full-field strain measurements	20
An eigenvalue stabilization technique to increase the robustness of the finite cell method for finite strain problems	20
Space-fractional finite element method for scale sensitive truss structures: theory and implementation	20
A finite strain elastoplastic model based on Flory’s decomposition and 3D FEM applications	20
On the stability of POD basis interpolation on Grassmann manifolds for parametric model order reduction	20
Nonuniform torsion analysis in tapered composite bars by including higher-order warping modes	19
Raster approach to modelling the failure of arbitrarily inclined interfaces with structured meshes	18
An accelerated phase field model for fatigue fracture in elastoplastic solids	18
Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method	18
Correction to: Space–time isogeometric analysis of tire aerodynamics with complex tread pattern, road contact, and tire deformation	18
A novel node-to-segment algorithm in smoothed finite element method for contact problems	18
A meshfree orthotropic laminated shell model for geometrically nonlinear static and dynamic analysis	18
Bi-fidelity modeling of uncertain and partially unknown systems using DeepONets	18
First order finite element formulations for third medium contact	17
A space-time formulation for time-dependent behaviors at small or finite strains	17
Introduction of pseudo-stress for local residual and algebraic derivation of consistent tangent in elastoplasticity	17
Hybrid thermal modeling of additive manufacturing processes using physics-informed neural networks for temperature prediction and parameter identification	17
An ALE approach for large-deformation thermoplasticity with application to friction welding	17
Error estimates and physics informed augmentation of neural networks for thermally coupled incompressible Navier Stokes equations	17
Monolithic parallel overlapping Schwarz methods in fully-coupled nonlinear chemo-mechanics problems	17
A simple geometrically exact finite element for thin shells: part 2—dynamics	17
An improved formulation for reduced quadrature in computational solid mechanics	17
A generic formulation of anisotropic thermo-elastoviscoplasticity at finite deformations for finite element codes	17
A novel smoothed particle hydrodynamics method for multi-physics simulation of laser powder bed fusion	16
Improving the accuracy of the Newmark method through backward error analysis	16
Dynamic brittle fracture with a new energy limiter-based scalar damage model	16
Correction to: Computationally efficient stress reconstruction from full-field strain measurements	16
The comparison of two-dimensional and three-dimensional electro-magneto-thermo-mechanical analysis for the electromagnetic launch rail structure	16
Physics-informed neural network estimation of material properties in soft tissue nonlinear biomechanical models	15
Geometrically nonlinear analysis utilizing co-rotational framework for solid element based on modified Hellinger-Reissner principle	15
Consistent coupling of positions and rotations for embedding 1D Cosserat beams into 3D solid volumes	15
Correction to: A damage phase-field model for fractional viscoelastic materials in finite strain	15
Buckling design optimization of tow-steered composite panels and cylindrical shells considering aleatory and epistemic uncertainties	15
Master–slave elimination scheme for arbitrary smooth nonlinear multi-point constraints	15
A length insensitive modified phase field model for quasi-brittle failure and brittle fracture	15
Correction: An asynchronous parallel high-throughput model calibration framework for crystal plasticity finite element constitutive models	15
Physically enhanced training for modeling rate-independent plasticity with feedforward neural networks	15
An adaptive model order reduction technique for parameter-dependent modular structures	14
Virtual element method with adaptive refinement for problems of two-dimensional complex topology models from an engineering perspective	14
Graph-enhanced deep material network: multiscale materials modeling with microstructural informatics	14
A mixed-order quasicontinuum approach for beam-based architected materials with application to fracture	14
A machine learning-based multiscale modeling for analyzing gadolinia-doped ceria fracture behavior under mechano-electrochemical coupling fields	14
Finite elements of multiscale mixtures (FE2M) in three dimensions: theory, numerical implementation, and analyses	14
A voxel-based machine-learning digital-oven-twin for precise cooking	14

A generalised multi-scale Peridynamics–DEM framework and its application to rigid–soft particle mixtures	14
Numerical simulation of the extrusion and layer deposition processes in 3D concrete printing with the Particle Finite Element Method	13
Modeling and simulation of chemo-elasto-plastically coupled battery active particles	13
An efficient procedure for concrete fracture analysis based on mesh refinement ergodicity	13
A FEM cluster-based basis reduction method for shakedown analysis of heterogeneous materials	13
Finite strain poro-hyperelasticity: an asymptotic multi-scale ALE-FSI approach supported by ANNs	13
A biologically-inspired mesh moving method for cyclic motions mesh fatigue	13
A Bayesian regularization network approach to thermal distortion control in 3D printing	13
Image-based inverse characterization of in-situ microscopic composite properties	13
Collective compression of VACNT arrays modelled as nominally vertical, mutually interacting beams	13
A fully implicit and thermodynamically consistent finite element framework for bone remodeling simulations	12
A contact aware regularization technique for shape optimization	12
Contact modeling using step boundary method for immersed boundary finite element method	12
Memory repositioning in soil plasticity models used in contact problems	12
A nonlocal kernel-based continuum damage model for compaction band formation in porous sedimentary rock	12
A pruning algorithm preserving modeling capabilities for polycrystalline data	12
A machine-learning aided multiscale homogenization model for crystal plasticity: application for face-centered cubic single crystals	12
Cut spectral BFS plate element with Lobatto basis for wave propagation analysis	11
Efficient stochastic finite element analysis of irregular wall structures with inelastic random field properties over manifold	11
A Sylvester equation approach for the computation of zero-group-velocity points in waveguides	11
Parallel algorithm for particle-grid dual discretization	11
Benchmarking physics-informed frameworks for data-driven hyperelasticity	11
Consistent pressure Poisson splitting methods for incompressible multi-phase flows: eliminating numerical boundary layers and inf-sup compatibility restrictions	11
Reproducing kernel enhanced material point method with improved artificial viscosity formulations for shock wave and vortical compressible flows	11
Accelerating aeroelastic UVLM simulations by inexact Newton algorithms	11
Numerical treatment of a static thermo-electro-elastic contact problem with friction	11
Locking treatment of penalty-based gradient-enhanced damage formulation for failure of compressible and nearly incompressible hyperelastic materials	11
Design of experiments for the calibration of history-dependent models via deep reinforcement learning and an enhanced Kalman filter	10
Signed distance field framework for unified DEM modeling of granular media with arbitrary particle shapes	10
On efficient numerical integration for peridynamic modeling	10
An isoparametric tangled finite element method for handling higher-order elements with negative Jacobian	10
Efficient and accurate analysis of locally resonant acoustic metamaterial plates using computational homogenization	10
Plane crack problems within strain gradient elasticity and mixed finite element implementation	10
An image-based meso-scale model for the hygro-mechanical time-dependent analysis of concrete	10
A shakedown oriented topology optimization algorithm utilizing second-order cone programming (SOCP) and its application in spacecraft structure design	10
One-point quadrature of higher-order finite and virtual elements in nonlinear analysis	10
Numerical modeling of hypervelocity impacts on carbon fiber reinforced plastics using a GPU-accelerated SPH model	10
A phase-field approach for modeling plastic hinges in Euler–Bernoulli beams	10
Space–time collocation meshfree method for modeling 3D wave propagation problems	10
Construction of A-stable explicit last-stage diagonal implicit Runge–Kutta (ELDIRK) methods	10
A Hu-Washizu variational approach to self-stabilized quadrilateral Virtual Elements: 2D linear elastodynamics	9
Adaptive spatiotemporal dimension reduction in concurrent multiscale damage analysis	9
A 2-dimentional contact analysis using second-order virtual element method	9
Optimizing machine learning yield functions using query-by-committee for support vector classification with a dynamic stopping criterion	9
Accelerating full waveform inversion by transfer learning	9
A multi-point synergistic gradient evolution method for topology optimization leveraging neural network with applications in converged and diverse designs	9
Shape optimization of a linearly elastic rolling structure under unilateral contact using Nitsche’s method and cut finite elements	9
The concept of Representative Crack Elements (RCE) for phase-field fracture: transient thermo-mechanics	9
Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations	9
A 3D corotational curved beam element formulated on SE(3) group for geometrically nonlinear static and dynamic analysis	9
Virtual elements for sound propagation in complex poroelastic media	9
A comparative study of enriched computational homogenization schemes applied to two-dimensional pattern-transforming elastomeric mechanical metamaterials	9
Semi-reduced order stochastic finite element methods for solving contact problems with uncertainties	9
Virtual clustering analysis for long fiber reinforced composites	9
T-splines computational membrane–cable structural mechanics with continuity and smoothness: I. Method and implementation	9
Modelling of the electrical-magnetic-thermal-mechanical coupling behavior for the coil-structure electromagnetic launch	8
MRF-PINN: a multi-receptive-field convolutional physics-informed neural network for solving partial differential equations	8
Derivation of third order Runge–Kutta methods (ELDIRK) by embedding of lower order implicit time integration schemes for local and global error estimation	8
Mixed-formulation with non-penetration constraint for planar composite beams in partial interaction	8
Thermal modeling and uncertainty quantification of tool for automated garment assembly	8
Incompressible rubber thermoelasticity: a neural network approach	8
Microstructure evolution accounting for crystal plasticity in the context of the multiphase-field method	8
A modified cap plasticity description coupled with a localizing gradient-enhanced approach for concrete failure modeling	8
Microstructurally-informed stochastic inhomogeneity of material properties and material symmetries in 3D-printed 316 L stainless steel	8
Robust mixed FE for analyses of higher-order electromechanical coupling in piezoelectric solids	8
Phase-field approach to evolution and interaction of twins in single crystal magnesium	8
Three-dimensional approximated isogeometric analysis via Bernstein–Bézier tetrahedron	8
Microplasticity in polycrystalline materials from thermal cycling	8
Dynamic analysis of flexoelectric systems in the frequency domain with isogeometric analysis	8
Crack nucleation in heterogeneous bars: h- and p-FEM of a phase field model	8
Simulation of melt pool dynamics including vaporization using the particle finite element method	8
Frequency convergence characteristics of lumped mass Galerkin meshfree methods	8
A mixed-order interpolation solid element for efficient arterial wall simulations	8
A discontinuous Galerkin/cohesive zone model approach for the computational modeling of fracture in geometrically exact slender beams	8
Interpolation-based immersogeometric analysis methods for multi-material and multi-physics problems	8
Non-incremental response evaluation in geometrically nonlinear structural dynamics using a space-time stiffness operator	8
Correction to: A theoretical proof of the invalidity of dynamic relaxation arc-length method for snap-back problems	8
A gradient-enhanced bone remodelling approach to avoid the checkerboard phenomenon	8
A FETI B-differentiable equation method for elastic frictional contact problem with nonconforming mesh	8
A hybrid lattice Boltzmann-molecular dynamics-immersed boundary method model for the simulation of composite foams	8

Model-free data-driven identification algorithm enhanced by local manifold learning	8
HHT-$$\alpha $$ and TR-BDF2 schemes for dynamic contact problems	8
Numerical simulation of metal sheet damage under high-speed tangential airflow and laser irradiation	7
Finite element methodology for modeling aircraft aerodynamics: development, simulation, and validation	7
Peridynamic Galerkin method: an attractive alternative to finite elements	7
Novel $$H^\textrm{dev}(\textrm{Curl})$$-conforming elements on regular triangulations and Clough–Tocher splits for the planar relaxed micromorphic model	7
FFT-based homogenisation for efficient concurrent multiscale modelling of thin plate structures	7
A generalized Bayesian regularization network approach on characterization of geometric defects in lattice structures for topology optimization in preliminary design of 3D printing	7
How drugs modulate the performance of the human heart	7
High-throughput computational homogenization of porous materials produced by selective laser sintering: a diffuse-interface–based workflow	7
A wave-based model reduction approach for dynamic analysis of bladed disks	7
A new homogenization scheme for beam and plate structures without a priori requirements on boundary conditions	7
A three-dimensional prediction method of stiffness properties of composites based on deep learning	7
Iterative PGD model reduction for the strongly-coupled thermomechanical analysis of crack propagation in power electronic modules	7
Updating an uncertain and expensive computational model in structural dynamics based on one single target FRF using a probabilistic learning tool	7
An introduction to kernel and operator learning methods for homogenization by self-consistent clustering analysis	7
A finite element implementation of finite deformation surface and bulk poroelasticity	7
Recurrent and convolutional neural networks in structural dynamics: a modified attention steered encoder–decoder architecture versus LSTM versus GRU versus TCN topologies to predict the response of sh	7
Optimal design of 3D architected porous/nonporous microstructures of multifunctional multiphase composites for maximized thermomechanical properties	7
h-Adaptive radial basis function finite difference method for linear elasticity problems	7
A theoretical analysis of mass scaling techniques	6
Numerical upscaling of parametric microstructures in a possibilistic uncertainty framework with tensor trains	6
A generalised path-following solver for robust analysis of material failure	6
Variational multiscale computational fluid–structure interaction analysis of Wells turbine passive-adaptive blades	6
A mixed u–p edge-based smoothed particle finite element formulation for viscous flow simulations	6
Accelerating the distance-minimizing method for data-driven elasticity with adaptive hyperparameters	6
Correction to: Fuzzy forward dynamics of distinct gait phases with a prosthetic foot	6
Predicting smooth body flow separation with finite-element-based variational multiscale formulation	6
A novel inherent strain method for predicting residual stresses and deformations in metal additive manufacturing	6
Transient computational homogenisation of one-dimensional periodic microstructures	6
A comparative review of peridynamics and phase-field models for engineering fracture mechanics	6
Stable node-based smoothed finite element method for 3D contact problems	6
An electromechanically coupled beam model for dielectric elastomer actuators	6
Micro-mechanical numerical analysis on ductile damage in multiaxially loaded anisotropic metals	6
A nonlocal gradient damage model with energy limiter for dynamic brittle fracture	6
Efficient prediction of static and dynamical responses of functional graded beams using sparse multiscale patches	6
A maximum-entropy length-orientation closure for short-fiber reinforced composites	6
Space-time energetic Galerkin BEM for the numerical solution of 3D elastodynamic problems: overcoming challenges of the strongly singular integral operator	5
Vanquishing volumetric locking in quadratic NURBS-based discretizations of nearly-incompressible linear elasticity: CAS elements	5
A fully non-invasive hybrid IGA/FEM scheme for the analysis of localized non-linear phenomena	5
Robust hybrid/mixed finite elements for rubber-like materials under severe compression	5
On differences and comparisons of peridynamic differential operators and nonlocal differential operators	5
A cell-based smoothed finite element method with a distributed area regularization technique for 2D small displacement contact problems	5
An efficient adjoint symplectic subspace iteration method for modal analysis of multistage cyclic structure with gyroscopic effect	5
Multi-hierarchical surrogate learning for explicit structural dynamical systems using graph convolutional neural networks	5
A gaussian process framework for solving forward and inverse problems involving nonlinear partial differential equations	5
Surrogate modeling by multifidelity cokriging for the ductile failure of random microstructures	5
Enriched virtual elements for plane elasticity with corner singularities	5
Comparison of arterial wall models in fluid–structure interaction simulations	5
A new crack-tip element for the logarithmic stress-singularity of Mode-III cracks in spring interfaces	5
A Bayesian multiscale CNN framework to predict local stress fields in structures with microscale features	5
An ultra-high-speed reproducing kernel particle method	5
Multiscale thermoelastic modelling of composite strands using the “fundamental solutions” method	5
An efficient parameterized local reduced order model for Drucker-Prager plasticity	5
Higher-order accurate mass lumping for explicit isogeometric methods based on approximate dual basis functions	5
Heat transfer finite element model for laser powder-bed fusion on consolidated simulation geometry	5
Investigating shock wave propagation, evolution, and anisotropy using a moving window concurrent atomistic–continuum framework	5
Physics-informed data-driven discovery of constitutive models with application to strain-rate-sensitive soft materials	5
Model-order reduction framework for non-linear dynamics problems involving multiple non-parametrised loading configurations for damage assessment	5
A variational framework for the efficient simulation of fatigue	5
A comparative analysis of continuum plasticity, viscoplasticity and phase-field models for earthquake sequence modeling	5
Efficient acoustic topology optimization with the Multifrequency Quasi-Static Ritz vector (MQSRV) method	5
An efficient algorithm for rigid/deformable contact interaction based on the dual mortar method	5
Model and mesh selection from a mCRE functional in the context of parameter identification with full-field measurements	5
Phase field modelling and simulation of damage occurring in human vertebra after screws fixation procedure	5
Enforcement of non-conforming dirichlet boundary conditions in the implicit material point method using the direct elimination method	5
Field-enriched finite element method for simulating of three-dimensional crack propagation	5
Knowledge-based modeling of simulation behavior for Bayesian optimization	5
Unstructured moving least squares material point methods: a stable kernel approach with continuous gradient reconstruction on general unstructured tessellations	5
A damage phase-field model for fractional viscoelastic materials in finite strain	5
Correction to: Variationally consistent homogenization of diffusion in particle composites with material interfaces using dual macroscale chemical potentials	5
Coupling 2D continuum and beam elements: a mixed formulation for avoiding spurious stresses	5
An isogeometric analysis framework for ventricular cardiac mechanics	5
A numerical framework based on localizing gradient damage methodology for high cycle fatigue crack growth simulations	5
Numerical experiment based on non-linear micropolar finite element to study micro-rotations generated by the non-symmetric Maxwell stress tensor	5
An enhanced semi-explicit particle finite element method for incompressible flows	5
Temporal hierarchical modal neural network for structural strain prediction	5
Size-effects of metamaterial beams subjected to pure bending: on boundary conditions and parameter identification in the relaxed micromorphic model	4
Efficient implementation on accuracy improvement of the two-dimensional node-to-segment contact approach for explicit dynamic analysis	4
Three-dimensional plasticity-based topology optimization with smoothed finite element analysis	4
An optimality criteria method hybridized with dual programming for topology optimization under multiple constraints by moving asymptotes approximation	4
On the performance of domain decomposition methods for modeling heterogenous materials	4
A second-order strain gradient fracture model for the brittle materials with micro-cracks by a multiscale asymptotic homogenization	4
A unifying finite strain modeling framework for anisotropic mixed-mode fracture in soft materials	4
Clustering-enhanced Lattice discrete particle modeling for quasi-brittle fracture and fragmentation analysis	4
Lagrange and $$H({\text {curl}},{{\mathcal {B}}})$$ based finite element formulations for the relaxed micromorphic model	4
Comparison of elements and state-variable transfer methods for quasi-incompressible material behaviour in the particle finite element method	4
Boolean finite cell method for multi-material problems including local enrichment of the Ansatz space	4
Code verification of immersed boundary techniques using the method of manufactured solutions	4
High-resolution multi-domain space–time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation	4
Democratizing biomedical simulation through automated model discovery and a universal material subroutine	4
Mesoscale study on fracture mechanisms of NdFeB: polycrystalline phase-field modeling framework and simulation	4
An interface-enriched generalized finite element formulation for locking-free coupling of non-conforming discretizations and contact	4
Rapid estimation of viral emission source location via genetic algorithm	4
Data-driven synchronization-avoiding algorithms in the explicit distributed structural analysis of soft tissue	4