Korean Journal of Chemical Engineering

Papers
(The median citation count of Korean Journal of Chemical Engineering is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)
ArticleCitations
Enhancing the electrical conductivity of stretchable silicone composite textiles using ethanol solvent treatment68
High-Efficiency Biocatalytic Production of Androsta-1,4-diene-3,17-dione via a Dual-Enzyme Coupling System in Escherichia coli57
Development of real time responding hydrogen fueling protocol and its risk assessment50
Objectives, challenges, and prospects of batch processes: Arising from injection molding applications48
Rationalizing the Efficiency of HKUST-1 for Capture and Biomimetic Sequestration of CO245
Large-Scale Batch (1 m2) Production and Mechanical Assessment of Mushroom Mycelium Mats45
Effects of surface silylation on dye removal performance of mesoporous promoted titania-silica nanocomposite43
Optimization of Hydrothermal Synthesis of Nickel Oxide with Flower-Like Structure43
Recent Development on Photocatalysts and Membrane Processes for Photoreduction of CO2 into C1 Solar Fuels41
Correction to: Efficient dual adsorption of eosin Y and methylene blue from aqueous solution using nanocomposite of graphene oxide nanosheets and ZnO nanospheres38
Thermally Enhanced Supercapacitive Performance of ALD-Grown TiO2 Thin Film on Phosphorus-Doped MnO2 as a Positive Electrode34
Experimental study on CO2 bubble dynamics under different solution viscosity and absorbent concentration34
Optimizing Crosslinked Dextran Microspheres: Morphology Control and Particle Size Engineering via Population Balance Modeling and Genetic Algorithm34
Industrial symbiosis: Boron waste valorization through CO2 utilization32
Preparation of N-Enriched GO Adsorbents and Their Properties for Selective CO2 Capture32
Quantitative Risk Assessment of a Liquid Organic Hydrogen Carriers-Based Hydrogen Refueling Station28
Hydrogen production by catalytic steam reforming of waste cooking oil over La-Ni/ZSM-5 catalyst28
Techno-Economic Assessment of CO2 Mineral Carbonation Process Using FGD Gypsum for Co-Production of Value-Added Calcium Carbonate and Ammonium Sulfate28
Photothermal Water Evaporation via Hollow-CuS Embedded PDMS Sponge Under UV, Visible, and IR Irradiation26
A new ternary mixed-matrix membrane (PEBAX/PEG/MgO) to enhance CO2/CH4 and CO2/N2 separation efficiency26
Electrochemical study for simultaneous detection of procaine hydrochloride and its metabolite in biological samples using a nanostructured strong sensor26
Leaching Behavior of the Main Metals of Decopperized Anode Slime26
Cu-Fe Oxide Nanozymes with Enhanced Peroxidase-like Activity for Sensitive H2O2 Colorimetric Detection26
Review of Small Modular Reactors: Challenges in Safety and Economy to Success25
Eco-friendly Fabrication of Perovskite Solar Cells: From Material Engineering to Recycling25
Experimental study rheological behavior of MWCNT (10%)-TiO2 (90%)/SAE40 hybrid nano-lubricants (HNLs) post-processing of the results with response surface methodology (RSM)24
Regulating Zinc Nucleation via KOH-Etched and Cu-Coated Carbon Felt for Stable Zinc–Vanadium Redox Flow Batteries24
Optimizing Hydrate-Based CO2 Capture in Saline Environments Using Low-Dosage THF for Seawater Utilization24
Materials and Microstructure in Solid Oxide Electrolysis Cells: Linking Performance and Durability23
Bio-base Metal Organic Frameworks as Potential CO2 Adsorbents23
Potential organic magnetic nanoparticles from peel extract of Archidendron pauciflorum for the effective removal of cationic and anionic dyes22
Tailoring Antibacterial PVDF Membranes by Radiation-induced Acrylic Acid Grafting and Metal Nanoparticle Embedding22
Self-Assembled Monolayers as Hole-Selective Contacts in Inverted Perovskite Solar Cells: A Review22
CO2-Utilization Facilitated by Solid Reaction Mediums—A Review22
Biomass Oxidation in Direct Biomass Redox Flow Fuel Cell: The Roles of Catalysts, Redox Couples, Mediators and Oxidants22
Benzothiazole–Thiourea Functionalized MgO Nanoparticles for Efficient Cadmium(II) Adsorption: Synthesis, Characterization, and Mechanistic Insights21
Identification of Representative Wind Power Fluctuation Patterns for Water Electrolysis Device Stress Testing: A Data Mining Approach21
Effectiveness of Zeolitic Imidazolate Framework-8 (ZIF-8) Coated on Wood Blocks to Deter Termites and Optimized Concentration and Application21
Non-chromatographic Method for the Purification of High-Purity Paclitaxel from Taxus chinensis Using Tandem Cavitation Fractional Precipitation21
Controllable Preparation of Zeolite-P/Calcined Diatomite with MgCl220
One-step solvothermal synthesis of poly(arylene ether nitrile) decorated magnetic composite for methylene blue adsorption from aqueous solution19
Noncatalytic Solid-State Hydrolysis of Sodium Borohydride with Sodium Metaborate Hydrate19
Continuous Flow Cobalt‑mediated Radical Polymerization of Vinyl Acetate and Hydrolysis of Polyvinyl Acetate to get Polyvinyl Alcohol: Concurrent Control and Purification19
Enhancing Radiological Emergency Response Through Agent-Based Model Case 2: Time Required for Staff Assemble19
Valorization of Corncob as a Sustainable Feedstock for Lactic Acid Production via Improved Biomass-to-Glucose Conversion Based on KOH Pretreatment19
Metal Incorporated Mesoporous Silica for Hydrogen Isotope Gas Separation Application in Heavy Water Nuclear Power Plant19
Production of Glycerol-Free Biodiesel Using Pollen-Derived CaO Heterogeneous Catalyst19
Recent Advances in Perovskite-Based Heterojunction Photocatalysts: Synthesis, Properties, and Applications19
Lauroyl Lysine Continuous Injection Synthesis via Schotten–Baumann Reaction pH Optimization as Synthetic Amino Acid Derivative19
Artificial Synaptic Devices Based on P-type and N-type Organic Materials for Advanced Neuromorphic Computing18
Activated carbon (AC)-metal-organic framework (MOF) composite: Synthesis, characterization and dye removal18
AI-Based Prediction Module of Key Neutronic Characteristics to Optimize Loading Pattern for i-SMR with Flexible Operation18
Carbon Dots: Preparation and Their Application in Electrocatalytic Oxygen Reduction18
Formation of Asymmetric Colloidal Multilayers via Subduction of Laterally Segregated Domains at the Air/Water Interface18
A CPFD Simulation on Hydrodynamics of Carbon Nanotube Aggregates in a Fluidized Bed18
Techno-economic analysis of the integrated DME production process: Effects of different separation trains and recycling strategies18
Metal‑Free Nitrogen‑Doped Carbon Catalysts for NaBH4 Methanolysis: Spectroscopy‑Anchored Defect Descriptors for Low‑Temperature Hydrogen Release18
Insights into Cu@FeEu-N-C/pCN: A Tri-functional Composite for Electrochemical Water Splitting, Oxygen reduction, and Supercapacitor Applications18
Modelling of Humic Acids Extraction Process Assisted by Low-Intensity Ultrasound with the Use of Three-Level Fractional Factorial Design18
Paper-Based Solid-State Micro-supercapacitors Fabricated by Hydrophobic Wax Barrier Printing18
Non-volatile and Stretchable Polyvinyl Chloride-Based Solid-State Electrolyte for Capacitive Energy Storage18
Impact of Glass Particles on Sodium-Ion Conducting Solid Polymer Electrolytes18
Synthesis of graphitic carbon from Pisum sativum for supercapacitor applications17
Small-Angle Neutron Scattering from Research Nuclear Reactor Sources: Probing Nanostructures in Rechargeable Battery17
Exergy and Economic Analysis of Water-to-Grid Supply Chain of Hydrogen Using the Physical and Chemical Storage System17
Integrated Optimization of Design and Operation in an Industrial Steam Methane Reforming Reactor17
Compost as Green Adsorbent for the Azo Dyes: Structural Characterization and Dye Removal Mechanism17
Solid Polymer Electrolytes-Based Composite Cathodes for Advanced Solid-State Lithium Batteries17
Upscaled Catalytic Production of Renewable Biofuels from Hexanoic Acid17
Co-feeding effect of municipal sludge on the pyrolysis of polyethylene terephthalate16
Selective CO2 Transport in Cellulose-Based Electrolyte Membranes Enabled by Ag+–π Complexation and Al3+ Stabilization16
Modeling and optimization of dynamic viscosity of oil-based nanofluids containing alumina particles and carbon nanotubes by response surface methodology (RSM)16
Thermodynamic, economic, as well as risk and reliability analyses of a molten carbonate fuel cell-based combined cooling, heating, and power system16
Thermotropic liquid crystalline 4-(Nonyloxy) benzoic acid: Phase transition temperatures, thermodynamic characterization, and separation of structural isomers16
Hydrothermal Synthesis of Fe-Doped Nickel Cobalt Phosphate Nanofibers for High-Stability Electrochemical Overall Water Splitting16
Effect of Surface Tension on Thermocapillary Convection-Driven Droplet Transport16
Multi-objective optimization of a methanol synthesis process: CO2 emission vs. economics16
Synthesis and Property Control of Bead-Shaped Silica Adsorbents for Rhodamine B Dye Adsorption16
Eco-Friendly Biodiesel Synthesis via Microbubble-Aided Transesterification and Leaf-Derived Green Carbon Catalyst16
Photocatalytic degradation of the organophosphorus insecticide chlorpyrifos in aqueous suspensions using a novel activated carbon ZrO2-ZnO nanocomposite under UV light16
Life Cycle-Based Strategy and Feasibility of Surplus-to-X-to-Electricity on Domestic Surplus Utilization in the Republic of Korea16
A Prospective Technology: Hemostasis with α-Cyanoacrylate Medical Adhesive via Electrostatic Spray Deposition Mode16
Fence Line Monitoring of Petroleum Refining Plants in Korea: UV-DOAS Analysis of SO2, NO2, and Benzene Emissions for Comprehensive Management15
Ag-decorated Vo-TiO2 Photocatalyst for Efficient Visible Light-Mediated Methotrexate Degradation15
Importance of uniformly redistributing external pressure on cycling of pouch-type Li-metal batteries15
Optimization of water-saturated superabsorbent polymers for hydrate-based gas storage15
Effects of Membrane Electrode Assembly Fabrication and Operation Parameters on the Performance of Anion Exchange Membrane Ammonia Electrolyzers15
Cost and Efficiency Optimizations of ZnO/EG Nanofluids Using Non-dominated Sorting Genetic Algorithm Coupled with a Statistical Method15
Evaluation of Ingredient Transparency in Chemical Products and Its Influence on Consumer Trust and Safety Perception15
Poly(ethylene glycol) (PEG)-based microgels embedded with magnetic nanoparticles for tannin removal and valorization15
A 2D/2D BiPO4/g-C3N4-B Z-type heterojunction for enhanced photocatalytic degradation of dye pollutants14
Integration of thermochemical conversion processes for waste-to-energy: A review14
Multi-period Deployment of Electrochemical CO2-to-CO Reduction Technology Considering Time Varying Uncertainties14
Influence of Glass-Lined V-Shaped Stirrers on Crystallization Properties14
Examining the Potential of CuO/ZnBi2O4 Heterojunction Photocathode in the Photoelectrochemical Water-Splitting Applications14
Enhanced Thermofluidic Modeling and Open-Source Rigorous Simulation of Hydrogen Fueling Systems Validated with Real-World Data14
Hydrodynamics of gas-liquid and biophase-gas-liquid systems in stirred tanks of different scales14
SOHIO Process Legacy Waste Treatment: Antimony(V) Removal from Sulfate Media Using Organic Polymeric Ion Exchange Resins14
Life Cycle Assessment of Recyclable and Non-recyclable Wind Turbine Blade Materials: a Case Study of South Korea’s Offshore Wind Farm14
Removal of carbon residue precursor in waste plastic pyrolysis oil via oxidation14
Synthesis of Zeolitic Imidazolate Framework-14 from Zinc Chloride and its Application as a Catalyst for the Synthesis of 1-Methoxy-2-Propanol14
Liquefaction of Latex Glove Waste for Volume Reduction14
Discontinuous Dewetting-Based Synthesis of Monodisperse Polydimethylsiloxane Microparticles with Tunable Aqueous Dispersibility via Surface Engineering14
Effect of cohesive particle addition on bubbling characteristics of gas-solid fluidized bed: Meso-scale mechanism14
Activated carbon from municipal waste for enhanced CO2/CH4 membrane separation: Experimental, modeling and simulation14
CuxO–TiO2–Embedded Nanofiber Filters with Optimized Cu/(Ti/C) Composition for Sustained Visible–Light–Driven Antiviral Performance13
Advances in Nitrogen-Functionalized Cellulose Aerogels for CO2 Capture13
Artificial Flexible Sensory Electronics Mimicking Human Somatosensory System13
Enhancement analysis of turbulent flow and heat transfer of supercritical CO2 in a static mixer with three helical blades13
Dynamic simulation and control of a triple column process for dimethyl carbonate-methanol separation13
Novel silicatein-like protein for biosilica production from Amphimedon queenslandica and its use in osteogenic composite fabrication13
Techno-economic Assessment of Advanced SOEC Systems for Hydrogen Production in South Korea: Bridging System Design and Regional Market Realities13
Vanadium redox flow batteries including carbon catalysts derived from low-density polyethylene and polyurethane13
Iron-loaded carbon derived from separated microplastics for heterogeneous Fenton degradation of tetracycline hydrochloride13
Synergetic Hydrogen and Methane Productions from Anaerobic Digestion of Selected Rural-Farming Plant and Animal-Based Biomass Wastes13
Ion-dipole complex effect on activity coefficient of L-methionine in aqueous NaCl and NaNO3 solutions13
Hydrothermal Pretreatment and Liquefaction Co-Production of Xylo-oligosaccharides and Bio-Based Polyols from Wheat Straw13
Novel NO removal using combined sodium erythorbate and FeIIEDTA system13
Direct fabrication of graphitic carbon nitride-wrapped titanate nanotube arrays toward photoelectrochemical water oxidation in neutral medium13
Enhanced adsorption of lead ions by enzymatically synthesized poly(m-phenylenediamine)-graphene oxide composites13
Janus Silica Nanoparticles at Three-Phase Interface of Oil–Calcite–Electrolyte Water: Molecular Dynamics Simulation13
Fabrication of Flexible Nickel Hydroxide Electrode for Nickel–Zinc Battery13
Time-Lapse Traces of Transformation of CdTe Nanoparticles into Nanowires via Self-Assembly13
CFD Study and RSM Optimization of Acetylene Production in Partial Oxidation Process12
Desalination Performance of a Unique Capacitive Deionization Cell Optimized with ANSYS Flow Simulation12
Fabrication and application of drug eluting stent for peripheral artery disease12
Effects of the Electrode Supporter Structures for Achieving Optimum Hydrodynamic Performance for a Zero-gap Alkaline Water Electrolysis Cell12
Heterogeneous Catalytic Gasification of Biomass to Biofuels and Bioproducts: A Review12
Regeneration and Reusability of HDBM-TOPO for Lithium Recovery from Industrial Effluent of a Battery Recycling12
Preparation of Self-grow Bimetallic Catalysts by Recovering Cu (II) and Mn (III) using Fly Ash-based Geopolymer Microspheres12
Facile antisolvent crystallization-based synthesis of Cu/CoO nanocomposites as catalysts for the electrochemical detection of H2O212
A Review on Sustainable Microalgae-Based Approaches for CO2 Capture, Bioenergy, and Value-Added Products12
Synthesis and Electrochemical Properties of Hydrosulfide Solid Electrolytes12
Eco-friendly Chebulic Myrobalan-Derived Porous Carbon Employed as an Electrocatalyst for the Production of Hydrogen12
The electrochemical performance of lotus-root shaped meso-/macroporous TiO2 anode for lithium-ion battery12
Donor Numbers for Ionic Liquids and Carbonate Solvents Using 7Li and 23Na as Probes12
Colloid-facilitated Radionuclide Transport in High-level Nuclear Waste Repository: A Review of Experimental Studies12
Microbially induced calcium precipitation based anaerobic biosynthetic crystals for removal of F− and Ca2+ in groundwater: Performance optimization, kinetics, and reactor operation12
Solvent-Engineered Extraction of Ziziphus Mauritiana Essential Oils as Functional Antimicrobial Additives for Antimicrobial Coatings and Packaging Systems12
Degradation Assessment of Commercial Lithium-Ion Batteries Recovered from Consumer Electronic Devices12
Phenolic Compounds: Investigating Their Anti-Carbonic Anhydrase, Anti-Cholinesterase, Anticancer, Anticholinergic, and Antiepileptic Properties Through Molecular Docking, MM-GBSA, and Dynamics Analyse11
Two-dimensional polymeric cobalt phthalocyanine synthesized by microwave irradiation and its use for continuous glucose monitoring11
Experimental and DFT investigations on the supramolecular mechanism of Ni(II) extraction via D2EHPA blended 1-octanol extractant: Application of vegetable oils as diluents11
Phase Equilibria of Binary Mixtures of 3-Chloro-2-Hydroxypropyl Methacrylate and 2-N-Morpholinoethyl Methacrylate in Supercritical Carbon Dioxide11
Investigating the Impact of Methanol Concentration and Implementation of a Coefficient Diagram-Based Control System for Direct Methanol Fuel Cell Operation11
Comparison and Evaluation of Marginal and Internal Gaps in Zirconia Crowns Fabricated Using Additive Manufacturing with Top-Down Approach11
Enhancing the Performance of LiFePO4 Cathodes in Li-ion Batteries: Role of Surface Coating Based on ZIF-8 Particle Size Optimization11
Silk Fibroin-Regulated Biomimetic Mineralization of Ni(OH)2 for Energy Storage Applications11
An Environmentally Applicable Thiourea-based Colorimetric Chemosensor for Monitoring ClO⁻11
Acid-doped polyaniline membranes for solar-driven interfacial evaporation11
Preparation of thermally recyclable γ-alumina nanoparticles from boehmite for adsorption of anionic dyes: Spectrophotometric study, structural characterization and industrial experience11
Bio-mediated Synthesis of ZnS–ZnO Nanocomposite from Cucumis melo Pulp and Chicken Feathers: Photodegradation of Dyes and Antibacterial Activities11
Circulation of boron resources from desalination brine through solvent extraction (TMPD/2-ethylhexanol with kerosene) and ionic-liquid extraction (ALiCy/kerosene) methods11
Evaporation-Driven Three-Dimensional Supraparticle Synthesis Using Multiple Liquid-Repellent Surface Templates11
Experimental and Simulation Insights into the Thermophysical Properties of Dibutyl Ether Mixed with n-Heptane and n-Octane11
Enhanced Photocatalytic Reduction of Carcinogenic Bromate in Water Using Self-Assembled Integration of Titanium Dioxide and Alpha-Sulfur11
Advancement in Electrolyte Materials for Solid Oxide Fuel Cells11
Enhanced bioleaching of valuable metals from spent lithium-ion batteries using ultrasonic treatment11
Degradation mechanism of polyethylene separators in lithium-ion batteries after prolonged cycling11
Pyrolysis kinetics and thermodynamics of discarded Bakelite11
Ionic liquid functionalized graphene oxide for the adsorption of Ca2+ and Mg2+ ions from saline aqueous feed11
Investigating the Foaming Process of a Thermoplastic Elastomer (TPE) Using Rheology and Image Analysis11
Photoelectrocatalysis performance of Se doped-TiO2/Ti nanotube arrays for visible-light-driven degradation of diazinon pesticide11
Effect of spinning parameter on the properties and performance of hollow fiber supported liquid membrane for levulinic acid extraction11
One-Step Emulsification Enables High Loading of Hydrophobic Drugs, But Not Transdermal Delivery: Phase-Inversion-Driven Double and Single Emulsions Stabilized by Silica Nanoparticles11
Deep Learning for Green Chemistry: An AI-Enabled Pathway for Biodegradability Prediction and Organic Material Discovery11
Nitriding-Induced Degradation of Structural Steels in High-Temperature Ammonia Utilizing Systems11
Current Progress in the Application of Artificial Intelligence for Nuclear Power Plant Operation10
Development of a liquid-based cytology method for detecting cervical cancer cells using functional gold nanorods10
Systematic Narrowing of ZIF-8 Apertures via Controlled 2-Ethylimidazole Doping for Hydrogen/Carbon Dioxide Separation10
Study in the Effect of Naphthenic Acid on the Electrocoalescence of Crude Oil Under High-Frequency Pulsed Electric Field10
Synthesis of ternary core-shell carbon sphere@α-Fe2O3@Ag composites and their application for simultaneous voltammetric detection of uric acid, xanthine, and hypoxanthine10
A novel approach to measuring fluid saturation using X-ray computed tomography10
Environmentally Friendly Separation of Lithium and Cobalt from Spent Li-ion Batteries Using Water and Organic Acid Leaching10
Microkinetic study of syngas conversion to dimethyl ether over a bifunctional catalyst: CZA/FER10
Synthesis and Characterization of Bimetallic ZnCo-ZIF-71 with Defect for an Efficient Catalytic CO2 Conversion10
Diffusion behavior of THO, Sr, Cs, and Am through concrete and its chemical degradation10
Structure-H Type Hydrates Containing Cyclooctane-Based Epoxy (Oxirane) Compounds10
Tetrabromobisphenol A Degradation by a Photoelectrocatalytic System with a Carbon Layer-Protected Cuprous Oxide Cathode: Performance and Promoting Mechanism10
D-Sorbitol Xanthate-Based Hydrogel Polymer for Cost-Effective and Efficient Removal of Potentially Toxic Elements from Aqueous Solutions10
Deposition of Ag@AgCl onto Flower-Like BiOCl for Promoting the Degradation of Methyl Orange: The Narrow Bandgap and Surface Plasmon Resonance Effect10
Thermophysical properties of N-isopropyl-2-propanamine+alkanol (C1-C3) mixtures as absorbents for carbon dioxide capture10
Rhodamine B dye degradation by fabricated Ti/RuO2 anode: Optimization by RSM, reaction mechanism, study of sludge10
The Preparation of Na-A Zeolite Using Sludge Gasification Ash and Its Application in Cu2+ Removal from Wastewater10
Efficient Extraction of Dichromate Anions Using TOPO in Multi-Dropped Liquid Membrane10
Bio-based composite as phase change material including spent coffee grounds and beeswax paraffin10
Diversified component incorporated hybrid nanoflowers: A versatile material for biosensing and biomedical applications10
A data-based scheduling methodology for constructing hydrogen refueling stations10
Bubble behavior and nucleation site density in subcooled flow boiling using a novel method for simulating the microstructure of surface roughness10
Photocatalytic Degradation of Rhodamine B via Fe-g-C3N4 Activated Sulfate Radical-Based Advanced Oxidation Processes and the Synergistic Mechanism10
Fabrication of highly effective aramid fiber-based polypropylene composite membranes for desalination10
Enhanced Porosity of Cellulose Acetate Membranes: A Comparative Study of Gas Pressure and Water Pressure Processes10
Bioelectrochemical treatment of olive oil mill wastewater using an optimized microbial electrolysis cell to produce hydrogen10
Thioanisole oxidation promoted by new niobium-based catalyst: The effect of surface hydroxyl groups on catalytic performance10
Process Integration and Design of Amino Acid Purification Processes for Energy Savings: An Industrial Case Study10
Preparation of carbonaceous monolith from polyacrylonitrile@lignin hybrid composite and its sensing and adsorption capability10
Performance and cost-benefit analysis of anaerobic moving bed biofilm reactor for pretreatment of textile wastewater10
Rapid Removal of Phenothiazine Pollutants by Novel Catalytic Composites Derived from Sewage Sludge: Decolorization and Degradation Mechanism10
Atomically Dispersed Fe–N–S-Doped Carbon as an Efficient Li–S Battery Host for Capturing Polysulfides9
A practical approach for kinetic analysis of hydrogenation of complex mineral base oil9
Effect of Oxyfluorination of Activated Carbon on the Adsorption of Tetracycline from Aqueous Solutions9
Impact of ammonium sulfate and kaolin on ash deposition during co-firing of straw pellets and pulverized coal9
Design of novel hyper-branched dendritic boehmite/gallic acid alumoxane for methylene blue removal: Adsorption mechanism and reusability9
Influence of Medium Concentration, Surface Properties, and Chemotaxis on Biofilm Formation of Pseudomonas aeruginosa in Microfluidic Channels9
Furfural Recovery from Kenaf Using High-Pressure CO2 for 1,4-Butanediol Production9
Economic Evaluation of Multi-recycling and Once-Through Fuel Cycle Considering National Plans9
Reinforced Sweet Potato Starch Bioplastics with Kenaf Fiber and Indian Jujube Extract9
Isobaric Vapor-Liquid Equilibrium for Binary Systems of Ethyl Methyl Carbonate (and Diethyl Carbonate) + Ethyl Propionate, + Methyl Propionate at 101.3 kPa9
Selenium Control in the Electrolyte of Electrowinning Nickel System: Speciation, Electrochemical Analysis and Removal Strategies9
Exergy destruction improvement of hydrogen liquefaction process considering variations in cooling water temperature9
Bioprospecting of biosurfactant-producing bacteria for hydrocarbon bioremediation: Optimization and characterization9
Implication of hydrolysis on vanadium precipitation with acidic ammonium salt from high concentration of alkaline vanadium solution9
Carbon Dioxide Removal by Chemically and Thermally Reduced Graphene-Based Adsorbents9
Sustainable production of acrolein over highly stable and selective WO3 over SiO2-TiO2 catalysts9
Azo Dye Decolorization in Sole Biocatalyzed Electrolysis System (BES) and Coupled with Anaerobic Sequencing Batch Reactor (ASBR-BES) in Operation with Ideal Synthetic Wastewater and Domestic Wastewate9
Directing battery chemistry using side-view operando optical microscopy9
Nanoparticle Doped Polymers for Radiation Shielding: A Review9
Cytotoxic Effects of Particulate Matter on Cell Growth and Metabolism of Green Fluorescent Protein-Expressing Escherichia coli9
Green Synthesis of ZnO/αFe2O3 Nano-photocatalyst for Efficient Removal of Carbamate Pesticides in Wastewater: Optimization, Mineralization, and Financial Analysis9
Preparation of NiFeCoMnCr Hydroxide on Nickel Foam by Corrosion Method and its Enhanced Electrochemical Performance in Oxygen Evolution Reaction9
Vapor-Phase Deposited Polymer Dielectric Layers for Organic Electronics: Design, Characteristics, and Applications9
Low-temperature synthesis and characterization of porous chromium terephthalate MIL-101(Cr) and its photocatalytic degradation of phenanthrene9
Methanol Oxidation on RuO2(110): Insights from DFT and Microkinetic Modeling9
Process synthesis and optimization for the isolation and purification of paclitaxel from Taxus chinensis9
A Framework for Electricity Demand Forecasting under AI and EV Expansion: Comparative Analysis of ARIMAX, Prophet, and Diffusion Models9
Characteristics of the all-vanadium redox flow battery using ammonium metavanadate electrolyte9
Tailoring Atomic Metal Species for Electrochemical-Driven Urea Synthesis Coupled with CO2 and Nitrogen Sources in Aqueous Media9
Synthesis of Hexafluoropropylene Oxide from Hexafluoropropylene and Hypochlorite Using Hydrofluoroether Solvent9
Improvements in Photoluminescence Efficiency and Stability of CsPbBr3 Nanocrystals Through 3-Aminopropyltriethoxysilane Treatment9
Applications of Rice Husk for Adsorption of Organic Contaminant and Synthesis of Silica Nanopowder Using CO2 as Reactant9
Underlying Developments in Hydrogen Production Technologies: Economic Aspects and Existent Challenges9
Heptafluoroisopropyl Methyl Ether as a Low Global Warming Potential Alternative for Plasma Etching of SiC9
Synthesis of Nanodiamond-TiO2 Composites with Excellent UV Shielding Performance and Development of a Continuous Mass Production Process9
PCR Amplification of HPRT1 Gene Within Photo-Crosslinkable Gelatin Methacrylate Hydrogel for Molecular Diagnostics9
Two-phase Electrolytes for Lithium Metal Batteries9
Facile synthesis of polynorbornene-based binder through ROMP for silicon anode in lithium-ion batteries9
Enhanced degradation of 2,4-dichlorphenoxyacetic acid herbicide by CaO2 activated by Fe(II) and ultrasound irradiation: Practical insight and mineralization9
Design of Experiments for Optimizing Silver–Graphene Composite as a Conductive Paste9
Advancements in Stretchable Healthcare Devices: Material Innovations and Applications for Real-Time Health Monitoring8
Solvent-Free Dry-Process for Developing High-Performance Lithium–Sulfur Batteries8
Fabrication of g-C3N4 nanosheets on stainless steel mesh for effective separation of oil from water8
Experimental and Machine Learning Investigation of VLE/VLLE Behavior in the Methyl Acetate–Methanol System Using ChCl: EG Deep Eutectic Solvent8
Study on temperature characteristics of gasoline engine particulate filters during fuel cut-off8
Hydrogen Production, Storage, and Decarbonization via Heterogenous Catalytic CO2 Hydrogenation8
Intertwining porous silicon with conducting polymer for high-efficiency stable Li-ion battery anodes8
Waste Plastic-Biomass Co-Gasification for Sustainable Hydrogen Production: Parametric Optimization, Techno-Economic Analysis, and Life Cycle Assessment8
Enhanced Photocatalytic Performance of ZIF-67@ZIF-11 in Binary MOF Systems for Rapid Removal of Persistent Organic Pollutants8
Modified Sucrose Biochar Goethite (α-FeOOH): A Potential Adsorbent for Methylene Blue Removal8
Optimization of Green Solvent-Based Extraction to Improve Lutein Recovery from Dunaliella tertiolecta Targeting Nutraceutical Applications8
Techno-economic analysis of methanol and ammonia co-producing process using CO2 from blast furnace gas8
0.31718182563782