Particulate Science and Technology

Article	Citations
Capsicum baccatum (Andean Chilli)-assisted phytosynthesis of silver nanoparticles and their H2O2 sensing ability	89
The effect of physical properties of pond ash as a partial replacement of sand in the mortar mix	34
Geotechnical studies on cemented and untreated Behshahr loess and Amol clay of Iran	28
Unreacted shrinking core model for non-catalytic ammonia storage in metal amine particle	27
Role of shape on the forces on an intruder moving through a dense granular medium	23
Numerical modelling and experimental validation of an Enhanced multi-force model of free-fall electrostatic separators	22
Economic particulate transport performance analysis of k-epsilon models in highly concentrated slurry through pipelines	20
Investigation of catalytic efficiency of nanoparticles of alloys on thermal behavior of AP and AP-based solid propellants	19
Revisiting the enhanced performance in coal gasification fly ash coal flotation by combined grinding process and nano-mixed collectors	15
Effect of charge on the concentration decay and size growth of PAO aerosol in a closed chamber in different charged conditions	15
Research progress of supergravity technology and its application in mineral separation	15
A study on a new blended tea product using disk granulation	15
Characteristics of zinc oxide/activated carbon composites and their degradation of carbon dioxide in the gas phase	14
Prediction of average shape values of quartz particles by vibrating disc and ball milling using dynamic image analysis based on established time-dependent shape models	12
Experimental study of the collection efficiency of three configurations of blades-plates-type electrostatic precipitators	12
Segregation of binary particles in pulsed gas-solid fluidized bed	11
Wavelet multi-scale analysis on particle dynamic characteristics of the vertical tubes in a horizontal-vertical pneumatic conveying system	11
Optimization of latent fingerprint identification using particle size control and fluorescence of trans-resveratrol powder	11
Investigation of force transmission, critical breakage force and relationship between micro-macroscopic behaviors of agricultural granular material in a uniaxial compaction test using discrete element	10
Prediction of shear strength for granular material under the effect of liquid-powder binder using a PSO–RBF neural network model	10
Simulation of coarse particle group motion characteristics in magnetic roll separator based on EDEM-Maxwell coupling	10
Thermal performance of nanofluids in elliptical zigzag tube: a numerical approach	10
A decision support system for predicting settling velocity of spherical and non-spherical particles in Newtonian fluids	10
Electrostatic separation process of metal/plastic granular mixtures using a horizontal rotating disk	9
Ejector diluter behavior assessment and dilution factor accuracy improvement	9

Silver nanoparticle production mediated by Goniothalamus wightii extract: characterization and their potential biological applications	9
Impact of titanium and silicon metal oxide nanoparticles on surface coatings for marine vehicles to mitigate biofouling	9
Calibration of discrete element microparameters of coal based on the response surface method	9
Optimized aggregate height measurement by laser with nonlinear fitting	8
Adsorptive removal of antipsychotic drug by carbon nanofibers in a batch and fixed bed column system	8
Flow behavior of magnetic steel powder	8
Designing and evaluation of dermal targeted combinatorial nanostructured lipid carrier gel loaded with curcumin and resveratrol for accelerating cutaneous wound healing	8
Effects of HPGR products of mixed magnetite-hematite on subsequent grinding	8
Determination of steady-state for continuous powder mixing: Analysis of mixture properties and signal processing	8
Fine material filtration using conventional pressure and steam pressure: a relationship between filter cake height to crack formation and residual moisture content	8
Simulation and analysis of the flow field for a new type of dust isolation and dust collection device in the comprehensive excavation face	8
Green synthesis of silver nanoparticles using Macrolepiota procera extract and investigation of their HSP27, HSP70, and HSP90 inhibitory potentials in human cancer cells	8
Novel CFD-DEM approach for analyzing spherical and non-spherical shape particles in spouted fluidized bed	8
Modeling operational cement rotary kiln variables with explainable artificial intelligence methods – a “conscious lab” development	8
Morphological analysis of nanoparticle agglomerates generated using DEM simulation	8
An experimental investigation into sifting and fluidization segregation characteristics for coal fly ash	7
Effect of blade configuration on the mixing process of particles in an intensive mixer	7
Nano-dimensional gold synthesis for biomedical applications: upscaling and challenges	7
Green synthesis of silver nanoparticles using Schizophyllum commune and Geopora sumneriana extracts and evaluation of their anticancer and antimicrobial activities	7
Phytofabrication of silver and zinc oxide nanoparticles using the fruit extract of Phyllanthus emblica and its potential anti-diabetic and anti-cancer activity	7
Some aspects on grindability of feldspar ore using ball mill	6
Parameter calibration of maize based on discrete element simulation	6
Studying the effect of shear induced lift on the transport behavior of solid particles in an inclined channel using 2D segregation-dispersion model	6
Experimental and simulation investigation on diffusion and deposition of transient high-temperature dust in a vertical tee duct	6
Study on particle cluster behavior in the multistage circulating fluidized bed	6
Adsorption of nickel from aqueous solutions by natural and acid-activated nano-structured bentonite	6
DEM simulation of dumbbell shaped particles under vertical vibration	6
CFD simulation on internal flow field of typical hydrocyclone for coal and development of novel hydrocyclone	6
Fabrication of ROS-responsive docosahexaenoic acid (DHA)-clacked star-shaped dendrimer nanoparticles for blood-brain barrier (BBB)-target ischemic stroke therapy and nursing care	6
Granular LCM migration and plugging behavior in shear-slip fractures	6
Direct numerical simulation of fluid/solid particles flow inside a channel	6
Terminal settling velocity of the binary solid mixture in the non-Newtonian pseudoplastic liquid system	6
DEM simulation of impact charge on polymer particles by single and repeated impact on different metal plates	6
Dust-removal performance of an improved spherical cylindrical ECP under magnetic confinement effect	5
Diffusion separation of submicron particles by using magnetized spheres	5
Synthesis and characterization of magnetic nanoparticles functionalized with different starch types	5
Regularities of particle motion on vibrating conveyor	5
Study on the morphological characteristics of coal particle flocs under fractal theory	5
Cleaning high ash coal waste from coking coal via froth flotation method	5
Bubble hydrodynamics of adding fine particles in 2D pulsed fluidized bed	5
Enhancing lymphatic uptake of Darunavir Ethanolate through TPGS-enriched lipid nanocarriers for oral delivery	5
Experimental investigation on enhancing solid–liquid two-phase mixing efficiency in a stirred vessel by eccentric-stirring with variable speeds	5
The effect of JKR surface energy on the flowing property of fresh concrete in DEM simulation	5
Biomedical potential of silver nanoparticles capped with active ingredients ofHypnea valentiae,red algae species	5
Experimental investigation on the motion of a single plug and its constituent particles in a horizontal pneumatic pipeline	4
Study on the conductivity of quartz sand proppant	4
Experimental study on rotary triboelectric separation of low-rank coal macerals with surface modification	4
Negative impact of humidity on the flowability of steel powders	4
Study on the performance of electrostatic agglomeration enhances magnetic filter material for filtering fugitive particles in the iron and steel industry	4
CFD-DEM simulation of fluidization of multi sphere-modeled corn particles	4

Design and evaluation of sustained-release lipid-PLGA hybrid nanoparticles for enhanced anticancer efficacy of 5-fluorouracil	4
Adsorptive removal of Congo red by macroporous ZnO obtained from citrus pectin gelation and reuse as a hybrid pigment	4
Effect of ash-bridge deposition in asymmetric diesel particulate filter channels on the pressure drop and particulate matter trapping characteristics	4
A multiparametric study for size and stability of hybrid Fe 2 O 3 -NiO nanoparticles and their statistical transformation	4
Gas–solid two-phase erosion of multi-elbow relief line under supercritical condition	4
Impacts of nano-fluid on the dynamical and transitional behaviors of Rayleigh Bénard convection	4
Construction of a magnetic-float composite force field separator and its application in the separation of magnetite	4
Fabrication of glucose-immobilizing fluorescent polymer particles with high magnetic responsiveness	4
Numerical simulation of nonlinear flow and energy dynamics through spinning flow of Casson hybrid nanofluid past an extending surface	4
Experimental study of particle-laden turbulent reacting flow in a swirl combustor	4
Study on wind speed and dust distribution in high-altitude tunnels under different air humidity conditions	4
Study on the screening performance and parameter optimization of linear vibrating screen under the influence of sieve plate airflow	4
Importance of WCFC particle on the mechanical and tribological performance of flax/hemp epoxy composite	4
Influence of bubble size on performance of apatite flotation of different particle sizes	4
Enhancing selective dissolution of manganese by mechanochemical process for iron ore upgrading	4
Bactericidal and photocatalytic degradation of methyl orange of silver-silver chloride nanoparticles synthesized using aqueous phyto-extract	4
A new design approach for the acceleration region of vertical, dilute-phase pneumatic conveyors	3
Synthesis and characterization of MWCNTs/Al6082 nanocomposites through ultrasonic assisted stir casting technique	3
PFC–FLAC coupling-based numerical simulation of triaxial test on soybean granular material	3
Successful in vitro therapy of triple-negative breast cancer cells with cetuximab-encapsulated liposomes embedded in macrophage membrane	3
Theoretical study on the flotation and adsorption behavior of dodecylamine on hydroxide minerals	3
Method for assessing coating uniformity of angioplasty balloons coated with poly(lactic-co-glycolic acid) nanoparticles loaded with quercetin	3
Improvement of separation performance of the hydrocyclone with dual enlarged outlets and an arc overflow tube	3
A CFD-based surrogate model for predicting slurry pipe flow pressure drops	3
A novel method for evaluation of spatial characteristics in a gas solid separation fluidized bed	3
Impact of cerium and tungsten doping on the structural and optical characteristics of NiO nanoparticles	3
Boron modified Ag 3 PO 4 powders for UV and visible light photocatalytic degradation of various dyes	3
Terminal settling velocity for binary irregularly shaped particle mixture from fluidization study: experiment, empirical correlation, and GA-ANN modeling	3
Predicting pneumatic conveyability and flowability of fly ash using bulk property characterization	3
New glyoxalated pre-gelatinized starch as release retardant for extended release pellets containing zaltoprofen: statistical optimization, in-vitro and in-vivo evaluation	3
Enhancing the flowability of limestone water suspension for economical transportation by variation in particle size distribution	3
Characteristics of force chains in the flow of photoelastic particles under a barrier	3
Inclined-flow segregation characteristics of multi size particles in a moving granular bed	3
Actinomycetes mediated microwave-assisted synthesis of nanoselenium and its biological activities	3
Particle shape characterization of shaking table streams in a Turkish chromite concentration plant by using dynamic imaging and microscopical techniques	3
Rheological characteristics of bauxite slurry with varying concentration, particle size distribution, and modal distribution for pipeline transportation	3
Prediction of flow mode transition in pneumatic conveying of fine particles using CFD	3
Influence of drying variables on the properties of noni powder obtained by spouted bed	3
Prediction of particle saltation velocity for horizontal dilute phase negative pressure pneumatic conveying	3
Researching the phenomenon of collision electrification between particles and flat materials based on machine learning	3
Surface-functionalized pullulan-based polymeric nanoparticles containing resveratrol: a green approach for lung cancer targeted delivery	3
Fabrication of camptothecin and gold nanoparticles encapsulated liposomes for synergic anticancer therapy in liver cancer cells	3
A comprehensive review on the flow characteristics and erosion wear of the various multi-phase flow handling equipment	3
Effects of large particles on the transport characteristics of slurries in horizontal pipes	3
Spray system characterization for evaluating particle size enlargement in fluidized bed agglomeration	3
Development and preclinical evaluation of a lipomer-based combinatorial delivery system for phytoconstituent and immunosuppressant in the management of Rheumatoid arthritis	3
Study on the impact of humidity on dust dispersion in open-pit mining under different environmental temperatures	3
Feasibility of incorporating coal mine overburden material as construction-grade fine aggregate	3
Characterization of coal pore structures and flow simulation based on CT and experiments of MIP and SEM	3
Preparation of monodisperse water-in-oil emulsions using microchannel homogenization	3
Mechanism study of improved flotation effect of long-chain acid compound collectors on gasification fine slag	2
Influence of rheology on the hydraulic conveying of red mud slurries through the pipeline for eco-friendly and safe disposal	2
Effect of layer thickness on mechanical properties of laser-powder bed fused Inconel 718 parts and study of post-heat treatment response	2
Correction	2
Study on the influence of coupling change of particle properties in passivation region on erosion-corrosion	2
Mechanistic study on the collision and trapping of magnetic seeds with fugitive particles in industrial flue gas purification process	2
Preparation of Au-MoS 2 photocatalyst with a green synthesis method and its application in water contaminant degradation	2
Antimicrobial activity of green synthesized Se nanoparticles using ginger and onion extract: a laboratory and in silico analysis	2
Numerical modeling of body shape effect on the performance of a square cyclone separator	2
Experimental and parametric numerical study of the orthogonal metal cutting using the smoothed particle hydrodynamics method	2
Heat transfer to a sphere immersed in a fluidized bed of coarse particles with transition from bubbling to turbulent flow regime	2
“Synthesis and characterization of TiO 2 nanoparticles as brake fluid additives: Viscosity modulation and impact on rheological properties”	2
Structural, morphological, optical properties of Zr- doped Co3O4 nanoparticles	2
Identifying challenge sludges to process at the Hanford site	2
Effect of grinding conditions on oil shale surface: FTIR analysis	2
Statement of Retraction: Response Surface Modeling of Lead and Copper Removal from Oil Field Brine by Potential Sorption Method	2
Fabrication of enteric coated mucoadhesive pellets of Tofacitinib citrate for treatment of ulcerative colitis	2
Improve reproducibility of determining minimum fluidization velocity via endowing it with a precise definition	2
Prediction and calibration of black soil modeling parameters based on response surface methodology and machine learning algorithms	2
Coarse particle-laden flows and energy dissipation in inclined hydraulic conveying pipes	2
Indoor air pollution and exposure analysis in different residential dwellings of a South Asian urban city	2
A CFD–DEM analysis of the de-cementation behavior of weakly cemented gas hydrate–bearing sediments in a hydrocyclone separator	2
Gas-solid flow characteristics in a PDC drill bit during negative pressure pneumatic conveying	2
Formulation, optimization, and in-vitro evaluation of polymeric microsponges for topical delivery of vanillin	2
Concentration study of a specularite ore via shaking table, reverse flotation, and microwave-assisted magnetic separation	2
Relationship between drying and grinding parameters and physicochemical properties of Hibiscus sabdariffa calyx powders	2
Study on the sedimentation mechanism of fine-grained quartz under carrier flocculation acidic conditions	2
Evaluation of Cu/GO/ x TiN composites processed through powder metallurgy	2
Bi-modal moment model for predicting the formation and growth of soot aggregate particles	2
Effect of T6, RRA and nano chromium carbide content on microstructure and mechanical properties of AA7075-Cr3C2 nanocomposite	2

Numerical simulation of charge generation and saturation for polymer particles by single impact on a metal plate	2
Biosynthesis of iron nanoparticles using brown algae Spatoglossum asperum and its antioxidant and anticancer activities through in vitro a	2
Theoretical analysis and numerical simulation study on the structural optimization of conical channels in the center tube of a centrifugal radial bed	2
Effect of magnetic field on particle deposition in a modeled room	2
Optimization of the microfluidic chip on cross-flow filtration for microparticles separation	2
Insight into the adsorptive mechanisms of methyl violet and reactive orange from water—a short review	2
Formulation development and evaluation of orodispersible tablet of Azelnidipine by factorial design and its comparison with the marketed formulation	2
Calibration and verification of DEM parameters for asphalt mixture based on experimental design method and bulk experiments	2
Synergic fabrication of gold – iron oxide magnetic nanohybrids as a potential agent for thermosensitizing and magnetic resonance-high intensity focused ultrasound (mr-HIFU) treatment in uterine myomas	1
Correction	1
Numerical simulation of particle and bubble detachment process in turbulent flow environment using CFD-DEM	1
Phytogenic synthesis of silver nanoparticles using Achyranthes japonica root and its in vitro antimicrobial, antioxidant, and mushroom tyr	1
Control force and inertial migration in Poiseuille flow: a computational study	1
Biogenic synthesis of gold nanoparticles using red seaweed Champia parvula and its anti-oxidant and anticarcinogenic activity on lung cancer	1
An experimental investigation on the settling of disk particles in annular region: Wall effect and drag coefficient	1
Study on external magnetic field improving the capture of Fe-based fine particles by magnetic fibers with different arrangement structures	1
Study of steel ball recharge and consumption in a wet cement industrial mill via a population balance model	1
Experimental investigation of a modified triboelectric charging device	1
Synthesis of mesoporous magnetic Fe 3 O 4 nanoparticles with different pore sizes and investigation of dye adsorption capacities	1
Experimental study of particle transport and deposition in fractured chalk under abrupt pH variations	1
Validation on fly ash DEM microparameters based on coarse-grained method	1
Numerical study on transport and deposition characteristics of particles associated with heat setting process in opposed jet flow field	1
Simulation of non-spherical particles for managing mass flow within a belt-driven hopper	1
Impact of the grinding method on oil shale flotation	1
Experimental study on the equilibrium scour pattern around isolated piers of varying diameter and inflow velocity	1
How reliable the light scattering in sizing the deformable particles by milling?	1
Selective capture of rare earth mineral particles in Bayan Obo by matrix parameters in superconducting magnetic separation	1
Development of novel mortar using fine river sand and pretreated waste flue gas desulfurization gypsum powder and pond fly ash	1
Relationship between the flow regime characteristics and pressure signal in dense phase pneumatic conveying	1
Inhibitory effects of gold nanoparticles biosynthesized by redox reaction using Rheum ribes lam fruit peels on pathogen strains and cancer cells	1
Effects of Stefan blowing on Eyring–Prandtl nanofluid flow past a moving plate in Darcy-porous medium	1
Barium-nickel-doped aluminum oxide (Al 2 O 3 ) nanocomposite for enhanced detection of 4-nitrophenol	1
Development and characterization of kaolin-based PVA/alginate polymer composite (KPA) for removal of uranium and strontium from aqueous solutions	1
Parameter optimization of a passive dust removal system at the coal transfer point of a crushing station	1
Motional characteristic and impact of fiber particles in the impeller of a centrifugal pump	1
Biogenic synthesis of selenium nanoparticles, characterization and screening of therapeutic applications using Averrhoa carambola leaf extract	1
Particle flow characteristics in the pipeline of a nonmetallic ore powder air classifier using a DPD-DEM coupled method	1
Influence of halite particles on the stability and physical properties of inverse olefin emulsions	1
Hydrodynamics characteristics of agglomerated carbon nanotube in a tapered fluidized bed	1
Minimum fluidization velocity and bed expansion of the inverse fluidized bed	1
Recognition of PCM in soil using semantic segmentation model and numerical simulation	1
Studying the design parameters of an auger filler in packaging black pepper seeds using the discrete element method	1
Tribo-performance analysis of HVOF sprayed Colmonoy-88 using the Taguchi method	1
Pulsation-assisted fluidised bed drying of heat-sensitive and sticky materials: effect of basic parameter, and pulsation-specific parameter	1
Investigation on the influence of high rate cooling crystallization process (HRCCP) parameters on the preparation and thermal behavior of ammonium perchlorate particles using Taguchi method	1
Downscaling modeling and validation of stone mastic asphalt grading	1
Effect of recycled TiC addition in the compaction and sintering behavior of Al-Mg-Cu-Zn + r-TiC powder metallurgy composites	1
Efficient removal of phenol in aqueous solution by the modified abandoned fine blue-coke: equilibrium, thermodynamic, kinetic, and adsorbent regeneration	1
A novel water film enhanced electrostatic agglomeration process to remove fine particles: performance and mechanism	1
Enhancing dolomite efficiency for neutralizing acidic soil under laboratory incubation using grinding, ultrasonication, and horizontal shaking	1
Bubble growth and detachment process in surfactant solutions: a study of 90% pure sodium dodecyl sulfate	1
Application prospect of synchrotron radiation SAXS in time-resolved study of dust explosion	1
Sonochemical synthesis of polymeric adsorbent based on biodegradable chitosan for the removal of some fission products	1
Process optimization of nano-calcium carbonate produced from snail shell using supermasscollider	1
Influence of post-injection strategies and CeO2 nanoparticles additives in the C30D blends and diesel on engine performance, NOX emissions, and PM characteristics in diesel engin	1
Modeling pressure drop in curvature and reacceleration zones in bends during pneumatic conveying of fine powders	1
Effect of air humidity on the pulse-jet cleaning performance of cartridge filter for collecting hygroscopic adhesive dusts	1
Modeling minimum transport boundary for pneumatic conveying of powders	1
Effect of aggregate size on the slump and uniaxial compressive strength of concrete: a DEM study	1
Movement and velocity of a particle in an inverse fluidized bed	1
The effect of pleat ratio on the effective filtration area of the large-diameter pleated filter cartridge	1
An analytical study of TEG loss in a natural gas purification plant based on high-pressure droplet angular scattering	1
Numerical investigation of inlet section structure effect on wear characteristic of particle condition in centrifugal slurry pump by CFD-DEM coupling	1
Study on the relation of bubble behavior and bed density in gas–solid separation fluidized bed using electrical capacitance tomography	1
Effect of ambient humidity on the tribo-electrostatic separation of granular plastic wastes	1
Utilizing the high intensity conditioning process with a multi-bladed impeller to enhance the flotation of fine-grained galena	1
Characterization of manufactured sand derived from waste Clarens Formation sandstone and its potential for mortar applications	1
Study on the corrosion inhibition and lubrication behavior of magnesium borate modified with lauryl glycol on cylinder liner materials in methanol engines	1
Particulate suspension: a review of studies characterizing particulates and volatile organic compounds emissions during additive manufacturing processes	1
Phyto-assisted eco-friendly fabrication of haemocompatible vanadium nanoparticles using Azadirachta indica leaf extract inherent with antioxidant and anti-bacterial acti	1
CFD investigation of the effect of solid particles on the power consumption of a 20-inch centrifugal pump for the transportation of petroleum products	1
Construction of vincristine-loaded bimetallic nanoparticles doped zeolite imidazolate frameworks-8 displays promising synergic chemodynamic and photothermal therapy in glioma cancer	1
Evaluation of the selectivity and modelling of breakthrough curves in fixed-bed bio-adsorption studies to remove DR 81 and CG-H3G textile dyes using cockle shells	1