Materials & Design

Article	Citations
Enhanced solid solution hardening by off-center substitutional solute atoms in α-Ti	1346
Enantioselective theranostics of brain glioma using chiral quantum structures	561
Powder injection molded ceramic scaffolds: The role of pores size and surface functionalization on the cytocompatibility	400
A quantification study of hydrogen-induced cohesion reduction at the atomic scale	340
On the process of designing material qualification type specimens manufactured using laser powder bed fusion	330
Oriented co-continuous 3D porous scaffolds with inhibited activating functionality: An effective strategy to inhibit the hyperactivation of astrocytes	320
Sandwich-structured graphene composite sponge with multiple cyclic compression for waste liquid treatment under dynamic electrical stimulation response	305
Location of cobalt impurities in the surface oxide of stainless steel 316L and metal release in synthetic biological fluids	192
Processability improvement of laser-assisted micro-machining 95W-3.5Ni-1.5Fe alloy based on surface and subsurface characteristics	185
Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation	176
High-efficient heat flux manipulation of micro-scale thermal metamaterials with facile functional unit design	170
Data-driven distortion compensation for laser powder bed fusion process using Gaussian process regression and inherent strain method	166
Introducing a new heterogeneous nanocomposite thin film with superior mechanical properties and thermal stability	148
Regulation of microstructure and physical properties of Tb-Dy-Fe-Cu alloys by doping with transition elements	139
Light-adaptable artificial iris with dynamically scalable pupil-aperture function by radially patterned photochromic transition control	136
Rapid surface preparation for three-dimensional characterization of defect and microstructure of metal additive manufacturing using electrochemical jet	136
Corrigendum to “A solid–liquid interface enhancement algorithm for X-ray in situ observation of space materials” [Mater. Design 228 (2023) 11852]	136
Comparison of hydrogen resilience of three different corrosion-resistant martensitic steels	133
Effect of SiC on the antioxidant properties of Al-containing composites Ti3SiC2/SiC and its oxidation mechanism analysis	133
3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks	132
Creation of submicron-scale metal oxide speckle patterns on single carbon fibers by a thermodynamically and kinetically controlled nonequilibrium process	130
Pore space of steatite ceramics triggered by the allowance of natural fibers: High-resolution X-ray microscopy analysis and related thermo-mechanical properties	125
High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects	124
Deep-learning approach for predicting crystalline phase distribution of femtosecond laser-processed silicon	123
Cell penetrating peptide modified M2 macrophage derived exosomes treat spinal cord injury and rheumatoid arthritis by loading curcumin	123

Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing	121
Gelatine methacrylamide-based multifunctional bilayer hydrogels for accelerating diabetic wound repair	120
Grain boundary and particle interaction: Enveloping and pass-through mechanisms studied by 3D phase field crystal simulations	120
Characterization of micro-ZnO/PDMS composite structured via dielectrophoresis – Toward medical application	119
Preparation and application of aramid nanofiber via carbodiimide assisted polymerization	116
Atomic-scale investigation of creep behavior and deformation mechanism in nanocrystalline FeCrAl alloys	113
Improved thermal shock reliability of Ag paste sintered joint by adjusted coefficient of thermal expansion with Ag-Si atomized particles addition	113
Energy absorption of sandwich structures with a kirigami-inspired pyramid foldcore under quasi-static compression and shear	112
Quantitative mixed-valence state identification of metal ions based on fluorescence response of graphene quantum dots	112
An accelerated creep assessment method based on inelastic strain partitioning and slow strain rate testing	111
Multifunctional upconversion nanocomposite for multi-purpose cancer theranostics	111
New kink-band formation mechanism discovered in Zn-Al alloy with mille-feuille microstructure	109
Advances, optical and electronic applications of functional materials based on rare earth sulfide semiconductors	108
Green and facile fabrication of high-performance antibacterial nanofiber materials with low cytotoxicity using eggshell membrane hydrolysate	107
Bilayer-functionalized mesoporous silica nanoparticles for overcoming multiple barriers of mucus clearance, intestinal epithelium and P-glycoprotein efflux	106
The design optimization of nanostructured hierarchical electrodes for solid oxide cells by artificial impregnation	106
“Fire-beetles” inspired all-solid infrared sensor with bolometric and photomechanic dual sensing modes	106
Porous titanium layer co-immobilized with bone morphogenetic protein-2 and vancomycin for biofunctionalization of ultra high molecular weight polyethylene	104
The effect of pre-existing voids on solder reliability at different thermomechanical stress Levels: Experimental assessment	103
A PTHrP-2 loaded adhesive cellulose acetate nanofiber mat as wound dressing accelerates wound healing	102
Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing	102
Machine learning and Python assisted design and verification of Fe–based amorphous/nanocrystalline alloy	101
3D printed hydroxyapatite – Zn2+ functionalized starch composite bone grafts for orthopedic and dental applications	101
4D printing of shape memory inferior vena cava filters based on copolymer of poly(glycerol sebacate) acrylate-co-hydroxyethyl methacrylate (PGSA-HEMA)	100
CuFeS2 nanozyme regulating ROS/GSH redox induces ferroptosis-like death in bacteria for robust anti-infection therapy	99
Dimensionless unified modelling of macroscale electric properties of conductive fibre networks in different regimes	98
Micro-cantilever bending tests for understanding size effect in gradient elasticity	96
Explainable machine learning for predicting the mechanical properties in bainitic steels	96
Densifying hydration products of alite by a bio-inspired admixture	95
On the design of a piezoelectric self-sensing smart composite laminate	95
Multi phenomena melt pool sensor data fusion for enhanced process monitoring of laser powder bed fusion additive manufacturing	94
Enhanced drug release from a pH-responsive nanocarrier can augment colon cancer treatment by blocking PD-L1 checkpoint and consuming tumor glucose	92
Biomimetic VEGF-loaded bilayer scaffold fabricated by 3D printing and electrospinning techniques for skin regeneration	92
Coupled effect of microstructure and topology on the mechanical behavior of Inconel718 additively manufactured lattices	92
Evolutionary characteristics of microstructural hydration and chloride diffusion in UHPC	92
Fabrication of self-supporting structures made of washcoat materials (γ-	92
Strategies to enhance photocatalytic activity of graphite carbon nitride-based photocatalysts	91
Magnetostrictive bulk Fe-Ga alloys prepared by selective laser melting for biodegradable implant applications	91
Development of dynamic pH and temperature-responsive smart membranes via immobilization of chitosan-graft-poly(N-isopropylacrylamide-co-methacrylic acid) hydrogels on microfiltration membrane-support	91
Superior fracture toughness with high yield strength in a high-Mn steel induced by heterogeneous grain structure	90
Improving thermal/electrical properties of silicone rubber nanocomposite using exfoliated boron nitride nano sheets made by an effective/novel exfoliating agent	89
Recent advances in the structure and biomedical applications of nanodiamonds and their future perspectives	89
Carrier-free poly(glycyrrhetinic acid)-facilitated celastrol-loaded nanoparticle for high-efficiency low-toxicity treatment of rheumatoid arthritis	89
Surface modification of ultra-high molecular weight polyethylene fibers by an eco-friendly impregnation solution to enhance interfacial adhesion with rubber	88
Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite	88
Analyzing time series of serrated flow and the dependence on structural heterogeneity in Al-Mg-Sc alloy	86
Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing	86
Joining of additively manufactured fiber-reinforced thermoplastic and metals by ultrasonic energy: Mechanical and corrosion behavior	84
Multifunctional mechanical metamaterials with tunable double-negative isotropic properties	83
A novel natural polysaccharide dissolving microneedle capable of adsorbing pus to load EGCG for the treatment of acne vulgaris	83

Design methodology of the Ni50Ti50 shape memory alloy beam actuator: Heat treatment, training and numerical simulation	82
Excellent mechanical properties of a novel double-diagonal reinforced mechanical metamaterial with tunable Poisson’s ratios inspired by deep-sea glass sponges	82
Thermal conductivity of low-density micro-and nanocellular poly(methyl-methacrylate) (PMMA): Experimental and modeling	82
Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis	80
Broadband inverted T-shaped seismic metamaterial	79
Remote eradication of delayed infection on orthopedic implants via magnesium-based total morphosynthesis of biomimetic mineralization strategy	79
Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules	78
Probing the atomic-scale origins of anti-friction and wear-resisting in graphene-coated high-entropy alloys	77
Multiplexed detection of SARS-CoV-2 based on upconversion luminescence nanoprobe/MXene biosensing platform for COVID-19 point-of-care diagnostics	76
Construction of antibacterial photothermal PCL/AgNPs/BP nanofibers for infected wound healing	76
Compressive stress improves mechanical properties of mineralized collagen by dynamically regulating its mineralization - a closed-loop regulation mechanism	74
Mechanical properties and microstructure of wire laser metal deposited austenitic stainless steel	74
Crashworthiness analysis of gradient hierarchical multicellular columns evolved from the spatial folding	74
Accelerating autonomic healing of cementitious composites by using nano calcium carbonate coated polypropylene fibers	74
Study on the melting and sintering behavior of Cu-Fe mixed nanoparticles based on molecular dynamics simulations	74
Suspended few-layer GaS photodetector with sensitive fast response	73
Delay optimisation of Gradient-Doped Nd: YAG laser ceramics via active mixing of Direct ink writing	73
Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy	73
Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing	73
Study on interfacial healing mechanism of a Ni-Co base dual-phase superalloy during hot-compression bonding	72
Towards an instant structure-property prediction quality control tool for additive manufactured steel using a crystal plasticity trained deep learning surrogate	72
Dual-radical generating FePEIDN nanocomposite for tumor therapy: Sulfite radical persistence meets Fenton catalysis	72
Innovative crosslinking and foaming Strategies for Advancing biodegradable composite foams: Enhancing Foamability, Flexibility, and thermal insulation	71
Electromagnetic stealth technology: A review of wave-absorbing structures	71
Mechanisms of external magnetic field influence on electrical discharge machining of SiCp/Al composites	70
Learning the non-proportional multiaxial elastic–plastic response of an aluminium alloy with neural networks	70
Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition	70
Laser intensity profile as a means to steer microstructure of deposited tracks in Directed Energy Deposition	69
Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V	69
Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: An in-situ study	69
Modeling the mechanical properties of polypropylene/lignin/flax hybrid composites	69
Heat-resistant aluminum alloy design using explainable machine learning	69
Strategy of complex carbides in microalloyed 4Mn steels processed by quenching and austenite reversion	69
Microstructure dependent burst behavior of oxide dispersion–strengthened FeCrAl cladding	69
Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response	68
Design, fabrication, and characterization of novel dental implants with porosity gradient obtained by Selective Laser Melting	68
Tailoring the strength of inconel 718: Insights into LPBF parameters and heat treatment synergy	68
Achieving high strength, plasticity and conductivity in Cu/Cu-graphene oxide laminated composites with extremely low content of graphene oxide	67
Interfacial adhesion between dissimilar thermoplastics fabricated via material extrusion-based multi-material additive manufacturing	67
Mitochondria-targeted and pH-triggered charge-convertible polymeric micelles for anticancer therapy	66
The energy absorption capacity of a novel dual-sub-fold Miura foldcore subjected to axial crushing	66
NiTiNb shape memory alloys fabricated via the reactive sintering of elemental powders: Microstructures, transformation behaviors and compressive properties	65
Self-standing three-dimensional porous NiO/Ni anode materials for high-areal capacity lithium storage	65
The effects of tungsten content on the mechanical behavior, ignition and energy-release characteristics of short-tungsten-fibers/Zr-BMGCs under dynamic loading	65
Quantification of micro-damage evolution process in ceramics through extensive analysis of multi-source heterogeneous data	65
Novel Ni–Co-based superalloys with high thermal stability and specific yield stress discovered by directed energy deposition	65
Property prediction and crack growth behavior in cold sprayed Cu deposits	65
Biomimetic aminoated mesoporous silica xerogel exhibiting chiral surface topology for delivery insoluble drug with multiple-controlled manners and improved oral adsorption	65
Design and facile manufacturing of tri-layer laminated polyolefin microfibrous fabrics with tailoring pore size for enhancing waterproof breathable performance	64
Rapid and ultrasensitive detection of SARS-CoV-2 spike protein based on upconversion luminescence biosensor for COVID-19 point-of-care diagnostics	63
Ultrafast laser-induced topochemistry on metallic glass surfaces	63
Fabrication of microgroove poly(lactic-co-glycolic acid) nerve guide conduit using dry-jet wet spinning for rat laryngeal recurrent nerve regeneration	63
Synthesis and growth mechanism of highly crystalized multi-branched HfB2 microrods with self-toughening effect	63
Reducing out-of-band radar cross-section of metasurface-based radome composites via beam-scattering mechanism	63
Editorial Board	63
Cover_244	63
Effect of twin-wire feeding methods on the in-situ synthesis of electron beam fabricated Ti-Al-Nb intermetallics	63
Active interlocking metasurfaces enabled by shape memory alloys	62
Micro-arranged ZnO particles and conductive fillers in PCL composites for enhanced piezoelectric and dielectric properties in bone tissue engineering applications	62
Mechanism model of dynamic polyurethanes with two scales of nodes to regulate mechanical property	62
Fucoidan-based coating on magnesium alloy improves the hemocompatibility and pro-endothelialization potential for vascular stent application	61
Control of residual stress in inter-layer hammering hybrid arc-based directed energy deposition manufacturing of cross-structure based on finite element method	61
Generating 3D porous structures using machine learning and additive manufacturing	60
Modifying microstructure and mechanical properties of twin-wire directed energy deposition-arc (TW-DED-arc) fabricated Ti-48Al-2Cr-2Nb alloy via ultra-high frequency pulsed (UHFP) current	60
Technical basis of using laser direct energy deposition as a high-throughput combinatorial method for DC-cast Al-Mn alloy development	60
Cryoprinting of nanoparticle-enhanced injectable hydrogel with shape-memory properties	60
Tuning surface curvatures and young's moduli of TPMS-based lattices independent of volume fraction	59
Static assessment of flawed thin AlSi10Mg parts produced by Laser Powder Bed Fusion	59
Enhanced thermal conductive and moisturizing hydrogels by constructing 3D networks of BN-OH and CNT-OH in alignment for burn therapy	59
Revealing the governing factors for long-term radiation damage evolution in multi-principal elemental alloys through atomistically-informed cluster dynamics	59
Long term curl of printing paper due to ink solvent migration	58
Improving photodetection performance of ReS2@Ti3C2 composite by efficient charge transportation	58
Design and fabrication of cascade novel Fenton catalytic nanocomposite as theranostic agent for chemodynamic/photothermal synergistic tumor therapy	58
A dual-functional nanomedicine combining fluorinated antisense oligonucleotide with chemotherapeutic drug for synergistic gene-chemo tumor treatment	58
Modelling and measurements of thermally induced residual stress in IN718 nickel-based superalloy during non-uniform quenching	58
Thermal safety model of HMX-based explosives in diamond turning	58
Smooth or not: Robust fused silica micro-components by femtosecond-laser-assisted etching	58
Cobalt ferrite/cellulose membrane inserted catalytic syringe filter for facile in-situ filtration/degradation of emerging organic pollutants in water via activating peroxymonosulfate	58
Triple Pseudo-Siamese network with hybrid attention mechanism for welding defect detection	57
Atomic-scale insights into ω-variants in Galfenol triggered by displacive-diffusive transformation	56

Quantifying chemical fluctuations around medium-range orders and its impact on dislocation interactions in equiatomic CrCoNi medium entropy alloy	56
Surface effects of molten slag spills on calcium aluminate cement paste	56
On the measurement of piezoelectric d33 coefficient of soft thin films under weak mechanical loads: A rapid and affordable method	56
Preface – Joint special issue on nanomechanical testing in materials research and development VIII	56
Molding quality control with nonlinear forming method in 3D cement printing	56
Investigation of tensile deformation behavior of a TWIP/TRIP metastable β titanium alloy at typical temperature part Ⅰ: Room temperature	56
Cover_242	56
Microstrain-range giant piezoresistivity of silicon oxycarbide thin films under mechanical cyclic loads	56
Cover_220	55
Mechanical Properties of Semi-Regular Lattices	55
“Fatigue-Crack Propagation Behavior in Microcapsule-Containing Self-Healing Polymeric Networks”	55
Tumor microenvironment/NIR-responsive carbon monoxide delivery with hollow mesoporous CuS nanoparticles for MR imaging guided synergistic therapy	55
Effect of rare earth element on amorphization and deformation behavior of crystalline/amorphous dual-phase Mg alloys	55
Ultrafast formation of single phase B2 AlCoCrFeNi high entropy alloy films by reactive Ni/Al multilayers as heat source	55
Corrosion behavior of Si-18at%Y alloy in air/water-oxygen environment	55
Addition of niobium in Fe-13Cr-4.5Al-2Mo alloy used as ATF cladding: Effect on high temperature water corrosion and in-situ electrochemistry	55
Additive, subtractive and formative manufacturing of glass-based functional micro/nanostructures: A comprehensive review	55
In-situ monitoring of multi-physical dynamics in ceramic additive manufacturing	55
Fucoidan-loaded, neutrophil membrane-coated nanoparticles facilitate MRSA-accompanied wound healing	55
Sustainable gambogic acid release via pH/Redox Dual-Responsive C60-Modified magnetic mesoporous nanospheres for antitumor therapy	55
Enhanced strength–ductility synergy of SiC particles reinforced aluminum matrix composite via dual configuration design of reinforcement and matrix	54
Stress corrosion and interaction behaviour of adjacent cracks in rock-like material under hydro-mechanical Coupling: An experimental and numerical study	54
Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism	54
Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy	54
Construction of methylene blue embedded core–shell-satellite structured Au@Ag nanorods@SiO2@Au nanocomposites for synergistic therapy of cancer	54
Electrically assisted stereolithography 3D printing of graded permittivity composites for in-situ encapsulation of insulated gate bipolar transistors (IGBTs)	54
Melt-Electrowritten Poly(L-lactic acid)- and Bioglass-Reinforced biomimetic hydrogel for bone regeneration	54
Fabrication of breathable superhydrophobic composite fabric with moisture permeability and weak-electric-field bactericidal ability designed for protective clothing applications	54
Exploring the brittle-to-ductile transition and microstructural responses of γ	53
Superior hemostatic and wound-healing properties of tetrastigma polysaccharide	53
Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression	53
Au-Pt heterostructure cocatalysts on g-C3N4 for enhanced H2 evolution from photocatalytic glucose reforming	53
Elucidating the impact of severe oxidation on the powder properties and laser melting behaviors	53
Exploring the design space of the effective thermal conductivity, permeability, and stiffness of high-porosity foams	53
Facile synthesis of Ag nanoparticles/Ti3C2Tx/polyacrylamide composite hydrogel as efficient catalyst for methylene blue and 4-nitrophenol reduction	52
Magnetic-responsive materials tailored to enhance the cascade of bone regeneration and immune response	52
Designing Nd-doped bismuth selenide nanosheets with boosted photothermal conversion for imaging guided cancer therapy	52
Effect of intentional chemical doping on crystallographic and electric properties of the pyrochlore Bi2Sn2O7	52
Review on perovskite silicon tandem solar cells: Status and prospects 2T, 3T and 4T for real world conditions	52
3D printed lightweight metastructure with microwave absorption and mechanical resistance	52
Device level assessment of Ni and Ni45Cu55 as electrodes in Mg2(Si,Sn)-based thermoelectric generators	51
Extreme high accuracy prediction and design of Fe-C-Cr-Mn-Si steel using machine learning	51
Natural polyphenol-loaded cross-linked lipoic acid vesicles treat triple-negative breast cancer by cancer cell killing and metastasis inhibition	51
New perspectives on structural parameters and hydrophobic model inspired by a superhydrophobic Cu cone-flower coating	51
Thermoregulating textiles and fibrous materials for passive radiative cooling functionality	51
One-step fabrication of multiphasic Janus microparticles with programmed degradation properties based on a microfluidic chip	51
Synergistic water-driven shape memory performance and improving mechanism of grading photo-thermal curing shape memory composite	51
Influence of intermetallics and element concentrations on the performance of the heat treated HVDC AlSiMgMnCu alloys at nano-scale	51
ALDS: An active learning method for multi-source materials data screening and materials design	51
Microstructure of NiAl-Ta-Cr in situ alloyed by induction-assisted laser-based directed energy deposition	51
Effects of adding zeolite particles on the hierarchical microstructure of zeolite-geopolymer composites and their Sr2+ adsorption properties	51
Twinned dendrites growth in wire arc directed energy deposition of Al-Zn-Mg-Cu alloy	50
A “biomimetic bone-magnet” with suitable mechanical properties concurrently performs accurate target collection of nanoparticles for magnetothermally driven osteosarcoma thermo-chemotherapy	50
Optimization of composite extrusion modeling process parameters for 3D printing of low-alloy steel AISI 8740 using metal injection moulding feedstock	50
Interfacial reconstruction of 2D/2D ZnIn2S4/HNb3O8 through Nb-S bonds for efficient photocatalytic H2 evolution performance	50
Rapamycin incorporating hydrogel improves the progression of osteoarthritis by inducing synovial macrophages polarization and reducing intra-articular inflammation	50
On the stability of coherent HfRu- and ZrRu-B2 precipitates in Nb-based alloys	50
Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering	50
Microstructural characteristics with process-microstructure-property relations during high-frequency ultrasonic vibration-assisted cutting of metallic material	50
A new insight on the corrosion behavior and mechanism of martensitic steel	50
Microwave driven synthesis of narrow bandgap alpha-tin nanoparticles on silicon	50
The current state of CuCrZr and CuCrNb alloys manufactured by additive manufacturing: A review	49
A novel flexible, conductive, and three-dimensional reduced graphene oxide/polyurethane scaffold for cell attachment and bone regeneration	49
Atomic study on phase transformation of the strengthening phase in a die-casting Mg–Al–La alloy via an intermediate phase	49
Development of the γ′ phase strengthened high-temperature high-entropy alloys with excellent mechanical properties	49
Ferroelectric heterostructure nanocomposites based on Bi2MoO6 nanosheets and Bi2S3 nanorods for rapid piezocatalysis of organic dyes and antibiotics	49
Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity	49
Unveiling the enhancing mechanism of cyclic stability in Tb doped Ni-Mn-Sn Heusler alloys	49
Fabrication of 1000-Line/mm orthogonal grating for Micro-Deformation field mapping	48
Multispectral metasurface for visible transparency, infrared stealth, and mm-Wave frequency-multiplexing	48
Investigation on microstructure heterogeneity of the HPDC AlSiMgMnCu alloy through 3D electron microscopy	48
PiezoSight: Coupling vision based tactile sensor neural network processing and piezoresistive stimulation for enhanced piezo-vision hybrid sensing	48
3D-printed prosthetic foot design: Mechanical similarity and testing	48
Hybrid flexible dressings with rapid gelation promote healing of difficult-to-treat infected wounds	48
3D bioprinting advanced biomaterials for craniofacial and dental tissue engineering – A review	47
Grain refinement mechanisms of alloying molybdenum with carbon manufactured by laser powder bed fusion	47
Nano-in-micro alginate/chitosan hydrogel via electrospray technology for orally curcumin delivery to effectively alleviate ulcerative colitis	47
Simultaneously improved strength and ductility of low-cost Ti-Al-V-Fe alloy with TiB2 addition and thermomechanical processing	47
Plastic deformation mechanism and hardening mechanism of rolled Rare-Earth magnesium alloy thin sheet	47
A chitosan-based hydrogel sealant with effective closure for sutureless dural	47
Tuning superior hydrophobic performance of Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) via polydimethylsiloxane-based bulk modification	47
Robust, scalable and fluorine-free superhydrophobic anti-corrosion coating with shielding functions in marine submerged and atmospheric zones	47
Corrigendum to “The effect of mold pressing pressure and composition on properties of nanocomposite bipolar plate for proton exchange membrane fuel cell” [Mater. Design 32(7) (2011) 3883–3892]	46
Machine learning assisted design of high-entropy alloys with ultra-high microhardness and unexpected low density	46
Compressive behavior assessment of a newly developed circular cell-based lattice structure	46
A skeletonization based image segmentation algorithm to isolate slender regions in 3D microstructures	46
Biomimetic collagen composite matrix-hydroxyapatite scaffold induce bone regeneration in critical size cranial defects	46
Microstructure and composition evolution of SPPs in the oxide film of Zr-1.0Sn-0.25Nb-0.2Fe-0.1Cr during corrosion	46
A universal strategy for flexible, efficient and programmable crashworthiness under quasi-static and dynamic loadings based on plastic deformation of metals	46
On sustainable design and manufacturing for the footwear industry – Towards circular manufacturing	45
Bioconversion of food waste to biocompatible wet-laid fungal films	45
Tailoring plastic deformation of metallic architected materials toward multi-stage energy dissipations	45
Corrigendum to “Tribological behavior and biocompatibility of novel nickel-free stainless steel manufactured via laser powder bed fusion for biomedical applications” [Mater. Des. 242 (2024) 113013]	45
Hybrid fibre-reinforced cementitious composites with short polyethylene and continue carbon fibres: Influence of roving impregnation on tensile and cracking behaviour	45
Ultrafast electrohydrodynamic 3D printing with in situ jet speed monitoring	45