OOIR: Observatory of International Research

Papers

(The median citation count of Polymer Composites is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
A novel wear‐resistant diamine type polybenzoxazine composites reinforced by modified poly(p‐phenylene supported benzodioxazole) (PBO) fiber and polytetrafluoroethylene (PTFE)	173
A Novel Strategy to Enhance the Mechanical Properties of UHMWPE Fiber Composites	138
Robust Generalized Model for Low‐Velocity Impact Damage in Composite Laminates	137
Dual experimental‐numerical approach to improving creep resistance in glass fiber reinforced polymer composites using cellulose nanocrystals	125
Effective interlaminar toughening of carbon fiber/epoxy composite laminates by extremely low loadings of monolayer graphene oxide	120
Axial Compression Behavior of TRU ‐Reinforced Plain Concrete Columns	112
Fiber tension prediction and control methods in automated fiber placement	101
Cover Image	89
Mathematical method for describing the dynamic wear coefficient of FRP ‐cemented carbide couple during continuous relative sliding	89
Failure analysis of angle‐ply thin woven GFRP composites under low‐velocity impact and low‐temperature	88
Construction of Energy‐Efficient Electro‐Thermal Anti‐Icing/De‐Icing System for Composite Wings Based on MWCNT Films	80
Rheological and Multifunctional Properties of PBAT / CNT Nanocomposites With Diverse	78
Comparison of analytical and finite element solutions for monitoring the self‐generated temperature in the fatigue test of novel continuous glass fiber‐reinforced Elium thermoplastic composites	77
Study on the Damage Evolution Mechanism of Fiber‐Reinforced Composite Pipe Under Tensile Load	75
Improvement of dielectric constant and mechanical properties of thermoplastic polyurethanes using surface modified strontium titanate	74
Dynamic evolution pattern of carbon‐fiber reinforced polymer strain in prestressed carbon‐fiber reinforced polymer constrained concrete cylinders under axial compression	73
Transformation of hexagonal boron nitride nanocomposite underfill in microelectronics packaging	72
Optimization of Nile rose role as a bio‐filler for green natural rubber composites	72
Ultra‐high power density in poly(arylene ether nitrile)‐based composites containing barium titanate and boron nitride nanosheets	72
Nanocomposite films of cellulose nanofiber/azodianiline covalent organic framework as electrode materials	71
Static deflection prediction of damaged glass fiber‐reinforced metal laminated composite and experimental validation	70
Novel hybrid polymer composites for optimized thermal performance in electric vehicle battery cases	70
Temperature analysis in fiber metal laminates drilling: Experimental and numerical results	69
An experimental investigation of the tensile, fracture and microstructural characteristics of ABS/SBS reinforced with HNTs	68
Manufacturing studies of a polymeric/composite heart valve prosthesis	68

	66
Mechanical properties of carbon‐aramid hybrid fiber‐reinforced epoxy/poly(vinyl butyral) composites	66
Investigation of charge dynamics in the corona‐aged silicone rubber alumina nanocomposite	65
A comparative study of graphite and graphene sheets employed in polymer‐based electromagnetic shielding materials	64
Issue Information	63
Long‐acting release of small molecules achieved by barrier effect of nano‐brick	61
Post‐curing effect on the mode I fracture toughness of the glass/epoxy laminates	60
	60
Hybrid nanocellulose/carbon nanotube/natural rubber nanocomposites with a continuous three‐dimensional conductive network	58
Comprehensive study of antimicrobial polycaprolactone/clay nanocomposite films: Preparation, characterization, properties and degradation in simulated body fluid	57
A rapid and precise approach to predicting the cure‐induced warping of T‐shaped composite parts with inconsistent layup	55
Mechanical and Thermal Performance of SLA ‐Printed Ceramic‐Reinforced Lattice Structures: A Topology‐Material Synergy Approach	53
Preparation and properties of antibacterial biomaterial PAA/TiO₂/Ag	53
Electrical Behavior of Green‐Synthesized Nano Silver Particles Embedded in Polyurethane: Numerical and Experimental Studies	53
Experimental and numerical studies of the simultaneous effects of temperature and impact velocity on ballistic behavior of GLARE	52
An Interfacial Strategy Incorporating Multiscaled Calcium Hydrogen Phosphate Dihydrate Nanosheets/Microsheets Into Carbon Fiber Composites	52
A Study on the Bending Recovery Characteristics of CFRP Curved Beams in Relation to Interlayer Shear and Crack Friction Behavior	51
Preliminary Experimental Behavior of Bio‐Epoxy Polymer Impregnation on Curaua Fibers Against Glass Fibers	51
Optimizing mechanical properties in carbon fiber reinforced thermoplastic composites: The role of fabric structure	50
Load‐Bearing Capacity and Failure Mode of L‐Shaped Laminates: The Role of Delamination Defect Location and Fiber Bridging	50
Meso‐Scale Modeling for Progression of Damage in Stitched and Unstitched Composites Subjected to Tensile and Compression Loads	50
Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates	50
Experimental investigation and molecular dynamics simulations of plasma treatment on the interface strength of overmolded hybrid fiber reinforced polypropylene composites	49
Degradation of wheat straw/polylactic acid composites by Aspergillus niger	49
Sensitivity Analysis of the Elastic Properties of Graphene/Fiber‐Reinforced Nanocomposites	49
Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites	48
The post‐buckling analysis of cylindrical polymer fiber‐reinforced composite tubes subjected to axial loading fabricated by filament winding technology	47
Piezoelectric nanocomposite films based on anionic waterborne polyurethane and barium titanate nanoparticle: Fabrication, microstructure, and property characterization	47
The influence of geometric characteristic on the pullout behavior of basalt FRP minibar embedded in concrete	47
Structure and functional properties of aluminum hydroxide reinforced bamboo‐derived cellulose acetate composite film for biodegradable packaging	47
Construction of “hard‐soft‐hard” structures with ammonium cerium nitrate/sodium alginate/carbon nanotubes on carbon fiber surfaces for superior mechanical	46
A multiscale modeling framework for predicting strain‐dependent electrical conductivity of carbon nanotube‐incorporated nanocomposites considering the electron tunneling effect	45
A promising method for promoting interfacial adhesion of aramid/rubber composite using atmospheric pressure plasma surface modification	45
Influence of lay‐up sequences on cylindrical parts drawability of CFRP laminates	45
Wear‐Resistant Epoxy Coatings With KH550‐Functionalized SiC@SiO₂: Effects of Thermal Oxidation and Surface Grafting	45
Influence of LPRE on the size‐dependent phase velocity of sandwich beam including FG porous and smart nanocomposite layers	45
Delamination of MXene using biomolecule: An effective strategy toward the utilization of delaminated MXene as fillers in polymer composites	44
Multifunctional lightweight PANI/Ti₃C₂T_x‐PVDF composite foam for efficient microwave absorption	44
Design, fabrication and characterization of silane tailored surface of halloysite based polymer nanocomposites	44
Constructing independent CNTs conductive network to boost combustion performance of metastable intermixed composites	43
Dielectric, transparent, thermally stable and mechanically robust bionanocomposite films based on chitosan and modified cellulose nanocrystals	43
Enhancing damage resistance in tubular triaxial hybrid braided composites: Innovative production and tensile modulus prediction with damage analysis	42
Low velocity impact study of vacuum bag infused bouligand inspired composites	42
Multifunctional sustainable quercetin polyphenol/functionalized carbon nanotubes; semi‐transparent conductive films and 3D printing inks	42
Comparison of mechanical properties and thermal stability of graphene‐based materials and halloysite nanotubes reinforced maleated polymer compatibilized polypropylene nanocomposites	42
Reliability‐Oriented Optimization of Composite Drill Pipes Using Integrated Finite Element and Reinforcement Learning Framework	42
Analysis of impact response and damage evolution in multi‐scale of novel 3D carbon fiber‐reinforced polyetheretherketone composites	42
Influence of Temperature Profile on Crack Evolution in Constrained Thermoset Matrix Curing	41
Novel reinforced wood material with a biomimetic hierarchical square honeycomb structure under quasi‐static loading: Simulation and experimental study	41
Free vibration of functionally graded composite doubly‐curved shells with embedded polymeric viscoelastic core	41

Zeolitic imidazolate framework‐8 nanocrystals synthesized and decorated carbon fibers by electrophoretic deposition for enhancing interfacial properties of epoxy‐based composites	40
Piezoelectric, mechanical, and crystallographic properties of polyvinylidene fluoride‐hexafluoropropylene based composites reinforced by different dimensional carbon nanomaterials	40
Flow ‐Induced Microstructure Manipulation for Thermal‐Humid Performance Enhancement in Quantum Dots Luminescent Composite	40
Novel lignin microspheres reinforced poly (lactic acid) composites for fused deposition modeling	39
Vibration modals of composite auxetic honeycomb sandwich cylindrical shells	39
Continuous High‐Efficiency Treatment and Process Optimization of Pultruded Plant Fiber Reinforced Composites for Structural Applications	39
Influence of alumina and PMMA on mechanical properties and aging behavior of 3D printed	39
Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design	38
Improvement of “point‐plane”‐like hetero‐structured fillers on thermal conductivity of poly(vinyl alcohol) composites	38
Performance optimization and reliability analysis of CFRP adhesive‐rivet hybrid joint	38
Effect of manufacturing processes and multi‐walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites	38
A compendious review on fatigue properties of the bio‐nanocomposites	38
Synthesis of functionalized ZnO nanoflake loaded polyvinylidene fluoride composites with enhanced energy storage properties	37
In‐situ reduction method to build Chitosan@silver nanoparticles and its application for bis(2‐hydroxyethyl) terephthalate‐based polyurethane composite films with excellent antibacterial and	37
A study on the crystallization and melting of PLA nanocomposites with cellulose nanocrystals by DSC	37
Flexible hexagonal boron nitride@liquid metal/polydimethylsiloxane composites with excellent thermal conductivity and superior mechanical properties	37
Blockchain technology and AI‐facilitated polymers recycling: Utilization, realities, and sustainability	37
Constructing Graphene and Carbon Nanotube “Artery–Vein” 3D Structures on the Surface of Carbon Fibers Using a Magnetic Field to Prepare High‐Strength, Multifunctional Composites	37
Enhancing resistance welding strength of carbon fiber/polycaprolactam thermoplastic composites through coupling agent‐modified metal heating elements	37
Bioinspired strategy for the fabrication of fast‐curing, tough, and high‐strength phenolic resins	37
Effect of tufting on the interlaminar bonding behavior of needled composite	37
Hybridization effect of silane treated basalt fiber on the mechanical, thermal and morphological properties of polypropylene/bamboo composite	37
Improved electromagnetic interference shielding properties of poly (vinylidene fluoride) composites based on carbon nanotubes and graphene nanoplatelets	36
Effect of multi‐angle lamination on mechanical properties and damages behavior of carbon fiber reinforced resin matrix composites	36
Weibull reliability plots to study the strain rate effect on interfacial strengths of carbon fiber reinforced epoxy composites	36
Synergistic effect of BNNS and MgAl layered double hydroxide nanosheets on dielectric properties and thermal conductivity of polyetherimide nanocomposite films	36
Fabrication and investigation of graphene‐loaded triiron tetraoxide/silicone‐rubber electromagnetic shielding composites based on static magnetic‐field–induced orientation	36
Wood flour and hazelnut shells polylactide‐based biocomposites for packaging applications: Characterization, photo‐oxidation, and compost burial degradation	36
Preparation and characterization of novel bio‐based polyamide 5.6 composites as sustainable alternatives to petroleum‐derived polyamide 6.6	36
Mechanical, thermal, and electrical properties of amine‐ and non‐functionalized reduced graphene oxide/epoxy carbon fiber‐reinforced polymers	36
Effect of fatigue loading on physical and structural properties of epoxy in glass fiber reinforced polymer: An analysis	35
Tailoring the crystallization, viscoelastic, and thermal degradation properties of polypropylene by nano‐tungsten carbide and multiwalled carbon nanotubes	35
On the nonlinear buckling and postbuckling responses of sandwich FG‐GRC toroidal shell segments with corrugated core under axial tension and compression in the thermal environmen	35
Fabrication and characterization approach to enhance the mechanical performance of zirconia‐coated Multi‐walled carbon nanotubes reinforced High density polyethylene composites	35
Suitability examination of novel cellulosic plant fiber from Furcraea selloa K. Koch peduncle for a potent	35
Polytetrafluoroethylene composites with a novel combination of reinforcing filler and solid lubricant and study of their tribological and thermo‐mechanical properties for dynamic applications	35
Experimental study on the prestress loss of double‐end prestressing of carbon‐fiber reinforced polymer fabric for strengthening large‐diameter reinforced concrete circular columns	35
Fast and accurate prediction of cure quality and mechanical performance in fiber‐reinforced polymer composite using dielectric variables and machine learning	35
Investigation on piezoresistive properties of reduced graphene oxide treated glass textiles based multifunctional sensors	35
Development of stab resistant armor for different energy levels using shear thickening fluid reinforced multi‐layered p‐aramid fabrics	34
Preparation and characterization of a multifunctional film with excellent UV shielding, antibacterial and antioxidant capabilities containing cinnamaldehyde and titanium dioxide (TiO	34
Effect of mold on curing deformation of resin transfer molding‐made textile composites	34
Cardanol derivatives as compatibilizers for strengthening and toughening polylactic acid/bamboo fiber bio‐composites	34
High thermal conductivity electrical insulation composite EP/ h ‐BN obtained by DC electric field induction	34
Characterization of biobased epoxy resins to manufacture eco‐composites showing recycling properties	33
The influence of GNP on the mechanical and thermomechanical properties of epoxy adhesive: Pearson correlation matrix and heatmap application in data interpretation	33
Experimental characterization and numerical analysis of 3D woven preforms torsional deformation	33
Recent developments in lignin modification and its application in lignin‐based green composites: A review	33
Fused deposition modeling of carbon‐reinforced polymer matrix composites: A comprehensive review	33
Influence of Resin Distribution Within UHMWPE Panels on Adhesion Strength and Ballistic Responses	33
Effect of UV‐water weathering on the mechanical properties of flax‐fiber‐reinforced polymer composites	33
An experimental methodology to characterize the multiaxial failure of short‐fiber reinforced thermoplastics	32
Interfacial stress transfer factor and tensile strength of polymer halloysite nanotubes systems	32
Uncertainty quantification of compressive after impact strength in laminated composites using improved Bayesian ResNet deep learning model	32
Real‐time observation of microcrack growth in thin film microtomed from rubber/nanocellulose composite sheets, during tensile deformation	32
Effect of environmental temperature and semi‐crystalline order on the toughening of polyamide 1010 by 2D nanomaterials	32
Modeling of Tunneling Distance Among Nearby Carbon Nanofibers to Control the Tunneling Resistance and Electrical Conductivity of Composites	32
Adjusting the lattice spacing and sandwich structure design of molybdenum disulfide nanosheets synergistically enhances the electrical properties of polyimide based composites	32
Curing, thermal, tensile and flammability characteristics of sepiolite/ethylene propylene diene monomer rubber composites with glut palmitate salt and silane coupling agents	32
Exploring the formability of GLARE laminates enhanced with hybrid nanofillers through formability index, anisotropy, and surface crack length analysis	32
Tensile properties and failure mechanism of basalt fiber reinforced aluminum alloy laminates at different temperatures	32
Interface enhancement and distribution of carbon fibers in injection welding	31
Spray binder for automated preforming: Spray process and preform properties	31
On low velocity impact response of Sandwich composite with jute/epoxy facesheet and cenosphere reinforced functionally graded Core: Experimental and finite element approach	31
A micromechanical study on shear performance of unidirectional composites with randomly distributed fibers in the transverse cross‐section	31
Evaluating the effectiveness of fusion bond repairs on impact damaged thermoplastic composites	31
Decentralized approach for incorporating waste wind turbine blades into 3D printing filaments using mechanical recycling	31
A method of obtaining anisotropic loss factors of carbon fibers by indirect fitting	31
Investigation of microstructural and mechanical properties of weld lines in injection‐molded short glass fiber‐reinforced polyamide 6	31
Issue Information	31
Natural fiber‐reinforced light composites for the automotive industry	31
The preparation of rigid hybrid silicone resins by combining carbon nanomaterial loading nanoparticles	31
Salt‐Temperature Corrosion Resistance of BFRP and Load‐Carrying Capacity of Adhesive‐Riveted Hybrid Joints	31
Influence of alkali treatment on the interfacial shear strength of Agave lechuguilla fiber and its significance as a reinforcing material in polymer composites for mechanical applications	31
	31
Viscoplastic deformation of cotton fabric‐reinforced polypropylene composites	31
Post‐curing and fiber hybridization effects on mode‐II interlaminar fracture toughness of glass/carbon/epoxy composites	30
Through‐thickness tensile characterization and analysis of fiber‐reinforced polymer composites using digital image correlation and finite element modeling	30
Multiscale Simulation of the Mechanical Response of 3D Carbon Fiber Braided Composites Considering Porosity and Temperature Effects	30
Modulation of Structural, Optical and Electrical Properties of Polyaniline Through SnO₂ Incorporation: A Synergistic Experimental and Density Functional Study	30

Characteristics and degradability of laser print waste paper fiber reinforced PLA resin matrix composite materials	30
Verification of Mechanical Properties of Aerospace CFRP Composites Under Vibration‐Microwave Curing Process	30
Norbornenyl‐Modified Nanosilica for Reinforced Polydicyclopentadiene Composites	30
An adaptive activation energy method for predicting resin curing behavior and thermal overshoot in thick CFRP plates	30
Flexible and thermal conductive poly (vinylidene fluoride) composites with silver decorated hexagonal boron nitride/silicon carbide hybrid filler	30
Study on the heating mechanism and macro/micro properties of composite materials under microwave curing	30
Physico‐Mechanical Characterization of Epoxy Based Hybrid Composites Reinforced With Multiple Layers of Glass Fibers and Stainless Steel Wire Meshes	30
Interfacial Chemistry Behind Damage Monitoring in Glass Fiber‐Reinforced Composites: Attempts and Perspectives	30
Enhanced Electromagnetic Interference Shielding via Magnetic Field–Induced Alignment and Asymmetric Structure Design in Polylactic Acid‐Based Conductive/Magnetic Multilayer Films	30
Advanced biodegradable thermoplastic elastomer/reduced graphene oxide nanocomposites by in situ compositing process	30
Designing Bouligand‐inspired reinforcement for creating wood fiber‐reinforced composites with excellent bending properties	30
Ultralong hydroxyapatite nanofibers/organics composite film for improving its mechanical property: Effect of proportions	30
Preparation and properties of resin matrix composites reinforced by high thermal conductivity graphite films	30
Dynamic Force Model Based on Material Removal Behavior Affected by Grinding Mode in CF/PEEK Grinding	30
Positive Temperature Coefficient Heating Material With Novel Low Curie Temperature and Low Room‐Temperature Resistivity	30
Synthesis and characterization of sea urchin spike strengthened grape seed oil‐epoxy composite coating material	30
Investigate of shock wave mitigation performance of nano‐carbon fillers modified epoxy composites	30
Dual Interfacial Engineering of Glass Fiber‐Reinforced Composites: Synergistic Enhancement via Hyperbranched Polyester‐Modified Resin and Rigid/Flexible Fiber Coatings	30
Ultraviolet cross‐linked ultra‐high molecular weight polyethylene fiber laminate: Preparation and mechanism analysis for its excellent mechanical properties	30
Solid Particle Erosion and Predictive Modeling of Epoxy Composites Reinforced With Diatom Frustules	29
Enhanced dielectric properties of nanocomposites with cyanoethyl cellulose and core‐shell structured BaTiO₃@Al₂O₃ fillers	29
Investigation of physical, flexural, and dynamic mechanical properties of alumina and graphene nanoplatelets filled epoxy nanocomposites	29
Development of high‐strength carbon fiber/thermoplastic epoxy resin composites and it's recyclability	29
Optimization of Process Parameters for Thick‐Section Composites: A Case Study for Leaf Spring Manufacturing	29
Mechanical, thermogravimetric, and dynamic mechanical analysis of basalt and flax fibers intertwined vinyl ester polymer composites	29
Investigation on preparation and mechanical properties of carbon fiber fabric/hollow glass beads/epoxy resin sandwich composite laminates	29
Experimental investigation on mechanical performance of PVC foam‐based E‐glass isophthalic polyester composites	29
Monitoring and verification of micro‐strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory	29
A High‐Performance and Sensitive Strain Sensor Based on MWCNT/Epoxy for Micro‐Strain Monitoring of Steel Structure	29
Excellent gas barrier property of reduced graphene oxide/nitrile butadiene rubber composite film with high reduced graphene oxide content	29
Integrating machine learning and digital twin for strength prediction of CFRP/aluminum adhesive joints under hygrothermal conditions	28
Evaluating the Influence of APTES ‐Treated Glass Powder on Shear and Vibrational Characteristics of Co‐cured Composite Joints	28
A novel thermoplastic material: Pre‐polymerized PMMA liquid resin and continuous glass fiber‐reinforced composite initiated by benzoyl peroxide/N,N‐dimethylaniline	28
Deformation and energy absorption properties of hollow glass microsphere/polyurethane lightweight core reinforced carbon fiber tubes under lateral compression	28
Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Compone	28
Rare earth doped strontium aluminate/poly(methyl methacrylate) composites for lighting with long persistent luminescence and high tensile performance	28
Conversion Rate and Mechanical Properties of Polymethyl Methacrylate ( PMMA ) and Its Biaxial Glass Fiber Composites for Wind Turbine Blade	28
Shape recovery and energy absorption properties of 3D printed continuous ramie fiber reinforced thin‐walled biocomposite structures	28
Damage identification and localization of pultruded FRP composites based on convolutional recurrent neural network and metaheuristic intelligent algorithms	28
A review of the mechanical property, durability, and modification of carbon‐ and glass‐fiber reinforced polyurethane composites	28
Multi ‐Axial Compression Analysis of Novel Three‐Dimensional Six‐Directional Braided Composites by Structural Optimization Design	28
Surface Grafting of Amino Terminated Dendrimers on Carbon Fibers and Their Influence on Interfacial Properties With Epoxy Resin	28
Effect of Geometrical Defects of Boron Nitride Nanotubes on Mechanical and Tribological Properties of Nitrile Butadiene Rubber Composites: Molecular Dynamics Simulations	28
Effect of geometric configurations and curvature angle of corrugated sandwich structures on impact behavior	28
Study on the thermal assistance friction stir lap welding of aluminum alloy and CFRTP	28
Study on interlayer properties of multilayer complex structures of graphene papers/harness satin weave glass fibers/epoxy reinforced composites with electric heating de‐icing	28
Effect of fumed silica and halloysite nanoparticles on the microstructure, mechanical, and fracture properties of thermoplastic polyolefin elastomer toughened polypropylene	28
Improving Polarization Hysteresis to Enhance Dielectric and Energy Storage Performance of Polyvinylidene Difluoride‐Based Nanocomposite Films	27
Synthesis, characterization and microwave absorption properties of BaFe₁₂O₁₉/Ni_0.5Mn_0.5Fe₂O₄@ polyaniline nanocomposites wi	27
Experimental and simulation studies of hybrid MWCNT /montmorillonite reinforced FDM based	27
Low‐dielectric and low‐temperature curable fluorinated nano carbon/polyimide composites with 6‐aminoquinoline for end capping	27
Mechanical, surface morphological, and thermal properties of Musa acuminate peduncles fiber reinforced polyester composites: Fiber loading and alkalization impact	27
Thermal, morphological and mechanical properties of glass fiber reinforced star‐branched polyamide 6	27
Advantages and limitations of active phase silanization in PVDF composites: Focus on electrical properties and energy harvesting potential	27
Surface modification of basalt fiber using to reinforce polycarbonate composites and its mechanical performance	27
Production and Performance Evaluation of a Novel Ionic Electroactive Polymer Actuator With Ag/ RGO Electrodes	27
Insight into the relationship between interfacial structure and thermal conductivity in epoxy resin/Al₂O₃ composite	27
Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study	26
Issue Information	26
Study on properties influence of carbon fiber reinforced polyimide composites via surface modification using metal mesh	26
Investigating long‐term creep in a composite pipe subjected to transverse loading and aqueous condition	26
Mahua oil cake microcellulose as a performance enhancer in flax fiber composites: Mechanical strength and sound absorption analysis	26
Fabrication and mechanical properties of thermoplastic corrugated sandwich panel with enhanced face‐core interface	26
Fabrication of solid polymer electrolyte based on carboxymethyl cellulose complexed with lithium acetate salt as Lithium‐ion battery separator	26
Static and dynamic mechanical behavior of intra‐hybrid jute/sisal and flax/kenaf reinforced polypropylene composites	26
A comprehensive review of current research on various materials used for developing composite bipolar plates in polymer electrolyte membrane fuel cells	26
Study on the structure and γ‐ray shielding performance of polypropylene/PbO composites with heterogeneous networks	26
Tribological and mechanical properties of nanofilled glass fiber reinforced composites and analyzing the tribological behavior using artificial neural networks	25
Effect of environmental humidity on the creep behavior of flax fiber‐reinforced polymer composites	25
Recent Advances in the Multifunctional Properties and Applications of Carbon Nanotube/Graphene Hybrid Polymer Nanocomposites	25
Research on the lightweight design and multilevel optimization method of B‐pillar of hybrid material based on side‐impact safety and multicriteria decision‐making	25
Influence of graphene nanoplatelet concentration on the electrical, mechanical, and piezoresistive properties of glass fiber/epoxy composites	25
Flame retardant characteristics of natural fibre reinforced polymer composites: A thematic review	25
Tailoring the Flexural Performance of Additively Manufactured Carbon/Glass Fiber Hybrid Composites: Synergistic Optimization of Hybrid Ratio and Ply Stacking Sequence	25
Synthesis and characterization of novel epoxy‐urethane coating and its graphene nanocomposites	25
Improved the surface properties of carbon fiber through hyperbranched polyaryletherketone sizing	25
Isolation and characterization of novel agrowaste‐based cellulosic micro fillers from Borassus flabellifer flower for polymer composite reinforcement	25
Performance of eco‐friendly particleboard from agro‐industrial residues bonded with formaldehyde‐free natural rubber latex adhesive for interior applications	25
Hybridization effect on the mechanical properties of basalt fiber reinforced ZnO modified epoxy composites	25
Lay‐up defects inspection for automated fiber placement with structural light scanning and deep learning	25
Effect of carbon fiber surface properties on carbon fiber/polyphenylene sulfide composite interfacial property	25
Thermal conductivity and heat transfer mechanism of epoxy composites constructing by carbon fiber felt with three‐dimensional layered structure	25
Mechanisms of Thermal Ablation in CFRP With Absorption on Complex‐Shaped Reaction Surfaces During Picosecond Laser Irradiation	25
An explainable artificial intelligence‐based approach for reliable damage detection in polymer composite structures using deep learning	25
On the Interfacial Bonding Strength Formation in Overmolded Thermoplastic Composites: An Integrated Experimental and Numerical Investigation	24
Experimental and Finite Element Study on Low‐Velocity Impact Response and Residual Strength of Multistitch BFRP‐T Joints	24
Ionic liquid‐functionalized reinforcements in epoxy‐based composites: A systematic review	24
Effects of Glass Fiber Ratio on the Environmental Stress Cracking Resistance of Polycarbonates	24
Multiscale Analysis on Three‐Dimensional Heat Transfer of Needle‐Punched Composite Preforms: Virtual Fiber Models and Layered Homogenization‐Reintegration Method	24
Highly thermally conductive and EMI shielding composite fabricated via free‐radical polymerization of poly acrylic acid assisted by expanded graphite with liquid metal‐grafted MXene	24
Impact of Intact Length and Initial Debond on the Mode I Fracture Toughness of Sandwich Structures	24
Preparation of h‐BN/PMMA composites by in situ polymerization and research on their structure and properties	24
Design Optimization of Fiber‐Reinforced Structures With Intervening a Manufacturing Constraint	24
A novel waterborne g‐CPP sizing agent for the interfacial enhancement of SCF/PP composites	24
The influence of fiber addition and different fabrication conditions in manufacturing plasma treated polyethylene/carbon fiber composites	24