Chemical Engineering Research & Design

Article	Citations
Effect of operating condition on the properties of ectoine particles for improving the purification process	148
Effect of bubble-to-oil size ratio on dynamic behavior in flotation	139
A new method for measuring the uniformity of multiphase mixing in direct contact heat exchangers based on the EMT system	128
Contents	114
A modeling analysis on industrial radial-flow packed-bed reactors for the catalytic dehydrogenation of long-chain normal paraffins: Appraisal of the modeling approach	112
Numerical simulation on liquid-solid two-phase erosion characteristics of pipe bends with different bend angles	110
Characterization and optimization of a used cooking oils collection chain – Study case Bogotá, Colombia	105
A cluster-based drag model of rough sphere for the simulation of fast fluidization	103
Contents	96
Flux decline in crossflow ultrafiltration-based diafiltration process for lignin recovery from a deep eutectic solvent comprised of lactic acid and choline chloride	93
Hydrodynamics aspects of asymmetric rotating impeller columns at different scales	92
Experimental investigation of the flow properties of layered coal-rock analogues	91
A solar-driven CPC photoreactor for decomposition of emerging contaminants in wastewater: Modeling and optimization	89
Modified emulsion polyvinyl chloride membranes for enhanced antifouling and dye separation properties by introducing tungsten disulfide (WS2) nanosheets	87
Contents	84
An anti-greedy random walk algorithm for heat exchanger network synthesis	79
Removal of hydrocarbon pollutants from aqueous media using hydrophobic cellulose-based adsorbents	77
Cost-effectiveness analysis in the manufacture of allogeneic human induced pluripotent cells in Japan by agent-based modeling	71
Effect of fluidized bed shapes on gas-solid fluidization characters and flow regime transition	70
Biochar-supported zinc ferrite for H2S removal at room temperature in anaerobic conditions	67
Structural optimization of hydrocyclone coalescer based on response surface method	64
Process optimisation of low silica zeolite synthesis from spodumene leachate residue	61
Liutex-based flow structure characterization in vibrating downhole hydrocyclone for oil-water-sand multiphase systems	61
On flow close to cavern boundaries in yield stress fluids - revisited. Current interpretation	60
Dynamic control analysis of energy-efficient side-stream extractive distillation process for separating close-boiling mixture	59

Blending in unbaffled and baffled mechanically agitated vessels – Effect of Reynolds number and liquid height	59
Artificial neural networks modeling ethanol oxidation reaction kinetics catalyzed by polyaniline-manganese ferrite supported platinum-ruthenium nanohybrid electrocatalyst	57
Double tube configuration of atmospheric pressure plasma jet for deposition of organic coatings in open air	57
Investigation on structural optimization of rotational hydrodynamic cavitation reactor with a tapered rotor for organic dyes degradation	55
Structural and property analysis of different components in coal liquefaction residue raffinate based on density separation	54
A novel approach for modeling and simulation of vibrating fluidized bed dryers: Industrial scale case study	54
Continuous degradation of 1,4-dioxane by the combination of a stripping column and photo-Fenton reaction in a continuous stirred tank reactor	53
Synthesis of mesoporous γ-alumina from a low-grade boehmite ore: Effect of thermal/chemical processing order on physico-chemical characteristics of adsorbent and regeneration of used transformer oils	53
A porous-crust drying model for a single dairy droplet	52
Dehydration of isopropanol by poly(vinyl alcohol) hybrid membrane containing oxygen-plasma treated graphene oxide in pervaporation process	51
Selectivity engineering with Single Feed Hybrid Reactive Distillation Configurations: Complex reaction schemes with inerts and inert forming azeotropes	50
Machine learning-driven prediction and optimization of norfloxacin removal efficiency and energy consumption in plasma process system	49
Treatment of lignin enriched paper industry wastewater by electrocoagulation: Modelling approach and economic evaluation	49
Effects of process parameters on preparation of Ti@SiO2 particles during fluidized bed chemical vapor deposition via design of experiments	49
Whey protein and maltodextrin conjugated foam-mat dried honey powder: Functional, physicochemical, structural, rheological and thermal characterization	49
Visualization experiments of a solid cylinder suspended by laminar flow	48
Review of confined swirling flows and bluff body impacts on flow and heat transfer characteristics	46
Industrial process fault diagnosis based on video recognition and multi-source information fusion	46
Dynamic characteristics of pollutant emissions from CFB boilers during periodic fire banking and start-up	46
Columns with parallel streams applied to the steam stripping of edible oils	46
Aeration model for submerged membrane bioreactor – Characterization, oxygen transfer rate, pollutant removal, and energy consumption	45
Fabrication of CFOx-PVDF catalytic membrane for removal of dyes in water and its mechanism	45
Experimental and numerical research on the coupled mechanisms of cavitation effect in a Venturi-type bubble generator	44
Pilot plant reactor for ammonia synthesis – Computational fluid dynamics analysis with experimental validation	44
Hydrodynamics and optimization of the multi-chamber fluidized bed for biomass fast pyrolysis: CFD-DEM simulation and experiment	43
Application of acoustic techniques to fluid-particle systems – A review	43
Investigation of droplet pairs’ movement under the electric field generated by matrix electrodes	43
Evaporation effects on residence time in wiped film evaporators with roller wipers	43
A hybrid drag model for studying hydrodynamics in a 2D gas-solid tapered fluidized bed	43
Preparation of high performance mixed matrix membranes by one-pot synthesis of ZIF-8 nanoparticles into Pebax-2533 for CO2 separation	43
Energy-efficient semi-continuous distillation of a ternary mixture using combined tracking-economic model predictive control	43
Intensification of industrial wastewater treatment using hydrodynamic cavitation-based hybrid ternary advanced oxidation processes	43
Upgrading of Ca(NO3)2 waste slag to aragonite nanowhiskers via a facile precipitation-transformation method for uranium adsorption	42
A comparison study on performance of thin film composite membrane embedded with graphene oxide for Acetaminophen, Diclofenac and Ibuprofen separation from waste water	42
Treatment of surfactant wastewater by foam separation: Combining the RSM method and WOA-BP neural network to explore optimal process conditions	40
Design and characterization of Kenics static mixer crystallizers	40
Continuous manufacturing based paradigm shift in pharmaceuticals production and current regulatory framework	40
Sustainable power generation from salinity gradients by reverse electrodialysis: Influence of divalent ions	40
Impact of rheology on mass transfer and bubble diameter in wastewater treatment systems	39
Direct application of chemically enhanced primary treatment in a municipal wastewater treatment plant: A case study	39
Quo vadis multiscale modeling in reaction engineering? – A perspective	39
Unary adsorption of sulfonamide antibiotics onto pozzolan-tyre ash based geopolymers: Isotherms, kinetics and mechanisms	38
Wiped film evaporator with a roller wiper and an internally mounted condenser for the recovery of TBP and n-DD from degraded PUREX solvent	38
Visualization experiment and machine learning modeling for falling-film systems	38
Engineering MgHPO4·3H2O/Mg(OH)2 composite for boosting NH3 adsorption properties	37
Study on the separation performance of a decanter centrifuge used for dewatering coal water slurry	37
2D–2D g-C3N5/Bi24O31Br10 S-scheme nanostructures with increased photocatalytic efficiency for crystal violet removal	37
A hybrid soft sensor for key product yield of FCC unit based on deep learning framework driven by data and process mechanism	37
Separation of nanoplastics from synthetic and industrial wastewater using electrolysis-assisted flotation approach: A green approach for real-time contaminant mitigation	37
Impact of cationic surfactant-coated hydrophilic nanoparticles on polymeric solution performance in chemical enhanced oil recovery (CEOR) from a two-dimensional porous medium	36

Effects of temperature, relative humidity, and sludge thickness on sludge drying characteristics and kinetic investigation	36
Kinetics of acetic acid and isoamyl alcohol liquid esterification over Amberlyst-70	36
Optimized shape design and thermal characteristics investigation of helically coiled tube type heat exchanger	36
MXene-based composite forward osmosis (FO) membrane intercalated by halloysite nanotubes with superior water permeance and dye desalination performance	36
Strategic Planning for the Biogas Supply Chain: A Life Cycle Assessment Perspective in Mexico	36
Application of dynamic flexibility index for process design improvement	35
Simulation study of heat transfer and cooling enhancement measures for slag particles in granulation chamber	35
Effect of mitigation technologies on the total cost and carbon dioxide emissions of a cement plant under multi-objective mixed linear programming optimisation	35
Integrated physical safety–cyber security risk assessment based on layers of protection analysis	35
Transient behavior of the DYNASWIRL® phase separator during cryogenics tank-to-tank transfer operations	34
Corrigendum to “A new approach to simulate the fluid dynamics in a wiped film evaporator using Modelica” [Chem. Eng. Res. Des. 161 (2020) 115–124]	34
Corrigendum to “Numerical simulation of an externally heated fixed bed reactor for coal pyrolysis based on porous media” [Chem. Eng. Res. Des. 211 (2024) 137–151]	34
Advancing produced water treatment: Scaling up EC-MF-MDC technology from lab to pilot scale	34
Design of a process for the provision of methanolic formaldehyde solutions of low water content from aqueous formaldehyde solutions	34
Gas phase behaviour in environment of fermentation processes	34
Map determination for the calculation of dispersion spectra in flowing oil-gas dispersions	33
A coupled transport model of pollutants-suspended particles in saturated porous media based on granular thermodynamics	33
Study on the characteristics of self-developed pulverized coal flow regulation valve for coal gasification process	33
Intensified gas-liquid mixing in bioreactors equipped with a dual coaxial mixer containing biopolymer solutions	33
Contents	33
Kinetics of Henry reaction catalyzed by fluorapatite	33
Effect of viscosity (or lack thereof) on the flooding point in a gassed stirred tank	33
Hydraulic investigations of standard and high performance trays in a DN1200 column	33
Improving cost estimation for compressors: Evaluating existing and proposing new comprehensive correlations	32
A study on the preparation of V2O5 from NH4V3O8 based on thermal decomposition including the thermal decomposition temperature effect, mechanism and kinetics	32
Numerical study of the effect of the inlet gas distributor on the bubble distribution in a bubbling fluidized bed	32
Modeling, simulation and design of a portable wastewater treatment plant: A new mechanistic dependent sedimentation model and computational algorithm	32
A hybrid stochastic-dynamic framework for reliable alarm generation: Integrating GMM-based probability patterns with temporal evidence fusion	32
Evaluation of the decolorization potential of azo dyes by aerobic granular sludge	32
Induction heating catalysis: Carbon dioxide methanation on deactivation-resistant trimetallic PdRe/Ni nanoconjugates with Ni-supports	31
Exploring the essential features influencing the synthesis of methylenedianiline to support industrial processes	31
Simulation of bubbly flow in loop reactors using the Eulerian-Eulerian two-fluid method: Analysis and assessment of medium-to-high liquid flow rate effect	31
Biodiesel production through non-conventional supercritical routes: Economic evaluation	31
Novel flexible model predictive control strategy to improve the yield of light products in fluid catalytic cracking unit	31
Investigation of the plenum configuration effect on the maldistribution of liquid and gas phases in upflow packed bed reactors using Gamma-ray densitometry (GRD)	30
Enable mild and efficient biodiesel esterification via a reusable sulfonic acid-functionalized ionic liquid catalyst	30
Feedback control of an experimental electrically-heated steam methane reformer	30
Investigation on methane adsorption behavior and swelling in coal: Thermodynamic characteristics and modeling	30
CFD modeling of the structured cartridges with glass-fiber catalysts	30
Exploring the efficiency of Prosopis farcta saponin as a biogenic surfactant for enhanced oil recovery from oil reservoirs: An experimental study	30
Facile synthesis of sustainable magnetic core-shell silicate nano copolymers for toxic metals extraction in fixed bed column	30
Fast, approximate method for carbon pore structure evaluation based on SF6 adsorption. Comparison with standard N2 analysis using NLDFT	29
A fusion model fault diagnosis scheme based on multibranch multiscale residual convolutional network with Transformer	29
Experimental study of viscous fingering in sand-pack model for heavy oil reservoir	29
LaCoO3/La-doped g-C3N4 heterojunctions for synergistically promoted photocatalytic degradation of enrofloxacin in an immobilized photocatalyst- polymer film-based airlift photocatalytic reactor	29
Physicochemical exploration of castor seed oil for high-quality biodiesel production and its sustainable application in agricultural diesel engines	29
Experimental optimization of wetting agents for different coal types and study of wetting mechanisms	29
Pathways for the thermally optimal design and practice of anaerobic digestion in large-scale biogas plants: Heat transfer modeling and energy analysis	29
Treatment of simulated saline brine water by membrane distillation process enhanced through alternating current electric field	29
Performance analysis of a gas cyclone with a converging-diverging vortex finder	29
Study on liquid film velocity and flow pattern transition in gas-liquid cylindrical cyclone (GLCC)	28
Facile hydrophilic chitosan and graphene oxide modified sustainable non-woven fabric composite sieve membranes (NWF@Cs/Gx): Antifouling, protein rejection, and oil-water emulsion separation studies	28
Acetone-butanol-ethanol fermentation products recovery: Challenges and opportunities	28
Reconstruction and prediction of rising bubble by Lagrange DMD in data-driven	28
Experimental study on the elution of ultrasonically coupled sodium citrate–enhanced oily sludge	28
Synthesis of ZIF-8 in high yield and simultaneous removal of Mn(II), Cu(II), and Cd(II): Performance and mechanism	28
Optimization of syngas production via methane bi-reforming using CeO2 promoted Cu/MnO2 catalyst	28
Toward predictive modeling of industrial crystallizers: A compartmental framework for coupling hydrodynamics and population dynamics	28
Review of fluoropolymer-based membranes for membrane distillation applications	28
Treatment of petroleum wastewater by electrocoagulation using scrap perforated (Fe-anode) and plate (Al and Fe-cathode) metals: Optimization of operating parameters by RSM	28
Synergistic effects between binary nonionic surfactants Span 80 and Triton X-100 in stabilizing high internal phase water-in-oil emulsions for coal slime flotation	28
CFD simulation and optimization of an energy-efficient direct contact membrane distillation (DCMD) desalination system	28
Efficient wastewater treatment in petroleum refineries: Hybrid electro-fenton and photocatalysis (UV/ZnO) process	28
Incorporating convection into the solution-diffusion framework enhances modeling accuracy in reverse osmosis	28
The discharge of complex fluids through an orifice: A review	27
Staging and path optimization of Fischer-Tropsch synthesis	27
A review of the ion exchange leaching method for extracting rare earth elements from ion adsorption clay	27
Design, simulation and investigation of the tri-generation process of fresh water, power and biogas using solar thermal energy and sewage sludge	27
Highly selective catalytic conversion of raw sugar and sugarcane bagasse to lactic acid over YbCl3, ErCl3, and CeCl3 Lewis acid catalysts without alkaline in a hot-compressed water reaction system	27
Effects of solid particle surface roughness on particle velocity fluctuation in multi-zone waste heat recovery heat exchanger	27
Comparison of light olefins production routes in China: Combining techno-economics and security analysis	27
An in-depth comparison of the ultrasonic horn and plate transducer: Building from fundamentals to applications	27
Yield enhancement and phase behaviors of cyclic peptide drug crystallization in the presence of polyethylene glycol additive	27
Experimental research of capture enhancement mechanism of submicron particles by designing two-stage electrostatic precipitators with various ratios of charger and collector units	27
Recent progress of MOF-based photocatalysts for environmental application and sustainability considerations	27
Performance optimization of adsorption hydrogen storage system via computation fluid dynamics and machine learning	27
An investigation of the critical conditions for MB desorption from activated carbon in a hydrocyclone	26
Countercurrent preferential precipitation of acidic variants from monoclonal antibody pools	26
CFD modeling using reactions kinetics for selective hydrogenation for acetylene in a fixed-bed reactor	26
Cu-Ni synergy in physicochemical properties of the Mg-Al oxides matrix to selective glycerol carbonate production	26

Mechanistic modelling in process development and intensified persulfate based oxidative degradation of simulated caffeinated wastewater: LC HRMS analysis and pathway elucidation	26
Local volumetric mass transfer coefficients in sections of multiple-impeller stirred tank reactors: Data analysis	26
Data-free stealing attack and defense strategy for industrial fault diagnosis system	26
The heat transfer characteristics of semi-molten wide sieving dilute phase particles between vertical heating surfaces	26
Recycling of resolving agent and solvent by water-based reactions and phase diagrams: Chiral resolution study of racemic ibuprofen	26
Liquid – Solid mass transfer characteristics of a heterogeneous reactor made of separated horizontal woven screens impinged by a submerged jet	26
Process development of bioactive phenolic extract from Napoleona Vogelli leaves: Optimizing ternary extraction solvent mix formulation and process parameters for techno-economic evaluation	26
Experimental research of liquid droplets colliding with solid particles in a gaseous medium	26
On the roles of interstitial liquid and particle shape in modulating microstructural effects in packed-bed adsorbers	25
Modifying the gas-oil ratio and water cut of a PVT lookup table using correlations for fluid volatility	25
A methodology for the analysis of distillation processes within rotating packed beds based on local temperature measurements	25
Comparative research of flow in tube bundle: Source term method and pressure drop method	25
The unexpected weirdness of rate-based simulation of some high-pressure column operations	25
Study on emergency plugging mechanism after BOP seal failure under UHP blowout conditions in natural gas wells	25
A pore-scale investigation of viscous coupling effect on immiscible two-phase flow in porous media	25
Prediction of zinc extraction from aqueous solution using iron oxide nanoparticles embedded formulation for tuning emulsion liquid membrane stability	25
Droplet breakup in a parallel microchannel with asymmetrical geometric constraints	25
Process simulation and evaluation of NH3/CO2 separation in melamine tail gas using deep eutectic solvent	25
Hybrid modeling and operating optimization method of oxidation process of wet flue gas desulfurization (WFGD) system	25
Molecular dynamics simulation of coalescence behavior of carbon nanoparticle	25
Separation of sodium sulfate from high-salt wastewater of lead-acid batteries	24
Modelling inter- and intra-particle mass transfer in direct lithium extraction process using packed beds filled with porous adsorbents	24
Synergism of orderly intrinsic and extrinsic proton-conducting sites in covalent organic framework membranes	24
Pipeline sharing: A supplementary strategy to enhance 3E performance of multi-product pipelines in China	24
Study on the law and mechanism of particle migration in high pressure pumping pipeline	24
Selective extraction of aromatics from residual oil with subcritical water	24
Bubbly flow simulation with particle-center-averaged Euler-Euler model: Fixed polydispersity and bubble deformation	24
Study on removal of NO from flue gas by ferrous cysteine solution and analysis of reaction process	24
Unraveling the effects of Ce/Zr molar ratio in mesoporous CexZr1−xO2 on the performance of dry reforming of methane over the supported Ni catalysts	24
Multivariable run-to-run control of thermal atomic layer etching of aluminum oxide thin films	24
Thickness distribution of decay swirl liquid film and its fluctuation characteristics in a vertical tube	24
Modeling and experimental investigation for development of Combined Electrolysis and Catalytic Exchange process for hydrogen isotope separation	24
Optimal allocation of carbon capture technologies in the electric industry under a carbon emissions trading program	24
Spray-coated tough thin film composite membrane for pervaporation desalination	23
Influence of vibration on transient flow characteristics of gas-liquid two-phase flow in inclined pipes	23
Development of an efficient downstream process for product separation and catalyst recycling of a homogeneous polyoxometalate catalyst by means of nanofiltration membranes and design of experiments	23
A high throughput approach of selecting excipients for solubility enhancement of BCS Class II active pharmaceutical ingredients for oral dosage forms	23
Selective adsorption of phosphate by 2D thin-bladed ZIF-L in phosphate mining wastewater: An investigation of single phosphorus and phosphorus-chromium composite systems	23
Synthesis of polythiophene/zeolite/iron nanocomposite for adsorptive remediation of azo dye: Optimized by Taguchi method	23
Analysis of cohesive mannitol particle mixing: A comparative study of machine learning methods	23
A novel bio-inspired structural design and optimization approach for dye liquor distributor considering flow-field uniformity	23
Computational fluid dynamics analysis of power dissipation and shear rate distribution for highly viscous and highly shear-thinning fluids in stirred tanks	23
Application of the volume of fluid method to calculate the intermaterial surface area density created in different focusing flow configurations	23
Fundamentals and applications of nanobubbles: A review	22
Numerical modelling and analysis of concentration polarization and scaling of gypsum over RO membrane during seawater desalination	22
Numerical investigation of photovoltaic performance improvement using Al2O3 nanofluid	22
A scale-up framework for aerated coaxial mixers with yield-pseudoplastic fluids	22
Application of a KOH-activated biochar for the activation of persulfate and the degradation of sulfamethoxazole	22
Investigation of methods for fuel desulfurization wastewater treatment	22
Thermal-hydraulic performance enhancement of solar receiver channel by flapped V-baffles	22
Biodegradable polymeric green adsorbent for the highly efficient removal of crystal violet dye from aqueous solution	22
Solid- and aqueous-phase approaches on zinc oxide-based photocatalytic system for degradation of plastics and microplastics: A review	22
Machine learning modeling and model predictive control of a closed-circuit reverse osmosis system	22
Tailoring interfacially polymerized thin-film composite polyesteramide nanofiltration membranes based on carboxylated chitosan and trimesoyl chloride for salt separation	22
Development of a spatially offset Raman spectroscopy probe for monitoring pharmaceutical drying	22
Underlying laws governing the saponification and crystallization separation of free lutein from marigold oleoresin	22
State-of-the-art surface patterned membranes fabrication and applications: A review of the current status and future directions	22
Feature-based scenario clustering and selective degrees of freedom reduction for two-stage stochastic optimization of Power-to-Methanol	22
A hybrid CFD – Deep learning methodology for improving the accuracy of pressure drop prediction in cyclone separators	22
Influence of ternary hydrophobic eutectic solvents on liquid-liquid phase behavior of mixture p-Cresol+Water	22
A dynamic assessment method for risk evolution in chemical processes based on MFM-HAZOP-FDBN	22
Production of biocrude oil through hydrothermal liquefaction of palm empty fruit bunch with ethanol co-solvent: A source of value-added chemicals	21
Phase transformations of Langkawi ilmenite ore during carbothermal reduction using palm char as renewable reductant	21
Linear regression model of structured column packing form factor	21
Thermo-kinetic assessment of direct cellulose conversion to ethyl levulinate using Brønsted-Lewis acidic ionic liquid	21
Using supercritical CO2 for preparation of Pd supported on SiO2: Phase equilibria data and supercritical fluid deposition technique	21
Effects of key structure parameters on flow field and sensitivity analysis for a bubble separator in MSR	21
Application of ultra-fine particles of potato as eco-friendly green additives for drilling a borehole: A filtration, rheological and morphological evaluation	21
Construction of Z-scheme Fe3O4/BiOBr/BiOI heterojunction with magnetically recyclable for enhanced photocatalytic reaction activity	21
Nonlinear analysis of bed density fluctuation characteristics in gas-solid fluidized bed using micron-scale composite dense medium	21
Predicting liner wear of ball mills using discrete element method and artificial neural network	21
Numerical study on a new separator for downhole gas-liquid separation	21
An experimental study on the role and contribution of the first normal stress difference and elongational viscosity in immiscible viscoelastic Saffman-Taylor instability	21
Developing an integrated and collaborated evaluation index system for crude oil supply chains: A case study from China	21
Inside Front Cover	21
Encrypted decentralized model predictive control of nonlinear processes with delays	20
A comprehensive study of calcium dissolution kinetics from recycled concrete fines: Experimental and modeling insights	20
Inside Front Cover	20
Solution of the population balance equation for wet granulation using second kind Chebyshev polynomials	20
Integrating run-to-run control with feedback control for a spatial atomic layer etching reactor	20
Magnetic dual-template molecularly imprinted polymers for separation and enrichment of echinacoside and acteoside from Cistanche deserticola Y. C. Ma	20
Compression and consolidation characteristics analysis of waste tire powder bed during gas pressurization	20
A framework for systematic crystal shape tuning – Case of Lovastatin's needle-shaped crystals	20
Lecithin as an ecofriendly amphoteric collector foaming agent for the reverse flotation of phosphate ore	20
Development and optimization of a novel industrial process solution for stripping of carbon dioxide and ammonia from bio-process wastewater	20
Full-period operation optimization of the semi-regenerative reactor based on dehydrogenation reaction and deactivation kinetics	20
Contents	20
Activated carbon manufacturing via alternative Mexican lignocellulosic biomass and their application in water treatment: Preparation conditions, surface chemistry analysis and heavy metal adsorption p	20
Perspectives on green fabrication and sustainable utilization of adsorption materials for wastewater treatment	20
Obituary: In memory and honour of Alvin Nienow	20
Morphology predictions in molded parts: a multiphysics approach	20
Experimental and numerical studies of the processes of spraying coal-water slurries with pneumatic nozzle	20
Thermochemical hydrogen production from biomass via the water gas shift reaction and its purification: A review	20
Data-driven moving horizon state estimation of nonlinear processes using Koopman operator	20
The complementary relationship between Ru/Al2O3 and Ni/Al2O3 catalyst for dry reforming of methane	20