Ceramics International

Article	Citations
Ruthenium-doped ZnO nanostructures: Growth, characterization, and applications in waveguides and light-emitting devices	219
Impact of atomic layer deposition supercycle design on the reliability of heterogenous IGZO channel TFTs	204
Ability of a MoSi2 coating to resist erosion-corrosion from the impact of atomic oxygen	148
Enhanced mechanical performance and residual stress analysis of SiCf/SiC joints via reaction bonding with interconnected SiC nanowires network	147
Identifying key sintering factors for high ionic conductive garnet Li6.4La3Zr2Ga0.2O12 solid electrolytes	147
Structure and thermal expansion in Cu2-Co P2O7	138
Preparation of La2Zr2O7 nanopowders via a novel tartaric coprecipitation method	136
Sintering cracking behavior of nano-ZrO2 ceramics: Effects of binder, heating rate, and Y2O3 doping concentration	133
Using tetraethyl orthosilicate to tailor the magnetic properties of hexagonal SrFe12O19 ferrites: A comparative study of liquid and solid additives	132
Realizing high energy storage performance in flexible NKBT-ST film capacitor via control of the sodium-to-potassium ratio	131
Blue-light-excited broadband near-infrared garnet Ca3Zr2Ga2SiO12:Cr3+/Yb3+ phosphors for high-performance pc-LED applications	129
Ultra-fast laser scanning achieves high-strength joining of glass and Al/Al-Alloys	129
Enhanced microwave absorption through structural and magnetic optimization in Sm-doped BiFeO3 composites	127
Effect of Bi3+-rich doping on notable ferroelectric properties and wide bandgaps of BiFeO3 thin films	126
Phase composition, microwave dielectric properties, and bond characteristics of Na2Mg5(Mo1-xWxO4)6 ceramics with low sintering temperature	124
Preparation of pressureless-sintered dense cordierite ceramics with high flexural strength by mesoporous powder	123
Temperature dependence of two-dimensional structural evolution of monocrystalline 6H-SiC with vacancy and processing defects	122
Niobium doping as a pathway for tuning the optical properties of cobalt ferrites	122
Thermal cycle test of functionally graded and composite environmental barrier coatings in the steam environment	121
Effects of silicon nitride (Si3N4) incorporation on physicochemical, bioactivity and antibacterial properties of 45S5 bioactive glass	120
Cerium as a crystalline phase stabilizer of α-TCP and its hydration and photothermal properties	120
Corrigendum to “Micromorphology tunable Eu2O3 submicron spheres reinforced boron-containing HDPE composites for neutron and gamma-ray complex radiation shielding” [Ceram. Int. 51 (2025) 2360–2372]	118
Engineering deep-red Al20B4O36:Cr3+ phosphors for photomorphogenesis	118
Enhancing sintering activity and grain boundary conductivity of GDC electrolyte via fiber-like precursor morphology and CaO addition	118
Layered rare-earth stabilized Bi2O3: Organic amines intercalation under ambient conditions and their role as a solid adsorbent for iodine	118

Effect of boron on phase, nanostructure, and thermal stability of polycarbosilane-derived SiC ceramics	117
Near-infrared-emitting (Gd1-Nd )3(Ga1-Cr )5O12 glass ceramic phosphors for light-emitting diodes	115
The high temperature dielectric properties and temperature rise behavior of lithium hydride in microwave field	113
Step-type charge transfer path enhanced photothermal catalytic hydrogen production performance of 3D/2D Mo2C/ZnIn2S4 composites	110
Tristate ferroelectric memory in PZT-based films from antiferroelectric-ferroelectric phase transition	107
The effect of GaP quantum dot luminescent addition on the superconducting properties and electron-phonon coupling in MgB2	105
High brightness and light uniformity Tb3Al5O12: Ce3+, Gd3+ phosphors@silica aerogel composites with unique laser scattering performance for laser-driven lighting	104
Eu2+/Dy3+ co-doped SrAl2O4 phosphor for delayed high-resolution X-ray imaging	103
Effect of proton and neutron irradiation on the structure and properties of ZTA composite ceramics	100
Donor-acceptor co-doped Ba0.675Sr0.325TiO3 filled Poly(vinylidene fluoride) demonstrating significantly enhanced tunability for tunable device applications	99
Low temperature joining of SiC ceramic using sandwich-structured TiSi2-Ti3SiC2-TiSi2 filler	98
Influence of cobalt substitution at Ni site: On structural, magnetic, electrical and Mössbauer studies of SrNi2Fe16O27 W-type hexaferrites	97
Corrigendum to “Novel B4C supports for ceramic membrane filtration” [Ceram. Int. 50 (2024) 50436–50443]	94
Relaxation behaviour, conductive grains and resistive boundaries of bismuth-based double perovskite Bi2-xLaₓFeGaO₆	94
Corrigendum to “Low-temperature pressureless sintering B4C with Si aids: Is it feasible?” [Ceram. Int. 51 (2025) 18203–18211]	93
Heat radiation mitigation in rare-earth pyrosilicate composites: A first principles investigation of refractive index mismatch	92
Zinc doped calcium phosphate-sulfate hydroxyapatites: Synthesis, characterization, bioactivity, cytotoxicity and antibacterial properties	92
Probing the structure of divalent impurity cations doped ceria nanocubes for photocatalytic activity	91
Electron-lattice coupling and double exchange effects to improve TCR of La0.67-Nd Ca0.25Sr0.08MnO3 films grown on La0.3Sr0.7Al0.65Ta0.35O3 substrates	91
Effect of CCTO nanofillers on structural and electrical properties for bone regeneration applications in PVDF/HAP/CCTO composite films	90
Dual-crosslinked architecture in silica-based aerogels with self-ceramization for superior thermal insulation at high temperatures	90
Colorimetric investigations and optical properties of Co-doped ZnO nanopigments prepared by gelatin-based sol-gel method	90
Influence of dissolved oxygen concentration on the electrochemical and semiconductor characteristics of passive oxide films deposited on Fe-based metallic glass coatings	90
Impact of mixed heavy metal cations (Ba and Bi) on the structure, optical and ionizing radiation shielding parameters of Bi2O3–BaO–Fe2O3–SrO–B2O3 glass matrix	89
Damage characteristics and material removal mechanisms of SSiC scratched by diamond grits: comparison with RB-SiC	89
Influence of mixed valence B-site cations on the microstructure and electrical transport properties of La2MgMnO6 ceramics	89
Enhanced domain switching contributing to large strain response in (Bi0.5Na0.5)TiO3–SrTiO3 lead-free thin films	88
Enhanced mechanical, corrosion, and tribological properties of hydroxyapatite coatings for orthopedic and dental applications	88
Enhanced mechanical properties and microstructural evolution of Si3N4-Si3N4 joints using TiZrHfTa interlayer via diffusion bonding	88
Exploring the influence of La3+ ion substitution and Zn2+ doping on structural, luminescent, and morphological properties of SrY2O4:Dy3+	87
Theoretical and experimental study of the optoelectronic, thermodynamic and vibrational properties of the nanostructure of m-WO3	87
Preparation and comprehensive performance of carbon fiber reinforced silica-based ceramic cores	87
Synthesis, structure and luminescence properties of PbLaTb(WO4)4 phosphor ceramics for LEDs applications: Role of Tb rare earth	86
Enhanced performance of MoS2 phototransistors with ferroelectric HfLaON as gate dielectric through NH3-plasma treatment followed by rapid thermal annealing	86
Exploring the ambient metastability of yttrium substituted Bi2O3 electrolyte materials	85
Fabrication of Ti3C2Tx/ZnONPs composite with high antibacterial and antibiofilm activity	85
Highly robust and porous cathode current collecting layer for flat-tubular solid oxide fuel cell stack applications	85
Construction of TiO2 nanointerfaces in Yb2Si2O7 ceramics with adjustable electromagnetic wave absorption and high-temperature stability	84
Low-temperature fabrication of porous SiC/cordierite composite ceramics from open-celled porous geopolymers	84
Optimization of SiC–ZrC high emissivity composite flexible coating for thermal protection with high interfacial bond strength and temperature resistance	83
Analysis of the effect of cationic ratio Bi3+/Fe3+ on the magnetic and multiferroic properties of BiFeO3 nanoparticles synthesized using a sonochemical-assisted method	83
Chromium-doped ZnO nanoparticles synthesized via auto-combustion: Evaluation of concentration-dependent structural, band gap-narrowing effect, luminescence properties and photocatalytic activity	83
Phase transition, leakage, dielectric permittivity and polarization switching of Al1-xScxN films in a wide Sc concentration range	83
The microstructural characterization and mechanical response of YSZ ceramic foams fabricated via volume-controlled foaming	82
Fabrication of porous forsterite-spinel-periclase ceramics by transient liquid phase diffusion process for high-temperature thermal isolation	82
Investigation on bi-layer coating with La2(Ti0.2Zr0.2Sn0.2Ce0.2Hf0.2)2O7/YSZ prepared by laser cladding	81
Thermally enhanced near-infrared luminescence in CaSc2O4: Yb3+/Nd3+ nanorods for temperature sensing and photothermal conversion	81
Properties of barium zirconate sintered from different barium and zirconium sources	80
Liquid phase sintering of alumina–silica co-doped cerium dioxide CeO2 ceramics	79
A laboratory study to assess the physico-chemical properties of hydraulic calcium silicate-based sealer modified with hydroxyapatite	79

Prediction of thermodynamic stability of actinide compounds by machine learning model	78
Facile preparation of fully amorphous bulk PbO-Ga2O3 system for direct photon-charge conversion X-ray detector with low dark current and high photocurrent	78
Microstructure and long-term corrosion resistance of plasma-sprayed FeCrMoCB metallic glass/Al2O3-13 wt%TiO2 composite coatings with sandwich-like and dispersed structures	78
MOF nanosheet array-derived NiS with Co, N-doped carbon layer: A highly efficient oxygen evolution electrocatalyst	78
Ultraviolet light charged and self-powered mechanoluminescence of KMgF3: Tb3+ glass ceramics in various media	77
Enhanced optical temperature sensing performance based on dual emission centers of Y2O3: Yb3+, Tm3+, Ho3+ upconversion phosphor	77
BiO2-x@Fe nanospheres for enhanced degradation and antibacterial performances using synergistic photocatalysis and Fenton effect	76
Dual-modified catalytic core-shell structure biomass carbon cotton fiber extends broadband electromagnetic waves absorption applications	75
Effect of calcium carbonate on the thermal shock behavior of YSZ-based abradable sealing coatings	75
Crystal structure, chemical bonds and microwave dielectric properties of ultra-low loss Li2Mg2GaTi2O8F ceramics	75
Preparation of X5R type Ni-MLCCs and capacitance response to combined out-field variations	75
Dielectric relaxation and electrothermal charge carrier transport via correlated barrier hopping in the solid electrolyte TlFeP2O7: Experimental and theoretical modeling	74
Enhanced photoresponse in Type-II MoSe2/WS2 layered heterostructures	73
Zn-Co co-doped spinel ferrite and strontium hexaferrite nanocomposites obtained by “one-pot” green sol-gel synthesis: A study of the ferroelectric, magnetic and electrical properties	73
Structure and sintering behavior of BaO–SrO–B2O3–SiO2 sealing glass for Al2O3 ceramic substrates	73
Synergistic ceramicization and flame retardancy in eco-friendly EVM composites: A high-performance strategy based on sintering process optimization	73
Effects of nitrate-free synthesis on the crystallization and morphology of gel-derived bioactive glass-ceramic with 45S5 composition	73
A novel methodology for evaluating high temperature gas corrosion of oxide-C refractories	73
Combinatory effects of donors and acceptors dopants on the dielectric and piezoelectric behavior of doped PZT-SNYNM ceramics	73
Biosynthesis of novel NiFe12O19-X (X = ZnO and TiO2) magnetic nanophotocatalyst toward the degradation pharmaceutical ceftriaxone sodium from aqueous solution under sunlight irradiation and antibacter	73
ZnO, Al/ZnO and W/Ag/ZnO nanocomposite and their comparative photocatalytic and adsorptive removal for Turquoise Blue Dye	73
Enhanced thermal shock resistance of Al2O3-MgO castables by LaAl11O18 interfacial layer: The effects of concentration of precursor solution	73
Alteration in structural, spectral, magnetic and dielectric properties of cobalt ferrite NPs through manganese substitution	72
Strontium titanate and its flexible polymer composite film: Enhanced biological, mechanical, and photocatalytic performance	72
Dynamic compressive strength of alumina ceramics	72
A novel high-efficient NIR emitting phosphor Ca2YAl3Ge2O12:Cr3+ enabled by chemical unit co-substitution	72
Influence of secondary pre-sintering on sintering shrinkage and piezoelectric properties of PLSBZT multilayer ceramic actuators	71
Effect of barium strontium titanate modification on the dielectric-breakdown properties of phenyl-vinyl binary composite silicone rubber	71
Synergistic enhancement of strength and plasticity in SnSe via size-effect-triggered multiple slip activation	70
Efficient green light-emitting diodes based on alloy quantum dots with an organic/inorganic hybrid surface passivation	70
Improved optical properties of BN powder shielded Ce:YAG ceramics prepared by hot pressing	70
Investigation on the microstructure and high-temperature properties of AlN coating through oxygen addition	70
Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices	69
Developing an efficient energy transfer host for the controllable doping of Ho3+ in Cs2NaLuCl6 via Ag+/Bi3+ co-doping	69
Properties and microstructure evolution of unfired Al–Si incorporated Al2O3–C slide plate materials with trace nano-Al2O3 particles	69
The influence of Ti: Si3N4 ratio on the microstructure evolution of Ti–Si3N4 reaction in Cu melts	69
Dielectric breakdown strength of pore-induced alumina substrates	69
Role of cations in the photovoltaic performance optimization of ternary stannates, MSnO3 (M = Ca, Sr, and Ba) and N2SnO4 (N = Ca, Sr, Ba, and Zn)	68
Pulse energy-storage performance and temperature stability of Bi2O3-added BaTiO3 based ceramics	68
Mixed phase FeTe: Fe2TeO5 nanopebbles through solution chemistry: Electrochemical supercapacitor application	68
Low sintering temperature, large strain and reduced strain hysteresis of BiFeO3–BaTiO3 ceramics for piezoelectric multilayer actuator applications	68
Synthesis of transition metal carbides and high-entropy carbide TiZrNbHfTaC5 in self-shielding DC arc discharge plasma	68
Fast fabrication of mesostructured MCM-41-type nanoparticles by microwave-induced synthesis	68
Cooperative control of sintering shrinkage and strength of stereolithography 3D printed silica-based ceramic cores	67
Visible light-driven type II p-Bi3O4Cl/n-BiPO4 heterojunction for effective photocatalytic photodegradation	67
The importance of ammonium and potassium ions under hydrothermal preparation conditions on the structure and corrosion properties of CaP coatings	67
Reactive hot-pressing of ultrafine dual phase high-entropy (Ti,Zr,Hf,Nb,Ta)C-SiC ceramics with enhanced mechanical properties	67
ln vitro assessment of immunomodulatory and osteogenic properties in 3D-printed hydroxyapatite/barium titanate piezoelectric ceramic scaffolds	67
Microstructure evolution and mechanical properties of SiC/Mo joint brazed with FeCoCrNi high-entropy alloy filler	67
A-site cation deficient SrTa0.1Fe0.9O3-δ as a bi-functional cathode for both oxygen ion- and proton-conducting solid oxide fuel cells	67
Significant improvement in electrical characteristics and energy storage performance of NBT-based ceramics	67
Synthesis, physical, structural, mechanical, and nuclear radiation shielding properties in cerium dioxide reinforced lead-silicate glasses	67
Evolution of residual stress of SiCf/Ti17 composites at high temperature evaluated by micro-Raman spectroscopy	66
Broadband electromagnetic wave absorption of Ni0.5Zn0.5Nd0.04Fe1.96O4 ferrites modified by nano-silver particles	66
Dual-phase high-entropy (FeCoNiZn)xV2Oy oxides with promising microwave absorption properties	66
The usability of the brick dust and blast furnace slag in zeolite-based lime mortars in different curing environments	66
B4C-based hard and tough ceramics densified via spark plasma sintering using a novel Mg2Si sintering aid	66
Structure and microwave dielectric properties of Al3+-doped (Zn1/6Ba1/6Ca1/6Sr1/6La1/3)TiO3 high-entropy ceramics system	66
Enhanced dielectric constant and breakdown strength in dielectric composites using TiO2@HfO2 nanowires with gradient dielectric constant	66
Nanoengineering of ZnCo2O4@CoMoO4 heterogeneous structures for supercapacitor and water splitting applications	66
High-pressure and high-temperature synthesis of binderless nanocrystalline WC cemented carbide: Microstructure and mechanical properties	66
Roles of alkali ions in densification process of cold sintered lithium disilicate glass materials	66
Nitrosothiol-functionalized silicate bioceramic scaffolds with enhanced antibacterial property for bone repair	66
Hydration characteristics of phosphoaluminate cement for carbon capture, storage and utilization(CCUS) well cementing and the mechanism of pore and compressive strength evolution	65
Structural, in-situ Raman spectroscopy and XPS studies on ZrW2-Mo O8 ceramics with tunable negative thermal expansion properties	65
Structural characterization, defect evolution and luminescence properties of natural CaF2 under 10 MeV electron irradiation	65
Dielectric properties and impedance spectroscopy of NASICON type Na3Zr2Si2PO12	65
Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning	65
Optical and structural properties of cost-effective nanostructured calcium titanate blue phosphor	65
Phase equilibrium of the CaO–SiO2–Al2O3–Ce2O3 system: A basis for recovering REEs from RE-Containing slag	64
In-situ synthesis of 3D CdMoO4@CdS core-shell structure for efficient photocatalytic degradation	64
Synthesis of ZnO nanoparticles from the medicinal plant Salvia fruticosa Mill.: Green approach for potential biomedical application against Zn deficiency in humans	64
Highly thermally conductive and electrical insulating epoxy-based composites containing oriented ternary carbon/graphene/MgO hybrid network	64
Development and analysis of a high refractive index liquid phase Si3N4 slurry for mask stereolithography	64
Green luminescent Sr3Gd(PO4)3: Tb3+ phosphors for lighting applications	64
Structural, dielectric, electrical and optical properties of Li/Fe modified barium tungstate double perovskite for electronic devices	63
Effect mechanism of mono-particles or hybrid-particles on the thermophysical characteristics and mechanical properties of Cu matrix composites	63
Effects of raw material homogenization on the structure of basalt melt and performance of fibers	63
Surface quality and milling force of SiCp/Al ceramic for ultrasonic vibration-assisted milling	63
Preparation, microstructure and mechanical properties of steel matrix composites reinforced by a 3D network TiC ceramics	63

Nanosized amorphous and nanocrystalline titania doped by Cr as novel, efficient, and cost-effective cool-colored nanopigments	63
Structure, magnetoelectric, and anticancer activities of core-shell Co0·8Mn0.2R0.02Fe1·98O4@BaTiO3 nanocomposites (R = Ce, Eu, Tb, Tm, or Gd)	63
Structural, BET and EPR properties of mixed zinc-manganese spinel ferrites nanoparticles for energy storage applications	62
Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt	62
Ta/Nb doping motivating cubic phase stability and CO2 tolerance of Sr2Co1.6Fe0.4O6-δ double perovskite for high-performing SOFC cathode	62
Synthesis of forsterite with high strength and low acid solubility using magnesite tailings	62
Curing temperature’s effect on argillite-metakaolin based geopolymer grouts	62
Novel warm/cool-tone switchable VO2-based smart window composite films with excellent optical performance	62
Significantly optimized piezoelectric catalytic properties of surface functionalized Nano-BaTiO3	61
Cobalt removal process from PDC with ultrasonication in neutral electrolyte	61
Effects of high thermal conductivity chopped fibers on ablation behavior of pressureless sintered SiC–ZrC ceramics	61
Multifunctional reusable Ag-decorated ZnO nanostructured photocatalyst obtained by green synthesis	61
Degradation mechanism of cyclic heat storage properties of Al-Si @Al2O3 microcapsules	61
High-temperature tribological evaluation of cobalt-based laser cladded disc for automotive brake systems	61
Electrochemical behavior and microstructural characterization of nano-SiC particles reinforced aluminum matrix composites prepared via friction stir processing	61
Wide working temperature range and large electrocaloric effect in BaTiO3 based ceramics achieved by regulating phase boundaries through a compensatory ion co-doping strategy	61
Carbon deficient (TiZr2HfNbTa)C6-x□x (x=0, 1, 2, 3) high-entropy carbide ceramics designed via cluster formula	61
Performance of Ni–SiC composites deposited using magnetic-field-assisted electrodeposition under different magnetic-field directions	61
Evaluating the structure-property correlation in Y1-xNdxFeO3 (0≤x≤0.15) perovskites	61
Microstructure, electrical, and magnetic properties of NiZnCo ferrite co-doped with Bi2O3 and Nb2O5	60
Effects of TiO2 nanobelts addition on microstructure and physical properties of vitrified bonds	60
High-entropy fluorite-structured molybdates for efficient red-emitting phosphors	60
Enhancing thermal conductivity of aluminum nitride ceramics through control of oxygen impurities and heavy rare earth doping: A first-principles and experimental study	60
Evaluation of the hot corrosion stability of perovskite and spinel oxide-based inert anode materials in CaCl2–NaCl–CaO molten salts	60
Optical and structural insights into Ta2O5/n-Si heterojunctions: detailed characterization and material properties	60
Improving the durability and investing failure behavior of TBCs under thermal cycling-CMAS test by Yb2O3 and Y2O3 co-stabilized ZrO2 materials and different processes	60
Effects of (KMg)3+ co-doping and sintering temperature on the negative thermal expansion property of Sc2W3O12 ceramics	60
Enhancing bioactivity, radiopacity, and structural properties of borophosphate glass through barium oxide modification and controlled thermal treatment	60
Additive manufacturing of yttria-stabilized zirconia using digital light processing: Green density and surface roughness analysis	60
Suppressing the phase decomposition of MSZ at 1273 K by doping Al, Ca and Gd oxides	60
Correlation between composition, structure, and acousto-optic properties of As100-xSx chalcogenide glasses	59
Pseudocapacitive properties of cobalt molybdate hydrates with biomimetic shark tooth structures induced by cation doping	59
Energy transfer and a novel SBR thermometry of SrY2O4:Sm3+/Eu3+ phosphor based on redshift of charge transfer band edge	59
Study of Cu-doped zirconia toughened alumina ceramics (Cu-ZTA) subject to lubrication behaviors for arthroplasty	59
Femtosecond laser induced periodic subwavelength nanohole arrays structure on AsSe glass surface	59
Anomalous magnetic behavior of two-phase hexaferrite composite	59
Unleashing the potential of a new Y–BaTiO3/graphene oxide nanocomposites for boosting the dielectric stability at high temperature	59
Microstructural changes and properties of LaxBa(1-x) (Zr0·1Ti0.9)O3 multilayer dielectric ceramics via digital light processing	59
Temperature sensitivity and tunable conduction mechanisms of HfNx thin films	59
Synthesis of novel ZnO − B2O3	59
Joining AlN ceramics by ZnO–Al2O3–B2O3–SiO2 (ZABS) glass-ceramic at low temperature	59
Waste grape skin bio-derived carbon@NiFe2O4 for the environmental pollutants nitrobenzene detection	58
Phase structure, microstructure, and high-temperature large piezoelectric response of 0.69BiFeO3–0.31BaTiO3–xBi(Zn2/3Nb1/3)O3 with typical R–T phase nanodomain and polar nanoregions morphology	58
Improving energy storage performance through structural modulation in Ca0.5(Sr0.5Ba0.5)2Nb4TaO15-based tungsten bronze ceramics	58
Multi-crosslinked network magnesium phosphate bone cement with high flexural properties	58
Enhancing TCR of La0.81Sr0.19MnO3 ceramics by optimizing sintering duration to degrade cation disorder and grain boundary scattering	58
Study of structural, optical properties and band structure analysis of zinc oxide substituted with manganese	58
Low-temperature sintering of ZnTiO3 using CaV2O6 as a liquid-forming additive for LTCC applications	58
Enhancing SiC/Nb brazed joints by negative thermal expansion (Sr0.2Ba0.8)TiO3 nanoparticle-coated Cu foam	58
Pt loaded CoFe2O4-based nanoparticles for breast cancer treatment with chemodynamic therapy and sonodynamic therapy	58
Low-temperature spark plasma sintering and mechanical properties of α-SiC ceramics without additives	58
Tuning phase structure for enhanced electrostrain in Nb5+-doped Bi0.5(Na0.81K0.19)0.5TiO3 lead-free piezoelectric ceramics	58
Combined effects of high-entropy and high-valence ions in oxides for thermistors	57
Effect of doping on the morphology of cerium molybdate: A mechanistic approach towards efficient energy storage and sustainable environmental mitigation through heterogeneous photocatalysis	57
Material properties analysis of high-temperature stable (Nb, Mn)-doped BaTiO3–Bi0.5Na0.5TiO3-based dielectric X8R ceramics	57
The ‘metallic ware’ from Tell el Far'ah North (West Bank): Petrography, technology, and provenance of a hidden ceramic industry	57
Tribocorrosion behavior of magnetron-sputtered MoS2-TiCr composite coatings	57
Carbon composite material made from biomass-derived hollow cotton fiber with double-modified and unique rod-like double-layer core-shell structure for effective electromagnetic wave absorption	57
Effect of coarse-Si-powder addition on the thermal and mechanical properties of sintered reaction-bonded silicon nitride	57
Development of structure-informed artificial neural network for accurately modeling viscosity of multicomponent molten slags	57
Multidimensional structural design realizes synergistic enhancement of mechanical properties and electromagnetic wave absorption of B4C-Graphite-SiCw composites	57
Solar-photocatalytic and bactericidal efficacy of self-assembled Co:ZnO hybrid flower-rod like nanostructures in dye-wastewater remediation	57
The structural evolution and electric field-induced strain performance of Bi0.5(Na0.41K0.09)TiO3–Ba(Fe0.5Sb0.5)O3 lead-free piezoelectric ceramics	57
Composite ceramic coating with enhanced thermal shock resistance formed by the in-situ synthesis of nano-ZrO2	57
Origin of large piezoelectricity in BF-BT based multiphase ferroelectrics	56
Fabrication and characterization of pyrolytic carbons from phenolic resin reinforced by SiC nanowires with chain-bead structures	56
Mechanical characterization of lightweight engineered geopolymer composites exposed to elevated temperatures	56
Radiation attenuation capacity improvement of various oxides via high density polyethylene composite reinforcement	56
Electrochemical detection of p-nitrophenol using glassy carbon electrode modified using high-entropy oxide nanoparticles	56
SiC network reinforced SiO2 aerogel with improved compressive strength and preeminent microwave absorption at elevated temperatures	56
Electronic structure, photocatalytic and electrochemical performance of chalcogenide quantum dots loaded on reduced graphene oxide: (Cu2MnSnS4/rGO)	56
Influence of anatase-brookite composition on photocatalytic degradation of diethyl phthalate	56
Laser Processing of Calcium Manganite-Based Materials for Thermoelectric Generators	56
Fabrication of SiCN(Fe)/Al2O3 wave-absorbing ceramics with enhanced electromagnetic performance	56
Fabrications of metal-insulator nanocomposite TiOx thin films and their dielectric properties	56
Foamed concrete composites: Mn–Zn ferrite/carbon fiber synergy enhances electromagnetic wave absorption performance	56
Post-mortem investigation of magnesia-chromium brick corrosion by speiss in a copper smelting furnace	55
Effect of TiMoTa multi-component diffusion layer prepared by double glow plasma reverse sputtering process on diamond coating growth	55
Improved temperature stability of low-fired Li2Mg3SnO6 microwave dielectric ceramics by using (La0.5Na0.5)TiO3 additives	55
The effect of substrate thickness on the fluorescence of single-doped Cu+ glass prepared by ion exchange	55
Interfacial engineering and defect passivation of SnO2 through agmatine sulfate in carbon-based perovskite solar cells	55
Effects of CCVD parameters on the growth of VACNT over AZO substrate	55
Up- and down-conversion photoluminescence in Nd-doped SiAlON ceramics	55
Direct mechanochemical synthesis of CaMoO4 and Dy3+ doped CaMoO4 nanoparticles and their photoluminescent properties	55
Kaolin supported niobia for microwave-assisted aminolytic depolymerization in the chemical recycling of polyester waste	55
Fabrication of TiB2-HfN/TiB2-HfC laminated ceramics with a novel inner structure - concentric ripple layers	55
Tailoring the pigment properties of spinel-type Zn1-xCoxFe2O4 (0 ≤ x ≤ 1) ferrites synthesized by a sustainable gelatin-based route	55
Tailoring the structural, optical and catalytic properties of ZnFe2O4 by rare earth metals doping and their incorporation into CNTs matrix	54
Graphene/SiO2-reinforced epoxy composite with calcium cross-linking for enhanced thermal conductivity, EMI shielding, and electrical insulation	54
Innovations for brushite cements toward applications in bone regeneration and drug delivery	54
High-strength low-k glass–ceramic composite covers for 6G communication mobile devices	54
Low temperature phase transition mechanism of amorphous Al-oxalate to nano α-alumina	54
Hydrothermal synthesis of Gd-doped CaO nanoparticles from lemon peel extract for efficient photocatalytic degradation of methylene blue under UV and sunlight	54
Tribo-mechanical performance of Al-nano TiC composites processed by microwave-assisted powder metallurgy	54
Ultra-flexible Al2O3 fibers: A novel catalyst support material for sustainable catalysis	54