Journal of disPersion Science and Technology

Article	Citations
Sono-assisted enhanced adsorption of eriochrome Black-T dye onto a novel polymeric nanocomposite: kinetic, isotherm, and response surface methodology optimization	52
Enhanced adsorptive removal of toxic anionic dye by novel magnetic polymeric nanocomposite: optimization of process parameters	50
Enhanced adsorptive removal of crystal violet dye from aqueous media using citric acid modified red-seaweed: experimental study combined with RSM process optimization	38
Evaluation of the efficiency of magnetized clinoptilolite zeolite with Fe3O4 nanoparticles on the removal of basic violet 16 (BV16) dye from aqueous solutions	36
Darcy–Forchheimer higher-order slip flow of Eyring–Powell nanofluid with nonlinear thermal radiation and bioconvection phenomenon	33
Low-cost adsorbents for environmental pollution control: a concise systematic review from the prospective of principles, mechanism and their applications	33
Foam forming of fiber products: a review	27
Performance of acid mine drainage sludge as an innovative catalytic oxidation source for treating vehicle-washing wastewater	27
High-strength, anti-fatigue, stretchable self-healing polyvinyl alcohol hydrogel based on borate bonds and hydrogen bonds	24
A review of nanomaterials as viscosity reducer for heavy oil	23
Cellulose nanocrystals from blueberry pruning residues isolated by ionic liquids and TEMPO-oxidation combined with mechanical disintegration	23
Investigation on photocatalytic degradation of crystal violet dye using bismuth ferrite nanoparticles	22
A review of demulsification technique and mechanism for emulsion liquid membrane applications	22
Review on nanoparticle-surfactant nanofluids: formula fabrication and applications in enhanced oil recovery	19
Aloe-vera leaf extract as a green agent for the synthesis of CuO nanoparticles inactivating bacterial pathogens and dye	19
Interaction of sodium alginate with cetyltrimethylammonium bromide in aqua-organic mixed solvents: influence of temperatures and compositions	19
Mathematical modeling of multiphase flows of third-grade fluid with lubrication effects through an inclined channel: analytical treatment	19
The effect of MWCNTs/GNs hybrid addition on the tribological and rheological properties of lubricating engine oil	18
Batch adsorption isotherm models applied in single and multicomponent adsorption systems – a review	17
Removal of anionic dyes from aqueous media by using a novel high positively charged hydrogel with high capacity	16
Dynamics of MHD tangent hyperbolic nanofluid with prescribed thermal conditions, random motion and thermo-migration of nanoparticles	16
Fabrication of MgFe 2 O 4 /polyaniline nanocomposite for amputation of methyl red dye from water: Isotherm modeling, kinetic and c	16
The synthesis and enhanced photocatalytic activity of heterostructure BiOCl/TiO2 nanofibers composite for tetracycline degradation in visible light	15
Franz diffusion cell and its implication in skin permeation studies	15
Synthesis of activated carbon from walnut wood and magnetized with cobalt ferrite (CoFe2O4) and its application in removal of cephalexin from aqueous solutions	15

Anionic congo red dye removal from aqueous medium using Turkey tail (Trametes versicolor) fungal biomass: adsorption kinetics, isotherms, thermodynamics, reusability, and characterization	14
Direct fabrication of electrospun branched nanofibers with tiny diameters for oil absorption	14
Excellent biosorption performance of novel alginate-based hydrogel beads crosslinked by lanthanum(III) for anionic azo-dyes from water	14
Fabrication of superhydrophobic surfaces with Cassie-Baxter state	14
The effect of copper oxide nanoparticle additives on the rheological and tribological properties of engine oil	14
Numerical study on an electroosmotic micromixer with rhombic structure	14
Investigation of novel sorafenib tosylate loaded biomaterial based nano-cochleates dispersion system for treatment of hepatocellular carcinoma	13
Surface activity, salt and pH tolerance, and wettability of novel nonionic fluorinated surfactants with a short fluorocarbon chain	13
Microemulsion and microemulsion gel formulation for transdermal delivery of rutin: Optimization, in-vitro/ex-vivo evaluation and SPF determination	12
Highly selective and sensitive colorimetric detection of arsenic(III) in aqueous solution using green synthesized unmodified gold nanoparticles	12
Ammonium based deep eutectic solvents (DESs) on extraction of benzothiophene from iso-octane: experiment and COSMO-RS model	12
Formulation of a stable biocosmetic nanoemulsion using a Bacillus lipopeptide as the green-emulsifier for skin-care applications	11
Preparation and evaluation of polymeric additives based on poly(styrene-co-acrylic acid) as pour point depressant for crude oil	11
Effect of annealing processing on morphology, spectroscopy studies, Urbach disordering energy, and WDD dispersion parameters in Cu-Al doped zinc oxide films	11
Comparative solubilization of reactive dyes in single and mixed surfactants	11
Synthesis and crystal growth of cadmium naphthoate crystal for second order non-linear optics and cytotoxic activity	11
Micellar-enhanced ultrafiltration (MEUF) for removal of rhodamine B (RhB) from aqueous system	11
Selective separation of V(IV) from its solutions using modified cellulose	11
A novel technique of fabrication of nanoparticle acrylate doped polymer dispersed liquid crystal (PDLC) film	11
Corrosion inhibition of aluminum in sodium hydroxide solutions using some inorganic anions	11
Surface topology, optical spectroscopic and electrical studies on boron subphthalocyanine chloride thin films	10
Facile fabrication of versatile superhydrophobic coating for efficient oil/water separation	10
Phytosomal gel of Manjistha extract (MJE) formulated and optimized with central composite design of Quality by Design (QbD)	10
Conventional and advanced treatment technologies for palm oil mill effluents: a systematic literature review	10
Efficient preparation of phosphazene chitosan derivatives and its applications for the adsorption of molybdenum from spent hydrodesulfurization catalyst	10
A deeper insight into the characteristics of double-layer oil-in-water emulsions stabilized by Persian gum and whey protein isolate	10
Removal of aqueous Cr(VI) using magnetic-gelatin supported on Brassica-straw biochar	10
Poly(3-thienylboronic acid) coated magnetic nanoparticles as a magnetic solid-phase adsorbent for extraction of methamphetamine from urine samples	10
Underlying mechanisms of shale wettability alteration by low salinity water injection (LSWI)	10
Characterization of soluble and insoluble fractions obtained from a commercial pea protein isolate	10
Green synthesis of Fe/Cu oxides composite particles stabilized by pine needle extract and investigation of their adsorption activity for norfloxacin and ofloxacin	10
Nanoemulsion-based patch for the dermal delivery of ascorbic acid	10
Construction of direct Z-scheme AgIO4/TiO2 heterojunctions for exceptional photodegradation of rhodamine B dye	9
Reactive separation of malic acid from aqueous solutions and modeling by artificial neural network (ANN) and response surface methodology (RSM)	9
Adsorption of Mn+7 ions on chitosan/cellulose composite: experimentally and theoretically approaches	9
Experimental investigation on heat transfer parameters of an automotive car radiator using graphene/water-ethylene glycol coolant	9
Functional and physical properties of oil-in-water emulsion based on sodium caseinate, beef rumen and sunflower oil and its effect on nutritional quality of forcemeat	9
Adsorptive exclusion of crystal violet dye from wastewater by using fish scales as an adsorbent	9
Novel magnetic gel composite based on sodium alginate crosslinked by Yttrium(III) as biosorbent for efficient removal of direct dyes from aqueous solution	9
Multifunctional alginate-based carbon aerogels for oil–water mixture and emulsion separation	9
Mechanisms of nanofluid based modification MoS2 nanosheet for enhanced oil recovery in terms of interfacial tension, wettability alteration and emulsion stability	9
Effect of cobalt oxide nanoparticles on dielectric properties of a nematic liquid crystal material	9
Dispersion of graphene oxide and its application prospect in cement-based materials: a review	8
Investigation on the effects of cationic surface active ionic liquid/anionic surfactant mixtures on the interfacial tension of water/crude oil system and their application in enhancing crude oil recov	8
Effect of nanoparticle modified polyacrylamide on wax deposition, crystallization and flow behavior of light and heavy crude oils	8
Ibuprofen uptake through dimethyl ethylenediamine modified MOF: optimization of the adsorption process by response surface methodology technique	8
Experimental and theoretical investigation of pyrazinecarboxamide against mild steel corrosion	8
Synthesis and characterization of zinc-aluminum based layered double hydroxide and oxide nanomaterials by performing different experimental parameters	8
Innovation and improvement in food fortification: Microencapsulation of vitamin B2 and B3 by a spray-drying method and evaluation of the simulated release profiles	8
Process evaluation study on the removal of Ni(II) and Cu(II) ions from an industrial paint effluent using kola nut pod as an adsorbent	8

Removal of oil from synthetic heavy crude oil-in-water emulsions by the association of glass raschig rings and ultrasound	8
Removal of tartrazine, ponceau 4R and patent blue V hazardous food dyes from aqueous solutions with ZnAl-LDH/PVA nanocomposite	8
Synthesize and characterize of Fe3O4/zeolite 4A magnetic nanocomposite	8
Solubilization of direct black 2 in mixed micellar media: insights from spectroscopic and conductometric measurements	8
Superparamagnetic polyacrylamide/magnetite composite gels	8
Effect of different nanofluids on performance analysis of flat plate solar collector	8
Facile preparation and characterization of NiO/Ni2O3-decorated nanoballs and mixed phase CdS nano rods (CdS&NiO/Ni2O3) for effective photocatalytic deco	8
Chicken feathers derived materials for the removal of chromium from aqueous solutions: kinetics, isotherms, thermodynamics and regeneration studies	7
Synthesis of polyaspartic acid-oxidized starch copolymer and evaluation of its inhibition performance and dispersion capacity	7
Toward the formulation of bio-cosmetic nanoemulsions: from plant-derived to microbial-derived ingredients	7
Optimization of ultrasound-assisted microemulsions of citral using biopolymers: characterization and antifungal activity	7
Preparation, characterization, optimization, and antibacterial evaluation of nano-emulsion incorporating essential oil extracted from Teucrium polium L	7
Preparation, characterization and adsorption characteristics of diatom-based Cd(II) surface ion-imprinted polymer	7
Preparation of CO2 responsive nanocellulose gel for mobility control in enhanced oil recovery	7
Surfactants versus surface functionalization to improve the stability of graphene nanofluids	7
Formulation of roselle extract water-in-oil nanoemulsion for controlled pulmonary delivery	7
Preparation and functionalization of zinc oxide nanoparticles with polymer microgels for potential catalytic applications	7
Competitive adsorption of Ni(II) and Cu(II) ions from aqueous solution by vermiculite-alginate composite: batch and fixed-bed column studies	7
Preparation and evaluation of polymer-encapsulated UV filter nanocapsules with miniemulsion polymerization	7
Functional and structural properties of gum arabic complexes with casein and hydrolyzed casein achieved by Maillard reaction	7
Preparation and evaluation of new liquid crystal compounds as flow improvers for waxy crude oil	7
Multi-molecular mixed polymer flooding for heavy oil recovery	7
Which is better? Experimental and simulation analyses of the chemical modification of carbon nanotubes to improve their dispersion in water	7
Mesoscopic simulation on the microemulsion system stabilized by bola surfactant	7
Evidence of selective asphaltene subfraction adsorption on SiO2 nanoparticles studied by UV-vis absorbance and fluorescence spectroscopy	7
Efficient decolorization of cationic dye (malachite green) by natural-based biosorbent (nano-magnetic Sophora Japonica fruit seed biochar)	7
Numerical investigations of a passive micromixer with tree shape obstacles based on fractal principle and Murray’s law	7
Synthesis of new PPG and study of heterogeneous combination flooding systems	7
Synthesis of a lignin-based alcohol ether carboxylate surfactant and its application as cotton fiber detergent	7
Development of onion oil-based organo-hydrogel for drug delivery material	7
Green bioflotation of calcite using surfactin as a collector	7
Sodium dodecyl sulfate assisted synthesis hydroxyapatite for effective adsorption of methylene blue	7
Synthesis and comparison of two different morphologies of graphitic carbon nitride as adsorbent for preconcentration of heavy metal ions by effervescent salt-assisted dispersive micro solid phase extr	7
Development of polyglycerol fatty acid ester-based low-energy nanoemulsion for the improvement of curcumin stability	6
Complex coacervation of carboxymethyl konjac glucomannan and ovalbumin and coacervate characterization	6
Development of thermally stable coarse water-in-oil emulsions as potential DNA bioreactors	6
Electrospray technology as a probe for single step fabrication of glipizide loaded nanocochleates with enhanced bioavailability	6
Transdermal delivery of acemetacin loaded microemulsions: preparation, characterization, in vitro – ex vivo evaluation and in vivo analgesic and anti-inflammatory efficacy	6
Trapping synthetic dye molecules using modified lemon grass adsorbent	6
Study on the stability of emulsion based on molecular dynamics	6
Microwave-assisted synthesis of magnetic Pb(II)-imprinted-poly(schiff base-co-MAA) for selective recognition and extraction of Pb(II) from industrial wastewater	6
Using deep learning for the prediction of mixing patterns in two component-colored solutions as a proxy to dispersion in nanocomposite coatings	6
Application of mesoporous calcium silicate nanoparticles as a potential SD carrier to improve the solubility of curcumin	6
Tetraethylenepentamine modified magnetic cellulose nanocrystal composites for removal of Congo red with high adsorption capacity	6
Improving the stability of oily turmeric extract by microencapsulation using spray drying technique	6
A versatile approach for preparing stable and high concentration liquid metal nanoparticles on a large scale	6
Production of red mud based nanofibers and their potential in arsenate removal from waste water	6
Biochar-loaded nZVI/Ni bimetallic particles for hexavalent chromium removal from aqueous solution	6
Tribological and rheological properties of the ultrafine CaCO3 blended nano grease	6
Crossed analysis by T-history and optical light scattering method for the performance evaluation of Glauber’s salt-based phase change materials	6
Selection of emulsification system for high temperature and high salt reservoir and evaluation of reservoir adaptability	6
Optimization of oil-in-water nanoemulsion system of Ananas comosus peels extract by D-optimal mixture design and its physicochemical properties	6
Study on dispersibility and tribological behaviors of 2D ZnBDC MOFs as additive in oil	6
A new method to judge the phase inversion point of crude emulsion	6
Bubble size distribution and stability of CO2 microbubbles for enhanced oil recovery: effect of polymer, surfactant and salt concentrations	6
A spontaneous interfacial process to produce silica Janus nanosheets as perfect emulsifiers in pickering emulsions	6
Using zeolite and Fe3O4@zeolite composites in removal of Reactive Red 120 from wastewater: Isotherm, kinetic, thermodynamic and adsorption behaviors	6
Enhancement of protein flocculant properties through carboxyl group methylation and the relationship with protein structural changes	6
Iron-doped g-C3N4 modified CoMoO4 as an efficient heterogeneous catalyst to activate peroxymonosulfate for degradation of organic dye	6
A novel surface modification of Sb2O3 nanoparticles with a combination of cationic surfactant and silane coupling agent	5
Optimization of chitosan-coated W/O/W multiple emulsion stabilized with Span 80 and Tween 80 using Box–Behnken design	5
D-optimal design-assisted Elaeis guineensis leaves extract in olive oil-sunflower seed nanoemulsions: development, characterization, and physical stability	5
Partially acetylated cellulose nanofibrils from Agave tequilana bagasse and Pickering stabilization	5
Taguchi’s experimental design for the optimization of the defluoridation process using a novel biosorbent developed from the clamshell waste	5
Synthesis, characterization and investigation of chitosan-functionalized ZnFe2O4 for the removal of dichlorvos from aqueous solution	5
Geometric features in lyotropic liquid crystalline phase transitions observed in aqueous surfactant systems	5
Application of an industrial agricultural waste-based activated carbon in the treatment of water contaminated with Reactive Blue 19 dye: optimization, kinetic, equilibrium and recyclability analyses	5
Microwave-assisted demulsification for oilfield applications: a critical review	5
Silk fibroin and silk fibroin-gold nanoparticles nanocomposite films: sustainable adsorbents for methylene blue dye	5
Ultrasound-assisted production and characterization of rice bran lecithin-based nanoemulsions	5
Study on foam transport mechanism and influencing factors in foam drainage gas recovery of natural gas well	5
The mixing performance of passive micromixers with smart-rhombic units	5
Multiple Pickering emulsions stabilized by organic pigment particles: properties and ion release	5
Dynamic adsorption of dimethyl methyl Phosphonate and 2-chloroethyl ethyl sulfide on zeolite-MOR and its nanocomposites monitored by gas chromatography flame ionized detector (GC-FID)	5
Green extraction of Cu (II) in PEG-zinc sulfate aqueous two phase system using response surface methodology	5
Study on preparation and performance of fluid loss additive applied to chlorination titanium blast furnace slag	5
Mixed micellization of cationic/anionic amino acid surfactants: Synergistic effect of sodium lauroyl glutamate and alkyl tri-methyl ammonium chloride	5
Study of an anti-high-temperature and salt-resistance alkyl glycine foaming agent and its foam stabilizing mechanism	5
A comparison of anionic and cationic dye removal efficiency of industrial bauxite waste red-mud	5
Long effective tea tree oil/mesoporous silica sustained release system decorated by polyethyleneimine with high antibacterial performance	5

Effect of water saturation on the role of polymer elasticity during heavy oil recovery	5
Nano zero-valent iron supported by macroporous styrene ion exchange resin for enhanced Cr(VI) removal from aqueous solution	5
Concentration-dependent physicochemical behaviors and micellar interactions in polyalkoxylated fatty alcohol-based binary surfactant systems	5
Synthesis of TiO2-Fe2O3 nanocomposite for the photocatalytic degradation of Direct Blue 199 and Basic Yellow 28 dyes under visible light irradiation	5
Complexation and coacervation of whey protein isolate with quince seed mucilage	5
Ultrasonic assisted oil-in-water emulsions stabilized by flaxseed protein isolate: influence of different oils	5
Lipid-based formulations of microemulsion-loaded oleogels for the oral delivery of carvedilol	5
Mechanism underlying initiation of migration of film-like residual oil	5
Upgrade of low rank coal by using emulsified asphalt and its application for preparation of coal water slurry with high concentration	5
Synthesis of Fe-MOFs/h-CeO2 hollow micro-spheres and their highly efficient photocatalytic degradation of RhB	5
Allyl ester-based liquid crystal flow improvers for waxy crude oils	5
Synthesis of spherical MTX/LDHs nanohybrids by the calcination-reconstruction method	5
Chemical study of the application of nonionic surfactants nonylphenol in delaying the acidizing reaction of carbonate matrices	5
Experimental study of combined microemulsion/brine flooding to EOR in carbonate reservoirs	5
Insight into intermolecular interactions and hydration properties of biologically active amino acids in aqueous solutions of cefepime: volumetric, compressibility and viscometric studies	4
CFD-DEM coupling simulation of fixed bed reactor with small diameter ratio	4
Tribological performance and mechanism of 2D calcium borate nanoslice capped with stearic acid in rapeseed oil	4
Research progress on scaling mechanism and anti-scaling technology of geothermal well system	4
Biosynthesis of ZnO photocatalyst and its application in photo catalytic degradation of methylene blue dyestuff	4
Efficient hexavalent chromium removal through recyclable flower-like cerium phosphate polyaniline nanocomposite via adsorption-reduction pathway	4
Synergistic effect of silica nanofluid and biosurfactant on bitumen recovery from unconventional oil	4
Ultrasonic propagation in concentrated colloidal dispersions: improvements in a hydrodynamic model	4
pH-responsive supramolecular nanoparticles based on sulfobutylether7-β-CD/cationic surfactant and its controllable release of doxorubicin	4
Ultrasound assisted co-precipitation synthesis Fe3O4 nanoparticles as a magnetic adsorbent for Congo red removal	4
A study on chitosan-coated liposomes as a carrier of bovine serum albumin as oral protein drug	4
Characterization of oil-in-water pickering emulsions stabilized by β-cyclodextrin systems	4
Synthesis and application of polyacrylamide grafted GO and MWCNT nanocomposites for enhanced oil recovery: a coreflooding study	4
Characteristics investigation of silicone rubber-based RTV/µATH@nSiO2 micro/nano composites for outdoor high voltage insulation	4
Encapsulation of resveratrol in rhamnolipid-zein nanoparticles using a pH-driven method: kinetic modeling on controlled release from nanoparticles	4
Stability, rheology, and thermophysical properties of surfactant free aqueous single-walled carbon nanotubes and graphene nanoplatelets nanofluids: a comparative study	4
Using 1,2 dimethylimidazole to improve gel thermalstability for wellbore plugging in ultra-high temperature fractured reservoirs	4
Thermodynamic and solubilization properties of a polynuclear copper complex in ionic surfactants media	4
Preparation of ionic liquids microemulsion and its application for the treatment of oily sludge	4
Wettability alteration of sandstone oil reservoirs by different ratios of graphene oxide/silica hybrid nanofluid for enhanced oil recovery	4
Preparation of microcapsule suspension of herbicide oxyfluorfen polyurea and its effects on phytotoxicity on rice crop	4
Antioxidant and anti-tyrosinase activities of quercetin-loaded olive oil nanoemulsion as potential formulation for skin hyperpigmentation	4
Chitosan-nickel oxide composite as an efficient adsorbent for removal of Congo red from aqueous solution	4
Lidocaine loaded nanostructured lipid carriers for prolonged local anesthesia: in vitro and in vivo studies	4
Preparation and characterization of bio-based nano cutting fluids for tribological applications	4
Mechanism of As(V) adsorption from aqueous solution by chitosan-modified diatomite adsorbent	4
Characterization and stabilization of iron ore suspension and influence of the mixture of natural additive Sapindus mukorossi and SDS on the slurryability	4
Spiral laminar flow of yield-power-law fluids in partially blocked annulus	4
Effect of ionic strength on methylene blue sorption onto macroporous resins: a comprehensive study	4
Synthesis, characterization and dispersion stabilities of novel ionic and nonionic diol modified waterborne polyurethane dispersions with different polyols	4
Stable and bioactive W/O/W emulsion loaded with “Pitanga” (Eugenia uniflora L.) leaf hydroethanolic extract	4
Formulation of zwitter-ionic terpolymeric hydrogels and their comprehensive rheological investigation	4
Study on influencing factors of Pickering emulsion stabilized by modified montmorillonite and fatty alcohol polyoxyethylene ether	4
Tribological and rheological properties of the lubricant containing hybrid graphene nanosheets (GNs)/titanium dioxide (TiO 2 ) nanoparticles as an additive on calciu	4
Study on foam extinguishing agent based on mixed system of branched short-chain fluorocarbon anionic and hydrocarbon cationic surfactants	4
Preparation and optimization of a resveratrol solid dispersion to improve the physicochemical properties and oral bioavailability of resveratrol	4
Equilibrium, kinetics and thermodynamics study on the adsorption of Cr(VI) and as(III) by diatomite-modified MnO2	4
Formation and rheology of CO2-responsive anionic wormlike micelles based clear fracturing fluid system	4
Efficient removal of cesium and strontium from an aqueous solution using a zirconosilicate/vanadium oxide nanocomposite	4
Formulation and characteristic evaluation of tacrolimus cubosomal gel for vitiligo	4
Synthesis of polytriethanolamine based surfactant and its flotation performance evaluation of oilfield produced water treatment	4
Effects of waterborne epoxy resin on the mechanical properties and microstructure of oil-well cement	4
Pickering emulsions stabilized by sphere-spheroid mixtures	4
Investigation into the effect of polymer microspheres (PMs) on oil-water relative permeability and oil-in-water emulsion stability for enhanced oil recovery	4
Study on the influence of heavy oil group components on the formation and stability of W/O emulsion	4
A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints	4
Numerical simulation of droplet deformation in low frequency half-sinusoidal electric field	4
Rheology on high temperature resistant novel trimeric cationic viscoelastic surfactant with KCl	4
Binding aspects of carboxymethyl cellulose onto polymeric surface from its aqueous solutions	4
Unsteady three dimensional radiative-convective flow and heat transfer of dusty nanofluid within porous cubic enclosures	4
Cellulose bridged carbonate hydroxyapatite nanoparticles as novel adsorbents for efficient Cr(VI) removal	4
Extended release of 6-aminopenicillanic acid by silanol group functionalized vermiculite	4
Creep experiments and theoretical research of shale hydration damage based on NMR	4
Zirconium–Cerium and Zirconium–Lanthanum complexed polyvinyl alcohol films for efficient fluoride removal from aqueous solution	4
Design of a α‐Fe2O3/SiC heterojunction to improve photocatalytic performance through a Z-scheme electronic transfer	4
Enhanced removal of fluoride from simulated groundwater by hydrochloric acid activated natural sepiolite nanofibers	4
Stabilization of water-in-water pickering emulsions by charged particles	4
N-doped graphene quantum dots for enhancing multi-level Bi2Ti2O7 spheres photocatalytic activity via electronic trapping	4
Preparation and performance of SiO2-nanostructured lipid encapsulating sunscreen	3
Rapid removal of rhodamine dye from aqueous solution using casein-surfactant complexes: role of casein-surfactant interaction	3
Development of pitavastatin-loaded super-saturable self-nano emulsion: a continues screening and optimization approach using statistical technique	3
TX-100 adsorption from aqueous solution using modified graphene oxide; optimization by response surface methodology and one factor at a time techniques	3
Preparation, characterization of PVDF/PVP/MMT mixed matrix membranes and their application for the removal of heavy metals from wastewater	3
CO2/N2 and light dual-stimuli responsive wormlike micelles based on CTAB and conventional compounds	3
Copper electrode for the removal of chromium from dyestuff industries effluent by electrocoagulation: kinetic study and operating cost	3
Encapsulation of Cu-doped TiO2 nanocomposites with the understanding of weak photocatalytic properties for sunscreen applications	3
Evaluation of structure-reactivity correlation of efficient corrosion inhibitor ionic liquids for mild steel in acidic medium	3
Preparation and properties of modified nano-montmorillonite viscosity reducers	3
Removal of zinc by emulsion liquid membrane using lecithin as biosurfactant	3
The synthesis and properties of siloxane-urethane copolymers aqueous nanodispersion using hydroxyalkyl and hydrohxypolyester terminated polydimethylsiloxane	3
The roles of free carbon over ZnO in enhancing the photocatalytic properties for removal of Cr(VI)	3
Preparation and characterization of patauá and pracaxi Brazilian vegetable oil emulsions	3
Removal of Reactive Red 195 and Methylene Blue dyes by adsorption on the surface of cobalt hydroxide-supported polystyrene waste particles	3
Synthesis of temperature-responsive P(vinyl pyrrolidone-co-methyl methacrylate) micelle for controlled drug release	3
Design and optimization of liquisolid compact based vaginal sustained release tablet of antifungal agent for vaginal candidiasis	3
Biopesticide formulations of karanj and castor oil using soapnut	3
Apparent molar volume, compressibility, and spectroscopic studies of ionic surfactants in aqueous solutions of antibiotic gemifloxacin	3
Tailored pore structure of ZIF-8/chitosan-derived carbonaceous adsorbent by introducing mesoporous silica nanoparticles for superior CO 2 uptake	3
Chelating solid-phase polymeric adsorbent for the removal of Hg2+ ions from aqueous solutions: preparation, characterization and adsorption optimization studies	3
Mucor sp. (Fungal Philospheric ) of Gambir ( Uncaria ) Leaf surface as a biosynthetic Mg doped ZnO Nanorods media for a	3
Removal of duloxetine from aqueous solution by adsorption onto chemical crosslinked alginate beads	3