OOIR: Observatory of International Research

Papers

(The TQCC of Polymer Composites is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)

Article	Citations
Cover Image	202
Mathematical method for describing the dynamic wear coefficient of FRP ‐cemented carbide couple during continuous relative sliding	152
Rheological and Multifunctional Properties of PBAT / CNT Nanocomposites With Diverse	141
Cardanol derivatives as compatibilizers for strengthening and toughening polylactic acid/bamboo fiber bio‐composites	136
Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites	108
Electrical Behavior of Green‐Synthesized Nano Silver Particles Embedded in Polyurethane: Numerical and Experimental Studies	107
Wood flour and hazelnut shells polylactide‐based biocomposites for packaging applications: Characterization, photo‐oxidation, and compost burial degradation	95
Influence of lay‐up sequences on cylindrical parts drawability of CFRP laminates	94
Effect of mold on curing deformation of resin transfer molding‐made textile composites	92
Synergistic Enhancement of Mechanical and Interfacial Properties in Carbon Fiber Epoxy Nanocomposites via Dual Functionalization of Fiber and Exfoliated Hexagonal Boron Nitride Nanosheets	89
Improvement of “point‐plane”‐like hetero‐structured fillers on thermal conductivity of poly(vinyl alcohol) composites	87
Effective interlaminar toughening of carbon fiber/epoxy composite laminates by extremely low loadings of monolayer graphene oxide	84
Effect of fatigue loading on physical and structural properties of epoxy in glass fiber reinforced polymer: An analysis	81
A study on the crystallization and melting of PLA nanocomposites with cellulose nanocrystals by DSC	79
High thermal conductivity electrical insulation composite EP/ h ‐BN obtained by DC electric field induction	79
Piezoelectric, mechanical, and crystallographic properties of polyvinylidene fluoride‐hexafluoropropylene based composites reinforced by different dimensional carbon nanomaterials	79
Axial Compression Behavior of TRU ‐Reinforced Plain Concrete Columns	78
Mechanical, thermal, and electrical properties of amine‐ and non‐functionalized reduced graphene oxide/epoxy carbon fiber‐reinforced polymers	77
Zeolitic imidazolate framework‐8 nanocrystals synthesized and decorated carbon fibers by electrophoretic deposition for enhancing interfacial properties of epoxy‐based composites	76
Blockchain technology and AI‐facilitated polymers recycling: Utilization, realities, and sustainability	76
Machine Learning‐Assisted Prediction of Low‐Velocity Impact Resistance in CFRP /Steel Hybrid Laminates	75
Synergistic Effect of Polydopamine Modified Ti ₃ C ₂	74
Temperature analysis in fiber metal laminates drilling: Experimental and numerical results	72
Long‐acting release of small molecules achieved by barrier effect of nano‐brick	68
Failure analysis of angle‐ply thin woven GFRP composites under low‐velocity impact and low‐temperature	67

Bioinspired strategy for the fabrication of fast‐curing, tough, and high‐strength phenolic resins	66
Improvement of dielectric constant and mechanical properties of thermoplastic polyurethanes using surface modified strontium titanate	66
Transformation of hexagonal boron nitride nanocomposite underfill in microelectronics packaging	64
Dynamic evolution pattern of carbon‐fiber reinforced polymer strain in prestressed carbon‐fiber reinforced polymer constrained concrete cylinders under axial compression	64
Nanocomposite films of cellulose nanofiber/azodianiline covalent organic framework as electrode materials	63
Static deflection prediction of damaged glass fiber‐reinforced metal laminated composite and experimental validation	63
Manufacturing studies of a polymeric/composite heart valve prosthesis	62
An experimental investigation of the tensile, fracture and microstructural characteristics of ABS/SBS reinforced with HNTs	62
	62
A comparative study of graphite and graphene sheets employed in polymer‐based electromagnetic shielding materials	61
Issue Information	60
	59
Comprehensive study of antimicrobial polycaprolactone/clay nanocomposite films: Preparation, characterization, properties and degradation in simulated body fluid	59
A rapid and precise approach to predicting the cure‐induced warping of T‐shaped composite parts with inconsistent layup	58
An Interfacial Strategy Incorporating Multiscaled Calcium Hydrogen Phosphate Dihydrate Nanosheets/Microsheets Into Carbon Fiber Composites	57
Experimental and numerical studies of the simultaneous effects of temperature and impact velocity on ballistic behavior of GLARE	55
Experimental study on the prestress loss of double‐end prestressing of carbon‐fiber reinforced polymer fabric for strengthening large‐diameter reinforced concrete circular columns	54
Performance optimization and reliability analysis of CFRP adhesive‐rivet hybrid joint	54
Fabrication and characterization approach to enhance the mechanical performance of zirconia‐coated Multi‐walled carbon nanotubes reinforced High density polyethylene composites	52
Effect of tufting on the interlaminar bonding behavior of needled composite	52
Investigation of charge dynamics in the corona‐aged silicone rubber alumina nanocomposite	52
Parameter Optimization and Enhancement Mechanisms of Ultrasonic Adhesive‐Impact Bonding for CNT ‐Reinforced Epoxy Adhesive Joints: A Combined Experim	52
Influence of alumina and PMMA on mechanical properties and aging behavior of 3D printed	52
Continuous High‐Efficiency Treatment and Process Optimization of Pultruded Plant Fiber Reinforced Composites for Structural Applications	51
A promising method for promoting interfacial adhesion of aramid/rubber composite using atmospheric pressure plasma surface modification	51
Influence of Resin Distribution Within UHMWPE Panels on Adhesion Strength and Ballistic Responses	51
Design, fabrication and characterization of silane tailored surface of halloysite based polymer nanocomposites	50
Effect of multi‐angle lamination on mechanical properties and damages behavior of carbon fiber reinforced resin matrix composites	50
Comparison of analytical and finite element solutions for monitoring the self‐generated temperature in the fatigue test of novel continuous glass fiber‐reinforced Elium thermoplastic composites	49
Damage Prediction and Localization of GLARE Laminates Under Tensile Load Using SWCNT /	49
Experimental characterization and numerical analysis of 3D woven preforms torsional deformation	48
Effect of UV‐water weathering on the mechanical properties of flax‐fiber‐reinforced polymer composites	48
Synergistic effect of BNNS and MgAl layered double hydroxide nanosheets on dielectric properties and thermal conductivity of polyetherimide nanocomposite films	48
In‐situ reduction method to build Chitosan@silver nanoparticles and its application for bis(2‐hydroxyethyl) terephthalate‐based polyurethane composite films with excellent antibacterial and	47
Optimization of Nile rose role as a bio‐filler for green natural rubber composites	47
Fused deposition modeling of carbon‐reinforced polymer matrix composites: A comprehensive review	47
Construction of “hard‐soft‐hard” structures with ammonium cerium nitrate/sodium alginate/carbon nanotubes on carbon fiber surfaces for superior mechanical	47
Recent developments in lignin modification and its application in lignin‐based green composites: A review	46
Molybdenum Disulfide‐Functionalized Multiwalled Carbon Nanotubes Based Epoxy Coating on Epoxy/Carbon Fiber Laminates for Improved Erosion Resistance	46
Post‐curing effect on the mode I fracture toughness of the glass/epoxy laminates	46
Fabrication and investigation of graphene‐loaded triiron tetraoxide/silicone‐rubber electromagnetic shielding composites based on static magnetic‐field–induced orientation	46
Construction of Energy‐Efficient Electro‐Thermal Anti‐Icing/De‐Icing System for Composite Wings Based on MWCNT Films	45
Fast and accurate prediction of cure quality and mechanical performance in fiber‐reinforced polymer composite using dielectric variables and machine learning	45
Polytetrafluoroethylene composites with a novel combination of reinforcing filler and solid lubricant and study of their tribological and thermo‐mechanical properties for dynamic applications	45
The influence of GNP on the mechanical and thermomechanical properties of epoxy adhesive: Pearson correlation matrix and heatmap application in data interpretation	45
Enhancing resistance welding strength of carbon fiber/polycaprolactam thermoplastic composites through coupling agent‐modified metal heating elements	44
Delamination of MXene using biomolecule: An effective strategy toward the utilization of delaminated MXene as fillers in polymer composites	44
Preparation and characterization of a multifunctional film with excellent UV shielding, antibacterial and antioxidant capabilities containing cinnamaldehyde and titanium dioxide (TiO	44
Load‐Bearing Capacity and Failure Mode of L‐Shaped Laminates: The Role of Delamination Defect Location and Fiber Bridging	43
The post‐buckling analysis of cylindrical polymer fiber‐reinforced composite tubes subjected to axial loading fabricated by filament winding technology	43

Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates	43
Constructing Graphene and Carbon Nanotube “Artery–Vein” 3D Structures on the Surface of Carbon Fibers Using a Magnetic Field to Prepare High‐Strength	43
Sensitivity Analysis of the Elastic Properties of Graphene/Fiber‐Reinforced Nanocomposites	42
A novel wear‐resistant diamine type polybenzoxazine composites reinforced by modified poly(p‐phenylene supported benzodioxazole) (PBO) fiber and polytetrafluoroethylene (PTFE)	42
Meso‐Scale Modeling for Progression of Damage in Stitched and Unstitched Composites Subjected to Tensile and Compression Loads	42
Analysis of impact response and damage evolution in multi‐scale of novel 3D carbon fiber‐reinforced polyetheretherketone composites	41
Novel reinforced wood material with a biomimetic hierarchical square honeycomb structure under quasi‐static loading: Simulation and experimental study	41
Influence of Temperature Profile on Crack Evolution in Constrained Thermoset Matrix Curing	41
On the nonlinear buckling and postbuckling responses of sandwich FG‐GRC toroidal shell segments with corrugated core under axial tension and compression in the thermal environmen	41
Piezoelectric nanocomposite films based on anionic waterborne polyurethane and barium titanate nanoparticle: Fabrication, microstructure, and property characterization	41
Flow ‐Induced Microstructure Manipulation for Thermal‐Humid Performance Enhancement in Quantum Dots Luminescent Composite	41
Low velocity impact study of vacuum bag infused bouligand inspired composites	41
Wear‐Resistant Epoxy Coatings With KH550 ‐Functionalized SiC @	41
Enhancing damage resistance in tubular triaxial hybrid braided composites: Innovative production and tensile modulus prediction with damage analysis	41
The influence of geometric characteristic on the pullout behavior of basalt FRP minibar embedded in concrete	40
A multiscale modeling framework for predicting strain‐dependent electrical conductivity of carbon nanotube‐incorporated nanocomposites considering the electron tunneling effect	40
Dielectric, transparent, thermally stable and mechanically robust bionanocomposite films based on chitosan and modified cellulose nanocrystals	39
Free vibration of functionally graded composite doubly‐curved shells with embedded polymeric viscoelastic core	39
A Study on the Bending Recovery Characteristics of CFRP Curved Beams in Relation to Interlayer Shear and Crack Friction Behavior	39
Multifunctional lightweight PANI/Ti₃C₂T_x‐PVDF composite foam for efficient microwave absorption	39
Mechanical and Thermal Performance of SLA ‐Printed Ceramic‐Reinforced Lattice Structures: A Topology‐Material Synergy Approach	39
Dual experimental‐numerical approach to improving creep resistance in glass fiber reinforced polymer composites using cellulose nanocrystals	39
Tailoring the crystallization, viscoelastic, and thermal degradation properties of polypropylene by nano‐tungsten carbide and multiwalled carbon nanotubes	39
Improved electromagnetic interference shielding properties of poly (vinylidene fluoride) composites based on carbon nanotubes and graphene nanoplatelets	39
Characterization of biobased epoxy resins to manufacture eco‐composites showing recycling properties	39
Reliability‐Oriented Optimization of Composite Drill Pipes Using Integrated Finite Element and Reinforcement Learning Framework	38
Polypropylene/Boron Nitride Insulating Composites With High Thermal Conductivity and Breakdown Strength	38
Hybridization effect of silane treated basalt fiber on the mechanical, thermal and morphological properties of polypropylene/bamboo composite	38
Optimizing mechanical properties in carbon fiber reinforced thermoplastic composites: The role of fabric structure	38
Structure and functional properties of aluminum hydroxide reinforced bamboo‐derived cellulose acetate composite film for biodegradable packaging	38
A compendious review on fatigue properties of the bio‐nanocomposites	37
Influence of LPRE on the size‐dependent phase velocity of sandwich beam including FG porous and smart nanocomposite layers	37
Preparation and characterization of novel bio‐based polyamide 5.6 composites as sustainable alternatives to petroleum‐derived polyamide 6.6	37
Synthesis of functionalized ZnO nanoflake loaded polyvinylidene fluoride composites with enhanced energy storage properties	37
Novel hybrid polymer composites for optimized thermal performance in electric vehicle battery cases	36
Flexible hexagonal boron nitride@liquid metal/polydimethylsiloxane composites with excellent thermal conductivity and superior mechanical properties	36
Vibration modals of composite auxetic honeycomb sandwich cylindrical shells	36
Ultra‐high power density in poly(arylene ether nitrile)‐based composites containing barium titanate and boron nitride nanosheets	36
Preparation and properties of antibacterial biomaterial PAA/TiO₂/Ag	36
Preliminary Experimental Behavior of Bio‐Epoxy Polymer Impregnation on Curaua Fibers Against Glass Fibers	36
A Novel Strategy to Enhance the Mechanical Properties of UHMWPE Fiber Composites	36
Development of stab resistant armor for different energy levels using shear thickening fluid reinforced multi‐layered p‐aramid fabrics	36
Weibull reliability plots to study the strain rate effect on interfacial strengths of carbon fiber reinforced epoxy composites	36
Robust Generalized Model for Low‐Velocity Impact Damage in Composite Laminates	35
Elucidating Ionic Liquids Functions at the PPS /Basalt Interphase: Sizing Versus Modifier Effects	35
Fiber tension prediction and control methods in automated fiber placement	35
Constructing independent CNTs conductive network to boost combustion performance of metastable intermixed composites	35
Study on the Damage Evolution Mechanism of Fiber‐Reinforced Composite Pipe Under Tensile Load	35
Research on the Feasibility and Interfacial Investigation of Self‐Resistance Heating Technology in Carbon‐Fiber/PMMA Composites	35
Multi ‐Axial Compression Analysis of Novel Three‐Dimensional Six‐Directional Braided Composites by Structural Optimization Design	34
Modulation of Structural, Optical and Electrical Properties of Polyaniline Through SnO ₂	34
Carbon Fiber Reinforced PA6 Composites With Aramid Nanofiber‐Encapsulated Magnetic Interfaces for Synergistic Enhancement of Mechanical and Microwave	34
Lay‐up defects inspection for automated fiber placement with structural light scanning and deep learning	34
Flame retardant characteristics of natural fibre reinforced polymer composites: A thematic review	34
Tribological and mechanical properties of nanofilled glass fiber reinforced composites and analyzing the tribological behavior using artificial neural networks	34
Uncertainty quantification of compressive after impact strength in laminated composites using improved Bayesian ResNet deep learning model	34
Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design	34
Investigation on piezoresistive properties of reduced graphene oxide treated glass textiles based multifunctional sensors	34
Research on the lightweight design and multilevel optimization method of B‐pillar of hybrid material based on side‐impact safety and multicriteria decision‐making	34
Modeling of Tunneling Distance Among Nearby Carbon Nanofibers to Control the Tunneling Resistance and Electrical Conductivity of Composites	34
Effect of geometric configurations and curvature angle of corrugated sandwich structures on impact behavior	34
Mechanical properties of carbon‐aramid hybrid fiber‐reinforced epoxy/poly(vinyl butyral) composites	34
Low‐dielectric and low‐temperature curable fluorinated nano carbon/polyimide composites with 6‐aminoquinoline for end capping	34
Issue Information	34
Remarkably Enhancing the Bonding Performance of Aluminum Alloy/ CFRE Hybrid Joints by Directionally Inducing Covalent Bonds and Mechanical Interlocki	33
Effect of environmental temperature and semi‐crystalline order on the toughening of polyamide 1010 by 2D nanomaterials	33
Monitoring and verification of micro‐strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory	33
Multifunctional Epoxy/ HGM / MXene Composites Integrating Impact Resistance, Electrical Insulation	33
Designing Bouligand‐inspired reinforcement for creating wood fiber‐reinforced composites with excellent bending properties	33
ZnO@C/PEDOT ‐Modified Carbon Fibers for Synergistic Enhancement of Mechanical and Electromagnetic Interference Shielding Properties of Carbon Fiber Composites	33
Mahua oil cake microcellulose as a performance enhancer in flax fiber composites: Mechanical strength and sound absorption analysis	33
On low velocity impact response of Sandwich composite with jute/epoxy facesheet and cenosphere reinforced functionally graded Core: Experimental and finite element approach	33
Enhanced dielectric properties of nanocomposites with cyanoethyl cellulose and core‐shell structured BaTiO₃@Al₂O₃ fillers	33
Tough Photopolymerizable Resin Matrices for Additively Manufactured Continuous Carbon Fiber‐Reinforced Composites	33
Real‐time observation of microcrack growth in thin film microtomed from rubber/nanocellulose composite sheets, during tensile deformation	33
Deformation and energy absorption properties of hollow glass microsphere/polyurethane lightweight core reinforced carbon fiber tubes under lateral compression	32
Influence of alkali treatment on the interfacial shear strength of Agave lechuguilla fiber and its significance as a reinforcing material in polymer composites for mechanical applications	32
Issue Information	32
Evaluating the effectiveness of fusion bond repairs on impact damaged thermoplastic composites	32
Spray binder for automated preforming: Spray process and preform properties	32

	32
The preparation of rigid hybrid silicone resins by combining carbon nanomaterial loading nanoparticles	32
A micromechanical study on shear performance of unidirectional composites with randomly distributed fibers in the transverse cross‐section	32
Investigation of microstructural and mechanical properties of weld lines in injection‐molded short glass fiber‐reinforced polyamide 6	32
A method of obtaining anisotropic loss factors of carbon fibers by indirect fitting	32
Ultralong hydroxyapatite nanofibers/organics composite film for improving its mechanical property: Effect of proportions	32
Viscoplastic deformation of cotton fabric‐reinforced polypropylene composites	32
Synthesis and characterization of sea urchin spike strengthened grape seed oil‐epoxy composite coating material	31
Production and Performance Evaluation of a Novel Ionic Electroactive Polymer Actuator With Ag/ RGO Electrodes	31
Effect of fumed silica and halloysite nanoparticles on the microstructure, mechanical, and fracture properties of thermoplastic polyolefin elastomer toughened polypropylene	31
Experimental investigation on mechanical performance of PVC foam‐based E‐glass isophthalic polyester composites	31
Mechanical performance of adhesively bonded carbon fiber reinforced boron‐modified phenolic resin plastic‐titanium single‐lap joints at high temperature	31
Through‐thickness tensile characterization and analysis of fiber‐reinforced polymer composites using digital image correlation and finite element modeling	31
Evaluating the Influence of APTES ‐Treated Glass Powder on Shear and Vibrational Characteristics of Co‐cured Composite Joints	31
Rare earth doped strontium aluminate/poly(methyl methacrylate) composites for lighting with long persistent luminescence and high tensile performance	31
Insight into the relationship between interfacial structure and thermal conductivity in epoxy resin/Al₂O₃ composite	30
Integrating machine learning and digital twin for strength prediction of CFRP/aluminum adhesive joints under hygrothermal conditions	30
Thermal conductivity and heat transfer mechanism of epoxy composites constructing by carbon fiber felt with three‐dimensional layered structure	30
Positive Temperature Coefficient Heating Material With Novel Low Curie Temperature and Low Room‐Temperature Resistivity	30
Excellent gas barrier property of reduced graphene oxide/nitrile butadiene rubber composite film with high reduced graphene oxide content	30
Improving Polarization Hysteresis to Enhance Dielectric and Energy Storage Performance of Polyvinylidene Difluoride‐Based Nanocomposite Films	30
Advanced biodegradable thermoplastic elastomer/reduced graphene oxide nanocomposites by in situ compositing process	30
Interface enhancement and distribution of carbon fibers in injection welding	30
A review of the mechanical property, durability, and modification of carbon‐ and glass‐fiber reinforced polyurethane composites	30
Study on the thermal assistance friction stir lap welding of aluminum alloy and CFRTP	30
Norbornenyl‐Modified Nanosilica for Reinforced Polydicyclopentadiene Composites	30
Interfacial Chemistry Behind Damage Monitoring in Glass Fiber‐Reinforced Composites: Attempts and Perspectives	30
Synergistic Enhancement of Mechanical and Thermal Properties in Graphene Oxide/Epoxy Composites via π‐π Stacking‐Induced Ordered Adsorption Layer	30
Investigate of shock wave mitigation performance of nano‐carbon fillers modified epoxy composites	30
Synthesis and characterization of novel epoxy‐urethane coating and its graphene nanocomposites	30
Fabrication of solid polymer electrolyte based on carboxymethyl cellulose complexed with lithium acetate salt as Lithium‐ion battery separator	30
Investigating long‐term creep in a composite pipe subjected to transverse loading and aqueous condition	30
An adaptive activation energy method for predicting resin curing behavior and thermal overshoot in thick CFRP plates	29
Synthesis, characterization and microwave absorption properties of BaFe₁₂O₁₉/Ni_0.5Mn_0.5Fe₂O₄@ polyaniline nanocomposites wi	29
Tailoring the Flexural Performance of Additively Manufactured Carbon/Glass Fiber Hybrid Composites: Synergistic Optimization of Hybrid Ratio and Ply Stacking Sequence	29
A novel thermoplastic material: Pre‐polymerized PMMA liquid resin and continuous glass fiber‐reinforced composite initiated by benzoyl peroxide/N,N‐dimethylaniline	29
Multiscale Simulation of the Mechanical Response of 3D Carbon Fiber Braided Composites Considering Porosity and Temperature Effects	29
Green Carbon and Hexagonal Boron Nitride Heterostructure Reinforced Epoxy Composite With Improved Thermomechanical Properties and Anticorrosive Performance	29
Investigation on preparation and mechanical properties of carbon fiber fabric/hollow glass beads/epoxy resin sandwich composite laminates	29
An experimental methodology to characterize the multiaxial failure of short‐fiber reinforced thermoplastics	29
Effect of environmental humidity on the creep behavior of flax fiber‐reinforced polymer composites	28
Shape recovery and energy absorption properties of 3D printed continuous ramie fiber reinforced thin‐walled biocomposite structures	28
Damage identification and localization of pultruded FRP composites based on convolutional recurrent neural network and metaheuristic intelligent algo	28
Optimization of Process Parameters for Thick‐Section Composites: A Case Study for Leaf Spring Manufacturing	28
Mechanical, surface morphological, and thermal properties of Musa acuminate peduncles fiber reinforced polyester composites: Fiber loading and alkalization impact	28
Solid Particle Erosion and Predictive Modeling of Epoxy Composites Reinforced With Diatom Frustules	28
Verification of Mechanical Properties of Aerospace CFRP Composites Under Vibration‐Microwave Curing Process	28
Surface Grafting of Amino Terminated Dendrimers on Carbon Fibers and Their Influence on Interfacial Properties With Epoxy Resin	28
Surface‐Inner Structure Engineering in Fast‐Growing Wood via Vacuum‐Dipping Impregnation for Fabricating High Performance Wood‐Based Composites	28
Process Parameter Optimization for Interfacial Performance of CFRT Foam Core Sandwich Structures via Microcellular Inj	27
Adjusting the lattice spacing and sandwich structure design of molybdenum disulfide nanosheets synergistically enhances the electrical properties of polyimide based composites	27
Experimental and simulation studies of hybrid MWCNT /montmorillonite reinforced FDM based	27
Natural fiber‐reinforced light composites for the automotive industry	27
Static and dynamic mechanical behavior of intra‐hybrid jute/sisal and flax/kenaf reinforced polypropylene composites	27
Curing, thermal, tensile and flammability characteristics of sepiolite/ethylene propylene diene monomer rubber composites with glut palmitate salt and silane coupling agents	27
Tensile properties and failure mechanism of basalt fiber reinforced aluminum alloy laminates at different temperatures	27
Characteristics and degradability of laser print waste paper fiber reinforced PLA resin matrix composite materials	27
Direct Pellet Extrusion of Calcined Seashell Particle Reinforced Polylactic Acid Composite	27
Surface modification of basalt fiber using to reinforce polycarbonate composites and its mechanical performance	27
Ultraviolet cross‐linked ultra‐high molecular weight polyethylene fiber laminate: Preparation and mechanism analysis for its excellent mechanical properties	27
Post‐curing and fiber hybridization effects on mode‐II interlaminar fracture toughness of glass/carbon/epoxy composites	27
Study on the structure and γ‐ray shielding performance of polypropylene/PbO composites with heterogeneous networks	27
Study on the heating mechanism and macro/micro properties of composite materials under microwave curing	26
Decentralized approach for incorporating waste wind turbine blades into 3D printing filaments using mechanical recycling	26
Bio‐Silica Reinforced Cardanol‐Vanillin Based Polybenzoxazine Composites for Thermal, Hydrophobic and Corrosion Resistant Applications	26
Constructing Multiscale Interfaces With External Flexibility and Internal Rigidity in Carbon Fiber Composites: A MOF ‐On‐ MX	26
Development of high‐strength carbon fiber/thermoplastic epoxy resin composites and it's recyclability	26
Preparation and properties of resin matrix composites reinforced by high thermal conductivity graphite films	26
Dual Interfacial Engineering of Glass Fiber‐Reinforced Composites: Synergistic Enhancement via Hyperbranched Polyester‐Modified Resin and Rigid/Flexible Fiber Coatings	26
Elevated Temperature Bending and Creep Performance of 3‐D Reinforced GFRP Composites With Functionalized CNTs	26
Exploring the formability of GLARE laminates enhanced with hybrid nanofillers through formability index, anisotropy, and surface crack length analysis	26
Enabling Rapid Filler‐Free Magnetic Actuation of Shape Memory Polymer Composites Using Woven Carbon Fabrics as Eddy Current Susceptor	26
Salt‐Temperature Corrosion Resistance of BFRP and Load‐Carrying Capacity of Adhesive‐Riveted Hybrid Joints	26
Isolation and characterization of novel agrowaste‐based cellulosic micro fillers from Borassus flabellifer flower for polymer composite reinforcement	26
Recent Advances in the Multifunctional Properties and Applications of Carbon Nanotube/Graphene Hybrid Polymer Nanocomposites	25
Effect of Geometrical Defects of Boron Nitride Nanotubes on Mechanical and Tribological Properties of Nitrile Butadiene Rubber Composites: Molecular Dynamics Simulations	25
	25
Enhancement of Solid Particle Erosion‐Resistance in Carbon‐Fiber Epoxy Composites Using Electrophoretically Deposited Carboxyl Functionalized Graphene on Carbon Fiber	25
	25
Effect of carbon fiber surface properties on carbon fiber/polyphenylene sulfide composite interfacial property	25
Mechanisms of Thermal Ablation in CFRP With Absorption on Complex‐Shaped Reaction Surfaces During Picosecond Laser Irradiation	25
Study on interlayer properties of multilayer complex structures of graphene papers/harness satin weave glass fibers/epoxy reinforced composites with electric heating de‐icing	25
Hybridization effect on the mechanical properties of basalt fiber reinforced ZnO modified epoxy composites	25
A High‐Performance and Sensitive Strain Sensor Based on MWCNT /Epoxy for Micro‐Strain Monitoring of Steel Structure	25
Mechanical Behaviors of CFRP Composite Sandwich Structures With Hierarchical Skins	25
Fabrication and mechanical properties of thermoplastic corrugated sandwich panel with enhanced face‐core interface	25
Experimental and Numerical Investigation of Tensile Mechanical Properties and Failure Mechanisms of 3D Angle‐Interlock Woven Composites at Elevated T	25
An explainable artificial intelligence‐based approach for reliable damage detection in polymer composite structures using deep learning	25
Study on properties influence of carbon fiber reinforced polyimide composites via surface modification using metal mesh	25
Conversion Rate and Mechanical Properties of Polymethyl Methacrylate ( PMMA ) and Its Biaxial Glass Fiber Composites for Wind Turbine Blade	25
Advantages and limitations of active phase silanization in PVDF composites: Focus on electrical properties and energy harvesting potential	25
Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study	25
Dynamic Force Model Based on Material Removal Behavior Affected by Grinding Mode in CF / PEEK Grin	25
Enhanced Electromagnetic Interference Shielding via Magnetic Field–Induced Alignment and Asymmetric Structure Design in Polylactic Acid‐Based Conductive/Magnetic Multilayer Films	25
Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Compone	25