Journal of Dentistry

Papers
(The median citation count of Journal of Dentistry is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-07-01 to 2025-07-01.)
ArticleCitations
A novel AI-driven tool for automated root canal segmentation of single and bi-rooted teeth on cone-beam computed tomography171
Digital planning of prosthetic finalization in a TMD patient119
Virtual planning and volumetric evaluation of wound healing following regenerative surgical treatment of intrabony periodontal defects118
The Effectiveness of Platelet Rich Fibrin in Alveolar Ridge Reconstructive or Guided Bone Regenerative Procedures: A Systematic Review and Meta-Analysis98
Effect of continuous vs sequential chelation on the mechanical properties of root dentin: An ex vivo study93
Comparison of the colour accuracy of a single-lens reflex camera and a smartphone camera in a clinical context92
Influence of rescanning mesh holes on the accuracy of an intraoral scanner: An in vivo study89
Tooth loss over 13 years of follow-up: Can regular dental visits reduce racial and socioeconomic inequalities?88
Impact of angle on photothermal radiometry and modulated luminescence (PTR/LUM) value87
Are S-PRG composites able to resist against erosive and abrasive challenges and protect surrounding enamel in situ?87
Development of a survey-based stacked ensemble predictive model for autonomy preferences in patients with periodontal disease84
Erosion protective properties of the enamel pellicle in-situ82
Exploring the use of preprints in dentistry82
Healing outcomes of open versus closed flap procedures for collagen membrane coverage following immediate dental implant placements with simultaneous guided tissue regeneration77
Effect of topical applications containing surface pre-reacted glass-ionomer filler on dental hard tissues-A systematic review72
A novel digital technique for maintaining maxillomandibular relations in fixed prosthetic rehabilitations69
Retentive force of conical crowns combining zirconia and fiber-reinforced composite68
In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations65
Effect of prefabricated auxiliary devices in different optical properties and shapes on the accuracy of intraoral scanning of the edentulous arch with multiple implants: An in-vitro study64
In vitro remineralization assessment of enamel subsurface lesions using different percentages of surface reaction-type pre-reacted glass-ionomer containing gum-based material62
How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study62
Finite element analysis of stress distribution in autotransplanted molars61
Prevalence of tooth wear and associated factors: A birth cohort study59
Assessing diagnostic accuracy and monitoring of caries progression using optical coherence tomography (OCT): A systematic review59
Bruxism as a new risk factor of musculo-skeletal disorders?57
Full arch accuracy of intraoral scanners with different acquisition technologies: An in vitro study56
Antibiofilm properties, cytotoxicity, and effect on protease activity of antibiotics and EGCG-based medications for endodontic purposes56
Influence of customized over-scan body rings on the intraoral scanning effectiveness of a multiple implant edentulous mandibular model55
Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive53
Generative deep learning approaches for the design of dental restorations: A narrative review53
Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial52
A modified scan technique for multiple abutment teeth using the trim and lock function51
Accuracy of digital and conventional implant impressions in edentulous jaws: A clinical comparative study50
Trajectories of child free sugars intake and dental caries - a population-based birth cohort study50
Efficacy of adjunctive local periodontal treatment for type 2 diabetes mellitus patients with periodontitis: A systematic review and network meta-analysis50
Influence of periodic polyphenol treatment on the anti-erosive potential of the acquired enamel pellicle—A qualitative exploratory study48
Effect of topical application of ibuprofen/arginine on the in-office bleaching-induced tooth sensitivity: A randomized, triple-blind controlled trial48
Bisphenol A release from short-term degraded resin-based dental materials48
Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial46
Morphology of pulpal mineralizations: A scoping review46
Comparison of intraoral scanning and CBCT to generate digital and 3D-printed casts by fused deposition modeling and digital light processing45
Effectiveness of bioactive resin materials in preventing secondary caries and retention loss in direct posterior restorations: A systematic review and meta-analysis45
Deep learning-based segmentation of dental implants on cone-beam computed tomography images: A validation study44
Dental plaque quantitation by light induced fluorescence technology in exclusive Electronic Nicotine Delivery Systems (ENDS) users42
Digital workflow for a direct restorative procedure using a 4D virtual articulator42
Artificial intelligence serving pre-surgical digital implant planning: A scoping review42
Real-world effectiveness of national pit and fissure sealants program in Taiwan42
Facially driven esthetic rehabilitation and bite elevation for a patient with worn front teeth: a case report41
Construction of dentin-on-a-chip based on microfluidic technology and tissue engineering41
Does curve of Spee affect the precision of 3D-printed curvature-adaptive splints?40
Bruxism and Lifestyle Interaction: an Observational Study40
Effects of an MDP-based surface cleaner on dentin structure, morphology and nanomechanical properties40
Socio-economic status, psychosocial factors, health behaviours and incidence of dental caries in 12-year-old children living in deprived communities in Manaus, Brazil40
Predentine is not a reliable barrier against internal root resorption in the presence of inflammation38
The use of mouthwash containing trimetaphosphate as an adjunct therapy to fluoridated toothpaste reduces enamel demineralization38
Impact of modifications on the characteristics of salivary pellicle on dental hard tissue: a scoping review38
In situ remineralization of enamel caries lesions with a toothpaste supplemented with fluoride, amorphous calcium phosphate casein phosphopeptide and trimetaphosphate38
A novel post-processing strategy to improve the accuracy of complete-arch intraoral scanning for implants: an in vitro study38
Extra-oral assessment of conventional and CAD-CAM complete denture appearance by dental professionals and CRDP wearers: A randomized survey38
Editorial Board37
Trueness and precision of a handheld, a desktop and a mobile 3D face scanning system: An in vitro study37
Association between maxillary sinus floor perforation by dental implants and mucosal thickening: A cone-beam computed tomography study37
Teledentistry with the dental office's mobile application36
Editorial Board35
Can patients detect peri‑implant mucosal inflammation? Results from a multicentre randomized trial35
Environmental impact of the supervised toothbrushing programme amongst children in Scotland34
‘Thermo-mechanical behavior of alternative material combinations for full-arch implant-supported hybrid prostheses with short cantilevers’34
Customized-3D zirconia barriers for guided bone regeneration (GBR): clinical and histological findings from a proof-of-concept case series34
Robotics in endodontics: A comprehensive scoping review34
Automated orofacial virtual patient creation: A proof of concept33
Association between oral health and cognitive impairment in older adults: Insights from a Six-year prospective cohort study33
Anamnestic risk factors for erosive tooth wear: Systematic review, mapping, and meta-analysis33
Current and future trends in the teaching of removable partial dentures in dental schools in Malaysia: A cross sectional study33
Highly targeted electrochemical disruption of microbes with minimal disruption to pulp cells33
Assessing dentists’ awareness of the orthodontic–restorative interface33
Guided implant surgery with R2Gate®: A multicenter retrospective clinical study with 1 year of follow-up32
Effect of silver diamine fluoride and nano silver fluoride on oral health-related quality of life of children with early childhood caries: A randomized clinical trial32
Corrigendum to ‘Influence of the implant scan body bevel location, implant angulation and position on intraoral scanning accuracy: An in vitro study’ [Journal of Dentistry volume 121 (2022) 104122]32
Core outcomes measures in dental computer vision studies (DentalCOMS)32
Patient-reported outcomes following treatment of peri‑implant disease: A systematic review32
Early occlusal caries detection using targeted fluorescent starch nanoparticles32
Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials31
Clinical performance of full-arch implant-supported fixed restorations made of monolithic zirconia luted to a titanium bar: A retrospective study with a mean follow-up of 16 months31
Surface properties and Streptococcus mutans biofilm adhesion of ion-releasing resin-based composite materials31
Analog and digital complete denture bases accuracy and dimensional stability: An in-vitro evaluation at 24 hours and 6 months30
Quality of nutritional uptake of community-dwelling, care-dependent older adults in Zurich30
Prolonged post-washing in ethanol decreases bond strength of additively manufactured crown materials30
3D-printed one-piece versus two-piece orthodontic clear aligner attachments bonded with provisional crowns: A proof of concept30
Effect of different wound closure interventions on the clinical outcomes following immediate implant placement in the aesthetic area: A network meta-analysis based on thirty-four studies29
Chairside virtual patient protocol. Part 1: Free vs Guided face scan protocol29
The diagnostic efficacy of quantitative light-induced fluorescence in detection of dental caries of primary teeth28
Automated pediatric TMJ articular disk identification and displacement classification in MRI with machine learning28
Spin and reporting in systematic reviews with meta-analysis of randomized clinical trials in restorative dentistry28
Clinical outcomes of novel CAD/CAM-designed functional space maintainers produced via additive and subtractive methods: A randomized controlled trial28
“How obsessive are dentists?”––A personality styles & disorder inventory based prospective, controlled study28
Is tele-diagnosis of dental conditions reliable during COVID-19 pandemic? Agreement between tentative diagnosis via synchronous audioconferencing and definitive clinical diagnosis27
Synthetic, non-person related panoramic radiographs created by generative adversarial networks in research, clinical, and teaching applications27
Orthodontic Treatment and Central Incisors: a Study by CBCT Analysis27
Editorial Board27
Impact of scanning interruptions on accuracy of implant-supported full-arch scans: An in-vitro pilot study27
Editorial Board27
The relationship between self-efficacy and oral health status of older adults27
Guided maxillary full-arch implant rehabilitation using a novel chrome cobalt alveolar bone reduction guide26
Quantifying composite restoration removal and cavity re-preparation using novel region-specific volumetric analysis26
Editorial Board26
Digital records for diagnosis and treatment plan in a TMD patient26
In situ evaluation of 200 ppm fluoride toothpaste content trimetaphosphate, xylitol and erythritol on enamel demineralization and dental biofilm26
Full versus semi-digital workflow in case of surgical management of mandibular cyst25
Comparative proteomic analysis of saliva from chewing tobacco users and oral cancer patients reveals shared biomarkers: A case control observational study25
Temporomandibular joint segmentation in MRI images using deep learning25
Association between non-carious cervical lesions, dentin hypersensitivity and anxiety in young adults: A cross-sectional study25
Anti-bacterial and anti-microbial aging effects of resin-based sealant modified by quaternary ammonium monomers25
Survival, technical and biological outcome of fixed tooth- and implant-supported restorations: A retrospective analysis of a patient cohort treated in an undergraduate dental education program25
In vitro effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate on enamel erosive wear25
Thematic analysis of perceptions from both patients and dental students on a digital clinical decision aid in prosthodontics: A qualitative study25
An experimental bleaching gel containing a nanocomposite reduces the intensity of postoperative tooth sensitivity: A randomized, triple blind clinical trial25
Accuracy of surgical templates with and without metallic sleeves in case of partial arch restorations: A systematic review24
The subsurface lesion in erosive tooth wear24
Assessment of silver-copper co-loaded mesoporous bioactive glass as an advanced pulp-capping material24
Impact of the occlusal contact pattern and occlusal adjustment on the wear and stability of crowns24
Accuracy of the intaglio surface of 3D-printed hybrid resin-ceramic crowns, veneers and table-tops: An in vitro study23
Relevant optical properties for gingiva-colored resin-based composites23
Comparing the accuracy of full-arch implant impressions using the conventional technique and digital scans with and without prefabricated landmarks in the mandible: An in vitro study23
Artificial intelligence for osteoporosis detection on panoramic radiography: A systematic review and meta analysis23
Prediction of pulp exposure before caries excavation using artificial intelligence: Deep learning-based image data versus standard dental radiographs23
Lipopeptide biosurfactant as a potential root canal irrigation agent: Antimicrobial and anti-biofilm evaluation23
Artificial intelligence for caries detection: Randomized trial23
Influence of bleaching gels formulated with nano-sized sodium trimetaphosphate and fluoride on the physicochemical, mechanical, and morphological properties of dental enamel22
Degree of conversion of dual-cured composite luting agents: The effect of transition metal-based touch-cure activators22
Inter- and intra-variability in tooth wear progression at surface-, tooth- and patient-level over a period of three years: A cohort study22
Contemporary treatment techniques for excessive gingival display caused by altered passive eruption or lip hypermobility22
Effect of artificial landmarks of the prefabricated auxiliary devices located at different arch positions on the accuracy of complete-arch edentulous digital implant scanning: An in-vitro study22
Innovative Method For Simplifying Dual Scan Technique21
Complex rehabilitation of erosive tooth wear with digital workflows21
Effects of ultraviolet weathering aging on the color stability and biocompatibility of various computer-aided design and computer-aided manufacturing glass–ceramic materials21
Erratum to ‘How French dentists manage defective restorations: evidence from ReCOL the French dental practice-based research network – a survey study’ [Journal of Dentistry 125C (2022) 104244]21
Comparison between intraoral scanner and spectrophotometer shade matching: A systematic review and meta-analysis21
Editorial Board21
Influence of thermo-mechanical aging on fracture resistance and wear of digitally standardized chairside computer-aided-designed/computer-assisted-manufactured restorations21
Corrigendum to “Bonding to dentin using an experimental zirconium oxynitrate etchant” [J. Dent. 108 (2021) 103641]21
A randomized, controlled clinical trial of digitally planned static guided implant placement with 2 years of follow-up21
The Chinese version of the brief pain inventory–Facial (BPI-F) among different populations: Factor structure and measurement invariance21
The Universal scanning guide21
Prediction of post-traumatic neuropathy following impacted mandibular third molar removal20
Influence of a D-enantiomeric peptide on the anticorrosion ability of titanium with different surface roughness against Streptococcus mutans biofilms20
Efficacy of XP-endo instruments in removing 54 month-aged root canal filling material from mandibular molars20
Clinical precision of Aoralscan 3 and Emerald S on the palatal and dentition areas: Evaluation for forensic applications20
Gastrointestinal cholecystokinin signaling pathway drugs modulate osteogenic/cementogenic differentiation of human periodontal ligament stem cells20
Proteomic profile of in situ acquired pellicle on tooth and restorative material surfaces20
Alterations in salivary biomarkers in relation to periodontal health and obesity among Hong Kong adolescents20
Stain removal, abrasion and anticaries properties of a novel low abrasion dentifrice containing micro-fibrillated cellulose: in vitro assessments20
Impact of microabrasion and a remineralizing agent before in-office bleaching on hydrogen peroxide permeability, color alteration, and enamel morphology20
Microstructural dependence of mechanical properties and their relationship in modern resin-based composite materials20
Subgingival microbial changes in Down Syndrome adults with periodontitis after chlorhexidine adjunct non-surgical therapy and monthly recalls–A 12-month case series study20
The impact of mandibular partial edentulous distal extension on virtual occlusal record accuracy when using two different intraoral scanners: An in vitro analysis20
Teaching repair versus replacement of direct composite resin restorations: A cross-sectional study across dental schools in Malaysia20
Oral health effects of non‑combustible nicotine products: a systematic review and network meta‑analysis of randomized controlled trials20
Survival Analysis and Cost Effectiveness of Silver Modified Atraumatic Restorative Treatment (SMART) and ART Occlusal Restorations in Primary Molars: a randomized controlled trial20
The impact of priming on dentally induced social judgements: An experimental study19
Full-arch restoration with the NEXUS IOS® system: A retrospective clinical evaluation of 37 restorations after a one year of follow-up19
Publication bias in randomized controlled trials in dentistry. What factors affect statistical significance of outcomes?19
Fracture resistance of a second generation of zirconia implants after artificial ageing: An in vitro study19
Trueness and precision of complete arch dentate digital models produced by intraoral and desktop scanners: An ex-vivo study19
Tricalcium phosphate (-containing) biomaterials in the treatment of periodontal infra-bony defects: A systematic review and meta-analysis19
Scan accuracy of recently introduced wireless intraoral scanners in different fixed partial denture situations19
Comparison of different artificial landmarks and scanning patterns on the complete-arch implant intraoral digital scans19
Precision of complete-arch digital implant scans using photogrammetry and intra-oral scanning. An in vivo cross-over study.19
Improving the measurement of oral health-related quality of life: Rasch model of the oral health impact profile-1419
Feasibility of using two generative AI models for teeth reconstruction19
Layered deep learning for automatic mandibular segmentation in cone-beam computed tomography18
Antibiofilm and mechanical properties of silver nanowire-modified glass ionomer cement18
Impact of artificial intelligence on dentists’ gaze during caries detection: A randomized controlled trial18
Prevalence of dentine hypersensitivity, erosive tooth wear, gingival recession and periodontal health in seven European countries18
Reproducibility of the digital palate in forensic investigations: a two-year retrospective cohort study on twins18
Chairside virtual patient protocol. Part 2: Management of multiple face scans and alignment predictability18
Optical characteristics of experimental dental composite resin materials18
Positional accuracy of a single implant analog in additively manufactured casts in biobased model resin18
Clinical evaluation of posterior zirconia-based and porcelain-fused-to-metal crowns with a vertical preparation technique: an up to 5-year retrospective cohort study18
The influence of dental bleaching on patient's quality of life: A multistudy analysis of aesthetic and psychosocial outcomes18
The efficacy and safety of an enzyme-containing lozenge for dental biofilm control—a randomized controlled pilot trial18
Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing17
White diet is not necessary during dental bleaching treatment: A systematic review and network meta-analysis of clinical studies17
The effect of single-implant overdentures on cognitive function in older adults: A 3-year follow-up report17
New Digital Environment Supports Endodontic Complications Reduction: Clinically Driven Ergo-Digital Study17
Immunorecognition of Streptococcus mutans secreted proteins protects against caries by limiting tooth adhesion17
The use of antibiotics in the management of odontogenic facial swellings in children and adolescents: A scoping review17
Sugar substitutes on caries prevention in permanent teeth among children and adolescents: a systematic review and meta-analysis17
Accuracy of an artificial intelligence-driven tool for the detection of small edentulous regions on cone-beam computed tomography17
Periodontal breakdown inter-tooth relationships in estimating periodontitis-related tooth loss17
Utilisation of a think-aloud protocol to validate a self-reported periodontitis questionnaire17
Additive or subtractive manufacturing of crown patterns used for pressing or casting: A trueness analysis17
Esthetic Rehabilitation of Patient with Multiple Diastema following Orthodontic Treatment and Maxillofacial Surgery: a Case Report17
MMP inhibition, marginal integrity and cytotoxicity of zinc-releasing GIC17
Global and regional trends in prevalence of untreated caries in permanent teeth: Age-period-cohort analysis from 1990 to 2019 and projections until 204917
Effect of silver diamine fluoride upon the microbial community of carious lesions: A scoping review17
Unveiling the correlation between in vivo endodontic reciprocate instrumentation and crack formation17
Influence of periodic milk or cream treatment on the anti-erosive potential of the acquired enamel pellicle17
AI-based open-source software for cephalometric analysis from limited FOV radiographs17
Can dental fillings affect the performance of an AI-driven innovative tool for automatic tooth segmentation in cone-beam computed tomography: A validation study?17
Evaluation of preheating methods for bulk-fill thermoviscous composite in non-carious cervical lesions: A 24-month randomized controlled trial17
Teaching of posterior composites for the restoration of permanent teeth in undergraduate dental training programmes: Systematic review and meta-analysis17
Bioactivity and antibacterial effects of zinc-containing bioactive glass on the surface of zirconia abutments17
Brazilian primary dental care in a universal health system: Challenges for training and practice17
Anti-biofilm activity of chlorhexidine-releasing elastomerics against dental microcosm biofilms17
Influence of crown shade, translucency, and scan powder application on the trueness of intraoral scanners16
Three-unit CAD/CAM-manufactured lithium disilicate FDPs after an average observation period of 120 months16
Development and validation of a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery16
Associations of general health conditions with masticatory performance and maximum bite force in older adults: A systematic review of cross-sectional studies16
The impact of oral diseases on respiratory health and the influence of respiratory infections on the oral microbiome16
Evaluation of low-crystallinity apatite as a novel synthetic bone graft material: In vivo and in vitro analysis16
Accuracy of a 3D printed sleeveless guide system used for fiber post removal: An in vitro study16
The effect of ferrule and core material on fracture resistance of endodontically treated anterior teeth restored with ceramic crowns after artificial aging16
Cost-effectiveness of school-based caries screening using transillumination16
Basic behavioral management techniques in pediatric dentistry: A systematic review and meta-analysis.16
The potential ‘blue light hazard’ from LED headlamps16
Deep learning for age estimation from panoramic radiographs: A systematic review and meta-analysis16
Influence of alveolar ridge morphology and guide-hole design on the accuracy of static Computer-Assisted Implant Surgery with two implant macro-designs: An in vitro study16
Influence of the dental arch and number of cutting-off and rescanning mesh holes on the accuracy of implant scans in partially edentulous situations16
Implant or tooth? – A cost-time analysis of managing “unrestorable” teeth✰15
Accuracy of the maxillomandibular relationship at centric relation position recorded by using 3 different intraoral scanners with or without an optical jaw tracking system: An in vivo pilot study15
In vitro comparison of five desktop scanners and an industrial scanner in the evaluation of an intraoral scanner accuracy15
Challenges and opportunities in preparing dentists for primary care15
Accuracy of detection methods for secondary caries around direct restorations: A systematic review and meta-analysis15
Augmented Reality Filter to Evaluate Vertical Dimension of Occlusion15
Jet injection needle-free dental anaesthesia: Initial findings15
Evaluation of the fabrication trueness and internal fit of additively manufactured two-piece zirconia abutments with different build orientations compared to subtractively manufactured abutments15
Qualitative and quantitative assessment of tooth wear in young individuals15
Artificial intelligence for caries and periapical periodontitis detection15
Influence of mucosal tissue height on implant crestal bone: A 10-year follow-up of a controlled clinical trial15
Automated detection and labelling of teeth and small edentulous regions on cone-beam computed tomography using convolutional neural networks15
Reflected near-infrared light versus bite-wing radiography for the detection of proximal caries: A multicenter prospective clinical study conducted in private practices15
Digital Analysis of Kinematics and Electromyography during the Masticatory Cycle15
A custom Root Replica Abutment solution to improve emergence profile and maintain peri-implant tissue in immediate implant placement and restoration15
Hygienic maintenance of soft tissues in the treatment of minor recessions: a prospective study and three-dimensional analysis.15
Role of occlusal factors on probable bruxism and orofacial pain: Data from the 1982 Pelotas birth cohort study15
Accuracy of a novel semi-autonomous robotic-assisted surgery system for single implant placement: A case series15
Accuracy assessment of dynamic navigation during implant placement: A systematic review and meta-analysis of clinical studies in the last 10 years15
Pilot clinical study to evaluate the efficacy of a professionally delivered high fluoride varnish on erosive tooth wear in an in-situ model15
Proteomic analysis of stimulated saliva in gastroesophageal reflux disease patients with and without erosive tooth wear: Observational study15
Predictable and Precise Scanning Protocol for Full Arch Implant- Supported Immediate Prosthesis15
Efficacy and safety of peroxide-based mouthrinse on whitening treatment: A randomized controlled clinical trial14
Optical behaviors, surface treatment, adhesion, and clinical indications of zirconia-reinforced lithium silicate (ZLS): A narrative review14
Ethical considerations on artificial intelligence in dentistry: A framework and checklist14
Artificial intelligence-aided detection of ectopic eruption of maxillary first molars based on panoramic radiographs14
A narrative review of cracks in teeth: Aetiology, microstructure and diagnostic challenges14
The effect of high-speed dental handpiece coolant delivery and design on aerosol and droplet production14
Analysis of the accuracy of a dynamic navigation system in endodontic microsurgery: A prospective case series study14
Convolutional neural network-assisted diagnosis of midpalatal suture maturation stage in cone-beam computed tomography14
Prevalence of periodontal disease in pregnancy: A systematic review and meta-analysis14
Artificial intelligence models for periodontitis classification: A systematic review14
0.055305004119873